NAT-PMP Protocol vulnerability 1 2 0 0 million routers at risk-vulnerability and early warning-the black bar safety net

Present in the embedded device vulnerability, especially the kind of small office and home office route, is never a steady stream. This week security researchers discovered a serious vulnerability, because theNAT-PMP Protocol improper design will affect more than 1 2 0 0 million of the router...

NAT-PMP Security Vulnerability Affects 1.2M Routers

Vulnerabilities in embedded devices, in particular small office and home office routers, have been relentless. Another serious issue was discovered this week that affects more than 1.2 million such devices due to improper NAT-PMP protocol implementations, most of which run counter to the...

Incorrect implementation of NAT-PMP in multiple devices

Overview Many NAT-PMP devices are incorrectly configured, allowing them to field requests received on external network interfaces or map forwarding routes to addresses other than that of the requesting host, making them potentially vulnerable to information disclosure and malicious port mapping...

Cisco IOS Software Network Address Translation (NAT) ALG Module DoS (cisco-sa-20140924-nat)

According to its self-reported version, the version of Cisco IOS running on the remote host is affected by a denial of service vulnerability in the Network Address Translation NAT application-layer gateway ALG module. This issue exists due to improper handling of multipart Session Description...

CVE-2014-3361

The ALG module in Cisco IOS 15.0 through 15.4 does not properly implement SIP over NAT, which allows remote attackers to cause a denial of service device reload via multipart SDP IPv4 traffic, aka Bug ID CSCun54071...

Code injection

The ALG module in Cisco IOS 15.0 through 15.4 does not properly implement SIP over NAT, which allows remote attackers to cause a denial of service device reload via multipart SDP IPv4 traffic, aka Bug ID CSCun54071...

CVE-2014-3361

The ALG module in Cisco IOS 15.0 through 15.4 does not properly implement SIP over NAT, which allows remote attackers to cause a denial of service device reload via multipart SDP IPv4 traffic, aka Bug ID CSCun54071...

CVE-2014-3361

CVE-2014-3361 affects Cisco IOS Software (15.0–15.4) NAT ALG module. The bug arises from improper handling of SIP over NAT, specifically multipart SDP in SIP messages, allowing a remote attacker to cause a denial of service (device reload). This is a network-accessible issue in the ALG/NAT proces...

“Invalid Credentials” Error Adding a Hyper-V Host Using a Local Account

Article Applicability This article relates to an error that only occurs when Veeam Backup & Replication is deployed on a Windows machine. With the Veeam Software Appliance, to add a Hyper-V host using credentials, it requires that both the appliance and the Windows machine are added to the same...

Juniper Networks Junos OS NAT Protocol Translation Denial of Service Vulnerability

DoS in NAT Protocol Translation SPDX-FileCopyrightText: 2014 Greenbone AG Some text descriptions might be excerpted from a referenced sources, and are Copyright C by the respective right holders. SPDX-License-Identifier: GPL-2.0-only CPE = "cpe:/o:juniper:junos"; if description...

Juniper Junos SRX Series NAT IPv6 to IPv4 Remote DoS (JSA10641)

According to its self-reported version number, the remote Juniper Junos SRX series device is affected by a denial of service vulnerability. A remote attacker, by sending a specially crafted packet to an SRX series device, can crash the 'flowd' process when the packet is translated from IPv6 to...

Juniper Junos SRX Series NAT IPv6 to IPv4 Remote DoS (JSA10635)

According to its self-reported version number, the remote Juniper Junos SRX series device is affected by a denial of service vulnerability. A remote attacker, by sending a specially crafted packet to an SRX series device, can crash the 'flowd' process when the packet is translated from IPv6 to...

Egresser - Tool to Enumerate Outbound Firewall Rules

Egresser is a tool to enumerate outbound firewall rules, designed for penetration testers to assess whether egress filtering is adequate from within a corporate network. Probing each TCP port in turn, the Egresser server will respond with the client’s source IP address and port, allowing the clie...

CVE-2014-3817

Juniper Junos 11.4 before 11.4R12, 12.1X44 before 12.1X44-D32, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, and 12.1X47 before 12.1X47-D10 on SRX Series devices, when NAT protocol translation from IPv4 to IPv6 is enabled, allows remote attackers to cause a denial of service flowd hang ...

Input validation

Juniper Junos 11.4 before 11.4R12, 12.1X44 before 12.1X44-D32, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, and 12.1X47 before 12.1X47-D10 on SRX Series devices, when NAT protocol translation from IPv4 to IPv6 is enabled, allows remote attackers to cause a denial of service flowd hang ...

CVE-2014-3817

CVE-2014-3817 affects Juniper Networks Junos OS on SRX Series devices, where NAT protocol translation from IPv6 to IPv4 enabled allows remote attackers to cause a denial of service by sending a crafted IPv6→IPv4 packet that can hang or crash the flowd process. The issue impacts Junos versions lis...

CVE-2014-3817

Juniper Junos 11.4 before 11.4R12, 12.1X44 before 12.1X44-D32, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, and 12.1X47 before 12.1X47-D10 on SRX Series devices, when NAT protocol translation from IPv4 to IPv6 is enabled, allows remote attackers to cause a denial of service flowd hang ...

SafeTP 1.46 Passive Mode Internal IP Address Revealing Vulnerability

No description provided by source. source: http://www.securityfocus.com/bid/5822/info SafeTP is a freely available, open source secure ftp client-server software package. It is available for Unix, Linux, and Microsoft Operating Systems. It has been reported that under some circumstances, the Safe...

Microsoft IIS 2.0/3.0/4.0/5.0/5.1 Internal IP Address Disclosure Vulnerability

No description provided by source. source: http://www.securityfocus.com/bid/1499/info When a remote user attempts to access an area protected by basic authentication with no realm defined, while specifying HTTP 1.0, Microsoft IIS will return an Access Denied error message containing the internal ...

DNS Reverse Download and Exec Shellcode

No description provided by source. Shellcode: download and execute file via reverse DNS channel Features: Windows 7 tested UAC without work svchost.exe makes requests via getaddrinfo Firewall/Router/Nat/Proxy bypass reverse connection like dnscat do, but without sockets and stable! NO SOCKET DNS...