CVE-2020-1634

On High-End SRX Series devices, in specific configurations and when specific networking events or operator actions occur, an SPC receiving genuine multicast traffic may core. Subsequently, all FPCs in a chassis may reset causing a Denial of Service. This issue affects both IPv4 and IPv6. This iss...

CVE-2020-1629

A race condition vulnerability on Juniper Network Junos OS devices may cause the routing protocol daemon RPD process to crash and restart while processing a BGP NOTIFICATION message. This issue affects Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S6; 16.2 versions prior to 16.2R2-S11;...

CVE-2020-1630

A privilege escalation vulnerability in Juniper Networks Junos OS devices configured with dual Routing Engines RE, Virtual Chassis VC or high-availability cluster may allow a local authenticated low-privileged user with access to the shell to perform unauthorized configuration modification. This...

CVE-2020-1637

A vulnerability in Juniper Networks SRX Series device configured as a Junos OS Enforcer device may allow a user to access network resources that are not permitted by a UAC policy. This issue might occur when the IP address range configured in the Infranet Controller IC is configured as an IP...

CVE-2020-1638

The FPC Flexible PIC Concentrator of Juniper Networks Junos OS and Junos OS Evolved may restart after processing a specific IPv4 packet. Only packets destined to the device itself, successfully reaching the RE through existing edge and control plane filtering, will be able to cause the FPC restar...

CVE-2020-1639

When an attacker sends a specific crafted Ethernet Operation, Administration, and Maintenance Ethernet OAM packet to a target device, it may improperly handle the incoming malformed data and fail to sanitize this incoming data resulting in an overflow condition. This overflow condition in Juniper...

CVE-2020-1619

A privilege escalation vulnerability in Juniper Networks QFX10K Series, EX9200 Series, MX Series, and PTX Series with Next-Generation Routing Engine NG-RE, allows a local authenticated high privileged user to access the underlying WRL host. This issue only affects QFX10K Series with NG-RE, EX9200...

CVE-2020-1616

Due to insufficient server-side login attempt limit enforcement, a vulnerability in the SSH login service of Juniper Networks Juniper Advanced Threat Prevention JATP Series and Virtual JATP vJATP devices allows an unauthenticated, remote attacker to perform multiple login attempts in excess of th...

CVE-2020-1613

A vulnerability in the BGP FlowSpec implementation may cause a Juniper Networks Junos OS device to terminate an established BGP session upon receiving a specific BGP FlowSpec advertisement. The BGP NOTIFICATION message that terminates an established BGP session is sent toward the peer device that...

CVE-2020-1614

A Use of Hard-coded Credentials vulnerability exists in the NFX250 Series for the vSRX Virtual Network Function VNF instance, which allows an attacker to take control of the vSRX VNF instance if they have the ability to access an administrative service e.g. SSH on the VNF, either locally, or...

CVE-2020-1615

The factory configuration for vMX installations, as shipped, includes default credentials for the root account. Without proper modification of these default credentials by the administrator, an attacker could exploit these credentials and access the vMX instance without authorization. This issue...

CVE-2020-1616

Due to insufficient server-side login attempt limit enforcement, a vulnerability in the SSH login service of Juniper Networks Juniper Advanced Threat Prevention JATP Series and Virtual JATP vJATP devices allows an unauthenticated, remote attacker to perform multiple login attempts in excess of th...

CVE-2020-1617

This issue occurs on Juniper Networks Junos OS devices which do not support Advanced Forwarding Interface AFI / Advanced Forwarding Toolkit AFT. Devices using AFI and AFT are not exploitable to this issue. An improper initialization of memory in the packet forwarding architecture in Juniper...

CVE-2020-1618

On Juniper Networks EX and QFX Series, an authentication bypass vulnerability may allow a user connected to the console port to login as root without any password. This issue might only occur in certain scenarios: • At the first reboot after performing device factory reset using the command...

CVE-2020-1619

A privilege escalation vulnerability in Juniper Networks QFX10K Series, EX9200 Series, MX Series, and PTX Series with Next-Generation Routing Engine NG-RE, allows a local authenticated high privileged user to access the underlying WRL host. This issue only affects QFX10K Series with NG-RE, EX9200...

CVE-2020-1625

The kernel memory usage represented as "temp" via 'show system virtual-memory' may constantly increase when Integrated Routing and Bridging IRB is configured with multiple underlay physical interfaces, and one interface flaps. This memory leak can affect running daemons processes, leading to an...

CVE-2020-1626

A vulnerability in Juniper Networks Junos OS Evolved may allow an attacker to cause a Denial of Service DoS by sending a high rate of specific packets to the device, resulting in a pfemand process crash. The pfemand process is responsible for packet forwarding on the device. By continuously sendi...

Privilege escalation

A privilege escalation vulnerability in Juniper Networks QFX10K Series, EX9200 Series, MX Series, and PTX Series with Next-Generation Routing Engine NG-RE, allows a local authenticated high privileged user to access the underlying WRL host. This issue only affects QFX10K Series with NG-RE, EX9200...

Race condition

The FPC Flexible PIC Concentrator of Juniper Networks Junos OS and Junos OS Evolved may restart after processing a specific IPv4 packet. Only packets destined to the device itself, successfully reaching the RE through existing edge and control plane filtering, will be able to cause the FPC restar...

Design/Logic Flaw

A vulnerability in Juniper Networks SRX Series device configured as a Junos OS Enforcer device may allow a user to access network resources that are not permitted by a UAC policy. This issue might occur when the IP address range configured in the Infranet Controller IC is configured as an IP...