{"nessus": [{"lastseen": "2022-02-28T13:15:33", "description": "According to the versions of the kvm package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer.(CVE-2018-12126)\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.i1/4^CVE-2018-12130i1/4%0\n\n - Microprocessors use a aEUR~load portaEURtm subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUaEURtms pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel.(CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.(CVE-2019-11091)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-30T00:00:00", "type": "nessus", "title": "EulerOS Virtualization 3.0.1.0 : kvm (EulerOS-SA-2019-1611)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-06T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:kvm", "cpe:/o:huawei:euleros:uvp:3.0.1.0"], "id": "EULEROS_SA-2019-1611.NASL", "href": "https://www.tenable.com/plugins/nessus/125563", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125563);\n script_version(\"1.7\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n\n script_name(english:\"EulerOS Virtualization 3.0.1.0 : kvm (EulerOS-SA-2019-1611)\");\n script_summary(english:\"Checks the rpm output for the updated packages.\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS Virtualization host is missing multiple security\nupdates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the kvm package installed, the EulerOS\nVirtualization installation on the remote host is affected by the\nfollowing vulnerabilities :\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the\n processor to hand-off address generation logic into\n these sub-operations for optimized writes. Both of\n these sub-operations write to a shared distributed\n processor structure called the 'processor store\n buffer'. As a result, an unprivileged attacker could\n use this flaw to read private data resident within the\n CPU's processor store buffer.(CVE-2018-12126)\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time\n can be measured to infer data in the fill\n buffer.i1/4^CVE-2018-12130i1/4%0\n\n - Microprocessors use a aEUR~load portaEURtm subcomponent to\n perform load operations from memory or IO. During a\n load operation, the load port receives data from the\n memory or IO subsystem and then provides the data to\n the CPU registers and operations in the CPUaEURtms\n pipelines. Stale load operations results are stored in\n the 'load port' table until overwritten by newer\n operations. Certain load-port operations triggered by\n an attacker can be used to reveal data about previous\n stale requests leaking data back to the attacker via a\n timing side-channel.(CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user\n to potentially enable information disclosure via a side\n channel with local access.(CVE-2019-11091)\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the EulerOS security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-1611\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?80f311bb\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected kvm packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/31\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/30\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:uvp:3.0.1.0\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nuvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (uvp != \"3.0.1.0\") audit(AUDIT_OS_NOT, \"EulerOS Virtualization 3.0.1.0\");\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_ARCH_NOT, \"i686 / x86_64\", cpu);\n\nflag = 0;\n\npkgs = [\"kvm-4.4.11-30.014\"];\n\nforeach (pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kvm\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:24:18", "description": "Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer.(CVE-2018-12126)\n\nUncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.(CVE-2019-11091)\n\nMicroprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel.(CVE-2018-12127)\n\nA flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.(CVE-2018-12130)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-08-13T00:00:00", "type": "nessus", "title": "Amazon Linux AMI : qemu-kvm (ALAS-2019-1260) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": ["p-cpe:/a:amazon:linux:qemu-img", "p-cpe:/a:amazon:linux:qemu-kvm", "p-cpe:/a:amazon:linux:qemu-kvm-common", "p-cpe:/a:amazon:linux:qemu-kvm-debuginfo", "p-cpe:/a:amazon:linux:qemu-kvm-tools", "cpe:/o:amazon:linux"], "id": "ALA_ALAS-2019-1260.NASL", "href": "https://www.tenable.com/plugins/nessus/127816", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Amazon Linux AMI Security Advisory ALAS-2019-1260.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(127816);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"ALAS\", value:\"2019-1260\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"Amazon Linux AMI : qemu-kvm (ALAS-2019-1260) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\",\n value:\"The remote Amazon Linux AMI host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\",\n value:\n\"Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer.(CVE-2018-12126)\n\nUncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local\naccess.(CVE-2019-11091)\n\nMicroprocessors use a load port subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPUs pipelines. Stale\nload operations results are stored in the 'load port' table until\noverwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel.(CVE-2018-12127)\n\nA flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer.(CVE-2018-12130)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://alas.aws.amazon.com/ALAS-2019-1260.html\"\n );\n script_set_attribute(\n attribute:\"solution\",\n value:\"Run 'yum update qemu-kvm' to update your system.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:amazon:linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/08/07\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/13\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Amazon Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AmazonLinux/release\", \"Host/AmazonLinux/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/AmazonLinux/release\");\nif (isnull(release) || !strlen(release)) audit(AUDIT_OS_NOT, \"Amazon Linux\");\nos_ver = pregmatch(pattern: \"^AL(A|\\d)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Amazon Linux\");\nos_ver = os_ver[1];\nif (os_ver != \"A\")\n{\n if (os_ver == 'A') os_ver = 'AMI';\n audit(AUDIT_OS_NOT, \"Amazon Linux AMI\", \"Amazon Linux \" + os_ver);\n}\n\nif (!get_kb_item(\"Host/AmazonLinux/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\nflag = 0;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-156.16.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-156.16.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-156.16.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-156.16.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-156.16.amzn1\")) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:53", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "CentOS 6 : qemu-kvm (CESA-2019:1181) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:centos:centos:qemu-guest-agent", "p-cpe:/a:centos:centos:qemu-img", "p-cpe:/a:centos:centos:qemu-kvm", "p-cpe:/a:centos:centos:qemu-kvm-tools", "cpe:/o:centos:centos:6"], "id": "CENTOS_RHSA-2019-1181.NASL", "href": "https://www.tenable.com/plugins/nessus/125172", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1181 and \n# CentOS Errata and Security Advisory 2019:1181 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125172);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1181\");\n\n script_name(english:\"CentOS 6 : qemu-kvm (CESA-2019:1181) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote CentOS host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n # https://lists.centos.org/pipermail/centos-announce/2019-May/023307.html\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?d5ca3081\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected qemu-kvm packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:centos:centos:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"CentOS Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/CentOS/release\", \"Host/CentOS/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/CentOS/release\");\nif (isnull(release) || \"CentOS\" >!< release) audit(AUDIT_OS_NOT, \"CentOS\");\nos_ver = pregmatch(pattern: \"CentOS(?: Linux)? release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"CentOS\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"CentOS 6.x\", \"CentOS \" + os_ver);\n\nif (!get_kb_item(\"Host/CentOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"CentOS\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"CentOS-6\", reference:\"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"CentOS-6\", cpu:\"x86_64\", reference:\"qemu-img-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"CentOS-6\", cpu:\"x86_64\", reference:\"qemu-kvm-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"CentOS-6\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-0.12.1.2-2.506.el6_10.3\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-guest-agent / qemu-img / qemu-kvm / qemu-kvm-tools\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:46", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "CentOS 7 : qemu-kvm (CESA-2019:1178) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:centos:centos:qemu-img", "p-cpe:/a:centos:centos:qemu-kvm", "p-cpe:/a:centos:centos:qemu-kvm-common", "p-cpe:/a:centos:centos:qemu-kvm-tools", "cpe:/o:centos:centos:7"], "id": "CENTOS_RHSA-2019-1178.NASL", "href": "https://www.tenable.com/plugins/nessus/125170", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1178 and \n# CentOS Errata and Security Advisory 2019:1178 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125170);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1178\");\n\n script_name(english:\"CentOS 7 : qemu-kvm (CESA-2019:1178) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote CentOS host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n # https://lists.centos.org/pipermail/centos-announce/2019-May/023312.html\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?8e9f799c\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected qemu-kvm packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:centos:centos:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"CentOS Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/CentOS/release\", \"Host/CentOS/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/CentOS/release\");\nif (isnull(release) || \"CentOS\" >!< release) audit(AUDIT_OS_NOT, \"CentOS\");\nos_ver = pregmatch(pattern: \"CentOS(?: Linux)? release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"CentOS\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"CentOS 7.x\", \"CentOS \" + os_ver);\n\nif (!get_kb_item(\"Host/CentOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"CentOS\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-160.el7_6.2\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-tools\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:13", "description": "According to the versions of the parallels-server-bm-release / vzkernel / etc packages installed, the Virtuozzo installation on the remote host is affected by the following vulnerabilities :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer.\n\n - Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel.\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n\nNote that Tenable Network Security has extracted the preceding description block directly from the Virtuozzo security advisory.\nTenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "nessus", "title": "Virtuozzo 6 : parallels-server-bm-release / vzkernel / etc (VZA-2019-037)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-04T00:00:00", "cpe": ["p-cpe:/a:virtuozzo:virtuozzo:parallels-server-bm-release", "p-cpe:/a:virtuozzo:virtuozzo:vzkernel", "p-cpe:/a:virtuozzo:virtuozzo:vzkernel-devel", "p-cpe:/a:virtuozzo:virtuozzo:vzkernel-firmware", "p-cpe:/a:virtuozzo:virtuozzo:vzmodules", "p-cpe:/a:virtuozzo:virtuozzo:vzmodules-devel", "cpe:/o:virtuozzo:virtuozzo:6"], "id": "VIRTUOZZO_VZA-2019-037.NASL", "href": "https://www.tenable.com/plugins/nessus/125254", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125254);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/04\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n\n script_name(english:\"Virtuozzo 6 : parallels-server-bm-release / vzkernel / etc (VZA-2019-037)\");\n script_summary(english:\"Checks the rpm output for the updated packages.\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Virtuozzo host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the parallels-server-bm-release /\nvzkernel / etc packages installed, the Virtuozzo installation on the\nremote host is affected by the following vulnerabilities :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time\n can be measured to infer data in the fill buffer.\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the\n processor to hand-off address generation logic into\n these sub-operations for optimized writes. Both of\n these sub-operations write to a shared distributed\n processor structure called the 'processor store\n buffer'. As a result, an unprivileged attacker could\n use this flaw to read private data resident within the\n CPU's processor store buffer.\n\n - Microprocessors use a 'load port' subcomponent to\n perform load operations from memory or IO. During a\n load operation, the load port receives data from the\n memory or IO subsystem and then provides the data to\n the CPU registers and operations in the CPU's\n pipelines. Stale load operations results are stored in\n the 'load port' table until overwritten by newer\n operations. Certain load-port operations triggered by\n an attacker can be used to reveal data about previous\n stale requests leaking data back to the attacker via a\n timing side-channel.\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user\n to potentially enable information disclosure via a side\n channel with local access.\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the Virtuozzo security advisory.\nTenable has attempted to automatically clean and format it as much as\npossible without introducing additional issues.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://virtuozzosupport.force.com/s/article/VZA-2019-037\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/errata/RHSA-2019:1169\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/security/vulnerabilities/mds\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected parallels-server-bm-release / vzkernel / etc packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/17\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:virtuozzo:virtuozzo:parallels-server-bm-release\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:virtuozzo:virtuozzo:vzkernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:virtuozzo:virtuozzo:vzkernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:virtuozzo:virtuozzo:vzkernel-firmware\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:virtuozzo:virtuozzo:vzmodules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:virtuozzo:virtuozzo:vzmodules-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:virtuozzo:virtuozzo:6\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Virtuozzo Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Virtuozzo/release\", \"Host/Virtuozzo/rpm-list\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/Virtuozzo/release\");\nif (isnull(release) || \"Virtuozzo\" >!< release) audit(AUDIT_OS_NOT, \"Virtuozzo\");\nos_ver = pregmatch(pattern: \"Virtuozzo Linux release ([0-9]+\\.[0-9])(\\D|$)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Virtuozzo\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Virtuozzo 6.x\", \"Virtuozzo \" + os_ver);\n\nif (!get_kb_item(\"Host/Virtuozzo/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Virtuozzo\", cpu);\n\nflag = 0;\n\npkgs = [\"parallels-server-bm-release-6.0.12-3739\",\n \"vzkernel-2.6.32-042stab138.1\",\n \"vzkernel-devel-2.6.32-042stab138.1\",\n \"vzkernel-firmware-2.6.32-042stab138.1\",\n \"vzmodules-2.6.32-042stab138.1\",\n \"vzmodules-devel-2.6.32-042stab138.1\"];\n\nforeach (pkg in pkgs)\n if (rpm_check(release:\"Virtuozzo-6\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"parallels-server-bm-release / vzkernel / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:17:06", "description": "An update for libvirt is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a aEUR~load portaEURtm subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUaEURtms pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nNote that Tenable Network Security has attempted to extract the preceding description block directly from the corresponding Red Hat security advisory. Virtuozzo provides no description for VZLSA advisories. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-06-05T00:00:00", "type": "nessus", "title": "Virtuozzo 6 : libvirt / libvirt-client / libvirt-devel / etc (VZLSA-2019-1180)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:virtuozzo:virtuozzo:libvirt", "p-cpe:/a:virtuozzo:virtuozzo:libvirt-client", "p-cpe:/a:virtuozzo:virtuozzo:libvirt-devel", "p-cpe:/a:virtuozzo:virtuozzo:libvirt-lock-sanlock", "p-cpe:/a:virtuozzo:virtuozzo:libvirt-python", "cpe:/o:virtuozzo:virtuozzo:6"], "id": "VIRTUOZZO_VZLSA-2019-1180.NASL", "href": "https://www.tenable.com/plugins/nessus/125727", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125727);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"Virtuozzo 6 : libvirt / libvirt-client / libvirt-devel / etc (VZLSA-2019-1180)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Virtuozzo host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"An update for libvirt is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a aEUR~load portaEURtm subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPUaEURtms pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\n\nNote that Tenable Network Security has attempted to extract the\npreceding description block directly from the corresponding Red Hat\nsecurity advisory. Virtuozzo provides no description for VZLSA\nadvisories. Tenable has attempted to automatically clean and format\nit as much as possible without introducing additional issues.\");\n # http://repo.virtuozzo.com/vzlinux/announcements/json/VZLSA-2019-1180.json\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?2a811a71\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/errata/RHSA-2019:1180\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected libvirt / libvirt-client / libvirt-devel / etc package.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/06/05\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:virtuozzo:virtuozzo:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:virtuozzo:virtuozzo:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:virtuozzo:virtuozzo:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:virtuozzo:virtuozzo:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:virtuozzo:virtuozzo:libvirt-python\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:virtuozzo:virtuozzo:6\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Virtuozzo Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Virtuozzo/release\", \"Host/Virtuozzo/rpm-list\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/Virtuozzo/release\");\nif (isnull(release) || \"Virtuozzo\" >!< release) audit(AUDIT_OS_NOT, \"Virtuozzo\");\nos_ver = pregmatch(pattern: \"Virtuozzo Linux release ([0-9]+\\.[0-9])(\\D|$)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Virtuozzo\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Virtuozzo 6.x\", \"Virtuozzo \" + os_ver);\n\nif (!get_kb_item(\"Host/Virtuozzo/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Virtuozzo\", cpu);\n\nflag = 0;\n\npkgs = [\"libvirt-0.10.2-64.vl6.1\",\n \"libvirt-client-0.10.2-64.vl6.1\",\n \"libvirt-devel-0.10.2-64.vl6.1\",\n \"libvirt-lock-sanlock-0.10.2-64.vl6.1\",\n \"libvirt-python-0.10.2-64.vl6.1\"];\n\nforeach (pkg in pkgs)\n if (rpm_check(release:\"Virtuozzo-6\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-client / libvirt-devel / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:45", "description": "- Microarchitectural Store Buffer Data Sampling (MSBDS) (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS) (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS) (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM) (CVE-2019-11091)\n\nMSBDS leaks Store Buffer Entries which can be speculatively forwarded to a dependent load (store-to-load forwarding) as an optimization. The forward can also happen to a faulting or assisting load operation for a different memory address, which can cause an issue under certain conditions. Store buffers are partitioned between Hyper-Threads so cross thread forwarding is not possible. But if a thread enters or exits a sleep state the store buffer is repartitioned which can expose data from one thread to the other.\n\nMFBDS leaks Fill Buffer Entries. Fill buffers are used internally to manage L1 miss situations and to hold data which is returned or sent in response to a memory or I/O operation. Fill buffers can forward data to a load operation and also write data to the cache. When the fill buffer is deallocated it can retain the stale data of the preceding operations which can then be forwarded to a faulting or assisting load operation, which can be cause an issue under certain conditions. Fill buffers are shared between Hyper-Threads so cross thread leakage is possible.\n\nMLDPS leaks Load Port Data. Load ports are used to perform load operations from memory or I/O. The received data is then forwarded to the register file or a subsequent operation. In some implementations the Load Port can contain stale data from a previous operation which can be forwarded to faulting or assisting loads under certain conditions, which again can be cause an issue eventually. Load ports are shared between Hyper-Threads so cross thread leakage is possible.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Amazon Linux 2 : kernel (ALAS-2019-1205) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:amazon:linux:kernel", "p-cpe:/a:amazon:linux:kernel-debuginfo", "p-cpe:/a:amazon:linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:amazon:linux:kernel-devel", "p-cpe:/a:amazon:linux:kernel-headers", "p-cpe:/a:amazon:linux:kernel-tools", "p-cpe:/a:amazon:linux:kernel-tools-debuginfo", "p-cpe:/a:amazon:linux:kernel-tools-devel", "p-cpe:/a:amazon:linux:perf", "p-cpe:/a:amazon:linux:perf-debuginfo", "p-cpe:/a:amazon:linux:python-perf", "p-cpe:/a:amazon:linux:python-perf-debuginfo", "cpe:/o:amazon:linux:2"], "id": "AL2_ALAS-2019-1205.NASL", "href": "https://www.tenable.com/plugins/nessus/125091", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Amazon Linux 2 Security Advisory ALAS-2019-1205.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125091);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"ALAS\", value:\"2019-1205\");\n\n script_name(english:\"Amazon Linux 2 : kernel (ALAS-2019-1205) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Amazon Linux 2 host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\" - Microarchitectural Store Buffer Data Sampling (MSBDS)\n (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS)\n (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS)\n (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM) (CVE-2019-11091)\n\nMSBDS leaks Store Buffer Entries which can be speculatively forwarded\nto a dependent load (store-to-load forwarding) as an optimization. The\nforward can also happen to a faulting or assisting load operation for\na different memory address, which can cause an issue under certain\nconditions. Store buffers are partitioned between Hyper-Threads so\ncross thread forwarding is not possible. But if a thread enters or\nexits a sleep state the store buffer is repartitioned which can expose\ndata from one thread to the other.\n\nMFBDS leaks Fill Buffer Entries. Fill buffers are used internally to\nmanage L1 miss situations and to hold data which is returned or sent\nin response to a memory or I/O operation. Fill buffers can forward\ndata to a load operation and also write data to the cache. When the\nfill buffer is deallocated it can retain the stale data of the\npreceding operations which can then be forwarded to a faulting or\nassisting load operation, which can be cause an issue under certain\nconditions. Fill buffers are shared between Hyper-Threads so cross\nthread leakage is possible.\n\nMLDPS leaks Load Port Data. Load ports are used to perform load\noperations from memory or I/O. The received data is then forwarded to\nthe register file or a subsequent operation. In some implementations\nthe Load Port can contain stale data from a previous operation which\ncan be forwarded to faulting or assisting loads under certain\nconditions, which again can be cause an issue eventually. Load ports\nare shared between Hyper-Threads so cross thread leakage is possible.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://alas.aws.amazon.com/AL2/ALAS-2019-1205.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\n\"Run 'yum update kernel' and reboot your instance to update your\nsystem.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-tools-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:amazon:linux:2\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Amazon Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AmazonLinux/release\", \"Host/AmazonLinux/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/AmazonLinux/release\");\nif (isnull(release) || !strlen(release)) audit(AUDIT_OS_NOT, \"Amazon Linux\");\nos_ver = pregmatch(pattern: \"^AL(A|\\d)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Amazon Linux\");\nos_ver = os_ver[1];\nif (os_ver != \"2\")\n{\n if (os_ver == 'A') os_ver = 'AMI';\n audit(AUDIT_OS_NOT, \"Amazon Linux 2\", \"Amazon Linux \" + os_ver);\n}\n\nif (!get_kb_item(\"Host/AmazonLinux/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\nflag = 0;\nif (rpm_check(release:\"AL2\", cpu:\"x86_64\", reference:\"kernel-4.14.114-105.126.amzn2\")) flag++;\nif (rpm_check(release:\"AL2\", cpu:\"x86_64\", reference:\"kernel-debuginfo-4.14.114-105.126.amzn2\")) flag++;\nif (rpm_check(release:\"AL2\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-4.14.114-105.126.amzn2\")) flag++;\nif (rpm_check(release:\"AL2\", cpu:\"x86_64\", reference:\"kernel-devel-4.14.114-105.126.amzn2\")) flag++;\nif (rpm_check(release:\"AL2\", reference:\"kernel-headers-4.14.114-105.126.amzn2\")) flag++;\nif (rpm_check(release:\"AL2\", cpu:\"x86_64\", reference:\"kernel-tools-4.14.114-105.126.amzn2\")) flag++;\nif (rpm_check(release:\"AL2\", cpu:\"x86_64\", reference:\"kernel-tools-debuginfo-4.14.114-105.126.amzn2\")) flag++;\nif (rpm_check(release:\"AL2\", cpu:\"x86_64\", reference:\"kernel-tools-devel-4.14.114-105.126.amzn2\")) flag++;\nif (rpm_check(release:\"AL2\", cpu:\"x86_64\", reference:\"perf-4.14.114-105.126.amzn2\")) flag++;\nif (rpm_check(release:\"AL2\", cpu:\"x86_64\", reference:\"perf-debuginfo-4.14.114-105.126.amzn2\")) flag++;\nif (rpm_check(release:\"AL2\", cpu:\"x86_64\", reference:\"python-perf-4.14.114-105.126.amzn2\")) flag++;\nif (rpm_check(release:\"AL2\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-4.14.114-105.126.amzn2\")) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-debuginfo / kernel-debuginfo-common-x86_64 / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:19:50", "description": "This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software mitigations.\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes :\n\n---- updated platforms ------------------------------------ SNB-E/EN/EP C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X SNB-E/EN/EP C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\n---- new platforms ---------------------------------------- VLV C0 6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron N2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0 6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X series Readded what missing in last update: BDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core i7-69xx/68xx\n\nThis update was imported from the SUSE:SLE-15-SP1:Update update project.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-07-25T00:00:00", "type": "nessus", "title": "openSUSE Security Update : ucode-intel (openSUSE-2019-1806) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": ["p-cpe:/a:novell:opensuse:ucode-intel", "cpe:/o:novell:opensuse:15.1"], "id": "OPENSUSE-2019-1806.NASL", "href": "https://www.tenable.com/plugins/nessus/127037", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from openSUSE Security Update openSUSE-2019-1806.\n#\n# The text description of this plugin is (C) SUSE LLC.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127037);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"openSUSE Security Update : ucode-intel (openSUSE-2019-1806) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote openSUSE host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release\n(bsc#1111331)\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data\n Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data\n Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data\n Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling\n Uncacheable Memory (MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software\nmitigations.\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes :\n\n---- updated platforms ------------------------------------\nSNB-E/EN/EP C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X\nSNB-E/EN/EP C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\n---- new platforms ---------------------------------------- VLV C0\n6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron\nN2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0\n6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X\nseries Readded what missing in last update: BDX-ML B0/M0/R0 6-4f-1/ef\n0b00002e->00000036 Xeon E5/E7 v4; Core i7-69xx/68xx\n\nThis update was imported from the SUSE:SLE-15-SP1:Update update\nproject.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111331\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/support/kb/doc/?id=7023736\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected ucode-intel package.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/24\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/07/25\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:opensuse:15.1\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release =~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"openSUSE\");\nif (release !~ \"^(SUSE15\\.1)$\") audit(AUDIT_OS_RELEASE_NOT, \"openSUSE\", \"15.1\", release);\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nourarch = get_kb_item(\"Host/cpu\");\nif (!ourarch) audit(AUDIT_UNKNOWN_ARCH);\nif (ourarch !~ \"^(x86_64)$\") audit(AUDIT_ARCH_NOT, \"x86_64\", ourarch);\n\nflag = 0;\n\nif ( rpm_check(release:\"SUSE15.1\", reference:\"ucode-intel-20190618-lp151.2.3.1\") ) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:20:35", "description": "This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software mitigations.\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes :\n\n---- updated platforms ------------------------------------ SNB-E/EN/EP C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X SNB-E/EN/EP C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\nThis update was imported from the SUSE:SLE-15:Update update project.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-07-25T00:00:00", "type": "nessus", "title": "openSUSE Security Update : ucode-intel (openSUSE-2019-1805) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": ["p-cpe:/a:novell:opensuse:ucode-intel", "cpe:/o:novell:opensuse:15.0"], "id": "OPENSUSE-2019-1805.NASL", "href": "https://www.tenable.com/plugins/nessus/127036", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from openSUSE Security Update openSUSE-2019-1805.\n#\n# The text description of this plugin is (C) SUSE LLC.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127036);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"openSUSE Security Update : ucode-intel (openSUSE-2019-1805) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote openSUSE host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release\n(bsc#1111331)\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data\n Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data\n Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data\n Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling\n Uncacheable Memory (MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software\nmitigations.\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes :\n\n---- updated platforms ------------------------------------\nSNB-E/EN/EP C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X\nSNB-E/EN/EP C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\nThis update was imported from the SUSE:SLE-15:Update update project.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111331\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/support/kb/doc/?id=7023736\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected ucode-intel package.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/24\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/07/25\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:opensuse:15.0\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release =~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"openSUSE\");\nif (release !~ \"^(SUSE15\\.0)$\") audit(AUDIT_OS_RELEASE_NOT, \"openSUSE\", \"15.0\", release);\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nourarch = get_kb_item(\"Host/cpu\");\nif (!ourarch) audit(AUDIT_UNKNOWN_ARCH);\nif (ourarch !~ \"^(x86_64)$\") audit(AUDIT_ARCH_NOT, \"x86_64\", ourarch);\n\nflag = 0;\n\nif ( rpm_check(release:\"SUSE15.0\", reference:\"ucode-intel-20190618-lp150.2.24.1\") ) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:33", "description": "This update for ucode-intel fixes the following issues :\n\nThe Intel CPU Microcode was updated to the official QSR 2019.1 Microcode release (bsc#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127 CVE-2019-11091)\n\n---- new platforms ---------------------------------------- VLV C0 6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron N2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0 6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X series\n\nReadded missing in last update :\n\nBDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core i7-69xx/68xx\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-23T00:00:00", "type": "nessus", "title": "SUSE SLED15 / SLES15 Security Update : ucode-intel (SUSE-SU-2019:1313-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:ucode-intel", "cpe:/o:novell:suse_linux:15"], "id": "SUSE_SU-2019-1313-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125351", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1313-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125351);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"SUSE SLED15 / SLES15 Security Update : ucode-intel (SUSE-SU-2019:1313-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated package.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote SUSE host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"This update for ucode-intel fixes the following issues :\n\nThe Intel CPU Microcode was updated to the official QSR 2019.1\nMicrocode release (bsc#1111331 CVE-2018-12126 CVE-2018-12130\nCVE-2018-12127 CVE-2019-11091)\n\n---- new platforms ---------------------------------------- VLV C0\n6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron\nN2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0\n6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X\nseries\n\nReadded missing in last update :\n\nBDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core\ni7-69xx/68xx\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12126/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12127/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12130/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2019-11091/\"\n );\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191313-1/\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?4d310267\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE Linux Enterprise Module for Basesystem 15:zypper in -t patch\nSUSE-SLE-Module-Basesystem-15-2019-1313=1\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:15\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/22\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/23\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED15|SLES15)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED15 / SLES15\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\nif (cpu >!< \"x86_64\") audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES15\" && (! preg(pattern:\"^(0)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES15 SP0\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED15\" && (! preg(pattern:\"^(0)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED15 SP0\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-3.19.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-3.19.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "This update for ucode-intel fixes the following issues :\n\nucode-intel was updated to official QSR 2019.1 microcode release (bsc#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127 CVE-2019-11091)\n\n---- new platforms ---------------------------------------- VLV C0 6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron N2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0 6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X series\n\nReadded Broadwell CPU ucode that was missing in last update :\n\nBDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core i7-69xx/68xx\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-22T00:00:00", "type": "nessus", "title": "SUSE SLED12 / SLES12 Security Update : ucode-intel (SUSE-SU-2019:1296-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-13T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:ucode-intel", "p-cpe:/a:novell:suse_linux:ucode-intel-debuginfo", "p-cpe:/a:novell:suse_linux:ucode-intel-debugsource", "cpe:/o:novell:suse_linux:12"], "id": "SUSE_SU-2019-1296-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125333", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1296-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125333);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/13\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"SUSE SLED12 / SLES12 Security Update : ucode-intel (SUSE-SU-2019:1296-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\",\n value:\"The remote SUSE host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\",\n value:\n\"This update for ucode-intel fixes the following issues :\n\nucode-intel was updated to official QSR 2019.1 microcode release\n(bsc#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127\nCVE-2019-11091)\n\n---- new platforms ---------------------------------------- VLV C0\n6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron\nN2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0\n6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X\nseries\n\nReadded Broadwell CPU ucode that was missing in last update :\n\nBDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core\ni7-69xx/68xx\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12126/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12127/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12130/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2019-11091/\"\n );\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191296-1/\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?8799a77e\"\n );\n script_set_attribute(\n attribute:\"solution\",\n value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE OpenStack Cloud 7:zypper in -t patch\nSUSE-OpenStack-Cloud-7-2019-1296=1\n\nSUSE Linux Enterprise Server for SAP 12-SP2:zypper in -t patch\nSUSE-SLE-SAP-12-SP2-2019-1296=1\n\nSUSE Linux Enterprise Server for SAP 12-SP1:zypper in -t patch\nSUSE-SLE-SAP-12-SP1-2019-1296=1\n\nSUSE Linux Enterprise Server 12-SP4:zypper in -t patch\nSUSE-SLE-SERVER-12-SP4-2019-1296=1\n\nSUSE Linux Enterprise Server 12-SP3:zypper in -t patch\nSUSE-SLE-SERVER-12-SP3-2019-1296=1\n\nSUSE Linux Enterprise Server 12-SP2-LTSS:zypper in -t patch\nSUSE-SLE-SERVER-12-SP2-2019-1296=1\n\nSUSE Linux Enterprise Server 12-SP2-BCL:zypper in -t patch\nSUSE-SLE-SERVER-12-SP2-BCL-2019-1296=1\n\nSUSE Linux Enterprise Server 12-SP1-LTSS:zypper in -t patch\nSUSE-SLE-SERVER-12-SP1-2019-1296=1\n\nSUSE Linux Enterprise Server 12-LTSS:zypper in -t patch\nSUSE-SLE-SERVER-12-2019-1296=1\n\nSUSE Linux Enterprise Desktop 12-SP4:zypper in -t patch\nSUSE-SLE-DESKTOP-12-SP4-2019-1296=1\n\nSUSE Linux Enterprise Desktop 12-SP3:zypper in -t patch\nSUSE-SLE-DESKTOP-12-SP3-2019-1296=1\n\nSUSE Enterprise Storage 4:zypper in -t patch\nSUSE-Storage-4-2019-1296=1\n\nSUSE CaaS Platform 3.0 :\n\nTo install this update, use the SUSE CaaS Platform Velum dashboard. It\nwill inform you if it detects new updates and let you then trigger\nupdating of the complete cluster in a controlled way.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:12\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/20\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/22\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED12|SLES12)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED12 / SLES12\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\nif (cpu >!< \"x86_64\") audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES12\" && (! preg(pattern:\"^(0|1|2|3|4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES12 SP0/1/2/3/4\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED12\" && (! preg(pattern:\"^(3|4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED12 SP3/4\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"2\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"2\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"2\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:16", "description": "This update for xen fixes the following issues :\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the XEN Hypervisor adjustments, that additionally also use CPU Microcode updates.\n\nThe mitigation can be controlled via the 'mds' commandline option, see the documentation.\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nOther fixes: Added code to change LIBXL_HOTPLUG_TIMEOUT at runtime.\n\nThe included README has details about the impact of this change (bsc#1120095) Fixes in Live migrating PV domUs\n\nAn earlier change broke live migration of PV domUs without a device model. The migration would stall for 10 seconds while the domU was paused, which caused network connections to drop. Fix this by tracking the need for a device model within libxl. (bsc#1079730, bsc#1098403, bsc#1111025) Libvirt segfault when crash triggered on top of HVM guest (bsc#1120067)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "SUSE SLED15 / SLES15 Security Update : xen (SUSE-SU-2019:1248-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-13T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:xen", "p-cpe:/a:novell:suse_linux:xen-debugsource", "p-cpe:/a:novell:suse_linux:xen-devel", "p-cpe:/a:novell:suse_linux:xen-libs", "p-cpe:/a:novell:suse_linux:xen-libs-debuginfo", "p-cpe:/a:novell:suse_linux:xen-tools", "p-cpe:/a:novell:suse_linux:xen-tools-debuginfo", "p-cpe:/a:novell:suse_linux:xen-tools-domU", "p-cpe:/a:novell:suse_linux:xen-tools-domU-debuginfo", "cpe:/o:novell:suse_linux:15"], "id": "SUSE_SU-2019-1248-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125133", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1248-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125133);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/13\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"SUSE SLED15 / SLES15 Security Update : xen (SUSE-SU-2019:1248-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\",\n value:\"The remote SUSE host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\",\n value:\n\"This update for xen fixes the following issues :\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n(MDSUM)\n\nThese updates contain the XEN Hypervisor adjustments, that\nadditionally also use CPU Microcode updates.\n\nThe mitigation can be controlled via the 'mds' commandline option, see\nthe documentation.\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nOther fixes: Added code to change LIBXL_HOTPLUG_TIMEOUT at runtime.\n\nThe included README has details about the impact of this change\n(bsc#1120095) Fixes in Live migrating PV domUs\n\nAn earlier change broke live migration of PV domUs without a\ndevice model. The migration would stall for 10 seconds while\nthe domU was paused, which caused network connections to\ndrop. Fix this by tracking the need for a device model\nwithin libxl. (bsc#1079730, bsc#1098403, bsc#1111025)\nLibvirt segfault when crash triggered on top of HVM guest\n(bsc#1120067)\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1027519\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1079730\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1098403\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111025\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1120067\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1120095\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12126/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12127/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12130/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2019-11091/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/support/kb/doc/?id=7023736\"\n );\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191248-1/\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?646635ed\"\n );\n script_set_attribute(\n attribute:\"solution\",\n value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE Linux Enterprise Module for Server Applications 15:zypper in -t\npatch SUSE-SLE-Module-Server-Applications-15-2019-1248=1\n\nSUSE Linux Enterprise Module for Basesystem 15:zypper in -t patch\nSUSE-SLE-Module-Basesystem-15-2019-1248=1\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:xen-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:xen-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:xen-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:xen-libs-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:xen-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:xen-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:xen-tools-domU\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:xen-tools-domU-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:15\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED15|SLES15)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED15 / SLES15\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\nif (cpu >!< \"x86_64\") audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES15\" && (! preg(pattern:\"^(0)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES15 SP0\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED15\" && (! preg(pattern:\"^(0)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED15 SP0\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-debugsource-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-devel-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-libs-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-libs-debuginfo-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-tools-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-tools-debuginfo-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-tools-domU-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-tools-domU-debuginfo-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-debugsource-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-libs-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-libs-debuginfo-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-tools-domU-4.10.3_04-3.19.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", cpu:\"x86_64\", reference:\"xen-tools-domU-debuginfo-4.10.3_04-3.19.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"xen\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:24:55", "description": "The remote NewStart CGSL host, running version MAIN 4.05, has libvirt packages installed that are affected by multiple vulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub- operations. These sub-operations allow the processor to hand-off address generation logic into these sub- operations for optimized writes. Both of these sub- operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill buffer, a mechanism used by modern CPUs when a cache- miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side- channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-08-12T00:00:00", "type": "nessus", "title": "NewStart CGSL MAIN 4.05 : libvirt Multiple Vulnerabilities (NS-SA-2019-0152)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": [], "id": "NEWSTART_CGSL_NS-SA-2019-0152_LIBVIRT.NASL", "href": "https://www.tenable.com/plugins/nessus/127426", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\n# The descriptive text and package checks in this plugin were\n# extracted from ZTE advisory NS-SA-2019-0152. The text\n# itself is copyright (C) ZTE, Inc.\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127426);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"NewStart CGSL MAIN 4.05 : libvirt Multiple Vulnerabilities (NS-SA-2019-0152)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote machine is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote NewStart CGSL host, running version MAIN 4.05, has libvirt packages installed that are affected by multiple\nvulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data) sub-\n operations. These sub-operations allow the processor to\n hand-off address generation logic into these sub-\n operations for optimized writes. Both of these sub-\n operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill\n buffer, a mechanism used by modern CPUs when a cache-\n miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to\n perform load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing side-\n channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"http://security.gd-linux.com/notice/NS-SA-2019-0152\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the vulnerable CGSL libvirt packages. Note that updated packages may not be available yet. Please contact ZTE\nfor more information.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"NewStart CGSL Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/ZTE-CGSL/release\", \"Host/ZTE-CGSL/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/ZTE-CGSL/release\");\nif (isnull(release) || release !~ \"^CGSL (MAIN|CORE)\") audit(AUDIT_OS_NOT, \"NewStart Carrier Grade Server Linux\");\n\nif (release !~ \"CGSL MAIN 4.05\")\n audit(AUDIT_OS_NOT, 'NewStart CGSL MAIN 4.05');\n\nif (!get_kb_item(\"Host/ZTE-CGSL/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"NewStart Carrier Grade Server Linux\", cpu);\n\nflag = 0;\n\npkgs = {\n \"CGSL MAIN 4.05\": [\n \"libvirt-0.10.2-64.el6_10.1\",\n \"libvirt-client-0.10.2-64.el6_10.1\",\n \"libvirt-debuginfo-0.10.2-64.el6_10.1\",\n \"libvirt-devel-0.10.2-64.el6_10.1\",\n \"libvirt-lock-sanlock-0.10.2-64.el6_10.1\",\n \"libvirt-python-0.10.2-64.el6_10.1\"\n ]\n};\npkg_list = pkgs[release];\n\nforeach (pkg in pkg_list)\n if (rpm_check(release:\"ZTE \" + release, reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:23:37", "description": "The remote NewStart CGSL host, running version MAIN 4.05, has qemu-kvm packages installed that are affected by multiple vulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub- operations. These sub-operations allow the processor to hand-off address generation logic into these sub- operations for optimized writes. Both of these sub- operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill buffer, a mechanism used by modern CPUs when a cache- miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side- channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-08-12T00:00:00", "type": "nessus", "title": "NewStart CGSL MAIN 4.05 : qemu-kvm Multiple Vulnerabilities (NS-SA-2019-0154)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": [], "id": "NEWSTART_CGSL_NS-SA-2019-0154_QEMU-KVM.NASL", "href": "https://www.tenable.com/plugins/nessus/127430", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\n# The descriptive text and package checks in this plugin were\n# extracted from ZTE advisory NS-SA-2019-0154. The text\n# itself is copyright (C) ZTE, Inc.\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127430);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"NewStart CGSL MAIN 4.05 : qemu-kvm Multiple Vulnerabilities (NS-SA-2019-0154)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote machine is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote NewStart CGSL host, running version MAIN 4.05, has qemu-kvm packages installed that are affected by multiple\nvulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data) sub-\n operations. These sub-operations allow the processor to\n hand-off address generation logic into these sub-\n operations for optimized writes. Both of these sub-\n operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill\n buffer, a mechanism used by modern CPUs when a cache-\n miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to\n perform load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing side-\n channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"http://security.gd-linux.com/notice/NS-SA-2019-0154\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the vulnerable CGSL qemu-kvm packages. Note that updated packages may not be available yet. Please contact ZTE\nfor more information.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"NewStart CGSL Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/ZTE-CGSL/release\", \"Host/ZTE-CGSL/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/ZTE-CGSL/release\");\nif (isnull(release) || release !~ \"^CGSL (MAIN|CORE)\") audit(AUDIT_OS_NOT, \"NewStart Carrier Grade Server Linux\");\n\nif (release !~ \"CGSL MAIN 4.05\")\n audit(AUDIT_OS_NOT, 'NewStart CGSL MAIN 4.05');\n\nif (!get_kb_item(\"Host/ZTE-CGSL/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"NewStart Carrier Grade Server Linux\", cpu);\n\nflag = 0;\n\npkgs = {\n \"CGSL MAIN 4.05\": [\n \"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\",\n \"qemu-img-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-debuginfo-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-tools-0.12.1.2-2.506.el6_10.3\"\n ]\n};\npkg_list = pkgs[release];\n\nforeach (pkg in pkg_list)\n if (rpm_check(release:\"ZTE \" + release, reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-kvm\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:53", "description": "This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release (boo#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127 CVE-2019-11091)\n\nRelease notes :\n\n - Processor Identifier Version Products\n\n - Model Stepping F-MO-S/PI Old->New\n\n - ---- new platforms\n ----------------------------------------\n\n - CLX-SP B1 6-55-7/bf 05000021 Xeon Scalable Gen2\n\n - ---- updated platforms\n ------------------------------------\n\n - SNB D2/G1/Q0 6-2a-7/12 0000002e->0000002f Core Gen2\n\n - IVB E1/L1 6-3a-9/12 00000020->00000021 Core Gen3\n\n - HSW C0 6-3c-3/32 00000025->00000027 Core Gen4\n\n - BDW-U/Y E0/F0 6-3d-4/c0 0000002b->0000002d Core Gen5\n\n - IVB-E/EP C1/M1/S1 6-3e-4/ed 0000042e->0000042f Core Gen3 X Series; Xeon E5 v2\n\n - IVB-EX D1 6-3e-7/ed 00000714->00000715 Xeon E7 v2\n\n - HSX-E/EP Cx/M1 6-3f-2/6f 00000041->00000043 Core Gen4 X series; Xeon E5 v3\n\n - HSX-EX E0 6-3f-4/80 00000013->00000014 Xeon E7 v3\n\n - HSW-U C0/D0 6-45-1/72 00000024->00000025 Core Gen4\n\n - HSW-H C0 6-46-1/32 0000001a->0000001b Core Gen4\n\n - BDW-H/E3 E0/G0 6-47-1/22 0000001e->00000020 Core Gen5\n\n - SKL-U/Y D0/K1 6-4e-3/c0 000000c6->000000cc Core Gen6 \n\n - SKX-SP H0/M0/U0 6-55-4/b7 0200005a->0000005e Xeon Scalable\n\n - SKX-D M1 6-55-4/b7 0200005a->0000005e Xeon D-21xx\n\n - BDX-DE V1 6-56-2/10 00000019->0000001a Xeon D-1520/40\n\n - BDX-DE V2/3 6-56-3/10 07000016->07000017 Xeon D-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19\n\n - BDX-DE Y0 6-56-4/10 0f000014->0f000015 Xeon D-1557/59/67/71/77/81/87\n\n - BDX-NS A0 6-56-5/10 0e00000c->0e00000d Xeon D-1513N/23/33/43/53\n\n - APL D0 6-5c-9/03 00000036->00000038 Pentium N/J4xxx, Celeron N/J3xxx, Atom x5/7-E39xx\n\n - SKL-H/S R0/N0 6-5e-3/36 000000c6->000000cc Core Gen6;\n Xeon E3 v5\n\n - DNV B0 6-5f-1/01 00000024->0000002e Atom Processor C Series\n\n - GLK B0 6-7a-1/01 0000002c->0000002e Pentium Silver N/J5xxx, Celeron N/J4xxx\n\n - AML-Y22 H0 6-8e-9/10 0000009e->000000b4 Core Gen8 Mobile\n\n - KBL-U/Y H0 6-8e-9/c0 0000009a->000000b4 Core Gen7 Mobile\n\n - CFL-U43e D0 6-8e-a/c0 0000009e->000000b4 Core Gen8 Mobile\n\n - WHL-U W0 6-8e-b/d0 000000a4->000000b8 Core Gen8 Mobile\n\n - WHL-U V0 6-8e-d/94 000000b2->000000b8 Core Gen8 Mobile\n\n - KBL-G/H/S/E3 B0 6-9e-9/2a 0000009a->000000b4 Core Gen7;\n Xeon E3 v6\n\n - CFL-H/S/E3 U0 6-9e-a/22 000000aa->000000b4 Core Gen8 Desktop, Mobile, Xeon E\n\n - CFL-S B0 6-9e-b/02 000000aa->000000b4 Core Gen8\n\n - CFL-H/S P0 6-9e-c/22 000000a2->000000ae Core Gen9\n\n - CFL-H R0 6-9e-d/22 000000b0->000000b8 Core Gen9 Mobile\n\nIt also contains the update to 20190312 release (boo#1129231) :\n\n - Processor Identifier Version Products\n\n - Model Stepping F-MO-S/PI Old->New\n\n - ---- new platforms\n ----------------------------------------\n\n - AML-Y22 H0 6-8e-9/10 0000009e Core Gen8 Mobile\n\n - WHL-U W0 6-8e-b/d0 000000a4 Core Gen8 Mobile\n\n - WHL-U V0 6-8e-d/94 000000b2 Core Gen8 Mobile\n\n - CFL-S P0 6-9e-c/22 000000a2 Core Gen9 Desktop\n\n - CFL-H R0 6-9e-d/22 000000b0 Core Gen9 Mobile\n\n - ---- updated platforms\n ------------------------------------\n\n - HSX-E/EP Cx/M1 6-3f-2/6f 0000003d->00000041 Core Gen4 X series; Xeon E5 v3\n\n - HSX-EX E0 6-3f-4/80 00000012->00000013 Xeon E7 v3\n\n - SKX-SP H0/M0/U0 6-55-4/b7 0200004d->0000005a Xeon Scalable\n\n - SKX-D M1 6-55-4/b7 0200004d->0000005a Xeon D-21xx\n\n - BDX-DE V1 6-56-2/10 00000017->00000019 Xeon D-1520/40\n\n - BDX-DE V2/3 6-56-3/10 07000013->07000016 Xeon D-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19\n\n - BDX-DE Y0 6-56-4/10 0f000012->0f000014 Xeon D-1557/59/67/71/77/81/87\n\n - BDX-NS A0 6-56-5/10 0e00000a->0e00000c Xeon D-1513N/23/33/43/53\n\n - APL D0 6-5c-9/03 00000032->00000036 Pentium N/J4xxx, Celeron N/J3xxx, Atom x5/7-E39xx\n\n - APL E0 6-5c-a/03 0000000c->00000010 Atom x5/7-E39xx\n\n - GLK B0 6-7a-1/01 00000028->0000002c Pentium Silver N/J5xxx, Celeron N/J4xxx\n\n - KBL-U/Y H0 6-8e-9/c0 0000008e->0000009a Core Gen7 Mobile\n\n - CFL-U43e D0 6-8e-a/c0 00000096->0000009e Core Gen8 Mobile\n\n - KBL-H/S/E3 B0 6-9e-9/2a 0000008e->0000009a Core Gen7;\n Xeon E3 v6\n\n - CFL-H/S/E3 U0 6-9e-a/22 00000096->000000aa Core Gen8 Desktop, Mobile, Xeon E\n\n - CFL-S B0 6-9e-b/02 0000008e->000000aa Core Gen8\n\nAnd it also contains the update to 20180807a, no change except licensing. (boo#1104479).", "cvss3": {}, "published": "2019-05-21T00:00:00", "type": "nessus", "title": "openSUSE Security Update : ucode-intel (openSUSE-2019-1408) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-19T00:00:00", "cpe": ["p-cpe:/a:novell:opensuse:ucode-intel", "p-cpe:/a:novell:opensuse:ucode-intel-blob", "p-cpe:/a:novell:opensuse:ucode-intel-debuginfo", "p-cpe:/a:novell:opensuse:ucode-intel-debugsource", "cpe:/o:novell:opensuse:42.3"], "id": "OPENSUSE-2019-1408.NASL", "href": "https://www.tenable.com/plugins/nessus/125304", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from openSUSE Security Update openSUSE-2019-1408.\n#\n# The text description of this plugin is (C) SUSE LLC.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125304);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/19\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"openSUSE Security Update : ucode-intel (openSUSE-2019-1408) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Check for the openSUSE-2019-1408 patch\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote openSUSE host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release\n(boo#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127\nCVE-2019-11091)\n\nRelease notes :\n\n - Processor Identifier Version Products\n\n - Model Stepping F-MO-S/PI Old->New\n\n - ---- new platforms\n ----------------------------------------\n\n - CLX-SP B1 6-55-7/bf 05000021 Xeon Scalable Gen2\n\n - ---- updated platforms\n ------------------------------------\n\n - SNB D2/G1/Q0 6-2a-7/12 0000002e->0000002f Core Gen2\n\n - IVB E1/L1 6-3a-9/12 00000020->00000021 Core Gen3\n\n - HSW C0 6-3c-3/32 00000025->00000027 Core Gen4\n\n - BDW-U/Y E0/F0 6-3d-4/c0 0000002b->0000002d Core Gen5\n\n - IVB-E/EP C1/M1/S1 6-3e-4/ed 0000042e->0000042f Core Gen3\n X Series; Xeon E5 v2\n\n - IVB-EX D1 6-3e-7/ed 00000714->00000715 Xeon E7 v2\n\n - HSX-E/EP Cx/M1 6-3f-2/6f 00000041->00000043 Core Gen4 X\n series; Xeon E5 v3\n\n - HSX-EX E0 6-3f-4/80 00000013->00000014 Xeon E7 v3\n\n - HSW-U C0/D0 6-45-1/72 00000024->00000025 Core Gen4\n\n - HSW-H C0 6-46-1/32 0000001a->0000001b Core Gen4\n\n - BDW-H/E3 E0/G0 6-47-1/22 0000001e->00000020 Core Gen5\n\n - SKL-U/Y D0/K1 6-4e-3/c0 000000c6->000000cc Core Gen6 \n\n - SKX-SP H0/M0/U0 6-55-4/b7 0200005a->0000005e Xeon\n Scalable\n\n - SKX-D M1 6-55-4/b7 0200005a->0000005e Xeon D-21xx\n\n - BDX-DE V1 6-56-2/10 00000019->0000001a Xeon D-1520/40\n\n - BDX-DE V2/3 6-56-3/10 07000016->07000017 Xeon\n D-1518/19/21/27/28/31/33/37/41/48, Pentium\n D1507/08/09/17/19\n\n - BDX-DE Y0 6-56-4/10 0f000014->0f000015 Xeon\n D-1557/59/67/71/77/81/87\n\n - BDX-NS A0 6-56-5/10 0e00000c->0e00000d Xeon\n D-1513N/23/33/43/53\n\n - APL D0 6-5c-9/03 00000036->00000038 Pentium N/J4xxx,\n Celeron N/J3xxx, Atom x5/7-E39xx\n\n - SKL-H/S R0/N0 6-5e-3/36 000000c6->000000cc Core Gen6;\n Xeon E3 v5\n\n - DNV B0 6-5f-1/01 00000024->0000002e Atom Processor C\n Series\n\n - GLK B0 6-7a-1/01 0000002c->0000002e Pentium Silver\n N/J5xxx, Celeron N/J4xxx\n\n - AML-Y22 H0 6-8e-9/10 0000009e->000000b4 Core Gen8 Mobile\n\n - KBL-U/Y H0 6-8e-9/c0 0000009a->000000b4 Core Gen7 Mobile\n\n - CFL-U43e D0 6-8e-a/c0 0000009e->000000b4 Core Gen8\n Mobile\n\n - WHL-U W0 6-8e-b/d0 000000a4->000000b8 Core Gen8 Mobile\n\n - WHL-U V0 6-8e-d/94 000000b2->000000b8 Core Gen8 Mobile\n\n - KBL-G/H/S/E3 B0 6-9e-9/2a 0000009a->000000b4 Core Gen7;\n Xeon E3 v6\n\n - CFL-H/S/E3 U0 6-9e-a/22 000000aa->000000b4 Core Gen8\n Desktop, Mobile, Xeon E\n\n - CFL-S B0 6-9e-b/02 000000aa->000000b4 Core Gen8\n\n - CFL-H/S P0 6-9e-c/22 000000a2->000000ae Core Gen9\n\n - CFL-H R0 6-9e-d/22 000000b0->000000b8 Core Gen9 Mobile\n\nIt also contains the update to 20190312 release (boo#1129231) :\n\n - Processor Identifier Version Products\n\n - Model Stepping F-MO-S/PI Old->New\n\n - ---- new platforms\n ----------------------------------------\n\n - AML-Y22 H0 6-8e-9/10 0000009e Core Gen8 Mobile\n\n - WHL-U W0 6-8e-b/d0 000000a4 Core Gen8 Mobile\n\n - WHL-U V0 6-8e-d/94 000000b2 Core Gen8 Mobile\n\n - CFL-S P0 6-9e-c/22 000000a2 Core Gen9 Desktop\n\n - CFL-H R0 6-9e-d/22 000000b0 Core Gen9 Mobile\n\n - ---- updated platforms\n ------------------------------------\n\n - HSX-E/EP Cx/M1 6-3f-2/6f 0000003d->00000041 Core Gen4 X\n series; Xeon E5 v3\n\n - HSX-EX E0 6-3f-4/80 00000012->00000013 Xeon E7 v3\n\n - SKX-SP H0/M0/U0 6-55-4/b7 0200004d->0000005a Xeon\n Scalable\n\n - SKX-D M1 6-55-4/b7 0200004d->0000005a Xeon D-21xx\n\n - BDX-DE V1 6-56-2/10 00000017->00000019 Xeon D-1520/40\n\n - BDX-DE V2/3 6-56-3/10 07000013->07000016 Xeon\n D-1518/19/21/27/28/31/33/37/41/48, Pentium\n D1507/08/09/17/19\n\n - BDX-DE Y0 6-56-4/10 0f000012->0f000014 Xeon\n D-1557/59/67/71/77/81/87\n\n - BDX-NS A0 6-56-5/10 0e00000a->0e00000c Xeon\n D-1513N/23/33/43/53\n\n - APL D0 6-5c-9/03 00000032->00000036 Pentium N/J4xxx,\n Celeron N/J3xxx, Atom x5/7-E39xx\n\n - APL E0 6-5c-a/03 0000000c->00000010 Atom x5/7-E39xx\n\n - GLK B0 6-7a-1/01 00000028->0000002c Pentium Silver\n N/J5xxx, Celeron N/J4xxx\n\n - KBL-U/Y H0 6-8e-9/c0 0000008e->0000009a Core Gen7 Mobile\n\n - CFL-U43e D0 6-8e-a/c0 00000096->0000009e Core Gen8\n Mobile\n\n - KBL-H/S/E3 B0 6-9e-9/2a 0000008e->0000009a Core Gen7;\n Xeon E3 v6\n\n - CFL-H/S/E3 U0 6-9e-a/22 00000096->000000aa Core Gen8\n Desktop, Mobile, Xeon E\n\n - CFL-S B0 6-9e-b/02 0000008e->000000aa Core Gen8\n\nAnd it also contains the update to 20180807a, no change except\nlicensing. (boo#1104479).\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1104479\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1129231\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected ucode-intel packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:ucode-intel-blob\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:ucode-intel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:ucode-intel-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:opensuse:42.3\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/20\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/21\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release =~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"openSUSE\");\nif (release !~ \"^(SUSE42\\.3)$\") audit(AUDIT_OS_RELEASE_NOT, \"openSUSE\", \"42.3\", release);\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nourarch = get_kb_item(\"Host/cpu\");\nif (!ourarch) audit(AUDIT_UNKNOWN_ARCH);\nif (ourarch !~ \"^(i586|i686|x86_64)$\") audit(AUDIT_ARCH_NOT, \"i586 / i686 / x86_64\", ourarch);\n\nflag = 0;\n\nif ( rpm_check(release:\"SUSE42.3\", reference:\"ucode-intel-20190514-32.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"ucode-intel-blob-20190514-32.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"ucode-intel-debuginfo-20190514-32.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"ucode-intel-debugsource-20190514-32.1\") ) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel / ucode-intel-blob / ucode-intel-debuginfo / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:53", "description": "This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software mitigations.\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes: Processor Identifier Version Products\n\nModel Stepping F-MO-S/PI Old->New\n\n---- new platforms ----------------------------------------\n\nCLX-SP B1 6-55-7/bf 05000021 Xeon Scalable Gen2\n\n---- updated platforms ------------------------------------\n\nSNB D2/G1/Q0 6-2a-7/12 0000002e->0000002f Core Gen2\n\nIVB E1/L1 6-3a-9/12 00000020->00000021 Core Gen3\n\nHSW C0 6-3c-3/32 00000025->00000027 Core Gen4\n\nBDW-U/Y E0/F0 6-3d-4/c0 0000002b->0000002d Core Gen5\n\nIVB-E/EP C1/M1/S1 6-3e-4/ed 0000042e->0000042f Core Gen3 X Series;\nXeon E5 v2\n\nIVB-EX D1 6-3e-7/ed 00000714->00000715 Xeon E7 v2\n\nHSX-E/EP Cx/M1 6-3f-2/6f 00000041->00000043 Core Gen4 X series; Xeon E5 v3\n\nHSX-EX E0 6-3f-4/80 00000013->00000014 Xeon E7 v3\n\nHSW-U C0/D0 6-45-1/72 00000024->00000025 Core Gen4\n\nHSW-H C0 6-46-1/32 0000001a->0000001b Core Gen4\n\nBDW-H/E3 E0/G0 6-47-1/22 0000001e->00000020 Core Gen5\n\nSKL-U/Y D0/K1 6-4e-3/c0 000000c6->000000cc Core Gen6\n\nSKX-SP H0/M0/U0 6-55-4/b7 0200005a->0000005e Xeon Scalable\n\nSKX-D M1 6-55-4/b7 0200005a->0000005e Xeon D-21xx\n\nBDX-DE V1 6-56-2/10 00000019->0000001a Xeon D-1520/40\n\nBDX-DE V2/3 6-56-3/10 07000016->07000017 Xeon D-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19\n\nBDX-DE Y0 6-56-4/10 0f000014->0f000015 Xeon D-1557/59/67/71/77/81/87\n\nBDX-NS A0 6-56-5/10 0e00000c->0e00000d Xeon D-1513N/23/33/43/53\n\nAPL D0 6-5c-9/03 00000036->00000038 Pentium N/J4xxx, Celeron N/J3xxx, Atom x5/7-E39xx\n\nSKL-H/S R0/N0 6-5e-3/36 000000c6->000000cc Core Gen6; Xeon E3 v5\n\nDNV B0 6-5f-1/01 00000024->0000002e Atom Processor C Series\n\nGLK B0 6-7a-1/01 0000002c->0000002e Pentium Silver N/J5xxx, Celeron N/J4xxx\n\nAML-Y22 H0 6-8e-9/10 0000009e->000000b4 Core Gen8 Mobile\n\nKBL-U/Y H0 6-8e-9/c0 0000009a->000000b4 Core Gen7 Mobile\n\nCFL-U43e D0 6-8e-a/c0 0000009e->000000b4 Core Gen8 Mobile\n\nWHL-U W0 6-8e-b/d0 000000a4->000000b8 Core Gen8 Mobile\n\nWHL-U V0 6-8e-d/94 000000b2->000000b8 Core Gen8 Mobile\n\nKBL-G/H/S/E3 B0 6-9e-9/2a 0000009a->000000b4 Core Gen7; Xeon E3 v6\n\nCFL-H/S/E3 U0 6-9e-a/22 000000aa->000000b4 Core Gen8 Desktop, Mobile, Xeon E\n\nCFL-S B0 6-9e-b/02 000000aa->000000b4 Core Gen8\n\nCFL-H/S P0 6-9e-c/22 000000a2->000000ae Core Gen9\n\nCFL-H R0 6-9e-d/22 000000b0->000000b8 Core Gen9 Mobile\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "SUSE SLED15 / SLES15 Security Update : ucode-intel (SUSE-SU-2019:1236-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:ucode-intel", "cpe:/o:novell:suse_linux:15"], "id": "SUSE_SU-2019-1236-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125131", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1236-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125131);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"SUSE SLED15 / SLES15 Security Update : ucode-intel (SUSE-SU-2019:1236-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated package.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote SUSE host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release\n(bsc#1111331)\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n(MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software\nmitigations.\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes: Processor Identifier Version Products\n\nModel Stepping F-MO-S/PI Old->New\n\n---- new platforms ----------------------------------------\n\nCLX-SP B1 6-55-7/bf 05000021 Xeon Scalable Gen2\n\n---- updated platforms ------------------------------------\n\nSNB D2/G1/Q0 6-2a-7/12 0000002e->0000002f Core Gen2\n\nIVB E1/L1 6-3a-9/12 00000020->00000021 Core Gen3\n\nHSW C0 6-3c-3/32 00000025->00000027 Core Gen4\n\nBDW-U/Y E0/F0 6-3d-4/c0 0000002b->0000002d Core Gen5\n\nIVB-E/EP C1/M1/S1 6-3e-4/ed 0000042e->0000042f Core Gen3 X Series;\nXeon E5 v2\n\nIVB-EX D1 6-3e-7/ed 00000714->00000715 Xeon E7 v2\n\nHSX-E/EP Cx/M1 6-3f-2/6f 00000041->00000043 Core Gen4 X series; Xeon\nE5 v3\n\nHSX-EX E0 6-3f-4/80 00000013->00000014 Xeon E7 v3\n\nHSW-U C0/D0 6-45-1/72 00000024->00000025 Core Gen4\n\nHSW-H C0 6-46-1/32 0000001a->0000001b Core Gen4\n\nBDW-H/E3 E0/G0 6-47-1/22 0000001e->00000020 Core Gen5\n\nSKL-U/Y D0/K1 6-4e-3/c0 000000c6->000000cc Core Gen6\n\nSKX-SP H0/M0/U0 6-55-4/b7 0200005a->0000005e Xeon Scalable\n\nSKX-D M1 6-55-4/b7 0200005a->0000005e Xeon D-21xx\n\nBDX-DE V1 6-56-2/10 00000019->0000001a Xeon D-1520/40\n\nBDX-DE V2/3 6-56-3/10 07000016->07000017 Xeon\nD-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19\n\nBDX-DE Y0 6-56-4/10 0f000014->0f000015 Xeon D-1557/59/67/71/77/81/87\n\nBDX-NS A0 6-56-5/10 0e00000c->0e00000d Xeon D-1513N/23/33/43/53\n\nAPL D0 6-5c-9/03 00000036->00000038 Pentium N/J4xxx, Celeron N/J3xxx,\nAtom x5/7-E39xx\n\nSKL-H/S R0/N0 6-5e-3/36 000000c6->000000cc Core Gen6; Xeon E3 v5\n\nDNV B0 6-5f-1/01 00000024->0000002e Atom Processor C Series\n\nGLK B0 6-7a-1/01 0000002c->0000002e Pentium Silver N/J5xxx, Celeron\nN/J4xxx\n\nAML-Y22 H0 6-8e-9/10 0000009e->000000b4 Core Gen8 Mobile\n\nKBL-U/Y H0 6-8e-9/c0 0000009a->000000b4 Core Gen7 Mobile\n\nCFL-U43e D0 6-8e-a/c0 0000009e->000000b4 Core Gen8 Mobile\n\nWHL-U W0 6-8e-b/d0 000000a4->000000b8 Core Gen8 Mobile\n\nWHL-U V0 6-8e-d/94 000000b2->000000b8 Core Gen8 Mobile\n\nKBL-G/H/S/E3 B0 6-9e-9/2a 0000009a->000000b4 Core Gen7; Xeon E3 v6\n\nCFL-H/S/E3 U0 6-9e-a/22 000000aa->000000b4 Core Gen8 Desktop, Mobile,\nXeon E\n\nCFL-S B0 6-9e-b/02 000000aa->000000b4 Core Gen8\n\nCFL-H/S P0 6-9e-c/22 000000a2->000000ae Core Gen9\n\nCFL-H R0 6-9e-d/22 000000b0->000000b8 Core Gen9 Mobile\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12126/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12127/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12130/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2019-11091/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/support/kb/doc/?id=7023736\"\n );\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191236-1/\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?a208eff5\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE Linux Enterprise Module for Basesystem 15:zypper in -t patch\nSUSE-SLE-Module-Basesystem-15-2019-1236=1\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:15\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED15|SLES15)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED15 / SLES15\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\nif (cpu >!< \"x86_64\") audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES15\" && (! preg(pattern:\"^(0)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES15 SP0\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED15\" && (! preg(pattern:\"^(0)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED15 SP0\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-20190507-3.15.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-20190507-3.15.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:25", "description": "This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the new 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-28T00:00:00", "type": "nessus", "title": "SUSE SLED12 / SLES12 Security Update : libvirt (SUSE-SU-2019:1347-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-13T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:libvirt", "p-cpe:/a:novell:suse_linux:libvirt-admin", "p-cpe:/a:novell:suse_linux:libvirt-admin-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-client", "p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-hooks", "p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-xen", "p-cpe:/a:novell:suse_linux:libvirt-debugsource", "p-cpe:/a:novell:suse_linux:libvirt-doc", "p-cpe:/a:novell:suse_linux:libvirt-libs", "p-cpe:/a:novell:suse_linux:libvirt-libs-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-nss", "p-cpe:/a:novell:suse_linux:libvirt-nss-debuginfo", "cpe:/o:novell:suse_linux:12"], "id": "SUSE_SU-2019-1347-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125462", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1347-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125462);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/13\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"SUSE SLED12 / SLES12 Security Update : libvirt (SUSE-SU-2019:1347-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\",\n value:\"The remote SUSE host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\",\n value:\n\"This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n(MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the\nnew 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1135273\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12126/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12127/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12130/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2019-11091/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/support/kb/doc/?id=7023736\"\n );\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191347-1/\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?8beb21f4\"\n );\n script_set_attribute(\n attribute:\"solution\",\n value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE Linux Enterprise Software Development Kit 12-SP4:zypper in -t\npatch SUSE-SLE-SDK-12-SP4-2019-1347=1\n\nSUSE Linux Enterprise Server 12-SP4:zypper in -t patch\nSUSE-SLE-SERVER-12-SP4-2019-1347=1\n\nSUSE Linux Enterprise Desktop 12-SP4:zypper in -t patch\nSUSE-SLE-DESKTOP-12-SP4-2019-1347=1\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-admin-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-hooks\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-libs-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-nss-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:12\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/24\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/28\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED12|SLES12)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED12 / SLES12\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES12\" && (! preg(pattern:\"^(4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES12 SP4\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED12\" && (! preg(pattern:\"^(4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED12 SP4\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-xen-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-admin-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-admin-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-client-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-client-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-config-network-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-config-nwfilter-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-interface-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-interface-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-lxc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-lxc-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-network-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-network-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-nodedev-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-nodedev-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-nwfilter-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-nwfilter-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-qemu-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-qemu-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-secret-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-secret-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-core-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-core-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-disk-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-disk-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-iscsi-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-iscsi-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-logical-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-logical-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-mpath-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-mpath-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-scsi-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-scsi-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-hooks-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-lxc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-qemu-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-debugsource-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-doc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-libs-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-libs-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-lock-sanlock-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-lock-sanlock-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-nss-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-nss-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-admin-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-admin-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-client-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-client-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-network-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-nwfilter-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-lxc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-qemu-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-xen-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-debugsource-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-doc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-libs-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-libs-debuginfo-4.0.0-8.12.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:47", "description": "This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the new 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-28T00:00:00", "type": "nessus", "title": "SUSE SLED15 / SLES15 Security Update : libvirt (SUSE-SU-2019:1356-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-13T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:libvirt", "p-cpe:/a:novell:suse_linux:libvirt-admin", "p-cpe:/a:novell:suse_linux:libvirt-admin-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-client", "p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-hooks", "p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-xen", "p-cpe:/a:novell:suse_linux:libvirt-debugsource", "p-cpe:/a:novell:suse_linux:libvirt-devel", "p-cpe:/a:novell:suse_linux:libvirt-doc", "p-cpe:/a:novell:suse_linux:libvirt-libs", "p-cpe:/a:novell:suse_linux:libvirt-libs-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-nss", "p-cpe:/a:novell:suse_linux:libvirt-nss-debuginfo", "p-cpe:/a:novell:suse_linux:wireshark-plugin-libvirt", "p-cpe:/a:novell:suse_linux:wireshark-plugin-libvirt-debuginfo", "cpe:/o:novell:suse_linux:15"], "id": "SUSE_SU-2019-1356-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125469", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1356-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125469);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/13\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"SUSE SLED15 / SLES15 Security Update : libvirt (SUSE-SU-2019:1356-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\",\n value:\"The remote SUSE host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\",\n value:\n\"This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n(MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the\nnew 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1135273\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12126/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12127/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12130/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2019-11091/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/support/kb/doc/?id=7023736\"\n );\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191356-1/\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?86c77d80\"\n );\n script_set_attribute(\n attribute:\"solution\",\n value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE Linux Enterprise Module for Server Applications 15:zypper in -t\npatch SUSE-SLE-Module-Server-Applications-15-2019-1356=1\n\nSUSE Linux Enterprise Module for Open Buildservice Development Tools\n15:zypper in -t patch\nSUSE-SLE-Module-Development-Tools-OBS-15-2019-1356=1\n\nSUSE Linux Enterprise Module for Basesystem 15:zypper in -t patch\nSUSE-SLE-Module-Basesystem-15-2019-1356=1\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-admin-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-hooks\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-libs-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-nss-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:wireshark-plugin-libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:wireshark-plugin-libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:15\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/27\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/28\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED15|SLES15)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED15 / SLES15\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES15\" && (! preg(pattern:\"^(0)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES15 SP0\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED15\" && (! preg(pattern:\"^(0)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED15 SP0\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"libvirt-daemon-xen-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-admin-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-admin-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-client-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-client-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-config-network-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-config-nwfilter-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-interface-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-interface-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-lxc-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-lxc-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-network-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-network-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-nodedev-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-nodedev-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-nwfilter-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-nwfilter-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-qemu-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-qemu-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-secret-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-secret-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-core-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-core-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-disk-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-disk-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-iscsi-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-iscsi-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-logical-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-logical-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-mpath-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-mpath-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-scsi-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-scsi-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-hooks-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-lxc-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-daemon-qemu-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-debugsource-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-devel-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-doc-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-libs-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-libs-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-lock-sanlock-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-lock-sanlock-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-nss-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"libvirt-nss-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"wireshark-plugin-libvirt-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLES15\", sp:\"0\", reference:\"wireshark-plugin-libvirt-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", reference:\"libvirt-debugsource-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", reference:\"libvirt-libs-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", reference:\"libvirt-libs-debuginfo-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", reference:\"wireshark-plugin-libvirt-4.0.0-9.22.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", reference:\"wireshark-plugin-libvirt-debuginfo-4.0.0-9.22.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:17:50", "description": "This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the new 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-06-07T00:00:00", "type": "nessus", "title": "SUSE SLES12 Security Update : libvirt (SUSE-SU-2019:1423-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:libvirt", "p-cpe:/a:novell:suse_linux:libvirt-client", "p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-xen", "p-cpe:/a:novell:suse_linux:libvirt-debugsource", "p-cpe:/a:novell:suse_linux:libvirt-doc", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo", "cpe:/o:novell:suse_linux:12"], "id": "SUSE_SU-2019-1423-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125761", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1423-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125761);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"SUSE SLES12 Security Update : libvirt (SUSE-SU-2019:1423-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n(MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the\nnew 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/show_bug.cgi?id=1135273\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12126/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12127/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12130/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2019-11091/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/support/kb/doc/?id=7023736\");\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191423-1/\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?409d61d2\");\n script_set_attribute(attribute:\"solution\", value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE Linux Enterprise Server 12-LTSS:zypper in -t patch\nSUSE-SLE-SERVER-12-2019-1423=1\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/06/05\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/06/07\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:12\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLES12)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLES12\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES12\" && (! preg(pattern:\"^(0)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES12 SP0\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES12\", sp:\"0\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-debuginfo-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", cpu:\"x86_64\", reference:\"libvirt-daemon-xen-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-client-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-client-debuginfo-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-config-network-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-config-nwfilter-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-debuginfo-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-interface-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-interface-debuginfo-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-lxc-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-lxc-debuginfo-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-network-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-network-debuginfo-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-nodedev-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-nodedev-debuginfo-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-nwfilter-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-nwfilter-debuginfo-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-qemu-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-qemu-debuginfo-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-secret-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-secret-debuginfo-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-driver-storage-debuginfo-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-lxc-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-daemon-qemu-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-debugsource-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-doc-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-lock-sanlock-1.2.5-27.16.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", reference:\"libvirt-lock-sanlock-debuginfo-1.2.5-27.16.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:18:36", "description": "This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the new 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-06-10T00:00:00", "type": "nessus", "title": "SUSE SLES12 Security Update : libvirt (SUSE-SU-2019:1452-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:libvirt", "p-cpe:/a:novell:suse_linux:libvirt-client", "p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-xen", "p-cpe:/a:novell:suse_linux:libvirt-debugsource", "p-cpe:/a:novell:suse_linux:libvirt-doc", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo", "cpe:/o:novell:suse_linux:12"], "id": "SUSE_SU-2019-1452-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125800", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1452-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125800);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"SUSE SLES12 Security Update : libvirt (SUSE-SU-2019:1452-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n(MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the\nnew 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/show_bug.cgi?id=1135273\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12126/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12127/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12130/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2019-11091/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/support/kb/doc/?id=7023736\");\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191452-1/\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?34674ba9\");\n script_set_attribute(attribute:\"solution\", value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE Linux Enterprise Server for SAP 12-SP1:zypper in -t patch\nSUSE-SLE-SAP-12-SP1-2019-1452=1\n\nSUSE Linux Enterprise Server 12-SP1-LTSS:zypper in -t patch\nSUSE-SLE-SERVER-12-SP1-2019-1452=1\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/06/07\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/06/10\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:12\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLES12)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLES12\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES12\" && (! preg(pattern:\"^(1)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES12 SP1\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-debuginfo-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"libvirt-daemon-xen-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-client-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-client-debuginfo-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-config-network-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-config-nwfilter-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-debuginfo-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-interface-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-interface-debuginfo-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-lxc-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-lxc-debuginfo-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-network-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-network-debuginfo-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-nodedev-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-nodedev-debuginfo-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-nwfilter-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-nwfilter-debuginfo-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-qemu-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-qemu-debuginfo-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-secret-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-secret-debuginfo-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-storage-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-driver-storage-debuginfo-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-lxc-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-daemon-qemu-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-debugsource-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-doc-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-lock-sanlock-1.2.18.4-22.10.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", reference:\"libvirt-lock-sanlock-debuginfo-1.2.18.4-22.10.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:23", "description": "USN-3977-1 provided mitigations for Microarchitectural Data Sampling (MDS) vulnerabilities in Intel Microcode for a large number of Intel processor families. This update provides the corresponding updated microcode mitigations for Intel Cherry Trail and Bay Trail processor families.\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan Horea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss discovered that memory previously stored in microarchitectural fill buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information.\n(CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered that memory previously stored in microarchitectural load ports of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel Moghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel Gruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory previously stored in microarchitectural store buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur, Moritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered that uncacheable memory previously stored in microarchitectural buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2019-11091).\n\nNote that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-23T00:00:00", "type": "nessus", "title": "Ubuntu 16.04 LTS / 18.04 LTS / 18.10 / 19.04 : Intel Microcode update (USN-3977-2) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-09-17T00:00:00", "cpe": ["p-cpe:/a:canonical:ubuntu_linux:intel-microcode", "cpe:/o:canonical:ubuntu_linux:14.04", "cpe:/o:canonical:ubuntu_linux:16.04", "cpe:/o:canonical:ubuntu_linux:18.04:-:lts", "cpe:/o:canonical:ubuntu_linux:18.10", "cpe:/o:canonical:ubuntu_linux:19.04"], "id": "UBUNTU_USN-3977-2.NASL", "href": "https://www.tenable.com/plugins/nessus/125353", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Ubuntu Security Notice USN-3977-2. The text \n# itself is copyright (C) Canonical, Inc. See \n# <http://www.ubuntu.com/usn/>. Ubuntu(R) is a registered \n# trademark of Canonical, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125353);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/09/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"USN\", value:\"3977-2\");\n\n script_name(english:\"Ubuntu 16.04 LTS / 18.04 LTS / 18.10 / 19.04 : Intel Microcode update (USN-3977-2) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks dpkg output for updated package.\");\n\n script_set_attribute(\n attribute:\"synopsis\",\n value:\"The remote Ubuntu host is missing a security-related patch.\"\n );\n script_set_attribute(\n attribute:\"description\",\n value:\n\"USN-3977-1 provided mitigations for Microarchitectural Data Sampling\n(MDS) vulnerabilities in Intel Microcode for a large number of Intel\nprocessor families. This update provides the corresponding updated\nmicrocode mitigations for Intel Cherry Trail and Bay Trail processor\nfamilies.\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi\nMaisuradze, Dan Horea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan\nvan Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, Cristiano Giuffrida, Moritz Lipp, Michael\nSchwarz, and Daniel Gruss discovered that memory previously stored in\nmicroarchitectural fill buffers of an Intel CPU core may be exposed to\na malicious process that is executing on the same CPU core. A local\nattacker could use this to expose sensitive information.\n(CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco,\nStephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro\nFrigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered\nthat memory previously stored in microarchitectural load ports of an\nIntel CPU core may be exposed to a malicious process that is executing\non the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin,\nDaniel Moghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel\nGenkin, Daniel Gruss, Berk Sunar, Frank Piessens, and Yuval Yarom\ndiscovered that memory previously stored in microarchitectural store\nbuffers of an Intel CPU core may be exposed to a malicious process\nthat is executing on the same CPU core. A local attacker could use\nthis to expose sensitive information. (CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert\nBos, and Cristiano Giuffrida discovered that uncacheable memory\npreviously stored in microarchitectural buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same\nCPU core. A local attacker could use this to expose sensitive\ninformation. (CVE-2019-11091).\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the Ubuntu security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://usn.ubuntu.com/3977-2/\"\n );\n script_set_attribute(\n attribute:\"solution\",\n value:\"Update the affected intel-microcode package.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:intel-microcode\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:14.04\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:16.04\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:18.04:-:lts\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:18.10\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:19.04\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/22\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/23\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"Ubuntu Security Notice (C) 2019-2020 Canonical, Inc. / NASL script (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Ubuntu Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/cpu\", \"Host/Ubuntu\", \"Host/Ubuntu/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"ubuntu.inc\");\ninclude(\"misc_func.inc\");\n\nif ( ! get_kb_item(\"Host/local_checks_enabled\") ) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/Ubuntu/release\");\nif ( isnull(release) ) audit(AUDIT_OS_NOT, \"Ubuntu\");\nrelease = chomp(release);\nif (! preg(pattern:\"^(14\\.04|16\\.04|18\\.04|18\\.10|19\\.04)$\", string:release)) audit(AUDIT_OS_NOT, \"Ubuntu 14.04 / 16.04 / 18.04 / 18.10 / 19.04\", \"Ubuntu \" + release);\nif ( ! get_kb_item(\"Host/Debian/dpkg-l\") ) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Ubuntu\", cpu);\n\nflag = 0;\n\nif (ubuntu_check(osver:\"16.04\", pkgname:\"intel-microcode\", pkgver:\"3.20190514.0ubuntu0.16.04.2\")) flag++;\nif (ubuntu_check(osver:\"18.04\", pkgname:\"intel-microcode\", pkgver:\"3.20190514.0ubuntu0.18.04.3\")) flag++;\nif (ubuntu_check(osver:\"18.10\", pkgname:\"intel-microcode\", pkgver:\"3.20190514.0ubuntu0.18.10.2\")) flag++;\nif (ubuntu_check(osver:\"19.04\", pkgname:\"intel-microcode\", pkgver:\"3.20190514.0ubuntu0.19.04.3\")) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : ubuntu_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = ubuntu_pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"intel-microcode\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:18:16", "description": "This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the new 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-06-19T00:00:00", "type": "nessus", "title": "SUSE SLED12 / SLES12 Security Update : libvirt (SUSE-SU-2019:1547-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:libvirt", "p-cpe:/a:novell:suse_linux:libvirt-admin", "p-cpe:/a:novell:suse_linux:libvirt-admin-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-client", "p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-hooks", "p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-xen", "p-cpe:/a:novell:suse_linux:libvirt-debugsource", "p-cpe:/a:novell:suse_linux:libvirt-doc", "p-cpe:/a:novell:suse_linux:libvirt-libs", "p-cpe:/a:novell:suse_linux:libvirt-libs-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-nss", "p-cpe:/a:novell:suse_linux:libvirt-nss-debuginfo", "cpe:/o:novell:suse_linux:12"], "id": "SUSE_SU-2019-1547-1.NASL", "href": "https://www.tenable.com/plugins/nessus/126044", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1547-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(126044);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"SUSE SLED12 / SLES12 Security Update : libvirt (SUSE-SU-2019:1547-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n(MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the\nnew 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/show_bug.cgi?id=1135273\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12126/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12127/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12130/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2019-11091/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/support/kb/doc/?id=7023736\");\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191547-1/\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?fa0486ee\");\n script_set_attribute(attribute:\"solution\", value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE Linux Enterprise Software Development Kit 12-SP3:zypper in -t\npatch SUSE-SLE-SDK-12-SP3-2019-1547=1\n\nSUSE Linux Enterprise Server 12-SP3:zypper in -t patch\nSUSE-SLE-SERVER-12-SP3-2019-1547=1\n\nSUSE Linux Enterprise Desktop 12-SP3:zypper in -t patch\nSUSE-SLE-DESKTOP-12-SP3-2019-1547=1\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/06/18\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/06/19\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-admin-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-hooks\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-libs-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-nss-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:12\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED12|SLES12)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED12 / SLES12\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES12\" && (! preg(pattern:\"^(3)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES12 SP3\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED12\" && (! preg(pattern:\"^(3)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED12 SP3\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-xen-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-admin-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-admin-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-client-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-client-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-config-network-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-config-nwfilter-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-interface-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-interface-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-lxc-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-lxc-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-network-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-network-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-nodedev-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-nodedev-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-nwfilter-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-nwfilter-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-qemu-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-qemu-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-secret-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-secret-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-core-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-core-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-disk-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-disk-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-iscsi-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-iscsi-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-logical-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-logical-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-mpath-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-mpath-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-scsi-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-driver-storage-scsi-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-hooks-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-lxc-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-daemon-qemu-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-debugsource-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-doc-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-libs-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-libs-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-lock-sanlock-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-lock-sanlock-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-nss-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", reference:\"libvirt-nss-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-admin-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-admin-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-client-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-client-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-network-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-nwfilter-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-debuginfo-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-lxc-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-qemu-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-xen-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-debugsource-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-doc-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-libs-3.3.0-5.33.2\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-libs-debuginfo-3.3.0-5.33.2\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:19:51", "description": "This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software mitigations.\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes :\n\n---- updated platforms ------------------------------------ SNB-E/EN/EP C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X SNB-E/EN/EP C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-07-22T00:00:00", "type": "nessus", "title": "SUSE SLED15 / SLES15 Security Update : ucode-intel (SUSE-SU-2019:1909-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:ucode-intel", "cpe:/o:novell:suse_linux:15"], "id": "SUSE_SU-2019-1909-1.NASL", "href": "https://www.tenable.com/plugins/nessus/126913", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1909-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(126913);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"SUSE SLED15 / SLES15 Security Update : ucode-intel (SUSE-SU-2019:1909-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release\n(bsc#1111331)\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n(MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software\nmitigations.\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes :\n\n---- updated platforms ------------------------------------\nSNB-E/EN/EP C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X\nSNB-E/EN/EP C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12126/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12127/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12130/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2019-11091/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/support/kb/doc/?id=7023736\");\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191909-1/\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?8b737515\");\n script_set_attribute(attribute:\"solution\", value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE Linux Enterprise Module for Basesystem 15:zypper in -t patch\nSUSE-SLE-Module-Basesystem-15-2019-1909=1\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/19\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/07/22\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:15\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED15|SLES15)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED15 / SLES15\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\nif (cpu >!< \"x86_64\") audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES15\" && (! preg(pattern:\"^(0)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES15 SP0\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED15\" && (! preg(pattern:\"^(0)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED15 SP0\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES15\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-20190618-3.22.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-20190618-3.22.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:20:59", "description": "This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software mitigations.\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes :\n\n---- updated platforms ------------------------------------ SNB-E/EN/EP C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X SNB-E/EN/EP C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\n---- new platforms ---------------------------------------- VLV C0 6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron N2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0 6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X series Readded what missing in last update: BDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core i7-69xx/68xx\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-07-22T00:00:00", "type": "nessus", "title": "SUSE SLED15 / SLES15 Security Update : ucode-intel (SUSE-SU-2019:1910-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:ucode-intel", "cpe:/o:novell:suse_linux:15"], "id": "SUSE_SU-2019-1910-1.NASL", "href": "https://www.tenable.com/plugins/nessus/126914", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1910-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(126914);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"SUSE SLED15 / SLES15 Security Update : ucode-intel (SUSE-SU-2019:1910-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release\n(bsc#1111331)\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n(MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software\nmitigations.\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes :\n\n---- updated platforms ------------------------------------\nSNB-E/EN/EP C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X\nSNB-E/EN/EP C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\n---- new platforms ---------------------------------------- VLV C0\n6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron\nN2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0\n6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X\nseries Readded what missing in last update: BDX-ML B0/M0/R0 6-4f-1/ef\n0b00002e->00000036 Xeon E5/E7 v4; Core i7-69xx/68xx\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12126/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12127/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12130/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2019-11091/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/support/kb/doc/?id=7023736\");\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191910-1/\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?c6c5ffa3\");\n script_set_attribute(attribute:\"solution\", value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE Linux Enterprise Module for Basesystem 15-SP1:zypper in -t patch\nSUSE-SLE-Module-Basesystem-15-SP1-2019-1910=1\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/19\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/07/22\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:15\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED15|SLES15)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED15 / SLES15\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\nif (cpu >!< \"x86_64\") audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES15\" && (! preg(pattern:\"^(1)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES15 SP1\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED15\" && (! preg(pattern:\"^(1)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED15 SP1\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES15\", sp:\"1\", cpu:\"x86_64\", reference:\"ucode-intel-20190618-3.3.1\")) flag++;\nif (rpm_check(release:\"SLED15\", sp:\"1\", cpu:\"x86_64\", reference:\"ucode-intel-20190618-3.3.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:20:33", "description": "This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software mitigations.\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes :\n\n---- updated platforms ------------------------------------ SNB-E/EN/EP C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X SNB-E/EN/EP C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-07-24T00:00:00", "type": "nessus", "title": "SUSE SLED12 / SLES12 Security Update : ucode-intel (SUSE-SU-2019:1954-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:ucode-intel", "p-cpe:/a:novell:suse_linux:ucode-intel-debuginfo", "p-cpe:/a:novell:suse_linux:ucode-intel-debugsource", "cpe:/o:novell:suse_linux:12"], "id": "SUSE_SU-2019-1954-1.NASL", "href": "https://www.tenable.com/plugins/nessus/126984", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1954-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(126984);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"SUSE SLED12 / SLES12 Security Update : ucode-intel (SUSE-SU-2019:1954-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"This update for ucode-intel fixes the following issues :\n\nThis update contains the Intel QSR 2019.1 Microcode release\n(bsc#1111331)\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n(MDSUM)\n\nThese updates contain the CPU Microcode adjustments for the software\nmitigations.\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nRelease notes :\n\n---- updated platforms ------------------------------------\nSNB-E/EN/EP C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X\nSNB-E/EN/EP C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12126/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12127/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12130/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2019-11091/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/support/kb/doc/?id=7023736\");\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191954-1/\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?ce08396e\");\n script_set_attribute(attribute:\"solution\", value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE OpenStack Cloud Crowbar 8:zypper in -t patch\nSUSE-OpenStack-Cloud-Crowbar-8-2019-1954=1\n\nSUSE OpenStack Cloud 8:zypper in -t patch\nSUSE-OpenStack-Cloud-8-2019-1954=1\n\nSUSE OpenStack Cloud 7:zypper in -t patch\nSUSE-OpenStack-Cloud-7-2019-1954=1\n\nSUSE Linux Enterprise Server for SAP 12-SP3:zypper in -t patch\nSUSE-SLE-SAP-12-SP3-2019-1954=1\n\nSUSE Linux Enterprise Server for SAP 12-SP2:zypper in -t patch\nSUSE-SLE-SAP-12-SP2-2019-1954=1\n\nSUSE Linux Enterprise Server for SAP 12-SP1:zypper in -t patch\nSUSE-SLE-SAP-12-SP1-2019-1954=1\n\nSUSE Linux Enterprise Server 12-SP5:zypper in -t patch\nSUSE-SLE-SERVER-12-SP5-2019-1954=1\n\nSUSE Linux Enterprise Server 12-SP4:zypper in -t patch\nSUSE-SLE-SERVER-12-SP4-2019-1954=1\n\nSUSE Linux Enterprise Server 12-SP3-LTSS:zypper in -t patch\nSUSE-SLE-SERVER-12-SP3-2019-1954=1\n\nSUSE Linux Enterprise Server 12-SP3-BCL:zypper in -t patch\nSUSE-SLE-SERVER-12-SP3-BCL-2019-1954=1\n\nSUSE Linux Enterprise Server 12-SP2-LTSS:zypper in -t patch\nSUSE-SLE-SERVER-12-SP2-2019-1954=1\n\nSUSE Linux Enterprise Server 12-SP2-BCL:zypper in -t patch\nSUSE-SLE-SERVER-12-SP2-BCL-2019-1954=1\n\nSUSE Linux Enterprise Server 12-SP1-LTSS:zypper in -t patch\nSUSE-SLE-SERVER-12-SP1-2019-1954=1\n\nSUSE Linux Enterprise Desktop 12-SP5:zypper in -t patch\nSUSE-SLE-DESKTOP-12-SP5-2019-1954=1\n\nSUSE Linux Enterprise Desktop 12-SP4:zypper in -t patch\nSUSE-SLE-DESKTOP-12-SP4-2019-1954=1\n\nSUSE Enterprise Storage 5:zypper in -t patch\nSUSE-Storage-5-2019-1954=1\n\nSUSE Enterprise Storage 4:zypper in -t patch\nSUSE-Storage-4-2019-1954=1\n\nSUSE CaaS Platform 3.0 :\n\nTo install this update, use the SUSE CaaS Platform Velum dashboard. It\nwill inform you if it detects new updates and let you then trigger\nupdating of the complete cluster in a controlled way.\n\nHPE Helion Openstack 8:zypper in -t patch\nHPE-Helion-OpenStack-8-2019-1954=1\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/23\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/07/24\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:12\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED12|SLES12)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED12 / SLES12\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\nif (cpu >!< \"x86_64\") audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES12\" && (! preg(pattern:\"^(1|2|3|4|5)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES12 SP1/2/3/4/5\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED12\" && (! preg(pattern:\"^(4|5)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED12 SP4/5\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"ucode-intel-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"2\", cpu:\"x86_64\", reference:\"ucode-intel-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"2\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"2\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"5\", cpu:\"x86_64\", reference:\"ucode-intel-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"5\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"5\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"5\", cpu:\"x86_64\", reference:\"ucode-intel-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"5\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190618-13.47.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"5\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190618-13.47.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nBug Fix(es) :\n\n - aio O_DIRECT writes to non-page-aligned file locations on ext4 can result in the overlapped portion of the page containing zeros\n\n - Tolerate new s390x crypto hardware for migration", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : kernel on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:kernel", "p-cpe:/a:fermilab:scientific_linux:kernel-abi-whitelists", "p-cpe:/a:fermilab:scientific_linux:kernel-debug", "p-cpe:/a:fermilab:scientific_linux:kernel-debug-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-debug-devel", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-i686", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:fermilab:scientific_linux:kernel-devel", "p-cpe:/a:fermilab:scientific_linux:kernel-doc", "p-cpe:/a:fermilab:scientific_linux:kernel-firmware", "p-cpe:/a:fermilab:scientific_linux:kernel-headers", "p-cpe:/a:fermilab:scientific_linux:perf", "p-cpe:/a:fermilab:scientific_linux:perf-debuginfo", "p-cpe:/a:fermilab:scientific_linux:python-perf", "p-cpe:/a:fermilab:scientific_linux:python-perf-debuginfo", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_KERNEL_ON_SL6_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125202", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125202);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : kernel on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\n\nBug Fix(es) :\n\n - aio O_DIRECT writes to non-page-aligned file locations\n on ext4 can result in the overlapped portion of the page\n containing zeros\n\n - Tolerate new s390x crypto hardware for migration\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=3706\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?e9696bb0\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-i686\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-firmware\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 6.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL6\", reference:\"kernel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-abi-whitelists-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-debug-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-debug-debuginfo-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-debug-devel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-debuginfo-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-debuginfo-common-i686-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-devel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-doc-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-firmware-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-headers-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"perf-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"python-perf-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"python-perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:12", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : libvirt on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:libvirt", "p-cpe:/a:fermilab:scientific_linux:libvirt-admin", "p-cpe:/a:fermilab:scientific_linux:libvirt-bash-completion", "p-cpe:/a:fermilab:scientific_linux:libvirt-client", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-config-network", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-interface", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-network", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-secret", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-core", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-disk", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-gluster", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-logical", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-kvm", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-lxc", "p-cpe:/a:fermilab:scientific_linux:libvirt-debuginfo", "p-cpe:/a:fermilab:scientific_linux:libvirt-devel", "p-cpe:/a:fermilab:scientific_linux:libvirt-docs", "p-cpe:/a:fermilab:scientific_linux:libvirt-libs", "p-cpe:/a:fermilab:scientific_linux:libvirt-lock-sanlock", "p-cpe:/a:fermilab:scientific_linux:libvirt-login-shell", "p-cpe:/a:fermilab:scientific_linux:libvirt-nss", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_LIBVIRT_ON_SL7_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125205", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125205);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : libvirt on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=2574\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?9751c9a1\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-bash-completion\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-gluster\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-docs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-login-shell\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 7.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-admin-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-bash-completion-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-client-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-network-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-nwfilter-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-gluster-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-kvm-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-lxc-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-debuginfo-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-devel-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-docs-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-libs-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-login-shell-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-nss-4.5.0-10.el7_6.9\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-admin / libvirt-bash-completion / libvirt-client / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:33", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : libvirt on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:libvirt", "p-cpe:/a:fermilab:scientific_linux:libvirt-client", "p-cpe:/a:fermilab:scientific_linux:libvirt-debuginfo", "p-cpe:/a:fermilab:scientific_linux:libvirt-devel", "p-cpe:/a:fermilab:scientific_linux:libvirt-lock-sanlock", "p-cpe:/a:fermilab:scientific_linux:libvirt-python", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_LIBVIRT_ON_SL6_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125204", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125204);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : libvirt on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=4100\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?e0b388fd\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-python\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 6.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL6\", reference:\"libvirt-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"libvirt-client-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"libvirt-debuginfo-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"libvirt-devel-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"SL6\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"libvirt-python-0.10.2-64.el6_10.1\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-client / libvirt-debuginfo / libvirt-devel / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:12", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : kernel on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:bpftool", "p-cpe:/a:fermilab:scientific_linux:kernel", "p-cpe:/a:fermilab:scientific_linux:kernel-abi-whitelists", "p-cpe:/a:fermilab:scientific_linux:kernel-debug", "p-cpe:/a:fermilab:scientific_linux:kernel-debug-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-debug-devel", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:fermilab:scientific_linux:kernel-devel", "p-cpe:/a:fermilab:scientific_linux:kernel-doc", "p-cpe:/a:fermilab:scientific_linux:kernel-headers", "p-cpe:/a:fermilab:scientific_linux:kernel-tools", "p-cpe:/a:fermilab:scientific_linux:kernel-tools-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs", "p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs-devel", "p-cpe:/a:fermilab:scientific_linux:perf", "p-cpe:/a:fermilab:scientific_linux:perf-debuginfo", "p-cpe:/a:fermilab:scientific_linux:python-perf", "p-cpe:/a:fermilab:scientific_linux:python-perf-debuginfo", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_KERNEL_ON_SL7_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125203", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125203);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : kernel on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=3330\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?248977b9\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:bpftool\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 7.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"bpftool-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", reference:\"kernel-abi-whitelists-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debug-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debug-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", reference:\"kernel-doc-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-headers-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"perf-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"perf-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"python-perf-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"bpftool / kernel / kernel-abi-whitelists / kernel-debug / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:23", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : qemu-kvm on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:qemu-guest-agent", "p-cpe:/a:fermilab:scientific_linux:qemu-img", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm-debuginfo", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm-tools", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_QEMU_KVM_ON_SL6_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125206", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125206);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : qemu-kvm on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=4483\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?9b2a45c5\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 6.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL6\", reference:\"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"SL6\", cpu:\"x86_64\", reference:\"qemu-img-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"SL6\", cpu:\"x86_64\", reference:\"qemu-kvm-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"qemu-kvm-debuginfo-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"SL6\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-0.12.1.2-2.506.el6_10.3\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-guest-agent / qemu-img / qemu-kvm / qemu-kvm-debuginfo / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:36", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : qemu-kvm on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:qemu-img", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm-common", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm-debuginfo", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm-tools", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_QEMU_KVM_ON_SL7_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125207", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125207);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : qemu-kvm on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=2951\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?4873cf7e\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 7.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-160.el7_6.2\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T14:51:14", "description": "The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in the SUSE-SU-2019:14048-1 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2021-06-10T00:00:00", "type": "nessus", "title": "SUSE SLES11 Security Update : microcode_ctl (SUSE-SU-2019:14048-1)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:microcode_ctl", "cpe:/o:novell:suse_linux:11"], "id": "SUSE_SU-2019-14048-1.NASL", "href": "https://www.tenable.com/plugins/nessus/150546", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The package checks in this plugin were extracted from\n# SUSE update advisory SUSE-SU-2019:14048-1. The text itself\n# is copyright (C) SUSE.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(150546);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"SuSE\", value:\"SUSE-SU-2019:14048-1\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"SUSE SLES11 Security Update : microcode_ctl (SUSE-SU-2019:14048-1)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in\nthe SUSE-SU-2019:14048-1 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1111331\");\n # https://lists.suse.com/pipermail/sle-security-updates/2019-May/005455.html\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?ddc44404\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12126\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12127\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12130\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2019-11091\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected microcode_ctl package.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2021/06/10\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:microcode_ctl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:11\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2021-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('misc_func.inc');\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'SUSE');\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLES11)$\", string:os_ver)) audit(AUDIT_OS_NOT, 'SUSE SLES11', 'SUSE ' + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'SUSE ' + os_ver, cpu);\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES11\" && (! preg(pattern:\"^(4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES11 SP4\", os_ver + \" SP\" + sp);\n\npkgs = [\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'i586', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'i586', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'}\n];\n\nflag = 0;\nforeach package_array ( pkgs ) {\n reference = NULL;\n release = NULL;\n sp = NULL;\n cpu = NULL;\n exists_check = NULL;\n rpm_spec_vers_cmp = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (reference && release && exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n else if (reference && release) {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n}\n\nif (flag)\n{\n ltss_plugin_caveat = '\\n' +\n 'NOTE: This vulnerability check contains fixes that apply to\\n' +\n 'packages only available in SUSE Enterprise Linux Server LTSS\\n' +\n 'repositories. Access to these package security updates require\\n' +\n 'a paid SUSE LTSS subscription.\\n';\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + ltss_plugin_caveat\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'microcode_ctl');\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T14:50:06", "description": "The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in the SUSE-SU-2019:14133-1 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2021-06-10T00:00:00", "type": "nessus", "title": "SUSE SLES11 Security Update : microcode_ctl (SUSE-SU-2019:14133-1)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:microcode_ctl", "cpe:/o:novell:suse_linux:11"], "id": "SUSE_SU-2019-14133-1.NASL", "href": "https://www.tenable.com/plugins/nessus/150530", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The package checks in this plugin were extracted from\n# SUSE update advisory SUSE-SU-2019:14133-1. The text itself\n# is copyright (C) SUSE.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(150530);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"SuSE\", value:\"SUSE-SU-2019:14133-1\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"SUSE SLES11 Security Update : microcode_ctl (SUSE-SU-2019:14133-1)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in\nthe SUSE-SU-2019:14133-1 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1111331\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1141977\");\n # https://lists.suse.com/pipermail/sle-security-updates/2019-July/005743.html\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?a4918484\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12126\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12127\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12130\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2019-11091\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected microcode_ctl package.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/23\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2021/06/10\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:microcode_ctl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:11\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2021-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('misc_func.inc');\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'SUSE');\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLES11)$\", string:os_ver)) audit(AUDIT_OS_NOT, 'SUSE SLES11', 'SUSE ' + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'SUSE ' + os_ver, cpu);\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES11\" && (! preg(pattern:\"^(4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES11 SP4\", os_ver + \" SP\" + sp);\n\npkgs = [\n {'reference':'microcode_ctl-1.17-102.83.41', 'sp':'4', 'cpu':'i586', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.41', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.41', 'sp':'4', 'cpu':'i586', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.41', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'}\n];\n\nflag = 0;\nforeach package_array ( pkgs ) {\n reference = NULL;\n release = NULL;\n sp = NULL;\n cpu = NULL;\n exists_check = NULL;\n rpm_spec_vers_cmp = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (reference && release && exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n else if (reference && release) {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n}\n\nif (flag)\n{\n ltss_plugin_caveat = '\\n' +\n 'NOTE: This vulnerability check contains fixes that apply to\\n' +\n 'packages only available in SUSE Enterprise Linux Server LTSS\\n' +\n 'repositories. Access to these package security updates require\\n' +\n 'a paid SUSE LTSS subscription.\\n';\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + ltss_plugin_caveat\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'microcode_ctl');\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:33", "description": "Multiple researchers have discovered vulnerabilities in the way the Intel processor designs have implemented speculative forwarding of data filled into temporary microarchitectural structures (buffers).\nThis flaw could allow an attacker controlling an unprivileged process to read sensitive information, including from the kernel and all other processes running on the system or cross guest/host boundaries to read host memory.\n\nSee https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.\n\nTo fully resolve these vulnerabilities it is also necessary to install updated CPU microcode. An updated intel-microcode package (only available in Debian non-free) will be provided via a separate DLA. The updated CPU microcode may also be available as part of a system firmware ('BIOS') update.\n\nIn addition, this update includes a fix for a regression causing deadlocks inside the loopback driver, which was introduced by the update to 4.9.168 in the last security update.\n\nFor Debian 8 'Jessie', these problems have been fixed in version 4.9.168-1+deb9u2~deb8u1.\n\nWe recommend that you upgrade your linux-4.9 packages.\n\nNOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Debian DLA-1787-1 : linux-4.9 security update (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-11T00:00:00", "cpe": ["p-cpe:/a:debian:debian_linux:linux-compiler-gcc-4.9-arm", "p-cpe:/a:debian:debian_linux:linux-doc-4.9", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-686", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-686-pae", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-all", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-all-amd64", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-all-armel", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-all-armhf", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-all-i386", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-amd64", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-armmp", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-armmp-lpae", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-common", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-common-rt", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-marvell", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-rt-686-pae", "p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-rt-amd64", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-686", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-686-pae", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-686-pae-dbg", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-amd64", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-amd64-dbg", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-armmp", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-armmp-lpae", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-marvell", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-rt-686-pae", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-rt-686-pae-dbg", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-rt-amd64", "p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-rt-amd64-dbg", "p-cpe:/a:debian:debian_linux:linux-kbuild-4.9", "p-cpe:/a:debian:debian_linux:linux-manual-4.9", "p-cpe:/a:debian:debian_linux:linux-perf-4.9", "p-cpe:/a:debian:debian_linux:linux-source-4.9", "p-cpe:/a:debian:debian_linux:linux-support-4.9.0-0.bpo.7", "cpe:/o:debian:debian_linux:8.0"], "id": "DEBIAN_DLA-1787.NASL", "href": "https://www.tenable.com/plugins/nessus/125173", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Debian Security Advisory DLA-1787-1. The text\n# itself is copyright (C) Software in the Public Interest, Inc.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125173);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/11\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Debian DLA-1787-1 : linux-4.9 security update (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks dpkg output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Debian host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Multiple researchers have discovered vulnerabilities in the way the\nIntel processor designs have implemented speculative forwarding of\ndata filled into temporary microarchitectural structures (buffers).\nThis flaw could allow an attacker controlling an unprivileged process\nto read sensitive information, including from the kernel and all other\nprocesses running on the system or cross guest/host boundaries to read\nhost memory.\n\nSee\nhttps://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html\nfor more details.\n\nTo fully resolve these vulnerabilities it is also necessary to install\nupdated CPU microcode. An updated intel-microcode package (only\navailable in Debian non-free) will be provided via a separate DLA. The\nupdated CPU microcode may also be available as part of a system\nfirmware ('BIOS') update.\n\nIn addition, this update includes a fix for a regression causing\ndeadlocks inside the loopback driver, which was introduced by the\nupdate to 4.9.168 in the last security update.\n\nFor Debian 8 'Jessie', these problems have been fixed in version\n4.9.168-1+deb9u2~deb8u1.\n\nWe recommend that you upgrade your linux-4.9 packages.\n\nNOTE: Tenable Network Security has extracted the preceding description\nblock directly from the DLA security advisory. Tenable has attempted\nto automatically clean and format it as much as possible without\nintroducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://lists.debian.org/debian-lts-announce/2019/05/msg00017.html\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://packages.debian.org/source/jessie/linux-4.9\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Upgrade the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-compiler-gcc-4.9-arm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-doc-4.9\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-686\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-686-pae\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-all\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-all-amd64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-all-armel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-all-armhf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-all-i386\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-amd64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-armmp\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-armmp-lpae\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-common-rt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-marvell\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-rt-686-pae\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-headers-4.9.0-0.bpo.7-rt-amd64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-686\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-686-pae\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-686-pae-dbg\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-amd64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-amd64-dbg\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-armmp\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-armmp-lpae\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-marvell\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-rt-686-pae\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-rt-686-pae-dbg\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-rt-amd64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-image-4.9.0-0.bpo.7-rt-amd64-dbg\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-kbuild-4.9\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-manual-4.9\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-perf-4.9\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-source-4.9\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:linux-support-4.9.0-0.bpo.7\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:debian:debian_linux:8.0\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Debian Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Debian/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"debian_package.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/Debian/release\")) audit(AUDIT_OS_NOT, \"Debian\");\nif (!get_kb_item(\"Host/Debian/dpkg-l\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\nflag = 0;\nif (deb_check(release:\"8.0\", prefix:\"linux-compiler-gcc-4.9-arm\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-doc-4.9\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-686\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-686-pae\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-all\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-all-amd64\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-all-armel\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-all-armhf\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-all-i386\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-amd64\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-armmp\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-armmp-lpae\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-common\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-common-rt\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-marvell\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-rt-686-pae\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-headers-4.9.0-0.bpo.7-rt-amd64\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-686\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-686-pae\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-686-pae-dbg\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-amd64\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-amd64-dbg\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-armmp\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-armmp-lpae\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-marvell\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-rt-686-pae\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-rt-686-pae-dbg\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-rt-amd64\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-image-4.9.0-0.bpo.7-rt-amd64-dbg\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-kbuild-4.9\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-manual-4.9\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-perf-4.9\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-source-4.9\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\nif (deb_check(release:\"8.0\", prefix:\"linux-support-4.9.0-0.bpo.7\", reference:\"4.9.168-1+deb9u2~deb8u1\")) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:deb_report_get());\n else security_warning(0);\n exit(0);\n}\nelse audit(AUDIT_HOST_NOT, \"affected\");\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:25", "description": "DLA-1789-1 shipped updated CPU microcode for most types of Intel CPUs as mitigations for the MSBDS, MFBDS, MLPDS and MDSUM hardware vulnerabilities.\n\nThis update provides additional support for some Sandybridge server and Core-X CPUs which were not covered in the original May microcode release. For a list of specific CPU models now supported please refer to the entries listed under CPUID 206D6 and 206D7 at https://www.intel.com/content/dam/www/public/us/en/documents/corporate\n-information/SA00233-microcode-update-guidance_05132019.pdf\n\nFor Debian 8 'Jessie', these problems have been fixed in version 3.20190618.1~deb8u1 of the intel-microcode package.\n\nWe recommend that you upgrade your intel-microcode packages.\n\nNOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Debian DLA-1789-2 : intel-microcode security update (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-11T00:00:00", "cpe": ["p-cpe:/a:debian:debian_linux:intel-microcode", "cpe:/o:debian:debian_linux:8.0"], "id": "DEBIAN_DLA-1789.NASL", "href": "https://www.tenable.com/plugins/nessus/125175", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Debian Security Advisory DLA-1789-2. The text\n# itself is copyright (C) Software in the Public Interest, Inc.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125175);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/11\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Debian DLA-1789-2 : intel-microcode security update (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks dpkg output for the updated package.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Debian host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"DLA-1789-1 shipped updated CPU microcode for most types of Intel CPUs\nas mitigations for the MSBDS, MFBDS, MLPDS and MDSUM hardware\nvulnerabilities.\n\nThis update provides additional support for some Sandybridge server\nand Core-X CPUs which were not covered in the original May microcode\nrelease. For a list of specific CPU models now supported please refer\nto the entries listed under CPUID 206D6 and 206D7 at\nhttps://www.intel.com/content/dam/www/public/us/en/documents/corporate\n-information/SA00233-microcode-update-guidance_05132019.pdf\n\nFor Debian 8 'Jessie', these problems have been fixed in version\n3.20190618.1~deb8u1 of the intel-microcode package.\n\nWe recommend that you upgrade your intel-microcode packages.\n\nNOTE: Tenable Network Security has extracted the preceding description\nblock directly from the DLA security advisory. Tenable has attempted\nto automatically clean and format it as much as possible without\nintroducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://lists.debian.org/debian-lts-announce/2019/06/msg00018.html\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://packages.debian.org/source/jessie/intel-microcode\"\n );\n # https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-update-guidance_05132019.pdf\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?100fa039\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Upgrade the affected intel-microcode package.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:intel-microcode\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:debian:debian_linux:8.0\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/06/20\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Debian Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Debian/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"debian_package.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/Debian/release\")) audit(AUDIT_OS_NOT, \"Debian\");\nif (!get_kb_item(\"Host/Debian/dpkg-l\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\nflag = 0;\nif (deb_check(release:\"8.0\", prefix:\"intel-microcode\", reference:\"3.20190618~deb8u1\")) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:deb_report_get());\n else security_warning(0);\n exit(0);\n}\nelse audit(AUDIT_HOST_NOT, \"affected\");\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:24", "description": "This update for ucode-intel fixes the following issues :\n\nThe Intel CPU Microcode was updated to the official QSR 2019.1 Microcode release (bsc#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127 CVE-2019-11091)\n\n---- new platforms ---------------------------------------- VLV C0 6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron N2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0 6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X series\n\nReadded missing in last update :\n\nBDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core i7-69xx/68xx\n\nThis update was imported from the SUSE:SLE-15:Update update project.", "cvss3": {}, "published": "2019-05-29T00:00:00", "type": "nessus", "title": "openSUSE Security Update : ucode-intel (openSUSE-2019-1468) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-19T00:00:00", "cpe": ["p-cpe:/a:novell:opensuse:ucode-intel", "cpe:/o:novell:opensuse:15.0"], "id": "OPENSUSE-2019-1468.NASL", "href": "https://www.tenable.com/plugins/nessus/125534", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from openSUSE Security Update openSUSE-2019-1468.\n#\n# The text description of this plugin is (C) SUSE LLC.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125534);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/19\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"openSUSE Security Update : ucode-intel (openSUSE-2019-1468) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Check for the openSUSE-2019-1468 patch\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote openSUSE host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"This update for ucode-intel fixes the following issues :\n\nThe Intel CPU Microcode was updated to the official QSR 2019.1\nMicrocode release (bsc#1111331 CVE-2018-12126 CVE-2018-12130\nCVE-2018-12127 CVE-2019-11091)\n\n---- new platforms ---------------------------------------- VLV C0\n6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron\nN2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0\n6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X\nseries\n\nReadded missing in last update :\n\nBDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core\ni7-69xx/68xx\n\nThis update was imported from the SUSE:SLE-15:Update update project.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected ucode-intel package.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:opensuse:15.0\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/28\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/29\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release =~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"openSUSE\");\nif (release !~ \"^(SUSE15\\.0)$\") audit(AUDIT_OS_RELEASE_NOT, \"openSUSE\", \"15.0\", release);\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nourarch = get_kb_item(\"Host/cpu\");\nif (!ourarch) audit(AUDIT_UNKNOWN_ARCH);\nif (ourarch !~ \"^(x86_64)$\") audit(AUDIT_ARCH_NOT, \"x86_64\", ourarch);\n\nflag = 0;\n\nif ( rpm_check(release:\"SUSE15.0\", reference:\"ucode-intel-20190514-lp150.2.21.1\") ) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:24", "description": "This update for xen fixes the following issues :\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the XEN Hypervisor adjustments, that additionaly also use CPU Microcode updates.\n\nThe mitigation can be controlled via the 'mds' commandline option, see the documentation.\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nOther fixes :\n\n - Added code to change LIBXL_HOTPLUG_TIMEOUT at runtime.\n\n The included README has details about the impact of this change (bsc#1120095)\n\n - Fixes in Live migrating PV domUs\n\n An earlier change broke live migration of PV domUs without a device model. The migration would stall for 10 seconds while the domU was paused, which caused network connections to drop. Fix this by tracking the need for a device model within libxl. (bsc#1079730, bsc#1098403, bsc#1111025)\n\n - Libvirt segfault when crash triggered on top of HVM guest (bsc#1120067)\n\nThis update was imported from the SUSE:SLE-15:Update update project.", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "nessus", "title": "openSUSE Security Update : xen (openSUSE-2019-1403) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-19T00:00:00", "cpe": ["p-cpe:/a:novell:opensuse:xen", "p-cpe:/a:novell:opensuse:xen-debugsource", "p-cpe:/a:novell:opensuse:xen-devel", "p-cpe:/a:novell:opensuse:xen-doc-html", "p-cpe:/a:novell:opensuse:xen-libs", "p-cpe:/a:novell:opensuse:xen-libs-32bit", "p-cpe:/a:novell:opensuse:xen-libs-32bit-debuginfo", "p-cpe:/a:novell:opensuse:xen-libs-debuginfo", "p-cpe:/a:novell:opensuse:xen-tools", "p-cpe:/a:novell:opensuse:xen-tools-debuginfo", "p-cpe:/a:novell:opensuse:xen-tools-domU", "p-cpe:/a:novell:opensuse:xen-tools-domU-debuginfo", "cpe:/o:novell:opensuse:15.0"], "id": "OPENSUSE-2019-1403.NASL", "href": "https://www.tenable.com/plugins/nessus/125242", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from openSUSE Security Update openSUSE-2019-1403.\n#\n# The text description of this plugin is (C) SUSE LLC.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125242);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/19\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"openSUSE Security Update : xen (openSUSE-2019-1403) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Check for the openSUSE-2019-1403 patch\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote openSUSE host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"This update for xen fixes the following issues :\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data\n Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data\n Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data\n Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling\n Uncacheable Memory (MDSUM)\n\nThese updates contain the XEN Hypervisor adjustments, that additionaly\nalso use CPU Microcode updates.\n\nThe mitigation can be controlled via the 'mds' commandline option, see\nthe documentation.\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nOther fixes :\n\n - Added code to change LIBXL_HOTPLUG_TIMEOUT at runtime.\n\n The included README has details about the impact of this\n change (bsc#1120095)\n\n - Fixes in Live migrating PV domUs\n\n An earlier change broke live migration of PV domUs\n without a device model. The migration would stall for 10\n seconds while the domU was paused, which caused network\n connections to drop. Fix this by tracking the need for a\n device model within libxl. (bsc#1079730, bsc#1098403,\n bsc#1111025)\n\n - Libvirt segfault when crash triggered on top of HVM\n guest (bsc#1120067)\n\nThis update was imported from the SUSE:SLE-15:Update update project.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1027519\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1079730\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1098403\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111025\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1120067\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1120095\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/support/kb/doc/?id=7023736\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected xen packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-doc-html\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-libs-32bit\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-libs-32bit-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-libs-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-tools-domU\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-tools-domU-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:opensuse:15.0\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/17\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release =~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"openSUSE\");\nif (release !~ \"^(SUSE15\\.0)$\") audit(AUDIT_OS_RELEASE_NOT, \"openSUSE\", \"15.0\", release);\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nourarch = get_kb_item(\"Host/cpu\");\nif (!ourarch) audit(AUDIT_UNKNOWN_ARCH);\nif (ourarch !~ \"^(i586|i686|x86_64)$\") audit(AUDIT_ARCH_NOT, \"i586 / i686 / x86_64\", ourarch);\n\nflag = 0;\n\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-debugsource-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-devel-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-libs-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-libs-debuginfo-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-tools-domU-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-tools-domU-debuginfo-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-doc-html-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-libs-32bit-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-libs-32bit-debuginfo-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-tools-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-tools-debuginfo-4.10.3_04-lp150.2.19.1\") ) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"xen / xen-debugsource / xen-devel / xen-doc-html / xen-libs / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:54", "description": "This update for qemu fixes the following issues :\n\n - CVE-2018-12126 CVE-2018-12127 CVE-2018-12130 CVE-2019-11091: Added x86 cpu feature 'md-clear' (bsc#1111331)\n\nThis update was imported from the SUSE:SLE-12-SP3:Update update project.", "cvss3": {}, "published": "2019-05-21T00:00:00", "type": "nessus", "title": "openSUSE Security Update : qemu (openSUSE-2019-1420) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-19T00:00:00", "cpe": ["p-cpe:/a:novell:opensuse:qemu", "p-cpe:/a:novell:opensuse:qemu-arm", "p-cpe:/a:novell:opensuse:qemu-arm-debuginfo", "p-cpe:/a:novell:opensuse:qemu-block-curl", "p-cpe:/a:novell:opensuse:qemu-block-curl-debuginfo", "p-cpe:/a:novell:opensuse:qemu-block-dmg", "p-cpe:/a:novell:opensuse:qemu-block-dmg-debuginfo", "p-cpe:/a:novell:opensuse:qemu-block-iscsi", "p-cpe:/a:novell:opensuse:qemu-block-iscsi-debuginfo", "p-cpe:/a:novell:opensuse:qemu-block-rbd", "p-cpe:/a:novell:opensuse:qemu-block-rbd-debuginfo", "p-cpe:/a:novell:opensuse:qemu-block-ssh", "p-cpe:/a:novell:opensuse:qemu-block-ssh-debuginfo", "p-cpe:/a:novell:opensuse:qemu-debugsource", "p-cpe:/a:novell:opensuse:qemu-extra", "p-cpe:/a:novell:opensuse:qemu-extra-debuginfo", "p-cpe:/a:novell:opensuse:qemu-guest-agent", "p-cpe:/a:novell:opensuse:qemu-guest-agent-debuginfo", "p-cpe:/a:novell:opensuse:qemu-ipxe", "p-cpe:/a:novell:opensuse:qemu-ksm", "p-cpe:/a:novell:opensuse:qemu-kvm", "p-cpe:/a:novell:opensuse:qemu-lang", "p-cpe:/a:novell:opensuse:qemu-linux-user", "p-cpe:/a:novell:opensuse:qemu-linux-user-debuginfo", "p-cpe:/a:novell:opensuse:qemu-linux-user-debugsource", "p-cpe:/a:novell:opensuse:qemu-ppc", "p-cpe:/a:novell:opensuse:qemu-ppc-debuginfo", "p-cpe:/a:novell:opensuse:qemu-s390", "p-cpe:/a:novell:opensuse:qemu-s390-debuginfo", "p-cpe:/a:novell:opensuse:qemu-seabios", "p-cpe:/a:novell:opensuse:qemu-sgabios", "p-cpe:/a:novell:opensuse:qemu-testsuite", "p-cpe:/a:novell:opensuse:qemu-tools", "p-cpe:/a:novell:opensuse:qemu-tools-debuginfo", "p-cpe:/a:novell:opensuse:qemu-vgabios", "p-cpe:/a:novell:opensuse:qemu-x86", "p-cpe:/a:novell:opensuse:qemu-x86-debuginfo", "cpe:/o:novell:opensuse:42.3"], "id": "OPENSUSE-2019-1420.NASL", "href": "https://www.tenable.com/plugins/nessus/125306", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from openSUSE Security Update openSUSE-2019-1420.\n#\n# The text description of this plugin is (C) SUSE LLC.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125306);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/19\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"openSUSE Security Update : qemu (openSUSE-2019-1420) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Check for the openSUSE-2019-1420 patch\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote openSUSE host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"This update for qemu fixes the following issues :\n\n - CVE-2018-12126 CVE-2018-12127 CVE-2018-12130\n CVE-2019-11091: Added x86 cpu feature 'md-clear'\n (bsc#1111331)\n\nThis update was imported from the SUSE:SLE-12-SP3:Update update\nproject.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected qemu packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-arm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-arm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-curl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-dmg\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-dmg-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-iscsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-rbd-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-ssh\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-ssh-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-extra-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-guest-agent-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-ipxe\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-ksm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-lang\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-linux-user\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-linux-user-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-linux-user-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-ppc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-ppc-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-s390\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-s390-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-seabios\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-sgabios\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-testsuite\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-vgabios\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-x86\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-x86-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:opensuse:42.3\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/20\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/21\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release =~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"openSUSE\");\nif (release !~ \"^(SUSE42\\.3)$\") audit(AUDIT_OS_RELEASE_NOT, \"openSUSE\", \"42.3\", release);\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nourarch = get_kb_item(\"Host/cpu\");\nif (!ourarch) audit(AUDIT_UNKNOWN_ARCH);\nif (ourarch !~ \"^(i586|i686|x86_64)$\") audit(AUDIT_ARCH_NOT, \"i586 / i686 / x86_64\", ourarch);\n\nflag = 0;\n\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-ipxe-1.0.0+-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-linux-user-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-linux-user-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-linux-user-debugsource-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-seabios-1.10.2-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-sgabios-8-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-vgabios-1.10.2-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-arm-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-arm-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-curl-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-curl-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-dmg-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-dmg-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-iscsi-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-iscsi-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-rbd-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-rbd-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-ssh-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-ssh-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-debugsource-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-extra-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-extra-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-guest-agent-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-guest-agent-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-ksm-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-kvm-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-lang-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-ppc-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-ppc-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-s390-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-s390-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-testsuite-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-tools-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-tools-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-x86-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-x86-debuginfo-2.9.1-62.1\") ) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-linux-user / qemu-linux-user-debuginfo / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:17:51", "description": "According to the remote Linux kernel, this system is vulnerable to the following information disclosure vulnerabilities:\n\n - MSBDS leaks Store Buffer Entries which can be speculatively forwarded to a dependent load (store-to-load forwarding) as an optimization. The forward can also happen to a faulting or assisting load operation for a different memory address, which can cause an issue under certain conditions. Store buffers are partitioned between Hyper-Threads so cross thread forwarding is not possible. But if a thread enters or exits a sleep state the store buffer is repartitioned which can expose data from one thread to the other.\n (MSBDS/Fallout) (CVE-2018-12126)\n\n - MLDPS leaks Load Port Data. Load ports are used to perform load operations from memory or I/O. The received data is then forwarded to the register file or a subsequent operation. In some implementations the Load Port can contain stale data from a previous operation which can be forwarded to faulting or assisting loads under certain conditions, which again can cause an issue eventually. Load ports are shared between Hyper-Threads so cross thread leakage is possible. (MLPDS/RIDL) (CVE-2018-12127)\n\n MFBDS leaks Fill Buffer Entries. Fill buffers are used internally to manage L1 miss situations and to hold data which is returned or sent in response to a memory or I/O operation. Fill buffers can forward data to a load operation and also write data to the cache. When the fill buffer is deallocated it can retain the stale data of the preceding operations which can then be forwarded to a faulting or assisting load operation, which can cause an issue under certain conditions. Fill buffers are shared between Hyper-Threads so cross thread leakage is possible. (MFBDS/RIDL/ZombieLoad) (CVE-2018-12130)\n\n - MDSUM is a special case of MSBDS, MFBDS and MLPDS. An uncacheable load from memory that takes a fault or assist can leave data in a microarchitectural structure that may later be observed using one of the same methods used by MSBDS, MFBDS or MLPDS. (MDSUM/RIDL) (CVE-2019-11091)\n\nTo address these issues, update the kernel packages on your Linux system, disable Simultaneous Multi-Threading (SMT) or otherwise configure it to a non-vulnerable state, and apply microcode fixes to your hardware. Consult your Linux distribution and processor hardware vendors for details and patches.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-06-25T00:00:00", "type": "nessus", "title": "Linux Kernel Detection of MDS vulnerabilities (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["cpe:/o:linux:linux_kernel"], "id": "MDS_KERNEL_REPORTING_LINUX.NASL", "href": "https://www.tenable.com/plugins/nessus/126244", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(126244);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"Linux Kernel Detection of MDS vulnerabilities (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Linux kernel is affected by a series of information\ndisclosure vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the remote Linux kernel, this system is vulnerable to\nthe following information disclosure vulnerabilities:\n\n - MSBDS leaks Store Buffer Entries which can be\n speculatively forwarded to a dependent load\n (store-to-load forwarding) as an optimization. The\n forward can also happen to a faulting or assisting load\n operation for a different memory address, which can\n cause an issue under certain conditions. Store buffers\n are partitioned between Hyper-Threads so cross thread\n forwarding is not possible. But if a thread enters or\n exits a sleep state the store buffer is repartitioned\n which can expose data from one thread to the other.\n (MSBDS/Fallout) (CVE-2018-12126)\n\n - MLDPS leaks Load Port Data. Load ports are used to\n perform load operations from memory or I/O. The received\n data is then forwarded to the register file or a\n subsequent operation. In some implementations the Load\n Port can contain stale data from a previous operation\n which can be forwarded to faulting or assisting loads\n under certain conditions, which again can cause an issue\n eventually. Load ports are shared between Hyper-Threads\n so cross thread leakage is possible. (MLPDS/RIDL)\n (CVE-2018-12127)\n\n MFBDS leaks Fill Buffer Entries. Fill buffers are used\n internally to manage L1 miss situations and to hold data\n which is returned or sent in response to a memory or I/O\n operation. Fill buffers can forward data to a load\n operation and also write data to the cache. When the\n fill buffer is deallocated it can retain the stale data\n of the preceding operations which can then be forwarded\n to a faulting or assisting load operation, which can\n cause an issue under certain conditions. Fill buffers\n are shared between Hyper-Threads so cross thread leakage\n is possible. (MFBDS/RIDL/ZombieLoad) (CVE-2018-12130)\n\n - MDSUM is a special case of MSBDS, MFBDS and MLPDS. An\n uncacheable load from memory that takes a fault or\n assist can leave data in a microarchitectural structure\n that may later be observed using one of the same methods\n used by MSBDS, MFBDS or MLPDS. (MDSUM/RIDL)\n (CVE-2019-11091)\n\nTo address these issues, update the kernel packages on your Linux\nsystem, disable Simultaneous Multi-Threading (SMT) or otherwise\nconfigure it to a non-vulnerable state, and apply microcode fixes to\nyour hardware. Consult your Linux distribution and processor hardware\nvendors for details and patches.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://mdsattacks.com/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"1. Ensure the latest kernel and package updates are applied to your\n linux packages for your OS distribution.\n2. Either disable SMT or configure it to a non-vulnerable state.\n Consult your processor manufacturer for details.\n3. Apply the appropriate microcode fix for your hardware. Consult\n your processor manufacturer for details.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/06/25\");\n\n script_set_attribute(attribute:\"potential_vulnerability\", value:\"true\");\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:linux:linux_kernel\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Misc.\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info2.nasl\");\n script_require_keys(\"Host/Linux\", \"Settings/ParanoidReport\");\n\n exit(0);\n}\n\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"audit.inc\");\n\nif (report_paranoia < 2) audit(AUDIT_PARANOID);\n\nget_kb_item_or_exit(\"Host/Linux\");\nmds_results = get_one_kb_item(\"Host/cpu/vulnerabilities/mds\");\nif (empty_or_null(mds_results))\n{\n report =\n\"Either the Linux system is running a kernel that is outdated enough\nthat it does not record whether or not it is vulnerable to\nMicroarchitectural Data Sampling attacks, or a permissions issue was\nencountered when trying to access that data. A file containing those\ndetails should be found in /sys/devices/system/cpu/vulnerabilities/mds\nEnsure your scan has access to that file, and rerun the scan. It is\nextremely likely that the kernel is vulnerable if that mds file is not\npresent.\n\nCheck your scan account's permissions, and update your kernel packages\nto the latest versions available from your Linux distribution vendor\n(and reboot the system). If this scan continues to report that the\nfile is missing, you may need to contact your Linux distribution\nvendor to determine why the kernel is not reporting details of whether\nor not MDS attacks are mitigated or vulnerable on the system.\"; \n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : report\n );\n exit(0);\n}\nmatches = pregmatch(string:mds_results, pattern:\"^(Vulnerable|Not affected|Mitigation)(?:[:;] (.+))?$\");\nif(!empty_or_null(matches) && len(matches) >= 2)\n{\n result = matches[1];\n details = \"\";\n if (!empty_or_null(matches[2]))\n {\n details = matches[2];\n }\n if (result == \"Not affected\")\n {\n exit(0, \"The processor is not vulnerable to MDS attacks.\");\n }\n else if (result == \"Mitigation\")\n {\n report = 'The processor is vulnerable to MDS attacks, but the CPU buffer clearing\\nmitigation is enabled, so the vulnerability is mitigated.';\n if (!empty_or_null(details)) {\n report += \" Additional Details: \" + details;\n } \n exit(0, report);\n }\n else\n {\n report = mds_results + '\\n\\nThe processor is vulnerable to MDS attacks, and the CPU buffer clearing\\nmitigation has not been enabled.\\n\\n' +\n 'Consult your processor hardware and OS software vendors for patches and\\nmitigations to apply.';\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : report\n );\n exit(0);\n }\n}\n\n# If this spot is reached then /sys/devices/system/cpu/vulnerabilities/mds contains something unusual.\nexit(0, \"The contents of /sys/devices/system/cpu/vulnerabilities/mds contain an unexpected result and the host's vulnerability to MDS attacks cannot be determined.\");\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:24:50", "description": "The remote NewStart CGSL host, running version CORE 5.04 / MAIN 5.04, has kernel packages installed that are affected by multiple vulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub- operations. These sub-operations allow the processor to hand-off address generation logic into these sub- operations for optimized writes. Both of these sub- operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side- channel. (CVE-2018-12127)\n\n - A flaw was found in the implementation of the fill buffer, a mechanism used by modern CPUs when a cache- miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-08-12T00:00:00", "type": "nessus", "title": "NewStart CGSL CORE 5.04 / MAIN 5.04 : kernel Multiple Vulnerabilities (NS-SA-2019-0078)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": [], "id": "NEWSTART_CGSL_NS-SA-2019-0078_KERNEL.NASL", "href": "https://www.tenable.com/plugins/nessus/127287", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\n# The descriptive text and package checks in this plugin were\n# extracted from ZTE advisory NS-SA-2019-0078. The text\n# itself is copyright (C) ZTE, Inc.\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127287);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"NewStart CGSL CORE 5.04 / MAIN 5.04 : kernel Multiple Vulnerabilities (NS-SA-2019-0078)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote machine is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote NewStart CGSL host, running version CORE 5.04 / MAIN 5.04, has kernel packages installed that are affected by\nmultiple vulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data) sub-\n operations. These sub-operations allow the processor to\n hand-off address generation logic into these sub-\n operations for optimized writes. Both of these sub-\n operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to\n perform load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing side-\n channel. (CVE-2018-12127)\n\n - A flaw was found in the implementation of the fill\n buffer, a mechanism used by modern CPUs when a cache-\n miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"http://security.gd-linux.com/notice/NS-SA-2019-0078\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the vulnerable CGSL kernel packages. Note that updated packages may not be available yet. Please contact ZTE for\nmore information.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"NewStart CGSL Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/ZTE-CGSL/release\", \"Host/ZTE-CGSL/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/ZTE-CGSL/release\");\nif (isnull(release) || release !~ \"^CGSL (MAIN|CORE)\") audit(AUDIT_OS_NOT, \"NewStart Carrier Grade Server Linux\");\n\nif (release !~ \"CGSL CORE 5.04\" &&\n release !~ \"CGSL MAIN 5.04\")\n audit(AUDIT_OS_NOT, 'NewStart CGSL CORE 5.04 / NewStart CGSL MAIN 5.04');\n\nif (!get_kb_item(\"Host/ZTE-CGSL/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"NewStart Carrier Grade Server Linux\", cpu);\n\nflag = 0;\n\npkgs = {\n \"CGSL CORE 5.04\": [\n \"kernel-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-abi-whitelists-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-core-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debug-core-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debug-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debug-devel-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debug-modules-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debuginfo-common-x86_64-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-devel-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-doc-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-headers-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-modules-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-sign-keys-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-tools-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-tools-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-tools-libs-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-tools-libs-devel-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"perf-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"perf-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"python-perf-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"python-perf-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\"\n ],\n \"CGSL MAIN 5.04\": [\n \"kernel-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-abi-whitelists-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-debug-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-debug-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-debug-devel-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-debuginfo-common-x86_64-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-devel-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-doc-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-headers-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-sign-keys-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-tools-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-tools-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-tools-libs-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-tools-libs-devel-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"perf-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"perf-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"python-perf-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"python-perf-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\"\n ]\n};\npkg_list = pkgs[release];\n\nforeach (pkg in pkg_list)\n if (rpm_check(release:\"ZTE \" + release, reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:24:18", "description": "The remote NewStart CGSL host, running version MAIN 4.06, has libvirt packages installed that are affected by multiple vulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub- operations. These sub-operations allow the processor to hand-off address generation logic into these sub- operations for optimized writes. Both of these sub- operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill buffer, a mechanism used by modern CPUs when a cache- miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side- channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-08-12T00:00:00", "type": "nessus", "title": "NewStart CGSL MAIN 4.06 : libvirt Multiple Vulnerabilities (NS-SA-2019-0089)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": [], "id": "NEWSTART_CGSL_NS-SA-2019-0089_LIBVIRT.NASL", "href": "https://www.tenable.com/plugins/nessus/127306", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\n# The descriptive text and package checks in this plugin were\n# extracted from ZTE advisory NS-SA-2019-0089. The text\n# itself is copyright (C) ZTE, Inc.\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127306);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"NewStart CGSL MAIN 4.06 : libvirt Multiple Vulnerabilities (NS-SA-2019-0089)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote machine is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote NewStart CGSL host, running version MAIN 4.06, has libvirt packages installed that are affected by multiple\nvulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data) sub-\n operations. These sub-operations allow the processor to\n hand-off address generation logic into these sub-\n operations for optimized writes. Both of these sub-\n operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill\n buffer, a mechanism used by modern CPUs when a cache-\n miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to\n perform load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing side-\n channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"http://security.gd-linux.com/notice/NS-SA-2019-0089\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the vulnerable CGSL libvirt packages. Note that updated packages may not be available yet. Please contact ZTE\nfor more information.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"NewStart CGSL Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/ZTE-CGSL/release\", \"Host/ZTE-CGSL/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/ZTE-CGSL/release\");\nif (isnull(release) || release !~ \"^CGSL (MAIN|CORE)\") audit(AUDIT_OS_NOT, \"NewStart Carrier Grade Server Linux\");\n\nif (release !~ \"CGSL MAIN 4.06\")\n audit(AUDIT_OS_NOT, 'NewStart CGSL MAIN 4.06');\n\nif (!get_kb_item(\"Host/ZTE-CGSL/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"NewStart Carrier Grade Server Linux\", cpu);\n\nflag = 0;\n\npkgs = {\n \"CGSL MAIN 4.06\": [\n \"libvirt-0.10.2-64.el6_10.1\",\n \"libvirt-client-0.10.2-64.el6_10.1\",\n \"libvirt-debuginfo-0.10.2-64.el6_10.1\",\n \"libvirt-devel-0.10.2-64.el6_10.1\",\n \"libvirt-lock-sanlock-0.10.2-64.el6_10.1\",\n \"libvirt-python-0.10.2-64.el6_10.1\"\n ]\n};\npkg_list = pkgs[release];\n\nforeach (pkg in pkg_list)\n if (rpm_check(release:\"ZTE \" + release, reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:22:19", "description": "The remote NewStart CGSL host, running version MAIN 4.06, has qemu-kvm packages installed that are affected by multiple vulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub- operations. These sub-operations allow the processor to hand-off address generation logic into these sub- operations for optimized writes. Both of these sub- operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill buffer, a mechanism used by modern CPUs when a cache- miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side- channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-08-12T00:00:00", "type": "nessus", "title": "NewStart CGSL MAIN 4.06 : qemu-kvm Multiple Vulnerabilities (NS-SA-2019-0091)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": [], "id": "NEWSTART_CGSL_NS-SA-2019-0091_QEMU-KVM.NASL", "href": "https://www.tenable.com/plugins/nessus/127311", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\n# The descriptive text and package checks in this plugin were\n# extracted from ZTE advisory NS-SA-2019-0091. The text\n# itself is copyright (C) ZTE, Inc.\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127311);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"NewStart CGSL MAIN 4.06 : qemu-kvm Multiple Vulnerabilities (NS-SA-2019-0091)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote machine is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote NewStart CGSL host, running version MAIN 4.06, has qemu-kvm packages installed that are affected by multiple\nvulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data) sub-\n operations. These sub-operations allow the processor to\n hand-off address generation logic into these sub-\n operations for optimized writes. Both of these sub-\n operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill\n buffer, a mechanism used by modern CPUs when a cache-\n miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to\n perform load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing side-\n channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"http://security.gd-linux.com/notice/NS-SA-2019-0091\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the vulnerable CGSL qemu-kvm packages. Note that updated packages may not be available yet. Please contact ZTE\nfor more information.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"NewStart CGSL Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/ZTE-CGSL/release\", \"Host/ZTE-CGSL/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/ZTE-CGSL/release\");\nif (isnull(release) || release !~ \"^CGSL (MAIN|CORE)\") audit(AUDIT_OS_NOT, \"NewStart Carrier Grade Server Linux\");\n\nif (release !~ \"CGSL MAIN 4.06\")\n audit(AUDIT_OS_NOT, 'NewStart CGSL MAIN 4.06');\n\nif (!get_kb_item(\"Host/ZTE-CGSL/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"NewStart Carrier Grade Server Linux\", cpu);\n\nflag = 0;\n\npkgs = {\n \"CGSL MAIN 4.06\": [\n \"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\",\n \"qemu-img-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-debuginfo-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-tools-0.12.1.2-2.506.el6_10.3\"\n ]\n};\npkg_list = pkgs[release];\n\nforeach (pkg in pkg_list)\n if (rpm_check(release:\"ZTE \" + release, reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-kvm\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:34", "description": "Define md-clear CPUID bit.\n\nAssuming an updated host kernel and microcode, the md-clear bit will be automatically exposed to guests using the QEMU '-cpu host' arg, or libvirt 'host-model' or 'host-passthrough' configurations.\n\nGuests using a named CPU model it must be manually updated to add this extra CPU feature.\n\nResolves CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091\n\nNote that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website.\nTenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "nessus", "title": "Fedora 30 : 2:qemu / libvirt (2019-f910d35647) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:fedoraproject:fedora:2:qemu", "p-cpe:/a:fedoraproject:fedora:libvirt", "cpe:/o:fedoraproject:fedora:30"], "id": "FEDORA_2019-F910D35647.NASL", "href": "https://www.tenable.com/plugins/nessus/125234", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Fedora Security Advisory FEDORA-2019-f910d35647.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125234);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"FEDORA\", value:\"2019-f910d35647\");\n\n script_name(english:\"Fedora 30 : 2:qemu / libvirt (2019-f910d35647) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Fedora host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Define md-clear CPUID bit.\n\nAssuming an updated host kernel and microcode, the md-clear bit will\nbe automatically exposed to guests using the QEMU '-cpu host' arg, or\nlibvirt 'host-model' or 'host-passthrough' configurations.\n\nGuests using a named CPU model it must be manually updated to add this\nextra CPU feature.\n\nResolves CVE-2018-12126, CVE-2018-12127, CVE-2018-12130,\nCVE-2019-11091\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the Fedora update system website.\nTenable has attempted to automatically clean and format it as much as\npossible without introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bodhi.fedoraproject.org/updates/FEDORA-2019-f910d35647\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected 2:qemu and / or libvirt packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fedoraproject:fedora:2:qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fedoraproject:fedora:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:fedoraproject:fedora:30\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/17\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Fedora Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Fedora\" >!< release) audit(AUDIT_OS_NOT, \"Fedora\");\nos_ver = pregmatch(pattern: \"Fedora.*release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Fedora\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^30([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Fedora 30\", \"Fedora \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Fedora\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"FC30\", reference:\"qemu-3.1.0-8.fc30\", epoch:\"2\")) flag++;\nif (rpm_check(release:\"FC30\", reference:\"libvirt-5.1.0-5.fc30\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"2:qemu / libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:34", "description": "An update for kernel is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "CentOS 7 : kernel (CESA-2019:1168) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:centos:centos:bpftool", "p-cpe:/a:centos:centos:kernel", "p-cpe:/a:centos:centos:kernel-abi-whitelists", "p-cpe:/a:centos:centos:kernel-debug", "p-cpe:/a:centos:centos:kernel-debug-devel", "p-cpe:/a:centos:centos:kernel-devel", "p-cpe:/a:centos:centos:kernel-doc", "p-cpe:/a:centos:centos:kernel-headers", "p-cpe:/a:centos:centos:kernel-tools", "p-cpe:/a:centos:centos:kernel-tools-libs", "p-cpe:/a:centos:centos:kernel-tools-libs-devel", "p-cpe:/a:centos:centos:perf", "p-cpe:/a:centos:centos:python-perf", "cpe:/o:centos:centos:7"], "id": "CENTOS_RHSA-2019-1168.NASL", "href": "https://www.tenable.com/plugins/nessus/125167", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1168 and \n# CentOS Errata and Security Advisory 2019:1168 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125167);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1168\");\n\n script_name(english:\"CentOS 7 : kernel (CESA-2019:1168) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote CentOS host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n # https://lists.centos.org/pipermail/centos-announce/2019-May/023314.html\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?18841de9\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected kernel packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:bpftool\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:centos:centos:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"CentOS Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/CentOS/release\", \"Host/CentOS/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/CentOS/release\");\nif (isnull(release) || \"CentOS\" >!< release) audit(AUDIT_OS_NOT, \"CentOS\");\nos_ver = pregmatch(pattern: \"CentOS(?: Linux)? release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"CentOS\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"CentOS 7.x\", \"CentOS \" + os_ver);\n\nif (!get_kb_item(\"Host/CentOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"CentOS\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"bpftool-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-abi-whitelists-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-debug-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-debug-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-doc-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-headers-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-tools-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"perf-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"python-perf-3.10.0-957.12.2.el7\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"bpftool / kernel / kernel-abi-whitelists / kernel-debug / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:44", "description": "An update for kernel is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* aio O_DIRECT writes to non-page-aligned file locations on ext4 can result in the overlapped portion of the page containing zeros (BZ#1686170)\n\n* Tolerate new s390x crypto hardware for migration (BZ#1695496)", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "CentOS 6 : kernel (CESA-2019:1169) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:centos:centos:kernel", "p-cpe:/a:centos:centos:kernel-abi-whitelists", "p-cpe:/a:centos:centos:kernel-debug", "p-cpe:/a:centos:centos:kernel-debug-devel", "p-cpe:/a:centos:centos:kernel-devel", "p-cpe:/a:centos:centos:kernel-doc", "p-cpe:/a:centos:centos:kernel-firmware", "p-cpe:/a:centos:centos:kernel-headers", "p-cpe:/a:centos:centos:perf", "p-cpe:/a:centos:centos:python-perf", "cpe:/o:centos:centos:6"], "id": "CENTOS_RHSA-2019-1169.NASL", "href": "https://www.tenable.com/plugins/nessus/125168", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1169 and \n# CentOS Errata and Security Advisory 2019:1169 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125168);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1169\");\n\n script_name(english:\"CentOS 6 : kernel (CESA-2019:1169) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote CentOS host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* aio O_DIRECT writes to non-page-aligned file locations on ext4 can\nresult in the overlapped portion of the page containing zeros\n(BZ#1686170)\n\n* Tolerate new s390x crypto hardware for migration (BZ#1695496)\"\n );\n # https://lists.centos.org/pipermail/centos-announce/2019-May/023309.html\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?40116af0\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected kernel packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-firmware\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:centos:centos:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"CentOS Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/CentOS/release\", \"Host/CentOS/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/CentOS/release\");\nif (isnull(release) || \"CentOS\" >!< release) audit(AUDIT_OS_NOT, \"CentOS\");\nos_ver = pregmatch(pattern: \"CentOS(?: Linux)? release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"CentOS\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"CentOS 6.x\", \"CentOS \" + os_ver);\n\nif (!get_kb_item(\"Host/CentOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"CentOS\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-abi-whitelists-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-debug-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-debug-devel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-devel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-doc-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-firmware-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-headers-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"perf-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"python-perf-2.6.32-754.14.2.el6\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / kernel-debug-devel / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:21", "description": "An update for libvirt is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "CentOS 6 : libvirt (CESA-2019:1180) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:centos:centos:libvirt", "p-cpe:/a:centos:centos:libvirt-client", "p-cpe:/a:centos:centos:libvirt-devel", "p-cpe:/a:centos:centos:libvirt-lock-sanlock", "p-cpe:/a:centos:centos:libvirt-python", "cpe:/o:centos:centos:6"], "id": "CENTOS_RHSA-2019-1180.NASL", "href": "https://www.tenable.com/plugins/nessus/125171", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1180 and \n# CentOS Errata and Security Advisory 2019:1180 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125171);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1180\");\n\n script_name(english:\"CentOS 6 : libvirt (CESA-2019:1180) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote CentOS host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for libvirt is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n # https://lists.centos.org/pipermail/centos-announce/2019-May/023308.html\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?38b34d5c\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected libvirt packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-python\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:centos:centos:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"CentOS Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/CentOS/release\", \"Host/CentOS/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/CentOS/release\");\nif (isnull(release) || \"CentOS\" >!< release) audit(AUDIT_OS_NOT, \"CentOS\");\nos_ver = pregmatch(pattern: \"CentOS(?: Linux)? release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"CentOS\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"CentOS 6.x\", \"CentOS \" + os_ver);\n\nif (!get_kb_item(\"Host/CentOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"CentOS\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"CentOS-6\", reference:\"libvirt-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"libvirt-client-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"libvirt-devel-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"CentOS-6\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"libvirt-python-0.10.2-64.el6_10.1\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-client / libvirt-devel / libvirt-lock-sanlock / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:47", "description": "An update for libvirt is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "CentOS 7 : libvirt (CESA-2019:1177) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:centos:centos:libvirt", "p-cpe:/a:centos:centos:libvirt-admin", "p-cpe:/a:centos:centos:libvirt-bash-completion", "p-cpe:/a:centos:centos:libvirt-client", "p-cpe:/a:centos:centos:libvirt-daemon", "p-cpe:/a:centos:centos:libvirt-daemon-config-network", "p-cpe:/a:centos:centos:libvirt-daemon-config-nwfilter", "p-cpe:/a:centos:centos:libvirt-daemon-driver-interface", "p-cpe:/a:centos:centos:libvirt-daemon-driver-lxc", "p-cpe:/a:centos:centos:libvirt-daemon-driver-network", "p-cpe:/a:centos:centos:libvirt-daemon-driver-nodedev", "p-cpe:/a:centos:centos:libvirt-daemon-driver-nwfilter", "p-cpe:/a:centos:centos:libvirt-daemon-driver-qemu", "p-cpe:/a:centos:centos:libvirt-daemon-driver-secret", "p-cpe:/a:centos:centos:libvirt-daemon-driver-storage", "p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-core", "p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-disk", "p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-gluster", "p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-logical", "p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:centos:centos:libvirt-daemon-kvm", "p-cpe:/a:centos:centos:libvirt-daemon-lxc", "p-cpe:/a:centos:centos:libvirt-devel", "p-cpe:/a:centos:centos:libvirt-docs", "p-cpe:/a:centos:centos:libvirt-libs", "p-cpe:/a:centos:centos:libvirt-lock-sanlock", "p-cpe:/a:centos:centos:libvirt-login-shell", "p-cpe:/a:centos:centos:libvirt-nss", "cpe:/o:centos:centos:7"], "id": "CENTOS_RHSA-2019-1177.NASL", "href": "https://www.tenable.com/plugins/nessus/125169", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1177 and \n# CentOS Errata and Security Advisory 2019:1177 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125169);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1177\");\n\n script_name(english:\"CentOS 7 : libvirt (CESA-2019:1177) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote CentOS host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for libvirt is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n # https://lists.centos.org/pipermail/centos-announce/2019-May/023313.html\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?151fab75\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected libvirt packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-bash-completion\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-gluster\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-docs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-login-shell\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:centos:centos:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"CentOS Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/CentOS/release\", \"Host/CentOS/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/CentOS/release\");\nif (isnull(release) || \"CentOS\" >!< release) audit(AUDIT_OS_NOT, \"CentOS\");\nos_ver = pregmatch(pattern: \"CentOS(?: Linux)? release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"CentOS\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"CentOS 7.x\", \"CentOS \" + os_ver);\n\nif (!get_kb_item(\"Host/CentOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"CentOS\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-admin-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-bash-completion-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-client-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-network-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-nwfilter-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-gluster-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-kvm-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-daemon-lxc-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-devel-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-docs-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-libs-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-login-shell-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"libvirt-nss-4.5.0-10.el7_6.9\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-admin / libvirt-bash-completion / libvirt-client / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:35", "description": "The version of Citrix XenServer running on the remote host is missing a security hotfix. It is, therefore, affected by microarchitectural data sampling speculative side-channel vulnerabilities. These vulnerabilities may allow a local attacker on a guest machine to sample the contents of memory reads and writes. Please refer to the vendor advisory for mitigating factors.", "cvss3": {}, "published": "2019-05-30T00:00:00", "type": "nessus", "title": "Citrix XenServer Microarchitectural Data Sampling Speculative Side-Channel Vulnerabilities (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout) (CTX2251995)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-10-30T00:00:00", "cpe": ["cpe:/a:citrix:xenserver"], "id": "CITRIX_XENSERVER_CTX251995.NASL", "href": "https://www.tenable.com/plugins/nessus/125549", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125549);\n script_version(\"1.2\");\n script_cvs_date(\"Date: 2019/10/30 13:24:46\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_bugtraq_id(108330);\n\n script_name(english:\"Citrix XenServer Microarchitectural Data Sampling Speculative Side-Channel Vulnerabilities (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout) (CTX2251995)\");\n script_summary(english:\"Checks for patches.\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"A server virtualization platform installed on the remote host is\nmissing a security patch.\");\n script_set_attribute(attribute:\"description\", value:\n\"The version of Citrix XenServer running on the remote host is missing\na security hotfix. It is, therefore, affected by microarchitectural\ndata sampling speculative side-channel vulnerabilities. These\nvulnerabilities may allow a local attacker on a guest machine to\nsample the contents of memory reads and writes. Please refer to the\nvendor advisory for mitigating factors.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://support.citrix.com/article/CTX251995\");\n script_set_attribute(attribute:\"solution\", value:\n\"Apply the appropriate hotfix according to the vendor advisory.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/30\");\n\n script_set_attribute(attribute:\"plugin_type\",value:\"local\");\n script_set_attribute(attribute:\"cpe\",value:\"cpe:/a:citrix:xenserver\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Misc.\");\n\n script_copyright(english:\"This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"citrix_xenserver_version.nbin\");\n script_require_keys(\"Host/XenServer/version\");\n\n exit(0);\n}\n\ninclude(\"vcf.inc\");\ninclude(\"vcf_extras.inc\");\n\napp_info = vcf::xenserver::get_app_info();\n\nconstraints = [\n { \"equal\" : \"7.0\", \"patches\" : # XenServer 7.0\n [\"XS70E068\"] }, # CTX250038\n { \"equal\" : \"7.1.2\", \"patches\" : # XenServer 7.1 LTSR CU2\n [\"XS71ECU2008\"] }, # CTX250039\n { \"equal\" : \"7.6\", \"patches\" : # XenServer 7.6\n [\"XS76E004\"] }, # CTX250040\n { \"equal\" : \"8.0\", \"patches\" : # XenServer 8.0\n [\"XS80E001\"] } # CTX250041\n];\n\nvcf::xenserver::check_version_and_report(app_info:app_info, constraints:constraints, severity:SECURITY_WARNING);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:32:43", "description": "According to the versions of the libvirt packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS):\n Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu ments/corporate-information/SA00233-microcode-update-gu idance_05132019.pdf(CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS):\n Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu ments/corporate-information/SA00233-microcode-update-gu idance_05132019.pdf(CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS):\n Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu ments/corporate-information/SA00233-microcode-update-gu idance_05132019.pdf(CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu ments/corporate-information/SA00233-microcode-update-gu idance_05132019.pdf(CVE-2019-11091)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-11-27T00:00:00", "type": "nessus", "title": "EulerOS 2.0 SP8 : libvirt (EulerOS-SA-2019-2289)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:libvirt-bash-completion", "p-cpe:/a:huawei:euleros:libvirt-client", "p-cpe:/a:huawei:euleros:libvirt-daemon", "p-cpe:/a:huawei:euleros:libvirt-daemon-config-network", "p-cpe:/a:huawei:euleros:libvirt-daemon-config-nwfilter", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-interface", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-network", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-nodedev", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-nwfilter", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-qemu", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-secret", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-core", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-disk", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-iscsi-direct", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-logical", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:huawei:euleros:libvirt-daemon-kvm", "p-cpe:/a:huawei:euleros:libvirt-libs", "cpe:/o:huawei:euleros:2.0"], "id": "EULEROS_SA-2019-2289.NASL", "href": "https://www.tenable.com/plugins/nessus/131355", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(131355);\n script_version(\"1.6\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"EulerOS 2.0 SP8 : libvirt (EulerOS-SA-2019-2289)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the libvirt packages installed, the\nEulerOS installation on the remote host is affected by the following\nvulnerabilities :\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS):\n Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user\n to potentially enable information disclosure via a side\n channel with local access. A list of impacted products\n can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu\n ments/corporate-information/SA00233-microcode-update-gu\n idance_05132019.pdf(CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS):\n Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user\n to potentially enable information disclosure via a side\n channel with local access. A list of impacted products\n can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu\n ments/corporate-information/SA00233-microcode-update-gu\n idance_05132019.pdf(CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS):\n Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user\n to potentially enable information disclosure via a side\n channel with local access. A list of impacted products\n can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu\n ments/corporate-information/SA00233-microcode-update-gu\n idance_05132019.pdf(CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an\n authenticated user to potentially enable information\n disclosure via a side channel with local access. A list\n of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu\n ments/corporate-information/SA00233-microcode-update-gu\n idance_05132019.pdf(CVE-2019-11091)\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the EulerOS security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-2289\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?dba9db63\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected libvirt packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/11/27\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/11/27\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-bash-completion\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-iscsi-direct\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-daemon-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:2.0\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/sp\");\n script_exclude_keys(\"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nif (release !~ \"^EulerOS release 2\\.0(\\D|$)\") audit(AUDIT_OS_NOT, \"EulerOS 2.0\");\n\nsp = get_kb_item(\"Host/EulerOS/sp\");\nif (isnull(sp) || sp !~ \"^(8)$\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP8\");\n\nuvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (!empty_or_null(uvp)) audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP8\", \"EulerOS UVP \" + uvp);\n\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"aarch64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"aarch64\", cpu);\n\nflag = 0;\n\npkgs = [\"libvirt-bash-completion-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-client-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-config-network-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-config-nwfilter-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-interface-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-network-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-nodedev-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-nwfilter-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-qemu-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-secret-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-storage-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-storage-core-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-storage-disk-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-storage-iscsi-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-storage-iscsi-direct-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-storage-logical-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-storage-mpath-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-driver-storage-scsi-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-daemon-kvm-4.7.0-5.h2.eulerosv2r8\",\n \"libvirt-libs-4.7.0-5.h2.eulerosv2r8\"];\n\nforeach (pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", sp:\"8\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:33:10", "description": "According to the versions of the qemu packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS):\n Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu ments/corporate-information/SA00233-microcode-update-gu idance_05132019.pdf(CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS):\n Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu ments/corporate-information/SA00233-microcode-update-gu idance_05132019.pdf(CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS):\n Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu ments/corporate-information/SA00233-microcode-update-gu idance_05132019.pdf(CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu ments/corporate-information/SA00233-microcode-update-gu idance_05132019.pdf(CVE-2019-11091)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-11-27T00:00:00", "type": "nessus", "title": "EulerOS 2.0 SP8 : qemu (EulerOS-SA-2019-2300)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:qemu-audio-alsa", "p-cpe:/a:huawei:euleros:qemu-audio-oss", "p-cpe:/a:huawei:euleros:qemu-audio-pa", "p-cpe:/a:huawei:euleros:qemu-audio-sdl", "p-cpe:/a:huawei:euleros:qemu-block-curl", "p-cpe:/a:huawei:euleros:qemu-block-dmg", "p-cpe:/a:huawei:euleros:qemu-block-gluster", "p-cpe:/a:huawei:euleros:qemu-block-iscsi", "p-cpe:/a:huawei:euleros:qemu-block-nfs", "p-cpe:/a:huawei:euleros:qemu-block-rbd", "p-cpe:/a:huawei:euleros:qemu-block-ssh", "p-cpe:/a:huawei:euleros:qemu-common", "p-cpe:/a:huawei:euleros:qemu-img", "p-cpe:/a:huawei:euleros:qemu-kvm", "p-cpe:/a:huawei:euleros:qemu-system-aarch64", "p-cpe:/a:huawei:euleros:qemu-system-aarch64-core", "p-cpe:/a:huawei:euleros:qemu-ui-curses", "p-cpe:/a:huawei:euleros:qemu-ui-gtk", "p-cpe:/a:huawei:euleros:qemu-ui-sdl", "cpe:/o:huawei:euleros:2.0"], "id": "EULEROS_SA-2019-2300.NASL", "href": "https://www.tenable.com/plugins/nessus/131366", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(131366);\n script_version(\"1.6\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"EulerOS 2.0 SP8 : qemu (EulerOS-SA-2019-2300)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the qemu packages installed, the EulerOS\ninstallation on the remote host is affected by the following\nvulnerabilities :\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS):\n Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user\n to potentially enable information disclosure via a side\n channel with local access. A list of impacted products\n can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu\n ments/corporate-information/SA00233-microcode-update-gu\n idance_05132019.pdf(CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS):\n Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user\n to potentially enable information disclosure via a side\n channel with local access. A list of impacted products\n can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu\n ments/corporate-information/SA00233-microcode-update-gu\n idance_05132019.pdf(CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS):\n Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user\n to potentially enable information disclosure via a side\n channel with local access. A list of impacted products\n can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu\n ments/corporate-information/SA00233-microcode-update-gu\n idance_05132019.pdf(CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an\n authenticated user to potentially enable information\n disclosure via a side channel with local access. A list\n of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/docu\n ments/corporate-information/SA00233-microcode-update-gu\n idance_05132019.pdf(CVE-2019-11091)\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the EulerOS security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-2300\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?c527722b\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected qemu packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/11/27\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/11/27\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-audio-alsa\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-audio-oss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-audio-pa\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-audio-sdl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-block-curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-block-dmg\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-block-gluster\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-block-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-block-nfs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-block-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-block-ssh\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-system-aarch64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-system-aarch64-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-ui-curses\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-ui-gtk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:qemu-ui-sdl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:2.0\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/sp\");\n script_exclude_keys(\"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nif (release !~ \"^EulerOS release 2\\.0(\\D|$)\") audit(AUDIT_OS_NOT, \"EulerOS 2.0\");\n\nsp = get_kb_item(\"Host/EulerOS/sp\");\nif (isnull(sp) || sp !~ \"^(8)$\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP8\");\n\nuvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (!empty_or_null(uvp)) audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP8\", \"EulerOS UVP \" + uvp);\n\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"aarch64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"aarch64\", cpu);\n\nflag = 0;\n\npkgs = [\"qemu-audio-alsa-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-audio-oss-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-audio-pa-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-audio-sdl-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-block-curl-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-block-dmg-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-block-gluster-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-block-iscsi-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-block-nfs-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-block-rbd-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-block-ssh-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-common-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-img-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-kvm-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-system-aarch64-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-system-aarch64-core-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-ui-curses-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-ui-gtk-3.0.1-3.h3.eulerosv2r8\",\n \"qemu-ui-sdl-3.0.1-3.h3.eulerosv2r8\"];\n\nforeach (pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", sp:\"8\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:24:56", "description": "The remote Oracle Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2019-1167 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-08-12T00:00:00", "type": "nessus", "title": "Oracle Linux 8 : kernel (ELSA-2019-1167)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": ["cpe:/o:oracle:linux:8", "p-cpe:/a:oracle:linux:bpftool", "p-cpe:/a:oracle:linux:kernel", "p-cpe:/a:oracle:linux:kernel-abi-whitelists", "p-cpe:/a:oracle:linux:kernel-core", "p-cpe:/a:oracle:linux:kernel-cross-headers", "p-cpe:/a:oracle:linux:kernel-debug", "p-cpe:/a:oracle:linux:kernel-debug-core", "p-cpe:/a:oracle:linux:kernel-debug-devel", "p-cpe:/a:oracle:linux:kernel-debug-modules", "p-cpe:/a:oracle:linux:kernel-debug-modules-extra", "p-cpe:/a:oracle:linux:kernel-devel", "p-cpe:/a:oracle:linux:kernel-headers", "p-cpe:/a:oracle:linux:kernel-modules", "p-cpe:/a:oracle:linux:kernel-modules-extra", "p-cpe:/a:oracle:linux:kernel-tools", "p-cpe:/a:oracle:linux:kernel-tools-libs", "p-cpe:/a:oracle:linux:kernel-tools-libs-devel", "p-cpe:/a:oracle:linux:perf", "p-cpe:/a:oracle:linux:python3-perf"], "id": "ORACLELINUX_ELSA-2019-1167.NASL", "href": "https://www.tenable.com/plugins/nessus/127583", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Oracle Linux Security Advisory ELSA-2019-1167.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127583);\n script_version(\"1.6\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"RHSA\", value:\"2019:1167\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"Oracle Linux 8 : kernel (ELSA-2019-1167)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Oracle Linux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Oracle Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nELSA-2019-1167 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://linux.oracle.com/errata/ELSA-2019-1167.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/30\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:8\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:bpftool\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-cross-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-debug-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-debug-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-debug-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:python3-perf\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"linux_alt_patch_detect.nasl\", \"ssh_get_info.nasl\");\n script_require_keys(\"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/local_checks_enabled\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('ksplice.inc');\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item('Host/OracleLinux')) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar release = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar os_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Oracle Linux');\nvar os_ver = os_ver[1];\nif (! preg(pattern:\"^8([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'Oracle Linux 8', 'Oracle Linux ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Oracle Linux', cpu);\n\nvar machine_uptrack_level = get_one_kb_item('Host/uptrack-uname-r');\nif (machine_uptrack_level)\n{\n var trimmed_uptrack_level = ereg_replace(string:machine_uptrack_level, pattern:\"\\.(x86_64|i[3-6]86|aarch64)$\", replace:'');\n var fixed_uptrack_levels = ['4.18.0-80.1.2.el8_0'];\n foreach var fixed_uptrack_level ( fixed_uptrack_levels ) {\n if (rpm_spec_vers_cmp(a:trimmed_uptrack_level, b:fixed_uptrack_level) >= 0)\n {\n audit(AUDIT_PATCH_INSTALLED, 'KSplice hotfix for ELSA-2019-1167');\n }\n }\n __rpm_report = 'Running KSplice level of ' + trimmed_uptrack_level + ' does not meet the minimum fixed level of ' + join(fixed_uptrack_levels, sep:' / ') + ' for this advisory.\\n\\n';\n}\n\nvar kernel_major_minor = get_kb_item('Host/uname/major_minor');\nif (empty_or_null(kernel_major_minor)) exit(1, 'Unable to determine kernel major-minor level.');\nvar expected_kernel_major_minor = '4.18';\nif (kernel_major_minor != expected_kernel_major_minor)\n audit(AUDIT_OS_NOT, 'running kernel level ' + expected_kernel_major_minor + ', it is running kernel level ' + kernel_major_minor);\n\nvar pkgs = [\n {'reference':'bpftool-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-4.18.0'},\n {'reference':'kernel-abi-whitelists-4.18.0-80.1.2.el8_0', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-abi-whitelists-4.18.0'},\n {'reference':'kernel-core-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-core-4.18.0'},\n {'reference':'kernel-cross-headers-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-cross-headers-4.18.0'},\n {'reference':'kernel-debug-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-debug-4.18.0'},\n {'reference':'kernel-debug-core-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-debug-core-4.18.0'},\n {'reference':'kernel-debug-devel-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-debug-devel-4.18.0'},\n {'reference':'kernel-debug-modules-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-debug-modules-4.18.0'},\n {'reference':'kernel-debug-modules-extra-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-debug-modules-extra-4.18.0'},\n {'reference':'kernel-devel-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-devel-4.18.0'},\n {'reference':'kernel-headers-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-headers-4.18.0'},\n {'reference':'kernel-modules-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-modules-4.18.0'},\n {'reference':'kernel-modules-extra-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-modules-extra-4.18.0'},\n {'reference':'kernel-tools-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-tools-4.18.0'},\n {'reference':'kernel-tools-libs-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-tools-libs-4.18.0'},\n {'reference':'kernel-tools-libs-devel-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-tools-libs-devel-4.18.0'},\n {'reference':'kernel-tools-libs-devel-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-tools-libs-devel-4.18.0'},\n {'reference':'perf-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'python3-perf-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var sp = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = 'EL' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && release) {\n if (exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n } else {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'bpftool / kernel / kernel-abi-whitelists / etc');\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:34", "description": "From Red Hat Security Advisory 2019:1178 :\n\nAn update for qemu-kvm is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Oracle Linux 7 : qemu-kvm (ELSA-2019-1178) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:oracle:linux:qemu-img", "p-cpe:/a:oracle:linux:qemu-kvm", "p-cpe:/a:oracle:linux:qemu-kvm-common", "p-cpe:/a:oracle:linux:qemu-kvm-tools", "cpe:/o:oracle:linux:7"], "id": "ORACLELINUX_ELSA-2019-1178.NASL", "href": "https://www.tenable.com/plugins/nessus/125189", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Red Hat Security Advisory RHSA-2019:1178 and \n# Oracle Linux Security Advisory ELSA-2019-1178 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125189);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1178\");\n\n script_name(english:\"Oracle Linux 7 : qemu-kvm (ELSA-2019-1178) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Oracle Linux host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"From Red Hat Security Advisory 2019:1178 :\n\nAn update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://oss.oracle.com/pipermail/el-errata/2019-May/008735.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected qemu-kvm packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/OracleLinux\")) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nos_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Oracle Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Oracle Linux 7\", \"Oracle Linux \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Oracle Linux\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nflag = 0;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-160.el7_6.2\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-tools\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:24", "description": "The remote Oracle Linux 6 / 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2019-4629 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Oracle Linux 6 / 7 : Unbreakable Enterprise kernel (ELSA-2019-4629)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-09-08T00:00:00", "cpe": ["cpe:/o:oracle:linux:6", "cpe:/o:oracle:linux:7", "p-cpe:/a:oracle:linux:kernel-uek", "p-cpe:/a:oracle:linux:kernel-uek-debug", "p-cpe:/a:oracle:linux:kernel-uek-debug-devel", "p-cpe:/a:oracle:linux:kernel-uek-devel", "p-cpe:/a:oracle:linux:kernel-uek-doc", "p-cpe:/a:oracle:linux:kernel-uek-firmware"], "id": "ORACLELINUX_ELSA-2019-4629.NASL", "href": "https://www.tenable.com/plugins/nessus/125114", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Oracle Linux Security Advisory ELSA-2019-4629.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125114);\n script_version(\"1.8\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/09/08\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"Oracle Linux 6 / 7 : Unbreakable Enterprise kernel (ELSA-2019-4629)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Oracle Linux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Oracle Linux 6 / 7 host has packages installed that are affected by multiple vulnerabilities as referenced in\nthe ELSA-2019-4629 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://linux.oracle.com/errata/ELSA-2019-4629.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:6\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:7\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-firmware\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"linux_alt_patch_detect.nasl\", \"ssh_get_info.nasl\");\n script_require_keys(\"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/local_checks_enabled\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('ksplice.inc');\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item('Host/OracleLinux')) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar release = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar os_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Oracle Linux');\nvar os_ver = os_ver[1];\nif (! preg(pattern:\"^(6|7)([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'Oracle Linux 6 / 7', 'Oracle Linux ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Oracle Linux', cpu);\nif ('x86_64' >!< cpu) audit(AUDIT_ARCH_NOT, 'x86_64', cpu);\n\nvar machine_uptrack_level = get_one_kb_item('Host/uptrack-uname-r');\nif (machine_uptrack_level)\n{\n var trimmed_uptrack_level = ereg_replace(string:machine_uptrack_level, pattern:\"\\.(x86_64|i[3-6]86|aarch64)$\", replace:'');\n var fixed_uptrack_levels = ['4.1.12-124.26.12.el6uek', '4.1.12-124.26.12.el7uek'];\n foreach var fixed_uptrack_level ( fixed_uptrack_levels ) {\n if (rpm_spec_vers_cmp(a:trimmed_uptrack_level, b:fixed_uptrack_level) >= 0)\n {\n audit(AUDIT_PATCH_INSTALLED, 'KSplice hotfix for ELSA-2019-4629');\n }\n }\n __rpm_report = 'Running KSplice level of ' + trimmed_uptrack_level + ' does not meet the minimum fixed level of ' + join(fixed_uptrack_levels, sep:' / ') + ' for this advisory.\\n\\n';\n}\n\nvar kernel_major_minor = get_kb_item('Host/uname/major_minor');\nif (empty_or_null(kernel_major_minor)) exit(1, 'Unable to determine kernel major-minor level.');\nvar expected_kernel_major_minor = '4.1';\nif (kernel_major_minor != expected_kernel_major_minor)\n audit(AUDIT_OS_NOT, 'running kernel level ' + expected_kernel_major_minor + ', it is running kernel level ' + kernel_major_minor);\n\nvar pkgs = [\n {'reference':'kernel-uek-4.1.12-124.26.12.el6uek', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-4.1.12'},\n {'reference':'kernel-uek-debug-4.1.12-124.26.12.el6uek', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-4.1.12'},\n {'reference':'kernel-uek-debug-devel-4.1.12-124.26.12.el6uek', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-devel-4.1.12'},\n {'reference':'kernel-uek-devel-4.1.12-124.26.12.el6uek', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-devel-4.1.12'},\n {'reference':'kernel-uek-doc-4.1.12-124.26.12.el6uek', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-doc-4.1.12'},\n {'reference':'kernel-uek-firmware-4.1.12-124.26.12.el6uek', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-firmware-4.1.12'},\n {'reference':'kernel-uek-4.1.12-124.26.12.el7uek', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-4.1.12'},\n {'reference':'kernel-uek-debug-4.1.12-124.26.12.el7uek', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-4.1.12'},\n {'reference':'kernel-uek-debug-devel-4.1.12-124.26.12.el7uek', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-devel-4.1.12'},\n {'reference':'kernel-uek-devel-4.1.12-124.26.12.el7uek', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-devel-4.1.12'},\n {'reference':'kernel-uek-doc-4.1.12-124.26.12.el7uek', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-doc-4.1.12'},\n {'reference':'kernel-uek-firmware-4.1.12-124.26.12.el7uek', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-firmware-4.1.12'}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var sp = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = 'EL' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && release) {\n if (exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n } else {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'kernel-uek / kernel-uek-debug / kernel-uek-debug-devel / etc');\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:48", "description": "The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2019-4628 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Oracle Linux 7 : Unbreakable Enterprise kernel (ELSA-2019-4628)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-09-08T00:00:00", "cpe": ["cpe:/o:oracle:linux:7", "p-cpe:/a:oracle:linux:kernel-uek", "p-cpe:/a:oracle:linux:kernel-uek-debug", "p-cpe:/a:oracle:linux:kernel-uek-debug-devel", "p-cpe:/a:oracle:linux:kernel-uek-devel", "p-cpe:/a:oracle:linux:kernel-uek-doc", "p-cpe:/a:oracle:linux:kernel-uek-headers", "p-cpe:/a:oracle:linux:kernel-uek-tools", "p-cpe:/a:oracle:linux:kernel-uek-tools-libs", "p-cpe:/a:oracle:linux:kernel-uek-tools-libs-devel", "p-cpe:/a:oracle:linux:perf", "p-cpe:/a:oracle:linux:python-perf"], "id": "ORACLELINUX_ELSA-2019-4628.NASL", "href": "https://www.tenable.com/plugins/nessus/125113", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Oracle Linux Security Advisory ELSA-2019-4628.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125113);\n script_version(\"1.8\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/09/08\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"Oracle Linux 7 : Unbreakable Enterprise kernel (ELSA-2019-4628)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Oracle Linux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nELSA-2019-4628 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://linux.oracle.com/errata/ELSA-2019-4628.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:7\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:python-perf\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"linux_alt_patch_detect.nasl\", \"ssh_get_info.nasl\");\n script_require_keys(\"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/local_checks_enabled\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('ksplice.inc');\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item('Host/OracleLinux')) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar release = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar os_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Oracle Linux');\nvar os_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'Oracle Linux 7', 'Oracle Linux ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Oracle Linux', cpu);\n\nvar machine_uptrack_level = get_one_kb_item('Host/uptrack-uname-r');\nif (machine_uptrack_level)\n{\n var trimmed_uptrack_level = ereg_replace(string:machine_uptrack_level, pattern:\"\\.(x86_64|i[3-6]86|aarch64)$\", replace:'');\n var fixed_uptrack_levels = ['4.14.35-1844.4.5.2.el7uek'];\n foreach var fixed_uptrack_level ( fixed_uptrack_levels ) {\n if (rpm_spec_vers_cmp(a:trimmed_uptrack_level, b:fixed_uptrack_level) >= 0)\n {\n audit(AUDIT_PATCH_INSTALLED, 'KSplice hotfix for ELSA-2019-4628');\n }\n }\n __rpm_report = 'Running KSplice level of ' + trimmed_uptrack_level + ' does not meet the minimum fixed level of ' + join(fixed_uptrack_levels, sep:' / ') + ' for this advisory.\\n\\n';\n}\n\nvar kernel_major_minor = get_kb_item('Host/uname/major_minor');\nif (empty_or_null(kernel_major_minor)) exit(1, 'Unable to determine kernel major-minor level.');\nvar expected_kernel_major_minor = '4.14';\nif (kernel_major_minor != expected_kernel_major_minor)\n audit(AUDIT_OS_NOT, 'running kernel level ' + expected_kernel_major_minor + ', it is running kernel level ' + kernel_major_minor);\n\nvar pkgs = [\n {'reference':'kernel-uek-4.14.35-1844.4.5.2.el7uek', 'cpu':'aarch64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-4.14.35'},\n {'reference':'kernel-uek-4.14.35-1844.4.5.2.el7uek', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-4.14.35'},\n {'reference':'kernel-uek-debug-4.14.35-1844.4.5.2.el7uek', 'cpu':'aarch64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-4.14.35'},\n {'reference':'kernel-uek-debug-4.14.35-1844.4.5.2.el7uek', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-4.14.35'},\n {'reference':'kernel-uek-debug-devel-4.14.35-1844.4.5.2.el7uek', 'cpu':'aarch64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-devel-4.14.35'},\n {'reference':'kernel-uek-debug-devel-4.14.35-1844.4.5.2.el7uek', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-devel-4.14.35'},\n {'reference':'kernel-uek-devel-4.14.35-1844.4.5.2.el7uek', 'cpu':'aarch64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-devel-4.14.35'},\n {'reference':'kernel-uek-devel-4.14.35-1844.4.5.2.el7uek', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-devel-4.14.35'},\n {'reference':'kernel-uek-doc-4.14.35-1844.4.5.2.el7uek', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-doc-4.14.35'},\n {'reference':'kernel-uek-headers-4.14.35-1844.4.5.2.el7uek', 'cpu':'aarch64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-headers-4.14.35'},\n {'reference':'kernel-uek-tools-4.14.35-1844.4.5.2.el7uek', 'cpu':'aarch64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-tools-4.14.35'},\n {'reference':'kernel-uek-tools-4.14.35-1844.4.5.2.el7uek', 'cpu':'x86_64', 'releas
Ubuntu Update for libvirt USN-3985-1
