The VDSM service is required by a Virtualization Manager to manage the Linux hosts. VDSM manages and monitors the host's storage, memory and networks as well as virtual machine creation, other host administration tasks, statistics gathering, and log collection.
Security Fix(es):
* A flaw was found in the implementation of the "fill buffer", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)
* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)
* Microprocessors use a ‘load port’ subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU’s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)
* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)
For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.
{"openvas": [{"lastseen": "2019-06-05T01:41:02", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "openvas", "title": "Ubuntu Update for intel-microcode USN-3977-1", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310844011", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310844011", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.844011\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12130\", \"CVE-2018-12127\", \"CVE-2018-12126\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-15 02:03:18 +0000 (Wed, 15 May 2019)\");\n script_name(\"Ubuntu Update for intel-microcode USN-3977-1\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Ubuntu Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/ubuntu_linux\", \"ssh/login/packages\", re:\"ssh/login/release=(UBUNTU18\\.10|UBUNTU19\\.04|UBUNTU18\\.04 LTS|UBUNTU16\\.04 LTS)\");\n\n script_xref(name:\"USN\", value:\"3977-1\");\n script_xref(name:\"URL\", value:\"http://www.ubuntu.com/usn/usn-3977-1/\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'intel-microcode'\n package(s) announced via the USN-3977-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan\nHorea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos,\nCristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss\ndiscovered that memory previously stored in microarchitectural fill buffers\nof an Intel CPU core may be exposed to a malicious process that is\nexecuting on the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan\nvan Schaik, Alyssa Milburn, Sebastian sterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, and Cristiano Giuffrida discovered that memory\npreviously stored in microarchitectural load ports of an Intel CPU core may\nbe exposed to a malicious process that is executing on the same CPU core. A\nlocal attacker could use this to expose sensitive information.\n(CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel\nMoghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel\nGruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory\npreviously stored in microarchitectural store buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same CPU\ncore. A local attacker could use this to expose sensitive information.\n(CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and\nCristiano Giuffrida discovered that uncacheable memory previously stored in\nmicroarchitectural buffers of an Intel CPU core may be exposed to a\nmalicious process that is executing on the same CPU core. A local attacker\ncould use this to expose sensitive information. (CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'intel-microcode' package(s) on Ubuntu 19.04, Ubuntu 18.10, Ubuntu 18.04 LTS, Ubuntu 16.04 LTS.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nrelease = dpkg_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"UBUNTU18.10\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.18.10.1\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU19.04\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.19.04.1\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU18.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.18.04.2\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU16.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.16.04.1\", rls:\"UBUNTU16.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-03-30T16:57:20", "description": "The remote host is missing an update for the Huawei EulerOS\n ", "cvss3": {}, "published": "2020-01-23T00:00:00", "type": "openvas", "title": "Huawei EulerOS: Security Advisory for qemu (EulerOS-SA-2019-2300)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-03-26T00:00:00", "id": "OPENVAS:1361412562311220192300", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562311220192300", "sourceData": "# Copyright (C) 2020 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.1.2.2019.2300\");\n script_version(\"2020-03-26T11:51:34+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-03-26 11:51:34 +0000 (Thu, 26 Mar 2020)\");\n script_tag(name:\"creation_date\", value:\"2020-01-23 12:45:50 +0000 (Thu, 23 Jan 2020)\");\n script_name(\"Huawei EulerOS: Security Advisory for qemu (EulerOS-SA-2019-2300)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2020 Greenbone Networks GmbH\");\n script_family(\"Huawei EulerOS Local Security Checks\");\n script_dependencies(\"gb_huawei_euleros_consolidation.nasl\");\n script_mandatory_keys(\"ssh/login/euleros\", \"ssh/login/rpms\", re:\"ssh/login/release=EULEROS-2\\.0SP8\");\n\n script_xref(name:\"EulerOS-SA\", value:\"2019-2300\");\n script_xref(name:\"URL\", value:\"https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-2300\");\n script_xref(name:\"URL\", value:\"https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-update-guidance_05132019.pdf\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the Huawei EulerOS\n 'qemu' package(s) announced via the EulerOS-SA-2019-2300 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12126)\n\nMicroarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12127)\n\nMicroarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12130)\n\nMicroarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'qemu' package(s) on Huawei EulerOS V2.0SP8.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"EULEROS-2.0SP8\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-audio-alsa\", rpm:\"qemu-audio-alsa~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-audio-oss\", rpm:\"qemu-audio-oss~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-audio-pa\", rpm:\"qemu-audio-pa~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-audio-sdl\", rpm:\"qemu-audio-sdl~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-curl\", rpm:\"qemu-block-curl~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-dmg\", rpm:\"qemu-block-dmg~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-gluster\", rpm:\"qemu-block-gluster~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-iscsi\", rpm:\"qemu-block-iscsi~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-nfs\", rpm:\"qemu-block-nfs~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-rbd\", rpm:\"qemu-block-rbd~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-ssh\", rpm:\"qemu-block-ssh~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-common\", rpm:\"qemu-common~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-img\", rpm:\"qemu-img~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-kvm\", rpm:\"qemu-kvm~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-system-aarch64\", rpm:\"qemu-system-aarch64~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-system-aarch64-core\", rpm:\"qemu-system-aarch64-core~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ui-curses\", rpm:\"qemu-ui-curses~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ui-gtk\", rpm:\"qemu-ui-gtk~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ui-sdl\", rpm:\"qemu-ui-sdl~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-03-30T16:55:09", "description": "The remote host is missing an update for the Huawei EulerOS\n ", "cvss3": {}, "published": "2020-01-23T00:00:00", "type": "openvas", "title": "Huawei EulerOS: Security Advisory for libvirt (EulerOS-SA-2019-2289)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-03-26T00:00:00", "id": "OPENVAS:1361412562311220192289", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562311220192289", "sourceData": "# Copyright (C) 2020 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.1.2.2019.2289\");\n script_version(\"2020-03-26T11:51:34+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-03-26 11:51:34 +0000 (Thu, 26 Mar 2020)\");\n script_tag(name:\"creation_date\", value:\"2020-01-23 12:45:37 +0000 (Thu, 23 Jan 2020)\");\n script_name(\"Huawei EulerOS: Security Advisory for libvirt (EulerOS-SA-2019-2289)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2020 Greenbone Networks GmbH\");\n script_family(\"Huawei EulerOS Local Security Checks\");\n script_dependencies(\"gb_huawei_euleros_consolidation.nasl\");\n script_mandatory_keys(\"ssh/login/euleros\", \"ssh/login/rpms\", re:\"ssh/login/release=EULEROS-2\\.0SP8\");\n\n script_xref(name:\"EulerOS-SA\", value:\"2019-2289\");\n script_xref(name:\"URL\", value:\"https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-2289\");\n script_xref(name:\"URL\", value:\"https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-update-guidance_05132019.pdf\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the Huawei EulerOS\n 'libvirt' package(s) announced via the EulerOS-SA-2019-2289 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12126)\n\nMicroarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12127)\n\nMicroarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12130)\n\nMicroarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on Huawei EulerOS V2.0SP8.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"EULEROS-2.0SP8\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-bash-completion\", rpm:\"libvirt-bash-completion~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client\", rpm:\"libvirt-client~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon\", rpm:\"libvirt-daemon~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-network\", rpm:\"libvirt-daemon-config-network~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-nwfilter\", rpm:\"libvirt-daemon-config-nwfilter~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-interface\", rpm:\"libvirt-daemon-driver-interface~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-network\", rpm:\"libvirt-daemon-driver-network~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nodedev\", rpm:\"libvirt-daemon-driver-nodedev~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nwfilter\", rpm:\"libvirt-daemon-driver-nwfilter~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-qemu\", rpm:\"libvirt-daemon-driver-qemu~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-secret\", rpm:\"libvirt-daemon-driver-secret~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage\", rpm:\"libvirt-daemon-driver-storage~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-core\", rpm:\"libvirt-daemon-driver-storage-core~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-disk\", rpm:\"libvirt-daemon-driver-storage-disk~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-iscsi\", rpm:\"libvirt-daemon-driver-storage-iscsi~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-iscsi-direct\", rpm:\"libvirt-daemon-driver-storage-iscsi-direct~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-logical\", rpm:\"libvirt-daemon-driver-storage-logical~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-mpath\", rpm:\"libvirt-daemon-driver-storage-mpath~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-scsi\", rpm:\"libvirt-daemon-driver-storage-scsi~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-kvm\", rpm:\"libvirt-daemon-kvm~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-libs\", rpm:\"libvirt-libs~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-31T16:53:48", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-29T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1468-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852523", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852523", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852523\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-29 02:00:49 +0000 (Wed, 29 May 2019)\");\n script_name(\"openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1468-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap15\\.0\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1468-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-05/msg00066.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'ucode-intel'\n package(s) announced via the openSUSE-SU-2019:1468-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for ucode-intel fixes the following issues:\n\n The Intel CPU Microcode was updated to the official QSR 2019.1 Microcode\n release (bsc#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127\n CVE-2019-11091)\n\n - --- new platforms ---------------------------------------- VLV\n C0 6-37-8/02 00000838 Atom Z series VLV C0\n 6-37-8/0C 00000838 Celeron N2xxx, Pentium N35xx VLV\n D0 6-37-9/0F 0000090c Atom E38xx CHV C0\n 6-4c-3/01 00000368 Atom X series CHV D0\n 6-4c-4/01 00000411 Atom X series\n\n read missing in last update:\n\n BDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4, Core\n i7-69xx/68xx\n\n This update was imported from the SUSE:SLE-15:Update update project.\n\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1468=1\");\n\n script_tag(name:\"affected\", value:\"'ucode-intel' package(s) on openSUSE Leap 15.0.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap15.0\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel\", rpm:\"ucode-intel~20190514~lp150.2.21.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:07", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "Debian Security Advisory DSA 4444-1 (linux - security update)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310704444", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310704444", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.704444\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:00:12 +0000 (Thu, 16 May 2019)\");\n script_name(\"Debian Security Advisory DSA 4444-1 (linux - security update)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Debian Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/debian_linux\", \"ssh/login/packages\", re:\"ssh/login/release=DEB9\");\n\n script_xref(name:\"URL\", value:\"https://www.debian.org/security/2019/dsa-4444.html\");\n script_xref(name:\"URL\", value:\"https://security-tracker.debian.org/tracker/DSA-4444-1\");\n script_xref(name:\"URL\", value:\"https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'linux'\n package(s) announced via the DSA-4444-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Multiple researchers have discovered vulnerabilities in the way the\nIntel processor designs have implemented speculative forwarding of data\nfilled into temporary microarchitectural structures (buffers). This\nflaw could allow an attacker controlling an unprivileged process to\nread sensitive information, including from the kernel and all other\nprocesses running on the system or cross guest/host boundaries to read\nhost memory.\n\nSee the references for more details.\n\nTo fully resolve these vulnerabilities it is also necessary to install\nupdated CPU microcode. An updated intel-microcode package (only\navailable in Debian non-free) will be provided via a separate DSA. The\nupdated CPU microcode may also be available as part of a system firmware\n('BIOS') update.\n\nIn addition, this update includes a fix for a regression causing\ndeadlocks inside the loopback driver, which was introduced by the update\nto 4.9.168 in the last Stretch point release.\");\n\n script_tag(name:\"affected\", value:\"'linux' package(s) on Debian Linux.\");\n\n script_tag(name:\"solution\", value:\"For the stable distribution (stretch), these problems have been fixed in\nversion 4.9.168-1+deb9u2.\n\nWe recommend that you upgrade your linux packages.\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nres = \"\";\nreport = \"\";\nif(!isnull(res = isdpkgvuln(pkg:\"hyperv-daemons\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"libcpupower-dev\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"libcpupower1\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"libusbip-dev\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-compiler-gcc-6-arm\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-compiler-gcc-6-s390\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-compiler-gcc-6-x86\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-cpupower\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-doc-4.9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-kbuild-4.9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-libc-dev\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-manual-4.9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-perf-4.9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-source-4.9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-4\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-5\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-6\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-7\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-8\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"usbip\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\n\nif(report != \"\") {\n security_message(data:report);\n} else if(__pkg_match) {\n exit(99);\n}\n\nexit(0);", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-29T19:29:15", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "Debian LTS: Security Advisory for linux-4.9 (DLA-1787-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-29T00:00:00", "id": "OPENVAS:1361412562310891787", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310891787", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.891787\");\n script_version(\"2020-01-29T08:22:52+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-29 08:22:52 +0000 (Wed, 29 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:00:21 +0000 (Thu, 16 May 2019)\");\n script_name(\"Debian LTS: Security Advisory for linux-4.9 (DLA-1787-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Debian Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/debian_linux\", \"ssh/login/packages\", re:\"ssh/login/release=DEB8\");\n\n script_xref(name:\"URL\", value:\"https://lists.debian.org/debian-lts-announce/2019/05/msg00017.html\");\n script_xref(name:\"URL\", value:\"https://security-tracker.debian.org/tracker/DLA-1787-1\");\n script_xref(name:\"URL\", value:\"https://bugs.debian.org/928125\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'linux-4.9'\n package(s) announced via the DLA-1787-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Multiple researchers have discovered vulnerabilities in the way the\nIntel processor designs have implemented speculative forwarding of data\nfilled into temporary microarchitectural structures (buffers). This\nflaw could allow an attacker controlling an unprivileged process to\nread sensitive information, including from the kernel and all other\nprocesses running on the system or cross guest/host boundaries to read\nhost memory.\n\nSee the references for more details.\n\nTo fully resolve these vulnerabilities it is also necessary to install\nupdated CPU microcode. An updated intel-microcode package (only\navailable in Debian non-free) will be provided via a separate DLA. The\nupdated CPU microcode may also be available as part of a system firmware\n('BIOS') update.\n\nIn addition, this update includes a fix for a regression causing\ndeadlocks inside the loopback driver, which was introduced by the update\nto 4.9.168 in the last security update.\");\n\n script_tag(name:\"affected\", value:\"'linux-4.9' package(s) on Debian Linux.\");\n\n script_tag(name:\"solution\", value:\"For Debian 8 'Jessie', these problems have been fixed in version\n4.9.168-1+deb9u2~deb8u1.\n\nWe recommend that you upgrade your linux-4.9 packages.\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nres = \"\";\nreport = \"\";\nif(!isnull(res = isdpkgvuln(pkg:\"linux-compiler-gcc-4.9-arm\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-doc-4.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-all\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-all-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-all-armel\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-all-armhf\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-all-i386\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-common\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-common-rt\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-all\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-all-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-all-armel\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-all-armhf\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-all-i386\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-common\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-common-rt\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-all\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-all-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-all-armel\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-all-armhf\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-all-i386\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-common\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-common-rt\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-kbuild-4.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-manual-4.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-perf-4.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-source-4.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-0.bpo.7\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-0.bpo.8\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-0.bpo.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\n\nif(report != \"\") {\n security_message(data:report);\n} else if(__pkg_match) {\n exit(99);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:05", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "CentOS Update for libvirt CESA-2019:1177 centos7 ", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310883056", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310883056", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.883056\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:01:08 +0000 (Thu, 16 May 2019)\");\n script_name(\"CentOS Update for libvirt CESA-2019:1177 centos7 \");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"CentOS Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/centos\", \"ssh/login/rpms\", re:\"ssh/login/release=CentOS7\");\n\n script_xref(name:\"CESA\", value:\"2019:1177\");\n script_xref(name:\"URL\", value:\"http://lists.centos.org/pipermail/centos-announce/2019-May/023313.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'libvirt'\n package(s) announced via the CESA-2019:1177 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"The libvirt library contains a C API for managing and interacting with the\nvirtualization capabilities of Linux and other operating systems. In\naddition, libvirt provides tools for remote management of virtualized\nsystems.\n\nSecurity Fix(es):\n\n * A flaw was found in the implementation of the 'fill buffer', a mechanism\nused by modern CPUs when a cache-miss is made on L1 CPU cache. If an\nattacker can generate a load operation that would create a page fault, the\nexecution will continue speculatively with incorrect data from the fill\nbuffer while the data is fetched from higher level caches. This response\ntime can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n * Modern Intel microprocessors implement hardware-level micro-optimizations\nto improve the performance of writing data back to CPU caches. The write\noperation is split into STA (STore Address) and STD (STore Data)\nsub-operations. These sub-operations allow the processor to hand-off\naddress generation logic into these sub-operations for optimized writes.\nBoth of these sub-operations write to a shared distributed processor\nstructure called the 'processor store buffer'. As a result, an\nunprivileged attacker could use this flaw to read private data resident\nwithin the CPU's processor store buffer. (CVE-2018-12126)\n\n * Microprocessors use a load port subcomponent to perform load operations\nfrom memory or IO. During a load operation, the load port receives data\nfrom the memory or IO subsystem and then provides the data to the CPU\nregisters and operations in the CPUs pipelines. Stale load operations\nresults are stored in the 'load port' table until overwritten by newer\noperations. Certain load-port operations triggered by an attacker can be\nused to reveal data about previous stale requests leaking data back to the\nattacker via a timing side-channel. (CVE-2018-12127)\n\n * Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable information\ndisclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS\nscore, acknowledgments, and other related information, refer to the CVE\npage(s) listed in the References section.\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on CentOS 7.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"CentOS7\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt\", rpm:\"libvirt~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-admin\", rpm:\"libvirt-admin~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-bash-completion\", rpm:\"libvirt-bash-completion~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client\", rpm:\"libvirt-client~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon\", rpm:\"libvirt-daemon~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-network\", rpm:\"libvirt-daemon-config-network~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-nwfilter\", rpm:\"libvirt-daemon-config-nwfilter~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-interface\", rpm:\"libvirt-daemon-driver-interface~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-lxc\", rpm:\"libvirt-daemon-driver-lxc~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-network\", rpm:\"libvirt-daemon-driver-network~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nodedev\", rpm:\"libvirt-daemon-driver-nodedev~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nwfilter\", rpm:\"libvirt-daemon-driver-nwfilter~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-qemu\", rpm:\"libvirt-daemon-driver-qemu~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-secret\", rpm:\"libvirt-daemon-driver-secret~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage\", rpm:\"libvirt-daemon-driver-storage~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-core\", rpm:\"libvirt-daemon-driver-storage-core~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-disk\", rpm:\"libvirt-daemon-driver-storage-disk~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-gluster\", rpm:\"libvirt-daemon-driver-storage-gluster~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-iscsi\", rpm:\"libvirt-daemon-driver-storage-iscsi~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-logical\", rpm:\"libvirt-daemon-driver-storage-logical~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-mpath\", rpm:\"libvirt-daemon-driver-storage-mpath~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-rbd\", rpm:\"libvirt-daemon-driver-storage-rbd~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-scsi\", rpm:\"libvirt-daemon-driver-storage-scsi~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-kvm\", rpm:\"libvirt-daemon-kvm~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-lxc\", rpm:\"libvirt-daemon-lxc~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-devel\", rpm:\"libvirt-devel~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-docs\", rpm:\"libvirt-docs~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-libs\", rpm:\"libvirt-libs~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-lock-sanlock\", rpm:\"libvirt-lock-sanlock~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-login-shell\", rpm:\"libvirt-login-shell~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-nss\", rpm:\"libvirt-nss~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-03-14T17:08:46", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-21T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1408-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852507", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852507", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852507\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-21 02:01:10 +0000 (Tue, 21 May 2019)\");\n script_name(\"openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1408-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap42\\.3\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1408-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-05/msg00042.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'ucode-intel'\n package(s) announced via the openSUSE-SU-2019:1408-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for ucode-intel fixes the following issues:\n\n This update contains the Intel QSR 2019.1 Microcode release (boo#1111331\n CVE-2018-12126 CVE-2018-12130 CVE-2018-12127 CVE-2019-11091)\n\n Release notes:\n\n - Processor Identifier Version Products\n\n - Model Stepping F-MO-S/PI Old->New\n\n - ---- new platforms ----------------------------------------\n\n - CLX-SP B1 6-55-7/bf 05000021 Xeon Scalable Gen2\n\n - ---- updated platforms ------------------------------------\n\n - SNB D2/G1/Q0 6-2a-7/12 0000002e->0000002f Core Gen2\n\n - IVB E1/L1 6-3a-9/12 00000020->00000021 Core Gen3\n\n - HSW C0 6-3c-3/32 00000025->00000027 Core Gen4\n\n - BDW-U/Y E0/F0 6-3d-4/c0 0000002b->0000002d Core Gen5\n\n - IVB-E/EP C1/M1/S1 6-3e-4/ed 0000042e->0000042f Core Gen3 X Series,\n Xeon E5 v2\n\n - IVB-EX D1 6-3e-7/ed 00000714->00000715 Xeon E7 v2\n\n - HSX-E/EP Cx/M1 6-3f-2/6f 00000041->00000043 Core Gen4 X series,\n Xeon E5 v3\n\n - HSX-EX E0 6-3f-4/80 00000013->00000014 Xeon E7 v3\n\n - HSW-U C0/D0 6-45-1/72 00000024->00000025 Core Gen4\n\n - HSW-H C0 6-46-1/32 0000001a->0000001b Core Gen4\n\n - BDW-H/E3 E0/G0 6-47-1/22 0000001e->00000020 Core Gen5\n\n - SKL-U/Y D0/K1 6-4e-3/c0 000000c6->000000cc Core Gen6\n\n - SKX-SP H0/M0/U0 6-55-4/b7 0200005a->0000005e Xeon Scalable\n\n - SKX-D M1 6-55-4/b7 0200005a->0000005e Xeon D-21xx\n\n - BDX-DE V1 6-56-2/10 00000019->0000001a Xeon D-1520/40\n\n - BDX-DE V2/3 6-56-3/10 07000016->07000017 Xeon\n D-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19\n\n - BDX-DE Y0 6-56-4/10 0f000014->0f000015 Xeon\n D-1557/59/67/71/77/81/87\n\n - BDX-NS A0 6-56-5/10 0e00000c->0e00000d Xeon\n D-1513N/23/33/43/53\n\n - APL D0 6-5c-9/03 00000036->00000038 Pentium N/J4xxx,\n Celeron N/J3xxx, Atom x5/7-E39xx\n\n - SKL-H/S R0/N0 6-5e-3/36 000000c6->000000cc Core Gen6, Xeon E3 v5\n\n - DNV B0 6-5f-1/01 00000024->0000002e Atom Processor C\n Series\n\n - GLK B0 6-7a-1/01 0000002c->0000002e Pentium Silver\n N/J5xxx, Celeron N/J4xxx\n\n - AML-Y22 H0 6-8e-9/10 0000009e->000000b4 Core Gen8 Mobile\n\n - KBL-U/Y H0 6-8e-9/c0 0000009a->000000b4 Core Gen7 Mobile\n\n - CFL-U43e D0 6-8e-a/c0 0000009e->000000b4 Core Gen8 Mobile\n\n - WHL-U W0 6-8e-b/d0 000000a4->000000b8 Core Gen8 Mobile\n\n - WHL-U V0 6-8e-d/94 000000b2->000000b8 Core Gen8 Mobile\n\n - KBL-G/H/S/E3 B0 6-9e-9/2a 0000009a->00000 ...\n\n Description truncated. Please see the references for more information.\");\n\n script_tag(name:\"affected\", value:\"'ucode-intel' package(s) on openSUSE Leap 42.3.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap42.3\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel\", rpm:\"ucode-intel~20190514~32.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel-blob\", rpm:\"ucode-intel-blob~20190514~32.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel-debuginfo\", rpm:\"ucode-intel-debuginfo~20190514~32.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel-debugsource\", rpm:\"ucode-intel-debugsource~20190514~32.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:03", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-23T00:00:00", "type": "openvas", "title": "Ubuntu Update for intel-microcode USN-3977-2", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310844021", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310844021", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.844021\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12130\", \"CVE-2018-12127\", \"CVE-2018-12126\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-23 02:00:30 +0000 (Thu, 23 May 2019)\");\n script_name(\"Ubuntu Update for intel-microcode USN-3977-2\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Ubuntu Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/ubuntu_linux\", \"ssh/login/packages\", re:\"ssh/login/release=(UBUNTU18\\.10|UBUNTU19\\.04|UBUNTU18\\.04 LTS|UBUNTU16\\.04 LTS)\");\n\n script_xref(name:\"USN\", value:\"3977-2\");\n script_xref(name:\"URL\", value:\"https://lists.ubuntu.com/archives/ubuntu-security-announce/2019-May/004916.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'intel-microcode'\n package(s) announced via the USN-3977-2 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"USN-3977-1 provided mitigations for Microarchitectural Data Sampling\n(MDS) vulnerabilities in Intel Microcode for a large number of Intel\nprocessor families. This update provides the corresponding updated\nmicrocode mitigations for Intel Cherry Trail and Bay Trail processor\nfamilies.\n\nOriginal advisory details:\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan\nHorea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa\nMilburn, Sebastian \u00d6sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos,\nCristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss\ndiscovered that memory previously stored in microarchitectural fill buffers\nof an Intel CPU core may be exposed to a malicious process that is\nexecuting on the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan\nvan Schaik, Alyssa Milburn, Sebastian \u00d6sterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, and Cristiano Giuffrida discovered that memory\npreviously stored in microarchitectural load ports of an Intel CPU core may\nbe exposed to a malicious process that is executing on the same CPU core. A\nlocal attacker could use this to expose sensitive information.\n(CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel\nMoghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel\nGruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory\npreviously stored in microarchitectural store buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same CPU\ncore. A local attacker could use this to expose sensitive information.\n(CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian \u00d6sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and\nCristiano Giuffrida discovered that uncacheable memory previously stored in\nmicroarchitectural buffers of an Intel CPU core may be exposed to a\nmalicious process that is executing on the same CPU core. A local attacker\ncould use this to expose sensitive information. (CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'intel-microcode' package(s) on Ubuntu 19.04, Ubuntu 18.10, Ubuntu 18.04 LTS, Ubuntu 16.04 LTS.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nrelease = dpkg_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"UBUNTU18.10\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.18.10.2\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU19.04\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.19.04.3\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU18.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.18.04.3\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU16.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.16.04.2\", rls:\"UBUNTU16.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-31T16:53:01", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for xen (openSUSE-SU-2019:1403-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852502", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852502", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852502\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-17 02:00:46 +0000 (Fri, 17 May 2019)\");\n script_name(\"openSUSE: Security Advisory for xen (openSUSE-SU-2019:1403-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap15\\.0\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1403-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-05/msg00038.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'xen'\n package(s) announced via the openSUSE-SU-2019:1403-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for xen fixes the following issues:\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the XEN Hypervisor adjustments, that additionally\n also use CPU Microcode updates.\n\n The mitigation can be controlled via the 'mds' commandline option, see the\n documentation.\n\n - Added code to change LIBXL_HOTPLUG_TIMEOUT at runtime.\n\n The included README has details about the impact of this change\n (bsc#1120095)\n\n - Fixes in Live migrating PV domUs\n\n An earlier change broke live migration of PV domUs without a device\n model. The migration would stall for 10 seconds while the domU was paused,\n which caused network connections to drop. Fix this by tracking the need\n for a device model within libxl. (bsc#1079730, bsc#1098403, bsc#1111025)\n\n - Libvirt segfault when crash triggered on top of HVM guest (bsc#1120067)\n\n This update was imported from the SUSE:SLE-15:Update update project.\n\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1403=1\");\n\n script_tag(name:\"affected\", value:\"'xen' package(s) on openSUSE Leap 15.0.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap15.0\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-debugsource\", rpm:\"xen-debugsource~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-devel\", rpm:\"xen-devel~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-libs\", rpm:\"xen-libs~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-libs-debuginfo\", rpm:\"xen-libs-debuginfo~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-tools-domU\", rpm:\"xen-tools-domU~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-tools-domU-debuginfo\", rpm:\"xen-tools-domU-debuginfo~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen\", rpm:\"xen~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-doc-html\", rpm:\"xen-doc-html~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-libs-32bit\", rpm:\"xen-libs-32bit~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-libs-32bit-debuginfo\", rpm:\"xen-libs-32bit-debuginfo~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-tools\", rpm:\"xen-tools~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-tools-debuginfo\", rpm:\"xen-tools-debuginfo~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-31T16:47:01", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-06-04T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for libvirt (openSUSE-SU-2019:1505-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852535", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852535", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852535\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-06-04 02:00:54 +0000 (Tue, 04 Jun 2019)\");\n script_name(\"openSUSE: Security Advisory for libvirt (openSUSE-SU-2019:1505-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap15\\.0\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1505-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-06/msg00014.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'libvirt'\n package(s) announced via the openSUSE-SU-2019:1505-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for libvirt fixes the following issues:\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the libvirt adjustments, that pass through the new\n 'md-clear' CPU flag (bsc#1135273).\n\n This update was imported from the SUSE:SLE-15:Update update project.\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1505=1\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on openSUSE Leap 15.0.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap15.0\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt\", rpm:\"libvirt~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-admin\", rpm:\"libvirt-admin~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-admin-debuginfo\", rpm:\"libvirt-admin-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client\", rpm:\"libvirt-client~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client-debuginfo\", rpm:\"libvirt-client-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon\", rpm:\"libvirt-daemon~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-network\", rpm:\"libvirt-daemon-config-network~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-nwfilter\", rpm:\"libvirt-daemon-config-nwfilter~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-debuginfo\", rpm:\"libvirt-daemon-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-interface\", rpm:\"libvirt-daemon-driver-interface~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-interface-debuginfo\", rpm:\"libvirt-daemon-driver-interface-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-lxc\", rpm:\"libvirt-daemon-driver-lxc~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-lxc-debuginfo\", rpm:\"libvirt-daemon-driver-lxc-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-network\", rpm:\"libvirt-daemon-driver-network~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-network-debuginfo\", rpm:\"libvirt-daemon-driver-network-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nodedev\", rpm:\"libvirt-daemon-driver-nodedev~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nodedev-debuginfo\", rpm:\"libvirt-daemon-driver-nodedev-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nwfilter\", rpm:\"libvirt-daemon-driver-nwfilter~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nwfilter-debuginfo\", rpm:\"libvirt-daemon-driver-nwfilter-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-qemu\", rpm:\"libvirt-daemon-driver-qemu~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-qemu-debuginfo\", rpm:\"libvirt-daemon-driver-qemu-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-secret\", rpm:\"libvirt-daemon-driver-secret~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-secret-debuginfo\", rpm:\"libvirt-daemon-driver-secret-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage\", rpm:\"libvirt-daemon-driver-storage~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-core\", rpm:\"libvirt-daemon-driver-storage-core~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-core-debuginfo\", rpm:\"libvirt-daemon-driver-storage-core-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-disk\", rpm:\"libvirt-daemon-driver-storage-disk~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-disk-debuginfo\", rpm:\"libvirt-daemon-driver-storage-disk-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-iscsi\", rpm:\"libvirt-daemon-driver-storage-iscsi~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-iscsi-debuginfo\", rpm:\"libvirt-daemon-driver-storage-iscsi-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-logical\", rpm:\"libvirt-daemon-driver-storage-logical~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-logical-debuginfo\", rpm:\"libvirt-daemon-driver-storage-logical-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-mpath\", rpm:\"libvirt-daemon-driver-storage-mpath~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-mpath-debuginfo\", rpm:\"libvirt-daemon-driver-storage-mpath-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-scsi\", rpm:\"libvirt-daemon-driver-storage-scsi~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-scsi-debuginfo\", rpm:\"libvirt-daemon-driver-storage-scsi-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-uml\", rpm:\"libvirt-daemon-driver-uml~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-uml-debuginfo\", rpm:\"libvirt-daemon-driver-uml-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-vbox\", rpm:\"libvirt-daemon-driver-vbox~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-vbox-debuginfo\", rpm:\"libvirt-daemon-driver-vbox-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-hooks\", rpm:\"libvirt-daemon-hooks~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-lxc\", rpm:\"libvirt-daemon-lxc~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-qemu\", rpm:\"libvirt-daemon-qemu~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-uml\", rpm:\"libvirt-daemon-uml~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-vbox\", rpm:\"libvirt-daemon-vbox~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-debugsource\", rpm:\"libvirt-debugsource~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-devel\", rpm:\"libvirt-devel~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-doc\", rpm:\"libvirt-doc~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-libs\", rpm:\"libvirt-libs~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-libs-debuginfo\", rpm:\"libvirt-libs-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-lock-sanlock\", rpm:\"libvirt-lock-sanlock~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-lock-sanlock-debuginfo\", rpm:\"libvirt-lock-sanlock-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-nss\", rpm:\"libvirt-nss~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-nss-debuginfo\", rpm:\"libvirt-nss-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"wireshark-plugin-libvirt\", rpm:\"wireshark-plugin-libvirt~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"wireshark-plugin-libvirt-debuginfo\", rpm:\"wireshark-plugin-libvirt-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client-32bit-debuginfo\", rpm:\"libvirt-client-32bit-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-libxl\", rpm:\"libvirt-daemon-driver-libxl~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-libxl-debuginfo\", rpm:\"libvirt-daemon-driver-libxl-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-rbd\", rpm:\"libvirt-daemon-driver-storage-rbd~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-rbd-debuginfo\", rpm:\"libvirt-daemon-driver-storage-rbd-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-xen\", rpm:\"libvirt-daemon-xen~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-devel-32bit\", rpm:\"libvirt-devel-32bit~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-03-14T17:06:46", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-21T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for qemu (openSUSE-SU-2019:1420-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852508", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852508", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852508\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-21 02:01:13 +0000 (Tue, 21 May 2019)\");\n script_name(\"openSUSE: Security Advisory for qemu (openSUSE-SU-2019:1420-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap42\\.3\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1420-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-05/msg00044.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'qemu'\n package(s) announced via the openSUSE-SU-2019:1420-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for qemu fixes the following issues:\n\n - CVE-2018-12126 CVE-2018-12127 CVE-2018-12130 CVE-2019-11091: Added x86\n cpu feature 'md-clear' (bsc#1111331)\n\n This update was imported from the SUSE:SLE-12-SP3:Update update project.\n\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 42.3:\n\n zypper in -t patch openSUSE-2019-1420=1\");\n\n script_tag(name:\"affected\", value:\"'qemu' package(s) on openSUSE Leap 42.3.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap42.3\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-linux-user\", rpm:\"qemu-linux-user~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-linux-user-debuginfo\", rpm:\"qemu-linux-user-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-linux-user-debugsource\", rpm:\"qemu-linux-user-debugsource~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu\", rpm:\"qemu~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-arm\", rpm:\"qemu-arm~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-arm-debuginfo\", rpm:\"qemu-arm-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-curl\", rpm:\"qemu-block-curl~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-curl-debuginfo\", rpm:\"qemu-block-curl-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-dmg\", rpm:\"qemu-block-dmg~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-dmg-debuginfo\", rpm:\"qemu-block-dmg-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-iscsi\", rpm:\"qemu-block-iscsi~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-iscsi-debuginfo\", rpm:\"qemu-block-iscsi-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-rbd\", rpm:\"qemu-block-rbd~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-rbd-debuginfo\", rpm:\"qemu-block-rbd-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-ssh\", rpm:\"qemu-block-ssh~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-ssh-debuginfo\", rpm:\"qemu-block-ssh-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-debugsource\", rpm:\"qemu-debugsource~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-extra\", rpm:\"qemu-extra~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-extra-debuginfo\", rpm:\"qemu-extra-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-guest-agent\", rpm:\"qemu-guest-agent~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-guest-agent-debuginfo\", rpm:\"qemu-guest-agent-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ksm\", rpm:\"qemu-ksm~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-kvm\", rpm:\"qemu-kvm~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-lang\", rpm:\"qemu-lang~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ppc\", rpm:\"qemu-ppc~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ppc-debuginfo\", rpm:\"qemu-ppc-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-s390\", rpm:\"qemu-s390~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-s390-debuginfo\", rpm:\"qemu-s390-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-testsuite\", rpm:\"qemu-testsuite~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-tools\", rpm:\"qemu-tools~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-tools-debuginfo\", rpm:\"qemu-tools-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-x86\", rpm:\"qemu-x86~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-x86-debuginfo\", rpm:\"qemu-x86-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ipxe\", rpm:\"qemu-ipxe~1.0.0+~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-seabios\", rpm:\"qemu-seabios~1.10.2~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-sgabios\", rpm:\"qemu-sgabios~8~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-vgabios\", rpm:\"qemu-vgabios~1.10.2~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:04", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "CentOS Update for qemu-guest-agent CESA-2019:1181 centos6 ", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310883052", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310883052", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.883052\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:00:54 +0000 (Thu, 16 May 2019)\");\n script_name(\"CentOS Update for qemu-guest-agent CESA-2019:1181 centos6 \");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"CentOS Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/centos\", \"ssh/login/rpms\", re:\"ssh/login/release=CentOS6\");\n\n script_xref(name:\"CESA\", value:\"2019:1181\");\n script_xref(name:\"URL\", value:\"http://lists.centos.org/pipermail/centos-announce/2019-May/023307.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'qemu-guest-agent'\n package(s) announced via the CESA-2019:1181 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Kernel-based Virtual Machine (KVM) is a full virtualization solution for\nLinux on a variety of architectures. The qemu-kvm packages provide the\nuser-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n * A flaw was found in the implementation of the 'fill buffer', a mechanism\nused by modern CPUs when a cache-miss is made on L1 CPU cache. If an\nattacker can generate a load operation that would create a page fault, the\nexecution will continue speculatively with incorrect data from the fill\nbuffer while the data is fetched from higher level caches. This response\ntime can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n * Modern Intel microprocessors implement hardware-level micro-optimizations\nto improve the performance of writing data back to CPU caches. The write\noperation is split into STA (STore Address) and STD (STore Data)\nsub-operations. These sub-operations allow the processor to hand-off\naddress generation logic into these sub-operations for optimized writes.\nBoth of these sub-operations write to a shared distributed processor\nstructure called the 'processor store buffer'. As a result, an unprivileged\nattacker could use this flaw to read private data resident within the CPU's\nprocessor store buffer. (CVE-2018-12126)\n\n * Microprocessors use a load port subcomponent to perform load operations\nfrom memory or IO. During a load operation, the load port receives data\nfrom the memory or IO subsystem and then provides the data to the CPU\nregisters and operations in the CPUs pipelines. Stale load operations\nresults are stored in the 'load port' table until overwritten by newer\noperations. Certain load-port operations triggered by an attacker can be\nused to reveal data about previous stale requests leaking data back to the\nattacker via a timing side-channel. (CVE-2018-12127)\n\n * Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable information\ndisclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS\nscore, acknowledgments, and other related information, refer to the CVE\npage(s) listed in the References section.\");\n\n script_tag(name:\"affected\", value:\"'qemu-guest-agent' package(s) on CentOS 6.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"CentOS6\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-guest-agent\", rpm:\"qemu-guest-agent~0.12.1.2~2.506.el6_10.3\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-img\", rpm:\"qemu-img~0.12.1.2~2.506.el6_10.3\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-kvm\", rpm:\"qemu-kvm~0.12.1.2~2.506.el6_10.3\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-kvm-tools\", rpm:\"qemu-kvm-tools~0.12.1.2~2.506.el6_10.3\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-27T14:43:33", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-06-21T00:00:00", "type": "openvas", "title": "Ubuntu Update for intel-microcode USN-3977-3", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-27T00:00:00", "id": "OPENVAS:1361412562310844061", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310844061", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.844061\");\n script_version(\"2019-06-27T06:30:18+0000\");\n script_cve_id(\"CVE-2018-12130\", \"CVE-2018-12127\", \"CVE-2018-12126\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-27 06:30:18 +0000 (Thu, 27 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-06-21 02:00:50 +0000 (Fri, 21 Jun 2019)\");\n script_name(\"Ubuntu Update for intel-microcode USN-3977-3\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Ubuntu Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/ubuntu_linux\", \"ssh/login/packages\", re:\"ssh/login/release=(UBUNTU18\\.10|UBUNTU19\\.04|UBUNTU18\\.04 LTS|UBUNTU16\\.04 LTS)\");\n\n script_xref(name:\"USN\", value:\"3977-3\");\n script_xref(name:\"URL\", value:\"http://www.ubuntu.com/usn/usn-3977-3/\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'intel-microcode'\n package(s) announced via the USN-3977-3 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"USN-3977-1 and USN-3977-2 provided mitigations for Microarchitectural\nData Sampling (MDS) vulnerabilities in Intel Microcode for a\nlarge number of Intel processor families. This update provides the\ncorresponding updated microcode mitigations for the Intel Sandy Bridge\nprocessor family\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan\nHorea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos,\nCristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss\ndiscovered that memory previously stored in microarchitectural fill buffers\nof an Intel CPU core may be exposed to a malicious process that is\nexecuting on the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan\nvan Schaik, Alyssa Milburn, Sebastian sterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, and Cristiano Giuffrida discovered that memory\npreviously stored in microarchitectural load ports of an Intel CPU core may\nbe exposed to a malicious process that is executing on the same CPU core. A\nlocal attacker could use this to expose sensitive information.\n(CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel\nMoghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel\nGruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory\npreviously stored in microarchitectural store buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same CPU\ncore. A local attacker could use this to expose sensitive information.\n(CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and\nCristiano Giuffrida discovered that uncacheable memory previously stored in\nmicroarchitectural buffers of an Intel CPU core may be exposed to a\nmalicious process that is executing on the same CPU core. A local attacker\ncould use this to expose sensitive information. (CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'intel-microcode' package(s) on Ubuntu 19.04, Ubuntu 18.10, Ubuntu 18.04 LTS, Ubuntu 16.04 LTS.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nrelease = dpkg_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"UBUNTU18.10\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190618.0ubuntu0.18.10.1\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU19.04\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190618.0ubuntu0.19.04.1\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU18.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190618.0ubuntu0.18.04.1\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU16.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190618.0ubuntu0.16.04.1\", rls:\"UBUNTU16.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:40:52", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "openvas", "title": "Fedora Update for qemu FEDORA-2019-f910d35647", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310876375", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310876375", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.876375\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-17 02:12:27 +0000 (Fri, 17 May 2019)\");\n script_name(\"Fedora Update for qemu FEDORA-2019-f910d35647\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Fedora Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/fedora\", \"ssh/login/rpms\", re:\"ssh/login/release=FC30\");\n\n script_xref(name:\"FEDORA\", value:\"2019-f910d35647\");\n script_xref(name:\"URL\", value:\"https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/Y5FN3EW4TD5ZVVHRJTLXZKQIV75IVGZ5\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'qemu'\n package(s) announced via the FEDORA-2019-f910d35647 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"QEMU is a generic and open source processor emulator which achieves a good\nemulation speed by using dynamic translation. QEMU has two operating modes:\n\n * Full system emulation. In this mode, QEMU emulates a full system (for\n example a PC), including a processor and various peripherals. It can be\n used to launch different Operating Systems without rebooting the PC or\n to debug system code.\n\n * User mode emulation. In this mode, QEMU can launch Linux processes compiled\n for one CPU on another CPU.\n\nAs QEMU requires no host kernel patches to run, it is safe and easy to use.\");\n\n script_tag(name:\"affected\", value:\"'qemu' package(s) on Fedora 30.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"FC30\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu\", rpm:\"qemu~3.1.0~8.fc30\", rls:\"FC30\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:09", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "Debian Security Advisory DSA 4447-1 (intel-microcode - security update)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310704447", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310704447", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.704447\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:00:06 +0000 (Thu, 16 May 2019)\");\n script_name(\"Debian Security Advisory DSA 4447-1 (intel-microcode - security update)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Debian Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/debian_linux\", \"ssh/login/packages\", re:\"ssh/login/release=DEB9\");\n\n script_xref(name:\"URL\", value:\"https://www.debian.org/security/2019/dsa-4447.html\");\n script_xref(name:\"URL\", value:\"https://security-tracker.debian.org/tracker/DSA-4447-1\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'intel-microcode'\n package(s) announced via the DSA-4447-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update ships updated CPU microcode for most types of Intel CPUs. It\nprovides mitigations for the MSBDS, MFBDS, MLPDS and MDSUM hardware\nvulnerabilities.\n\nTo fully resolve these vulnerabilities it is also necessary to update\nthe Linux kernel packages as released in DSA 4444.\");\n\n script_tag(name:\"affected\", value:\"'intel-microcode' package(s) on Debian Linux.\");\n\n script_tag(name:\"solution\", value:\"For the stable distribution (stretch), these problems have been fixed in\nversion 3.20190514.1~deb9u1.\n\nWe recommend that you upgrade your intel-microcode packages.\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nres = \"\";\nreport = \"\";\nif(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.1~deb9u1\", rls:\"DEB9\"))) {\n report += res;\n}\n\nif(report != \"\") {\n security_message(data:report);\n} else if(__pkg_match) {\n exit(99);\n}\n\nexit(0);", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-31T16:47:37", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-07-25T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1805-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852638", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852638", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852638\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-07-25 02:01:52 +0000 (Thu, 25 Jul 2019)\");\n script_name(\"openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1805-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap15\\.0\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1805-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-07/msg00053.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'ucode-intel'\n package(s) announced via the openSUSE-SU-2019:1805-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for ucode-intel fixes the following issues:\n\n This update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the CPU Microcode adjustments for the software\n mitigations.\n\n Release notes:\n\n - --- updated platforms ------------------------------------ SNB-E/EN/EP\n C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X SNB-E/EN/EP\n C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\n This update was imported from the SUSE:SLE-15:Update update project.\n\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1805=1\");\n\n script_tag(name:\"affected\", value:\"'ucode-intel' package(s) on openSUSE Leap 15.0.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap15.0\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel\", rpm:\"ucode-intel~20190618~lp150.2.24.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-31T16:29:16", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2020-01-09T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1806-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852940", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852940", "sourceData": "# Copyright (C) 2020 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852940\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2020-01-09 09:46:46 +0000 (Thu, 09 Jan 2020)\");\n script_name(\"openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1806-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2020 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap15\\.1\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1806-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-07/msg00052.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'ucode-intel'\n package(s) announced via the openSUSE-SU-2019:1806-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for ucode-intel fixes the following issues:\n\n This update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the CPU Microcode adjustments for the software\n mitigations.\n\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.1:\n\n zypper in -t patch openSUSE-2019-1806=1\");\n\n script_tag(name:\"affected\", value:\"'ucode-intel' package(s) on openSUSE Leap 15.1.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap15.1\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel\", rpm:\"ucode-intel~20190618~lp151.2.3.1\", rls:\"openSUSELeap15.1\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:02", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "Ubuntu Update for libvirt USN-3985-1", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310844013", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310844013", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.844013\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12130\", \"CVE-2018-12127\", \"CVE-2018-12126\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:01:19 +0000 (Thu, 16 May 2019)\");\n script_name(\"Ubuntu Update for libvirt USN-3985-1\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Ubuntu Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/ubuntu_linux\", \"ssh/login/packages\", re:\"ssh/login/release=(UBUNTU18\\.10|UBUNTU19\\.04|UBUNTU18\\.04 LTS|UBUNTU16\\.04 LTS)\");\n\n script_xref(name:\"USN\", value:\"3985-1\");\n script_xref(name:\"URL\", value:\"http://www.ubuntu.com/usn/usn-3985-1/\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'libvirt'\n package(s) announced via the USN-3985-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan\nHorea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos,\nCristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss\ndiscovered that memory previously stored in microarchitectural fill buffers\nof an Intel CPU core may be exposed to a malicious process that is\nexecuting on the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan\nvan Schaik, Alyssa Milburn, Sebastian sterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, and Cristiano Giuffrida discovered that memory\npreviously stored in microarchitectural load ports of an Intel CPU core may\nbe exposed to a malicious process that is executing on the same CPU core. A\nlocal attacker could use this to expose sensitive information.\n(CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel\nMoghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel\nGruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory\npreviously stored in microarchitectural store buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same CPU\ncore. A local attacker could use this to expose sensitive information.\n(CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and\nCristiano Giuffrida discovered that uncacheable memory previously stored in\nmicroarchitectural buffers of an Intel CPU core may be exposed to a\nmalicious process that is executing on the same CPU core. A local attacker\ncould use this to expose sensitive information. (CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on Ubuntu 19.04, Ubuntu 18.10, Ubuntu 18.04 LTS, Ubuntu 16.04 LTS.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nrelease = dpkg_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"UBUNTU18.10\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-clients\", ver:\"4.6.0-2ubuntu3.5\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-daemon\", ver:\"4.6.0-2ubuntu3.5\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt0\", ver:\"4.6.0-2ubuntu3.5\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU19.04\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-clients\", ver:\"5.0.0-1ubuntu2.1\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-daemon\", ver:\"5.0.0-1ubuntu2.1\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt0\", ver:\"5.0.0-1ubuntu2.1\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU18.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-clients\", ver:\"4.0.0-1ubuntu8.10\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-daemon\", ver:\"4.0.0-1ubuntu8.10\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt0\", ver:\"4.0.0-1ubuntu8.10\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU16.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-bin\", ver:\"1.3.1-1ubuntu10.26\", rls:\"UBUNTU16.04 LTS\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt0\", ver:\"1.3.1-1ubuntu10.26\", rls:\"UBUNTU16.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:40:52", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "openvas", "title": "Fedora Update for libvirt FEDORA-2019-f910d35647", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310876368", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310876368", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.876368\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-17 02:12:12 +0000 (Fri, 17 May 2019)\");\n script_name(\"Fedora Update for libvirt FEDORA-2019-f910d35647\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Fedora Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/fedora\", \"ssh/login/rpms\", re:\"ssh/login/release=FC30\");\n\n script_xref(name:\"FEDORA\", value:\"2019-f910d35647\");\n script_xref(name:\"URL\", value:\"https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/JA5T2KLIYRYX4XMARLFBPB45B2INDALL\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'libvirt'\n package(s) announced via the FEDORA-2019-f910d35647 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Libvirt is a C toolkit to interact with the virtualization capabilities\nof recent versions of Linux (and other OSes). The main package includes\nthe libvirtd server exporting the virtualization support.\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on Fedora 30.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"FC30\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt\", rpm:\"libvirt~5.1.0~5.fc30\", rls:\"FC30\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-07-05T18:45:22", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-07-02T00:00:00", "type": "openvas", "title": "Fedora Update for xen FEDORA-2019-aeda234b68", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-07-04T00:00:00", "id": "OPENVAS:1361412562310876550", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310876550", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.876550\");\n script_version(\"2019-07-04T09:58:18+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-07-04 09:58:18 +0000 (Thu, 04 Jul 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-07-02 02:14:12 +0000 (Tue, 02 Jul 2019)\");\n script_name(\"Fedora Update for xen FEDORA-2019-aeda234b68\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Fedora Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/fedora\", \"ssh/login/rpms\", re:\"ssh/login/release=FC30\");\n\n script_xref(name:\"FEDORA\", value:\"2019-aeda234b68\");\n script_xref(name:\"URL\", value:\"https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/POJUMDAYVYNIEBIUI7KEK5PZGXRPMER4\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'xen'\n package(s) announced via the FEDORA-2019-aeda234b68 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This package contains the XenD daemon and xm command line\ntools, needed to manage virtual machines running under the\nXen hypervisor\");\n\n script_tag(name:\"affected\", value:\"'xen' package(s) on Fedora 30.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"FC30\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"xen\", rpm:\"xen~4.11.1~6.fc30\", rls:\"FC30\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:04", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "CentOS Update for libvirt CESA-2019:1180 centos6 ", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310883053", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310883053", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.883053\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:00:57 +0000 (Thu, 16 May 2019)\");\n script_name(\"CentOS Update for libvirt CESA-2019:1180 centos6 \");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"CentOS Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/centos\", \"ssh/login/rpms\", re:\"ssh/login/release=CentOS6\");\n\n script_xref(name:\"CESA\", value:\"2019:1180\");\n script_xref(name:\"URL\", value:\"http://lists.centos.org/pipermail/centos-announce/2019-May/023308.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'libvirt'\n package(s) announced via the CESA-2019:1180 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"The libvirt library contains a C API for managing and interacting with the\nvirtualization capabilities of Linux and other operating systems. In\naddition, libvirt provides tools for remote management of virtualized\nsystems.\n\nSecurity Fix(es):\n\n * A flaw was found in the implementation of the 'fill buffer', a mechanism\nused by modern CPUs when a cache-miss is made on L1 CPU cache. If an\nattacker can generate a load operation that would create a page fault, the\nexecution will continue speculatively with incorrect data from the fill\nbuffer while the data is fetched from higher level caches. This response\ntime can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n * Modern Intel microprocessors implement hardware-level micro-optimizations\nto improve the performance of writing data back to CPU caches. The write\noperation is split into STA (STore Address) and STD (STore Data)\nsub-operations. These sub-operations allow the processor to hand-off\naddress generation logic into these sub-operations for optimized writes.\nBoth of these sub-operations write to a shared distributed processor\nstructure called the 'processor store buffer'. As a result, an unprivileged\nattacker could use this flaw to read private data resident within the CPU's\nprocessor store buffer. (CVE-2018-12126)\n\n * Microprocessors use a load port subcomponent to perform load operations\nfrom memory or IO. During a load operation, the load port receives data\nfrom the memory or IO subsystem and then provides the data to the CPU\nregisters and operations in the CPUs pipelines. Stale load operations\nresults are stored in the 'load port' table until overwritten by newer\noperations. Certain load-port operations triggered by an attacker can be\nused to reveal data about previous stale requests leaking data back to the\nattacker via a timing side-channel. (CVE-2018-12127)\n\n * Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable information\ndisclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS\nscore, acknowledgments, and other related information, refer to the CVE\npage(s) listed in the References section.\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on CentOS 6.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"CentOS6\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt\", rpm:\"libvirt~0.10.2~64.el6_10.1\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client\", rpm:\"libvirt-client~0.10.2~64.el6_10.1\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-devel\", rpm:\"libvirt-devel~0.10.2~64.el6_10.1\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-python\", rpm:\"libvirt-python~0.10.2~64.el6_10.1\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-lock-sanlock\", rpm:\"libvirt-lock-sanlock~0.10.2~64.el6_10.1\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}], "redhat": [{"lastseen": "2021-10-19T20:40:03", "description": "KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm-rhev packages provide the user-space component for running virtual machines that use KVM in environments managed by Red Hat products.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:23:37", "type": "redhat", "title": "(RHSA-2019:1179) Important: qemu-kvm-rhev security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:23:10", "id": "RHSA-2019:1179", "href": "https://access.redhat.com/errata/RHSA-2019:1179", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:38:24", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:23:25", "type": "redhat", "title": "(RHSA-2019:1177) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:23:11", "id": "RHSA-2019:1177", "href": "https://access.redhat.com/errata/RHSA-2019:1177", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:29", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:24:28", "type": "redhat", "title": "(RHSA-2019:1180) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:08:16", "id": "RHSA-2019:1180", "href": "https://access.redhat.com/errata/RHSA-2019:1180", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:58", "description": "Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:23:31", "type": "redhat", "title": "(RHSA-2019:1178) Important: qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:23:09", "id": "RHSA-2019:1178", "href": "https://access.redhat.com/errata/RHSA-2019:1178", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:39:12", "description": "The rhvm-setup-plugins package adds functionality exclusive only to Red Hat Virtualization Manager, and is not available for the upstream ovirt-engine. It includes the configuration of the Red Hat Support plugin, copying downstream-only artifacts to the ISO domain, and links to the knowledgebase and other support material.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:38:09", "type": "redhat", "title": "(RHSA-2019:1205) Important: rhvm-setup-plugins security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T21:02:58", "id": "RHSA-2019:1205", "href": "https://access.redhat.com/errata/RHSA-2019:1205", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:35:36", "description": "The kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T17:23:44", "type": "redhat", "title": "(RHSA-2019:1168) Important: kernel security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:23:09", "id": "RHSA-2019:1168", "href": "https://access.redhat.com/errata/RHSA-2019:1168", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:39:42", "description": "KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm-rhev packages provide the user-space component for running virtual machines that use KVM in environments managed by Red Hat products.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:39:14", "type": "redhat", "title": "(RHSA-2019:1202) Important: qemu-kvm-rhev security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:42:23", "id": "RHSA-2019:1202", "href": "https://access.redhat.com/errata/RHSA-2019:1202", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:36:05", "description": "KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm-rhev packages provide the user-space component for running virtual machines that use KVM in environments managed by Red Hat products.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:39:21", "type": "redhat", "title": "(RHSA-2019:1199) Important: qemu-kvm-rhev security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:42:24", "id": "RHSA-2019:1199", "href": "https://access.redhat.com/errata/RHSA-2019:1199", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:37", "description": "Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T19:37:13", "type": "redhat", "title": "(RHSA-2019:1195) Important: qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T19:44:56", "id": "RHSA-2019:1195", "href": "https://access.redhat.com/errata/RHSA-2019:1195", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:38:58", "description": "The redhat-virtualization-host packages provide the Red Hat Virtualization Host. These packages include redhat-release-virtualization-host, ovirt-node, and rhev-hypervisor. Red Hat Virtualization Hosts (RHVH) are installed using a special build of Red Hat Enterprise Linux with only the packages required to host virtual machines. RHVH features a Cockpit user interface for monitoring the host's resources and performing administrative tasks. \n\nThe ovirt-node-ng packages provide the Red Hat Virtualization Host. These packages include redhat-release-virtualization-host, ovirt-node, and rhev-hypervisor. Red Hat Virtualization Hosts (RHVH) are installed using a special build of Red Hat Enterprise Linux with only the packages required to host virtual machines. RHVH features a Cockpit user interface for monitoring the host's resources and performing administrative tasks.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:38:39", "type": "redhat", "title": "(RHSA-2019:1209) Important: redhat-virtualization-host security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T21:03:02", "id": "RHSA-2019:1209", "href": "https://access.redhat.com/errata/RHSA-2019:1209", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:39:04", "description": "KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm-rhev packages provide the user-space component for running virtual machines that use KVM in environments managed by Red Hat products.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:39:17", "type": "redhat", "title": "(RHSA-2019:1200) Important: qemu-kvm-rhev security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:42:23", "id": "RHSA-2019:1200", "href": "https://access.redhat.com/errata/RHSA-2019:1200", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:36:32", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T18:09:20", "type": "redhat", "title": "(RHSA-2019:1184) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:49:10", "id": "RHSA-2019:1184", "href": "https://access.redhat.com/errata/RHSA-2019:1184", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:36:34", "description": "The RHV-M Virtual Appliance automates the process of installing and configuring the Red Hat Virtualization Manager. The appliance is available to download as an OVA file from the Customer Portal.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:38:48", "type": "redhat", "title": "(RHSA-2019:1208) Important: rhvm-appliance security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T21:03:01", "id": "RHSA-2019:1208", "href": "https://access.redhat.com/errata/RHSA-2019:1208", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:49", "description": "Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T19:37:20", "type": "redhat", "title": "(RHSA-2019:1198) Important: qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T19:44:59", "id": "RHSA-2019:1198", "href": "https://access.redhat.com/errata/RHSA-2019:1198", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:39", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:13:13", "type": "redhat", "title": "(RHSA-2019:1197) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:32:15", "id": "RHSA-2019:1197", "href": "https://access.redhat.com/errata/RHSA-2019:1197", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:39:37", "description": "Kernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T18:09:34", "type": "redhat", "title": "(RHSA-2019:1185) Important: qemu-kvm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:49:04", "id": "RHSA-2019:1185", "href": "https://access.redhat.com/errata/RHSA-2019:1185", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:39:03", "description": "KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm-rhev packages provide the user-space component for running virtual machines that use KVM in environments managed by Red Hat products.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:39:25", "type": "redhat", "title": "(RHSA-2019:1201) Important: qemu-kvm-rhev security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:42:24", "id": "RHSA-2019:1201", "href": "https://access.redhat.com/errata/RHSA-2019:1201", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:38:52", "description": "The VDSM service is required by a Virtualization Manager to manage the Linux hosts. VDSM manages and monitors the host's storage, memory and networks as well as virtual machine creation, other host administration tasks, statistics gathering, and log collection.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:37:52", "type": "redhat", "title": "(RHSA-2019:1203) Important: vdsm security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T21:02:56", "id": "RHSA-2019:1203", "href": "https://access.redhat.com/errata/RHSA-2019:1203", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:39", "description": "The rhvm-setup-plugins package adds functionality exclusive only to Red Hat Virtualization Manager, and is not available for the upstream ovirt-engine. It includes the configuration of the Red Hat Support plugin, copying downstream-only artifacts to the ISO domain, and links to the knowledgebase and other support material.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:38:15", "type": "redhat", "title": "(RHSA-2019:1206) Important: rhvm-setup-plugins security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T21:02:59", "id": "RHSA-2019:1206", "href": "https://access.redhat.com/errata/RHSA-2019:1206", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:36:36", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:17:03", "type": "redhat", "title": "(RHSA-2019:1194) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:20:48", "id": "RHSA-2019:1194", "href": "https://access.redhat.com/errata/RHSA-2019:1194", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:37", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T18:08:34", "type": "redhat", "title": "(RHSA-2019:1182) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T18:50:07", "id": "RHSA-2019:1182", "href": "https://access.redhat.com/errata/RHSA-2019:1182", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-10-19T20:37:04", "description": "The libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es):\n\n* A flaw was found in the implementation of the \"fill buffer\", a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a \u2018load port\u2019 subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU\u2019s pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-14T20:13:20", "type": "redhat", "title": "(RHSA-2019:1186) Important: libvirt security update", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-14T20:32:17", "id": "RHSA-2019:1186", "href": "https://access.redhat.com/errata/RHSA-2019:1186", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}], "fedora": [{"lastseen": "2021-07-28T14:46:51", "description": "This package contains the XenD daemon and xm command line tools, needed to manage virtual machines running under the Xen hypervisor ", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-07-01T01:09:24", "type": "fedora", "title": "[SECURITY] Fedora 30 Update: xen-4.11.1-6.fc30", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-07-01T01:09:24", "id": "FEDORA:609B763560C6", "href": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/thread/POJUMDAYVYNIEBIUI7KEK5PZGXRPMER4/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-07-28T14:46:51", "description": "QEMU is a generic and open source processor emulator which achieves a good emulation speed by using dynamic translation. QEMU has two operating modes: * Full system emulation. In this mode, QEMU emulates a full system (for example a PC), including a processor and various peripherials. It can be used to launch different Operating Systems without rebooting the PC or to debug system code. * User mode emulation. In this mode, QEMU can launch Linux processes compi led for one CPU on another CPU. As QEMU requires no host kernel patches to run, it is safe and easy to use. ", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-17T01:08:38", "type": "fedora", "title": "[SECURITY] Fedora 30 Update: qemu-3.1.0-8.fc30", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-17T01:08:38", "id": "FEDORA:CFE4360D22F6", "href": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/thread/Y5FN3EW4TD5ZVVHRJTLXZKQIV75IVGZ5/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}], "nessus": [{"lastseen": "2022-02-28T13:13:58", "description": "An update for libvirt is now available for Red Hat Enterprise Linux 7.4 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : libvirt (RHSA-2019:1184) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:libvirt", "p-cpe:/a:redhat:enterprise_linux:libvirt-admin", "p-cpe:/a:redhat:enterprise_linux:libvirt-client", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-network", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-interface", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-network", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-secret", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-core", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-disk", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-gluster", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-logical", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-kvm", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-lxc", "p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo", "p-cpe:/a:redhat:enterprise_linux:libvirt-devel", "p-cpe:/a:redhat:enterprise_linux:libvirt-docs", "p-cpe:/a:redhat:enterprise_linux:libvirt-libs", "p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock", "p-cpe:/a:redhat:enterprise_linux:libvirt-login-shell", "p-cpe:/a:redhat:enterprise_linux:libvirt-nss", "cpe:/o:redhat:enterprise_linux:7.4"], "id": "REDHAT-RHSA-2019-1184.NASL", "href": "https://www.tenable.com/plugins/nessus/125050", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1184. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125050);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1184\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : libvirt (RHSA-2019:1184) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for libvirt is now available for Red Hat Enterprise Linux\n7.4 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1184\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-gluster\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-docs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-login-shell\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.4\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.4([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.4\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1184\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-admin-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-admin-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", reference:\"libvirt-client-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-config-network-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-network-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-config-nwfilter-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-nwfilter-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-interface-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-lxc-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-network-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-nodedev-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-nwfilter-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-secret-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-core-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-disk-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-gluster-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-iscsi-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-logical-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-mpath-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-scsi-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-kvm-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-lxc-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-lxc-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", reference:\"libvirt-debuginfo-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", reference:\"libvirt-devel-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-docs-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-docs-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", reference:\"libvirt-libs-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-login-shell-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-login-shell-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", reference:\"libvirt-nss-3.2.0-14.el7_4.13\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-admin / libvirt-client / libvirt-daemon / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:27", "description": "An update for kernel-rt is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel-rt packages provide the Real Time Linux Kernel, which enables fine-tuning for systems with extremely high determinism requirements.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : kernel-rt (RHSA-2019:1176) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:kernel-rt", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-trace", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-trace-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-trace-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-trace-kvm", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-trace-kvm-debuginfo", "cpe:/o:redhat:enterprise_linux:7"], "id": "REDHAT-RHSA-2019-1176.NASL", "href": "https://www.tenable.com/plugins/nessus/125042", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1176. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125042);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1176\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : kernel-rt (RHSA-2019:1176) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel-rt is now available for Red Hat Enterprise Linux\n7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel-rt packages provide the Real Time Linux Kernel, which\nenables fine-tuning for systems with extremely high determinism\nrequirements.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1176\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-trace\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-trace-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-trace-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-trace-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-trace-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1176\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1176\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-debug-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-debug-debuginfo-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-debug-devel-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-debug-kvm-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-debug-kvm-debuginfo-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-debuginfo-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-debuginfo-common-x86_64-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-devel-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"kernel-rt-doc-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-kvm-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-kvm-debuginfo-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-trace-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-trace-debuginfo-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-trace-devel-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-trace-kvm-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"kernel-rt-trace-kvm-debuginfo-3.10.0-957.12.2.rt56.929.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel-rt / kernel-rt-debug / kernel-rt-debug-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-06-16T16:52:54", "description": "The remote NewStart CGSL host, running version MAIN 4.05, has qemu-kvm packages installed that are affected by multiple vulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub- operations. These sub-operations allow the processor to hand-off address generation logic into these sub- operations for optimized writes. Both of these sub- operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill buffer, a mechanism used by modern CPUs when a cache- miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side- channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-08-12T00:00:00", "type": "nessus", "title": "NewStart CGSL MAIN 4.05 : qemu-kvm Multiple Vulnerabilities (NS-SA-2019-0154)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-14T00:00:00", "cpe": [], "id": "NEWSTART_CGSL_NS-SA-2019-0154_QEMU-KVM.NASL", "href": "https://www.tenable.com/plugins/nessus/127430", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\n# The descriptive text and package checks in this plugin were\n# extracted from ZTE advisory NS-SA-2019-0154. The text\n# itself is copyright (C) ZTE, Inc.\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(127430);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/14\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n\n script_name(english:\"NewStart CGSL MAIN 4.05 : qemu-kvm Multiple Vulnerabilities (NS-SA-2019-0154)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote machine is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote NewStart CGSL host, running version MAIN 4.05, has qemu-kvm packages installed that are affected by multiple\nvulnerabilities:\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data) sub-\n operations. These sub-operations allow the processor to\n hand-off address generation logic into these sub-\n operations for optimized writes. Both of these sub-\n operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - A flaw was found in the implementation of the fill\n buffer, a mechanism used by modern CPUs when a cache-\n miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\n\n - Microprocessors use a load port subcomponent to\n perform load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing side-\n channel. (CVE-2018-12127)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"http://security.gd-linux.com/notice/NS-SA-2019-0154\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the vulnerable CGSL qemu-kvm packages. Note that updated packages may not be available yet. Please contact ZTE\nfor more information.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/07/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"NewStart CGSL Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/ZTE-CGSL/release\", \"Host/ZTE-CGSL/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/ZTE-CGSL/release\");\nif (isnull(release) || release !~ \"^CGSL (MAIN|CORE)\") audit(AUDIT_OS_NOT, \"NewStart Carrier Grade Server Linux\");\n\nif (release !~ \"CGSL MAIN 4.05\")\n audit(AUDIT_OS_NOT, 'NewStart CGSL MAIN 4.05');\n\nif (!get_kb_item(\"Host/ZTE-CGSL/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"NewStart Carrier Grade Server Linux\", cpu);\n\nflag = 0;\n\npkgs = {\n \"CGSL MAIN 4.05\": [\n \"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\",\n \"qemu-img-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-debuginfo-0.12.1.2-2.506.el6_10.3\",\n \"qemu-kvm-tools-0.12.1.2-2.506.el6_10.3\"\n ]\n};\npkg_list = pkgs[release];\n\nforeach (pkg in pkg_list)\n if (rpm_check(release:\"ZTE \" + release, reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-kvm\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-09-21T16:29:12", "description": "The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in the SUSE-SU-2019:14048-1 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2021-06-10T00:00:00", "type": "nessus", "title": "SUSE SLES11 Security Update : microcode_ctl (SUSE-SU-2019:14048-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-06-10T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:microcode_ctl", "cpe:/o:novell:suse_linux:11"], "id": "SUSE_SU-2019-14048-1.NASL", "href": "https://www.tenable.com/plugins/nessus/150546", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The package checks in this plugin were extracted from\n# SUSE update advisory SUSE-SU-2019:14048-1. The text itself\n# is copyright (C) SUSE.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(150546);\n script_version(\"1.2\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/06/10\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"SuSE\", value:\"SUSE-SU-2019:14048-1\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"SUSE SLES11 Security Update : microcode_ctl (SUSE-SU-2019:14048-1)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in\nthe SUSE-SU-2019:14048-1 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1111331\");\n # https://lists.suse.com/pipermail/sle-security-updates/2019-May/005455.html\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?ddc44404\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12126\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12127\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2018-12130\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2019-11091\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected microcode_ctl package.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2021/06/10\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:microcode_ctl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:11\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('misc_func.inc');\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'SUSE');\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLES11)$\", string:os_ver)) audit(AUDIT_OS_NOT, 'SUSE SLES11', 'SUSE ' + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'SUSE ' + os_ver, cpu);\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES11\" && (! preg(pattern:\"^(4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES11 SP4\", os_ver + \" SP\" + sp);\n\npkgs = [\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'i586', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'i586', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},\n {'reference':'microcode_ctl-1.17-102.83.36', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'}\n];\n\nflag = 0;\nforeach package_array ( pkgs ) {\n reference = NULL;\n release = NULL;\n sp = NULL;\n cpu = NULL;\n exists_check = NULL;\n rpm_spec_vers_cmp = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (reference && release && exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n else if (reference && release) {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n}\n\nif (flag)\n{\n ltss_plugin_caveat = '\\n' +\n 'NOTE: This vulnerability check contains fixes that apply to\\n' +\n 'packages only available in SUSE Enterprise Linux Server LTSS\\n' +\n 'repositories. Access to these package security updates require\\n' +\n 'a paid SUSE LTSS subscription.\\n';\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + ltss_plugin_caveat\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'microcode_ctl');\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:35", "description": "Define md-clear CPUID bit.\n\nAssuming an updated host kernel and microcode, the md-clear bit will be automatically exposed to guests using the QEMU '-cpu host' arg, or libvirt 'host-model' or 'host-passthrough' configurations.\n\nGuests using a named CPU model it must be manually updated to add this extra CPU feature.\n\nResolves CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091\n\nNote that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website.\nTenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-21T00:00:00", "type": "nessus", "title": "Fedora 28 : 2:qemu / libvirt (2019-6e146a714c) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:fedoraproject:fedora:2:qemu", "p-cpe:/a:fedoraproject:fedora:libvirt", "cpe:/o:fedoraproject:fedora:28"], "id": "FEDORA_2019-6E146A714C.NASL", "href": "https://www.tenable.com/plugins/nessus/125299", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Fedora Security Advisory FEDORA-2019-6e146a714c.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125299);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"FEDORA\", value:\"2019-6e146a714c\");\n\n script_name(english:\"Fedora 28 : 2:qemu / libvirt (2019-6e146a714c) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Fedora host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Define md-clear CPUID bit.\n\nAssuming an updated host kernel and microcode, the md-clear bit will\nbe automatically exposed to guests using the QEMU '-cpu host' arg, or\nlibvirt 'host-model' or 'host-passthrough' configurations.\n\nGuests using a named CPU model it must be manually updated to add this\nextra CPU feature.\n\nResolves CVE-2018-12126, CVE-2018-12127, CVE-2018-12130,\nCVE-2019-11091\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the Fedora update system website.\nTenable has attempted to automatically clean and format it as much as\npossible without introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bodhi.fedoraproject.org/updates/FEDORA-2019-6e146a714c\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected 2:qemu and / or libvirt packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fedoraproject:fedora:2:qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fedoraproject:fedora:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:fedoraproject:fedora:28\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/21\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/21\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Fedora Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Fedora\" >!< release) audit(AUDIT_OS_NOT, \"Fedora\");\nos_ver = pregmatch(pattern: \"Fedora.*release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Fedora\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^28([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Fedora 28\", \"Fedora \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Fedora\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"FC28\", reference:\"qemu-2.11.2-5.fc28\", epoch:\"2\")) flag++;\nif (rpm_check(release:\"FC28\", reference:\"libvirt-4.1.0-6.fc28\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"2:qemu / libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-06-16T16:52:12", "description": "Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer.(CVE-2018-12126)\n\nUncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.(CVE-2019-11091)\n\nMicroprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel.(CVE-2018-12127)\n\nA flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.(CVE-2018-12130)", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-08-13T00:00:00", "type": "nessus", "title": "Amazon Linux AMI : qemu-kvm (ALAS-2019-1260) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-02T00:00:00", "cpe": ["p-cpe:/a:amazon:linux:qemu-img", "p-cpe:/a:amazon:linux:qemu-kvm", "p-cpe:/a:amazon:linux:qemu-kvm-common", "p-cpe:/a:amazon:linux:qemu-kvm-debuginfo", "p-cpe:/a:amazon:linux:qemu-kvm-tools", "cpe:/o:amazon:linux"], "id": "ALA_ALAS-2019-1260.NASL", "href": "https://www.tenable.com/plugins/nessus/127816", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Amazon Linux AMI Security Advisory ALAS-2019-1260.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(127816);\n script_version(\"1.2\");\n script_cvs_date(\"Date: 2020/01/02\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"ALAS\", value:\"2019-1260\");\n\n script_name(english:\"Amazon Linux AMI : qemu-kvm (ALAS-2019-1260) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Amazon Linux AMI host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer.(CVE-2018-12126)\n\nUncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local\naccess.(CVE-2019-11091)\n\nMicroprocessors use a load port subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPUs pipelines. Stale\nload operations results are stored in the 'load port' table until\noverwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel.(CVE-2018-12127)\n\nA flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer.(CVE-2018-12130)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://alas.aws.amazon.com/ALAS-2019-1260.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Run 'yum update qemu-kvm' to update your system.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:amazon:linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/08/12\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/08/13\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Amazon Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AmazonLinux/release\", \"Host/AmazonLinux/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/AmazonLinux/release\");\nif (isnull(release) || !strlen(release)) audit(AUDIT_OS_NOT, \"Amazon Linux\");\nos_ver = pregmatch(pattern: \"^AL(A|\\d)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Amazon Linux\");\nos_ver = os_ver[1];\nif (os_ver != \"A\")\n{\n if (os_ver == 'A') os_ver = 'AMI';\n audit(AUDIT_OS_NOT, \"Amazon Linux AMI\", \"Amazon Linux \" + os_ver);\n}\n\nif (!get_kb_item(\"Host/AmazonLinux/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\nflag = 0;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-156.16.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-156.16.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-156.16.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-156.16.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-156.16.amzn1\")) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:53", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 6.5 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 6 : qemu-kvm (RHSA-2019:1198) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-guest-agent", "p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:6.5"], "id": "REDHAT-RHSA-2019-1198.NASL", "href": "https://www.tenable.com/plugins/nessus/125128", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1198. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125128);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1198\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : qemu-kvm (RHSA-2019:1198) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n6.5 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1198\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:6.5\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6\\.5([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 6.5\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1198\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL6\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-guest-agent-0.12.1.2-2.415.el6_5.20\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-img-0.12.1.2-2.415.el6_5.20\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-0.12.1.2-2.415.el6_5.20\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-0.12.1.2-2.415.el6_5.20\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-0.12.1.2-2.415.el6_5.20\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-guest-agent / qemu-img / qemu-kvm / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "- Microarchitectural Store Buffer Data Sampling (MSBDS) (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS) (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS) (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM) (CVE-2019-11091)\n\nMSBDS leaks Store Buffer Entries which can be speculatively forwarded to a dependent load (store-to-load forwarding) as an optimization. The forward can also happen to a faulting or assisting load operation for a different memory address, which can cause an issue under certain conditions. Store buffers are partitioned between Hyper-Threads so cross thread forwarding is not possible. But if a thread enters or exits a sleep state the store buffer is repartitioned which can expose data from one thread to the other.\n\nMFBDS leaks Fill Buffer Entries. Fill buffers are used internally to manage L1 miss situations and to hold data which is returned or sent in response to a memory or I/O operation. Fill buffers can forward data to a load operation and also write data to the cache. When the fill buffer is deallocated it can retain the stale data of the preceding operations which can then be forwarded to a faulting or assisting load operation, which can cause an issue under certain conditions. Fill buffers are shared between Hyper-Threads so cross thread leakage is possible.\n\nMLDPS leaks Load Port Data. Load ports are used to perform load operations from memory or I/O. The received data is then forwarded to the register file or a subsequent operation. In some implementations the Load Port can contain stale data from a previous operation which can be forwarded to faulting or assisting loads under certain conditions, which again can cause an issue eventually. Load ports are shared between Hyper-Threads so cross thread leakage is possible.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Amazon Linux AMI : kernel (ALAS-2019-1205) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:amazon:linux:kernel", "p-cpe:/a:amazon:linux:kernel-debuginfo", "p-cpe:/a:amazon:linux:kernel-debuginfo-common-i686", "p-cpe:/a:amazon:linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:amazon:linux:kernel-devel", "p-cpe:/a:amazon:linux:kernel-headers", "p-cpe:/a:amazon:linux:kernel-tools", "p-cpe:/a:amazon:linux:kernel-tools-debuginfo", "p-cpe:/a:amazon:linux:kernel-tools-devel", "p-cpe:/a:amazon:linux:perf", "p-cpe:/a:amazon:linux:perf-debuginfo", "cpe:/o:amazon:linux"], "id": "ALA_ALAS-2019-1205.NASL", "href": "https://www.tenable.com/plugins/nessus/125092", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Amazon Linux AMI Security Advisory ALAS-2019-1205.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125092);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"ALAS\", value:\"2019-1205\");\n\n script_name(english:\"Amazon Linux AMI : kernel (ALAS-2019-1205) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Amazon Linux AMI host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\" - Microarchitectural Store Buffer Data Sampling (MSBDS)\n (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS)\n (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS)\n (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM) (CVE-2019-11091)\n\nMSBDS leaks Store Buffer Entries which can be speculatively forwarded\nto a dependent load (store-to-load forwarding) as an optimization. The\nforward can also happen to a faulting or assisting load operation for\na different memory address, which can cause an issue under certain\nconditions. Store buffers are partitioned between Hyper-Threads so\ncross thread forwarding is not possible. But if a thread enters or\nexits a sleep state the store buffer is repartitioned which can expose\ndata from one thread to the other.\n\nMFBDS leaks Fill Buffer Entries. Fill buffers are used internally to\nmanage L1 miss situations and to hold data which is returned or sent\nin response to a memory or I/O operation. Fill buffers can forward\ndata to a load operation and also write data to the cache. When the\nfill buffer is deallocated it can retain the stale data of the\npreceding operations which can then be forwarded to a faulting or\nassisting load operation, which can cause an issue under certain\nconditions. Fill buffers are shared between Hyper-Threads so cross\nthread leakage is possible.\n\nMLDPS leaks Load Port Data. Load ports are used to perform load\noperations from memory or I/O. The received data is then forwarded to\nthe register file or a subsequent operation. In some implementations\nthe Load Port can contain stale data from a previous operation which\ncan be forwarded to faulting or assisting loads under certain\nconditions, which again can cause an issue eventually. Load ports are\nshared between Hyper-Threads so cross thread leakage is possible.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://alas.aws.amazon.com/ALAS-2019-1205.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\n\"Run 'yum update kernel' and reboot your instance to update your\nsystem.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-debuginfo-common-i686\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:kernel-tools-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:amazon:linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Amazon Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AmazonLinux/release\", \"Host/AmazonLinux/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/AmazonLinux/release\");\nif (isnull(release) || !strlen(release)) audit(AUDIT_OS_NOT, \"Amazon Linux\");\nos_ver = pregmatch(pattern: \"^AL(A|\\d)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Amazon Linux\");\nos_ver = os_ver[1];\nif (os_ver != \"A\")\n{\n if (os_ver == 'A') os_ver = 'AMI';\n audit(AUDIT_OS_NOT, \"Amazon Linux AMI\", \"Amazon Linux \" + os_ver);\n}\n\nif (!get_kb_item(\"Host/AmazonLinux/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\nflag = 0;\nif (rpm_check(release:\"ALA\", reference:\"kernel-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-debuginfo-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"i686\", reference:\"kernel-debuginfo-common-i686-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-devel-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-headers-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-tools-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-tools-debuginfo-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"kernel-tools-devel-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"perf-4.14.114-83.126.amzn1\")) flag++;\nif (rpm_check(release:\"ALA\", reference:\"perf-debuginfo-4.14.114-83.126.amzn1\")) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-debuginfo / kernel-debuginfo-common-i686 / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:44", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 7.4 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : qemu-kvm (RHSA-2019:1185) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:7.4"], "id": "REDHAT-RHSA-2019-1185.NASL", "href": "https://www.tenable.com/plugins/nessus/125051", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1185. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125051);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1185\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : qemu-kvm (RHSA-2019:1185) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.4 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1185\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.4\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.4([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.4\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1185\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-141.el7_4.10\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-141.el7_4.10\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-141.el7_4.10\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-141.el7_4.10\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-141.el7_4.10\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:35", "description": "The version of Citrix XenServer running on the remote host is missing a security hotfix. It is, therefore, affected by microarchitectural data sampling speculative side-channel vulnerabilities. These vulnerabilities may allow a local attacker on a guest machine to sample the contents of memory reads and writes. Please refer to the vendor advisory for mitigating factors.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-30T00:00:00", "type": "nessus", "title": "Citrix XenServer Microarchitectural Data Sampling Speculative Side-Channel Vulnerabilities (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout) (CTX2251995)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-10-30T00:00:00", "cpe": ["cpe:/a:citrix:xenserver"], "id": "CITRIX_XENSERVER_CTX251995.NASL", "href": "https://www.tenable.com/plugins/nessus/125549", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125549);\n script_version(\"1.2\");\n script_cvs_date(\"Date: 2019/10/30 13:24:46\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_bugtraq_id(108330);\n\n script_name(english:\"Citrix XenServer Microarchitectural Data Sampling Speculative Side-Channel Vulnerabilities (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout) (CTX2251995)\");\n script_summary(english:\"Checks for patches.\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"A server virtualization platform installed on the remote host is\nmissing a security patch.\");\n script_set_attribute(attribute:\"description\", value:\n\"The version of Citrix XenServer running on the remote host is missing\na security hotfix. It is, therefore, affected by microarchitectural\ndata sampling speculative side-channel vulnerabilities. These\nvulnerabilities may allow a local attacker on a guest machine to\nsample the contents of memory reads and writes. Please refer to the\nvendor advisory for mitigating factors.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://support.citrix.com/article/CTX251995\");\n script_set_attribute(attribute:\"solution\", value:\n\"Apply the appropriate hotfix according to the vendor advisory.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/30\");\n\n script_set_attribute(attribute:\"plugin_type\",value:\"local\");\n script_set_attribute(attribute:\"cpe\",value:\"cpe:/a:citrix:xenserver\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Misc.\");\n\n script_copyright(english:\"This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"citrix_xenserver_version.nbin\");\n script_require_keys(\"Host/XenServer/version\");\n\n exit(0);\n}\n\ninclude(\"vcf.inc\");\ninclude(\"vcf_extras.inc\");\n\napp_info = vcf::xenserver::get_app_info();\n\nconstraints = [\n { \"equal\" : \"7.0\", \"patches\" : # XenServer 7.0\n [\"XS70E068\"] }, # CTX250038\n { \"equal\" : \"7.1.2\", \"patches\" : # XenServer 7.1 LTSR CU2\n [\"XS71ECU2008\"] }, # CTX250039\n { \"equal\" : \"7.6\", \"patches\" : # XenServer 7.6\n [\"XS76E004\"] }, # CTX250040\n { \"equal\" : \"8.0\", \"patches\" : # XenServer 8.0\n [\"XS80E001\"] } # CTX250041\n];\n\nvcf::xenserver::check_version_and_report(app_info:app_info, constraints:constraints, severity:SECURITY_WARNING);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:25", "description": "DLA-1789-1 shipped updated CPU microcode for most types of Intel CPUs as mitigations for the MSBDS, MFBDS, MLPDS and MDSUM hardware vulnerabilities.\n\nThis update provides additional support for some Sandybridge server and Core-X CPUs which were not covered in the original May microcode release. For a list of specific CPU models now supported please refer to the entries listed under CPUID 206D6 and 206D7 at https://www.intel.com/content/dam/www/public/us/en/documents/corporate\n-information/SA00233-microcode-update-guidance_05132019.pdf\n\nFor Debian 8 'Jessie', these problems have been fixed in version 3.20190618.1~deb8u1 of the intel-microcode package.\n\nWe recommend that you upgrade your intel-microcode packages.\n\nNOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Debian DLA-1789-2 : intel-microcode security update (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-11T00:00:00", "cpe": ["p-cpe:/a:debian:debian_linux:intel-microcode", "cpe:/o:debian:debian_linux:8.0"], "id": "DEBIAN_DLA-1789.NASL", "href": "https://www.tenable.com/plugins/nessus/125175", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Debian Security Advisory DLA-1789-2. The text\n# itself is copyright (C) Software in the Public Interest, Inc.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125175);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/11\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Debian DLA-1789-2 : intel-microcode security update (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks dpkg output for the updated package.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Debian host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"DLA-1789-1 shipped updated CPU microcode for most types of Intel CPUs\nas mitigations for the MSBDS, MFBDS, MLPDS and MDSUM hardware\nvulnerabilities.\n\nThis update provides additional support for some Sandybridge server\nand Core-X CPUs which were not covered in the original May microcode\nrelease. For a list of specific CPU models now supported please refer\nto the entries listed under CPUID 206D6 and 206D7 at\nhttps://www.intel.com/content/dam/www/public/us/en/documents/corporate\n-information/SA00233-microcode-update-guidance_05132019.pdf\n\nFor Debian 8 'Jessie', these problems have been fixed in version\n3.20190618.1~deb8u1 of the intel-microcode package.\n\nWe recommend that you upgrade your intel-microcode packages.\n\nNOTE: Tenable Network Security has extracted the preceding description\nblock directly from the DLA security advisory. Tenable has attempted\nto automatically clean and format it as much as possible without\nintroducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://lists.debian.org/debian-lts-announce/2019/06/msg00018.html\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://packages.debian.org/source/jessie/intel-microcode\"\n );\n # https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-update-guidance_05132019.pdf\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?100fa039\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Upgrade the affected intel-microcode package.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:intel-microcode\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:debian:debian_linux:8.0\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/06/20\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Debian Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Debian/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"debian_package.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/Debian/release\")) audit(AUDIT_OS_NOT, \"Debian\");\nif (!get_kb_item(\"Host/Debian/dpkg-l\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\nflag = 0;\nif (deb_check(release:\"8.0\", prefix:\"intel-microcode\", reference:\"3.20190618~deb8u1\")) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:deb_report_get());\n else security_warning(0);\n exit(0);\n}\nelse audit(AUDIT_HOST_NOT, \"affected\");\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "a. Hypervisor Specific and Hypervisor-Assisted Guest Mitigations for MDS vulnerabilities\n\nvCenter Server, ESXi, Workstation, and Fusion updates support Hypervisor-Specific and Hypervisor-Assisted Guest Mitigations for MDS speculative execution vulnerabilities. These updates expose new CPU control bits via microcode listed in the table below to the Virtual Machine layer. VMware has evaluated the severity of these issues to be in the Moderate severity range with a maximum CVSSv3 base score of", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "VMSA-2019-0008 : MDS Vulnerabilities (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["cpe:/o:vmware:esxi:6.0", "cpe:/o:vmware:esxi:6.5", "cpe:/o:vmware:esxi:6.7"], "id": "VMWARE_VMSA-2019-0008.NASL", "href": "https://www.tenable.com/plugins/nessus/125146", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from VMware Security Advisory 2019-0008. \n# The text itself is copyright (C) VMware Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125146);\n script_version(\"1.5\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"VMSA\", value:\"2019-0008\");\n script_xref(name:\"IAVA\", value:\"2019-A-0167\");\n\n script_name(english:\"VMSA-2019-0008 : MDS Vulnerabilities (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks esxupdate output for the patches\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote VMware ESXi host is missing one or more security-related\npatches.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"a. Hypervisor Specific and Hypervisor-Assisted Guest Mitigations for\nMDS vulnerabilities\n\nvCenter Server, ESXi, Workstation, and Fusion updates support\nHypervisor-Specific and Hypervisor-Assisted Guest Mitigations for MDS\nspeculative execution vulnerabilities. These updates expose new CPU\ncontrol bits via microcode listed in the table below to the Virtual\nMachine layer. VMware has evaluated the severity of these issues to be\nin the Moderate severity range with a maximum CVSSv3 base score of\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://lists.vmware.com/pipermail/security-announce/2019/000456.html\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Apply the missing patches.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:vmware:esxi:6.0\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:vmware:esxi:6.5\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:vmware:esxi:6.7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"VMware ESX Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/VMware/release\", \"Host/VMware/version\");\n script_require_ports(\"Host/VMware/esxupdate\", \"Host/VMware/esxcli_software_vibs\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"vmware_esx_packages.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/VMware/release\")) audit(AUDIT_OS_NOT, \"VMware ESX / ESXi\");\nif (\n !get_kb_item(\"Host/VMware/esxcli_software_vibs\") &&\n !get_kb_item(\"Host/VMware/esxupdate\")\n) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ninit_esx_check(date:\"2019-05-14\");\nflag = 0;\n\n\nif (esx_check(ver:\"ESXi 6.0\", vib:\"VMware:cpu-microcode:6.0.0-3.116.13635687\")) flag++;\nif (esx_check(ver:\"ESXi 6.0\", vib:\"VMware:esx-base:6.0.0-3.116.13635687\")) flag++;\nif (esx_check(ver:\"ESXi 6.0\", vib:\"VMware:vsan:6.0.0-3.116.13111540\")) flag++;\nif (esx_check(ver:\"ESXi 6.0\", vib:\"VMware:vsanhealth:6.0.0-3000000.3.0.3.116.13111541\")) flag++;\n\nif (esx_check(ver:\"ESXi 6.5\", vib:\"VMware:cpu-microcode:6.5.0-2.88.13635690\")) flag++;\nif (esx_check(ver:\"ESXi 6.5\", vib:\"VMware:esx-base:6.5.0-2.88.13635690\")) flag++;\nif (esx_check(ver:\"ESXi 6.5\", vib:\"VMware:esx-tboot:6.5.0-2.88.13635690\")) flag++;\nif (esx_check(ver:\"ESXi 6.5\", vib:\"VMware:vsan:6.5.0-2.88.13111446\")) flag++;\nif (esx_check(ver:\"ESXi 6.5\", vib:\"VMware:vsanhealth:6.5.0-2.88.13111447\")) flag++;\n\nif (esx_check(ver:\"ESXi 6.7\", vib:\"VMware:cpu-microcode:6.7.0-3.77.15018017\")) flag++;\nif (esx_check(ver:\"ESXi 6.7\", vib:\"VMware:esx-base:6.7.0-3.77.15018017\")) flag++;\nif (esx_check(ver:\"ESXi 6.7\", vib:\"VMware:esx-update:6.7.0-3.77.15018017\")) flag++;\nif (esx_check(ver:\"ESXi 6.7\", vib:\"VMware:vsan:6.7.0-3.77.14914424\")) flag++;\nif (esx_check(ver:\"ESXi 6.7\", vib:\"VMware:vsanhealth:6.7.0-3.77.14914425\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:esx_report_get());\n else security_warning(0);\n exit(0);\n}\nelse audit(AUDIT_HOST_NOT, \"affected\");\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:34", "description": "An update for kernel is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "CentOS 7 : kernel (CESA-2019:1168) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:centos:centos:bpftool", "p-cpe:/a:centos:centos:kernel", "p-cpe:/a:centos:centos:kernel-abi-whitelists", "p-cpe:/a:centos:centos:kernel-debug", "p-cpe:/a:centos:centos:kernel-debug-devel", "p-cpe:/a:centos:centos:kernel-devel", "p-cpe:/a:centos:centos:kernel-doc", "p-cpe:/a:centos:centos:kernel-headers", "p-cpe:/a:centos:centos:kernel-tools", "p-cpe:/a:centos:centos:kernel-tools-libs", "p-cpe:/a:centos:centos:kernel-tools-libs-devel", "p-cpe:/a:centos:centos:perf", "p-cpe:/a:centos:centos:python-perf", "cpe:/o:centos:centos:7"], "id": "CENTOS_RHSA-2019-1168.NASL", "href": "https://www.tenable.com/plugins/nessus/125167", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1168 and \n# CentOS Errata and Security Advisory 2019:1168 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125167);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1168\");\n\n script_name(english:\"CentOS 7 : kernel (CESA-2019:1168) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote CentOS host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n # https://lists.centos.org/pipermail/centos-announce/2019-May/023314.html\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?18841de9\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected kernel packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:bpftool\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:centos:centos:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"CentOS Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/CentOS/release\", \"Host/CentOS/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/CentOS/release\");\nif (isnull(release) || \"CentOS\" >!< release) audit(AUDIT_OS_NOT, \"CentOS\");\nos_ver = pregmatch(pattern: \"CentOS(?: Linux)? release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"CentOS\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"CentOS 7.x\", \"CentOS \" + os_ver);\n\nif (!get_kb_item(\"Host/CentOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"CentOS\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"bpftool-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-abi-whitelists-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-debug-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-debug-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-doc-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-headers-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-tools-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"perf-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"CentOS-7\", cpu:\"x86_64\", reference:\"python-perf-3.10.0-957.12.2.el7\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"bpftool / kernel / kernel-abi-whitelists / kernel-debug / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:47", "description": "According to its self-reported version number, the Xen hypervisor installed on the remote host is affected by microarchitectural data sampling speculative side-channel vulnerabilities. These vulnerabilities may allow a local attacker on a guest machine to sample the contents of memory reads and writes. Only a subset of Intel x86 processors are affected.\n\nNote that Nessus has checked the changeset versions based on the xen.git change log. Nessus did not check guest hardware configurations or if patches were applied manually to the source code before a recompile and reinstall.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-24T00:00:00", "type": "nessus", "title": "Xen Project Microarchitectural Data Sampling Speculative Side-Channel Vulnerabilities (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout) (XSA-297)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-07-10T00:00:00", "cpe": ["cpe:/o:xen:xen"], "id": "XEN_SERVER_XSA-297.NASL", "href": "https://www.tenable.com/plugins/nessus/125389", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125389);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/07/10\");\n\n script_xref(name:\"IAVA\", value:\"2019-A-0168-S\");\n\n script_name(english:\"Xen Project Microarchitectural Data Sampling Speculative Side-Channel Vulnerabilities (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout) (XSA-297)\");\n script_summary(english:\"Checks 'xl info' output for the Xen hypervisor version.\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_bugtraq_id(108330);\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Xen hypervisor installation is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to its self-reported version number, the Xen hypervisor\ninstalled on the remote host is affected by microarchitectural data\nsampling speculative side-channel vulnerabilities. These\nvulnerabilities may allow a local attacker on a guest machine to sample\nthe contents of memory reads and writes. Only a subset of Intel x86\nprocessors are affected.\n\nNote that Nessus has checked the changeset versions based on the\nxen.git change log. Nessus did not check guest hardware configurations\nor if patches were applied manually to the source code before a\nrecompile and reinstall.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://xenbits.xen.org/xsa/advisory-297.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://xenbits.xen.org/gitweb/?p=xen.git;a=summary\");\n script_set_attribute(attribute:\"solution\", value:\n\"Apply the appropriate patch according to the vendor advisory.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/24\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:xen:xen\");\n script_set_attribute(attribute:\"potential_vulnerability\", value:\"true\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Misc.\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"xen_server_detect.nbin\");\n script_require_keys(\"installed_sw/Xen Hypervisor\", \"Settings/ParanoidReport\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"install_func.inc\");\ninclude(\"misc_func.inc\");\n\napp_name = \"Xen Hypervisor\";\ninstall = get_single_install(app_name:app_name);\nif (report_paranoia < 2) audit(AUDIT_PARANOID);\n\nversion = install['version'];\ndisplay_version = install['display_version'];\npath = install['path'];\nmanaged_status = install['Managed status'];\nchangeset = install['Changeset'];\n\nif (!empty_or_null(changeset))\n display_version += \" (changeset \" + changeset + \")\";\n\n# Installations that are vendor-managed are handled by OS-specific local package checks\nif (managed_status == \"managed\")\n audit(AUDIT_INST_PATH_NOT_VULN, app_name, display_version, path);\n\nfixes['4.10']['fixed_ver'] = '4.10.4';\nfixes['4.10']['fixed_ver_display'] = '4.10.4-pre (changeset ab261f5)';\nfixes['4.10']['affected_ver_regex'] = '^4\\\\.10\\\\.';\nfixes['4.10']['affected_changesets'] = make_list(\"71f4a76\", \"b32dde3\",\n \"0771bb6\", \"4852a15\", \"0fe82c1\", \"8f0b53c\", \"aa6978c\", \"923d4e8\",\n \"7ddfc2a\", \"f725721\", \"7dfea78\", \"f0c5805\", \"3f5490d\", \"d06f561\",\n \"92fc0b6\", \"b8071f3\", \"5200791\", \"3b0eebb\", \"5a81de4\", \"b2bbd34\",\n \"7842419\", \"9f663d2\", \"d176cd6\", \"a595111\", \"aae0d18\", \"631b902\",\n \"f6f1e94\", \"b450b20\", \"dfc7e3c\", \"382e4a6\", \"edbc9b0\", \"edb80d2\");\n\nfixes['4.11']['fixed_ver'] = '4.11.2';\nfixes['4.11']['fixed_ver_display'] = '4.11.2-pre (changeset a6e0749)';\nfixes['4.11']['affected_ver_regex'] = '^4\\\\.11\\\\.';\nfixes['4.11']['affected_changesets'] = make_list(\"bd03b27\", \"b09886e\",\n \"bac4405\", \"0d8e6f7\", \"9be6613\", \"f5cc6e1\", \"3b062f5\", \"0825fbd\",\n \"bdb0630\", \"eb8acba\", \"0ebfc81\", \"e983e8a\", \"348922b\", \"718a8d2\",\n \"fc46e15\", \"4db8fdd\", \"c74683a\", \"793d669\", \"1b0e77d\", \"dd32dab\",\n \"03afae6\", \"aea41c3\", \"935a4ad\", \"833788f\", \"b77bf91\", \"cf99010\",\n \"0c0f0ab\", \"e984846\", \"4f9ab5f\", \"c567b05\", \"6c197f9\", \"7bbd3a5\",\n \"92227e2\", \"4835974\", \"be58f86\", \"4298abd\", \"4f785ea\", \"1028304\",\n \"87f51bf\", \"dd492b8\", \"e2e3a1d\", \"850ca94\", \"514dccd\", \"e202feb\",\n \"1986728\", \"2cd833d\", \"de09411\", \"dd914e4\", \"63d7113\", \"af25f52\",\n \"91f2ad7\", \"0b2be0b\", \"7d1bd98\", \"d8b2418\", \"bf608fd\");\n\nfixes['4.12']['fixed_ver'] = '4.12.1';\nfixes['4.12']['fixed_ver_display'] = '4.12.1-pre (changeset 714207b)';\nfixes['4.12']['affected_ver_regex'] = '^4\\\\.12\\\\.';\nfixes['4.12']['affected_changesets'] = make_list(\"45d570e\", \"0a317c5\",\n \"fe1ba9d\", \"6d8f5e3\", \"944b400\", \"143712d\", \"fd2a34c\", \"e25d133\",\n \"7cf6fbc\", \"7f53be2\", \"eb90521\", \"c75d5fe\", \"e3a1ebe\", \"70d613d\",\n \"8593e79\", \"a6c708d\", \"36f0463\", \"c4b1a75\", \"18f6fb9\");\n\nfix = NULL;\nforeach ver_branch (keys(fixes))\n{\n if (version =~ fixes[ver_branch]['affected_ver_regex'])\n {\n ret = ver_compare(ver:version, fix:fixes[ver_branch]['fixed_ver']);\n if (ret < 0)\n fix = fixes[ver_branch]['fixed_ver_display'];\n else if (ret == 0)\n {\n if (empty_or_null(changeset))\n fix = fixes[ver_branch]['fixed_ver_display'];\n else\n foreach affected_changeset (fixes[ver_branch]['affected_changesets'])\n if (changeset == affected_changeset)\n fix = fixes[ver_branch]['fixed_ver_display'];\n }\n }\n}\n\nif (empty_or_null(fix))\n audit(AUDIT_INST_PATH_NOT_VULN, app_name, display_version, path);\n\nitems = make_array(\n \"Installed version\", display_version,\n \"Fixed version\", fix,\n \"Path\", path\n);\n\norder = make_list(\"Path\", \"Installed version\", \"Fixed version\");\nreport = report_items_str(report_items:items, ordered_fields:order) + '\\n';\n\nsecurity_report_v4(port:0, extra:report, severity:SECURITY_WARNING);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:22", "description": "The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2019-1168 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Oracle Linux 7 : kernel (ELSA-2019-1168)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-09-08T00:00:00", "cpe": ["cpe:/o:oracle:linux:7", "p-cpe:/a:oracle:linux:bpftool", "p-cpe:/a:oracle:linux:kernel", "p-cpe:/a:oracle:linux:kernel-abi-whitelists", "p-cpe:/a:oracle:linux:kernel-debug", "p-cpe:/a:oracle:linux:kernel-debug-devel", "p-cpe:/a:oracle:linux:kernel-devel", "p-cpe:/a:oracle:linux:kernel-headers", "p-cpe:/a:oracle:linux:kernel-tools", "p-cpe:/a:oracle:linux:kernel-tools-libs", "p-cpe:/a:oracle:linux:kernel-tools-libs-devel", "p-cpe:/a:oracle:linux:perf", "p-cpe:/a:oracle:linux:python-perf"], "id": "ORACLELINUX_ELSA-2019-1168.NASL", "href": "https://www.tenable.com/plugins/nessus/125187", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Oracle Linux Security Advisory ELSA-2019-1168.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125187);\n script_version(\"1.6\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/09/08\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"RHSA\", value:\"2019:1168\");\n\n script_name(english:\"Oracle Linux 7 : kernel (ELSA-2019-1168)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Oracle Linux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nELSA-2019-1168 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://linux.oracle.com/errata/ELSA-2019-1168.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:7\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:bpftool\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:python-perf\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"linux_alt_patch_detect.nasl\", \"ssh_get_info.nasl\");\n script_require_keys(\"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/local_checks_enabled\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('ksplice.inc');\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item('Host/OracleLinux')) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar release = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar os_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Oracle Linux');\nvar os_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'Oracle Linux 7', 'Oracle Linux ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Oracle Linux', cpu);\nif ('x86_64' >!< cpu) audit(AUDIT_ARCH_NOT, 'x86_64', cpu);\n\nvar machine_uptrack_level = get_one_kb_item('Host/uptrack-uname-r');\nif (machine_uptrack_level)\n{\n var trimmed_uptrack_level = ereg_replace(string:machine_uptrack_level, pattern:\"\\.(x86_64|i[3-6]86|aarch64)$\", replace:'');\n var fixed_uptrack_levels = ['3.10.0-957.12.2.el7'];\n foreach var fixed_uptrack_level ( fixed_uptrack_levels ) {\n if (rpm_spec_vers_cmp(a:trimmed_uptrack_level, b:fixed_uptrack_level) >= 0)\n {\n audit(AUDIT_PATCH_INSTALLED, 'KSplice hotfix for ELSA-2019-1168');\n }\n }\n __rpm_report = 'Running KSplice level of ' + trimmed_uptrack_level + ' does not meet the minimum fixed level of ' + join(fixed_uptrack_levels, sep:' / ') + ' for this advisory.\\n\\n';\n}\n\nvar kernel_major_minor = get_kb_item('Host/uname/major_minor');\nif (empty_or_null(kernel_major_minor)) exit(1, 'Unable to determine kernel major-minor level.');\nvar expected_kernel_major_minor = '3.10';\nif (kernel_major_minor != expected_kernel_major_minor)\n audit(AUDIT_OS_NOT, 'running kernel level ' + expected_kernel_major_minor + ', it is running kernel level ' + kernel_major_minor);\n\nvar pkgs = [\n {'reference':'bpftool-3.10.0-957.12.2.el7', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-3.10.0-957.12.2.el7', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-3.10.0'},\n {'reference':'kernel-abi-whitelists-3.10.0-957.12.2.el7', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-abi-whitelists-3.10.0'},\n {'reference':'kernel-debug-3.10.0-957.12.2.el7', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-debug-3.10.0'},\n {'reference':'kernel-debug-devel-3.10.0-957.12.2.el7', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-debug-devel-3.10.0'},\n {'reference':'kernel-devel-3.10.0-957.12.2.el7', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-devel-3.10.0'},\n {'reference':'kernel-headers-3.10.0-957.12.2.el7', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-headers-3.10.0'},\n {'reference':'kernel-tools-3.10.0-957.12.2.el7', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-tools-3.10.0'},\n {'reference':'kernel-tools-libs-3.10.0-957.12.2.el7', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-tools-libs-3.10.0'},\n {'reference':'kernel-tools-libs-devel-3.10.0-957.12.2.el7', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'kernel-tools-libs-devel-3.10.0'},\n {'reference':'perf-3.10.0-957.12.2.el7', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'python-perf-3.10.0-957.12.2.el7', 'cpu':'x86_64', 'release':'7', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var sp = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = 'EL' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && release) {\n if (exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n } else {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'bpftool / kernel / kernel-abi-whitelists / etc');\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:52", "description": "An update for kernel is now available for Red Hat Enterprise Linux 7.2 Advanced Update Support, Red Hat Enterprise Linux 7.2 Telco Extended Update Support, and Red Hat Enterprise Linux 7.2 Update Services for SAP Solutions.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* rwsem in inconsistent state leading system to hung (BZ#1690318)", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 7 : kernel (RHSA-2019:1172) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:kernel", "p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists", "p-cpe:/a:redhat:enterprise_linux:kernel-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-headers", "p-cpe:/a:redhat:enterprise_linux:kernel-tools", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel", "p-cpe:/a:redhat:enterprise_linux:perf", "p-cpe:/a:redhat:enterprise_linux:perf-debuginfo", "p-cpe:/a:redhat:enterprise_linux:python-perf", "p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo", "cpe:/o:redhat:enterprise_linux:7.2"], "id": "REDHAT-RHSA-2019-1172.NASL", "href": "https://www.tenable.com/plugins/nessus/125118", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1172. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125118);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1172\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : kernel (RHSA-2019:1172) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 7.2\nAdvanced Update Support, Red Hat Enterprise Linux 7.2 Telco Extended\nUpdate Support, and Red Hat Enterprise Linux 7.2 Update Services for\nSAP Solutions.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* rwsem in inconsistent state leading system to hung (BZ#1690318)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1172\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.2\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.2([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.2\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1172\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1172\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", reference:\"kernel-abi-whitelists-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-debug-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-debug-devel-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-debuginfo-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-devel-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", reference:\"kernel-doc-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-headers-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-tools-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-tools-debuginfo-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-tools-libs-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"perf-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"perf-debuginfo-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"python-perf-3.10.0-327.78.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"2\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-3.10.0-327.78.2.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:33", "description": "According to the versions of the kvm package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :\n\n - Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer.(CVE-2018-12126)\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.i1/4^CVE-2018-12130i1/4%0\n\n - Microprocessors use a aEUR~load portaEURtm subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUaEURtms pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel.(CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.(CVE-2019-11091)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-30T00:00:00", "type": "nessus", "title": "EulerOS Virtualization 3.0.1.0 : kvm (EulerOS-SA-2019-1611)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-06T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:kvm", "cpe:/o:huawei:euleros:uvp:3.0.1.0"], "id": "EULEROS_SA-2019-1611.NASL", "href": "https://www.tenable.com/plugins/nessus/125563", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable Network Security, Inc.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125563);\n script_version(\"1.7\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/06\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n\n script_name(english:\"EulerOS Virtualization 3.0.1.0 : kvm (EulerOS-SA-2019-1611)\");\n script_summary(english:\"Checks the rpm output for the updated packages.\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS Virtualization host is missing multiple security\nupdates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the kvm package installed, the EulerOS\nVirtualization installation on the remote host is affected by the\nfollowing vulnerabilities :\n\n - Modern Intel microprocessors implement hardware-level\n micro-optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the\n processor to hand-off address generation logic into\n these sub-operations for optimized writes. Both of\n these sub-operations write to a shared distributed\n processor structure called the 'processor store\n buffer'. As a result, an unprivileged attacker could\n use this flaw to read private data resident within the\n CPU's processor store buffer.(CVE-2018-12126)\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time\n can be measured to infer data in the fill\n buffer.i1/4^CVE-2018-12130i1/4%0\n\n - Microprocessors use a aEUR~load portaEURtm subcomponent to\n perform load operations from memory or IO. During a\n load operation, the load port receives data from the\n memory or IO subsystem and then provides the data to\n the CPU registers and operations in the CPUaEURtms\n pipelines. Stale load operations results are stored in\n the 'load port' table until overwritten by newer\n operations. Certain load-port operations triggered by\n an attacker can be used to reveal data about previous\n stale requests leaking data back to the attacker via a\n timing side-channel.(CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user\n to potentially enable information disclosure via a side\n channel with local access.(CVE-2019-11091)\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the EulerOS security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-1611\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?80f311bb\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected kvm packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/31\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/30\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:uvp:3.0.1.0\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nrelease = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nuvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (uvp != \"3.0.1.0\") audit(AUDIT_OS_NOT, \"EulerOS Virtualization 3.0.1.0\");\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_ARCH_NOT, \"i686 / x86_64\", cpu);\n\nflag = 0;\n\npkgs = [\"kvm-4.4.11-30.014\"];\n\nforeach (pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kvm\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "From Red Hat Security Advisory 2019:1181 :\n\nAn update for qemu-kvm is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Oracle Linux 6 : qemu-kvm (ELSA-2019-1181) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:oracle:linux:qemu-guest-agent", "p-cpe:/a:oracle:linux:qemu-img", "p-cpe:/a:oracle:linux:qemu-kvm", "p-cpe:/a:oracle:linux:qemu-kvm-tools", "cpe:/o:oracle:linux:6"], "id": "ORACLELINUX_ELSA-2019-1181.NASL", "href": "https://www.tenable.com/plugins/nessus/125112", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Red Hat Security Advisory RHSA-2019:1181 and \n# Oracle Linux Security Advisory ELSA-2019-1181 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125112);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1181\");\n\n script_name(english:\"Oracle Linux 6 : qemu-kvm (ELSA-2019-1181) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Oracle Linux host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"From Red Hat Security Advisory 2019:1181 :\n\nAn update for qemu-kvm is now available for Red Hat Enterprise Linux\n6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://oss.oracle.com/pipermail/el-errata/2019-May/008728.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected qemu-kvm packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/OracleLinux\")) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nos_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Oracle Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Oracle Linux 6\", \"Oracle Linux \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Oracle Linux\", cpu);\n\nflag = 0;\nif (rpm_check(release:\"EL6\", reference:\"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"EL6\", cpu:\"x86_64\", reference:\"qemu-img-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"EL6\", cpu:\"x86_64\", reference:\"qemu-kvm-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"EL6\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-0.12.1.2-2.506.el6_10.3\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-guest-agent / qemu-img / qemu-kvm / qemu-kvm-tools\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:34", "description": "An update for rhvm-setup-plugins is now available for Red Hat Virtualization 4.3.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe rhvm-setup-plugins package adds functionality exclusive only to Red Hat Virtualization Manager, and is not available for the upstream ovirt-engine. It includes the configuration of the Red Hat Support plugin, copying downstream-only artifacts to the ISO domain, and links to the knowledgebase and other support material.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "RHEL 7 : Virtualization Manager (RHSA-2019:1205) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:rhvm-setup-plugins", "cpe:/o:redhat:enterprise_linux:7"], "id": "REDHAT-RHSA-2019-1205.NASL", "href": "https://www.tenable.com/plugins/nessus/125195", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1205. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125195);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1205\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : Virtualization Manager (RHSA-2019:1205) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated package\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for rhvm-setup-plugins is now available for Red Hat\nVirtualization 4.3.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe rhvm-setup-plugins package adds functionality exclusive only to\nRed Hat Virtualization Manager, and is not available for the upstream\novirt-engine. It includes the configuration of the Red Hat Support\nplugin, copying downstream-only artifacts to the ISO domain, and links\nto the knowledgebase and other support material.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1205\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected rhvm-setup-plugins package.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:rhvm-setup-plugins\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1205\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", reference:\"rhvm-setup-plugins-4.3.1-1.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"rhvm-setup-plugins\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:10", "description": "An update for kernel-rt is now available for Red Hat Enterprise Linux 8.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel-rt packages provide the Real Time Linux Kernel, which enables fine-tuning for systems with extremely high determinism requirements.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 8 : kernel-rt (RHSA-2019:1174) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:kernel-rt", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-core", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-core", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-modules", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-modules-extra", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-modules", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-modules-extra", "cpe:/o:redhat:enterprise_linux:8"], "id": "REDHAT-RHSA-2019-1174.NASL", "href": "https://www.tenable.com/plugins/nessus/125040", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1174. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125040);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1174\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 8 : kernel-rt (RHSA-2019:1174) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel-rt is now available for Red Hat Enterprise Linux\n8.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel-rt packages provide the Real Time Linux Kernel, which\nenables fine-tuning for systems with extremely high determinism\nrequirements.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1174\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:8\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^8([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 8.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1174\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1174\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-core-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-core-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-debuginfo-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-devel-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-kvm-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-kvm-debuginfo-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-modules-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-modules-extra-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debuginfo-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debuginfo-common-x86_64-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-devel-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-kvm-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-kvm-debuginfo-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-modules-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-modules-extra-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel-rt / kernel-rt-core / kernel-rt-debug / kernel-rt-debug-core / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:25", "description": "This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been identified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory (MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the new 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out https://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-28T00:00:00", "type": "nessus", "title": "SUSE SLED12 / SLES12 Security Update : libvirt (SUSE-SU-2019:1347-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-13T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:libvirt", "p-cpe:/a:novell:suse_linux:libvirt-admin", "p-cpe:/a:novell:suse_linux:libvirt-admin-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-client", "p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-daemon-hooks", "p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc", "p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu", "p-cpe:/a:novell:suse_linux:libvirt-daemon-xen", "p-cpe:/a:novell:suse_linux:libvirt-debugsource", "p-cpe:/a:novell:suse_linux:libvirt-doc", "p-cpe:/a:novell:suse_linux:libvirt-libs", "p-cpe:/a:novell:suse_linux:libvirt-libs-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock", "p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo", "p-cpe:/a:novell:suse_linux:libvirt-nss", "p-cpe:/a:novell:suse_linux:libvirt-nss-debuginfo", "cpe:/o:novell:suse_linux:12"], "id": "SUSE_SU-2019-1347-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125462", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1347-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125462);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/13\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"SUSE SLED12 / SLES12 Security Update : libvirt (SUSE-SU-2019:1347-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\",\n value:\"The remote SUSE host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\",\n value:\n\"This update for libvirt fixes the following issues :\n\nFour new speculative execution information leak issues have been\nidentified in Intel CPUs. (bsc#1111331)\n\nCVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\nCVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\nCVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\nCVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n(MDSUM)\n\nThese updates contain the libvirt adjustments, that pass through the\nnew 'md-clear' CPU flag (bsc#1135273).\n\nFor more information on this set of vulnerabilities, check out\nhttps://www.suse.com/support/kb/doc/?id=7023736\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1135273\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12126/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12127/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12130/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2019-11091/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/support/kb/doc/?id=7023736\"\n );\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191347-1/\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?8beb21f4\"\n );\n script_set_attribute(\n attribute:\"solution\",\n value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE Linux Enterprise Software Development Kit 12-SP4:zypper in -t\npatch SUSE-SLE-SDK-12-SP4-2019-1347=1\n\nSUSE Linux Enterprise Server 12-SP4:zypper in -t patch\nSUSE-SLE-SERVER-12-SP4-2019-1347=1\n\nSUSE Linux Enterprise Desktop 12-SP4:zypper in -t patch\nSUSE-SLE-DESKTOP-12-SP4-2019-1347=1\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-admin-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-client-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-interface-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-libxl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-lxc-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-network-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nodedev-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-nwfilter-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-qemu-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-secret-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-core-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-disk-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-iscsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-logical-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-mpath-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-rbd-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-driver-storage-scsi-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-hooks\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-daemon-xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-libs-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-lock-sanlock-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libvirt-nss-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:12\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/24\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/28\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED12|SLES12)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED12 / SLES12\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES12\" && (! preg(pattern:\"^(4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES12 SP4\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED12\" && (! preg(pattern:\"^(4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED12 SP4\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-xen-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-admin-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-admin-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-client-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-client-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-config-network-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-config-nwfilter-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-interface-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-interface-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-lxc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-lxc-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-network-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-network-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-nodedev-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-nodedev-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-nwfilter-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-nwfilter-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-qemu-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-qemu-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-secret-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-secret-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-core-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-core-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-disk-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-disk-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-iscsi-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-iscsi-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-logical-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-logical-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-mpath-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-mpath-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-scsi-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-driver-storage-scsi-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-hooks-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-lxc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-daemon-qemu-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-debugsource-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-doc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-libs-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-libs-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-lock-sanlock-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-lock-sanlock-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-nss-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", reference:\"libvirt-nss-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-admin-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-admin-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-client-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-client-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-network-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-nwfilter-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-libxl-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-debuginfo-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-lxc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-qemu-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-xen-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-debugsource-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-doc-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-libs-4.0.0-8.12.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-libs-debuginfo-4.0.0-8.12.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:40", "description": "An update for kernel is now available for Red Hat Enterprise Linux 6.6 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 6 : kernel (RHSA-2019:1193) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:kernel", "p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists", "p-cpe:/a:redhat:enterprise_linux:kernel-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-firmware", "p-cpe:/a:redhat:enterprise_linux:kernel-headers", "p-cpe:/a:redhat:enterprise_linux:perf", "p-cpe:/a:redhat:enterprise_linux:perf-debuginfo", "p-cpe:/a:redhat:enterprise_linux:python-perf", "p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo", "cpe:/o:redhat:enterprise_linux:6.6"], "id": "REDHAT-RHSA-2019-1193.NASL", "href": "https://www.tenable.com/plugins/nessus/125123", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1193. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125123);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1193\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : kernel (RHSA-2019:1193) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 6.6\nAdvanced Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1193\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-firmware\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:6.6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6\\.6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 6.6\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1193\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1193\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", reference:\"kernel-abi-whitelists-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-debug-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-debug-devel-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-debuginfo-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-devel-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", reference:\"kernel-doc-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", reference:\"kernel-firmware-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-headers-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"perf-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"perf-debuginfo-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"python-perf-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-2.6.32-504.78.2.el6\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:32", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 7.5 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : qemu-kvm (RHSA-2019:1183) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:7.5"], "id": "REDHAT-RHSA-2019-1183.NASL", "href": "https://www.tenable.com/plugins/nessus/125049", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1183. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125049);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1183\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : qemu-kvm (RHSA-2019:1183) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.5 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1183\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.5\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.5([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.5\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1183\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-156.el7_5.7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "This update for ucode-intel fixes the following issues :\n\nucode-intel was updated to official QSR 2019.1 microcode release (bsc#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127 CVE-2019-11091)\n\n---- new platforms ---------------------------------------- VLV C0 6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron N2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0 6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X series\n\nReadded Broadwell CPU ucode that was missing in last update :\n\nBDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core i7-69xx/68xx\n\nNote that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-22T00:00:00", "type": "nessus", "title": "SUSE SLED12 / SLES12 Security Update : ucode-intel (SUSE-SU-2019:1296-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-01-13T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:ucode-intel", "p-cpe:/a:novell:suse_linux:ucode-intel-debuginfo", "p-cpe:/a:novell:suse_linux:ucode-intel-debugsource", "cpe:/o:novell:suse_linux:12"], "id": "SUSE_SU-2019-1296-1.NASL", "href": "https://www.tenable.com/plugins/nessus/125333", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from SUSE update advisory SUSE-SU-2019:1296-1.\n# The text itself is copyright (C) SUSE.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125333);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/01/13\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"SUSE SLED12 / SLES12 Security Update : ucode-intel (SUSE-SU-2019:1296-1) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\",\n value:\"The remote SUSE host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\",\n value:\n\"This update for ucode-intel fixes the following issues :\n\nucode-intel was updated to official QSR 2019.1 microcode release\n(bsc#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127\nCVE-2019-11091)\n\n---- new platforms ---------------------------------------- VLV C0\n6-37-8/02 00000838 Atom Z series VLV C0 6-37-8/0C 00000838 Celeron\nN2xxx, Pentium N35xx VLV D0 6-37-9/0F 0000090c Atom E38xx CHV C0\n6-4c-3/01 00000368 Atom X series CHV D0 6-4c-4/01 00000411 Atom X\nseries\n\nReadded Broadwell CPU ucode that was missing in last update :\n\nBDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4; Core\ni7-69xx/68xx\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the SUSE security advisory. Tenable\nhas attempted to automatically clean and format it as much as possible\nwithout introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bugzilla.suse.com/show_bug.cgi?id=1111331\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12126/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12127/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2018-12130/\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://www.suse.com/security/cve/CVE-2019-11091/\"\n );\n # https://www.suse.com/support/update/announcement/2019/suse-su-20191296-1/\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?8799a77e\"\n );\n script_set_attribute(\n attribute:\"solution\",\n value:\n\"To install this SUSE Security Update use the SUSE recommended\ninstallation methods like YaST online_update or 'zypper patch'.\n\nAlternatively you can run the command listed for your product :\n\nSUSE OpenStack Cloud 7:zypper in -t patch\nSUSE-OpenStack-Cloud-7-2019-1296=1\n\nSUSE Linux Enterprise Server for SAP 12-SP2:zypper in -t patch\nSUSE-SLE-SAP-12-SP2-2019-1296=1\n\nSUSE Linux Enterprise Server for SAP 12-SP1:zypper in -t patch\nSUSE-SLE-SAP-12-SP1-2019-1296=1\n\nSUSE Linux Enterprise Server 12-SP4:zypper in -t patch\nSUSE-SLE-SERVER-12-SP4-2019-1296=1\n\nSUSE Linux Enterprise Server 12-SP3:zypper in -t patch\nSUSE-SLE-SERVER-12-SP3-2019-1296=1\n\nSUSE Linux Enterprise Server 12-SP2-LTSS:zypper in -t patch\nSUSE-SLE-SERVER-12-SP2-2019-1296=1\n\nSUSE Linux Enterprise Server 12-SP2-BCL:zypper in -t patch\nSUSE-SLE-SERVER-12-SP2-BCL-2019-1296=1\n\nSUSE Linux Enterprise Server 12-SP1-LTSS:zypper in -t patch\nSUSE-SLE-SERVER-12-SP1-2019-1296=1\n\nSUSE Linux Enterprise Server 12-LTSS:zypper in -t patch\nSUSE-SLE-SERVER-12-2019-1296=1\n\nSUSE Linux Enterprise Desktop 12-SP4:zypper in -t patch\nSUSE-SLE-DESKTOP-12-SP4-2019-1296=1\n\nSUSE Linux Enterprise Desktop 12-SP3:zypper in -t patch\nSUSE-SLE-DESKTOP-12-SP3-2019-1296=1\n\nSUSE Enterprise Storage 4:zypper in -t patch\nSUSE-Storage-4-2019-1296=1\n\nSUSE CaaS Platform 3.0 :\n\nTo install this update, use the SUSE CaaS Platform Velum dashboard. It\nwill inform you if it detects new updates and let you then trigger\nupdating of the complete cluster in a controlled way.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:ucode-intel-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:12\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/20\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/22\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2021 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"SuSE Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/SuSE/release\");\nif (isnull(release) || release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nos_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"SUSE\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED12|SLES12)$\", string:os_ver)) audit(AUDIT_OS_NOT, \"SUSE SLED12 / SLES12\", \"SUSE \" + os_ver);\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu !~ \"^i[3-6]86$\" && \"x86_64\" >!< cpu && \"s390x\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"SUSE \" + os_ver, cpu);\nif (cpu >!< \"x86_64\") audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\n\nsp = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(sp)) sp = \"0\";\nif (os_ver == \"SLES12\" && (! preg(pattern:\"^(0|1|2|3|4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLES12 SP0/1/2/3/4\", os_ver + \" SP\" + sp);\nif (os_ver == \"SLED12\" && (! preg(pattern:\"^(3|4)$\", string:sp))) audit(AUDIT_OS_NOT, \"SLED12 SP3/4\", os_ver + \" SP\" + sp);\n\n\nflag = 0;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"1\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"0\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"2\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"2\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLES12\", sp:\"2\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"4\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-debuginfo-20190514-13.44.1\")) flag++;\nif (rpm_check(release:\"SLED12\", sp:\"3\", cpu:\"x86_64\", reference:\"ucode-intel-debugsource-20190514-13.44.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"ucode-intel\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:10", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 6 : qemu-kvm (RHSA-2019:1181) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-guest-agent", "p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:6"], "id": "REDHAT-RHSA-2019-1181.NASL", "href": "https://www.tenable.com/plugins/nessus/125047", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1181. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125047);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1181\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : qemu-kvm (RHSA-2019:1181) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1181\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 6.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1181\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"qemu-img-0.12.1.2-2.506.el6_10.3\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"qemu-kvm-0.12.1.2-2.506.el6_10.3\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"qemu-kvm-debuginfo-0.12.1.2-2.506.el6_10.3\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-0.12.1.2-2.506.el6_10.3\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-0.12.1.2-2.506.el6_10.3\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-guest-agent / qemu-img / qemu-kvm / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:12", "description": "Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level micro- optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11091)", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Scientific Linux Security Update : kernel on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-02-24T00:00:00", "cpe": ["p-cpe:/a:fermilab:scientific_linux:bpftool", "p-cpe:/a:fermilab:scientific_linux:kernel", "p-cpe:/a:fermilab:scientific_linux:kernel-abi-whitelists", "p-cpe:/a:fermilab:scientific_linux:kernel-debug", "p-cpe:/a:fermilab:scientific_linux:kernel-debug-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-debug-devel", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:fermilab:scientific_linux:kernel-devel", "p-cpe:/a:fermilab:scientific_linux:kernel-doc", "p-cpe:/a:fermilab:scientific_linux:kernel-headers", "p-cpe:/a:fermilab:scientific_linux:kernel-tools", "p-cpe:/a:fermilab:scientific_linux:kernel-tools-debuginfo", "p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs", "p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs-devel", "p-cpe:/a:fermilab:scientific_linux:perf", "p-cpe:/a:fermilab:scientific_linux:perf-debuginfo", "p-cpe:/a:fermilab:scientific_linux:python-perf", "p-cpe:/a:fermilab:scientific_linux:python-perf-debuginfo", "x-cpe:/o:fermilab:scientific_linux"], "id": "SL_20190514_KERNEL_ON_SL7_X.NASL", "href": "https://www.tenable.com/plugins/nessus/125203", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text is (C) Scientific Linux.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125203);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2020/02/24\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"Scientific Linux Security Update : kernel on SL7.x x86_64 (20190514) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\n\"The remote Scientific Linux host is missing one or more security\nupdates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Security Fix(es) :\n\n - A flaw was found in the implementation of the 'fill\n buffer', a mechanism used by modern CPUs when a\n cache-miss is made on L1 CPU cache. If an attacker can\n generate a load operation that would create a page\n fault, the execution will continue speculatively with\n incorrect data from the fill buffer while the data is\n fetched from higher level caches. This response time can\n be measured to infer data in the fill buffer.\n (CVE-2018-12130)\n\n - Modern Intel microprocessors implement hardware-level\n micro- optimizations to improve the performance of\n writing data back to CPU caches. The write operation is\n split into STA (STore Address) and STD (STore Data)\n sub-operations. These sub-operations allow the processor\n to hand-off address generation logic into these\n sub-operations for optimized writes. Both of these\n sub-operations write to a shared distributed processor\n structure called the 'processor store buffer'. As a\n result, an unprivileged attacker could use this flaw to\n read private data resident within the CPU's processor\n store buffer. (CVE-2018-12126)\n\n - Microprocessors use a load port subcomponent to perform\n load operations from memory or IO. During a load\n operation, the load port receives data from the memory\n or IO subsystem and then provides the data to the CPU\n registers and operations in the CPUs pipelines. Stale\n load operations results are stored in the 'load port'\n table until overwritten by newer operations. Certain\n load-port operations triggered by an attacker can be\n used to reveal data about previous stale requests\n leaking data back to the attacker via a timing\n side-channel. (CVE-2018-12127)\n\n - Uncacheable memory on some microprocessors utilizing\n speculative execution may allow an authenticated user to\n potentially enable information disclosure via a side\n channel with local access. (CVE-2019-11091)\"\n );\n # https://listserv.fnal.gov/scripts/wa.exe?A2=ind1905&L=SCIENTIFIC-LINUX-ERRATA&P=3330\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?248977b9\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:bpftool\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fermilab:scientific_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"x-cpe:/o:fermilab:scientific_linux\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Scientific Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Scientific Linux \" >!< release) audit(AUDIT_HOST_NOT, \"running Scientific Linux\");\nos_ver = pregmatch(pattern: \"Scientific Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Scientific Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Scientific Linux 7.x\", \"Scientific Linux \" + os_ver);\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (cpu >!< \"x86_64\" && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Scientific Linux\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"bpftool-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", reference:\"kernel-abi-whitelists-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debug-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debug-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", reference:\"kernel-doc-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-headers-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"perf-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"perf-debuginfo-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"python-perf-3.10.0-957.12.2.el7\")) flag++;\nif (rpm_check(release:\"SL7\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-3.10.0-957.12.2.el7\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"bpftool / kernel / kernel-abi-whitelists / kernel-debug / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:47", "description": "Define md-clear CPUID bit.\n\nAssuming an updated host kernel and microcode, the md-clear bit will be automatically exposed to guests using the QEMU '-cpu host' arg, or libvirt 'host-model' or 'host-passthrough' configurations.\n\nGuests using a named CPU model it must be manually updated to add this extra CPU feature.\n\nResolves CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091\n\nNote that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website.\nTenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-17T00:00:00", "type": "nessus", "title": "Fedora 29 : 2:qemu / libvirt (2019-0332a96d31) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:fedoraproject:fedora:2:qemu", "p-cpe:/a:fedoraproject:fedora:libvirt", "cpe:/o:fedoraproject:fedora:29"], "id": "FEDORA_2019-0332A96D31.NASL", "href": "https://www.tenable.com/plugins/nessus/125228", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Fedora Security Advisory FEDORA-2019-0332a96d31.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125228);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"FEDORA\", value:\"2019-0332a96d31\");\n\n script_name(english:\"Fedora 29 : 2:qemu / libvirt (2019-0332a96d31) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Fedora host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Define md-clear CPUID bit.\n\nAssuming an updated host kernel and microcode, the md-clear bit will\nbe automatically exposed to guests using the QEMU '-cpu host' arg, or\nlibvirt 'host-model' or 'host-passthrough' configurations.\n\nGuests using a named CPU model it must be manually updated to add this\nextra CPU feature.\n\nResolves CVE-2018-12126, CVE-2018-12127, CVE-2018-12130,\nCVE-2019-11091\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the Fedora update system website.\nTenable has attempted to automatically clean and format it as much as\npossible without introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bodhi.fedoraproject.org/updates/FEDORA-2019-0332a96d31\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected 2:qemu and / or libvirt packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fedoraproject:fedora:2:qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fedoraproject:fedora:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:fedoraproject:fedora:29\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/17\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Fedora Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Fedora\" >!< release) audit(AUDIT_OS_NOT, \"Fedora\");\nos_ver = pregmatch(pattern: \"Fedora.*release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Fedora\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^29([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Fedora 29\", \"Fedora \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Fedora\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"FC29\", reference:\"qemu-3.0.1-3.fc29\", epoch:\"2\")) flag++;\nif (rpm_check(release:\"FC29\", reference:\"libvirt-4.7.0-3.fc29\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"2:qemu / libvirt\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:54", "description": "Microarchitectural Data Sampling speculative side channel [XSA-297, CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091] additional patches so above applies cleanly work around grub2 issues in dom0\n\nNote that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website.\nTenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-20T00:00:00", "type": "nessus", "title": "Fedora 30 : xen (2019-6458474bf2) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:fedoraproject:fedora:xen", "cpe:/o:fedoraproject:fedora:30"], "id": "FEDORA_2019-6458474BF2.NASL", "href": "https://www.tenable.com/plugins/nessus/125272", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Fedora Security Advisory FEDORA-2019-6458474bf2.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125272);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"FEDORA\", value:\"2019-6458474bf2\");\n\n script_name(english:\"Fedora 30 : xen (2019-6458474bf2) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated package.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Fedora host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"Microarchitectural Data Sampling speculative side channel [XSA-297,\nCVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091]\nadditional patches so above applies cleanly work around grub2 issues\nin dom0\n\nNote that Tenable Network Security has extracted the preceding\ndescription block directly from the Fedora update system website.\nTenable has attempted to automatically clean and format it as much as\npossible without introducing additional issues.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://bodhi.fedoraproject.org/updates/FEDORA-2019-6458474bf2\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected xen package.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:fedoraproject:fedora:xen\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:fedoraproject:fedora:30\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/18\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/20\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Fedora Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Fedora\" >!< release) audit(AUDIT_OS_NOT, \"Fedora\");\nos_ver = pregmatch(pattern: \"Fedora.*release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Fedora\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^30([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Fedora 30\", \"Fedora \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Fedora\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"FC30\", reference:\"xen-4.11.1-5.fc30\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"xen\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:44", "description": "An update for kernel is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* aio O_DIRECT writes to non-page-aligned file locations on ext4 can result in the overlapped portion of the page containing zeros (BZ#1686170)\n\n* Tolerate new s390x crypto hardware for migration (BZ#1695496)", "cvss3": {"score": 5.6, "vector": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N"}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "CentOS 6 : kernel (CESA-2019:1169) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:centos:centos:kernel", "p-cpe:/a:centos:centos:kernel-abi-whitelists", "p-cpe:/a:centos:centos:kernel-debug", "p-cpe:/a:centos:centos:kernel-debug-devel", "p-cpe:/a:centos:centos:kernel-devel", "p-cpe:/a:centos:centos:kernel-doc", "p-cpe:/a:centos:centos:kernel-firmware", "p-cpe:/a:centos:centos:kernel-headers", "p-cpe:/a:centos:centos:perf", "p-cpe:/a:centos:centos:python-perf", "cpe:/o:centos:centos:6"], "id": "CENTOS_RHSA-2019-1169.NASL", "href": "https://www.tenable.com/plugins/nessus/125168", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1169 and \n# CentOS Errata and Security Advisory 2019:1169 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125168);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1169\");\n\n script_name(english:\"CentOS 6 : kernel (CESA-2019:1169) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote CentOS host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* aio O_DIRECT writes to non-page-aligned file locations on ext4 can\nresult in the overlapped portion of the page containing zeros\n(BZ#1686170)\n\n* Tolerate new s390x crypto hardware for migration (BZ#1695496)\"\n );\n # https://lists.centos.org/pipermail/centos-announce/2019-May/023309.html\n script_set_attribute(\n attribute:\"see_also\",\n value:\"http://www.nessus.org/u?40116af0\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected kernel packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-firmware\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:centos:centos:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"CentOS Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/CentOS/release\", \"Host/CentOS/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/CentOS/release\");\nif (isnull(release) || \"CentOS\" >!< release) audit(AUDIT_OS_NOT, \"CentOS\");\nos_ver = pregmatch(pattern: \"CentOS(?: Linux)? release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"CentOS\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"CentOS 6.x\", \"CentOS \" + os_ver);\n\nif (!get_kb_item(\"Host/CentOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"CentOS\", cpu);\n\n\nflag = 0;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-abi-whitelists-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-debug-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-debug-devel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-devel-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-doc-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-firmware-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"kernel-headers-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"perf-2.6.32-754.14.2.el6\")) flag++;\nif (rpm_check(release:\"CentOS-6\", reference:\"python-perf-2.6.32-754.14.2.el6\")) flag++;\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / kernel-debug-devel / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-06-23T15:15:32", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a aEUR~load portaEURtm subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUaEURtms pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nNote that Tenable Network Security has attempted to extract the preceding descripti
(RHSA-2019:1204) Important: vdsm security update
