{"redhat": [{"lastseen": "2021-10-19T20:35:39", "description": "Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:13:31", "type": "redhat", "title": "(RHSA-2019:1189) Important: qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-08-14T07:34:37", "id": "RHSA-2019:1189", "href": "https://access.redhat.com/errata/RHSA-2019:1189", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:35:36", "description": "The kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:23:44", "type": "redhat", "title": "(RHSA-2019:1168) Important: kernel security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:23:09", "id": "RHSA-2019:1168", "href": "https://access.redhat.com/errata/RHSA-2019:1168", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:39:00", "description": "The kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nBug Fix(es):\n\n* rwsem in inconsistent state leading system to hung (BZ#1690318)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:01:17", "type": "redhat", "title": "(RHSA-2019:1172) Important: kernel security and bug fix update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:11:20", "id": "RHSA-2019:1172", "href": "https://access.redhat.com/errata/RHSA-2019:1172", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:37", "description": "Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T19:37:13", "type": "redhat", "title": "(RHSA-2019:1195) Important: qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T19:44:56", "id": "RHSA-2019:1195", "href": "https://access.redhat.com/errata/RHSA-2019:1195", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:39:37", "description": "The kernel-rt packages provide the Real Time Linux Kernel, which enables fine-tuning for systems with extremely high determinism requirements.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:22:02", "type": "redhat", "title": "(RHSA-2019:1174) Important: kernel-rt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:02:20", "id": "RHSA-2019:1174", "href": "https://access.redhat.com/errata/RHSA-2019:1174", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:29", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:24:28", "type": "redhat", "title": "(RHSA-2019:1180) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:08:16", "id": "RHSA-2019:1180", "href": "https://access.redhat.com/errata/RHSA-2019:1180", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:21", "description": "The kernel-rt packages provide the Real Time Linux Kernel, which enables fine-tuning for systems with extremely high determinism requirements.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:23:50", "type": "redhat", "title": "(RHSA-2019:1176) Important: kernel-rt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:23:10", "id": "RHSA-2019:1176", "href": "https://access.redhat.com/errata/RHSA-2019:1176", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:12", "description": "The kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T19:37:08", "type": "redhat", "title": "(RHSA-2019:1196) Important: kernel security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T19:44:57", "id": "RHSA-2019:1196", "href": "https://access.redhat.com/errata/RHSA-2019:1196", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:38:24", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:23:25", "type": "redhat", "title": "(RHSA-2019:1177) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:23:11", "id": "RHSA-2019:1177", "href": "https://access.redhat.com/errata/RHSA-2019:1177", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:40:03", "description": "KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm-rhev packages provide the user-space component for running virtual machines that use KVM in environments managed by Red Hat products.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:23:37", "type": "redhat", "title": "(RHSA-2019:1179) Important: qemu-kvm-rhev security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:23:10", "id": "RHSA-2019:1179", "href": "https://access.redhat.com/errata/RHSA-2019:1179", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:07", "description": "Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T18:08:42", "type": "redhat", "title": "(RHSA-2019:1183) Important: qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:50:05", "id": "RHSA-2019:1183", "href": "https://access.redhat.com/errata/RHSA-2019:1183", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:36:32", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T18:09:20", "type": "redhat", "title": "(RHSA-2019:1184) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:49:10", "id": "RHSA-2019:1184", "href": "https://access.redhat.com/errata/RHSA-2019:1184", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:39:37", "description": "Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T18:09:34", "type": "redhat", "title": "(RHSA-2019:1185) Important: qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:49:04", "id": "RHSA-2019:1185", "href": "https://access.redhat.com/errata/RHSA-2019:1185", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:35:38", "description": "The kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nBug Fix(es):\n\n* rwsem in inconsistent state leading system to hung (BZ#1690320)\n\n* iscsi driver can block reboot/shutdown (BZ#1693340)\n\n* ovl_create can return positive retval and crash the host (BZ#1696289)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:13:04", "type": "redhat", "title": "(RHSA-2019:1171) Important: kernel security and bug fix update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:32:20", "id": "RHSA-2019:1171", "href": "https://access.redhat.com/errata/RHSA-2019:1171", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:36:34", "description": "The RHV-M Virtual Appliance automates the process of installing and configuring the Red Hat Virtualization Manager. The appliance is available to download as an OVA file from the Customer Portal.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:38:48", "type": "redhat", "title": "(RHSA-2019:1208) Important: rhvm-appliance security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T21:03:01", "id": "RHSA-2019:1208", "href": "https://access.redhat.com/errata/RHSA-2019:1208", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:36:36", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:17:03", "type": "redhat", "title": "(RHSA-2019:1194) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:20:48", "id": "RHSA-2019:1194", "href": "https://access.redhat.com/errata/RHSA-2019:1194", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:38:58", "description": "The redhat-virtualization-host packages provide the Red Hat Virtualization Host. These packages include redhat-release-virtualization-host, ovirt-node, and rhev-hypervisor. Red Hat Virtualization Hosts (RHVH) are installed using a special build of Red Hat Enterprise Linux with only the packages required to host virtual machines. RHVH features a Cockpit user interface for monitoring the host's resources and performing administrative tasks. \n\nThe ovirt-node-ng packages provide the Red Hat Virtualization Host. These packages include redhat-release-virtualization-host, ovirt-node, and rhev-hypervisor. Red Hat Virtualization Hosts (RHVH) are installed using a special build of Red Hat Enterprise Linux with only the packages required to host virtual machines. RHVH features a Cockpit user interface for monitoring the host's resources and performing administrative tasks.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:38:39", "type": "redhat", "title": "(RHSA-2019:1209) Important: redhat-virtualization-host security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T21:03:02", "id": "RHSA-2019:1209", "href": "https://access.redhat.com/errata/RHSA-2019:1209", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:38:00", "description": "The redhat-virtualization-host packages provide the Red Hat Virtualization Host. These packages include redhat-release-virtualization-host, ovirt-node, and rhev-hypervisor. Red Hat Virtualization Hosts (RHVH) are installed using a special build of Red Hat Enterprise Linux with only the packages required to host virtual machines. RHVH features a Cockpit user interface for monitoring the host's resources and performing administrative tasks. \n\nThe ovirt-node-ng packages provide the Red Hat Virtualization Host. These packages include redhat-release-virtualization-host, ovirt-node, and rhev-hypervisor. Red Hat Virtualization Hosts (RHVH) are installed using a special build of Red Hat Enterprise Linux with only the packages required to host virtual machines. RHVH features a Cockpit user interface for monitoring the host's resources and performing administrative tasks.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:38:29", "type": "redhat", "title": "(RHSA-2019:1207) Important: redhat-virtualization-host security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T21:03:00", "id": "RHSA-2019:1207", "href": "https://access.redhat.com/errata/RHSA-2019:1207", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:39:04", "description": "KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm-rhev packages provide the user-space component for running virtual machines that use KVM in environments managed by Red Hat products.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:39:17", "type": "redhat", "title": "(RHSA-2019:1200) Important: qemu-kvm-rhev security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:42:23", "id": "RHSA-2019:1200", "href": "https://access.redhat.com/errata/RHSA-2019:1200", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:04", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:13:20", "type": "redhat", "title": "(RHSA-2019:1186) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:32:17", "id": "RHSA-2019:1186", "href": "https://access.redhat.com/errata/RHSA-2019:1186", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:57", "description": "Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:13:36", "type": "redhat", "title": "(RHSA-2019:1188) Important: qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:32:19", "id": "RHSA-2019:1188", "href": "https://access.redhat.com/errata/RHSA-2019:1188", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:36:50", "description": "The kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T19:36:58", "type": "redhat", "title": "(RHSA-2019:1193) Important: kernel security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T19:44:58", "id": "RHSA-2019:1193", "href": "https://access.redhat.com/errata/RHSA-2019:1193", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:39:57", "description": "Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:24:34", "type": "redhat", "title": "(RHSA-2019:1181) Important: qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:08:12", "id": "RHSA-2019:1181", "href": "https://access.redhat.com/errata/RHSA-2019:1181", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:38:29", "description": "The kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T18:08:40", "type": "redhat", "title": "(RHSA-2019:1155) Important: kernel security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:50:09", "id": "RHSA-2019:1155", "href": "https://access.redhat.com/errata/RHSA-2019:1155", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:58", "description": "Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:23:31", "type": "redhat", "title": "(RHSA-2019:1178) Important: qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:23:09", "id": "RHSA-2019:1178", "href": "https://access.redhat.com/errata/RHSA-2019:1178", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:38:52", "description": "The VDSM service is required by a Virtualization Manager to manage the Linux hosts. VDSM manages and monitors the host's storage, memory and networks as well as virtual machine creation, other host administration tasks, statistics gathering, and log collection.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:37:52", "type": "redhat", "title": "(RHSA-2019:1203) Important: vdsm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T21:02:56", "id": "RHSA-2019:1203", "href": "https://access.redhat.com/errata/RHSA-2019:1203", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:37", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T18:08:34", "type": "redhat", "title": "(RHSA-2019:1182) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:50:07", "id": "RHSA-2019:1182", "href": "https://access.redhat.com/errata/RHSA-2019:1182", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}], "checkpoint_security": [{"lastseen": "2023-03-17T06:06:01", "description": "Symptoms\n\n * Researchers have released information about several vulnerabilities in Intel processors: \nUnder certain conditions, data in microarchitectural structures that the currently-running software does not have permission to access may be speculatively accessed by faulting or assisting load or store operations. This does not result in incorrect program execution because these operations never complete, and their results are never returned to software. \nHowever, software may be able to forward this speculative-only data to a side channel disclosure gadget in a way that potentially allows malicious actors to infer the data. \nFor more information see: [Microarchitectural Data Sampling / CVE-2018-12126 , CVE-2018-12127,CVE-2018-12130,CVE-2019-11091 / INTEL-SA-00233](<https://software.intel.com/security-software-guidance/software-guidance/microarchitectural-data-sampling>)\n\nSolution\n\nThere is no added risk to Check Point appliances.\n", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-05-15T20:26:43", "type": "checkpoint_security", "title": "Check Point Response to Intel Microarchitectural Data Sampling Vulnerabilities (Fallout, RIDL, Zombieload) (CVE-2018-12126 , CVE-2018-12127, CVE-2018-12130, CVE-2019-11091)", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-15T20:26:43", "id": "CPS:SK153672", "href": "https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk153672", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}], "suse": [{"lastseen": "2022-04-18T12:42:01", "description": "An update that fixes four vulnerabilities is now available.\n\nDescription:\n\n This update for ucode-intel fixes the following issues:\n\n This update contains the Intel QSR 2019.1 Microcode release (boo#1111331\n CVE-2018-12126 CVE-2018-12130 CVE-2018-12127 CVE-2019-11091)\n\n Release notes:\n\n - Processor Identifier Version Products\n - Model Stepping F-MO-S/PI Old->New\n - ---- new platforms ----------------------------------------\n - CLX-SP B1 6-55-7/bf 05000021 Xeon Scalable Gen2\n - ---- updated platforms ------------------------------------\n - SNB D2/G1/Q0 6-2a-7/12 0000002e->0000002f Core Gen2\n - IVB E1/L1 6-3a-9/12 00000020->00000021 Core Gen3\n - HSW C0 6-3c-3/32 00000025->00000027 Core Gen4\n - BDW-U/Y E0/F0 6-3d-4/c0 0000002b->0000002d Core Gen5\n - IVB-E/EP C1/M1/S1 6-3e-4/ed 0000042e->0000042f Core Gen3 X Series;\n Xeon E5 v2\n - IVB-EX D1 6-3e-7/ed 00000714->00000715 Xeon E7 v2\n - HSX-E/EP Cx/M1 6-3f-2/6f 00000041->00000043 Core Gen4 X series;\n Xeon E5 v3\n - HSX-EX E0 6-3f-4/80 00000013->00000014 Xeon E7 v3\n - HSW-U C0/D0 6-45-1/72 00000024->00000025 Core Gen4\n - HSW-H C0 6-46-1/32 0000001a->0000001b Core Gen4\n - BDW-H/E3 E0/G0 6-47-1/22 0000001e->00000020 Core Gen5\n - SKL-U/Y D0/K1 6-4e-3/c0 000000c6->000000cc Core Gen6\n - SKX-SP H0/M0/U0 6-55-4/b7 0200005a->0000005e Xeon Scalable\n - SKX-D M1 6-55-4/b7 0200005a->0000005e Xeon D-21xx\n - BDX-DE V1 6-56-2/10 00000019->0000001a Xeon D-1520/40\n - BDX-DE V2/3 6-56-3/10 07000016->07000017 Xeon\n D-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19\n - BDX-DE Y0 6-56-4/10 0f000014->0f000015 Xeon\n D-1557/59/67/71/77/81/87\n - BDX-NS A0 6-56-5/10 0e00000c->0e00000d Xeon\n D-1513N/23/33/43/53\n - APL D0 6-5c-9/03 00000036->00000038 Pentium N/J4xxx,\n Celeron N/J3xxx, Atom x5/7-E39xx\n - SKL-H/S R0/N0 6-5e-3/36 000000c6->000000cc Core Gen6; Xeon E3 v5\n - DNV B0 6-5f-1/01 00000024->0000002e Atom Processor C\n Series\n - GLK B0 6-7a-1/01 0000002c->0000002e Pentium Silver\n N/J5xxx, Celeron N/J4xxx\n - AML-Y22 H0 6-8e-9/10 0000009e->000000b4 Core Gen8 Mobile\n - KBL-U/Y H0 6-8e-9/c0 0000009a->000000b4 Core Gen7 Mobile\n - CFL-U43e D0 6-8e-a/c0 0000009e->000000b4 Core Gen8 Mobile\n - WHL-U W0 6-8e-b/d0 000000a4->000000b8 Core Gen8 Mobile\n - WHL-U V0 6-8e-d/94 000000b2->000000b8 Core Gen8 Mobile\n - KBL-G/H/S/E3 B0 6-9e-9/2a 0000009a->000000b4 Core Gen7; Xeon E3 v6\n - CFL-H/S/E3 U0 6-9e-a/22 000000aa->000000b4 Core Gen8 Desktop,\n Mobile, Xeon E\n - CFL-S B0 6-9e-b/02 000000aa->000000b4 Core Gen8\n - CFL-H/S P0 6-9e-c/22 000000a2->000000ae Core Gen9\n - CFL-H R0 6-9e-d/22 000000b0->000000b8 Core Gen9 Mobile\n\n It also contains the update to 20190312 release (boo#1129231):\n\n - Processor Identifier Version Products\n - Model Stepping F-MO-S/PI Old->New\n - ---- new platforms ----------------------------------------\n - AML-Y22 H0 6-8e-9/10 0000009e Core Gen8 Mobile\n - WHL-U W0 6-8e-b/d0 000000a4 Core Gen8 Mobile\n - WHL-U V0 6-8e-d/94 000000b2 Core Gen8 Mobile\n - CFL-S P0 6-9e-c/22 000000a2 Core Gen9 Desktop\n - CFL-H R0 6-9e-d/22 000000b0 Core Gen9 Mobile\n - ---- updated platforms ------------------------------------\n - HSX-E/EP Cx/M1 6-3f-2/6f 0000003d->00000041 Core Gen4 X series;\n Xeon E5 v3\n - HSX-EX E0 6-3f-4/80 00000012->00000013 Xeon E7 v3\n - SKX-SP H0/M0/U0 6-55-4/b7 0200004d->0000005a Xeon Scalable\n - SKX-D M1 6-55-4/b7 0200004d->0000005a Xeon D-21xx\n - BDX-DE V1 6-56-2/10 00000017->00000019 Xeon D-1520/40\n - BDX-DE V2/3 6-56-3/10 07000013->07000016 Xeon\n D-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19\n - BDX-DE Y0 6-56-4/10 0f000012->0f000014 Xeon\n D-1557/59/67/71/77/81/87\n - BDX-NS A0 6-56-5/10 0e00000a->0e00000c Xeon\n D-1513N/23/33/43/53\n - APL D0 6-5c-9/03 00000032->00000036 Pentium N/J4xxx,\n Celeron N/J3xxx, Atom x5/7-E39xx\n - APL E0 6-5c-a/03 0000000c->00000010 Atom x5/7-E39xx\n - GLK B0 6-7a-1/01 00000028->0000002c Pentium Silver\n N/J5xxx, Celeron N/J4xxx\n - KBL-U/Y H0 6-8e-9/c0 0000008e->0000009a Core Gen7 Mobile\n - CFL-U43e D0 6-8e-a/c0 00000096->0000009e Core Gen8 Mobile\n - KBL-H/S/E3 B0 6-9e-9/2a 0000008e->0000009a Core Gen7; Xeon E3 v6\n - CFL-H/S/E3 U0 6-9e-a/22 00000096->000000aa Core Gen8 Desktop,\n Mobile, Xeon E\n - CFL-S B0 6-9e-b/02 0000008e->000000aa Core Gen8\n\n And it also contains the update to 20180807a, no change except licensing.\n (boo#1104479).\n\n\nPatch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended installation methods\n like YaST online_update or \"zypper patch\".\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 42.3:\n\n zypper in -t patch openSUSE-2019-1408=1", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-05-20T00:00:00", "type": "suse", "title": "Security update for ucode-intel (important)", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-20T00:00:00", "id": "OPENSUSE-SU-2019:1408-1", "href": "https://lists.opensuse.org/archives/list/security-announce@lists.opensuse.org/thread/ZSE72NMUCLWUM5YDC3SFM4F3IBT36O4H/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-04-18T12:42:01", "description": "An update that fixes four vulnerabilities is now available.\n\nDescription:\n\n This update for ucode-intel fixes the following issues:\n\n This update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the CPU Microcode adjustments for the software\n mitigations.\n\n For more information on this set of vulnerabilities, check out\n https://www.suse.com/support/kb/doc/?id=7023736\n\n\n Release notes:\n\n - Processor Identifier Version Products\n - Model Stepping F-MO-S/PI Old->New\n - ---- new platforms ----------------------------------------\n - CLX-SP B1 6-55-7/bf 05000021 Xeon Scalable Gen2\n - ---- updated platforms ------------------------------------\n - SNB D2/G1/Q0 6-2a-7/12 0000002e->0000002f Core Gen2\n - IVB E1/L1 6-3a-9/12 00000020->00000021 Core Gen3\n - HSW C0 6-3c-3/32 00000025->00000027 Core Gen4\n - BDW-U/Y E0/F0 6-3d-4/c0 0000002b->0000002d Core Gen5\n - IVB-E/EP C1/M1/S1 6-3e-4/ed 0000042e->0000042f Core Gen3 X Series;\n Xeon E5 v2\n - IVB-EX D1 6-3e-7/ed 00000714->00000715 Xeon E7 v2\n - HSX-E/EP Cx/M1 6-3f-2/6f 00000041->00000043 Core Gen4 X series;\n Xeon E5 v3\n - HSX-EX E0 6-3f-4/80 00000013->00000014 Xeon E7 v3\n - HSW-U C0/D0 6-45-1/72 00000024->00000025 Core Gen4\n - HSW-H C0 6-46-1/32 0000001a->0000001b Core Gen4\n - BDW-H/E3 E0/G0 6-47-1/22 0000001e->00000020 Core Gen5\n - SKL-U/Y D0/K1 6-4e-3/c0 000000c6->000000cc Core Gen6\n - SKX-SP H0/M0/U0 6-55-4/b7 0200005a->0000005e Xeon Scalable\n - SKX-D M1 6-55-4/b7 0200005a->0000005e Xeon D-21xx\n - BDX-DE V1 6-56-2/10 00000019->0000001a Xeon D-1520/40\n - BDX-DE V2/3 6-56-3/10 07000016->07000017 Xeon\n D-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19\n - BDX-DE Y0 6-56-4/10 0f000014->0f000015 Xeon\n D-1557/59/67/71/77/81/87\n - BDX-NS A0 6-56-5/10 0e00000c->0e00000d Xeon\n D-1513N/23/33/43/53\n - APL D0 6-5c-9/03 00000036->00000038 Pentium N/J4xxx,\n Celeron N/J3xxx, Atom x5/7-E39xx\n - SKL-H/S R0/N0 6-5e-3/36 000000c6->000000cc Core Gen6; Xeon E3 v5\n - DNV B0 6-5f-1/01 00000024->0000002e Atom Processor C\n Series\n - GLK B0 6-7a-1/01 0000002c->0000002e Pentium Silver\n N/J5xxx, Celeron N/J4xxx\n - AML-Y22 H0 6-8e-9/10 0000009e->000000b4 Core Gen8 Mobile\n - KBL-U/Y H0 6-8e-9/c0 0000009a->000000b4 Core Gen7 Mobile\n - CFL-U43e D0 6-8e-a/c0 0000009e->000000b4 Core Gen8 Mobile\n - WHL-U W0 6-8e-b/d0 000000a4->000000b8 Core Gen8 Mobile\n - WHL-U V0 6-8e-d/94 000000b2->000000b8 Core Gen8 Mobile\n - KBL-G/H/S/E3 B0 6-9e-9/2a 0000009a->000000b4 Core Gen7; Xeon E3 v6\n - CFL-H/S/E3 U0 6-9e-a/22 000000aa->000000b4 Core Gen8 Desktop,\n Mobile, Xeon E\n - CFL-S B0 6-9e-b/02 000000aa->000000b4 Core Gen8\n - CFL-H/S P0 6-9e-c/22 000000a2->000000ae Core Gen9\n - CFL-H R0 6-9e-d/22 000000b0->000000b8 Core Gen9 Mobile\n\n This update was imported from the SUSE:SLE-15:Update update project.\n\n\nPatch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended installation methods\n like YaST online_update or \"zypper patch\".\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1402=1", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-05-16T00:00:00", "type": "suse", "title": "Security update for ucode-intel (important)", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-16T00:00:00", "id": "OPENSUSE-SU-2019:1402-1", "href": "https://lists.opensuse.org/archives/list/security-announce@lists.opensuse.org/thread/33MA77JSUFVKUR6Z5BDK3Q5WJV5TLMGX/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-04-18T12:42:01", "description": "An update that solves four vulnerabilities and has three\n fixes is now available.\n\nDescription:\n\n This update for xen fixes the following issues:\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the XEN Hypervisor adjustments, that additionaly\n also use CPU Microcode updates.\n\n The mitigation can be controlled via the \"mds\" commandline option, see the\n documentation.\n\n For more information on this set of vulnerabilities, check out\n https://www.suse.com/support/kb/doc/?id=7023736\n\n Other fixes:\n\n - Added code to change LIBXL_HOTPLUG_TIMEOUT at runtime.\n\n The included README has details about the impact of this change\n (bsc#1120095)\n\n - Fixes in Live migrating PV domUs\n\n An earlier change broke live migration of PV domUs without a device\n model. The migration would stall for 10 seconds while the domU was paused,\n which caused network connections to drop. Fix this by tracking the need\n for a device model within libxl. (bsc#1079730, bsc#1098403, bsc#1111025)\n\n - Libvirt segfault when crash triggered on top of HVM guest (bsc#1120067)\n\n This update was imported from the SUSE:SLE-15:Update update project.\n\n\nPatch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended installation methods\n like YaST online_update or \"zypper patch\".\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1403=1", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-05-16T00:00:00", "type": "suse", "title": "Security update for xen (important)", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-16T00:00:00", "id": "OPENSUSE-SU-2019:1403-1", "href": "https://lists.opensuse.org/archives/list/security-announce@lists.opensuse.org/thread/VXQE4RWMS56TBCJGRYUPTRMOPKA4W36G/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-04-18T12:41:57", "description": "An update that fixes four vulnerabilities is now available.\n\nDescription:\n\n This update for libvirt fixes the following issues:\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n - CVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the libvirt adjustments, that pass through the new\n 'md-clear' CPU flag (bsc#1135273).\n\n For more information on this set of vulnerabilities, check out\n https://www.suse.com/support/kb/doc/?id=7023736\n\n This update was imported from the SUSE:SLE-15:Update update project.\n\n\nPatch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended installation methods\n like YaST online_update or \"zypper patch\".\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1505=1", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-06-03T00:00:00", "type": "suse", "title": "Security update for libvirt (important)", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-06-03T00:00:00", "id": "OPENSUSE-SU-2019:1505-1", "href": "https://lists.opensuse.org/archives/list/security-announce@lists.opensuse.org/thread/EXK6FJ36C5QT4K2AAY7SESWBHLXITKIA/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-11-06T19:35:56", "description": "An update that fixes four vulnerabilities is now available.\n\nDescription:\n\n This update for ucode-intel fixes the following issues:\n\n This update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the CPU Microcode adjustments for the software\n mitigations.\n\n For more information on this set of vulnerabilities, check out\n https://www.suse.com/support/kb/doc/?id=7023736\n\n Release notes:\n\n ---- updated platforms ------------------------------------ SNB-E/EN/EP\n C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X SNB-E/EN/EP\n C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\n ---- new platforms ---------------------------------------- VLV\n C0 6-37-8/02 00000838 Atom Z series VLV C0\n 6-37-8/0C 00000838 Celeron N2xxx, Pentium N35xx VLV\n D0 6-37-9/0F 0000090c Atom E38xx CHV C0\n 6-4c-3/01 00000368 Atom X series CHV D0\n 6-4c-4/01 00000411 Atom X series Readded what missing in last\n update: BDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4;\n Core i7-69xx/68xx\n\n This update was imported from the SUSE:SLE-15-SP1:Update update project.\n\n\nPatch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended installation methods\n like YaST online_update or \"zypper patch\".\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.1:\n\n zypper in -t patch openSUSE-2019-1806=1", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-07-24T00:00:00", "type": "suse", "title": "Security update for ucode-intel (important)", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-07-24T00:00:00", "id": "OPENSUSE-SU-2019:1806-1", "href": "https://lists.opensuse.org/archives/list/security-announce@lists.opensuse.org/thread/C57DILLST76FNAJLKX2HCZ5LXACTE6OS/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-04-18T12:42:01", "description": "An update that fixes four vulnerabilities is now available.\n\nDescription:\n\n This update for ucode-intel fixes the following issues:\n\n The Intel CPU Microcode was updated to the official QSR 2019.1 Microcode\n release (bsc#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127\n CVE-2019-11091)\n\n ---- new platforms ---------------------------------------- VLV\n C0 6-37-8/02 00000838 Atom Z series VLV C0\n 6-37-8/0C 00000838 Celeron N2xxx, Pentium N35xx VLV\n D0 6-37-9/0F 0000090c Atom E38xx CHV C0\n 6-4c-3/01 00000368 Atom X series CHV D0\n 6-4c-4/01 00000411 Atom X series\n\n Readded missing in last update:\n\n BDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core\n i7-69xx/68xx\n\n This update was imported from the SUSE:SLE-15:Update update project.\n\n\nPatch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended installation methods\n like YaST online_update or \"zypper patch\".\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1468=1", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-05-28T00:00:00", "type": "suse", "title": "Security update for ucode-intel (important)", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-28T00:00:00", "id": "OPENSUSE-SU-2019:1468-1", "href": "https://lists.opensuse.org/archives/list/security-announce@lists.opensuse.org/thread/7TYDM6JT7REGY5GWV2QCHLGWEXWMFQXU/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}], "virtuozzo": [{"lastseen": "2021-07-28T14:20:38", "description": "This update provides a new kernel 2.6.32-042stab138.1 for Virtuozzo Containers for Linux 4.7 and Server Bare Metal 5.0 based on the RHEL 6.10 kernel 2.6.32-754.14.2.el6. The new kernel inherits security fixes for the Microarchitectural Store Buffer Data (MDS) vulnerability from the RHEL kernel.\n**Vulnerability id:** CVE-2018-12130\nA flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n\n**Vulnerability id:** CVE-2018-12126\nModern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer.\n\n**Vulnerability id:** CVE-2018-12127\nMicroprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel.\n\n**Vulnerability id:** CVE-2019-11091\nUncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n\n", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-16T00:00:00", "type": "virtuozzo", "title": "Important kernel security update: New kernel 2.6.32-042stab138.1 for Virtuozzo Containers for Linux 4.7, Server Bare Metal 5.0", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-05-16T00:00:00", "id": "VZA-2019-036", "href": "https://help.virtuozzo.com/s/article/VZA-2019-036", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-07-28T14:20:52", "description": "This update provides a new kernel 2.6.32-042stab138.1 for Virtuozzo 6.0 based on the RHEL 6.10 kernel 2.6.32-754.14.2.el6. The new kernel inherits security fixes for the Microarchitectural Store Buffer Data (MDS) vulnerability from the RHEL kernel.\n**Vulnerability id:** CVE-2018-12130\nA flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n\n**Vulnerability id:** CVE-2018-12126\nModern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer.\n\n**Vulnerability id:** CVE-2018-12127\nMicroprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel.\n\n**Vulnerability id:** CVE-2019-11091\nUncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n\n", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-16T00:00:00", "type": "virtuozzo", "title": "Important kernel security update: New kernel 2.6.32-042stab138.1; Virtuozzo 6.0 Update 12 Hotfix 40 (6.0.12-3739)", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-05-16T00:00:00", "id": "VZA-2019-037", "href": "https://help.virtuozzo.com/s/article/VZA-2019-037", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}], "oraclelinux": [{"lastseen": "2021-07-28T14:24:32", "description": "[0.10.2-64.0.1]\n- Replace docs/et.png in tarball with blank image\n[0.10.2-64.el6_10.1]\n- cpu_x86: Do not cache microcode version (CVE-2018-12126, CVE-2018-12130, CVE-2018-12127)\n- cpu_map: Define md-clear CPUID bit (CVE-2018-12126, CVE-2018-12130, CVE-2018-12127)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T00:00:00", "type": "oraclelinux", "title": "libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T00:00:00", "id": "ELSA-2019-1180", "href": "http://linux.oracle.com/errata/ELSA-2019-1180.html", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-07-28T14:25:07", "description": "[2.6.32-754.14.2.OL6]\n- Update genkey [bug 25599697]\n[2.6.32-754.14.2]\n- [x86] x86/speculation/mds: Add SMT warning message (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add mds=full, nosmt cmdline option (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation: Remove redundant arch_smt_update() invocation (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/spec_ctrl: Add debugfs x86/smt_present file (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/spec_ctrl: Update MDS mitigation status after late microcode load (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [documentation] Documentation: Add MDS vulnerability documentation (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [documentation] Documentation: Move L1TF to separate directory (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add mitigation mode VMWERV (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add sysfs reporting for MDS (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add mitigation control for MDS (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Conditionally clear CPU buffers on idle entry (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [kvm] x86/kvm/vmx: Add MDS protection when L1D Flush is not active (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Clear CPU buffers on exit to user (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add mds_clear_cpu_buffers() (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [kvm] x86/kvm: Expose X86_FEATURE_MD_CLEAR to guests (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add BUG_MSBDS_ONLY (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add basic bug infrastructure for MDS (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation: Consolidate CPU whitelists (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/l1tf: Show actual SMT state (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation: Simplify sysfs report of VMX L1TF vulnerability (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/cpu: Sanitize FAM6_ATOM naming (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [kernel] sched/smt: Provide sched_smt_active() (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation: Provide arch_smt_update() (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/mm: Fix compilation warning in pgtable_types.h (Waiman Long) [1692386 1692387 1692388] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n[2.6.32-754.14.1]\n- [s390] kernel: Add crypto card toleration support (Hendrik Brueckner) [1695496]\n[2.6.32-754.13.1]\n- [fs] ext4: Fix data corruption caused by unaligned direct AIO (Lukas Czerner) [1686170]", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T00:00:00", "type": "oraclelinux", "title": "kernel security and bug fix update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T00:00:00", "id": "ELSA-2019-1169", "href": "http://linux.oracle.com/errata/ELSA-2019-1169.html", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-07-28T14:24:46", "description": "[4.18.0-80.1.2_0.OL8]\n- Oracle Linux certificates (Alexey Petrenko)\n- Oracle Linux RHCK Module Signing Key was added to the kernel trusted keys list (olkmod_signing_key.pem) [Orabug: 29539237]\n- Update x509.genkey [Orabug: 24817676]\n[4.18.0-80.1.2_0]\n- [arm64] arm64/speculation: Support 'mitigations=' cmdline option (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [s390] s390/speculation: Support 'mitigations=' cmdline option (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [powerpc] powerpc/speculation: Support 'mitigations=' cmdline option (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [powerpc] powerpc/64: Disable the speculation barrier from the command line (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Add 'mitigations=' support for MDS (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation: Support 'mitigations=' cmdline option (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [kernel] cpu/speculation: Add 'mitigations=' cmdline option (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Print SMT vulnerable on MSBDS with mitigations off (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Fix comment (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Add SMT warning message (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation: Move arch_smt_update() call to after mitigation decisions (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Add mds=full, nosmt cmdline option (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [documentation] Documentation: Add MDS vulnerability documentation (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [documentation] Documentation: Move L1TF to separate directory (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Add mitigation mode VMWERV (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Add sysfs reporting for MDS (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Add mitigation control for MDS (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Conditionally clear CPU buffers on idle entry (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/kvm/vmx: Add MDS protection when L1D Flush is not active (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Clear CPU buffers on exit to user (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Add mds_clear_cpu_buffers() (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [kvm] x86/kvm: Expose X86_FEATURE_MD_CLEAR to guests (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Add BUG_MSBDS_ONLY (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation/mds: Add basic bug infrastructure for MDS (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation: Consolidate CPU whitelists (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/msr-index: Cleanup bit defines (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/speculation: Cast ~SPEC_CTRL_STIBP atomic value to int (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [x86] x86/cpu: Sanitize FAM6_ATOM naming (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\nfile (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n- [tools] tools include: Adopt linux/bits.h (Josh Poimboeuf) [1698809 1698896 1699001 1690338 1690360 1690351] {CVE-2018-12130 CVE-2018-12127 CVE-2018-12126}\n[4.18.0-80.1.1_0]\n- [zstream] switch to zstream (Frantisek Hrbata)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-07-30T00:00:00", "type": "oraclelinux", "title": "kernel security and bug fix update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-07-30T00:00:00", "id": "ELSA-2019-1167", "href": "http://linux.oracle.com/errata/ELSA-2019-1167.html", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-07-28T14:25:16", "description": "[3.10.0-957.12.2.OL7]\n- Oracle Linux certificates (Alexey Petrenko)\n- Oracle Linux RHCK Module Signing Key was compiled into kernel (olkmod_signing_key.x509)(alexey.petrenko@oracle.com)\n- Update x509.genkey [bug 24817676]\n[3.10.0-957.12.2]\n- [x86] x86/speculation/mds: Add SMT warning message (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation: Move arch_smt_update() call to after mitigation decisions (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [documentation] x86/speculation/mds: Add mds=full,nosmt cmdline option (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [kernel] x86/speculation: Remove redundant arch_smt_update() invocation (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/spec_ctrl: Update MDS mitigation status after late microcode load (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/spec_ctrl: Add debugfs x86/smt_present file (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/spec_ctrl: Disable automatic enabling of STIBP with SMT on (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [documentation] Documentation: Add MDS vulnerability documentation (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [documentation] Documentation: Move L1TF to separate directory (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add mitigation mode VMWERV (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [base] x86/speculation/mds: Add sysfs reporting for MDS (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add mitigation control for MDS (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Conditionally clear CPU buffers on idle entry (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [kvm] x86/kvm/vmx: Add MDS protection when L1D Flush is not active (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Clear CPU buffers on exit to user (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add mds_clear_cpu_buffers() (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}\n- [kvm] x86/kvm: Expose X86_FEATURE_MD_CLEAR to guests (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add BUG_MSBDS_ONLY (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation/mds: Add basic bug infrastructure for MDS (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}\n- [x86] x86/speculation: Consolidate CPU whitelists (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/msr-index: Cleanup bit defines (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}\n- [x86] x86/l1tf: Show actual SMT state (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}\n- [x86] x86/speculation: Simplify sysfs report of VMX L1TF vulnerability (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}\n- [x86] x86/speculation: Rework SMT state change (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}\n- [kernel] sched/smt: Expose sched_smt_present static key (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}\n- [kernel] sched/smt: Make sched_smt_present track topology (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}\n- [x86] x86/speculation: Disable STIBP when enhanced IBRS is in use (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}\n- [x86] x86/speculation: Move STIPB/IBPB string conditionals out of cpu_show_common() (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/spectre_v2: Make spectre_v2_mitigation mode available (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/spec_ctrl: Add X86_FEATURE_USE_IBPB (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12127 CVE-2018-12130}\n- [x86] x86/spec_ctrl: Add casting to fix compilation error (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}\n- [x86] x86/cpu: Sanitize FAM6_ATOM naming (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}\n- [x86] x86/cpufeatures: Add Intel PCONFIG cpufeature (Waiman Long) [1692597 1692598 1692599 1690335 1690348 1690358] {CVE-2018-12126 CVE-2018-12130 CVE-2018-12127}", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-15T00:00:00", "type": "oraclelinux", "title": "kernel security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-15T00:00:00", "id": "ELSA-2019-1168", "href": "http://linux.oracle.com/errata/ELSA-2019-1168.html", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-07-28T14:24:25", "description": "[1.5.3-160.el7_6.2]\n- kvm-target-i386-define-md-clear-bit-rhel.patch\n- Resolves: bz#1693216\n (qemu-kvm: hardware: Microarchitectural Store Buffer Data Sampling)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-15T00:00:00", "type": "oraclelinux", "title": "qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-15T00:00:00", "id": "ELSA-2019-1178", "href": "http://linux.oracle.com/errata/ELSA-2019-1178.html", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}], "nessus": [{"lastseen": "2023-01-11T14:51:14", "description": "The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in the SUSE-SU-2019:14048-1 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2021-06-10T00:00:00", "type": "nessus", "title": "SUSE SLES11 Security Update : microcode_ctl (SUSE-SU-2019:14048-1)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:microcode_ctl", "cpe:/o:novell:suse_linux:11"], "id": "SUSE_SU-2019-14048-1.NASL", "href": "https://www.tenable.com/plugins/nessus/150546", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The package checks in this plugin were extracted from\n# SUSE update advisory SUSE-SU-2019:14048-1. The text itself\n# is copyright (C) SUSE.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(150546);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"SuSE\", value:\"SUSE-SU-2019:14048-1\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"SUSE SLES11 Security Update : microcode_ctl (SUSE-SU-2019:14048-1)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in\nthe SUSE-SU-2019:14048-1 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1111331\");\n # https://lists.suse.com/pipermail/sle-security-updates/2019-May/005455.html\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?ddc44404\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12126\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12127\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12130\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2019-11091\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected microcode_ctl package.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2021/06/10\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:microcode_ctl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:11\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2021-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('misc_func.inc');\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'SUSE');\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLES11)$\", string:os_ver)) audit(AUDIT_OS_NOT, 'SUSE SLES11', 'SUSE ' + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'SUSE ' + os_ver, cpu);\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES11\" && (! preg(pattern:\"^(4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES11 SP4\", os_ver + \" SP\" + sp);\n\npkgs = [\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'i586', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'i586', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'}\n];\n\nflag = 0;\nforeach package_array ( pkgs ) {\n reference = NULL;\n release = NULL;\n sp = NULL;\n cpu = NULL;\n exists_check = NULL;\n rpm_spec_vers_cmp = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (reference && release && exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n else if (reference && release) {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n}\n\nif (flag)\n{\n ltss_plugin_caveat = '\\n' +\n 'NOTE: This vulnerability check contains fixes that apply to\\n' +\n 'packages only available in SUSE Enterprise Linux Server LTSS\\n' +\n 'repositories. Access to these package security updates require\\n' +\n 'a paid SUSE LTSS subscription.\\n';\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + ltss_plugin_caveat\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'microcode_ctl');\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T14:50:06", "description": "The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in the SUSE-SU-2019:14133-1 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2021-06-10T00:00:00", "type": "nessus", "title": "SUSE SLES11 Security Update : microcode_ctl (SUSE-SU-2019:14133-1)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:microcode_ctl", "cpe:/o:novell:suse_linux:11"], "id": "SUSE_SU-2019-14133-1.NASL", "href": "https://www.tenable.com/plugins/nessus/150530", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The package checks in this plugin were extracted from\n# SUSE update advisory SUSE-SU-2019:14133-1. The text itself\n# is copyright (C) SUSE.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(150530);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"SuSE\", value:\"SUSE-SU-2019:14133-1\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"SUSE SLES11 Security Update : microcode_ctl (SUSE-SU-2019:14133-1)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in\nthe SUSE-SU-2019:14133-1 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1111331\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1141977\");\n # https://lists.suse.com/pipermail/sle-security-updates/2019-July/005743.html\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?a4918484\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12126\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12127\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12130\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2019-11091\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected microcode_ctl package.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/23\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2021/06/10\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:microcode_ctl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:11\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2021-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('misc_func.inc');\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'SUSE');\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLES11)$\", string:os_ver)) audit(AUDIT_OS_NOT, 'SUSE SLES11', 'SUSE ' + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'SUSE ' + os_ver, cpu);\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES11\" && (! preg(pattern:\"^(4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES11 SP4\", os_ver + \" SP\" + sp);\n\npkgs = [\n {'reference':'microcode_ctl-1.17-102.83.41', 'sp':'4', 'cpu':'i586', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.41', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.41', 'sp':'4', 'cpu':'i586', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.41', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'}\n];\n\nflag = 0;\nforeach package_array ( pkgs ) {\n reference = NULL;\n release = NULL;\n sp = NULL;\n cpu = NULL;\n exists_check = NULL;\n rpm_spec_vers_cmp = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (reference && release && exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n else if (reference && release) {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n}\n\nif (flag)\n{\n ltss_plugin_caveat = '\\n' +\n 'NOTE: This vulnerability check contains fixes that apply to\\n' +\n 'packages only available in SUSE Enterprise Linux Server LTSS\\n' +\n 'repositories. Access to these package security updates require\\n' +\n 'a paid SUSE LTSS subscription.\\n';\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + ltss_plugin_caveat\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'microcode_ctl');\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:24", "description": "This update for ucode-intel fixes the following issues :\n\nThe Intel CPU Microcode was updated to the official QSR 2019.1 Microcode release (bsc#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127 CVE-2019-11091)\n\n---- new platforms ---------------------------------------- VLV C0 6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron N2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0 6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X series\n\nReadded missing in last update :\n\nBDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core i7-69xx/68xx\n\nThis update was imported from the SUSE:SLE-15:Update update project.", "cvss3": {}, "published": "2019-05-29T00:00:00", "type": "nessus", "title": "openSUSE Security Update : ucode-intel (openSUSE-2019-1468) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-19T00:00:00", "cpe": ["p-cpe:/a:novell:opensuse:ucode-intel", "cpe:/o:novell:opensuse:15.0"], "id": "OPENSUSE-2019-1468.NASL", "href": "https://www.tenable.com/plugins/nessus/125534", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from openSUSE Security Update openSUSE-2019-1468.\n#\n# The text description of this plugin is (C) SUSE LLC.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125534);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/19\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"openSUSE Security Update : ucode-intel (openSUSE-2019-1468) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Check for the openSUSE-2019-1468 patch\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote openSUSE host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"This update for ucode-intel fixes the following issues :\n\nThe Intel CPU Microcode was updated to the official QSR 2019.1\nMicrocode release (bsc#1111331 CVE-2018-12126 CVE-2018-12130\nCVE-2018-12127 CVE-2019-11091)\n\n---- new platforms ---------------------------------------- VLV C0\n6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron\nN2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0\n6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X\nseries\n\nReadded missing in last update :\n\nBDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core\ni7-69xx/68xx\n\nThis update was imported from the SUSE:SLE-15:Update update project.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected ucode-intel package.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:opensuse:15.0\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/28\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/29\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release =~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"openSUSE\");\nif (release !~ \"^(SUSE15\\.0)$\") audit(AUDIT_OS_RELEASE_NOT, \"openSUSE\", \"15.0\", release);\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nourarch = get_kb_item(\"Host/cpu\");\nif (!ourarch) audit(AUDIT_UNKNOWN_ARCH);\nif (ourarch !~ \"^(x86_64)$\") audit(AUDIT_ARCH_NOT, \"x86_64\", ourarch);\n\nflag = 0;\n\nif ( rpm_check(release:\"SUSE15.0\", reference:\"ucode-intel-20190514-lp150.2.21.1\") ) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:24", "description": "This update for xen fixes the following issues :\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the XEN Hypervisor adjustments, that additionaly also use CPU Microcode updates.\n\nThe mitigation can be controlled via the 'mds' commandline option, see the documentation.\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nOther fixes :\n\n - Added code to change LIBXL_HOTPLUG_TIMEOUT at runtime.\n\n The included README has details about the impact of this change (bsc#1120095)\n\n - Fixes in Live migrating PV domUs\n\n An earlier change broke live migration of PV domUs without a device model. The migration would stall for 10 seconds while the domU was paused, which caused network connections to drop. Fix this by tracking the need for a device model within libxl. (bsc#1079730, bsc#1098403, bsc#1111025)\n\n - Libvirt segfault when crash triggered on top of HVM guest (bsc#1120067)\n\nThis update was imported from the SUSE:SLE-15:Update update project.", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "nessus", "title": "openSUSE Security Update : xen (openSUSE-2019-1403) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-19T00:00:00", "cpe": ["p-cpe:/a:novell:opensuse:xen", "p-cpe:/a:novell:opensuse:xen-debugsource", "p-cpe:/a:novell:opensuse:xen-devel", "p-cpe:/a:novell:opensuse:xen-doc-html", "p-cpe:/a:novell:opensuse:xen-libs", "p-cpe:/a:novell:opensuse:xen-libs-32bit", "p-cpe:/a:novell:opensuse:xen-libs-32bit-debuginfo", "p-cpe:/a:novell:opensuse:xen-libs-debuginfo", "p-cpe:/a:novell:opensuse:xen-tools", "p-cpe:/a:novell:opensuse:xen-tools-debuginfo", "p-cpe:/a:novell:opensuse:xen-tools-domU", "p-cpe:/a:novell:opensuse:xen-tools-domU-debuginfo", "cpe:/o:novell:opensuse:15.0"], "id": "OPENSUSE-2019-1403.NASL", "href": "https://www.tenable.com/plugins/nessus/125242", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from openSUSE Security Update openSUSE-2019-1403.\n#\n# The text description of this plugin is (C) SUSE LLC.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125242);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/19\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"openSUSE Security Update : xen (openSUSE-2019-1403) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Check for the openSUSE-2019-1403 patch\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote openSUSE host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"This update for xen fixes the following issues :\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data\n Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data\n Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data\n Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling\n Uncacheable Memory (MDSUM)\n\nThese updates contain the XEN Hypervisor adjustments, that additionaly\nalso use CPU Microcode updates.\n\nThe mitigation can be controlled via the 'mds' commandline option, see\nthe documentation.\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nOther fixes :\n\n - Added code to change LIBXL_HOTPLUG_TIMEOUT at runtime.\n\n The included README has details about the impact of this\n change (bsc#1120095)\n\n - Fixes in Live migrating PV domUs\n\n An earlier change broke live migration of PV domUs\n without a device model. The migration would stall for 10\n seconds while the domU was paused, which caused network\n connections to drop. Fix this by tracking the need for a\n device model within libxl. (bsc#1079730, bsc#1098403,\n bsc#1111025)\n\n - Libvirt segfault when crash triggered on top of HVM\n guest (bsc#1120067)\n\nThis update was imported from the SUSE:SLE-15:Update update project.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1027519\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1079730\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1098403\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111025\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1120067\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1120095\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/support/kb/doc/?id=7023736\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected xen packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-doc-html\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-libs-32bit\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-libs-32bit-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-libs-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-tools-domU\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:xen-tools-domU-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:opensuse:15.0\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/17\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release =~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"openSUSE\");\nif (release !~ \"^(SUSE15\\.0)$\") audit(AUDIT_OS_RELEASE_NOT, \"openSUSE\", \"15.0\", release);\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nourarch = get_kb_item(\"Host/cpu\");\nif (!ourarch) audit(AUDIT_UNKNOWN_ARCH);\nif (ourarch !~ \"^(i586|i686|x86_64)$\") audit(AUDIT_ARCH_NOT, \"i586 / i686 / x86_64\", ourarch);\n\nflag = 0;\n\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-debugsource-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-devel-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-libs-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-libs-debuginfo-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-tools-domU-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"xen-tools-domU-debuginfo-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-doc-html-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-libs-32bit-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-libs-32bit-debuginfo-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-tools-4.10.3_04-lp150.2.19.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"xen-tools-debuginfo-4.10.3_04-lp150.2.19.1\") ) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"xen / xen-debugsource / xen-devel / xen-doc-html / xen-libs / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:18:13", "description": "This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the new 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nThis update was imported from the SUSE:SLE-15:Update update project.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-06-04T00:00:00", "type": "nessus", "title": "openSUSE Security Update : libvirt (openSUSE-2019-1505) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:novell:opensuse:libvirt", "p-cpe:/a:novell:opensuse:libvirt-admin", "p-cpe:/a:novell:opensuse:libvirt-admin-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-client", "p-cpe:/a:novell:opensuse:libvirt-client-32bit-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-client-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon", "p-cpe:/a:novell:opensuse:libvirt-daemon-config-network", "p-cpe:/a:novell:opensuse:libvirt-daemon-config-nwfilter", "p-cpe:/a:novell:opensuse:libvirt-daemon-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-interface", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-interface-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-libxl", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-libxl-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-lxc", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-lxc-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-network", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-network-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-nodedev", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-nodedev-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-nwfilter", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-nwfilter-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-qemu", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-qemu-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-secret", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-secret-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-core", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-core-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-disk", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-disk-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-iscsi-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-logical", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-logical-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-mpath-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-rbd-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-scsi-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-uml", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-uml-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-vbox", "p-cpe:/a:novell:opensuse:libvirt-daemon-driver-vbox-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-daemon-hooks", "p-cpe:/a:novell:opensuse:libvirt-daemon-lxc", "p-cpe:/a:novell:opensuse:libvirt-daemon-qemu", "p-cpe:/a:novell:opensuse:libvirt-daemon-uml", "p-cpe:/a:novell:opensuse:libvirt-daemon-vbox", "p-cpe:/a:novell:opensuse:libvirt-daemon-xen", "p-cpe:/a:novell:opensuse:libvirt-debugsource", "p-cpe:/a:novell:opensuse:libvirt-devel", "p-cpe:/a:novell:opensuse:libvirt-devel-32bit", "p-cpe:/a:novell:opensuse:libvirt-libs", "p-cpe:/a:novell:opensuse:libvirt-libs-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-lock-sanlock", "p-cpe:/a:novell:opensuse:libvirt-lock-sanlock-debuginfo", "p-cpe:/a:novell:opensuse:libvirt-nss", "p-cpe:/a:novell:opensuse:libvirt-nss-debuginfo", "p-cpe:/a:novell:opensuse:wireshark-plugin-libvirt", "p-cpe:/a:novell:opensuse:wireshark-plugin-libvirt-debuginfo", "cpe:/o:novell:opensuse:15.0"], "id": "OPENSUSE-2019-1505.NASL", "href": "https://www.tenable.com/plugins/nessus/125701", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from openSUSE Security Update openSUSE-2019-1505.\n#\n# The text description of this plugin is (C) SUSE LLC.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125701);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"openSUSE Security Update : libvirt (openSUSE-2019-1505) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote openSUSE host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data\n Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data\n Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data\n Sampling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling\n Uncacheable Memory (MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the\nnew 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nThis update was imported from the SUSE:SLE-15:Update update project.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111331\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1135273\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/support/kb/doc/?id=7023736\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected libvirt packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/06/03\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/06/04\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-admin-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-client-32bit-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-client-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-interface-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-libxl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-libxl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-lxc-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-network-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-nodedev-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-nwfilter-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-qemu-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-secret-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-core-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-disk-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-iscsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-logical-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-mpath-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-rbd-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-storage-scsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-uml\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-uml-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-vbox\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-driver-vbox-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-hooks\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-uml\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-vbox\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-daemon-xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-devel-32bit\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-libs-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-lock-sanlock-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:libvirt-nss-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:wireshark-plugin-libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:wireshark-plugin-libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:opensuse:15.0\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release =~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"openSUSE\");\nif (release !~ \"^(SUSE15\\.0)$\") audit(AUDIT_OS_RELEASE_NOT, \"openSUSE\", \"15.0\", release);\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nourarch = get_kb_item(\"Host/cpu\");\nif (!ourarch) audit(AUDIT_UNKNOWN_ARCH);\nif (ourarch !~ \"^(i586|i686|x86_64)$\") audit(AUDIT_ARCH_NOT, \"i586 / i686 / x86_64\", ourarch);\n\nflag = 0;\n\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-admin-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-admin-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-client-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-client-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-config-network-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-config-nwfilter-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-interface-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-interface-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-lxc-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-lxc-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-network-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-network-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-nodedev-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-nodedev-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-nwfilter-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-nwfilter-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-qemu-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-qemu-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-secret-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-secret-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-core-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-core-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-disk-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-disk-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-iscsi-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-iscsi-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-logical-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-logical-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-mpath-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-mpath-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-scsi-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-storage-scsi-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-uml-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-uml-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-vbox-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-driver-vbox-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-hooks-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-lxc-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-qemu-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-uml-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-daemon-vbox-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-debugsource-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-devel-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-libs-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-libs-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-lock-sanlock-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-lock-sanlock-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-nss-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"libvirt-nss-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"wireshark-plugin-libvirt-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", reference:\"wireshark-plugin-libvirt-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"libvirt-client-32bit-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-debuginfo-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"libvirt-daemon-xen-4.0.0-lp150.7.14.1\") ) flag++;\nif ( rpm_check(release:\"SUSE15.0\", cpu:\"x86_64\", reference:\"libvirt-devel-32bit-4.0.0-lp150.7.14.1\") ) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-admin / libvirt-admin-debuginfo / libvirt-client / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:23", "description": "Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan Horea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss discovered that memory previously stored in microarchitectural fill buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information.\n(CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered that memory previously stored in microarchitectural load ports of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel Moghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel Gruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory previously stored in microarchitectural store buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur, Moritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered that uncacheable memory previously stored in microarchitectural buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2019-11091).\n\nNote that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Ubuntu 16.04 LTS / 18.04 LTS / 18.10 / 19.04 : libvirt update (USN-3985-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:canonical:ubuntu_linux:libvirt-bin", "p-cpe:/a:canonical:ubuntu_linux:libvirt-clients", "p-cpe:/a:canonical:ubuntu_linux:libvirt-daemon", "p-cpe:/a:canonical:ubuntu_linux:libvirt0", "cpe:/o:canonical:ubuntu_linux:16.04", "cpe:/o:canonical:ubuntu_linux:18.04:-:lts", "cpe:/o:canonical:ubuntu_linux:18.10", "cpe:/o:canonical:ubuntu_linux:19.04"], "id": "UBUNTU_USN-3985-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125215", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Ubuntu Security Notice USN-3985-1. The text \n# itself is copyright (C) Canonical, Inc. See \n# <http://www.ubuntu.com/usn/>. Ubuntu(R) is a registered \n# trademark of Canonical, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125215);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"USN\", value:\"3985-1\");\n\n script_name(english:\"Ubuntu 16.04 LTS / 18.04 LTS / 18.10 / 19.04 : libvirt update (USN-3985-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks dpkg output for updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Ubuntu host is missing one or more security-related\npatches.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi\nMaisuradze, Dan Horea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan\nvan Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, Cristiano Giuffrida, Moritz Lipp, Michael\nSchwarz, and Daniel Gruss discovered that memory previously stored in\nmicroarchitectural fill buffers of an Intel CPU core may be exposed to\na malicious process that is executing on the same CPU core. A local\nattacker could use this to expose sensitive information.\n(CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco,\nStephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro\nFrigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered\nthat memory previously stored in microarchitectural load ports of an\nIntel CPU core may be exposed to a malicious process that is executing\non the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin,\nDaniel Moghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel\nGenkin, Daniel Gruss, Berk Sunar, Frank Piessens, and Yuval Yarom\ndiscovered that memory previously stored in microarchitectural store\nbuffers of an Intel CPU core may be exposed to a malicious process\nthat is executing on the same CPU core. A local attacker could use\nthis to expose sensitive information. (CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert\nBos, and Cristiano Giuffrida discovered that uncacheable memory\npreviously stored in microarchitectural buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same\nCPU core. A local attacker could use this to expose sensitive\ninformation. (CVE-2019-11091).\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the Ubuntu security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://usn.ubuntu.com/3985-1/\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libvirt-bin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libvirt-clients\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libvirt0\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:16.04\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:18.04:-:lts\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:18.10\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:19.04\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"Ubuntu Security Notice (C) 2019-2020 Canonical, Inc. / NASL script (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Ubuntu Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/cpu\", \"Host/Ubuntu\", \"Host/Ubuntu/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"ubuntu.inc\");\ninclude(\"misc_func.inc\");\n\nif ( ! get_kb_item(\"Host/local_checks_enabled\") ) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/Ubuntu/release\");\nif ( isnull(release) ) audit(AUDIT_OS_NOT, \"Ubuntu\");\nrelease = chomp(release);\nif (! preg(pattern:\"^(16\\.04|18\\.04|18\\.10|19\\.04)$\", string:release)) audit(AUDIT_OS_NOT, \"Ubuntu 16.04 / 18.04 / 18.10 / 19.04\", \"Ubuntu \" + release);\nif ( ! get_kb_item(\"Host/Debian/dpkg-l\") ) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Ubuntu\", cpu);\n\nflag = 0;\n\nif (ubuntu_check(osver:\"16.04\", pkgname:\"libvirt-bin\", pkgver:\"1.3.1-1ubuntu10.26\")) flag++;\nif (ubuntu_check(osver:\"16.04\", pkgname:\"libvirt0\", pkgver:\"1.3.1-1ubuntu10.26\")) flag++;\nif (ubuntu_check(osver:\"18.04\", pkgname:\"libvirt-clients\", pkgver:\"4.0.0-1ubuntu8.10\")) flag++;\nif (ubuntu_check(osver:\"18.04\", pkgname:\"libvirt-daemon\", pkgver:\"4.0.0-1ubuntu8.10\")) flag++;\nif (ubuntu_check(osver:\"18.04\", pkgname:\"libvirt0\", pkgver:\"4.0.0-1ubuntu8.10\")) flag++;\nif (ubuntu_check(osver:\"18.10\", pkgname:\"libvirt-clients\", pkgver:\"4.6.0-2ubuntu3.5\")) flag++;\nif (ubuntu_check(osver:\"18.10\", pkgname:\"libvirt-daemon\", pkgver:\"4.6.0-2ubuntu3.5\")) flag++;\nif (ubuntu_check(osver:\"18.10\", pkgname:\"libvirt0\", pkgver:\"4.6.0-2ubuntu3.5\")) flag++;\nif (ubuntu_check(osver:\"19.04\", pkgname:\"libvirt-clients\", pkgver:\"5.0.0-1ubuntu2.1\")) flag++;\nif (ubuntu_check(osver:\"19.04\", pkgname:\"libvirt-daemon\", pkgver:\"5.0.0-1ubuntu2.1\")) flag++;\nif (ubuntu_check(osver:\"19.04\", pkgname:\"libvirt0\", pkgver:\"5.0.0-1ubuntu2.1\")) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : ubuntu_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = ubuntu_pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt-bin / libvirt-clients / libvirt-daemon / libvirt0\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:35", "description": "Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan Horea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss discovered that memory previously stored in microarchitectural fill buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information.\n(CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered that memory previously stored in microarchitectural load ports of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel Moghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel Gruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory previously stored in microarchitectural store buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur, Moritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered that uncacheable memory previously stored in microarchitectural buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2019-11091).\n\nNote that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "nessus", "title": "Ubuntu 14.04 LTS : libvirt update (USN-3985-2) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-17T00:00:00", "cpe": ["p-cpe:/a:canonical:ubuntu_linux:libvirt-bin", "p-cpe:/a:canonical:ubuntu_linux:libvirt0", "cpe:/o:canonical:ubuntu_linux:14.04"], "id": "UBUNTU_USN-3985-2.NASL", "href": "https://www.tenable.com/plugins/nessus/125251", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Ubuntu Security Notice USN-3985-2. The text \n# itself is copyright (C) Canonical, Inc. See \n# <http://www.ubuntu.com/usn/>. Ubuntu(R) is a registered \n# trademark of Canonical, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125251);\n script_version(\"1.1\");\n script_cvs_date(\"Date: 2019/05/17 9:44:15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"USN\", value:\"3985-2\");\n\n script_name(english:\"Ubuntu 14.04 LTS : libvirt update (USN-3985-2) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks dpkg output for updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Ubuntu host is missing one or more security-related\npatches.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi\nMaisuradze, Dan Horea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan\nvan Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, Cristiano Giuffrida, Moritz Lipp, Michael\nSchwarz, and Daniel Gruss discovered that memory previously stored in\nmicroarchitectural fill buffers of an Intel CPU core may be exposed to\na malicious process that is executing on the same CPU core. A local\nattacker could use this to expose sensitive information.\n(CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco,\nStephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro\nFrigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered\nthat memory previously stored in microarchitectural load ports of an\nIntel CPU core may be exposed to a malicious process that is executing\non the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin,\nDaniel Moghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel\nGenkin, Daniel Gruss, Berk Sunar, Frank Piessens, and Yuval Yarom\ndiscovered that memory previously stored in microarchitectural store\nbuffers of an Intel CPU core may be exposed to a malicious process\nthat is executing on the same CPU core. A local attacker could use\nthis to expose sensitive information. (CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert\nBos, and Cristiano Giuffrida discovered that uncacheable memory\npreviously stored in microarchitectural buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same\nCPU core. A local attacker could use this to expose sensitive\ninformation. (CVE-2019-11091).\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the Ubuntu security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://usn.ubuntu.com/3985-2/\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected libvirt-bin and / or libvirt0 packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:L/Au:S/C:C/I:N/A:N\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libvirt-bin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libvirt0\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:14.04\");\n\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/17\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"Ubuntu Security Notice (C) 2019 Canonical, Inc. / NASL script (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Ubuntu Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/cpu\", \"Host/Ubuntu\", \"Host/Ubuntu/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"ubuntu.inc\");\ninclude(\"misc_func.inc\");\n\nif ( ! get_kb_item(\"Host/local_checks_enabled\") ) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/Ubuntu/release\");\nif ( isnull(release) ) audit(AUDIT_OS_NOT, \"Ubuntu\");\nrelease = chomp(release);\nif (! ereg(pattern:\"^(14\\.04)$\", string:release)) audit(AUDIT_OS_NOT, \"Ubuntu 14.04\", \"Ubuntu \" + release);\nif ( ! get_kb_item(\"Host/Debian/dpkg-l\") ) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Ubuntu\", cpu);\n\nflag = 0;\n\nif (ubuntu_check(osver:\"14.04\", pkgname:\"libvirt-bin\", pkgver:\"1.2.2-0ubuntu13.1.28\")) flag++;\nif (ubuntu_check(osver:\"14.04\", pkgname:\"libvirt0\", pkgver:\"1.2.2-0ubuntu13.1.28\")) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : ubuntu_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = ubuntu_pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt-bin / libvirt0\");\n}\n", "cvss": {"score": 4.6, "vector": "AV:L/AC:L/Au:S/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:54", "description": "Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan Horea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss discovered that memory previously stored in microarchitectural fill buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information.\n(CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered that memory previously stored in microarchitectural load ports of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel Moghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel Gruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory previously stored in microarchitectural store buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur, Moritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered that uncacheable memory previously stored in microarchitectural buffers of an Intel CPU core may be exposed to a malicious process that is executing on the same CPU core. A local attacker could use this to expose sensitive information. (CVE-2019-11091).\n\nNote that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Ubuntu 14.04 LTS : linux vulnerabilities (USN-3983-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-16T00:00:00", "cpe": ["p-cpe:/a:canonical:ubuntu_linux:linux-image-3.13-generic", "p-cpe:/a:canonical:ubuntu_linux:linux-image-3.13-generic-lpae", "p-cpe:/a:canonical:ubuntu_linux:linux-image-3.13-lowlatency", "p-cpe:/a:canonical:ubuntu_linux:linux-image-generic", "p-cpe:/a:canonical:ubuntu_linux:linux-image-generic-lpae", "p-cpe:/a:canonical:ubuntu_linux:linux-image-lowlatency", "p-cpe:/a:canonical:ubuntu_linux:linux-image-virtual", "cpe:/o:canonical:ubuntu_linux:14.04"], "id": "UBUNTU_USN-3983-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125145", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Ubuntu Security Notice USN-3983-1. The text \n# itself is copyright (C) Canonical, Inc. See \n# <http://www.ubuntu.com/usn/>. Ubuntu(R) is a registered \n# trademark of Canonical, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125145);\n script_version(\"1.2\");\n script_cvs_date(\"Date: 2019/05/16 10:38:54\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"USN\", value:\"3983-1\");\n\n script_name(english:\"Ubuntu 14.04 LTS : linux vulnerabilities (USN-3983-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks dpkg output for updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Ubuntu host is missing one or more security-related\npatches.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi\nMaisuradze, Dan Horea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan\nvan Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, Cristiano Giuffrida, Moritz Lipp, Michael\nSchwarz, and Daniel Gruss discovered that memory previously stored in\nmicroarchitectural fill buffers of an Intel CPU core may be exposed to\na malicious process that is executing on the same CPU core. A local\nattacker could use this to expose sensitive information.\n(CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco,\nStephan van Schaik, Alyssa Milburn, Sebastian Osterlund, Pietro\nFrigo, Kaveh Razavi, Herbert Bos, and Cristiano Giuffrida discovered\nthat memory previously stored in microarchitectural load ports of an\nIntel CPU core may be exposed to a malicious process that is executing\non the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin,\nDaniel Moghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel\nGenkin, Daniel Gruss, Berk Sunar, Frank Piessens, and Yuval Yarom\ndiscovered that memory previously stored in microarchitectural store\nbuffers of an Intel CPU core may be exposed to a malicious process\nthat is executing on the same CPU core. A local attacker could use\nthis to expose sensitive information. (CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian Osterlund, Pietro Frigo, Kaveh Razavi, Herbert\nBos, and Cristiano Giuffrida discovered that uncacheable memory\npreviously stored in microarchitectural buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same\nCPU core. A local attacker could use this to expose sensitive\ninformation. (CVE-2019-11091).\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the Ubuntu security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://usn.ubuntu.com/3983-1/\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:L/Au:S/C:C/I:N/A:N\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:linux-image-3.13-generic\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:linux-image-3.13-generic-lpae\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:linux-image-3.13-lowlatency\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:linux-image-generic\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:linux-image-generic-lpae\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:linux-image-lowlatency\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:linux-image-virtual\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:14.04\");\n\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"Ubuntu Security Notice (C) 2019 Canonical, Inc. / NASL script (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Ubuntu Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/cpu\", \"Host/Ubuntu\", \"Host/Ubuntu/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"ubuntu.inc\");\ninclude(\"ksplice.inc\");\n\nif ( ! get_kb_item(\"Host/local_checks_enabled\") ) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/Ubuntu/release\");\nif ( isnull(release) ) audit(AUDIT_OS_NOT, \"Ubuntu\");\nrelease = chomp(release);\nif (! ereg(pattern:\"^(14\\.04)$\", string:release)) audit(AUDIT_OS_NOT, \"Ubuntu 14.04\", \"Ubuntu \" + release);\nif ( ! get_kb_item(\"Host/Debian/dpkg-l\") ) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Ubuntu\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for USN-3983-1\");\n }\n else\n {\n _ubuntu_report = ksplice_reporting_text();\n }\n}\n\nflag = 0;\n\nif (ubuntu_check(osver:\"14.04\", pkgname:\"linux-image-3.13.0-170-generic\", pkgver:\"3.13.0-170.220\")) flag++;\nif (ubuntu_check(osver:\"14.04\", pkgname:\"linux-image-3.13.0-170-generic-lpae\", pkgver:\"3.13.0-170.220\")) flag++;\nif (ubuntu_check(osver:\"14.04\", pkgname:\"linux-image-3.13.0-170-lowlatency\", pkgver:\"3.13.0-170.220\")) flag++;\nif (ubuntu_check(osver:\"14.04\", pkgname:\"linux-image-generic\", pkgver:\"3.13.0.170.181\")) flag++;\nif (ubuntu_check(osver:\"14.04\", pkgname:\"linux-image-generic-lpae\", pkgver:\"3.13.0.170.181\")) flag++;\nif (ubuntu_check(osver:\"14.04\", pkgname:\"linux-image-lowlatency\", pkgver:\"3.13.0.170.181\")) flag++;\nif (ubuntu_check(osver:\"14.04\", pkgname:\"linux-image-virtual\", pkgver:\"3.13.0.170.181\")) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : ubuntu_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = ubuntu_pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"linux-image-3.13-generic / linux-image-3.13-generic-lpae / etc\");\n}\n", "cvss": {"score": 4.6, "vector": "AV:L/AC:L/Au:S/C:C/I:N/A:N"}}, {"lastseen": "2023-01-12T15:32:48", "description": "The remote host is running a version of RancherOS prior to v1.5.2, hences is exposed to an Information Disclosure Vulnerability. \n\nMicroarchitectural Data Sampling (MDS) is a family of side channel attacks on internal buffers in Intel CPUs.\n(CVE-2018-12126, CVE-2018-12130, CVE-2018-12127, CVE-2019-11091)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-12-19T00:00:00", "type": "nessus", "title": "RancherOS < 1.5.2 Intel Microarchitectural Data Sampling Local Information Disclosure", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["cpe:/o:rancher:rancheros"], "id": "RANCHEROS_1_5_2.NASL", "href": "https://www.tenable.com/plugins/nessus/132256", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# @NOAGENT@\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(132256);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_bugtraq_id(108330);\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"RancherOS < 1.5.2 Intel Microarchitectural Data Sampling Local Information Disclosure\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote device is missing a vendor-supplied security patch\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote host is running a version of RancherOS prior to v1.5.2, hences is\nexposed to an Information Disclosure Vulnerability. \n\nMicroarchitectural Data Sampling (MDS) is a family of side channel attacks on\ninternal buffers in Intel CPUs.\n(CVE-2018-12126, CVE-2018-12130, CVE-2018-12127, CVE-2019-11091)\");\n script_set_attribute(attribute:\"see_also\", value:\"https://rancher.com/docs/os/v1.x/en/about/security/\");\n script_set_attribute(attribute:\"see_also\", value:\"https://github.com/rancher/os/releases/tag/v1.5.2\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.kernel.org/doc/html/latest/x86/mds.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade to RancherOS v1.5.2 or later\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2018-12127\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/31\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/12/19\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:rancher:rancheros\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Misc.\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"os_fingerprint_linux_distro.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RancherOS/version\", \"Host/RancherOS\");\n\n exit(0);\n}\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('misc_func.inc');\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\n# Fix version is v1.5.2\nfix_version = '1.5.2';\nos = get_kb_item('Host/RancherOS');\n\nif (!os) audit(AUDIT_OS_NOT, 'RancherOS');\n\nos_ver = get_kb_item('Host/RancherOS/version');\nif (!os_ver)\n{\n exit(1, 'Could not determine the RancherOS version');\n}\n\nmatch = pregmatch(pattern:\"v([0-9\\.]+)\", string:os_ver);\n\nif (!isnull(match))\n{ \n version = match[1]; \n if (ver_compare(ver:version, fix:fix_version, strict:TRUE) == -1)\n {\n security_report_v4(\n port:0,\n severity:SECURITY_WARNING,\n extra:\n '\\n Installed version : ' + os_ver +\n '\\n Fixed version : v' + fix_version +\n '\\n'\n );\n }\n}\n\naudit(AUDIT_INST_VER_NOT_VULN, 'RancherOS', os_ver);", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:24:50", "description": "The remote NewStart CGSL host, running version CORE 5.04 / MAIN 5.04, has kernel packages installed that are affected by multiple vulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub- operations. These sub-operations allow the processor to hand-off address generation logic into these sub- operations for optimized writes. Both of these sub- operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side- channel. (CVE-2018-12127)\n\n - A flaw was found in the implementation of the fill buffer, a mechanism used by modern CPUs when a cache- miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-08-12T00:00:00", "type": "nessus", "title": "NewStart CGSL CORE 5.04 / MAIN 5.04 : kernel Multiple Vulnerabilities (NS-SA-2019-0078)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": [], "id": "NEWSTART_CGSL_NS-SA-2019-0078_KERNEL.NASL", "href": "https://www.tenable.com/plugins/nessus/127287", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\n# The descriptive text and package checks in this plugin were\n# extracted from ZTE advisory NS-SA-2019-0078. The text\n# itself is copyright (C) ZTE, Inc.\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127287);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"NewStart CGSL CORE 5.04 / MAIN 5.04 : kernel Multiple Vulnerabilities (NS-SA-2019-0078)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote machine is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote NewStart CGSL host, running version CORE 5.04 / MAIN 5.04, has kernel packages installed that are affected by\nmultiple vulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data) sub-\n operations. These sub-operations allow the processor to\n hand-off address generation logic into these sub-\n operations for optimized writes. Both of these sub-\n operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to\n perform load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing side-\n channel. (CVE-2018-12127)\n\n - A flaw was found in the implementation of the fill\n buffer, a mechanism used by modern CPUs when a cache-\n miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"http://security.gd-linux.com/notice/NS-SA-2019-0078\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the vulnerable CGSL kernel packages. Note that updated packages may not be available yet. Please contact ZTE for\nmore information.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"NewStart CGSL Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/ZTE-CGSL/release\", \"Host/ZTE-CGSL/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/ZTE-CGSL/release\");\nif (isnull(release) || release !~ \"^CGSL (MAIN|CORE)\") audit(AUDIT_OS_NOT, \"NewStart Carrier Grade Server Linux\");\n\nif (release !~ \"CGSL CORE 5.04\" &&\n release !~ \"CGSL MAIN 5.04\")\n audit(AUDIT_OS_NOT, 'NewStart CGSL CORE 5.04 / NewStart CGSL MAIN 5.04');\n\nif (!get_kb_item(\"Host/ZTE-CGSL/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"NewStart Carrier Grade Server Linux\", cpu);\n\nflag = 0;\n\npkgs = {\n \"CGSL CORE 5.04\": [\n \"kernel-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-abi-whitelists-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-core-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debug-core-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debug-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debug-devel-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debug-modules-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-debuginfo-common-x86_64-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-devel-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-doc-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-headers-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-modules-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-sign-keys-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-tools-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-tools-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-tools-libs-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"kernel-tools-libs-devel-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"perf-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"perf-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"python-perf-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\",\n \"python-perf-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.332.g0efe8a7.lite\"\n ],\n \"CGSL MAIN 5.04\": [\n \"kernel-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-abi-whitelists-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-debug-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-debug-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-debug-devel-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-debuginfo-common-x86_64-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-devel-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-doc-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-headers-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-sign-keys-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-tools-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-tools-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-tools-libs-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"kernel-tools-libs-devel-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"perf-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"perf-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"python-perf-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\",\n \"python-perf-debuginfo-3.10.0-693.21.1.el7.cgslv5_4.14.329.gc6e0b5d\"\n ]\n};\npkg_list = pkgs[release];\n\nforeach (pkg in pkg_list)\n if (rpm_check(release:\"ZTE \" + release, reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:24:18", "description": "The remote NewStart CGSL host, running version MAIN 4.06, has libvirt packages installed that are affected by multiple vulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub- operations. These sub-operations allow the processor to hand-off address generation logic into these sub- operations for optimized writes. Both of these sub- operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill buffer, a mechanism used by modern CPUs when a cache- miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side- channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-08-12T00:00:00", "type": "nessus", "title": "NewStart CGSL MAIN 4.06 : libvirt Multiple Vulnerabilities (NS-SA-2019-0089)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-06T00:00:00", "cpe": [], "id": "NEWSTART_CGSL_NS-SA-2019-0089_LIBVIRT.NASL", "href": "https://www.tenable.com/plugins/nessus/127306", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\n# The descriptive text and package checks in this plugin were\n# extracted from ZTE advisory NS-SA-2019-0089. The text\n# itself is copyright (C) ZTE, Inc.\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127306);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n\n script_name(english:\"NewStart CGSL MAIN 4.06 : libvirt Multiple Vulnerabilities (NS-SA-2019-0089)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote machine is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote NewStart CGSL host, running version MAIN 4.06, has libvirt packages installed that are affected by multiple\nvulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data) sub-\n operations. These sub-operations allow the processor to\n hand-off address generation logic into these sub-\n operations for optimized writes. Both of these sub-\n operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill\n buffer, a mechanism used by modern CPUs when a cache-\n miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to\n perform load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing side-\n channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"http://security.gd-linux.com/notice/NS-SA-2019-0089\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the vulnerable CGSL libvirt packages. Note that updated packages may not be available yet. Please contact ZTE\nfor more information.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"NewStart CGSL Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/ZTE-CGSL/release\", \"Host/ZTE-CGSL/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/ZTE-CGSL/release\");\nif (isnull(release) || release !~ \"^CGSL (MAIN|CORE)\") audit(AUDIT_OS_NOT, \"NewStart Carrier Grade Server Linux\");\n\nif (release !~ \"CGSL MAIN 4.06\")\n audit(AUDIT_OS_NOT, 'NewStart CGSL MAIN 4.06');\n\nif (!get_kb_item(\"Host/ZTE-CGSL/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"NewStart Carrier Grade Server Linux\", cpu);\n\nflag = 0;\n\npkgs = {\n \"CGSL MAIN 4.06\": [\n \"libvirt-0.10.2-64.el6_10.1\",\n \"libvirt-client-0.10.2-64.el6_10.1\",\n \"libvirt-debuginfo-0.10.2-64.el6_10.1\",\n \"libvirt-devel-0.10.2-64.el6_10.1\",\n \"libvirt-lock-sanlock-0.10.2-64.el6_10.1\",\n \"libvirt-python-0.10.2-64.el6_10.1\"\n ]\n};\npkg_list = pkgs[release];\n\nforeach (pkg in pkg_list)\n if (rpm_check(release:\"ZTE \" + release, reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2023-01-11T15:22:19", "description": "The remote NewStart CGSL host, running version MAIN 4.06, has qemu-kvm packages installed that are affected by multiple vulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub- operations. These sub-operations allow the processor to hand-off address generation logic into these sub- operations for optimized writes. Both of these sub- operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill buffer, a mechanism used by modern CPUs when a cache- miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side- channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.6, "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "version": "3.0", "userInteraction": "NONE"}, "impactScore": 4.0}, "published": "2019-08-12T00:00:00", "type": "nessus", "title": "NewStart CGSL MAIN 4.06 : qemu-kvm Multiple Vulnerabilities (NS-SA-2019-0091)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": [], "id": "NEWSTART_CGSL_NS-SA-2019-0091_QEMU-KVM.NASL", "href": "https://www.tenable.com/plugins/nessus/127311", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\n# The descriptive text and package checks in this plugin were\n# extracted from ZTE advisory NS-SA-2019-0091. The text\n# itself is copyright (C) ZTE, Inc.\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127311);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"NewStart CGSL MAIN 4.06 : qemu-kvm Multiple Vulnerabilities (NS-SA-2019-0091)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote machine is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote NewStart CGSL host, running version MAIN 4.06, has qemu-kvm packages installed that are affected by multiple\nvulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data) sub-\n operations. These sub-operations allow the processor to\n hand-off address generation logic into these sub-\n operations for optimized writes. Both of these sub-\n operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill\n buffer, a mechanism used by modern CPUs when a cache-\n miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to\n perform load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing side-\n channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"http://security.gd-linux.com/notice/NS-SA-2019-0091\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the vulnerable CGSL qemu-kvm packages. Note that updated packages may not be available yet. Please contact ZTE\nfor more information.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"NewStart CGSL Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/ZTE-CGSL/release\", \"Host/ZTE-CGSL/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/ZTE-CGSL/release\");\nif (isnull(release) || release !~ \"^CGSL (MAIN|CORE)\") audit(AUDIT_OS_NOT, \"NewStart Carrier Grade Server Linux\");\n\nif (release !~ \"CGSL MAIN 4.06\")\n audit(AUDIT_OS_NOT, 'NewStart CGSL MAIN 4.06');\n\nif (!get_kb_item(\"Host/ZTE-CGSL/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"NewStart Carrier Grade Server Linux\", cpu);\n\nflag = 0;\n\npkgs = {\n \"CGSL MAIN 4.06\": [\n \"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\",\n \"qemu-img-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-debuginfo-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-tools-0.12.1.2-2.506.el6_10.3\"\n ]\n};\npkg_list = pkgs[release];\n\nforeach (pkg in pkg_list)\n if (rpm_check(release:\"ZTE \" + release, reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-kvm\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "- Microarchitectural Store Buffer Data Sampling (MSBDS) (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS) (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS) (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM) (CVE-2019-11091)\n\nMSBDS leaks Store Buffer Entries which can be speculatively forwarded to a dependent load (store-to-load forwarding) as an optimization. The forward can also happen to a faulting or assisting load operation for a different memory address, which can cause an issue under certain conditions. Store buffers are partitioned between Hyper-Threads so cross thread forwarding is not possible. But if a thread enters or exits a sleep state the store buffer is repartitioned which can expose data from one thread to the other.\n\nMFBDS leaks Fill Buffer Entries. Fill buffers are used internally to manage L1 miss situations and to hold data which is returned or sent in response to a memory or I/O operation. Fill buffers can forward data to a load operation and also write data to the cache. When the fill buffer is deallocated it can retain the stale data of the preceding operations which can then be forwarded to a faulting or assisting load operation, which can cause an issue under certain conditions. Fill buffers are shared between Hyper-Threads so cross thread leakage is possible.\n\nMLDPS leaks Load Port Data. Load ports are used to perform load operations from memory or I/O. The received data is then forwarded to the register file or a subsequent operation. In some implementations the Load Port can contain stale data from a previous operation which can be forwarded to faulting or assisting loads under certain conditions, which again can cause an issue eventually. Load ports are shared between Hyper-Threads so cross thread leakage is possible.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Amazon Linux AMI : kernel (ALAS-2019-1205) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:amazon:linux:kernel", "p-cpe:/a:amazon:linux:kernel-debuginfo", "p-cpe:/a:amazon:linux:kernel-debuginfo-common-i686", "p-cpe:/a:amazon:linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:amazon:linux:kernel-devel", "p-cpe:/a:amazon:linux:kernel-headers", "p-cpe:/a:amazon:linux:kernel-tools", "p-cpe:/a:amazon:linux:kernel-tools-debuginfo", "p-cpe:/a:amazon:linux:kernel-tools-devel", "p-cpe:/a:amazon:linux:perf", "p-cpe:/a:amazon:linux:perf-debuginfo", "cpe:/o:amazon:linux"], "id": "ALA_ALAS-2019-1205.NASL", "href": "https://www.tenable.com/plugins/nessus/125092", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Amazon Linux AMI Security Advisory ALAS-2019-1205.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125092);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"ALAS\", value:\"2019-1205\");\n\n script_name(english:\"Amazon Linux AMI : kernel (ALAS-2019-1205) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Amazon Linux AMI host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\" - Microarchitectural Store Buffer Data Sampling (MSBDS)\n (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS)\n (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS)\n (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM) (CVE-2019-11091)\n\nMSBDS leaks Store Buffer Entries which can be speculatively forwarded\nto a dependent load (store-to-load forwarding) as an optimization. The\nforward can also happen to a faulting or assisting load operation for\na different memory address, which can cause an issue under certain\nconditions. Store buffers are partitioned between Hyper-Threads so\ncross thread forwarding is not possible. But if a thread enters or\nexits a sleep state the store buffer is repartitioned which can expose\ndata from one thread to the other.\n\nMFBDS leaks Fill Buffer Entries. Fill buffers are used internally to\nmanage L1 miss situations and to hold data which is returned or sent\nin response to a memory or I/O operation. Fill buffers can forward\ndata to a load operation and also write data to the cache. When the\nfill buffer is deallocated it can retain the stale data of the\npreceding operations which can then be forwarded to a faulting or\nassisting load operation, which can cause an issue under certain\nconditions. Fill buffers are shared between Hyper-Threads so cross\nthread leakage is possible.\n\nMLDPS leaks Load Port Data. Load ports are used to perform load\noperations from memory or I/O. The received data is then forwarded to\nthe register file or a subsequent operation. In some implementations\nthe Load Port can contain stale data from a previous operation which\ncan be forwarded to faulting or assisting loads under certain\nconditions, which again can cause an issue eventually. Load ports are\nshared between Hyper-Threads so cross thread leakage is possible.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://alas.aws.amazon.com/ALAS-2019-1205.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\n\"Run 'yum update kernel' and reboot your instance to update your\nsystem.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-debuginfo-common-i686\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-tools-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:amazon:linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Amazon Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AmazonLinux/release\", \"Host/AmazonLinux/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/AmazonLinux/release\");\nif (isnull(release) || !strlen(release)) audit(AUDIT_OS_NOT, \"Amazon Linux\");\nos_ver = pregmatch(pattern: \"^AL(A|\\d)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Amazon Linux\");\nos_ver = os_ver[1];\nif (os_ver != \"A\")\n{\n if (os_ver == 'A') os_ver = 'AMI';\n audit(AUDIT_OS_NOT, \"Amazon Linux AMI\", \"Amazon Linux \" + os_ver);\n}\n\nif (!get_kb_item(\"Host/AmazonLinux/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\nflag = 0;\nif (rpm_check(release:\"ALA\", reference:\"kernel-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-debuginfo-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"i686\", reference:\"kernel-debuginfo-common-i686-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-devel-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-headers-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-tools-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-tools-debuginfo-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-tools-devel-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"perf-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"perf-debuginfo-4.14.114-83.126.amzn1\")) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-debuginfo / kernel-debuginfo-common-i686 / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:35", "description": "Define md-clear CPUID bit.\n\nAssuming an updated host kernel and microcode, the md-clear bit will be automatically exposed to guests using the QEMU '-cpu host' arg, or libvirt 'host-model' or 'host-passthrough' configurations.\n\nGuests using a named CPU model it must be manually updated to add this extra CPU feature.\n\nResolves CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091\n\nNote that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website.\nTenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {}, "published": "2019-05-21T00:00:00", "type": "nessus", "title": "Fedora 28 : 2:qemu / libvirt (2019-6e146a714c) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:fedoraproject:fedora:2:qemu", "p-cpe:/a:fedoraproject:fedora:libvirt", "cpe:/o:fedoraproject:fedora:28"], "id": "FEDORA_2019-6E146A714C.NASL", "href": "https://www.tenable.com/plugins/nessus/125299", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Fedora Security Advisory FEDORA-2019-6e146a714c.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125299);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"FEDORA\", value:\"2019-6e146a714c\");\n\n script_name(english:\"Fedora 28 : 2:qemu / libvirt (2019-6e146a714c) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Fedora host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Define md-clear CPUID bit.\n\nAssuming an updated host kernel and microcode, the md-clear bit will\nbe automatically exposed to guests using the QEMU '-cpu host' arg, or\nlibvirt 'host-model' or 'host-passthrough' configurations.\n\nGuests using a named CPU model it must be manually updated to add this\nextra CPU feature.\n\nResolves CVE-2018-12126, CVE-2018-12127, CVE-2018-12130,\nCVE-2019-11091\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the Fedora update system website.\nTenable has attempted to automatically clean and format it as much as\npossible without introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bodhi.fedoraproject.org/updates/FEDORA-2019-6e146a714c\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected 2:qemu and / or libvirt packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fedoraproject:fedora:2:qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fedoraproject:fedora:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:fedoraproject:fedora:28\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/21\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/21\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Fedora Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Fedora\" >!< release) audit(AUDIT_OS_NOT, \"Fedora\");\nos_ver = pregmatch(pattern: \"Fedora.*release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Fedora\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^28([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Fedora 28\", \"Fedora \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Fedora\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"FC28\", reference:\"qemu-2.11.2-5.fc28\", epoch:\"2\")) flag++;\nif (rpm_check(release:\"FC28\", reference:\"libvirt-4.1.0-6.fc28\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"2:qemu / libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:54", "description": "This update for qemu fixes the following issues :\n\n - CVE-2018-12126 CVE-2018-12127 CVE-2018-12130 CVE-2019-11091: Added x86 cpu feature 'md-clear' (bsc#1111331)\n\nThis update was imported from the SUSE:SLE-12-SP3:Update update project.", "cvss3": {}, "published": "2019-05-21T00:00:00", "type": "nessus", "title": "openSUSE Security Update : qemu (openSUSE-2019-1420) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-19T00:00:00", "cpe": ["p-cpe:/a:novell:opensuse:qemu", "p-cpe:/a:novell:opensuse:qemu-arm", "p-cpe:/a:novell:opensuse:qemu-arm-debuginfo", "p-cpe:/a:novell:opensuse:qemu-block-curl", "p-cpe:/a:novell:opensuse:qemu-block-curl-debuginfo", "p-cpe:/a:novell:opensuse:qemu-block-dmg", "p-cpe:/a:novell:opensuse:qemu-block-dmg-debuginfo", "p-cpe:/a:novell:opensuse:qemu-block-iscsi", "p-cpe:/a:novell:opensuse:qemu-block-iscsi-debuginfo", "p-cpe:/a:novell:opensuse:qemu-block-rbd", "p-cpe:/a:novell:opensuse:qemu-block-rbd-debuginfo", "p-cpe:/a:novell:opensuse:qemu-block-ssh", "p-cpe:/a:novell:opensuse:qemu-block-ssh-debuginfo", "p-cpe:/a:novell:opensuse:qemu-debugsource", "p-cpe:/a:novell:opensuse:qemu-extra", "p-cpe:/a:novell:opensuse:qemu-extra-debuginfo", "p-cpe:/a:novell:opensuse:qemu-guest-agent", "p-cpe:/a:novell:opensuse:qemu-guest-agent-debuginfo", "p-cpe:/a:novell:opensuse:qemu-ipxe", "p-cpe:/a:novell:opensuse:qemu-ksm", "p-cpe:/a:novell:opensuse:qemu-kvm", "p-cpe:/a:novell:opensuse:qemu-lang", "p-cpe:/a:novell:opensuse:qemu-linux-user", "p-cpe:/a:novell:opensuse:qemu-linux-user-debuginfo", "p-cpe:/a:novell:opensuse:qemu-linux-user-debugsource", "p-cpe:/a:novell:opensuse:qemu-ppc", "p-cpe:/a:novell:opensuse:qemu-ppc-debuginfo", "p-cpe:/a:novell:opensuse:qemu-s390", "p-cpe:/a:novell:opensuse:qemu-s390-debuginfo", "p-cpe:/a:novell:opensuse:qemu-seabios", "p-cpe:/a:novell:opensuse:qemu-sgabios", "p-cpe:/a:novell:opensuse:qemu-testsuite", "p-cpe:/a:novell:opensuse:qemu-tools", "p-cpe:/a:novell:opensuse:qemu-tools-debuginfo", "p-cpe:/a:novell:opensuse:qemu-vgabios", "p-cpe:/a:novell:opensuse:qemu-x86", "p-cpe:/a:novell:opensuse:qemu-x86-debuginfo", "cpe:/o:novell:opensuse:42.3"], "id": "OPENSUSE-2019-1420.NASL", "href": "https://www.tenable.com/plugins/nessus/125306", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from openSUSE Security Update openSUSE-2019-1420.\n#\n# The text description of this plugin is (C) SUSE LLC.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125306);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/19\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"openSUSE Security Update : qemu (openSUSE-2019-1420) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Check for the openSUSE-2019-1420 patch\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote openSUSE host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"This update for qemu fixes the following issues :\n\n - CVE-2018-12126 CVE-2018-12127 CVE-2018-12130\n CVE-2019-11091: Added x86 cpu feature 'md-clear'\n (bsc#1111331)\n\nThis update was imported from the SUSE:SLE-12-SP3:Update update\nproject.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.opensuse.org/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected qemu packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-arm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-arm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-curl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-dmg\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-dmg-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-iscsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-rbd-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-ssh\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-block-ssh-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-extra-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-guest-agent-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-ipxe\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-ksm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-lang\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-linux-user\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-linux-user-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-linux-user-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-ppc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-ppc-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-s390\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-s390-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-seabios\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-sgabios\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-testsuite\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-vgabios\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-x86\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:opensuse:qemu-x86-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:opensuse:42.3\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/20\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/21\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release =~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"openSUSE\");\nif (release !~ \"^(SUSE42\\.3)$\") audit(AUDIT_OS_RELEASE_NOT, \"openSUSE\", \"42.3\", release);\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nourarch = get_kb_item(\"Host/cpu\");\nif (!ourarch) audit(AUDIT_UNKNOWN_ARCH);\nif (ourarch !~ \"^(i586|i686|x86_64)$\") audit(AUDIT_ARCH_NOT, \"i586 / i686 / x86_64\", ourarch);\n\nflag = 0;\n\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-ipxe-1.0.0+-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-linux-user-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-linux-user-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-linux-user-debugsource-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-seabios-1.10.2-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-sgabios-8-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", reference:\"qemu-vgabios-1.10.2-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-arm-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-arm-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-curl-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-curl-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-dmg-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-dmg-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-iscsi-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-iscsi-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-rbd-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-rbd-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-ssh-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-block-ssh-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-debugsource-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-extra-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-extra-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-guest-agent-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-guest-agent-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-ksm-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-kvm-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-lang-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-ppc-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-ppc-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-s390-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-s390-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-testsuite-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-tools-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-tools-debuginfo-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-x86-2.9.1-62.1\") ) flag++;\nif ( rpm_check(release:\"SUSE42.3\", cpu:\"x86_64\", reference:\"qemu-x86-debuginfo-2.9.1-62.1\") ) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-linux-user / qemu-linux-user-debuginfo / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nBug Fix(es) :\n\n - aio O_DIRECT writes to non-page-aligned file locations on ext4 can result in the overlapped portion of the page containing zeros\n\n - Tolerate new s390x crypto hardware for migration", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : kernel on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:kernel", "p-cpe:/a:fermilab:scientific_linux:kernel-abi-whitelists", "p-cpe:/a:fermilab:scientific_linux:kernel-debug", "p-cpe:/a:fermilab:scientific_linux:kernel-debug-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-debug-devel", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-i686", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:fermilab:scientific_linux:kernel-devel", "p-cpe:/a:fermilab:scientific_linux:kernel-doc", "p-cpe:/a:fermilab:scientific_linux:kernel-firmware", "p-cpe:/a:fermilab:scientific_linux:kernel-headers", "p-cpe:/a:fermilab:scientific_linux:perf", "p-cpe:/a:fermilab:scientific_linux:perf-debuginfo", "p-cpe:/a:fermilab:scientific_linux:python-perf", "p-cpe:/a:fermilab:scientific_linux:python-perf-debuginfo", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_KERNEL_ON_SL6_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125202", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125202);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : kernel on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\n\nBug Fix(es) :\n\n - aio O_DIRECT writes to non-page-aligned file locations\n on ext4 can result in the overlapped portion of the page\n containing zeros\n\n - Tolerate new s390x crypto hardware for migration\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=3706\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?e9696bb0\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-i686\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-firmware\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 6.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL6\", reference:\"kernel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-abi-whitelists-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-debug-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-debug-debuginfo-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-debug-devel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-debuginfo-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-debuginfo-common-i686-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-devel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-doc-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-firmware-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"kernel-headers-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"perf-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"python-perf-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"python-perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:12", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : libvirt on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:libvirt", "p-cpe:/a:fermilab:scientific_linux:libvirt-admin", "p-cpe:/a:fermilab:scientific_linux:libvirt-bash-completion", "p-cpe:/a:fermilab:scientific_linux:libvirt-client", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-config-network", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-interface", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-network", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-secret", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-core", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-disk", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-gluster", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-logical", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-kvm", "p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-lxc", "p-cpe:/a:fermilab:scientific_linux:libvirt-debuginfo", "p-cpe:/a:fermilab:scientific_linux:libvirt-devel", "p-cpe:/a:fermilab:scientific_linux:libvirt-docs", "p-cpe:/a:fermilab:scientific_linux:libvirt-libs", "p-cpe:/a:fermilab:scientific_linux:libvirt-lock-sanlock", "p-cpe:/a:fermilab:scientific_linux:libvirt-login-shell", "p-cpe:/a:fermilab:scientific_linux:libvirt-nss", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_LIBVIRT_ON_SL7_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125205", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125205);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : libvirt on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=2574\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?9751c9a1\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-bash-completion\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-gluster\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-docs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-login-shell\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 7.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-admin-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-bash-completion-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-client-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-network-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-nwfilter-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-gluster-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-kvm-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-lxc-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-debuginfo-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-devel-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-docs-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-libs-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-login-shell-4.5.0-10.el7_6.9\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"libvirt-nss-4.5.0-10.el7_6.9\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-admin / libvirt-bash-completion / libvirt-client / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:33", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : libvirt on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:libvirt", "p-cpe:/a:fermilab:scientific_linux:libvirt-client", "p-cpe:/a:fermilab:scientific_linux:libvirt-debuginfo", "p-cpe:/a:fermilab:scientific_linux:libvirt-devel", "p-cpe:/a:fermilab:scientific_linux:libvirt-lock-sanlock", "p-cpe:/a:fermilab:scientific_linux:libvirt-python", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_LIBVIRT_ON_SL6_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125204", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125204);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : libvirt on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=4100\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?e0b388fd\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:libvirt-python\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 6.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL6\", reference:\"libvirt-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"libvirt-client-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"libvirt-debuginfo-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"libvirt-devel-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"SL6\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-0.10.2-64.el6_10.1\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"libvirt-python-0.10.2-64.el6_10.1\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-client / libvirt-debuginfo / libvirt-devel / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:12", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : kernel on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:bpftool", "p-cpe:/a:fermilab:scientific_linux:kernel", "p-cpe:/a:fermilab:scientific_linux:kernel-abi-whitelists", "p-cpe:/a:fermilab:scientific_linux:kernel-debug", "p-cpe:/a:fermilab:scientific_linux:kernel-debug-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-debug-devel", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:fermilab:scientific_linux:kernel-devel", "p-cpe:/a:fermilab:scientific_linux:kernel-doc", "p-cpe:/a:fermilab:scientific_linux:kernel-headers", "p-cpe:/a:fermilab:scientific_linux:kernel-tools", "p-cpe:/a:fermilab:scientific_linux:kernel-tools-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs", "p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs-devel", "p-cpe:/a:fermilab:scientific_linux:perf", "p-cpe:/a:fermilab:scientific_linux:perf-debuginfo", "p-cpe:/a:fermilab:scientific_linux:python-perf", "p-cpe:/a:fermilab:scientific_linux:python-perf-debuginfo", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_KERNEL_ON_SL7_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125203", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125203);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : kernel on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=3330\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?248977b9\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:bpftool\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 7.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"bpftool-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", reference:\"kernel-abi-whitelists-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debug-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debug-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", reference:\"kernel-doc-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-headers-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"perf-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"perf-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"python-perf-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"bpftool / kernel / kernel-abi-whitelists / kernel-debug / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:23", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : qemu-kvm on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:qemu-guest-agent", "p-cpe:/a:fermilab:scientific_linux:qemu-img", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm-debuginfo", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm-tools", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_QEMU_KVM_ON_SL6_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125206", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125206);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : qemu-kvm on SL6.x i386/x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=4483\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?9b2a45c5\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 6.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL6\", reference:\"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"SL6\", cpu:\"x86_64\", reference:\"qemu-img-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"SL6\", cpu:\"x86_64\", reference:\"qemu-kvm-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"SL6\", reference:\"qemu-kvm-debuginfo-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"SL6\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-0.12.1.2-2.506.el6_10.3\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-guest-agent / qemu-img / qemu-kvm / qemu-kvm-debuginfo / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:36", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : qemu-kvm on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:qemu-img", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm-common", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm-debuginfo", "p-cpe:/a:fermilab:scientific_linux:qemu-kvm-tools", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_QEMU_KVM_ON_SL7_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125207", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125207);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : qemu-kvm on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=2951\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?4873cf7e\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 7.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-160.el7_6.2\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:24", "description": "The remote Oracle Linux 6 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2019-1169 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Oracle Linux 6 : kernel (ELSA-2019-1169)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-09-08T00:00:00", "cpe": ["cpe:/o:oracle:linux:6", "p-cpe:/a:oracle:linux:kernel", "p-cpe:/a:oracle:linux:kernel-abi-whitelists", "p-cpe:/a:oracle:linux:kernel-debug", "p-cpe:/a:oracle:linux:kernel-debug-devel", "p-cpe:/a:oracle:linux:kernel-devel", "p-cpe:/a:oracle:linux:kernel-firmware", "p-cpe:/a:oracle:linux:kernel-headers", "p-cpe:/a:oracle:linux:perf", "p-cpe:/a:oracle:linux:python-perf"], "id": "ORACLELINUX_ELSA-2019-1169.NASL", "href": "https://www.tenable.com/plugins/nessus/125110", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Oracle Linux Security Advisory ELSA-2019-1169.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125110);\n script_version(\"1.8\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/09/08\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"RHSA\", value:\"2019:1169\");\n\n script_name(english:\"Oracle Linux 6 : kernel (ELSA-2019-1169)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Oracle Linux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Oracle Linux 6 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nELSA-2019-1169 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://linux.oracle.com/errata/ELSA-2019-1169.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:6\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-firmware\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:python-perf\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"linux_alt_patch_detect.nasl\", \"ssh_get_info.nasl\");\n script_require_keys(\"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/local_checks_enabled\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('ksplice.inc');\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item('Host/OracleLinux')) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar release = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar os_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Oracle Linux');\nvar os_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'Oracle Linux 6', 'Oracle Linux ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Oracle Linux', cpu);\n\nvar machine_uptrack_level = get_one_kb_item('Host/uptrack-uname-r');\nif (machine_uptrack_level)\n{\n var trimmed_uptrack_level = ereg_replace(string:machine_uptrack_level, pattern:\"\\.(x86_64|i[3-6]86|aarch64)$\", replace:'');\n var fixed_uptrack_levels = ['2.6.32-754.14.2.el6'];\n foreach var fixed_uptrack_level ( fixed_uptrack_levels ) {\n if (rpm_spec_vers_cmp(a:trimmed_uptrack_level, b:fixed_uptrack_level) >= 0)\n {\n audit(AUDIT_PATCH_INSTALLED, 'KSplice hotfix for ELSA-2019-1169');\n }\n }\n __rpm_report = 'Running KSplice level of ' + trimmed_uptrack_level + ' does not meet the minimum fixed level of ' + join(fixed_uptrack_levels, sep:' / ') + ' for this advisory.\\n\\n';\n}\n\nvar kernel_major_minor = get_kb_item('Host/uname/major_minor');\nif (empty_or_null(kernel_major_minor)) exit(1, 'Unable to determine kernel major-minor level.');\nvar expected_kernel_major_minor = '2.6';\nif (kernel_major_minor != expected_kernel_major_minor)\n audit(AUDIT_OS_NOT, 'running kernel level ' + expected_kernel_major_minor + ', it is running kernel level ' + kernel_major_minor);\n\nvar pkgs = [\n {'reference':'kernel-2.6.32-754.14.2.el6', 'cpu':'i686', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-2.6.32'},\n {'reference':'kernel-2.6.32-754.14.2.el6', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-2.6.32'},\n {'reference':'kernel-abi-whitelists-2.6.32-754.14.2.el6', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-abi-whitelists-2.6.32'},\n {'reference':'kernel-debug-2.6.32-754.14.2.el6', 'cpu':'i686', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-debug-2.6.32'},\n {'reference':'kernel-debug-2.6.32-754.14.2.el6', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-debug-2.6.32'},\n {'reference':'kernel-debug-devel-2.6.32-754.14.2.el6', 'cpu':'i686', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-debug-devel-2.6.32'},\n {'reference':'kernel-debug-devel-2.6.32-754.14.2.el6', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-debug-devel-2.6.32'},\n {'reference':'kernel-devel-2.6.32-754.14.2.el6', 'cpu':'i686', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-devel-2.6.32'},\n {'reference':'kernel-devel-2.6.32-754.14.2.el6', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-devel-2.6.32'},\n {'reference':'kernel-firmware-2.6.32-754.14.2.el6', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-firmware-2.6.32'},\n {'reference':'kernel-headers-2.6.32-754.14.2.el6', 'cpu':'i686', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-headers-2.6.32'},\n {'reference':'kernel-headers-2.6.32-754.14.2.el6', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-headers-2.6.32'},\n {'reference':'perf-2.6.32-754.14.2.el6', 'cpu':'i686', 'release':'6', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'perf-2.6.32-754.14.2.el6', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'python-perf-2.6.32-754.14.2.el6', 'cpu':'i686', 'release':'6', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'python-perf-2.6.32-754.14.2.el6', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var sp = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = 'EL' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && release) {\n if (exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n } else {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'kernel / kernel-abi-whitelists / kernel-debug / etc');\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "From Red Hat Security Advisory 2019:1181 :\n\nAn update for qemu-kvm is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Oracle Linux 6 : qemu-kvm (ELSA-2019-1181) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:oracle:linux:qemu-guest-agent", "p-cpe:/a:oracle:linux:qemu-img", "p-cpe:/a:oracle:linux:qemu-kvm", "p-cpe:/a:oracle:linux:qemu-kvm-tools", "cpe:/o:oracle:linux:6"], "id": "ORACLELINUX_ELSA-2019-1181.NASL", "href": "https://www.tenable.com/plugins/nessus/125112", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Red Hat Security Advisory RHSA-2019:1181 and \n# Oracle Linux Security Advisory ELSA-2019-1181 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125112);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1181\");\n\n script_name(english:\"Oracle Linux 6 : qemu-kvm (ELSA-2019-1181) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Oracle Linux host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"From Red Hat Security Advisory 2019:1181 :\n\nAn update for qemu-kvm is now available for Red Hat Enterprise Linux\n6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://oss.oracle.com/pipermail/el-errata/2019-May/008728.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected qemu-kvm packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/OracleLinux\")) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nos_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Oracle Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Oracle Linux 6\", \"Oracle Linux \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Oracle Linux\", cpu);\n\nflag = 0;\nif (rpm_check(release:\"EL6\", reference:\"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"EL6\", cpu:\"x86_64\", reference:\"qemu-img-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"EL6\", cpu:\"x86_64\", reference:\"qemu-kvm-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"EL6\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-0.12.1.2-2.506.el6_10.3\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-guest-agent / qemu-img / qemu-kvm / qemu-kvm-tools\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:33", "description": "The remote Oracle Linux 6 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2019-4637 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Oracle Linux 6 : Unbreakable Enterprise kernel (ELSA-2019-4637)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-09-08T00:00:00", "cpe": ["cpe:/o:oracle:linux:5", "cpe:/o:oracle:linux:6", "p-cpe:/a:oracle:linux:kernel-uek", "p-cpe:/a:oracle:linux:kernel-uek-debug", "p-cpe:/a:oracle:linux:kernel-uek-debug-devel", "p-cpe:/a:oracle:linux:kernel-uek-devel", "p-cpe:/a:oracle:linux:kernel-uek-doc", "p-cpe:/a:oracle:linux:kernel-uek-firmware"], "id": "ORACLELINUX_ELSA-2019-4637.NASL", "href": "https://www.tenable.com/plugins/nessus/125116", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Oracle Linux Security Advisory ELSA-2019-4637.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125116);\n script_version(\"1.8\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/09/08\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"Oracle Linux 6 : Unbreakable Enterprise kernel (ELSA-2019-4637)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Oracle Linux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Oracle Linux 6 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nELSA-2019-4637 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://linux.oracle.com/errata/ELSA-2019-4637.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:5\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:6\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-uek-firmware\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"linux_alt_patch_detect.nasl\", \"ssh_get_info.nasl\");\n script_require_keys(\"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/local_checks_enabled\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('ksplice.inc');\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item('Host/OracleLinux')) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar release = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar os_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Oracle Linux');\nvar os_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'Oracle Linux 6', 'Oracle Linux ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Oracle Linux', cpu);\n\nvar machine_uptrack_level = get_one_kb_item('Host/uptrack-uname-r');\nif (machine_uptrack_level)\n{\n var trimmed_uptrack_level = ereg_replace(string:machine_uptrack_level, pattern:\"\\.(x86_64|i[3-6]86|aarch64)$\", replace:'');\n var fixed_uptrack_levels = ['2.6.39-400.310.1.el6uek'];\n foreach var fixed_uptrack_level ( fixed_uptrack_levels ) {\n if (rpm_spec_vers_cmp(a:trimmed_uptrack_level, b:fixed_uptrack_level) >= 0)\n {\n audit(AUDIT_PATCH_INSTALLED, 'KSplice hotfix for ELSA-2019-4637');\n }\n }\n __rpm_report = 'Running KSplice level of ' + trimmed_uptrack_level + ' does not meet the minimum fixed level of ' + join(fixed_uptrack_levels, sep:' / ') + ' for this advisory.\\n\\n';\n}\n\nvar kernel_major_minor = get_kb_item('Host/uname/major_minor');\nif (empty_or_null(kernel_major_minor)) exit(1, 'Unable to determine kernel major-minor level.');\nvar expected_kernel_major_minor = '2.6';\nif (kernel_major_minor != expected_kernel_major_minor)\n audit(AUDIT_OS_NOT, 'running kernel level ' + expected_kernel_major_minor + ', it is running kernel level ' + kernel_major_minor);\n\nvar pkgs = [\n {'reference':'kernel-uek-2.6.39-400.310.1.el6uek', 'cpu':'i686', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-2.6.39'},\n {'reference':'kernel-uek-2.6.39-400.310.1.el6uek', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-2.6.39'},\n {'reference':'kernel-uek-debug-2.6.39-400.310.1.el6uek', 'cpu':'i686', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-2.6.39'},\n {'reference':'kernel-uek-debug-2.6.39-400.310.1.el6uek', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-2.6.39'},\n {'reference':'kernel-uek-debug-devel-2.6.39-400.310.1.el6uek', 'cpu':'i686', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-devel-2.6.39'},\n {'reference':'kernel-uek-debug-devel-2.6.39-400.310.1.el6uek', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-debug-devel-2.6.39'},\n {'reference':'kernel-uek-devel-2.6.39-400.310.1.el6uek', 'cpu':'i686', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-devel-2.6.39'},\n {'reference':'kernel-uek-devel-2.6.39-400.310.1.el6uek', 'cpu':'x86_64', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-devel-2.6.39'},\n {'reference':'kernel-uek-doc-2.6.39-400.310.1.el6uek', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-doc-2.6.39'},\n {'reference':'kernel-uek-firmware-2.6.39-400.310.1.el6uek', 'release':'6', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-uek-firmware-2.6.39'}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var sp = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = 'EL' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && release) {\n if (exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n } else {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'kernel-uek / kernel-uek-debug / kernel-uek-debug-devel / etc');\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "The remote OracleVM system is missing necessary patches to address critical security updates :\n\n - BUILDINFO: OVMF commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen commit=3885a020649df84b883ea20d11ca15b7d7640201\n\n - BUILDINFO: QEMU upstream commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - x86/HVM: don't give the wrong impression of WRMSR succeeding (root) \n\n - BUILDINFO: OVMF commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen commit=71714f34026c4e0b105bf2def8d2dc4c7171d5b8\n\n - BUILDINFO: QEMU upstream commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - Red-tape: Update repo with new CVE for XSA-297 (Patrick Colp) [Orabug: 29725297] (CVE-2019-11091)\n\n - x86/spec-ctl: Expose X86_FEATURE_MD_CLEAR to guests (Patrick Colp) [Orabug: 29677162] (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: Introduce options to control VERW flushing (Andrew Cooper) [Orabug: 2977162] (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130) (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: Infrastructure to use VERW to flush pipeline buffers (Andrew Cooper) [Orabug: 29677162] (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130) (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: CPUID/MSR definitions for Microarchitectural Data Sampling (Andrew Cooper) [Orabug: 29677162] (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130) (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - BUILDINFO: OVMF commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen commit=0d8ecd7732e56484c10e4b584de17d360d940252\n\n - BUILDINFO: QEMU upstream commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - Config: Update git links to use linux-git.us.oracle.com (Patrick Colp) \n\n - gnttab: set page refcount for copy-on-grant-transfer (Jan Beulich)", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "OracleVM 3.4 : xen (OVMSA-2019-0016) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:oracle:vm:xen", "p-cpe:/a:oracle:vm:xen-tools", "cpe:/o:oracle:vm_server:3.4"], "id": "ORACLEVM_OVMSA-2019-0016.NASL", "href": "https://www.tenable.com/plugins/nessus/125104", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The package checks in this plugin were extracted from OracleVM\n# Security Advisory OVMSA-2019-0016.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125104);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"OracleVM 3.4 : xen (OVMSA-2019-0016) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the RPM output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote OracleVM host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"The remote OracleVM system is missing necessary patches to address\ncritical security updates :\n\n - BUILDINFO: OVMF\n commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen\n commit=3885a020649df84b883ea20d11ca15b7d7640201\n\n - BUILDINFO: QEMU upstream\n commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional\n commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE\n commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS\n commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - x86/HVM: don't give the wrong impression of WRMSR\n succeeding (root) \n\n - BUILDINFO: OVMF\n commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen\n commit=71714f34026c4e0b105bf2def8d2dc4c7171d5b8\n\n - BUILDINFO: QEMU upstream\n commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional\n commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE\n commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS\n commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - Red-tape: Update repo with new CVE for XSA-297 (Patrick\n Colp) [Orabug: 29725297] (CVE-2019-11091)\n\n - x86/spec-ctl: Expose X86_FEATURE_MD_CLEAR to guests\n (Patrick Colp) [Orabug: 29677162] (CVE-2018-12126)\n (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: Introduce options to control VERW\n flushing (Andrew Cooper) [Orabug: 2977162]\n (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: Infrastructure to use VERW to flush\n pipeline buffers (Andrew Cooper) [Orabug: 29677162]\n (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: CPUID/MSR definitions for\n Microarchitectural Data Sampling (Andrew Cooper)\n [Orabug: 29677162] (CVE-2018-12126) (CVE-2018-12127)\n (CVE-2018-12130) (CVE-2018-12126) (CVE-2018-12127)\n (CVE-2018-12130)\n\n - BUILDINFO: OVMF\n commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen\n commit=0d8ecd7732e56484c10e4b584de17d360d940252\n\n - BUILDINFO: QEMU upstream\n commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional\n commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE\n commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS\n commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - Config: Update git links to use linux-git.us.oracle.com\n (Patrick Colp) \n\n - gnttab: set page refcount for copy-on-grant-transfer\n (Jan Beulich)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://oss.oracle.com/pipermail/oraclevm-errata/2019-May/000939.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected xen / xen-tools packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:vm:xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:vm:xen-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:vm_server:3.4\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"OracleVM Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/OracleVM/release\", \"Host/OracleVM/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/OracleVM/release\");\nif (isnull(release) || \"OVS\" >!< release) audit(AUDIT_OS_NOT, \"OracleVM\");\nif (! preg(pattern:\"^OVS\" + \"3\\.4\" + \"(\\.[0-9]|$)\", string:release)) audit(AUDIT_OS_NOT, \"OracleVM 3.4\", \"OracleVM \" + release);\nif (!get_kb_item(\"Host/OracleVM/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"OracleVM\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nflag = 0;\nif (rpm_exists(rpm:\"xen-4.4.4-222\", release:\"OVS3.4\") && rpm_check(release:\"OVS3.4\", reference:\"xen-4.4.4-222.0.4.el6\")) flag++;\nif (rpm_exists(rpm:\"xen-tools-4.4.4-222\", release:\"OVS3.4\") && rpm_check(release:\"OVS3.4\", reference:\"xen-tools-4.4.4-222.0.4.el6\")) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"xen / xen-tools\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:32", "description": "The remote OracleVM system is missing necessary patches to address critical security updates :\n\n - x86/mds: Add empty commit for CVE-2019-11091 (Konrad Rzeszutek Wilk) [Orabug: 29721935] (CVE-2019-11091)\n\n - x86/microcode: Add loader version file in debugfs (Boris Ostrovsky) [Orabug: 29754165]\n\n - x86/microcode: Fix CPU synchronization routine (Borislav Petkov) [Orabug: 29754165]\n\n - x86/microcode: Synchronize late microcode loading (Borislav Petkov) [Orabug: 29754165]\n\n - x86/speculation: Support 'mitigations=' cmdline option (Josh Poimboeuf) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - cpu/speculation: Add 'mitigations=' cmdline option (Josh Poimboeuf) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Print SMT vulnerable on MSBDS with mitigations off (Konrad Rzeszutek Wilk) [Orabug:\n 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Fix comment (Boris Ostrovsky) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: update mds_mitigation to reflect debugfs configuration (Mihai Carabas) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: fix microcode late loading (Mihai Carabas) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add boot option to enable MDS protection only while in idle (Boris Ostrovsky) [Orabug:\n 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Improve coverage for MDS vulnerability (Boris Ostrovsky) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add SMT warning message (Josh Poimboeuf) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add mds=full,nosmt cmdline option (Josh Poimboeuf) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - Documentation: Add MDS vulnerability documentation (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - Documentation: Move L1TF to separate directory (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add mitigation mode VMWERV (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add debugfs for controlling MDS (Kanth Ghatraju) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add sysfs reporting for MDS (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add mitigation control for MDS (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Conditionally clear CPU buffers on idle entry (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/kvm/vmx: Add MDS protection when L1D Flush is not active (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Clear CPU buffers on exit to user (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add mds_clear_cpu_buffers (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/kvm: Expose X86_FEATURE_MD_CLEAR to guests (Andi Kleen) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add BUG_MSBDS_ONLY (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add basic bug infrastructure for MDS (Andi Kleen) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127) (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation: Consolidate CPU whitelists (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/msr-index: Cleanup bit defines (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - Documentation/l1tf: Fix small spelling typo (Salvatore Bonaccorso) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation: Simplify the CPU bug detection logic (Dominik Brodowski) [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "OracleVM 3.4 : Unbreakable / etc (OVMSA-2019-0018) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:oracle:vm:kernel-uek", "p-cpe:/a:oracle:vm:kernel-uek-firmware", "cpe:/o:oracle:vm_server:3.4"], "id": "ORACLEVM_OVMSA-2019-0018.NASL", "href": "https://www.tenable.com/plugins/nessus/125105", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The package checks in this plugin were extracted from OracleVM\n# Security Advisory OVMSA-2019-0018.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125105);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"OracleVM 3.4 : Unbreakable / etc (OVMSA-2019-0018) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the RPM output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote OracleVM host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"The remote OracleVM system is missing necessary patches to address\ncritical security updates :\n\n - x86/mds: Add empty commit for CVE-2019-11091 (Konrad\n Rzeszutek Wilk) [Orabug: 29721935] (CVE-2019-11091)\n\n - x86/microcode: Add loader version file in debugfs (Boris\n Ostrovsky) [Orabug: 29754165]\n\n - x86/microcode: Fix CPU synchronization routine (Borislav\n Petkov) [Orabug: 29754165]\n\n - x86/microcode: Synchronize late microcode loading\n (Borislav Petkov) [Orabug: 29754165]\n\n - x86/speculation: Support 'mitigations=' cmdline option\n (Josh Poimboeuf) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - cpu/speculation: Add 'mitigations=' cmdline option (Josh\n Poimboeuf) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Print SMT vulnerable on MSBDS with\n mitigations off (Konrad Rzeszutek Wilk) [Orabug:\n 29526900] (CVE-2018-12126) (CVE-2018-12130)\n (CVE-2018-12127)\n\n - x86/speculation/mds: Fix comment (Boris Ostrovsky)\n [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130)\n (CVE-2018-12127)\n\n - x86/speculation/mds: update mds_mitigation to reflect\n debugfs configuration (Mihai Carabas) [Orabug: 29526900]\n (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: fix microcode late loading (Mihai\n Carabas) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add boot option to enable MDS\n protection only while in idle (Boris Ostrovsky) [Orabug:\n 29526900] (CVE-2018-12126) (CVE-2018-12130)\n (CVE-2018-12127)\n\n - x86/speculation/mds: Improve coverage for MDS\n vulnerability (Boris Ostrovsky) [Orabug: 29526900]\n (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add SMT warning message (Josh\n Poimboeuf) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add mds=full,nosmt cmdline option\n (Josh Poimboeuf) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - Documentation: Add MDS vulnerability documentation\n (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - Documentation: Move L1TF to separate directory (Thomas\n Gleixner) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add mitigation mode VMWERV (Thomas\n Gleixner) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add debugfs for controlling MDS\n (Kanth Ghatraju) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add sysfs reporting for MDS (Thomas\n Gleixner) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add mitigation control for MDS\n (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Conditionally clear CPU buffers on\n idle entry (Thomas Gleixner) [Orabug: 29526900]\n (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/kvm/vmx: Add MDS protection when L1D Flush is not\n active (Thomas Gleixner) [Orabug: 29526900]\n (CVE-2018-12126) (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Clear CPU buffers on exit to user\n (Thomas Gleixner) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add mds_clear_cpu_buffers (Thomas\n Gleixner) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/kvm: Expose X86_FEATURE_MD_CLEAR to guests (Andi\n Kleen) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add BUG_MSBDS_ONLY (Thomas\n Gleixner) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation/mds: Add basic bug infrastructure for\n MDS (Andi Kleen) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127) (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation: Consolidate CPU whitelists (Thomas\n Gleixner) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/msr-index: Cleanup bit defines (Thomas Gleixner)\n [Orabug: 29526900] (CVE-2018-12126) (CVE-2018-12130)\n (CVE-2018-12127)\n\n - Documentation/l1tf: Fix small spelling typo (Salvatore\n Bonaccorso) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\n\n - x86/speculation: Simplify the CPU bug detection logic\n (Dominik Brodowski) [Orabug: 29526900] (CVE-2018-12126)\n (CVE-2018-12130) (CVE-2018-12127)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://oss.oracle.com/pipermail/oraclevm-errata/2019-May/000940.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected kernel-uek / kernel-uek-firmware packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:vm:kernel-uek\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:vm:kernel-uek-firmware\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:vm_server:3.4\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"OracleVM Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/OracleVM/release\", \"Host/OracleVM/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/OracleVM/release\");\nif (isnull(release) || \"OVS\" >!< release) audit(AUDIT_OS_NOT, \"OracleVM\");\nif (! preg(pattern:\"^OVS\" + \"3\\.4\" + \"(\\.[0-9]|$)\", string:release)) audit(AUDIT_OS_NOT, \"OracleVM 3.4\", \"OracleVM \" + release);\nif (!get_kb_item(\"Host/OracleVM/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"OracleVM\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nflag = 0;\nif (rpm_check(release:\"OVS3.4\", reference:\"kernel-uek-4.1.12-124.26.12.el6uek\")) flag++;\nif (rpm_check(release:\"OVS3.4\", reference:\"kernel-uek-firmware-4.1.12-124.26.12.el6uek\")) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel-uek / kernel-uek-firmware\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:16:11", "description": "An update for kernel is now available for Red Hat Enterprise Linux 7.3 Advanced Update Support, Red Hat Enterprise Linux 7.3 Telco Extended Update Support, and Red Hat Enterprise Linux 7.3 Update Services for SAP Solutions.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* rwsem in inconsistent state leading system to hung (BZ#1690320)\n\n* iscsi driver can block reboot/shutdown (BZ#1693340)\n\n* ovl_create can return positive retval and crash the host (BZ#1696289)", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 7 : kernel (RHSA-2019:1171) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:kernel", "p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists", "p-cpe:/a:redhat:enterprise_linux:kernel-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-headers", "p-cpe:/a:redhat:enterprise_linux:kernel-tools", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel", "p-cpe:/a:redhat:enterprise_linux:perf", "p-cpe:/a:redhat:enterprise_linux:perf-debuginfo", "p-cpe:/a:redhat:enterprise_linux:python-perf", "p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo", "cpe:/o:redhat:enterprise_linux:7.3"], "id": "REDHAT-RHSA-2019-1171.NASL", "href": "https://www.tenable.com/plugins/nessus/125117", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1171. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125117);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1171\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : kernel (RHSA-2019:1171) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 7.3\nAdvanced Update Support, Red Hat Enterprise Linux 7.3 Telco Extended\nUpdate Support, and Red Hat Enterprise Linux 7.3 Update Services for\nSAP Solutions.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* rwsem in inconsistent state leading system to hung (BZ#1690320)\n\n* iscsi driver can block reboot/shutdown (BZ#1693340)\n\n* ovl_create can return positive retval and crash the host\n(BZ#1696289)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1171\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.3\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.3([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.3\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1171\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1171\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", reference:\"kernel-abi-whitelists-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-debug-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-debug-devel-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-debuginfo-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-devel-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", reference:\"kernel-doc-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-headers-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-tools-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-tools-debuginfo-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-tools-libs-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"perf-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"perf-debuginfo-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"python-perf-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-3.10.0-514.64.2.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:10", "description": "An update for kernel is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : kernel (RHSA-2019:1168) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:bpftool", "p-cpe:/a:redhat:enterprise_linux:kernel", "p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists", "p-cpe:/a:redhat:enterprise_linux:kernel-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-headers", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-tools", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel", "p-cpe:/a:redhat:enterprise_linux:perf", "p-cpe:/a:redhat:enterprise_linux:perf-debuginfo", "p-cpe:/a:redhat:enterprise_linux:python-perf", "p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo", "cpe:/o:redhat:enterprise_linux:7", "cpe:/o:redhat:enterprise_linux:7.6"], "id": "REDHAT-RHSA-2019-1168.NASL", "href": "https://www.tenable.com/plugins/nessus/125037", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1168. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125037);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1168\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : kernel (RHSA-2019:1168) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1168\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:bpftool\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1168\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1168\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"bpftool-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"kernel-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", reference:\"kernel-abi-whitelists-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"kernel-debug-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-debug-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"kernel-debug-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"kernel-debug-devel-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-debug-devel-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"kernel-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"kernel-debuginfo-common-s390x-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"kernel-devel-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-devel-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", reference:\"kernel-doc-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"kernel-headers-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-headers-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"kernel-kdump-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"kernel-kdump-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"kernel-kdump-devel-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-tools-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-tools-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"perf-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"perf-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"perf-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"perf-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"python-perf-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"python-perf-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"python-perf-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"bpftool / kernel / kernel-abi-whitelists / kernel-debug / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:52", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : qemu-kvm (RHSA-2019:1178) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:7", "cpe:/o:redhat:enterprise_linux:7.6"], "id": "REDHAT-RHSA-2019-1178.NASL", "href": "https://www.tenable.com/plugins/nessus/125044", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1178. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125044);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1178\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : qemu-kvm (RHSA-2019:1178) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1178\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1178\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-160.el7_6.2\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-160.el7_6.2\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-160.el7_6.2\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-160.el7_6.2\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-160.el7_6.2\")) flag++;\n\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:22", "description": "An update for libvirt is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 6 : libvirt (RHSA-2019:1180) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:libvirt", "p-cpe:/a:redhat:enterprise_linux:libvirt-client", "p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo", "p-cpe:/a:redhat:enterprise_linux:libvirt-devel", "p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock", "p-cpe:/a:redhat:enterprise_linux:libvirt-python", "cpe:/o:redhat:enterprise_linux:6"], "id": "REDHAT-RHSA-2019-1180.NASL", "href": "https://www.tenable.com/plugins/nessus/125046", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1180. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125046);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1180\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : libvirt (RHSA-2019:1180) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for libvirt is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1180\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-python\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 6.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1180\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"libvirt-0.10.2-64.el6_10.1\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"libvirt-0.10.2-64.el6_10.1\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"libvirt-0.10.2-64.el6_10.1\")) flag++;\n if (rpm_check(release:\"RHEL6\", reference:\"libvirt-client-0.10.2-64.el6_10.1\")) flag++;\n if (rpm_check(release:\"RHEL6\", reference:\"libvirt-debuginfo-0.10.2-64.el6_10.1\")) flag++;\n if (rpm_check(release:\"RHEL6\", reference:\"libvirt-devel-0.10.2-64.el6_10.1\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-0.10.2-64.el6_10.1\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"libvirt-python-0.10.2-64.el6_10.1\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"libvirt-python-0.10.2-64.el6_10.1\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"libvirt-python-0.10.2-64.el6_10.1\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-client / libvirt-debuginfo / libvirt-devel / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:32", "description": "An update for rhvm-appliance is now available for Red Hat Virtualization 4 for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe RHV-M Virtual Appliance automates the process of installing and configuring the Red Hat Virtualization Manager. The appliance is available to download as an OVA file from the Customer Portal.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "RHEL 7 : Virtualization Manager (RHSA-2019:1208) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:rhvm-appliance", "cpe:/o:redhat:enterprise_linux:7"], "id": "REDHAT-RHSA-2019-1208.NASL", "href": "https://www.tenable.com/plugins/nessus/125198", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1208. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125198);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1208\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : Virtualization Manager (RHSA-2019:1208) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated package\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for rhvm-appliance is now available for Red Hat\nVirtualization 4 for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe RHV-M Virtual Appliance automates the process of installing and\nconfiguring the Red Hat Virtualization Manager. The appliance is\navailable to download as an OVA file from the Customer Portal.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1208\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected rhvm-appliance package.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:rhvm-appliance\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1208\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"rhvm-appliance-4.3-20190506.0.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"rhvm-appliance\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:34", "description": "An update for redhat-release-virtualization-host and redhat-virtualization-host is now available for Red Hat Virtualization 4 for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe redhat-virtualization-host packages provide the Red Hat Virtualization Host. These packages include redhat-release-virtualization-host, ovirt-node, and rhev-hypervisor.\nRed Hat Virtualization Hosts (RHVH) are installed using a special build of Red Hat Enterprise Linux with only the packages required to host virtual machines. RHVH features a Cockpit user interface for monitoring the host's resources and performing administrative tasks.\n\nThe ovirt-node-ng packages provide the Red Hat Virtualization Host.\nThese packages include redhat-release-virtualization-host, ovirt-node, and rhev-hypervisor. Red Hat Virtualization Hosts (RHVH) are installed using a special build of Red Hat Enterprise Linux with only the packages required to host virtual machines. RHVH features a Cockpit user interface for monitoring the host's resources and performing administrative tasks.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "RHEL 7 : Virtualization Manager (RHSA-2019:1207) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:redhat-release-virtualization-host", "p-cpe:/a:redhat:enterprise_linux:redhat-virtualization-host-image-update", "p-cpe:/a:redhat:enterprise_linux:redhat-virtualization-host-image-update-placeholder", "cpe:/o:redhat:enterprise_linux:7"], "id": "REDHAT-RHSA-2019-1207.NASL", "href": "https://www.tenable.com/plugins/nessus/125197", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1207. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125197);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1207\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : Virtualization Manager (RHSA-2019:1207) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for redhat-release-virtualization-host and\nredhat-virtualization-host is now available for Red Hat Virtualization\n4 for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe redhat-virtualization-host packages provide the Red Hat\nVirtualization Host. These packages include\nredhat-release-virtualization-host, ovirt-node, and rhev-hypervisor.\nRed Hat Virtualization Hosts (RHVH) are installed using a special\nbuild of Red Hat Enterprise Linux with only the packages required to\nhost virtual machines. RHVH features a Cockpit user interface for\nmonitoring the host's resources and performing administrative tasks.\n\nThe ovirt-node-ng packages provide the Red Hat Virtualization Host.\nThese packages include redhat-release-virtualization-host, ovirt-node,\nand rhev-hypervisor. Red Hat Virtualization Hosts (RHVH) are installed\nusing a special build of Red Hat Enterprise Linux with only the\npackages required to host virtual machines. RHVH features a Cockpit\nuser interface for monitoring the host's resources and performing\nadministrative tasks.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1207\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\n\"Update the affected redhat-release-virtualization-host,\nredhat-virtualization-host-image-update and / or\nredhat-virtualization-host-image-update-placeholder packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:redhat-release-virtualization-host\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:redhat-virtualization-host-image-update\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:redhat-virtualization-host-image-update-placeholder\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1207\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"redhat-release-virtualization-host-4.3-0.7.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"redhat-virtualization-host-image-update-4.3-20190512.0.el7_6\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"redhat-virtualization-host-image-update-placeholder-4.3-0.7.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"redhat-release-virtualization-host / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:44", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 7.4 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : qemu-kvm (RHSA-2019:1185) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:7.4"], "id": "REDHAT-RHSA-2019-1185.NASL", "href": "https://www.tenable.com/plugins/nessus/125051", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1185. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125051);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1185\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : qemu-kvm (RHSA-2019:1185) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.4 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1185\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.4\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.4([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.4\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1185\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-141.el7_4.10\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-141.el7_4.10\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-141.el7_4.10\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-141.el7_4.10\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-141.el7_4.10\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:24", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 7.2 Advanced Update Support, Red Hat Enterprise Linux 7.2 Telco Extended Update Support, and Red Hat Enterprise Linux 7.2 Update Services for SAP Solutions.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 7 : qemu-kvm (RHSA-2019:1188) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:libcacard", "p-cpe:/a:redhat:enterprise_linux:libcacard-devel", "p-cpe:/a:redhat:enterprise_linux:libcacard-tools", "p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:7.2"], "id": "REDHAT-RHSA-2019-1188.NASL", "href": "https://www.tenable.com/plugins/nessus/125121", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1188. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125121);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1188\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : qemu-kvm (RHSA-2019:1188) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.2 Advanced Update Support, Red Hat Enterprise Linux 7.2 Telco\nExtended Update Support, and Red Hat Enterprise Linux 7.2 Update\nServices for SAP Solutions.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1188\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcacard\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcacard-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcacard-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.2\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.2([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.2\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1188\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"i686\", reference:\"libcacard-1.5.3-105.el7_2.19\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"libcacard-1.5.3-105.el7_2.19\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"i686\", reference:\"libcacard-devel-1.5.3-105.el7_2.19\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"libcacard-devel-1.5.3-105.el7_2.19\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"libcacard-tools-1.5.3-105.el7_2.19\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-105.el7_2.19\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-105.el7_2.19\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-105.el7_2.19\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"i686\", reference:\"qemu-kvm-debuginfo-1.5.3-105.el7_2.19\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-105.el7_2.19\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-105.el7_2.19\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libcacard / libcacard-devel / libcacard-tools / qemu-img / qemu-kvm / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:10", "description": "An update for kernel is now available for Red Hat Enterprise Linux 8.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* Need to remove radix-tree symbols from the whitelist (BZ#1696222)\n\n* Installation of kernel-modules-extra rpm conflicts with kmod weak-modules (BZ#1703395)", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 8 : kernel (RHSA-2019:1167) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-30T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:bpftool", "p-cpe:/a:redhat:enterprise_linux:bpftool-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel", "p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists", "p-cpe:/a:redhat:enterprise_linux:kernel-core", "p-cpe:/a:redhat:enterprise_linux:kernel-cross-headers", "p-cpe:/a:redhat:enterprise_linux:kernel-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-core", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-modules", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-modules-extra", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-aarch64", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-headers", "p-cpe:/a:redhat:enterprise_linux:kernel-modules", "p-cpe:/a:redhat:enterprise_linux:kernel-modules-extra", "p-cpe:/a:redhat:enterprise_linux:kernel-tools", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-core", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-modules", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-modules-extra", "p-cpe:/a:redhat:enterprise_linux:perf", "p-cpe:/a:redhat:enterprise_linux:perf-debuginfo", "p-cpe:/a:redhat:enterprise_linux:python3-perf", "p-cpe:/a:redhat:enterprise_linux:python3-perf-debuginfo", "cpe:/o:redhat:enterprise_linux:8", "cpe:/o:redhat:enterprise_linux:8.0"], "id": "REDHAT-RHSA-2019-1167.NASL", "href": "https://www.tenable.com/plugins/nessus/125036", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1167. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125036);\n script_version(\"1.7\");\n script_cvs_date(\"Date: 2020/01/30\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1167\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 8 : kernel (RHSA-2019:1167) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 8.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* Need to remove radix-tree symbols from the whitelist (BZ#1696222)\n\n* Installation of kernel-modules-extra rpm conflicts with kmod\nweak-modules (BZ#1703395)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1167\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:bpftool\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:bpftool-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-cross-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-aarch64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python3-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python3-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:8\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:8.0\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^8([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 8.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1167\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1167\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"bpftool-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"bpftool-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"bpftool-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"bpftool-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"bpftool-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", reference:\"kernel-abi-whitelists-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-core-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-core-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-cross-headers-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-cross-headers-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-core-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-core-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"kernel-debug-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-modules-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-modules-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-modules-extra-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-modules-extra-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"kernel-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"kernel-debuginfo-common-aarch64-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debuginfo-common-s390x-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", reference:\"kernel-doc-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-headers-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-headers-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-modules-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-modules-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-modules-extra-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-modules-extra-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-tools-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-tools-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"kernel-tools-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-tools-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-tools-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-tools-libs-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"kernel-tools-libs-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-core-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-modules-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-modules-extra-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"perf-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"perf-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"python3-perf-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"python3-perf-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"python3-perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"python3-perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"python3-perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"bpftool / bpftool-debuginfo / kernel / kernel-abi-whitelists / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:32", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 7.5 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : qemu-kvm (RHSA-2019:1183) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:7.5"], "id": "REDHAT-RHSA-2019-1183.NASL", "href": "https://www.tenable.com/plugins/nessus/125049", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1183. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125049);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1183\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : qemu-kvm (RHSA-2019:1183) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.5 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1183\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.5\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.5([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.5\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1183\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-156.el7_5.7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 6.6 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 6 : qemu-kvm (RHSA-2019:1195) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-guest-agent", "p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:6.6"], "id": "REDHAT-RHSA-2019-1195.NASL", "href": "https://www.tenable.com/plugins/nessus/125125", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1195. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125125);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1195\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : qemu-kvm (RHSA-2019:1195) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n6.6 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1195\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:6.6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6\\.6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 6.6\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1195\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"qemu-guest-agent-0.12.1.2-2.448.el6_6.8\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"qemu-img-0.12.1.2-2.448.el6_6.8\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"qemu-kvm-0.12.1.2-2.448.el6_6.8\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-0.12.1.2-2.448.el6_6.8\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-0.12.1.2-2.448.el6_6.8\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-guest-agent / qemu-img / qemu-kvm / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:46", "description": "An update for kernel is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* aio O_DIRECT writes to non-page-aligned file locations on ext4 can result in the overlapped portion of the page containing zeros (BZ#1686170)\n\n* Tolerate new s390x crypto hardware for migration (BZ#1695496)", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 6 : kernel (RHSA-2019:1169) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:kernel", "p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists", "p-cpe:/a:redhat:enterprise_linux:kernel-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-i686", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-firmware", "p-cpe:/a:redhat:enterprise_linux:kernel-headers", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump-devel", "p-cpe:/a:redhat:enterprise_linux:perf", "p-cpe:/a:redhat:enterprise_linux:perf-debuginfo", "p-cpe:/a:redhat:enterprise_linux:python-perf", "p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo", "cpe:/o:redhat:enterprise_linux:6"], "id": "REDHAT-RHSA-2019-1169.NASL", "href": "https://www.tenable.com/plugins/nessus/125038", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1169. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125038);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1169\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : kernel (RHSA-2019:1169) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* aio O_DIRECT writes to non-page-aligned file locations on ext4 can\nresult in the overlapped portion of the page containing zeros\n(BZ#1686170)\n\n* Tolerate new s390x crypto hardware for migration (BZ#1695496)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1169\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-i686\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-firmware\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 6.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1169\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1169\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", reference:\"kernel-abi-whitelists-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-debug-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-debug-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-debug-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-debug-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-debug-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-debug-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-debug-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-debug-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-debuginfo-common-i686-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-debuginfo-common-s390x-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", reference:\"kernel-doc-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", reference:\"kernel-firmware-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-headers-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-headers-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-headers-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-kdump-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-kdump-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-kdump-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"python-perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"python-perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"python-perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"python-perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"python-perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:53", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 7.3 Advanced Update Support, Red Hat Enterprise Linux 7.3 Telco Extended Update Support, and Red Hat Enterprise Linux 7.3 Update Services for SAP Solutions.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 7 : qemu-kvm (RHSA-2019:1189) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:7.3"], "id": "REDHAT-RHSA-2019-1189.NASL", "href": "https://www.tenable.com/plugins/nessus/125122", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1189. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125122);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1189\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : qemu-kvm (RHSA-2019:1189) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.3 Advanced Update Support, Red Hat Enterprise Linux 7.3 Telco\nExtended Update Support, and Red Hat Enterprise Linux 7.3 Update\nServices for SAP Solutions.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1189\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.3\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.3([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.3\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1189\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-126.el7_3.17\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-126.el7_3.17\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-126.el7_3.17\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-126.el7_3.17\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-126.el7_3.17\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:52", "description": "An update for libvirt is now available for Red Hat Enterprise Linux 7.3 Advanced Update Support, Red Hat Enterprise Linux 7.3 Telco Extended Update Support, and Red Hat Enterprise Linux 7.3 Update Services for SAP Solutions.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 7 : libvirt (RHSA-2019:1187) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:libvirt", "p-cpe:/a:redhat:enterprise_linux:libvirt-client", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-network", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-interface", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-network", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-secret", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-kvm", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-lxc", "p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo", "p-cpe:/a:redhat:enterprise_linux:libvirt-devel", "p-cpe:/a:redhat:enterprise_linux:libvirt-docs", "p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock", "p-cpe:/a:redhat:enterprise_linux:libvirt-login-shell", "p-cpe:/a:redhat:enterprise_linux:libvirt-nss", "cpe:/o:redhat:enterprise_linux:7.3"], "id": "REDHAT-RHSA-2019-1187.NASL", "href": "https://www.tenable.com/plugins/nessus/125120", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1187. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125120);\n script_version(\"1.7\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1187\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : libvirt (RHSA-2019:1187) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for libvirt is now available for Red Hat Enterprise Linux\n7.3 Advanced Update Support, Red Hat Enterprise Linux 7.3 Telco\nExtended Update Support, and Red Hat Enterprise Linux 7.3 Update\nServices for SAP Solutions.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1187\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-docs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-login-shell\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.3\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.3([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.3\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1187\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"i686\", reference:\"libvirt-client-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-client-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-network-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-nwfilter-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-kvm-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-daemon-lxc-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"i686\", reference:\"libvirt-debuginfo-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-debuginfo-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"i686\", reference:\"libvirt-devel-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-devel-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-docs-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-login-shell-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"i686\", reference:\"libvirt-nss-2.0.0-10.el7_3.14\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"libvirt-nss-2.0.0-10.el7_3.14\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-client / libvirt-daemon / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:46", "description": "An update for libvirt is now available for Red Hat Enterprise Linux 6.6 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 6 : libvirt (RHSA-2019:1194) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:libvirt", "p-cpe:/a:redhat:enterprise_linux:libvirt-client", "p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo", "p-cpe:/a:redhat:enterprise_linux:libvirt-devel", "p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock", "p-cpe:/a:redhat:enterprise_linux:libvirt-python", "cpe:/o:redhat:enterprise_linux:6.6"], "id": "REDHAT-RHSA-2019-1194.NASL", "href": "https://www.tenable.com/plugins/nessus/125124", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1194. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125124);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1194\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : libvirt (RHSA-2019:1194) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for libvirt is now available for Red Hat Enterprise Linux\n6.6 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1194\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"
qemu-kvm security update
