Lucene search

K
nessusThis script is Copyright (C) 2021-2022 and is owned by Tenable, Inc. or an Affiliate thereof.SUSE_SU-2019-14174-1.NASL
HistoryJun 10, 2021 - 12:00 a.m.

SUSE SLES11 Security Update : openssl (SUSE-SU-2019:14174-1)

2021-06-1000:00:00
This script is Copyright (C) 2021-2022 and is owned by Tenable, Inc. or an Affiliate thereof.
www.tenable.com
8

The remote SUSE Linux SLES11 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2019:14174-1 advisory.

  • Normally in OpenSSL EC groups always have a co-factor present and this is used in side channel resistant code paths. However, in some cases, it is possible to construct a group using explicit parameters (instead of using a named curve). In those cases it is possible that such a group does not have the cofactor present. This can occur even where all the parameters match a known named curve. If such a curve is used then OpenSSL falls back to non-side channel resistant code paths which may result in full key recovery during an ECDSA signature operation. In order to be vulnerable an attacker would have to have the ability to time the creation of a large number of signatures where explicit parameters with no co-factor present are in use by an application using libcrypto. For the avoidance of doubt libssl is not vulnerable because explicit parameters are never used. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s). (CVE-2019-1547)

  • In situations where an attacker receives automated notification of the success or failure of a decryption attempt an attacker, after sending a very large number of messages to be decrypted, can recover a CMS/PKCS7 transported encryption key or decrypt any RSA encrypted message that was encrypted with the public RSA key, using a Bleichenbacher padding oracle attack. Applications are not affected if they use a certificate together with the private RSA key to the CMS_decrypt or PKCS7_decrypt functions to select the correct recipient info to decrypt. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s). (CVE-2019-1563)

Note that Nessus has not tested for this issue but has instead relied only on the application’s self-reported version number.

#%NASL_MIN_LEVEL 70300
##
# (C) Tenable Network Security, Inc.
#
# The package checks in this plugin were extracted from
# SUSE update advisory SUSE-SU-2019:14174-1. The text itself
# is copyright (C) SUSE.
##

include('deprecated_nasl_level.inc');
include('compat.inc');

if (description)
{
  script_id(150664);
  script_version("1.3");
  script_set_attribute(attribute:"plugin_modification_date", value:"2022/05/09");

  script_cve_id("CVE-2019-1547", "CVE-2019-1563");
  script_xref(name:"SuSE", value:"SUSE-SU-2019:14174-1");
  script_xref(name:"IAVA", value:"2019-A-0303-S");

  script_name(english:"SUSE SLES11 Security Update : openssl (SUSE-SU-2019:14174-1)");

  script_set_attribute(attribute:"synopsis", value:
"The remote SUSE host is missing one or more security updates.");
  script_set_attribute(attribute:"description", value:
"The remote SUSE Linux SLES11 host has packages installed that are affected by multiple vulnerabilities as referenced in
the SUSE-SU-2019:14174-1 advisory.

  - Normally in OpenSSL EC groups always have a co-factor present and this is used in side channel resistant
    code paths. However, in some cases, it is possible to construct a group using explicit parameters (instead
    of using a named curve). In those cases it is possible that such a group does not have the cofactor
    present. This can occur even where all the parameters match a known named curve. If such a curve is used
    then OpenSSL falls back to non-side channel resistant code paths which may result in full key recovery
    during an ECDSA signature operation. In order to be vulnerable an attacker would have to have the ability
    to time the creation of a large number of signatures where explicit parameters with no co-factor present
    are in use by an application using libcrypto. For the avoidance of doubt libssl is not vulnerable because
    explicit parameters are never used. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL
    1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s). (CVE-2019-1547)

  - In situations where an attacker receives automated notification of the success or failure of a decryption
    attempt an attacker, after sending a very large number of messages to be decrypted, can recover a
    CMS/PKCS7 transported encryption key or decrypt any RSA encrypted message that was encrypted with the
    public RSA key, using a Bleichenbacher padding oracle attack. Applications are not affected if they use a
    certificate together with the private RSA key to the CMS_decrypt or PKCS7_decrypt functions to select the
    correct recipient info to decrypt. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL
    1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s). (CVE-2019-1563)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version
number.");
  script_set_attribute(attribute:"see_also", value:"https://bugzilla.suse.com/1150003");
  script_set_attribute(attribute:"see_also", value:"https://bugzilla.suse.com/1150250");
  # https://lists.suse.com/pipermail/sle-security-updates/2019-September/005936.html
  script_set_attribute(attribute:"see_also", value:"http://www.nessus.org/u?e8df511a");
  script_set_attribute(attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2019-1547");
  script_set_attribute(attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2019-1563");
  script_set_attribute(attribute:"solution", value:
"Update the affected packages.");
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:P/I:N/A:N");
  script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
  script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-1563");
  script_set_attribute(attribute:"cvss3_score_source", value:"CVE-2019-1547");

  script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"false");

  script_set_attribute(attribute:"vuln_publication_date", value:"2019/07/30");
  script_set_attribute(attribute:"patch_publication_date", value:"2019/09/19");
  script_set_attribute(attribute:"plugin_publication_date", value:"2021/06/10");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libopenssl0_9_8");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libopenssl0_9_8-32bit");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libopenssl0_9_8-hmac");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libopenssl0_9_8-hmac-32bit");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:openssl");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:openssl-doc");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:11");
  script_set_attribute(attribute:"stig_severity", value:"I");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_family(english:"SuSE Local Security Checks");

  script_copyright(english:"This script is Copyright (C) 2021-2022 and is owned by Tenable, Inc. or an Affiliate thereof.");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");

  exit(0);
}


include('audit.inc');
include('global_settings.inc');
include('misc_func.inc');
include('rpm.inc');

if (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/SuSE/release");
if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'SUSE');
os_ver = os_ver[1];
if (! preg(pattern:"^(SLES11)$", string:os_ver)) audit(AUDIT_OS_NOT, 'SUSE SLES11', 'SUSE ' + os_ver);

if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item('Host/cpu');
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if ('x86_64' >!< cpu && cpu !~ "^i[3-6]86$" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'SUSE ' + os_ver, cpu);

sp = get_kb_item("Host/SuSE/patchlevel");
if (isnull(sp)) sp = "0";
if (os_ver == "SLES11" && (! preg(pattern:"^(4)$", string:sp))) audit(AUDIT_OS_NOT, "SLES11 SP4", os_ver + " SP" + sp);

pkgs = [
    {'reference':'libopenssl0_9_8-0.9.8j-0.106.25', 'sp':'4', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},
    {'reference':'libopenssl0_9_8-32bit-0.9.8j-0.106.25', 'sp':'4', 'cpu':'s390x', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},
    {'reference':'libopenssl0_9_8-32bit-0.9.8j-0.106.25', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},
    {'reference':'libopenssl0_9_8-hmac-0.9.8j-0.106.25', 'sp':'4', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},
    {'reference':'libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.25', 'sp':'4', 'cpu':'s390x', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},
    {'reference':'libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.25', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},
    {'reference':'openssl-0.9.8j-0.106.25', 'sp':'4', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},
    {'reference':'openssl-doc-0.9.8j-0.106.25', 'sp':'4', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'SLES_SAP-release-11.4'},
    {'reference':'libopenssl0_9_8-0.9.8j-0.106.25', 'sp':'4', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},
    {'reference':'libopenssl0_9_8-32bit-0.9.8j-0.106.25', 'sp':'4', 'cpu':'s390x', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},
    {'reference':'libopenssl0_9_8-32bit-0.9.8j-0.106.25', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},
    {'reference':'libopenssl0_9_8-hmac-0.9.8j-0.106.25', 'sp':'4', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},
    {'reference':'libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.25', 'sp':'4', 'cpu':'s390x', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},
    {'reference':'libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.25', 'sp':'4', 'cpu':'x86_64', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},
    {'reference':'openssl-0.9.8j-0.106.25', 'sp':'4', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'},
    {'reference':'openssl-doc-0.9.8j-0.106.25', 'sp':'4', 'release':'SLES11', 'rpm_spec_vers_cmp':TRUE, 'exists_check':'sles-release-11.4'}
];

flag = 0;
foreach package_array ( pkgs ) {
  reference = NULL;
  release = NULL;
  sp = NULL;
  cpu = NULL;
  exists_check = NULL;
  rpm_spec_vers_cmp = NULL;
  if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];
  if (!empty_or_null(package_array['release'])) release = package_array['release'];
  if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];
  if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];
  if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];
  if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];
  if (reference && release && exists_check) {
    if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;
  }
  else if (reference && release) {
    if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;
  }
}

if (flag)
{
  ltss_plugin_caveat = '\n' +
    'NOTE: This vulnerability check contains fixes that apply to\n' +
    'packages only available in SUSE Enterprise Linux Server LTSS\n' +
    'repositories. Access to these package security updates require\n' +
    'a paid SUSE LTSS subscription.\n';
  security_report_v4(
      port       : 0,
      severity   : SECURITY_WARNING,
      extra      : rpm_report_get() + ltss_plugin_caveat
  );
  exit(0);
}
else
{
  tested = pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'libopenssl0_9_8 / libopenssl0_9_8-32bit / libopenssl0_9_8-hmac / etc');
}
VendorProductVersionCPE
novellsuse_linuxlibopenssl0_9_8p-cpe:/a:novell:suse_linux:libopenssl0_9_8
novellsuse_linuxlibopenssl0_9_8-32bitp-cpe:/a:novell:suse_linux:libopenssl0_9_8-32bit
novellsuse_linuxlibopenssl0_9_8-hmacp-cpe:/a:novell:suse_linux:libopenssl0_9_8-hmac
novellsuse_linuxlibopenssl0_9_8-hmac-32bitp-cpe:/a:novell:suse_linux:libopenssl0_9_8-hmac-32bit
novellsuse_linuxopensslp-cpe:/a:novell:suse_linux:openssl
novellsuse_linuxopenssl-docp-cpe:/a:novell:suse_linux:openssl-doc
novellsuse_linux11cpe:/o:novell:suse_linux:11