8072 matches found
Race condition
On Juniper Networks Junos OS devices configured with DHCPv6 relay enabled, receipt of a specific DHCPv6 packet might crash the jdhcpd daemon. The jdhcpd daemon automatically restarts without intervention, but continuous receipt of specific crafted DHCP messages will repeatedly crash jdhcpd, leadi...
Design/Logic Flaw
On Juniper Networks EX2300 Series, receipt of a stream of specific multicast packets by the layer2 interface can cause high CPU load, which could lead to traffic interruption. This issue occurs when multicast packets are received by the layer 2 interface. To check if the device has high CPU load...
Memory corruption
On Juniper Networks Junos OS devices, a specific SNMP OID poll causes a memory leak which over time leads to a kernel crash vmcore. Prior to the kernel crash other processes might be impacted, such as failure to establish SSH connection to the device. The administrator can monitor the output of t...
Design/Logic Flaw
On Juniper Networks Junos OS devices configured as a DHCP forwarder, the Juniper Networks Dynamic Host Configuration Protocol Daemon jdhcp process might crash when receiving a malformed DHCP packet. This issue only affects devices configured as DHCP forwarder with forward-only option, that forwar...
Design/Logic Flaw
On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in Ethernet VPN EVPN-Virtual Extensible LAN VXLAN configuration, receipt of a stream of specific VXLAN encapsulated layer 2 frames can cause high CPU load, which could lead to network protocol operation issue and traffi...
Design/Logic Flaw
On SRX Series devices, a vulnerability in the key-management-daemon kmd daemon of Juniper Networks Junos OS allows an attacker to spoof packets targeted to IPSec peers before a security association SA is established thereby causing a failure to set up the IPSec channel. Sustained receipt of these...
Race condition
When DNS filtering is enabled on Juniper Networks Junos MX Series with one of the following cards MS-PIC, MS-MIC or MS-MPC, an incoming stream of packets processed by the Multiservices PIC Management Daemon mspmand process might be bypassed due to a race condition. Due to this vulnerability,...
Design/Logic Flaw
On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, Juniper Networks Dynamic Host Configuration Protocol Daemon JDHCPD process might crash with a core dump if a malformed DHCPv6 packet is received, resulting with the restart of the daemon. This issue on...
Design/Logic Flaw
On Juniper Networks Junos OS devices, receipt of a malformed IPv6 packet may cause the system to crash and restart vmcore. This issue can be trigged by a malformed IPv6 packet destined to the Routing Engine. An attacker can repeatedly send the offending packet resulting in an extended Denial of...
Design/Logic Flaw
On Juniper Networks Junos OS and Junos OS Evolved devices, BGP session flapping can lead to a routing process daemon RPD crash and restart, limiting the attack surface to configured BGP peers. This issue only affects devices with BGP damping in combination with accepted-prefix-limit configuration...
Code injection
When DNS filtering is enabled on Juniper Networks Junos MX Series with one of the following cards MS-PIC, MS-MIC or MS-MPC, an incoming stream of packets processed by the Multiservices PIC Management Daemon mspmand process, responsible for managing "URL Filtering service", may crash, causing the...
Input validation
An input validation vulnerability exists in Juniper Networks Junos OS, allowing an attacker to crash the srxpfe process, causing a Denial of Service DoS through the use of specific maintenance commands. The srxpfe process restarts automatically, but continuous execution of the commands could lead...
Information disclosure
Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a vulnerability. Notes: The fix resolved an issue when MACsec replay-protect was enabled and the replay-protect-window value was set to zero, Junos OS w...
Design/Logic Flaw
When configuring stateless firewall filters in Juniper Networks EX4600 and QFX 5000 Series devices using Virtual Extensible LAN protocol VXLAN, the discard action will fail to discard traffic under certain conditions. Given a firewall filter configuration similar to: family ethernet-switching...
Cross site scripting
Insufficient Cross-Site Scripting XSS protection in Juniper Networks J-Web and web based HTTP/HTTPS services allows an unauthenticated attacker to hijack the target user's HTTP/HTTPS session and perform administrative actions on the Junos device as the targeted user. This issue only affects Junip...
Design/Logic Flaw
On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in a Virtual Chassis configuration, receipt of a stream of specific layer 2 frames can cause high CPU load, which could lead to traffic interruption. This issue does not occur when the device is deployed in Stand Alone...
Command injection
On Juniper Networks PTX and QFX Series devices with packet sampling configured using tunnel-observation mpls-over-udp, sampling of a malformed packet can cause the Kernel Routing Table KRT queue to become stuck. KRT is the module within the Routing Process Daemon RPD that synchronized the routing...
Default configuration
The system console configuration option 'log-out-on-disconnect' In Juniper Networks Junos OS Evolved fails to log out an active CLI session when the console cable is disconnected. This could allow a malicious attacker with physical access to the console the ability to resume a previous interactiv...
Input validation
The DHCPv6 Relay-Agent service, part of the Juniper Enhanced jdhcpd daemon shipped with Juniper Networks Junos OS has an Improper Input Validation vulnerability which will result in a Denial of Service DoS condition when a DHCPv6 client sends a specific DHPCv6 message allowing an attacker to...
Design/Logic Flaw
On Juniper Networks Junos OS and Junos OS Evolved platforms with EVPN configured, receipt of specific BGP packets causes a slow memory leak. If the memory is exhausted the rpd process might crash. If the issue occurs, the memory leak could be seen by executing the "show task memory detail | match...