7028 matches found
Design/Logic Flaw
A vulnerability in Juniper Networks Junos OS running on the ACX5448 and ACX710 platforms may cause BFD sessions to flap when a high rate of transit ARP packets are received. This, in turn, may impact routing protocols and network stability, leading to a Denial of Service DoS condition. When a hig...
Input validation
Due to an improper Initialization vulnerability on Juniper Networks Junos OS QFX5100-96S devices with QFX 5e Series image installed, ddos-protection configuration changes will not take effect beyond the default DDoS Distributed Denial of Service settings when configured from the CLI. The DDoS...
Design/Logic Flaw
A vulnerability in Juniper Networks Junos OS ACX500 Series, ACX4000 Series, may allow an attacker to cause a Denial of Service DoS by sending a high rate of specific packets to the device, resulting in a Forwarding Engine Board FFEB crash. Continued receipt of these packets will sustain the Denia...
Remote code execution
NFX Series devices using Juniper Networks Junos OS are susceptible to a local code execution vulnerability thereby allowing an attacker to elevate their privileges via the Junos Device Management Daemon JDMD process. This issue affects Juniper Networks Junos OS on NFX Series: 18.1 version 18.1R1...
Design/Logic Flaw
An always-incorrect control flow implementation in the implicit filter terms of Juniper Networks Junos OS and Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 devices with affected Trio line cards allows an attacker to exploit an interdependency in the PFE UCODE...
Buffer overflow
A buffer size validation vulnerability in the overlayd service of Juniper Networks Junos OS may allow an unauthenticated remote attacker to send specially crafted packets to the device, triggering a partial Denial of Service DoS condition, or leading to remote code execution RCE. Continued receip...
Design/Logic Flaw
On Juniper Networks SRX Series devices with link aggregation lag configured, executing any operation that fetches Aggregated Ethernet AE interface statistics, including but not limited to SNMP GET requests, causes a slow kernel memory leak. If all the available memory is consumed, the traffic wil...
Cross site scripting
An Improper Neutralization of CRLF Sequences in HTTP Headers 'HTTP Response Splitting' weakness in J-web of Juniper Networks Junos OS leads to buffer overflows, segment faults, or other impacts, which allows an attacker to modify the integrity of the device and exfiltration information from the...
Design/Logic Flaw
Through routine static code analysis of the Juniper Networks Junos OS software codebase, the Secure Development Life Cycle team identified a Use After Free vulnerability in PFE packet processing on the QFX10002-60C switching platform. Exploitation of this vulnerability may allow a logically...
Null pointer dereference
A NULL Pointer Dereference vulnerability in the Captive Portal Content Delivery CPCD services daemon cpcd of Juniper Networks Junos OS on MX Series with MS-PIC, MS-SPC3, MS-MIC or MS-MPC allows an attacker to send malformed HTTP packets to the device thereby causing a Denial of Service DoS,...
Design/Logic Flaw
On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, Juniper Networks Dynamic Host Configuration Protocol Daemon JDHCPD process might crash with a core dump if a specific DHCPv6 packet is received, resulting in a restart of the daemon. The daemon...
Command injection
A vulnerability due to the improper handling of direct memory access DMA buffers on EX4300 switches on Juniper Networks Junos OS allows an attacker sending specific unicast frames to trigger a Denial of Service DoS condition by exhausting DMA buffers, causing the FPC to crash and the device to...
Hardcoded credentials
This issue is not applicable to NFX NextGen Software. On NFX Series devices the use of Hard-coded Credentials in Juniper Networks Junos OS allows an attacker to take over any instance of an NFX deployment. This issue is only exploitable through administrative interfaces. This issue affects: Junip...
Design/Logic Flaw
A vulnerability in the forwarding of transit TCPv6 packets received on the Ethernet management interface of Juniper Networks Junos OS allows an attacker to trigger a kernel panic, leading to a Denial of Service DoS. Continued receipt and processing of these transit packets will create a sustained...
Race condition
On PTX Series and QFX10k Series devices with the "inline-jflow" feature enabled, a use after free weakness in the Packet Forwarding Engine PFE microkernel architecture of Juniper Networks Junos OS may allow an attacker to cause a Denial of Service DoS condition whereby one or more Flexible PIC...
Race condition
A signal handler race condition exists in the Layer 2 Address Learning Daemon L2ALD of Juniper Networks Junos OS due to the absence of a specific protection mechanism to avoid a race condition which may allow an attacker to bypass the storm-control feature on devices. This issue is a corner case...
Hardcoded credentials
A Use of Hard-coded Credentials vulnerability in Juniper Networks Junos OS on Junos Fusion satellite devices allows an attacker who is local to the device to elevate their privileges and take control of the device. This issue affects: Juniper Networks Junos OS Junos Fusion Satellite Devices. 16.1...
Design/Logic Flaw
On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPCs Modular Port Concentrators where Integrated Routing and Bridging IRB interfaces are configured and mapped to a VPLS instance or a Bridge-Domain, certain Layer 2 network events at Customer Edge CE devices may cause memo...
Code injection
On SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3, vSRX Series devices using tenant services on Juniper Networks Junos OS, due to incorrect permission scheme assigned to tenant system administrators, a tenant system administrator may inadvertently send their network traffic to...
Command injection
When a MX Series is configured as a Broadband Network Gateway BNG based on Layer 2 Tunneling Protocol L2TP, executing certain CLI command may cause the system to run out of disk space, excessive disk usage may cause other complications. An administrator can use the following CLI command to monito...