SIMATICS7-1200 and SIMATICS7-1500CPU families Man-in-the-Middle Attack Vulnerability

The Simatic S7-1200 CPU and Simatic S7-1500 CPU families are used for discrete and continuous control in industrial environments, such as manufacturing, food and beverage, and the chemical industry. A man-in-the-middle attack vulnerability exists in the SIMATICS7-1200 and SIMATICS7-1500 CPU...

Siemens SIMATIC S7-300 CP 341 Communications processor

Binary data 764909.prm...

CVE-2019-10929

A vulnerability has been identified in SIMATIC CP 1626 All versions, SIMATIC ET 200SP Open Controller CPU 1515SP PC incl. SIPLUS variants All versions, SIMATIC ET 200SP Open Controller CPU 1515SP PC2 incl. SIPLUS variants All versions V20.8, SIMATIC HMI Panel incl. SIPLUS variants All versions,...

Code injection

A vulnerability has been identified in SIMATIC Drive Controller family All versions, SIMATIC ET 200SP Open Controller CPU 1515SP PC incl. SIPLUS variants All versions, SIMATIC ET 200SP Open Controller CPU 1515SP PC2 incl. SIPLUS variants All versions = V20.8, SIMATIC S7-1200 CPU family incl. SIPL...

CVE-2019-10929

CVE-2019-10929 affects Siemens SIMATIC products (S7-1200/1500 families, ET200SP Open Controllers, HMI/WinCC/STEP 7, TIM 1531 IRC, etc.). The flaw is a message protection bypass caused by properties in the integrity-protection calculation, enabling a man-in-the-middle attacker with network access ...

CVE-2019-10943

CVE-2019-10943 affects Siemens SIMATIC devices including Drive Controller family, ET 200SP Open Controller CPUs 1515SP PC/PC2, S7-1200 CPUs, S7-1500 CPUs and related software/S7-PLCSIM Advanced. Root cause: missing integrity check allows an attacker with network access to port 102/tcp to modify t...

CVE-2019-10943

A vulnerability has been identified in SIMATIC Drive Controller family All versions, SIMATIC ET 200SP Open Controller CPU 1515SP PC incl. SIPLUS variants All versions, SIMATIC ET 200SP Open Controller CPU 1515SP PC2 incl. SIPLUS variants All versions = V20.8, SIMATIC S7-1200 CPU family incl. SIPL...

Siemens Simatic MP 277 Control Panel

Binary data 764813.prm...

Siemens SIMATIC HMI Panels and TIA Portal <= v15.1 Update 1 Hardcoded Credentials (ICSA-19-134-09)

Binary data 720274.prm...

Siemens SIMATIC S7-300 PLC Privilege Bypass Vulnerability

The Siemens SIMATIC S7-300 CPU is a modular general-purpose controller from Siemens for the manufacturing industry. The Siemens SIMATIC S7-300 PLC module is vulnerable to an unauthorized, execute CPU attack via privilege bypass. An attacker can construct special application layer data messages th...

The vulnerability of the microprogramming software of the Simatic Ident industrial identification and positioning system, due to the lack of encryption, allows attackers to gain access to the data.

The vulnerability of the microprogramming software in Simatic Ident system-based industrial identification and positioning systems is related to the lack of encryption. Exploiting this vulnerability can allow a malicious actor, operating remotely, to gain access to data transmitted between the...

The vulnerability of the microprogramming software in Simatic Ident’s industrial identification and positioning system, due to insufficient access control, allows attackers to increase their privileges.

The vulnerability of the microprogramming software in Simatic Ident’s industrial identification and positioning system is related to insufficient access control. Exploiting this vulnerability could allow an authorized intruder, operating remotely, to increase their privileges by sending specially...

CVE-2019-10935

A vulnerability has been identified in SIMATIC PCS 7 V8.0 and earlier All versions, SIMATIC PCS 7 V8.1 All versions V8.1 with WinCC V7.3 Upd 19, SIMATIC PCS 7 V8.2 All versions V8.2 SP1 with WinCC V7.4 SP1 Upd 11, SIMATIC PCS 7 V9.0 All versions V9.0 SP2 with WinCC V7.4 SP1 Upd11, SIMATIC WinCC...

Design/Logic Flaw

A vulnerability has been identified in SIMATIC PCS 7 V8.0 and earlier All versions, SIMATIC PCS 7 V8.1 All versions V8.1 with WinCC V7.3 Upd 19, SIMATIC PCS 7 V8.2 All versions V8.2 SP1 with WinCC V7.4 SP1 Upd 11, SIMATIC PCS 7 V9.0 All versions V9.0 SP2 with WinCC V7.4 SP1 Upd11, SIMATIC WinCC...

CVE-2019-10935

CVE-2019-10935 applies to Siemens SIMATIC WinCC/PCS7 family (PCS 7 v8.x/9.x and WinCC variants) where the WinCC DataMonitor web application allows an authenticated, network-accessible attacker to upload arbitrary ASPX code. The vulnerability enables unrestricted file upload without user interacti...

CVE-2019-10935

A vulnerability has been identified in SIMATIC PCS 7 V8.0 and earlier All versions, SIMATIC PCS 7 V8.1 All versions V8.1 with WinCC V7.3 Upd 19, SIMATIC PCS 7 V8.2 All versions V8.2 SP1 with WinCC V7.4 SP1 Upd 11, SIMATIC PCS 7 V9.0 All versions V9.0 SP2 with WinCC V7.4 SP1 Upd11, SIMATIC WinCC...

Multiple Siemens Products Code Upload Vulnerability Vulnerability

Siemens SIMATIC PCS 7 and SIMATIC WinCC are both products of Siemens, Germany.SIMATIC PCS 7 is a process control system.SIMATIC WinCC is an automated SCADA system.SIMATIC WinCC is one of the data analysis and display components. SIMATIC WinCC is an automated data acquisition and monitoring SCADA...

Siemens SIMATIC NET SOFTNET-IE PROFINET IO V14 Software

Binary data 764691.prm...

ICSA-19-192-02 Siemens SIMATIC WinCC and PCS7 (Update C)

1. EXECUTIVE SUMMARY CVSS v3 7.2 ATTENTION: Exploitable remotely/low skill level to exploit Vendor: Siemens Equipment: SIMATIC WinCC and SIMATIC PCS7 Vulnerability: Unrestricted Upload of File with Dangerous Type 2. UPDATE INFORMATION This updated advisory is a follow-up to the advisory update...

ICSA-19-192-04 Siemens SIMATIC RF6XXR

1. EXECUTIVE SUMMARY CVSS v3 5.9 ATTENTION : Exploitable remotely/public exploits are available Vendor : Siemens Equipment : SIMATIC RF6XXR Vulnerabilities : Improper Input Validation, Cryptographic Issues 2. RISK EVALUATION Successful exploitation of these vulnerabilities could allow access to...