5316 matches found
Helpful SR CLI commands
Probe the SR: xe sr-probe type=lvmohba device-config:device=/dev/disk/by-id/scsi- xe sr-probe type=lvmoiscsi device-config:target= device-config:targetIQN= xe sr-probe type=nfs device-config:server= device-config:serverpath=/path/to/export Introduce the existing SR to XenServer: xe sr-introduce...
Concepts, Entities and Terms used for nFactor Authentication through NetScaler
nFactor is the new authentication framework that allows an administrator to configure complex authentication scenarios fairly easily. It reduces complexity through flexible and extensible authentication mechanisms. This framework could be used to configure all the authentication modes currently...
Deploying enterprise MDX enabled apps from App Store via Volume Purchase
The CEM/XenMobile Server is currently optimized for Volume Purchase distribution of Public App Store apps that are not MDX enabled. While it is possible to distribute MDX enabled apps from App Store via volume purchase, some considerations must be taken into account for optimal performance. This...
Setting up a default landing page on Storefront 3.0
The article describes how to set the default landing page in x1 / 3.x on StoreFront 3.x...
"This account is already added. Please select another account to add or press the close button" While Configuring Receiver
This article is intended for Citrix administrators and technical teams only. Non-admin users must contact their company’s Help Desk/IT support team and can refer to CTX297149 for more information. When customer attempts to configure Receiver, he gets an error: This account is already added. Pleas...
How to add a Server Certificate as full chain certificate || XenMobile Server Certificate 10.x
This article shows how a server certificate is made as a full chain certificate...
Storefront 2.6 - users get "Error 500".
users get "Error 500"...
Citrix Store Front 3.0 Unable to save favourites in Store Front
Unable to save favourites in Store Front...
Draft folder emails in Secure Mail not syncing with MS Exchange
Q: Users create drafts in Secure Mail but these do not get synced with MS Exchange and viewable in Outlook. After repeated attempts to amend and save the draft it will be deleted without being synced. Is this a known issue? A: With regard to the Draft folder syncing, there are limitation regardin...
UPM Doesn't Migrate Local User Profiles Since Version 5.4.1
In UPM 5.4.1 and later versions, UPM doesn't migrate local user profiles to UPM store. Then users who are using local profile is unable to retain their personal settings by UPM...
PVS targets experience BSOD: IRQL Not Less or Equal on targets created using XDSW when booting for the first time
PVS Target devices created using Xendesktop Setup Wizard are running in toa blue screen of death issue. The error message displayed on the BSOD screen shows the following message: Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for yo...
How to Configure NetScaler as IDP for SAML Based Integration with 15Five
This article describes how to configure NetScaler as an Identity Service Provider IDP for 15Five SaaS applications, using SAML Security Assertion Markup Language protocol. Introduction 15Five is a company that provides performance management platform that combines employee feedback, objectives...
NetScaler Double Hop Communication Flow with StoreFront
This article explains how the communication flow works when we configure NetScaler in double hop with StoreFront...
Elastic layer not available, "no elastic layer assignments were specified"
After publishing an image with Elastic Layering enabled, when you try to connect to a session host, the layer doesn't show up and you get an error in the Application Log in Windows: "no elastic layer assignments were specified"...
Can't create the PVS connector - error returned at Test Credentials - "Failed to validate the Domain User and Password."
Configuration settings appeared correct but reviewing the unidesk-pvs-connector.log.json displayed the below: HandlerHelper: 'Application Error while processing 'Command' 'CreatePowerShellSessionCommand'': 'DefaultTitle="", MessageID="PowerShellCreateSession",...
After publishing layer to PVS, the VM keeps rebooting with windows error
After publishinglayer to PVS, VM keeps rebooting with windows error below - SYSTEMTHREADEXCEPTIONNOTHANDLED CVhdMp.sys...
OSPF is not advertising SDWAN routes to connected Router
OSPF configured on SDWAN 1K. OSPF is up between the MCN and next hop router. All of the virtual paths are up, but the MCN not advertising SDWAN routes into OSPF...
Changing DNS information on App layering ELM - 4.x
In 4.x, you cannot update DNS information by going to port 5480 MAIPAddress:5480...
Unable to create an SR from a CIFS share containing DFS Targets
Unable to create an SR from a CIFS share containing DFS Targets. When trying to create the SR XenCenter gives an error: Unable to mount the directory specified in device configuration request The following errors can be seen in the logs: daemon.log Apr 6 10:35:04 dubvdodxa65-5 cifs.upcall: unable...
Install XenServer tools silently
To silently install the XenServer Tools and to prevent the system from rebooting...
Assigning a GPU to a Windows VM using xe CLI
To assign a GPU to a Windows VM using xe CLI...
Why does Citrix Receiver send DNS query for nonexistent hostname?
This article is intended for Citrix administrators and technical teams only. Non-admin users must contact their company's Help Desk/IT support team and can refer to CTX297149 for more information. Question: Why does Citrix Receiver send DNS queries to similar NonExistingSubDomain? Answer: Citrix...
How does LDAP Authentication work with Kerberos Impersonation SSO?
How does LDAP Authentication work with Single Sign On using Kerberos Impersonation? In this flow, the NetScaler is contacting the KDC after we purged tickets on the KDC, and the NetScaler. 1. The client makes a GET request to the LB vServer. 2. The LB vServer is configured with Form-based...
Install or upgrade to Citrix Director 7.x using Director .msi file
This article explains the prerequisites and steps to install or upgrade to Citrix Director 7.x using the Director .msi file. Note : Citrix recommends that you use the product installerinstead ofthe .msi file. Requirements Windows Server 2008 R2 or later IIS 7 or later .Net 4.5.1 or later...
Citrix Receiver: Difference of Logon Experience When Logon StoreFront with a Locked Account by Using Username/password and Smart Card
This article is intended for Citrix administrators and technical teams only.Non-admin users must contact their company’s Help Desk/IT support team and can refer toCTX297149for more information This article describes user experience of using Pass-throughwith username and password or smart card log...
Create non-persistent vm on XenServer
You can create a non-persistent XenServer VM by setting the VDI param to on-boot=reset VM will reset to original state after each reboot...
LDAP SSL - invalid user account-LdapErr-DSID-0C090FB4-Error-initializing-SSL
ISSUE: User can not login after changing LDAP authentication to LDAP SSL authentication. Error message: Invalid user account. Symptom: Check the Network Trace and found. For TLS: 22283 2017-03-09 16:54:29.344825357 2.2.2.22.2.2.3LDAP 232 extendedResp1 00000000: LdapErr: DSID-0C090FB4, comment:...
Start Menu Layout Roaming on Windows 10
The Windows 10 Start menu layout is pain point for many users. What’s more, when utilizing roaming profile solutions, the Start menu layout might not be persistent when roaming across multiple desktops. We have described the reasons for this issue in this Citrix blog. The following is a workaroun...
How to configure ADFS Claim Rules and StoreFront with Multiple Domains
How to configure ADFS Claim Rules and StoreFront with multiple domains?...
How to Hide a Store from Being Listed During Discovery with Receiver
This article is intended for Citrix administrators and technical teams only.Non-admin users must contact their company’s Help Desk/IT support team and can refer toCTX297149for more information To stop a Store from being listed during the Discovery process with Receiver change the properties of th...
How to configure PowerShell SDK and execute commands remotely in XenApp/XenDesktop 7.x
To configure PowerShell SDK to execute PowerShell commands remotely in XenApp/XenDesktop 7.x...
How to enable biometric authentication for Android Secure Apps
Unable to utilize biometric authentication for Android Secure Apps...
How to disable Workspace Control Session Roaming on Citrix Virtual Apps and Desktops
This article describes how to disable workspace control session roaming from occurringon Citrix Virtual Appsand Desktops...
How do I open firewall ports for App Layering
...
Change of Expired LDAP Password on NetScaler During Log On Fails Intermittently
Changing the expired LDAP password at the time of user login via NetScaler Gateway due to password-expiry may fail and demonstrate itself on the login page as: "Incorrect credentials. Try again." or "Cannot connect. Try connecting again." ifEnhanced Authentication Feedback is enabled: At the time...
License server 11.14 - Cannot display the webpage
Unable to open Citrix License Administration console in IE brower, you will get below error: "The Page cannot be displayed"...
XenServer- Server are in maintenance mode
XenServer are not able to connect to XenCenter...
Debugging domain join problems in Windows 7
Debugging domain join problems in Windows 7...
An SSL error has occurred and a secure connection to the server cannot be made.
“An SSL error has occurred and a secure connection to the server cannot be made.” This error was seen when browsing to HTTPS sites with Secure Web over a Full VPN tunnel. HTTP sites loaded correctly...
The remote server returned an error: (500) Internal Server Error
If you see "The remote server returned an error: 500 Internal Server Error" in any of the Unidesk failure messages, it means there is a problem with an ESX host. Keep in mind that vSphere will route filesystem requests to any available ESX host that has the requested VMFS mounted, including ones...
Windows 10 is supported in vSphere 5.5 Update 3b and vSphere 6.0 and above for Unidesk environments
Windows 10 is supported in vSphere 5.5 Update 3band vSphere 6.0 and above for Unidesk environments...
How to Remove and Replace a NetScaler in High Availability (HA) Pair Setup
This article helps you address RMA replacements and includes instruction on how to backup configurations, upgrade or downgrade shipped software version, and setup of RPC password on NetScaler. Before you Begin Label all interfaces/cables prior to swap Requirements A Windows client or server with...
Visio or Project license issue when deploying in layers separate from Office 2010
Visio or Project license issue when deploying in layers separate from Office 2010...
Managing Printer Deployment Using Layers in the Unidesk Environment
While many brokering and persona management solutions provide mechanisms to manage printer deployment, you might find it easier to use Unidesk layers. Unidesk layers provide a flexible mechanism for managing printer deployments for different groups of users. When you use Unidesk layers to deploy...
AppSense Environment Manager not personalizing apps
The AppSense Environment Manager can be used to personalize Unidesk Desktop features e.g. wallpaper across Desktops, but personalizing applications and fine-grained application management e.g. disabling printing from IE is not currently working out of the box. This is because AppSense only manage...
The Network Connections folder in Windows is empty
The "Network Connections" folder in Windows is empty...
How to remove "Ghost" NIC devices from Windows
Unidesk 2.X releases before 2.8.3:After Desktops have been backed up and restored to a new CachePoint, the NIC doesn't come up. Even after restarting to apply changes and rediscovering the disks, the driver does not appear to install correctly. This can also happen during layer changes on a...