CVE-2026-10644: Out-of-bounds Write

The Microchip SERCOM-G1 UART driver drivers/serial/uartmchpsercomg1.c, used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchronous DMA receive path. When uartrxenable is invoked with a one-byte receive buffer len == 1 and CONFIGUARTMCHPASYNC is enabled, the RX-complete...

CVE-2026-38571

Cleartext storage and exposure of WPA2 credentials, and missing authentication on the rr/wr memory read/write commands, in the unauthenticated UART debug console of the Tenda N300 F3 V603 allow a physically proximate attacker to obtain stored WPA2 credentials in cleartext and to read or write...

CVE-2026-38571: Cleartext Storage of Sensitive Information

Cleartext storage and exposure of WPA2 credentials, and missing authentication on the rr/wr memory read/write commands, in the unauthenticated UART debug console of the Tenda N300 F3 V603 allow a physically proximate attacker to obtain stored WPA2 credentials in cleartext and to read or write...

CVE-2026-38571

The Tenda N300 F3 (V603) router is vulnerable to an issue involving the unauthenticated UART debug console . The vulnerability stems from the cleartext storage and exposure of WPA2 credentials , combined with missing authentication on the rr/wr memory read/write commands . These flaws allow a phy...

CVE-2026-10642

The Zephyr PL011 UART driver drivers/serial/uartpl011.c contains an unbounded software loop in pl011irqtxenable that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit PL011IMSCTXIM is set, to work around the controller's level-transition TX-interrupt...

CVE-2026-10642

The Zephyr PL011 UART driver drivers/serial/uartpl011.c contains an unbounded software loop in pl011irqtxenable that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit PL011IMSCTXIM is set, to work around the controller's level-transition TX-interrupt...

CVE-2026-10642 Unbounded TX busy-loop DoS in Zephyr PL011 UART driver under CTS hardware flow control

The Zephyr PL011 UART driver drivers/serial/uartpl011.c contains an unbounded software loop in pl011irqtxenable that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit PL011IMSCTXIM is set, to work around the controller's level-transition TX-interrupt...

EUVD-2026-39106

The Zephyr PL011 UART driver drivers/serial/uartpl011.c contains an unbounded software loop in pl011irqtxenable that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit PL011IMSCTXIM is set, to work around the controller's level-transition TX-interrupt...

CVE-2026-10642 Unbounded TX busy-loop DoS in Zephyr PL011 UART driver under CTS hardware flow control

The Zephyr PL011 UART driver drivers/serial/uartpl011.c contains an unbounded software loop in pl011irqtxenable that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit PL011IMSCTXIM is set, to work around the controller's level-transition TX-interrupt...

CVE-2026-10642

The CVE-2026-10642 issue affects the Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) where pl011_irq_tx_enable() can spin in an unbounded loop when CTS hardware flow control is enabled and CTS is de-asserted by the peer. This causes the TX interrupt to remain masked and the controller to s...

CVE-2026-10642 Unbounded TX busy-loop DoS in Zephyr PL011 UART driver under CTS hardware flow control

The Zephyr PL011 UART driver drivers/serial/uartpl011.c contains an unbounded software loop in pl011irqtxenable that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit PL011IMSCTXIM is set, to work around the controller's level-transition TX-interrupt...

CVE-2026-53073

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hcildisc: Clear HCIUARTPROTOINIT on error When hciregisterdev fails in hciuartregisterdev HCIUARTPROTOINIT is not cleared before calling hu-proto-closehu and setting hu-hdev to NULL. This means incoming UART data will...

CVE-2026-53073

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hcildisc: Clear HCIUARTPROTOINIT on error When hciregisterdev fails in hciuartregisterdev HCIUARTPROTOINIT is not cleared before calling hu-proto-closehu and setting hu-hdev to NULL. This means incoming UART data will...

CVE-2026-53073

CVE-2026-53073 affects Linux kernel Bluetooth HCI UART handling. The issue occurs when hci_register_dev() fails in hci_uart_register_dev() and HCI_UART_PROTO_INIT is not cleared before hu->proto->close() and hu->hdev = NULL, potentially allowing protocol recv path to access freed resourc...

PT-2026-52101

Name of the Vulnerable Software and Affected Versions Zephyr versions 4.1.0 through 4.4.0 Description The PL011 UART driver in drivers/serial/uart pl011.c contains an unbounded software loop within the pl011 irq tx enable function. This loop repeatedly invokes the interrupt-driven application...

CVE-2026-10642: Loop with Unreachable Exit Condition

The Zephyr PL011 UART driver drivers/serial/uartpl011.c contains an unbounded software loop in pl011irqtxenable that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit PL011IMSCTXIM is set, to work around the controller's level-transition TX-interrupt...

CVE-2026-50099

During WiFi association, Naxclow device firmware prints the host network’s SSID, PSK, and negotiated WPA keys in cleartext to an exposed UART console on production hardware. The UART pads are labeled, run with default serial settings, and drop to an interactive RT-Thread shell that permits...

CVE-2026-50099 Naxclow IoT Platform Insertion of sensitive information into Externally-Accessible file or directory

During WiFi association, Naxclow device firmware prints the host network’s SSID, PSK, and negotiated WPA keys in cleartext to an exposed UART console on production hardware. The UART pads are labeled, run with default serial settings, and drop to an interactive RT-Thread shell that permits...

CVE-2026-50099

CVE-2026-50099 affects Naxclow IoT platform firmware. During WiFi association, the device prints host network SSID, PSK, and negotiated WPA keys in cleartext to an exposed UART console on production hardware. UART pads are labeled, run with default serial settings, and drop to an interactive RT-T...

CVE-2026-50099: Insertion of Sensitive Information into Externally-Accessible File or Directory

During WiFi association, Naxclow device firmware prints the host network’s SSID, PSK, and negotiated WPA keys in cleartext to an exposed UART console on production hardware. The UART pads are labeled, run with default serial settings, and drop to an interactive RT-Thread shell that permits...