Design/Logic Flaw

On Juniper Networks Junos OS devices, receipt of a malformed IPv6 packet may cause the system to crash and restart vmcore. This issue can be trigged by a malformed IPv6 packet destined to the Routing Engine. An attacker can repeatedly send the offending packet resulting in an extended Denial of...

Design/Logic Flaw

On Juniper Networks Junos OS and Junos OS Evolved devices, BGP session flapping can lead to a routing process daemon RPD crash and restart, limiting the attack surface to configured BGP peers. This issue only affects devices with BGP damping in combination with accepted-prefix-limit configuration...

Design/Logic Flaw

On Juniper Networks SRX Series configured with application identification inspection enabled, receipt of specific HTTP traffic can cause high CPU load utilization, which could lead to traffic interruption. Application identification is enabled by default and is automatically turned on when...

Design/Logic Flaw

When configuring stateless firewall filters in Juniper Networks EX4600 and QFX 5000 Series devices using Virtual Extensible LAN protocol VXLAN, the discard action will fail to discard traffic under certain conditions. Given a firewall filter configuration similar to: family ethernet-switching...

Design/Logic Flaw

On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in a Virtual Chassis configuration, receipt of a stream of specific layer 2 frames can cause high CPU load, which could lead to traffic interruption. This issue does not occur when the device is deployed in Stand Alone...

Code injection

When DNS filtering is enabled on Juniper Networks Junos MX Series with one of the following cards MS-PIC, MS-MIC or MS-MPC, an incoming stream of packets processed by the Multiservices PIC Management Daemon mspmand process, responsible for managing "URL Filtering service", may crash, causing the...

Design/Logic Flaw

On Juniper Networks Junos OS and Junos OS Evolved platforms with EVPN configured, receipt of specific BGP packets causes a slow memory leak. If the memory is exhausted the rpd process might crash. If the issue occurs, the memory leak could be seen by executing the "show task memory detail | match...

Input validation

An input validation vulnerability exists in Juniper Networks Junos OS, allowing an attacker to crash the srxpfe process, causing a Denial of Service DoS through the use of specific maintenance commands. The srxpfe process restarts automatically, but continuous execution of the commands could lead...

Input validation

The DHCPv6 Relay-Agent service, part of the Juniper Enhanced jdhcpd daemon shipped with Juniper Networks Junos OS has an Improper Input Validation vulnerability which will result in a Denial of Service DoS condition when a DHCPv6 client sends a specific DHPCv6 message allowing an attacker to...

Default configuration

The system console configuration option 'log-out-on-disconnect' In Juniper Networks Junos OS Evolved fails to log out an active CLI session when the console cable is disconnected. This could allow a malicious attacker with physical access to the console the ability to resume a previous interactiv...

Cross site scripting

Insufficient Cross-Site Scripting XSS protection in Juniper Networks J-Web and web based HTTP/HTTPS services allows an unauthenticated attacker to hijack the target user's HTTP/HTTPS session and perform administrative actions on the Junos device as the targeted user. This issue only affects Junip...

Command injection

On Juniper Networks PTX and QFX Series devices with packet sampling configured using tunnel-observation mpls-over-udp, sampling of a malformed packet can cause the Kernel Routing Table KRT queue to become stuck. KRT is the module within the Routing Process Daemon RPD that synchronized the routing...

Race condition

When DNS filtering is enabled on Juniper Networks Junos MX Series with one of the following cards MS-PIC, MS-MIC or MS-MPC, an incoming stream of packets processed by the Multiservices PIC Management Daemon mspmand process might be bypassed due to a race condition. Due to this vulnerability,...

Information disclosure

Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a vulnerability. Notes: The fix resolved an issue when MACsec replay-protect was enabled and the replay-protect-window value was set to zero, Junos OS w...

CVE-2020-1689 Junos OS: EX4300-MP/EX4600/QFX5K Series: High CPU load due to receipt of specific layer 2 frames when deployed in a Virtual Chassis configuration

On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in a Virtual Chassis configuration, receipt of a stream of specific layer 2 frames can cause high CPU load, which could lead to traffic interruption. This issue does not occur when the device is deployed in Stand Alone...

CVE-2020-1688 Junos OS: SRX and NFX Series: Insufficient Web API private key protection

On Juniper Networks SRX Series and NFX Series, a local authenticated user with access to the shell may obtain the Web API service private key that is used to provide encrypted communication between the Juniper device and the authenticator services. Exploitation of this vulnerability may allow an...

CVE-2020-1688

Technical details (affected products/versions/impact/fix) are not publicly available in the provided connected documents. Monitor for updates.

CVE-2020-1686

CVE-2020-1686 affects Junos OS where receipt of a malformed IPv6 packet can crash the system (vmcore) and restart, enabling an extended DoS when attacked via IPv6 to the Routing Engine. The issue is IPv6-specific; IPv4 packets are not affected. Affected Junos OS versions include 18.4R2-S4 and ear...

CVE-2020-1687 Junos OS: EX4300-MP/EX4600/QFX5K Series: High CPU load due to receipt of specific layer 2 frames in EVPN-VXLAN deployment.

On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in Ethernet VPN EVPN-Virtual Extensible LAN VXLAN configuration, receipt of a stream of specific VXLAN encapsulated layer 2 frames can cause high CPU load, which could lead to network protocol operation issue and traffi...

CVE-2020-1684

CVE-2020-1684 affects Juniper Networks Junos OS on SRX Series. The issue is triggered when application identification inspection is enabled and specific HTTP traffic is processed, causing high CPU load and potential traffic interruption. Affected versions include SRX Series: 12.3X48 prior to 12.3...