Security update for wpa_supplicant (moderate)

An update that fixes 22 vulnerabilities is now available.

Description:

This update for wpa_supplicant fixes the following issues:

Security issue fixed:

• CVE-2019-16275: Fixed an AP mode PMF disconnection protection bypass
  (bsc#1150934).

Non-security issues fixed:

• Enable SAE support (jsc#SLE-14992).
• Limit P2P_DEVICE name to appropriate ifname size.
• Fix wicked wlan (bsc#1156920)
• Restore fi.epitest.hostap.WPASupplicant.service (bsc#1167331)
• With v2.9 fi.epitest.hostap.WPASupplicant.service is obsolete
  (bsc#1167331)
• Fix WLAN config on boot with wicked. (bsc#1166933)
• Update to 2.9 release:
  • SAE changes
    • disable use of groups using Brainpool curves
    • improved protection against side channel attacks
      [https://w1.fi/security/2019-6/]
  • EAP-pwd changes
    • disable use of groups using Brainpool curves
    • allow the set of groups to be configured (eap_pwd_groups)
    • improved protection against side channel attacks
      [https://w1.fi/security/2019-6/]
  • fixed FT-EAP initial mobility domain association using PMKSA caching
    (disabled by default for backwards compatibility; can be enabled with
    ft_eap_pmksa_caching=1)
  • fixed a regression in OpenSSL 1.1+ engine loading
  • added validation of RSNE in (Re)Association Response frames
  • fixed DPP bootstrapping URI parser of channel list
  • extended EAP-SIM/AKA fast re-authentication to allow use with FILS
  • extended ca_cert_blob to support PEM format
  • improved robustness of P2P Action frame scheduling
  • added support for EAP-SIM/AKA using anonymous@realm identity
  • fixed Hotspot 2.0 credential selection based on roaming consortium to
    ignore credentials without a specific EAP method
  • added experimental support for EAP-TEAP peer (RFC 7170)
  • added experimental support for EAP-TLS peer with TLS v1.3
  • fixed a regression in WMM parameter configuration for a TDLS peer
  • fixed a regression in operation with drivers that offload 802.1X
    4-way handshake
  • fixed an ECDH operation corner case with OpenSSL
  • SAE changes
    • added support for SAE Password Identifier
    • changed default configuration to enable only groups 19, 20, 21
      (i.e., disable groups 25 and 26) and disable all unsuitable groups
      completely based on REVmd changes
    • do not regenerate PWE unnecessarily when the AP uses the
      anti-clogging token mechanisms
    • fixed some association cases where both SAE and FT-SAE were enabled
      on both the station and the selected AP
    • started to prefer FT-SAE over SAE AKM if both are enabled
    • started to prefer FT-SAE over FT-PSK if both are enabled
    • fixed FT-SAE when SAE PMKSA caching is used
    • reject use of unsuitable groups based on new implementation
      guidance in REVmd (allow only FFC groups with prime >= 3072 bits and ECC
      groups with prime >= 256)
    • minimize timing and memory use differences in PWE derivation
      [https://w1.fi/security/2019-1/] (CVE-2019-9494, bsc#1131868)
  • EAP-pwd changes
    • minimize timing and memory use differences in PWE derivation
      [https://w1.fi/security/2019-2/] (CVE-2019-9495, bsc#1131870)
    • verify server scalar/element [https://w1.fi/security/2019-4/]
      (CVE-2019-9497, CVE-2019-9498, CVE-2019-9499, bsc#1131874, bsc#1131872,
      bsc#1131871, bsc#1131644)
    • fix message reassembly issue with unexpected fragment
      [https://w1.fi/security/2019-5/] (CVE-2019-11555, bsc#1133640)
    • enforce rand,mask generation rules more strictly
    • fix a memory leak in PWE derivation
    • disallow ECC groups with a prime under 256 bits (groups 25, 26, and

27. • SAE/EAP-pwd side-channel attack update
      [https://w1.fi/security/2019-6/] (CVE-2019-13377, bsc#1144443)

  * fixed CONFIG_IEEE80211R=y (FT) build without CONFIG_FILS=y
  * Hotspot 2.0 changes
    - do not indicate release number that is higher than the one AP

supports
- added support for release number 3
- enable PMF automatically for network profiles created from
credentials
* fixed OWE network profile saving
* fixed DPP network profile saving
* added support for RSN operating channel validation (CONFIG_OCV=y and
network profile parameter ocv=1)
* added Multi-AP backhaul STA support
* fixed build with LibreSSL
* number of MKA/MACsec fixes and extensions
* extended domain_match and domain_suffix_match to allow list of values
* fixed dNSName matching in domain_match and domain_suffix_match when
using wolfSSL
* started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192 AKM if both
are enabled
* extended nl80211 Connect and external authentication to support SAE,
FT-SAE, FT-EAP-SHA384
* fixed KEK2 derivation for FILS+FT
* extended client_cert file to allow loading of a chain of PEM encoded
certificates
* extended beacon reporting functionality
* extended D-Bus interface with number of new properties
* fixed a regression in FT-over-DS with mac80211-based drivers
* OpenSSL: allow systemwide policies to be overridden
* extended driver flags indication for separate 802.1X and PSK 4-way
handshake offload capability
* added support for random P2P Device/Interface Address use
* extended PEAP to derive EMSK to enable use with ERP/FILS
* extended WPS to allow SAE configuration to be added automatically for
PSK (wps_cred_add_sae=1)
* removed support for the old D-Bus interface (CONFIG_CTRL_IFACE_DBUS)
* extended domain_match and domain_suffix_match to allow list of values
* added a RSN workaround for misbehaving PMF APs that advertise
IGTK/BIP KeyID using incorrect byte order
* fixed PTK rekeying with FILS and FT
* fixed WPA packet number reuse with replayed messages and key
reinstallation [https://w1.fi/security/2017-1/] (CVE-2017-13077,
CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081,
CVE-2017-13082, CVE-2017-13086, CVE-2017-13087, CVE-2017-13088)
* fixed unauthenticated EAPOL-Key decryption in wpa_supplicant
[https://w1.fi/security/2018-1/] (CVE-2018-14526)
* added support for FILS (IEEE 802.11ai) shared key authentication
* added support for OWE (Opportunistic Wireless Encryption, RFC 8110;
and transition mode defined by WFA)
* added support for DPP (Wi-Fi Device Provisioning Protocol)
* added support for RSA 3k key case with Suite B 192-bit level
* fixed Suite B PMKSA caching not to update PMKID during each 4-way
handshake
* fixed EAP-pwd pre-processing with PasswordHashHash
* added EAP-pwd client support for salted passwords
* fixed a regression in TDLS prohibited bit validation
* started to use estimated throughput to avoid undesired signal
strength based roaming decision
* MACsec/MKA:
- new macsec_linux driver interface support for the Linux kernel
macsec module
- number of fixes and extensions
* added support for external persistent storage of PMKSA cache
(PMKSA_GET/PMKSA_ADD control interface commands; and
MESH_PMKSA_GET/MESH_PMKSA_SET for the mesh case)
* fixed mesh channel configuration pri/sec switch case
* added support for beacon report
* large number of other fixes, cleanup, and extensions
* added support for randomizing local address for GAS queries
(gas_rand_mac_addr parameter)
* fixed EAP-SIM/AKA/AKA’ ext auth cases within TLS tunnel
* added option for using random WPS UUID (auto_uuid=1)
* added SHA256-hash support for OCSP certificate matching
* fixed EAP-AKA’ to add AT_KDF into Synchronization-Failure
* fixed a regression in RSN pre-authentication candidate selection
* added option to configure allowed group management cipher suites
(group_mgmt network profile parameter)
* removed all PeerKey functionality
* fixed nl80211 AP and mesh mode configuration regression with Linux
4.15 and newer
* added ap_isolate configuration option for AP mode
* added support for nl80211 to offload 4-way handshake into the driver
* added support for using wolfSSL cryptographic library
* SAE
- added support for configuring SAE password separately of the WPA2
PSK/passphrase
- fixed PTK and EAPOL-Key integrity and key-wrap algorithm selection
for SAE; note: this is not backwards compatible, i.e., both the AP and
station side implementations will need to be update at the same time to
maintain interoperability
- added support for Password Identifier
- fixed FT-SAE PMKID matching
* Hotspot 2.0
- added support for fetching of Operator Icon Metadata ANQP-element
- added support for Roaming Consortium Selection element
- added support for Terms and Conditions
- added support for OSEN connection in a shared RSN BSS
- added support for fetching Venue URL information
* added support for using OpenSSL 1.1.1
* FT
- disabled PMKSA caching with FT since it is not fully functional
- added support for SHA384 based AKM
- added support for BIP ciphers BIP-CMAC-256, BIP-GMAC-128,
BIP-GMAC-256 in addition to previously supported BIP-CMAC-128
- fixed additional IE inclusion in Reassociation Request frame when
using FT protocol

• Changed service-files for start after network (systemd-networkd).

This update was imported from the SUSE:SLE-15:Update update project.

Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or “zypper patch”.

Alternatively you can run the command listed for your product:

• openSUSE Leap 15.1:

  zypper in -t patch openSUSE-2020-2053=1