CVE-2016-9372

In Wireshark 2.2.0 to 2.2.1, the Profinet I/O dissector could loop excessively, triggered by network traffic or a capture file. This was addressed in plugins/profinet/packet-pn-rtc-one.c by rejecting input with too many I/O objects...

CVE-2016-9372

In Wireshark 2.2.0 to 2.2.1, the Profinet I/O dissector could loop excessively, triggered by network traffic or a capture file. This was addressed in plugins/profinet/packet-pn-rtc-one.c by rejecting input with too many I/O objects...

Siemens Upper Profinet Discovery Service Denial of Service Vulnerability

Siemens fully integrated automation software TIA portal, Chinese name is Broadway, is Siemens Industry Automation Group released a new fully integrated automation software is widely used in tobacco, petrochemical, water and other important industrial control site. A denial of service vulnerabilit...

Siemens SIMATIC S7-300/1200/1500 CPU Denial of Service Vulnerability

Siemens SIMATIC S7-300, 1200 and 1500 CPUs are modular general-purpose controllers for the manufacturing industry from Siemens, Germany, and are widely used in tobacco, petrochemical, water and other important industrial control sites. A denial of service vulnerability exists in the Siemens SIMAT...

Siemens SIMATIC S7-300 CPU Denial of Service Vulnerability

Siemens SIMATIC S7-300 CPU is a modular general-purpose controller for the manufacturing industry from Siemens, Germany, and is widely used in important industrial control sites such as tobacco, petrochemical, and water. A denial of service vulnerability exists in the Siemens SIMATIC S7-300 CPU.T...

wireshark -- multiple vulnerabilities

Wireshark project reports: Wireshark project is releasing Wireshark 2.2.2, which addresses: wnpa-sec-2016-58: Profinet I/O long loop - CVE-2016-9372 wnpa-sec-2016-59: AllJoyn crash - CVE-2016-9374 wnpa-sec-2016-60: OpenFlow crash - CVE-2016-9376 wnpa-sec-2016-61: DCERPC crash - CVE-2016-9373...

KLA10905 Multiple denial of service vulnerabilities in Wireshark

Multiple serious vulnerabilities have been found in Wireshark. Malicious users can exploit these vulnerabilities to cause denial of service. These vulnerabilities can be exploited remotely via a specially designed files or packets. Below is a complete list of vulnerabilities 1. Lack of certain...

Siemens Profinet Scanner

This module will use Layer2 packets, known as Profinet Discovery packets, to detect all Siemens and sometimes other devices on a network. It is perfectly SCADA-safe, as there will only be ONE single packet sent out. Devices will respond with their IP configuration and hostnames. Created by XiaK...

CVE-2016-7112

A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions V1.03; Firmware variant IEC 104...

CVE-2016-7114

Siemens SIPROTEC 4/Compact EN100 Ethernet module family is affected by CVE-2016-7114 (Improper Authentication). The vulnerability allows remote attackers with network access to the device web interface (port 80) to possibly circumvent authentication and perform administrative operations, requirin...

CVE-2016-7112

CVE-2016-7112 is an Authentication Bypass vulnerability in the Siemens EN100 Ethernet module used with SIPROTEC 4/Compact and related equipment. Affected firmware variants PROFINET IO, Modbus TCP, DNP3 TCP, and IEC 104 in all SIPROTEC 4/Compact deployments allow remote attackers with access to th...

The vulnerability of the microprogramming software of Siemens Simatic S7-1200 programmable logic controllers allows a malicious actor to cause malfunctions during maintenance operations.

The software of the Siemens SIMATIC S7-1200 programmable logic controller contains a vulnerability. When exploited, it is possible to switch the device into an emergency mode by sending specially crafted PROFINET packets. This emergency mode persists until a hardware restart is performed...

CVE-2016-3949

Siemens SIMATIC S7-300 Profinet-enabled CPU devices with firmware before 3.2.12 and SIMATIC S7-300 Profinet-disabled CPU devices with firmware before 3.3.12 allow remote attackers to cause a denial of service defect-mode transition via crafted 1 ISO-TSAP or 2 Profibus packets...

CVE-2016-3949

Siemens SIMATIC S7-300 Profinet-enabled CPU devices with firmware before 3.2.12 and SIMATIC S7-300 Profinet-disabled CPU devices with firmware before 3.3.12 allow remote attackers to cause a denial of service defect-mode transition via crafted 1 ISO-TSAP or 2 Profibus packets...

Siemens Firmware Updates Patch SIMATIC Vulnerabilities

Siemens has provided firmware updates addressing vulnerabilities in two popular products lines, the SIMATIC WinCC flexible, and the SIMATIC S7-300 CPU family. The SIMATIC S7-300 flaw is a denial-of-service issue that could be remotely exploited to cause the device to go into defect mode, an...

CVE-2016-4785

A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions V1.03; Firmware variant IEC 104...

CVE-2016-4784

A vulnerability has been identified in firmware variant PROFINET IO for EN100 Ethernet module : All versions V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions V1.03; Firmware variant IEC 104...

Siemens SIMATIC S7-300 Denial-of-Service Vulnerability

OVERVIEW Siemens has identified a denial-of-service vulnerability in the SIMATIC S7-300 CPU family. The vulnerability was reported directly to Siemens by Mate J. Csorba of DNV GL, Marine Cybernetics Services, and Amund Sole of Norwegian University of Science and Technology. Siemens has produced a...

CVE-2015-5374

A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions V1.03; Firmware variant IEC 104...

CVE-2015-5374

CVE-2015-5374 affects Siemens SIPROTEC 4/Compact devices with EN100 Ethernet modules (PROFINET IO, Modbus TCP, DNP3 TCP, IEC 104 firmware) and SIPROTEC 6MU80 integration. The flaw is an improper input validation that allows specially crafted UDP packets to port 50000 to cause a denial-of-service,...