Error: "Failed to Discover 1 of 1 Volume on the Destination Disk" Or "Failed to Discover 1 of 2 Volume on the Destination Disk"

After running the Imaging Wizard, when the PXE starts again, P2PVS displays the following error messages: "Failed to discover 1 of 1 volume on the destination disk!" Or "Failed to discover 1 of 2 volume on the destination disk!"...

Error: "vDisk is not available. Please check your network PXE boot configuration and restart Imaging Wizard" or "Red X" on Provisioning Server

After installing the Target Device Software and rebooting the following symptoms can be seen: A Red X is displayed on top of the vDisk Status Applet in the Tray Bar After running the Imaging Wizard and rebooting the following message is shown:"vDisk is not available. Please check your network PXE...

Errors: "Failed to Snapshot", "VSS_E_VOLUME_NOT_SUPPORTED"

When attempting to build an image from a Windows7 or Server 2008 Virtual Machine VM with Imaging Wizard or P2PVS, the following error message is displayed: "Failed to Snapshot" Imaging Wizard/P2PVS log shows the following error message: "VSSEVOLUMENOTSUPPORTED" and terminates with an error messag...

How to Image a Target Device Using the Imaging Wizard

This article describes how to image target device using the Imaging Wizard. Prerequisites Enable Windows Automount on Windows Enterprise Server operating systems. Disable Windows Autoplay. Remove any virtualization software before performing a conversion. Verify adequate free space exists on the...

PVS - Imaging Wizard fails when creating Vdisk. Error after restart 'Imaging wizard did not restart'

When attempting to create a vDisk, the Imaging Wizard gets as far as requiring a reboot, but after the restart returns the error 'Imaging wizard did not restart'...

A System Reserved partition is visible in a vDisk when it is created using the Imaging Wizard.

Using the Imaging Wizard a new vDisk is created. A drive letter is assigned to the System Reserved partition and it is visible in the new vDisk. It is expected behavior by design. The System Reserved partition should be invisible to users. Before publishing the vDisk to target devices, the drive...

Citrix Provisioning Services - Target Fails To BDM Boot When Running The Imaging Wizard

When using BDM to boot the Master Target Device to capture a new vDisk it fails to boot. With verbose mode enabled in the bootstrap you will see the Target download the bootstrap and then login to a PVS Server at which point it will sit at a black screen indefinitely...

PVS Imaging Wizard Fails With “ Failed to write disk” Message After It Finishes

Imaging Wizard fails with “ Failed to write disk” message after it finishes. The Imaging Wizard logs show: Failed to write disk \\.\PhysicalDrive1. Access is denied. 0x00000005...

PVS Imaging wizard failed to run on master target device

Error 1: PVS Imaging wizard failed to run with below error on master target device : The program can’t start because api-ms-win-crt-runtime-l1-1-0.dll is missing from your computer Error 2: imagingwizard.exe crashed when calling the following method: System.String.FormatSystem.IFormatProvider,...

BSOD Error: "STOP 0x0000007E CVhdMp.sys with Kaspersky antivirus

When booting from the Network, to run the Imaging Wizard or simply to boot from a vDisk, the following Blue Screen message is displayed: STOP 0x0000007E CVhdMp.sys Error: BNIStack failed, network stack could not be initialized...