An update for kernel is now available for Red Hat Enterprise Linux 7.3 Advanced Update Support, Red Hat Enterprise Linux 7.3 Telco Extended Update Support, and Red Hat Enterprise Linux 7.3 Update Services for SAP Solutions.
Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.
The kernel packages contain the Linux kernel, the core of any Linux operating system.
Security Fix(es) :
* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)
* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)
* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.
Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)
* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.
(CVE-2019-11091)
For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.
Bug Fix(es) :
* rwsem in inconsistent state leading system to hung (BZ#1690320)
* iscsi driver can block reboot/shutdown (BZ#1693340)
* ovl_create can return positive retval and crash the host (BZ#1696289)
{"id": "REDHAT-RHSA-2019-1171.NASL", "vendorId": null, "type": "nessus", "bulletinFamily": "scanner", "title": "RHEL 7 : kernel (RHSA-2019:1171) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "description": "An update for kernel is now available for Red Hat Enterprise Linux 7.3 Advanced Update Support, Red Hat Enterprise Linux 7.3 Telco Extended Update Support, and Red Hat Enterprise Linux 7.3 Update Services for SAP Solutions.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* rwsem in inconsistent state leading system to hung (BZ#1690320)\n\n* iscsi driver can block reboot/shutdown (BZ#1693340)\n\n* ovl_create can return positive retval and crash the host (BZ#1696289)", "published": "2019-05-15T00:00:00", "modified": "2020-01-17T00:00:00", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}, "cvss2": {}, "cvss3": {}, "href": "https://www.tenable.com/plugins/nessus/125117", "reporter": "This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.", "references": ["https://access.redhat.com/errata/RHSA-2019:1171", "https://access.redhat.com/security/vulnerabilities/mds", "https://access.redhat.com/security/cve/cve-2018-12127", "http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-12126", "http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-12127", "https://access.redhat.com/security/cve/cve-2018-12130", "https://access.redhat.com/security/cve/cve-2019-11091", "https://access.redhat.com/security/cve/cve-2018-12126", "http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-11091", "http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-12130"], "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "immutableFields": [], "lastseen": "2022-02-28T13:16:11", "viewCount": 18, "enchantments": {"dependencies": {"references": [{"type": "amazon", "idList": ["ALAS-2019-1205", "ALAS-2019-1260", "ALAS2-2019-1205", "ALAS2-2019-1274"]}, {"type": "apple", "idList": ["APPLE:F140693073F19FD842C6915DBBBD6D8D", "APPLE:HT210119"]}, {"type": "centos", "idList": ["CESA-2019:1168", "CESA-2019:1169", "CESA-2019:1177", "CESA-2019:1178", "CESA-2019:1180", "CESA-2019:1181"]}, {"type": "checkpoint_security", "idList": ["CPS:SK153672"]}, {"type": "citrix", "idList": ["CTX251995"]}, {"type": "cloudfoundry", "idList": ["CFOUNDRY:02669B806A06D41B24DA398CE2D4EEFD", "CFOUNDRY:87EED6F38C9114A077795F94CEE1CCD3", "CFOUNDRY:B2E69F41B4038981C401E61FA93A1C88", "CFOUNDRY:B35B43834E131FD9F0A2BB00D581980F", "CFOUNDRY:E69484607521DCF7CA9844727923D7C3"]}, {"type": "cve", "idList": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"]}, {"type": "debian", "idList": ["DEBIAN:DLA-1787-1:EA5F1", "DEBIAN:DLA-1789-1:151C5", "DEBIAN:DLA-1789-1:B54BD", "DEBIAN:DLA-1789-2:33DD5", "DEBIAN:DLA-1789-2:82C69", "DEBIAN:DLA-1799-1:F9D71", "DEBIAN:DLA-1799-2:074DF", "DEBIAN:DLA-1989-1:8096A", "DEBIAN:DLA-1990-1:DF706", "DEBIAN:DSA-4444-1:2DFF1", "DEBIAN:DSA-4444-1:9F738", "DEBIAN:DSA-4447-1:76E6B", "DEBIAN:DSA-4447-2:8C972", "DEBIAN:DSA-4469-1:052EF", "DEBIAN:DSA-4469-1:B9B08", "DEBIAN:DSA-4564-1:E0777", "DEBIAN:DSA-4564-1:F8764", "DEBIAN:DSA-4602-1:C29F7"]}, {"type": "debiancve", "idList": ["DEBIANCVE:CVE-2018-12126", "DEBIANCVE:CVE-2018-12127", "DEBIANCVE:CVE-2018-12130", "DEBIANCVE:CVE-2019-11091"]}, {"type": "f5", "idList": ["F5:K34303485", "F5:K41283800", "F5:K52370164", "F5:K80159635", "F5:K97035296"]}, {"type": "fedora", "idList": ["FEDORA:041196190421", "FEDORA:04868606351B", "FEDORA:07B5A6CB4421", "FEDORA:18B6A601B8F9", "FEDORA:1BD5B6389B47", "FEDORA:1CAC0608E6F2", "FEDORA:2836F613193B", "FEDORA:2A66C608E6F2", "FEDORA:308A766A87C1", "FEDORA:344346042F3E", "FEDORA:3A3766C5B5A2", "FEDORA:3A69E60B3E88", "FEDORA:3C394606D98F", "FEDORA:4002B609954A", "FEDORA:4852F614170A", "FEDORA:4CEF5610D7CA", "FEDORA:4F21B6125E50", "FEDORA:501B260EC97D", "FEDORA:511986124F82", "FEDORA:511A7608E6E1", "FEDORA:59E3F606D998", "FEDORA:5A4D662AE22C", "FEDORA:5BC786077CC2", "FEDORA:5EFCA61845B3", "FEDORA:609B763560C6", "FEDORA:690DE6022BA8", "FEDORA:69C3B608C005", "FEDORA:6D8F5627F513", "FEDORA:6E67663233DB", "FEDORA:754F860A98ED", "FEDORA:761BC607A42A", "FEDORA:79EAC605FC25", "FEDORA:830BA60779B9", "FEDORA:84FBF6179A05", "FEDORA:89A31604C861", "FEDORA:9801060D30FA", "FEDORA:9833860D22D9", "FEDORA:98E8F6079A11", "FEDORA:A2DF86040BC0", "FEDORA:B550461845B3", "FEDORA:B92AD601D827", "FEDORA:BED2C6068713", "FEDORA:BF5EC607125E", "FEDORA:C1EA6603ECEC", "FEDORA:C4D496071279", "FEDORA:C63426076F58", "FEDORA:C63656040AE1", "FEDORA:C6AF860C4240", "FEDORA:C7391611860D", "FEDORA:CB0956087865", "FEDORA:CF8DE6049C48", "FEDORA:CFE4360D22F6", "FEDORA:D3523607924A", "FEDORA:D7636602D4CE", "FEDORA:E197860874D7", "FEDORA:E51F7608C00A", "FEDORA:E8B02603B289", "FEDORA:F02C560914F4"]}, {"type": "fortinet", "idList": ["FG-IR-18-002"]}, {"type": "freebsd", "idList": ["FBE10A8A-05A1-11EA-9DFA-F8B156AC3FF9"]}, {"type": "gentoo", "idList": ["GLSA-202003-56"]}, {"type": "hp", "idList": ["HP:C06330149"]}, {"type": "huawei", "idList": ["HUAWEI-SA-20190712-01-MDS"]}, {"type": "ibm", "idList": ["174F1CB3220ED56F318FA688B5104CC5CCC2107DBECA87BE989ABF3A0091E073", "2E35A265F27550123D199561F8EB9CB2D05496361A506317C988178A814DD830", "DADDA62063608FC2364C45946E4B2DDE8A6F07470DAE7748E22A1AD6361417F7", "F36AE3BB852505D936A490EDD4C0C7C5C3262303BF37606258BF8F8355BABF19"]}, {"type": "intel", "idList": ["INTEL:INTEL-SA-00233"]}, {"type": "lenovo", "idList": ["LENOVO:PS500247-MICROARCHITECTURAL-DATA-SAMPLING-MDS-SIDE-CHANNEL-VULNERABILITIES-NOSID", "LENOVO:PS500247-NOSID"]}, {"type": "mageia", "idList": ["MGASA-2019-0171", "MGASA-2019-0172", "MGASA-2019-0173", "MGASA-2019-0174", "MGASA-2019-0179"]}, {"type": "mscve", "idList": ["MS:ADV190013"]}, {"type": "mskb", "idList": ["KB4073065", "KB4494440", "KB4494441", "KB4497936", "KB4499151", "KB4499154", "KB4499158", "KB4499164", "KB4499165", "KB4499167", "KB4499171", "KB4499175", "KB4499179", "KB4499181", "KB4503273", "KB4503287", "KB4512578", "KB4515384", "KB4516026", "KB4516033", "KB4516044", "KB4516051", "KB4516055", "KB4516058", "KB4516062", "KB4516064", "KB4516065", "KB4516066", "KB4516067", "KB4516068", "KB4520011"]}, {"type": "myhack58", "idList": ["MYHACK58:62201994150", "MYHACK58:62201994183"]}, {"type": "nessus", "idList": ["AL2_ALAS-2019-1205.NASL", "AL2_ALAS-2019-1274.NASL", "ALA_ALAS-2019-1205.NASL", "ALA_ALAS-2019-1260.NASL", "CENTOS8_RHSA-2019-1167.NASL", "CENTOS8_RHSA-2019-1175.NASL", "CENTOS_RHSA-2019-1168.NASL", "CENTOS_RHSA-2019-1169.NASL", "CENTOS_RHSA-2019-1177.NASL", "CENTOS_RHSA-2019-1178.NASL", "CENTOS_RHSA-2019-1180.NASL", "CENTOS_RHSA-2019-1181.NASL", "CITRIX_XENSERVER_CTX251995.NASL", "DEBIAN_DLA-1787.NASL", "DEBIAN_DLA-1789.NASL", "DEBIAN_DLA-1799.NASL", "DEBIAN_DLA-1989.NASL", "DEBIAN_DLA-1990.NASL", "DEBIAN_DSA-4444.NASL", "DEBIAN_DSA-4447.NASL", "DEBIAN_DSA-4469.NASL", "DEBIAN_DSA-4564.NASL", "DEBIAN_DSA-4602.NASL", "EULEROS_SA-2019-1586.NASL", "EULEROS_SA-2019-1587.NASL", "EULEROS_SA-2019-1588.NASL", "EULEROS_SA-2019-1611.NASL", "EULEROS_SA-2019-1612.NASL", "EULEROS_SA-2019-2210.NASL", "EULEROS_SA-2019-2227.NASL", "EULEROS_SA-2019-2289.NASL", "EULEROS_SA-2019-2300.NASL", "EULEROS_SA-2019-2431.NASL", "EULEROS_SA-2019-2468.NASL", "FEDORA_2019-0332A96D31.NASL", "FEDORA_2019-1F5832FC0E.NASL", "FEDORA_2019-640F8D8DD1.NASL", "FEDORA_2019-6458474BF2.NASL", "FEDORA_2019-6E146A714C.NASL", "FEDORA_2019-C36AFA818C.NASL", "FEDORA_2019-E6BF55E821.NASL", "FEDORA_2019-F910D35647.NASL", "FREEBSD_PKG_FBE10A8A05A111EA9DFAF8B156AC3FF9.NASL", "GENTOO_GLSA-202003-56.NASL", "MDS_KERNEL_REPORTING_LINUX.NASL", "MICROSOFT_WINDOWS_SPEC_EXECUTION.NBIN", "NEWSTART_CGSL_NS-SA-2019-0078_KERNEL.NASL", "NEWSTART_CGSL_NS-SA-2019-0085_KERNEL.NASL", "NEWSTART_CGSL_NS-SA-2019-0086_KERNEL-RT.NASL", "NEWSTART_CGSL_NS-SA-2019-0089_LIBVIRT.NASL", "NEWSTART_CGSL_NS-SA-2019-0091_QEMU-KVM.NASL", "NEWSTART_CGSL_NS-SA-2019-0092_KERNEL.NASL", "NEWSTART_CGSL_NS-SA-2019-0152_KERNEL.NASL", "NEWSTART_CGSL_NS-SA-2019-0152_LIBVIRT.NASL", "NEWSTART_CGSL_NS-SA-2019-0154_QEMU-KVM.NASL", "NEWSTART_CGSL_NS-SA-2019-0165_KERNEL-RT.NASL", "NEWSTART_CGSL_NS-SA-2019-0222_KERNEL-RT.NASL", "OPENSUSE-2019-1402.NASL", "OPENSUSE-2019-1403.NASL", "OPENSUSE-2019-1404.NASL", "OPENSUSE-2019-1405.NASL", "OPENSUSE-2019-1407.NASL", "OPENSUSE-2019-1408.NASL", "OPENSUSE-2019-1419.NASL", "OPENSUSE-2019-1420.NASL", "OPENSUSE-2019-1468.NASL", "OPENSUSE-2019-1505.NASL", "OPENSUSE-2019-1805.NASL", "OPENSUSE-2019-1806.NASL", "ORACLELINUX_ELSA-2019-1167.NASL", "ORACLELINUX_ELSA-2019-1168.NASL", "ORACLELINUX_ELSA-2019-1169.NASL", "ORACLELINUX_ELSA-2019-1175.NASL", "ORACLELINUX_ELSA-2019-1177.NASL", "ORACLELINUX_ELSA-2019-1178.NASL", "ORACLELINUX_ELSA-2019-1180.NASL", "ORACLELINUX_ELSA-2019-1181.NASL", "ORACLELINUX_ELSA-2019-4628.NASL", "ORACLELINUX_ELSA-2019-4629.NASL", "ORACLELINUX_ELSA-2019-4636.NASL", "ORACLELINUX_ELSA-2019-4637.NASL", "ORACLELINUX_ELSA-2019-4643.NASL", "ORACLELINUX_ELSA-2019-4669.NASL", "ORACLELINUX_ELSA-2019-4672.NASL", "ORACLELINUX_ELSA-2019-4675.NASL", "ORACLELINUX_ELSA-2019-4713.NASL", "ORACLELINUX_ELSA-2019-4714.NASL", "ORACLEVM_OVMSA-2019-0016.NASL", "ORACLEVM_OVMSA-2019-0018.NASL", "ORACLEVM_OVMSA-2019-0023.NASL", "ORACLEVM_OVMSA-2020-0039.NASL", "RANCHEROS_1_5_2.NASL", "REDHAT-RHSA-2019-1155.NASL", "REDHAT-RHSA-2019-1167.NASL", "REDHAT-RHSA-2019-1168.NASL", "REDHAT-RHSA-2019-1169.NASL", "REDHAT-RHSA-2019-1170.NASL", "REDHAT-RHSA-2019-1172.NASL", "REDHAT-RHSA-2019-1174.NASL", "REDHAT-RHSA-2019-1175.NASL", "REDHAT-RHSA-2019-1176.NASL", "REDHAT-RHSA-2019-1177.NASL", "REDHAT-RHSA-2019-1178.NASL", "REDHAT-RHSA-2019-1179.NASL", "REDHAT-RHSA-2019-1180.NASL", "REDHAT-RHSA-2019-1181.NASL", "REDHAT-RHSA-2019-1182.NASL", "REDHAT-RHSA-2019-1183.NASL", "REDHAT-RHSA-2019-1184.NASL", "REDHAT-RHSA-2019-1185.NASL", "REDHAT-RHSA-2019-1186.NASL", "REDHAT-RHSA-2019-1187.NASL", "REDHAT-RHSA-2019-1188.NASL", "REDHAT-RHSA-2019-1189.NASL", "REDHAT-RHSA-2019-1190.NASL", "REDHAT-RHSA-2019-1193.NASL", "REDHAT-RHSA-2019-1194.NASL", "REDHAT-RHSA-2019-1195.NASL", "REDHAT-RHSA-2019-1196.NASL", "REDHAT-RHSA-2019-1197.NASL", "REDHAT-RHSA-2019-1198.NASL", "REDHAT-RHSA-2019-1203.NASL", "REDHAT-RHSA-2019-1204.NASL", "REDHAT-RHSA-2019-1205.NASL", "REDHAT-RHSA-2019-1206.NASL", "REDHAT-RHSA-2019-1207.NASL", "REDHAT-RHSA-2019-1208.NASL", "REDHAT-RHSA-2019-1209.NASL", "REDHAT-RHSA-2019-1455.NASL", "REDHAT-RHSA-2019-2553.NASL", "SL_20190514_KERNEL_ON_SL6_X.NASL", "SL_20190514_KERNEL_ON_SL7_X.NASL", "SL_20190514_LIBVIRT_ON_SL6_X.NASL", "SL_20190514_LIBVIRT_ON_SL7_X.NASL", "SL_20190514_QEMU_KVM_ON_SL6_X.NASL", "SL_20190514_QEMU_KVM_ON_SL7_X.NASL", "SMB_NT_MS19_MAY_4494440.NASL", "SMB_NT_MS19_MAY_4494441.NASL", "SMB_NT_MS19_MAY_4499151.NASL", "SMB_NT_MS19_MAY_4499154.NASL", "SMB_NT_MS19_MAY_4499164.NASL", "SMB_NT_MS19_MAY_4499167.NASL", "SMB_NT_MS19_MAY_4499171.NASL", "SMB_NT_MS19_MAY_4499179.NASL", "SMB_NT_MS19_MAY_4499181.NASL", "SMB_NT_MS19_MAY_MICROCODE.NASL", "SMB_NT_MS20_NOV_OOB_MICROCODE.NASL", "SUSE_SU-2019-1236-1.NASL", "SUSE_SU-2019-1242-1.NASL", "SUSE_SU-2019-1248-1.NASL", "SUSE_SU-2019-1268-1.NASL", "SUSE_SU-2019-1269-1.NASL", "SUSE_SU-2019-1272-1.NASL", "SUSE_SU-2019-1287-1.NASL", "SUSE_SU-2019-1289-1.NASL", "SUSE_SU-2019-1296-1.NASL", "SUSE_SU-2019-1313-1.NASL", "SUSE_SU-2019-1347-1.NASL", "SUSE_SU-2019-1348-1.NASL", "SUSE_SU-2019-1349-1.NASL", "SUSE_SU-2019-1356-1.NASL", "SUSE_SU-2019-1371-1.NASL", "SUSE_SU-2019-14048-1.NASL", "SUSE_SU-2019-14051-1.NASL", "SUSE_SU-2019-14052-1.NASL", "SUSE_SU-2019-14063-1.NASL", "SUSE_SU-2019-14133-1.NASL", "SUSE_SU-2019-1423-1.NASL", "SUSE_SU-2019-1438-1.NASL", "SUSE_SU-2019-1452-1.NASL", "SUSE_SU-2019-1490-1.NASL", "SUSE_SU-2019-1547-1.NASL", "SUSE_SU-2019-1550-1.NASL", "SUSE_SU-2019-1909-1.NASL", "SUSE_SU-2019-1910-1.NASL", "SUSE_SU-2019-1954-1.NASL", "SUSE_SU-2019-2430-1.NASL", "SUSE_SU-2019-2753-1.NASL", "SUSE_SU-2019-2769-1.NASL", "SUSE_SU-2020-1275-1.NASL", "UBUNTU_USN-3977-1.NASL", "UBUNTU_USN-3977-2.NASL", "UBUNTU_USN-3977-3.NASL", "UBUNTU_USN-3978-1.NASL", "UBUNTU_USN-3979-1.NASL", "UBUNTU_USN-3980-1.NASL", "UBUNTU_USN-3980-2.NASL", "UBUNTU_USN-3981-1.NASL", "UBUNTU_USN-3981-2.NASL", "UBUNTU_USN-3982-1.NASL", "UBUNTU_USN-3982-2.NASL", "UBUNTU_USN-3983-1.NASL", "UBUNTU_USN-3985-1.NASL", "UBUNTU_USN-3985-2.NASL", "VIRTUOZZO_VZA-2019-037.NASL", "VIRTUOZZO_VZLSA-2019-1180.NASL", "VIRTUOZZO_VZLSA-2019-1181.NASL", "VMWARE_ESXI_VMSA-2019-0008.NASL", "VMWARE_VMSA-2019-0008.NASL", "XEN_SERVER_XSA-297.NASL"]}, {"type": "openvas", "idList": ["OPENVAS:1361412562310108766", "OPENVAS:1361412562310108767", "OPENVAS:1361412562310704444", "OPENVAS:1361412562310704447", "OPENVAS:1361412562310704469", "OPENVAS:1361412562310704564", "OPENVAS:1361412562310704602", "OPENVAS:1361412562310814887", "OPENVAS:1361412562310815045", "OPENVAS:1361412562310815046", "OPENVAS:1361412562310815047", "OPENVAS:1361412562310815048", "OPENVAS:1361412562310815049", "OPENVAS:1361412562310815050", "OPENVAS:1361412562310815051", "OPENVAS:1361412562310815052", "OPENVAS:1361412562310815453", "OPENVAS:1361412562310815454", "OPENVAS:1361412562310815455", "OPENVAS:1361412562310815456", "OPENVAS:1361412562310815457", "OPENVAS:1361412562310815459", "OPENVAS:1361412562310815461", "OPENVAS:1361412562310815462", "OPENVAS:1361412562310815463", "OPENVAS:1361412562310815486", "OPENVAS:1361412562310844004", "OPENVAS:1361412562310844006", "OPENVAS:1361412562310844007", "OPENVAS:1361412562310844008", "OPENVAS:1361412562310844009", "OPENVAS:1361412562310844010", "OPENVAS:1361412562310844011", "OPENVAS:1361412562310844012", "OPENVAS:1361412562310844013", "OPENVAS:1361412562310844021", "OPENVAS:1361412562310844061", "OPENVAS:1361412562310852502", "OPENVAS:1361412562310852503", "OPENVAS:1361412562310852504", "OPENVAS:1361412562310852505", "OPENVAS:1361412562310852506", "OPENVAS:1361412562310852507", "OPENVAS:1361412562310852508", "OPENVAS:1361412562310852509", "OPENVAS:1361412562310852523", "OPENVAS:1361412562310852535", "OPENVAS:1361412562310852638", "OPENVAS:1361412562310852940", "OPENVAS:1361412562310876360", "OPENVAS:1361412562310876361", "OPENVAS:1361412562310876363", "OPENVAS:1361412562310876365", "OPENVAS:1361412562310876368", "OPENVAS:1361412562310876374", "OPENVAS:1361412562310876375", "OPENVAS:1361412562310876377", "OPENVAS:1361412562310876381", "OPENVAS:1361412562310876383", "OPENVAS:1361412562310876385", "OPENVAS:1361412562310876390", "OPENVAS:1361412562310876392", "OPENVAS:1361412562310876399", "OPENVAS:1361412562310876422", "OPENVAS:1361412562310876423", "OPENVAS:1361412562310876441", "OPENVAS:1361412562310876445", "OPENVAS:1361412562310876476", "OPENVAS:1361412562310876479", "OPENVAS:1361412562310876489", "OPENVAS:1361412562310876510", "OPENVAS:1361412562310876515", "OPENVAS:1361412562310876543", "OPENVAS:1361412562310876550", "OPENVAS:1361412562310876553", "OPENVAS:1361412562310876555", "OPENVAS:1361412562310876563", "OPENVAS:1361412562310876564", "OPENVAS:1361412562310876565", "OPENVAS:1361412562310876567", "OPENVAS:1361412562310876586", "OPENVAS:1361412562310876611", "OPENVAS:1361412562310876621", "OPENVAS:1361412562310876638", "OPENVAS:1361412562310876653", "OPENVAS:1361412562310876666", "OPENVAS:1361412562310876750", "OPENVAS:1361412562310876753", "OPENVAS:1361412562310876809", "OPENVAS:1361412562310876841", "OPENVAS:1361412562310876869", "OPENVAS:1361412562310876925", "OPENVAS:1361412562310876943", "OPENVAS:1361412562310876995", "OPENVAS:1361412562310876999", "OPENVAS:1361412562310877008", "OPENVAS:1361412562310877045", "OPENVAS:1361412562310877052", "OPENVAS:1361412562310877058", "OPENVAS:1361412562310877070", "OPENVAS:1361412562310877081", "OPENVAS:1361412562310877102", "OPENVAS:1361412562310877370", "OPENVAS:1361412562310877407", "OPENVAS:1361412562310877476", "OPENVAS:1361412562310877540", "OPENVAS:1361412562310883051", "OPENVAS:1361412562310883052", "OPENVAS:1361412562310883053", "OPENVAS:1361412562310883054", "OPENVAS:1361412562310883055", "OPENVAS:1361412562310883056", "OPENVAS:1361412562310891787", "OPENVAS:1361412562310891789", "OPENVAS:1361412562310891799", "OPENVAS:1361412562310891989", "OPENVAS:1361412562310891990", "OPENVAS:1361412562311220191586", "OPENVAS:1361412562311220191587", "OPENVAS:1361412562311220191588", "OPENVAS:1361412562311220191611", "OPENVAS:1361412562311220191612", "OPENVAS:1361412562311220192210", "OPENVAS:1361412562311220192227", "OPENVAS:1361412562311220192289", "OPENVAS:1361412562311220192300", "OPENVAS:1361412562311220192431", "OPENVAS:1361412562311220192468"]}, {"type": "oraclelinux", "idList": ["ELSA-2019-1167", "ELSA-2019-1168", "ELSA-2019-1169", "ELSA-2019-1175", "ELSA-2019-1177", "ELSA-2019-1178", "ELSA-2019-1180", "ELSA-2019-1181", "ELSA-2019-1268", "ELSA-2019-1479", "ELSA-2019-1488", "ELSA-2019-1580", "ELSA-2019-2029", "ELSA-2019-2078", "ELSA-2019-2294", "ELSA-2019-2703", "ELSA-2019-4628", "ELSA-2019-4629", "ELSA-2019-4630", "ELSA-2019-4636", "ELSA-2019-4637", "ELSA-2019-4640", "ELSA-2019-4643", "ELSA-2019-4669", "ELSA-2019-4672", "ELSA-2019-4675", "ELSA-2019-4702", "ELSA-2019-4713", "ELSA-2019-4714", "ELSA-2019-4732", "ELSA-2020-0279", "ELSA-2021-9034"]}, {"type": "osv", "idList": ["OSV:DLA-1787-1", "OSV:DLA-1789-1", "OSV:DLA-1789-2", "OSV:DLA-1799-1", "OSV:DLA-1989-1", "OSV:DLA-1990-1", "OSV:DSA-4444-1", "OSV:DSA-4447-1", "OSV:DSA-4469-1", "OSV:DSA-4564-1"]}, {"type": "paloalto", "idList": ["PAN-SA-2019-0012"]}, {"type": "photon", "idList": ["PHSA-2019-0161", "PHSA-2019-0236", "PHSA-2019-1.0-0236", "PHSA-2019-2.0-0161"]}, {"type": "qualysblog", "idList": ["QUALYSBLOG:9BA334FCEF38374A0B09A0614B2D74D4", "QUALYSBLOG:FBDC4B445E6B33502BA1650A8BD4A6E1"]}, {"type": "redhat", "idList": ["RHSA-2019:1155", "RHSA-2019:1167", "RHSA-2019:1168", "RHSA-2019:1169", "RHSA-2019:1170", "RHSA-2019:1171", "RHSA-2019:1172", "RHSA-2019:1174", "RHSA-2019:1175", "RHSA-2019:1176", "RHSA-2019:1177", "RHSA-2019:1178", "RHSA-2019:1179", "RHSA-2019:1180", "RHSA-2019:1181", "RHSA-2019:1182", "RHSA-2019:1183", "RHSA-2019:1184", "RHSA-2019:1185", "RHSA-2019:1186", "RHSA-2019:1187", "RHSA-2019:1188", "RHSA-2019:1189", "RHSA-2019:1190", "RHSA-2019:1193", "RHSA-2019:1194", "RHSA-2019:1195", "RHSA-2019:1196", "RHSA-2019:1197", "RHSA-2019:1198", "RHSA-2019:1199", "RHSA-2019:1200", "RHSA-2019:1201", "RHSA-2019:1202", "RHSA-2019:1203", "RHSA-2019:1204", "RHSA-2019:1205", "RHSA-2019:1206", "RHSA-2019:1207", "RHSA-2019:1208", "RHSA-2019:1209", "RHSA-2019:1455", "RHSA-2019:2553"]}, {"type": "redhatcve", "idList": ["RH:CVE-2018-12126", "RH:CVE-2018-12127", "RH:CVE-2018-12130", "RH:CVE-2019-11091"]}, {"type": "suse", "idList": ["OPENSUSE-SU-2019:1402-1", "OPENSUSE-SU-2019:1403-1", "OPENSUSE-SU-2019:1404-1", "OPENSUSE-SU-2019:1405-1", "OPENSUSE-SU-2019:1407-1", "OPENSUSE-SU-2019:1408-1", "OPENSUSE-SU-2019:1419-1", "OPENSUSE-SU-2019:1420-1", "OPENSUSE-SU-2019:1468-1", "OPENSUSE-SU-2019:1505-1", "OPENSUSE-SU-2019:1805-1", "OPENSUSE-SU-2019:1806-1"]}, {"type": "thn", "idList": ["THN:ABCC9DD36D10CA51E767D6104EF69F5C"]}, {"type": "threatpost", "idList": ["THREATPOST:6D16350D7053F9F2166165E3E33239B9", "THREATPOST:B43D65BEF15E504CF4DFB8EB516972D7", "THREATPOST:CBFAA2319AF4281EC1DD5C4682601942"]}, {"type": "ubuntu", "idList": ["USN-3977-1", "USN-3977-2", "USN-3977-3", "USN-3978-1", "USN-3979-1", "USN-3980-1", "USN-3980-2", "USN-3981-1", "USN-3981-2", "USN-3982-1", "USN-3982-2", "USN-3983-1", "USN-3983-2", "USN-3984-1", "USN-3985-1", "USN-3985-2"]}, {"type": "ubuntucve", "idList": ["UB:CVE-2018-12126", "UB:CVE-2018-12127", "UB:CVE-2018-12130", "UB:CVE-2019-11091"]}, {"type": "virtuozzo", "idList": ["VZA-2019-036", "VZA-2019-037"]}, {"type": "vmware", "idList": ["VMSA-2019-0008", "VMSA-2019-0008.2"]}, {"type": "xen", "idList": ["XSA-297"]}]}, "score": {"value": -0.2, "vector": "NONE"}, "backreferences": {"references": [{"type": "amazon", "idList": ["ALAS-2019-1205"]}, {"type": "apple", "idList": ["APPLE:F140693073F19FD842C6915DBBBD6D8D", "APPLE:HT210119"]}, {"type": "centos", "idList": ["CESA-2019:1168", "CESA-2019:1169", "CESA-2019:1177", "CESA-2019:1178", "CESA-2019:1180", "CESA-2019:1181"]}, {"type": "checkpoint_security", "idList": ["CPS:SK153672"]}, {"type": "citrix", "idList": ["CTX251995"]}, {"type": "cloudfoundry", "idList": ["CFOUNDRY:02669B806A06D41B24DA398CE2D4EEFD", "CFOUNDRY:87EED6F38C9114A077795F94CEE1CCD3", "CFOUNDRY:B2E69F41B4038981C401E61FA93A1C88", "CFOUNDRY:B35B43834E131FD9F0A2BB00D581980F", "CFOUNDRY:E69484607521DCF7CA9844727923D7C3"]}, {"type": "cve", "idList": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"]}, {"type": "debian", "idList": ["DEBIAN:DLA-1787-1:EA5F1", "DEBIAN:DLA-1789-1:B54BD", "DEBIAN:DLA-1789-2:82C69", "DEBIAN:DLA-1799-1:F9D71", "DEBIAN:DLA-1799-2:074DF", "DEBIAN:DLA-1989-1:8096A", "DEBIAN:DLA-1990-1:DF706", "DEBIAN:DSA-4444-1:2DFF1", "DEBIAN:DSA-4447-1:76E6B", "DEBIAN:DSA-4447-2:8C972", "DEBIAN:DSA-4469-1:B9B08", "DEBIAN:DSA-4564-1:E0777"]}, {"type": "debiancve", "idList": ["DEBIANCVE:CVE-2018-12126", "DEBIANCVE:CVE-2018-12127", "DEBIANCVE:CVE-2018-12130", "DEBIANCVE:CVE-2019-11091"]}, {"type": "f5", "idList": ["F5:K34303485", "F5:K41283800", "F5:K52370164", "F5:K80159635", "F5:K97035296"]}, {"type": "fedora", "idList": ["FEDORA:041196190421", "FEDORA:04868606351B", "FEDORA:07B5A6CB4421", "FEDORA:18B6A601B8F9", "FEDORA:1BD5B6389B47", "FEDORA:1CAC0608E6F2", "FEDORA:2836F613193B", "FEDORA:2A66C608E6F2", "FEDORA:308A766A87C1", "FEDORA:344346042F3E", "FEDORA:3A3766C5B5A2", "FEDORA:3A69E60B3E88", "FEDORA:3C394606D98F", "FEDORA:4002B609954A", "FEDORA:4852F614170A", "FEDORA:4CEF5610D7CA", "FEDORA:4F21B6125E50", "FEDORA:501B260EC97D", "FEDORA:511986124F82", "FEDORA:511A7608E6E1", "FEDORA:59E3F606D998", "FEDORA:5A4D662AE22C", "FEDORA:5BC786077CC2", "FEDORA:5EFCA61845B3", "FEDORA:609B763560C6", "FEDORA:690DE6022BA8", "FEDORA:69C3B608C005", "FEDORA:6D8F5627F513", "FEDORA:6E67663233DB", "FEDORA:754F860A98ED", "FEDORA:761BC607A42A", "FEDORA:79EAC605FC25", "FEDORA:830BA60779B9", "FEDORA:84FBF6179A05", "FEDORA:89A31604C861", "FEDORA:9801060D30FA", "FEDORA:9833860D22D9", "FEDORA:98E8F6079A11", "FEDORA:A2DF86040BC0", "FEDORA:B550461845B3", "FEDORA:B92AD601D827", "FEDORA:BED2C6068713", "FEDORA:BF5EC607125E", "FEDORA:C1EA6603ECEC", "FEDORA:C4D496071279", "FEDORA:C63426076F58", "FEDORA:C63656040AE1", "FEDORA:C6AF860C4240", "FEDORA:C7391611860D", "FEDORA:CB0956087865", "FEDORA:CF8DE6049C48", "FEDORA:CFE4360D22F6", "FEDORA:D3523607924A", "FEDORA:D7636602D4CE", "FEDORA:E197860874D7", "FEDORA:E51F7608C00A", "FEDORA:E8B02603B289", "FEDORA:F02C560914F4"]}, {"type": "fortinet", "idList": ["FG-IR-18-002"]}, {"type": "freebsd", "idList": ["FBE10A8A-05A1-11EA-9DFA-F8B156AC3FF9"]}, {"type": "gentoo", "idList": ["GLSA-202003-56"]}, {"type": "hp", "idList": ["HP:C06330149"]}, {"type": "huawei", "idList": ["HUAWEI-SA-20190712-01-MDS"]}, {"type": "ibm", "idList": ["DADDA62063608FC2364C45946E4B2DDE8A6F07470DAE7748E22A1AD6361417F7"]}, {"type": "lenovo", "idList": ["LENOVO:PS500247-NOSID"]}, {"type": "metasploit", "idList": ["MSF:ILITIES/AMAZON-LINUX-AMI-2-CVE-2018-12126/", "MSF:ILITIES/AMAZON-LINUX-AMI-2-CVE-2018-12127/", "MSF:ILITIES/AMAZON-LINUX-AMI-2-CVE-2018-12130/", "MSF:ILITIES/GENTOO-LINUX-CVE-2018-12127/", "MSF:ILITIES/GENTOO-LINUX-CVE-2018-12130/", "MSF:ILITIES/HUAWEI-EULEROS-2_0_SP8-CVE-2018-12127/", "MSF:ILITIES/REDHAT-OPENSHIFT-CVE-2018-12127/"]}, {"type": "mscve", "idList": ["MS:ADV190013"]}, {"type": "mskb", "idList": ["KB4516064"]}, {"type": "myhack58", "idList": ["MYHACK58:62201994150", "MYHACK58:62201994183"]}, {"type": "nessus", "idList": ["AL2_ALAS-2019-1205.NASL", "AL2_ALAS-2019-1274.NASL", "ALA_ALAS-2019-1205.NASL", "ALA_ALAS-2019-1260.NASL", "CENTOS_RHSA-2019-1168.NASL", "CENTOS_RHSA-2019-1169.NASL", "CENTOS_RHSA-2019-1177.NASL", "CENTOS_RHSA-2019-1178.NASL", "CENTOS_RHSA-2019-1180.NASL", "CENTOS_RHSA-2019-1181.NASL", "CITRIX_XENSERVER_CTX251995.NASL", "DEBIAN_DLA-1787.NASL", "DEBIAN_DLA-1789.NASL", "DEBIAN_DLA-1799.NASL", "DEBIAN_DSA-4444.NASL", "DEBIAN_DSA-4447.NASL", "EULEROS_SA-2019-1586.NASL", "EULEROS_SA-2019-1587.NASL", "EULEROS_SA-2019-1588.NASL", "EULEROS_SA-2019-1611.NASL", "EULEROS_SA-2019-1612.NASL", "EULEROS_SA-2019-2210.NASL", "FEDORA_2019-0332A96D31.NASL", "FEDORA_2019-1F5832FC0E.NASL", "FEDORA_2019-640F8D8DD1.NASL", "FEDORA_2019-6458474BF2.NASL", "FEDORA_2019-6E146A714C.NASL", "FEDORA_2019-C36AFA818C.NASL", "FEDORA_2019-E6BF55E821.NASL", "FEDORA_2019-F910D35647.NASL", "FREEBSD_PKG_FBE10A8A05A111EA9DFAF8B156AC3FF9.NASL", "GENTOO_GLSA-202003-56.NASL", "MDS_KERNEL_REPORTING_LINUX.NASL", "NEWSTART_CGSL_NS-SA-2019-0078_KERNEL.NASL", "NEWSTART_CGSL_NS-SA-2019-0085_KERNEL.NASL", "NEWSTART_CGSL_NS-SA-2019-0086_KERNEL-RT.NASL", "NEWSTART_CGSL_NS-SA-2019-0089_LIBVIRT.NASL", "NEWSTART_CGSL_NS-SA-2019-0091_QEMU-KVM.NASL", "NEWSTART_CGSL_NS-SA-2019-0092_KERNEL.NASL", "NEWSTART_CGSL_NS-SA-2019-0152_LIBVIRT.NASL", "NEWSTART_CGSL_NS-SA-2019-0154_QEMU-KVM.NASL", "NEWSTART_CGSL_NS-SA-2019-0165_KERNEL-RT.NASL", "OPENSUSE-2019-1402.NASL", "OPENSUSE-2019-1403.NASL", "OPENSUSE-2019-1404.NASL", "OPENSUSE-2019-1405.NASL", "OPENSUSE-2019-1407.NASL", "OPENSUSE-2019-1408.NASL", "OPENSUSE-2019-1419.NASL", "OPENSUSE-2019-1420.NASL", "OPENSUSE-2019-1468.NASL", "OPENSUSE-2019-1505.NASL", "OPENSUSE-2019-1805.NASL", "OPENSUSE-2019-1806.NASL", "ORACLELINUX_ELSA-2019-1167.NASL", "ORACLELINUX_ELSA-2019-1168.NASL", "ORACLELINUX_ELSA-2019-1169.NASL", "ORACLELINUX_ELSA-2019-1175.NASL", "ORACLELINUX_ELSA-2019-1177.NASL", "ORACLELINUX_ELSA-2019-1178.NASL", "ORACLELINUX_ELSA-2019-1180.NASL", "ORACLELINUX_ELSA-2019-1181.NASL", "ORACLELINUX_ELSA-2019-4628.NASL", "ORACLELINUX_ELSA-2019-4629.NASL", "ORACLELINUX_ELSA-2019-4636.NASL", "ORACLELINUX_ELSA-2019-4637.NASL", "ORACLELINUX_ELSA-2019-4643.NASL", "ORACLELINUX_ELSA-2019-4669.NASL", "ORACLELINUX_ELSA-2019-4672.NASL", "ORACLELINUX_ELSA-2019-4675.NASL", "ORACLELINUX_ELSA-2019-4713.NASL", "ORACLELINUX_ELSA-2019-4714.NASL", "ORACLEVM_OVMSA-2019-0016.NASL", "ORACLEVM_OVMSA-2019-0018.NASL", "ORACLEVM_OVMSA-2019-0023.NASL", "REDHAT-RHSA-2019-1155.NASL", "REDHAT-RHSA-2019-1167.NASL", "REDHAT-RHSA-2019-1168.NASL", "REDHAT-RHSA-2019-1169.NASL", "REDHAT-RHSA-2019-1170.NASL", "REDHAT-RHSA-2019-1172.NASL", "REDHAT-RHSA-2019-1174.NASL", "REDHAT-RHSA-2019-1175.NASL", "REDHAT-RHSA-2019-1176.NASL", "REDHAT-RHSA-2019-1177.NASL", "REDHAT-RHSA-2019-1178.NASL", "REDHAT-RHSA-2019-1179.NASL", "REDHAT-RHSA-2019-1180.NASL", "REDHAT-RHSA-2019-1181.NASL", "REDHAT-RHSA-2019-1182.NASL", "REDHAT-RHSA-2019-1183.NASL", "REDHAT-RHSA-2019-1184.NASL", "REDHAT-RHSA-2019-1185.NASL", "REDHAT-RHSA-2019-1186.NASL", "REDHAT-RHSA-2019-1187.NASL", "REDHAT-RHSA-2019-1188.NASL", "REDHAT-RHSA-2019-1189.NASL", "REDHAT-RHSA-2019-1190.NASL", "REDHAT-RHSA-2019-1193.NASL", "REDHAT-RHSA-2019-1194.NASL", "REDHAT-RHSA-2019-1195.NASL", "REDHAT-RHSA-2019-1196.NASL", "REDHAT-RHSA-2019-1197.NASL", "REDHAT-RHSA-2019-1198.NASL", "REDHAT-RHSA-2019-1203.NASL", "REDHAT-RHSA-2019-1204.NASL", "REDHAT-RHSA-2019-1205.NASL", "REDHAT-RHSA-2019-1206.NASL", "REDHAT-RHSA-2019-1207.NASL", "REDHAT-RHSA-2019-1208.NASL", "REDHAT-RHSA-2019-1209.NASL", "REDHAT-RHSA-2019-1455.NASL", "REDHAT-RHSA-2019-2553.NASL", "SL_20190514_KERNEL_ON_SL6_X.NASL", "SL_20190514_KERNEL_ON_SL7_X.NASL", "SL_20190514_LIBVIRT_ON_SL6_X.NASL", "SL_20190514_LIBVIRT_ON_SL7_X.NASL", "SL_20190514_QEMU_KVM_ON_SL6_X.NASL", "SL_20190514_QEMU_KVM_ON_SL7_X.NASL", "SMB_NT_MS19_MAY_4494440.NASL", "SMB_NT_MS19_MAY_4494441.NASL", "SMB_NT_MS19_MAY_4499151.NASL", "SMB_NT_MS19_MAY_4499154.NASL", "SMB_NT_MS19_MAY_4499167.NASL", "SMB_NT_MS19_MAY_4499171.NASL", "SMB_NT_MS19_MAY_4499179.NASL", "SMB_NT_MS19_MAY_4499181.NASL", "SMB_NT_MS19_MAY_MICROCODE.NASL", "SUSE_SU-2019-1236-1.NASL", "SUSE_SU-2019-1242-1.NASL", "SUSE_SU-2019-1248-1.NASL", "SUSE_SU-2019-1268-1.NASL", "SUSE_SU-2019-1269-1.NASL", "SUSE_SU-2019-1272-1.NASL", "SUSE_SU-2019-1287-1.NASL", "SUSE_SU-2019-1289-1.NASL", "SUSE_SU-2019-1296-1.NASL", "SUSE_SU-2019-1313-1.NASL", "SUSE_SU-2019-1347-1.NASL", "SUSE_SU-2019-1348-1.NASL", "SUSE_SU-2019-1349-1.NASL", "SUSE_SU-2019-1356-1.NASL", "SUSE_SU-2019-1371-1.NASL", "SUSE_SU-2019-14051-1.NASL", "SUSE_SU-2019-14052-1.NASL", "SUSE_SU-2019-14063-1.NASL", "SUSE_SU-2019-1423-1.NASL", "SUSE_SU-2019-1438-1.NASL", "SUSE_SU-2019-1452-1.NASL", "SUSE_SU-2019-1490-1.NASL", "SUSE_SU-2019-1547-1.NASL", "SUSE_SU-2019-1550-1.NASL", "SUSE_SU-2019-1909-1.NASL", "SUSE_SU-2019-1910-1.NASL", "SUSE_SU-2019-1954-1.NASL", "SUSE_SU-2019-2430-1.NASL", "SUSE_SU-2019-2753-1.NASL", "SUSE_SU-2019-2769-1.NASL", "UBUNTU_USN-3977-1.NASL", "UBUNTU_USN-3977-2.NASL", "UBUNTU_USN-3977-3.NASL", "UBUNTU_USN-3978-1.NASL", "UBUNTU_USN-3979-1.NASL", "UBUNTU_USN-3980-1.NASL", "UBUNTU_USN-3980-2.NASL", "UBUNTU_USN-3981-1.NASL", "UBUNTU_USN-3981-2.NASL", "UBUNTU_USN-3982-1.NASL", "UBUNTU_USN-3982-2.NASL", "UBUNTU_USN-3983-1.NASL", "UBUNTU_USN-3985-1.NASL", "UBUNTU_USN-3985-2.NASL", "VIRTUOZZO_VZA-2019-037.NASL", "VIRTUOZZO_VZLSA-2019-1180.NASL", "VIRTUOZZO_VZLSA-2019-1181.NASL", "VMWARE_ESXI_VMSA-2019-0008.NASL", "VMWARE_VMSA-2019-0008.NASL", "XEN_SERVER_XSA-297.NASL"]}, {"type": "openvas", "idList": ["OPENVAS:1361412562310704444", "OPENVAS:1361412562310704447", "OPENVAS:1361412562310704469", "OPENVAS:1361412562310704564", "OPENVAS:1361412562310814887", "OPENVAS:1361412562310815045", "OPENVAS:1361412562310815046", "OPENVAS:1361412562310815047", "OPENVAS:1361412562310815048", "OPENVAS:1361412562310815049", "OPENVAS:1361412562310815050", "OPENVAS:1361412562310815051", "OPENVAS:1361412562310815052", "OPENVAS:1361412562310815453", "OPENVAS:1361412562310815454", "OPENVAS:1361412562310815455", "OPENVAS:1361412562310815456", "OPENVAS:1361412562310815457", "OPENVAS:1361412562310815459", "OPENVAS:1361412562310815461", "OPENVAS:1361412562310815462", "OPENVAS:1361412562310815463", "OPENVAS:1361412562310815486", "OPENVAS:1361412562310844004", "OPENVAS:1361412562310844006", "OPENVAS:1361412562310844007", "OPENVAS:1361412562310844008", "OPENVAS:1361412562310844009", "OPENVAS:1361412562310844010", "OPENVAS:1361412562310844011", "OPENVAS:1361412562310844012", "OPENVAS:1361412562310844013", "OPENVAS:1361412562310844021", "OPENVAS:1361412562310844061", "OPENVAS:1361412562310852502", "OPENVAS:1361412562310852503", "OPENVAS:1361412562310852504", "OPENVAS:1361412562310852505", "OPENVAS:1361412562310852506", "OPENVAS:1361412562310852507", "OPENVAS:1361412562310852508", "OPENVAS:1361412562310852509", "OPENVAS:1361412562310852523", "OPENVAS:1361412562310852535", "OPENVAS:1361412562310852638", "OPENVAS:1361412562310876360", "OPENVAS:1361412562310876361", "OPENVAS:1361412562310876363", "OPENVAS:1361412562310876365", "OPENVAS:1361412562310876368", "OPENVAS:1361412562310876374", "OPENVAS:1361412562310876375", "OPENVAS:1361412562310876377", "OPENVAS:1361412562310876381", "OPENVAS:1361412562310876383", "OPENVAS:1361412562310876385", "OPENVAS:1361412562310876390", "OPENVAS:1361412562310876392", "OPENVAS:1361412562310876399", "OPENVAS:1361412562310876422", "OPENVAS:1361412562310876423", "OPENVAS:1361412562310876441", "OPENVAS:1361412562310876445", "OPENVAS:1361412562310876476", "OPENVAS:1361412562310876479", "OPENVAS:1361412562310876489", "OPENVAS:1361412562310876510", "OPENVAS:1361412562310876515", "OPENVAS:1361412562310876543", "OPENVAS:1361412562310876550", "OPENVAS:1361412562310876553", "OPENVAS:1361412562310876555", "OPENVAS:1361412562310876563", "OPENVAS:1361412562310876564", "OPENVAS:1361412562310876565", "OPENVAS:1361412562310876567", "OPENVAS:1361412562310876586", "OPENVAS:1361412562310876611", "OPENVAS:1361412562310876809", "OPENVAS:1361412562310876841", "OPENVAS:1361412562310876869", "OPENVAS:1361412562310876925", "OPENVAS:1361412562310876943", "OPENVAS:1361412562310876995", "OPENVAS:1361412562310876999", "OPENVAS:1361412562310877008", "OPENVAS:1361412562310883051", "OPENVAS:1361412562310883052", "OPENVAS:1361412562310883053", "OPENVAS:1361412562310883054", "OPENVAS:1361412562310883055", "OPENVAS:1361412562310883056", "OPENVAS:1361412562310891787", "OPENVAS:1361412562310891789", "OPENVAS:1361412562310891799", "OPENVAS:1361412562310891989", "OPENVAS:1361412562310891990"]}, {"type": "oraclelinux", "idList": ["ELSA-2019-1168", "ELSA-2019-1169", "ELSA-2019-1177", "ELSA-2019-1178", "ELSA-2019-1180", "ELSA-2019-1181", "ELSA-2019-1488", "ELSA-2019-2703", "ELSA-2019-4628", "ELSA-2019-4629", "ELSA-2019-4630", "ELSA-2019-4636", "ELSA-2019-4637", "ELSA-2019-4640", "ELSA-2019-4643", "ELSA-2019-4669", "ELSA-2019-4713", "ELSA-2019-4714"]}, {"type": "paloalto", "idList": ["PAN-SA-2019-0012"]}, {"type": "photon", "idList": ["PHSA-2019-1.0-0236", "PHSA-2019-2.0-0161"]}, {"type": "qualysblog", "idList": ["QUALYSBLOG:FBDC4B445E6B33502BA1650A8BD4A6E1"]}, {"type": "redhat", "idList": ["RHSA-2019:1172", "RHSA-2019:1180", "RHSA-2019:1185", "RHSA-2019:1186", "RHSA-2019:1193", "RHSA-2019:1201"]}, {"type": "redhatcve", "idList": ["RH:CVE-2018-12126", "RH:CVE-2018-12127", "RH:CVE-2018-12130", "RH:CVE-2019-11091"]}, {"type": "suse", "idList": ["OPENSUSE-SU-2019:1402-1", "OPENSUSE-SU-2019:1403-1", "OPENSUSE-SU-2019:1404-1", "OPENSUSE-SU-2019:1405-1", "OPENSUSE-SU-2019:1407-1", "OPENSUSE-SU-2019:1408-1", "OPENSUSE-SU-2019:1419-1", "OPENSUSE-SU-2019:1420-1", "OPENSUSE-SU-2019:1468-1", "OPENSUSE-SU-2019:1505-1", "OPENSUSE-SU-2019:1805-1", "OPENSUSE-SU-2019:1806-1"]}, {"type": "talos", "idList": ["SAP"]}, {"type": "thn", "idList": ["THN:ABCC9DD36D10CA51E767D6104EF69F5C"]}, {"type": "threatpost", "idList": ["THREATPOST:6D16350D7053F9F2166165E3E33239B9", "THREATPOST:B43D65BEF15E504CF4DFB8EB516972D7", "THREATPOST:CBFAA2319AF4281EC1DD5C4682601942"]}, {"type": "ubuntu", "idList": ["USN-3977-1", "USN-3977-2", "USN-3977-3", "USN-3978-1", "USN-3979-1", "USN-3980-1", "USN-3980-2", "USN-3981-1", "USN-3981-2", "USN-3982-1", "USN-3982-2", "USN-3983-1", "USN-3983-2", "USN-3984-1", "USN-3985-1", "USN-3985-2"]}, {"type": "ubuntucve", "idList": ["UB:CVE-2018-12126", "UB:CVE-2018-12127", "UB:CVE-2018-12130", "UB:CVE-2019-11091"]}, {"type": "virtuozzo", "idList": ["VZA-2019-036", "VZA-2019-037"]}, {"type": "vmware", "idList": ["VMSA-2019-0008.2"]}, {"type": "xen", "idList": ["XSA-297"]}]}, "exploitation": null, "epss": [{"cve": "CVE-2018-12126", "epss": "0.000610000", "percentile": "0.237350000", "modified": "2023-03-14"}, {"cve": "CVE-2018-12127", "epss": "0.000610000", "percentile": "0.237350000", "modified": "2023-03-14"}, {"cve": "CVE-2018-12130", "epss": "0.000610000", "percentile": "0.237350000", "modified": "2023-03-14"}, {"cve": "CVE-2019-11091", "epss": "0.000610000", "percentile": "0.236500000", "modified": "2023-03-14"}], "vulnersScore": -0.2}, "_state": {"dependencies": 1659988328, "score": 1683999172, "epss": 1678886889}, "_internal": {"score_hash": "f188ebebae30e05572f397331ee4565d"}, "pluginID": "125117", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1171. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125117);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1171\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : kernel (RHSA-2019:1171) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 7.3\nAdvanced Update Support, Red Hat Enterprise Linux 7.3 Telco Extended\nUpdate Support, and Red Hat Enterprise Linux 7.3 Update Services for\nSAP Solutions.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* rwsem in inconsistent state leading system to hung (BZ#1690320)\n\n* iscsi driver can block reboot/shutdown (BZ#1693340)\n\n* ovl_create can return positive retval and crash the host\n(BZ#1696289)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1171\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.3\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.3([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.3\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1171\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1171\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", reference:\"kernel-abi-whitelists-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-debug-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-debug-devel-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-debuginfo-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-devel-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", reference:\"kernel-doc-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-headers-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-tools-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-tools-debuginfo-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-tools-libs-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"perf-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"perf-debuginfo-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"python-perf-3.10.0-514.64.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-3.10.0-514.64.2.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / etc\");\n }\n}\n", "naslFamily": "Red Hat Local Security Checks", "cpe": ["p-cpe:/a:redhat:enterprise_linux:kernel", "p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists", "p-cpe:/a:redhat:enterprise_linux:kernel-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-headers", "p-cpe:/a:redhat:enterprise_linux:kernel-tools", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel", "p-cpe:/a:redhat:enterprise_linux:perf", "p-cpe:/a:redhat:enterprise_linux:perf-debuginfo", "p-cpe:/a:redhat:enterprise_linux:python-perf", "p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo", "cpe:/o:redhat:enterprise_linux:7.3"], "solution": "Update the affected packages.", "nessusSeverity": "Medium", "cvssScoreSource": "CVE-2019-11091", "vpr": {"risk factor": "High", "score": "7.9"}, "exploitAvailable": false, "exploitEase": "No known exploits are available", "patchPublicationDate": "2019-05-14T00:00:00", "vulnerabilityPublicationDate": "2019-05-30T00:00:00", "exploitableWith": [], "vendor_cvss2": {}, "vendor_cvss3": {}}
{"fedora": [{"lastseen": "2021-07-28T14:46:51", "description": "This package contains the XenD daemon and xm command line tools, needed to manage virtual machines running under the Xen hypervisor ", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-07-01T01:09:24", "type": "fedora", "title": "[SECURITY] Fedora 30 Update: xen-4.11.1-6.fc30", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-07-01T01:09:24", "id": "FEDORA:609B763560C6", "href": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/thread/POJUMDAYVYNIEBIUI7KEK5PZGXRPMER4/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-07-28T14:46:51", "description": "QEMU is a generic and open source processor emulator which achieves a good emulation speed by using dynamic translation. QEMU has two operating modes: * Full system emulation. In this mode, QEMU emulates a full system (for example a PC), including a processor and various peripherials. It can be used to launch different Operating Systems without rebooting the PC or to debug system code. * User mode emulation. In this mode, QEMU can launch Linux processes compi led for one CPU on another CPU. As QEMU requires no host kernel patches to run, it is safe and easy to use. ", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-17T01:08:38", "type": "fedora", "title": "[SECURITY] Fedora 30 Update: qemu-3.1.0-8.fc30", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-17T01:08:38", "id": "FEDORA:CFE4360D22F6", "href": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/thread/Y5FN3EW4TD5ZVVHRJTLXZKQIV75IVGZ5/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-07-28T14:46:51", "description": "Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes the libvirtd server exporting the virtualization support. ", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-17T01:08:36", "type": "fedora", "title": "[SECURITY] Fedora 30 Update: libvirt-5.1.0-5.fc30", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-17T01:08:36", "id": "FEDORA:9833860D22D9", "href": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/thread/JA5T2KLIYRYX4XMARLFBPB45B2INDALL/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2021-07-28T14:46:51", "description": "This package contains the XenD daemon and xm command line tools, needed to manage virtual machines running under the Xen hypervisor ", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-18T01:05:01", "type": "fedora", "title": "[SECURITY] Fedora 30 Update: xen-4.11.1-5.fc30", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2019-05-18T01:05:01", "id": "FEDORA:E197860874D7", "href": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/thread/RREVXTDNJJBRYC7JCONG5O3AQGOUE6IO/", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}], "myhack58": [{"lastseen": "2019-05-20T05:22:37", "description": "Background understanding\n\n5 March 15, the media exposed, security researchers at a month before the Intel chip found in the one called\u201cZombieLoad\u201dthe new vulnerability, this vulnerability may allow an attacker to obtain the current processor is processing the sensitive data.\n\nAn attacker can exploit this vulnerability to initiate the Intel chip's side-channel attack, which is following the earlier Meltdown, the Spectre and Foreshadow after the most serious security vulnerabilities, researchers at a month previous to the Intel report these vulnerabilities.\n\n\u201cZombieLoad\u201ddirect understanding is the\u201czombie load\u201d, i.e. the processor can't understand or properly handle the large amounts of data, forcing the processor to the processor of the microcode request help to prevent a crash. The application usually can only see their own data, but this vulnerability could allow data flow through these boundary walls. The researchers said that ZombieLoad the leakage of the processor cores that are currently loaded all the data. This means that hackers make use of is actually a design flaw, rather than the injection of malicious code.\n\nAttack\n\nWith three previous side-channel attack Meltdown, the Spectre and Foreshadow\uff09in a similar way, the new attack is the use of the processor's speculative execution in the process of vulnerability.\n\nThis vulnerability whereby the former involved in the Meltdown, the Spectre of vulnerability research on the part of the security personnel, as well as Bitdefender security personnel of the joint discovery, which is actually for the micro-architecture of the data sampling\uff08MDS\uff09attack, you can use the micro-architecture of the speculative execution of the operation to infer other applications on the processor in the data processing.\n\nIntel said ZombieLoad includes 4 exploits. Respectively, is directed to the storage buffer area of the attack CVE-2018-12126/Fallout, the loading buffer CVE-2018-12127, and a line fill buffer CVE-2018-12130/Zombieload/RIDL, and the memory area CVE-2019-11091 it. Wherein Zombieload is severity the highest, to be able to get the maximum amount of and privacy of data.\n\nThe scope of the impact\n\nSince 2011 the release of all Intel processors is likely to be affected, especially the cloud hosting services may be subject to larger shocks. At the same time Intel also noted that the MDS attacks actually use the higher difficulty, its practical impact is not so large.\n\nBug fixes\n\nCurrently Intel has released a microcode update, and the new processor will not be affected. This includes the Intel Xeon, the Broadwell And Sandy Bridge, And Skylake and Haswell chips and models. Kaby Lake, Coffee Lake, Whiskey Lake and Cascade Lake, and all of the atom and the Knights of the processor are also affected.\n\nCurrently, Apple, Microsoft and Google have already released patches.\n\nIntel on the micro-structure of the data sampling analysis\n\nThe micro-architecture of the data sampling\uff08MDS\uff09work principle\n\nMDS allows can be executed locally on the system the code of the malicious user inferred by the schema mechanism to protect the data, although the use of loopholes\u201cZombieLoad\u201don the system to locate specific data may be very difficult, but the malicious attacker can collect and analyze large amounts of data to find the protected data. Specific process, please see the deep dive in the MDS table: CPUID enumeration and architecture of the MSR action, through this way to obtain may be affected by MDS the impact of the processor list. MDS only relates to the primary data cache(L1D)outside of the micro system structure the structure of The Associated method, and therefore does not include the exception data cache load(RDCL)or L1 Terminal failure(L1TF)\u3002\n\nMDS speculative execution side-channel method can be used to leak following micro-architectural structures in the data:\n\n1. Storage buffer: used to save the storage address and the data of the temporary buffers;\n\n2. Fill the buffer: CPU cache between the temporary buffer;\n\n3. Loading port: will be loaded into the data register when using the temporary buffer;\n\nOf these structure than the L1D is much smaller, and therefore can save less data, and more are frequently covered. The use of MDS methods to infer with a particular memory address associated with the data is also more difficult, which may require a malicious attacker to gather a lot of data and analyzed to find any protected data.\n\nThe new micro-code update(MCUs)is being planned to be released to help the program mitigate these vulnerabilities. Intel recommends that in switching to the previous program untrusted program to update the micro code and remove the micro-architecture of the buffer area. These mitigation measures will be required for the[operating system](<http://www.myhack58.com/Article/48/Article_048_1.htm>), the Virtual Machine Management Program and the Intel \u00aeprogram Protection Extensions the Intel \u00aeSGX for changes and updates.\n\nIn this document the micro-architecture details only apply to the MDS technical effect of the processor, and not all Intel processors a General purpose processor. For the affected processor list, please refer to the CPUID enumeration and architecture of the MSR.\n\nThe micro-architecture of the storage buffer data sampling\uff08MSBDS\uff09CVE-2018-12126\n\nPerform the storage operation, the processor writes data is called a storage buffer of a temporary micro-architecture. This makes the processor capable of writing data into the cache or main memory before continuing execution of the storage operation after the instruction. In addition, the I / O write, for example, the OUT is also stored in the storage buffer.\n\nWhen the load operation from the earlier Store operation to the same memory address when data is read, the processor can directly from the memory buffer forwards the data to the load operation instead of the wait from memory or cache to load data, this optimization process is referred to as a repository to load forwarding store-to-load forwarding it.\n\nUnder certain conditions, from the storage operation of the data from the Store Buffer is speculatively forwarded to a different memory address of the fault or auxiliary load operation. Since the memory size is less than the stored buffer width, or not to perform storage of the data portion, therefore storage may not cover the memory buffer within the entire data field. These situations may cause forwarding of data from previously stored data. Since the loading operation will lead to a fault/assist1 and its results will be discarded, and therefore the forwarding of data does not lead to the vulnerability of the program execution or the architectural state change. However, a malicious attacker may be able to be such only for speculative data forwarded to an open-source gadget framework disclosure gadget, to allow them to infer this value.\n\nMSBDS the cross-thread implications\n\nFor the MSBDS effects processors, physical cores on the stored data buffer in the kernel on the active thread on the static partition. This means that having two active threads of the kernel will have half the storage buffer entry is used only for Thread 1, the half only for another thread. When the thread enters the sleep state, its store buffer entry may be other active threads to use. This will cause previously used to enter the sleep state of the thread, and may contain expired data of the storage buffer entry by the other active thread reuse. When a thread from a sleep state is Wake-up time, the storage buffer will be re-partition. This will cause the memory buffer Store Buffer entry from the already active thread of the transmission to just Wake up the thread.\n\nThe micro-architecture of the fill of the buffer data sampling\uff08MFBDS\uff09CVE-2018-12130\n\nFill the buffer is an internal structure, for collecting a first level data cache lost data. When the memory request missing the L1 data cache, the processor will allocate a fill buffer to manage the data of the cache line Request. In addition, the fill buffer is also temporary management response to the memory or by the I / O operation returns, or to send the data. Fill the buffer data can be forwarded to the load operation, you can also write data to the data cache. Once the fill buffer data is written to the cache, the processor will release the fill buffer, thereby allowing in the future the memory operation in the reuse of the entry.\n", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-20T00:00:00", "type": "myhack58", "title": "Intel official for 5 on 15, the aeration out of the CPU side channel vulnerabilities\u201cZombieLoad\u201ddetailed technical analysis on-the vulnerability warning-the black bar safety net", "bulletinFamily": "info", "hackapp": {}, "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-05-20T00:00:00", "id": "MYHACK58:62201994183", "href": "http://www.myhack58.com/Article/html/3/62/2019/94183.htm", "sourceData": "", "cvss": {"score": 0.0, "vector": "NONE"}}, {"lastseen": "2019-05-15T15:20:57", "description": "! [](/Article/UploadPic/2019-5/2019515185455532. png) \n\nSecurity personnel recently discovered for Intel processor of the new side channel attack, which is also following the earlier Meltdown, the Spectre and Foreshadow after a fairly serious security problems. This vulnerability may allow an attacker to obtain the current processor is processing the data. \n\nFor the speculative execution of the new attack mode \nWith three previous side-channel attacks in a similar way, the new attack is the use of the processor's speculative execution problems in the process. \nThis vulnerability whereby the former involved in the Meltdown, the Spectre of vulnerability research on the part of the security personnel, as well as Bitdefender security personnel of the joint discovery, which is actually for the micro-architecture of the data sampling\uff08MDS\uff09attack, you can use the micro-architecture of the speculative execution of the operation to infer other applications on the processor in the data processing. \nCurrently such\uff08MDS\uff09attack has four kinds, respectively is directed to the storage buffer area of the attack CVE-2018-12126/Fallout, the loading buffer CVE-2018-12127, and a line fill buffer CVE-2018-12130/Zombieload/RIDL, and the memory area CVE-2019-11091 it. Wherein Zombieload is severity the highest, to be able to get the maximum amount of data. \n\nThe scope of the impact \nRecently published research papers mentioned, since 2011 the release of all Intel processors is likely to be affected, especially the cloud hosting services may be subject to larger shocks. There are already part of the security personnel posted some demo videos, here you can watch\uff081\u30012\u30013\uff09\u3002 The demo showed Zombieload attack can achieve a breakthrough between applications of the privacy protection function to obtain sensitive information. \n\nBug fixes \nCurrently Intel has released a microcode update, and the new processor will not be affected. Expect Microsoft, Apple and Linux each release will also soon launch a system update to mitigate this vulnerability. \nAt the same time Intel also noted that the MDS attacks actually use the higher difficulty, its practical impact is not so large. \nThe current security personnel have been Zombieload establish a website and publish the research papers, bug fixes navigation and other content, the user can timely update: https://zombieloadattack.com/ the. \n\n", "cvss3": {"exploitabilityScore": 1.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "HIGH", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.6, "privilegesRequired": "LOW", "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N", "userInteraction": "NONE", "version": "3.0"}, "impactScore": 4.0}, "published": "2019-05-15T00:00:00", "type": "myhack58", "title": "Zombieload: Intel CPU exposure of a new side channel attack-exploit warning-the black bar safety net", "bulletinFamily": "info", "hackapp": {}, "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 3.4, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.7, "vectorString": "AV:L/AC:M/Au:N/C:C/I:N/A:N", "version": "2.0", "accessVector": "LOCAL", "authentication": "NONE"}, "acInsufInfo": false, "impactScore": 6.9, "obtainUserPrivilege": false}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-05-15T00:00:00", "id": "MYHACK58:62201994150", "href": "http://www.myhack58.com/Article/html/3/62/2019/94150.htm", "sourceData": "", "cvss": {"score": 0.0, "vector": "NONE"}}], "openvas": [{"lastseen": "2019-06-05T01:40:52", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "openvas", "title": "Fedora Update for libvirt FEDORA-2019-f910d35647", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310876368", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310876368", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.876368\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-17 02:12:12 +0000 (Fri, 17 May 2019)\");\n script_name(\"Fedora Update for libvirt FEDORA-2019-f910d35647\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Fedora Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/fedora\", \"ssh/login/rpms\", re:\"ssh/login/release=FC30\");\n\n script_xref(name:\"FEDORA\", value:\"2019-f910d35647\");\n script_xref(name:\"URL\", value:\"https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/JA5T2KLIYRYX4XMARLFBPB45B2INDALL\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'libvirt'\n package(s) announced via the FEDORA-2019-f910d35647 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Libvirt is a C toolkit to interact with the virtualization capabilities\nof recent versions of Linux (and other OSes). The main package includes\nthe libvirtd server exporting the virtualization support.\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on Fedora 30.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"FC30\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt\", rpm:\"libvirt~5.1.0~5.fc30\", rls:\"FC30\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:02", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "Ubuntu Update for libvirt USN-3985-1", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310844013", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310844013", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.844013\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12130\", \"CVE-2018-12127\", \"CVE-2018-12126\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:01:19 +0000 (Thu, 16 May 2019)\");\n script_name(\"Ubuntu Update for libvirt USN-3985-1\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Ubuntu Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/ubuntu_linux\", \"ssh/login/packages\", re:\"ssh/login/release=(UBUNTU18\\.10|UBUNTU19\\.04|UBUNTU18\\.04 LTS|UBUNTU16\\.04 LTS)\");\n\n script_xref(name:\"USN\", value:\"3985-1\");\n script_xref(name:\"URL\", value:\"http://www.ubuntu.com/usn/usn-3985-1/\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'libvirt'\n package(s) announced via the USN-3985-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan\nHorea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos,\nCristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss\ndiscovered that memory previously stored in microarchitectural fill buffers\nof an Intel CPU core may be exposed to a malicious process that is\nexecuting on the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan\nvan Schaik, Alyssa Milburn, Sebastian sterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, and Cristiano Giuffrida discovered that memory\npreviously stored in microarchitectural load ports of an Intel CPU core may\nbe exposed to a malicious process that is executing on the same CPU core. A\nlocal attacker could use this to expose sensitive information.\n(CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel\nMoghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel\nGruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory\npreviously stored in microarchitectural store buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same CPU\ncore. A local attacker could use this to expose sensitive information.\n(CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and\nCristiano Giuffrida discovered that uncacheable memory previously stored in\nmicroarchitectural buffers of an Intel CPU core may be exposed to a\nmalicious process that is executing on the same CPU core. A local attacker\ncould use this to expose sensitive information. (CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on Ubuntu 19.04, Ubuntu 18.10, Ubuntu 18.04 LTS, Ubuntu 16.04 LTS.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nrelease = dpkg_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"UBUNTU18.10\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-clients\", ver:\"4.6.0-2ubuntu3.5\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-daemon\", ver:\"4.6.0-2ubuntu3.5\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt0\", ver:\"4.6.0-2ubuntu3.5\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU19.04\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-clients\", ver:\"5.0.0-1ubuntu2.1\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-daemon\", ver:\"5.0.0-1ubuntu2.1\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt0\", ver:\"5.0.0-1ubuntu2.1\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU18.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-clients\", ver:\"4.0.0-1ubuntu8.10\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-daemon\", ver:\"4.0.0-1ubuntu8.10\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt0\", ver:\"4.0.0-1ubuntu8.10\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU16.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt-bin\", ver:\"1.3.1-1ubuntu10.26\", rls:\"UBUNTU16.04 LTS\"))) {\n report += res;\n }\n\n if(!isnull(res = isdpkgvuln(pkg:\"libvirt0\", ver:\"1.3.1-1ubuntu10.26\", rls:\"UBUNTU16.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:05", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "CentOS Update for libvirt CESA-2019:1177 centos7 ", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310883056", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310883056", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.883056\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:01:08 +0000 (Thu, 16 May 2019)\");\n script_name(\"CentOS Update for libvirt CESA-2019:1177 centos7 \");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"CentOS Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/centos\", \"ssh/login/rpms\", re:\"ssh/login/release=CentOS7\");\n\n script_xref(name:\"CESA\", value:\"2019:1177\");\n script_xref(name:\"URL\", value:\"http://lists.centos.org/pipermail/centos-announce/2019-May/023313.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'libvirt'\n package(s) announced via the CESA-2019:1177 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"The libvirt library contains a C API for managing and interacting with the\nvirtualization capabilities of Linux and other operating systems. In\naddition, libvirt provides tools for remote management of virtualized\nsystems.\n\nSecurity Fix(es):\n\n * A flaw was found in the implementation of the 'fill buffer', a mechanism\nused by modern CPUs when a cache-miss is made on L1 CPU cache. If an\nattacker can generate a load operation that would create a page fault, the\nexecution will continue speculatively with incorrect data from the fill\nbuffer while the data is fetched from higher level caches. This response\ntime can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n * Modern Intel microprocessors implement hardware-level micro-optimizations\nto improve the performance of writing data back to CPU caches. The write\noperation is split into STA (STore Address) and STD (STore Data)\nsub-operations. These sub-operations allow the processor to hand-off\naddress generation logic into these sub-operations for optimized writes.\nBoth of these sub-operations write to a shared distributed processor\nstructure called the 'processor store buffer'. As a result, an\nunprivileged attacker could use this flaw to read private data resident\nwithin the CPU's processor store buffer. (CVE-2018-12126)\n\n * Microprocessors use a load port subcomponent to perform load operations\nfrom memory or IO. During a load operation, the load port receives data\nfrom the memory or IO subsystem and then provides the data to the CPU\nregisters and operations in the CPUs pipelines. Stale load operations\nresults are stored in the 'load port' table until overwritten by newer\noperations. Certain load-port operations triggered by an attacker can be\nused to reveal data about previous stale requests leaking data back to the\nattacker via a timing side-channel. (CVE-2018-12127)\n\n * Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable information\ndisclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS\nscore, acknowledgments, and other related information, refer to the CVE\npage(s) listed in the References section.\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on CentOS 7.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"CentOS7\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt\", rpm:\"libvirt~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-admin\", rpm:\"libvirt-admin~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-bash-completion\", rpm:\"libvirt-bash-completion~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client\", rpm:\"libvirt-client~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon\", rpm:\"libvirt-daemon~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-network\", rpm:\"libvirt-daemon-config-network~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-nwfilter\", rpm:\"libvirt-daemon-config-nwfilter~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-interface\", rpm:\"libvirt-daemon-driver-interface~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-lxc\", rpm:\"libvirt-daemon-driver-lxc~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-network\", rpm:\"libvirt-daemon-driver-network~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nodedev\", rpm:\"libvirt-daemon-driver-nodedev~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nwfilter\", rpm:\"libvirt-daemon-driver-nwfilter~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-qemu\", rpm:\"libvirt-daemon-driver-qemu~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-secret\", rpm:\"libvirt-daemon-driver-secret~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage\", rpm:\"libvirt-daemon-driver-storage~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-core\", rpm:\"libvirt-daemon-driver-storage-core~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-disk\", rpm:\"libvirt-daemon-driver-storage-disk~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-gluster\", rpm:\"libvirt-daemon-driver-storage-gluster~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-iscsi\", rpm:\"libvirt-daemon-driver-storage-iscsi~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-logical\", rpm:\"libvirt-daemon-driver-storage-logical~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-mpath\", rpm:\"libvirt-daemon-driver-storage-mpath~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-rbd\", rpm:\"libvirt-daemon-driver-storage-rbd~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-scsi\", rpm:\"libvirt-daemon-driver-storage-scsi~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-kvm\", rpm:\"libvirt-daemon-kvm~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-lxc\", rpm:\"libvirt-daemon-lxc~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-devel\", rpm:\"libvirt-devel~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-docs\", rpm:\"libvirt-docs~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-libs\", rpm:\"libvirt-libs~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-lock-sanlock\", rpm:\"libvirt-lock-sanlock~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-login-shell\", rpm:\"libvirt-login-shell~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-nss\", rpm:\"libvirt-nss~4.5.0~10.el7_6.9\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:05", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "CentOS Update for kernel CESA-2019:1169 centos6 ", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310883054", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310883054", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.883054\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:01:00 +0000 (Thu, 16 May 2019)\");\n script_name(\"CentOS Update for kernel CESA-2019:1169 centos6 \");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"CentOS Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/centos\", \"ssh/login/rpms\", re:\"ssh/login/release=CentOS6\");\n\n script_xref(name:\"CESA\", value:\"2019:1169\");\n script_xref(name:\"URL\", value:\"http://lists.centos.org/pipermail/centos-announce/2019-May/023309.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'kernel'\n package(s) announced via the CESA-2019:1169 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"The kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es):\n\n * A flaw was found in the implementation of the 'fill buffer', a mechanism\nused by modern CPUs when a cache-miss is made on L1 CPU cache. If an\nattacker can generate a load operation that would create a page fault, the\nexecution will continue speculatively with incorrect data from the fill\nbuffer while the data is fetched from higher level caches. This response\ntime can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n * Modern Intel microprocessors implement hardware-level micro-optimizations\nto improve the performance of writing data back to CPU caches. The write\noperation is split into STA (STore Address) and STD (STore Data)\nsub-operations. These sub-operations allow the processor to hand-off\naddress generation logic into these sub-operations for optimized writes.\nBoth of these sub-operations write to a shared distributed processor\nstructure called the 'processor store buffer'. As a result, an unprivileged\nattacker could use this flaw to read private data resident within the CPU's\nprocessor store buffer. (CVE-2018-12126)\n\n * Microprocessors use a load port subcomponent to perform load operations\nfrom memory or IO. During a load operation, the load port receives data\nfrom the memory or IO subsystem and then provides the data to the CPU\nregisters and operations in the CPUs pipelines. Stale load operations\nresults are stored in the 'load port' table until overwritten by newer\noperations. Certain load-port operations triggered by an attacker can be\nused to reveal data about previous stale requests leaking data back to the\nattacker via a timing side-channel. (CVE-2018-12127)\n\n * Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable information\ndisclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS\nscore, acknowledgments, and other related information, refer to the CVE\npage(s) listed in the References section.\n\nBug Fix(es):\n\n * aio O_DIRECT writes to non-page-aligned file locations on ext4 can result\nin the overlapped portion of the page containing zeros (BZ#1686170)\n\n * Tolerate new s390x crypto hardware for migration (BZ#1695496)\");\n\n script_tag(name:\"affected\", value:\"'kernel' package(s) on CentOS 6.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"CentOS6\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel\", rpm:\"kernel~2.6.32~754.14.2.el6\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-abi-whitelists\", rpm:\"kernel-abi-whitelists~2.6.32~754.14.2.el6\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-debug\", rpm:\"kernel-debug~2.6.32~754.14.2.el6\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-debug-devel\", rpm:\"kernel-debug-devel~2.6.32~754.14.2.el6\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-devel\", rpm:\"kernel-devel~2.6.32~754.14.2.el6\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-doc\", rpm:\"kernel-doc~2.6.32~754.14.2.el6\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-firmware\", rpm:\"kernel-firmware~2.6.32~754.14.2.el6\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-headers\", rpm:\"kernel-headers~2.6.32~754.14.2.el6\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"perf\", rpm:\"perf~2.6.32~754.14.2.el6\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"python-perf\", rpm:\"python-perf~2.6.32~754.14.2.el6\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-27T14:43:33", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-06-21T00:00:00", "type": "openvas", "title": "Ubuntu Update for intel-microcode USN-3977-3", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-27T00:00:00", "id": "OPENVAS:1361412562310844061", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310844061", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.844061\");\n script_version(\"2019-06-27T06:30:18+0000\");\n script_cve_id(\"CVE-2018-12130\", \"CVE-2018-12127\", \"CVE-2018-12126\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-27 06:30:18 +0000 (Thu, 27 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-06-21 02:00:50 +0000 (Fri, 21 Jun 2019)\");\n script_name(\"Ubuntu Update for intel-microcode USN-3977-3\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Ubuntu Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/ubuntu_linux\", \"ssh/login/packages\", re:\"ssh/login/release=(UBUNTU18\\.10|UBUNTU19\\.04|UBUNTU18\\.04 LTS|UBUNTU16\\.04 LTS)\");\n\n script_xref(name:\"USN\", value:\"3977-3\");\n script_xref(name:\"URL\", value:\"http://www.ubuntu.com/usn/usn-3977-3/\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'intel-microcode'\n package(s) announced via the USN-3977-3 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"USN-3977-1 and USN-3977-2 provided mitigations for Microarchitectural\nData Sampling (MDS) vulnerabilities in Intel Microcode for a\nlarge number of Intel processor families. This update provides the\ncorresponding updated microcode mitigations for the Intel Sandy Bridge\nprocessor family\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan\nHorea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos,\nCristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss\ndiscovered that memory previously stored in microarchitectural fill buffers\nof an Intel CPU core may be exposed to a malicious process that is\nexecuting on the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan\nvan Schaik, Alyssa Milburn, Sebastian sterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, and Cristiano Giuffrida discovered that memory\npreviously stored in microarchitectural load ports of an Intel CPU core may\nbe exposed to a malicious process that is executing on the same CPU core. A\nlocal attacker could use this to expose sensitive information.\n(CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel\nMoghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel\nGruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory\npreviously stored in microarchitectural store buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same CPU\ncore. A local attacker could use this to expose sensitive information.\n(CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and\nCristiano Giuffrida discovered that uncacheable memory previously stored in\nmicroarchitectural buffers of an Intel CPU core may be exposed to a\nmalicious process that is executing on the same CPU core. A local attacker\ncould use this to expose sensitive information. (CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'intel-microcode' package(s) on Ubuntu 19.04, Ubuntu 18.10, Ubuntu 18.04 LTS, Ubuntu 16.04 LTS.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nrelease = dpkg_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"UBUNTU18.10\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190618.0ubuntu0.18.10.1\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU19.04\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190618.0ubuntu0.19.04.1\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU18.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190618.0ubuntu0.18.04.1\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU16.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190618.0ubuntu0.16.04.1\", rls:\"UBUNTU16.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-29T19:29:46", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "openvas", "title": "Debian LTS: Security Advisory for intel-microcode (DLA-1789-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-29T00:00:00", "id": "OPENVAS:1361412562310891789", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310891789", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.891789\");\n script_version(\"2020-01-29T08:22:52+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-29 08:22:52 +0000 (Wed, 29 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-17 02:00:09 +0000 (Fri, 17 May 2019)\");\n script_name(\"Debian LTS: Security Advisory for intel-microcode (DLA-1789-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Debian Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/debian_linux\", \"ssh/login/packages\", re:\"ssh/login/release=DEB8\");\n\n script_xref(name:\"URL\", value:\"https://lists.debian.org/debian-lts-announce/2019/05/msg00018.html\");\n script_xref(name:\"URL\", value:\"https://security-tracker.debian.org/tracker/DLA-1789-1\");\n script_xref(name:\"URL\", value:\"https://bugs.debian.org/929007\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'intel-microcode'\n package(s) announced via the DLA-1789-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update ships updated CPU microcode for most types of Intel CPUs. It\nprovides microcode support to implement mitigations for the MSBDS,\nMFBDS, MLPDS and MDSUM hardware vulnerabilities.\n\nTo fully resolve these vulnerabilities it is also necessary to update\nthe Linux kernel packages. Please refer to DLA-1787-1 for the Linux\nkernel updates required to mitigate these hardware vulnerabilities on\nIntel processors.\");\n\n script_tag(name:\"affected\", value:\"'intel-microcode' package(s) on Debian Linux.\");\n\n script_tag(name:\"solution\", value:\"For Debian 8 'Jessie', these problems have been fixed in version\n3.20190514.1~deb8u1 of the intel-microcode package, and also by the\nLinux kernel package updates described in DLA-1787-1.\n\nWe recommend that you upgrade your intel-microcode packages, and Linux\nkernel packages.\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nres = \"\";\nreport = \"\";\nif(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.1~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\n\nif(report != \"\") {\n security_message(data:report);\n} else if(__pkg_match) {\n exit(99);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:40:52", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "openvas", "title": "Fedora Update for qemu FEDORA-2019-f910d35647", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310876375", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310876375", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.876375\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-17 02:12:27 +0000 (Fri, 17 May 2019)\");\n script_name(\"Fedora Update for qemu FEDORA-2019-f910d35647\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Fedora Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/fedora\", \"ssh/login/rpms\", re:\"ssh/login/release=FC30\");\n\n script_xref(name:\"FEDORA\", value:\"2019-f910d35647\");\n script_xref(name:\"URL\", value:\"https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/Y5FN3EW4TD5ZVVHRJTLXZKQIV75IVGZ5\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'qemu'\n package(s) announced via the FEDORA-2019-f910d35647 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"QEMU is a generic and open source processor emulator which achieves a good\nemulation speed by using dynamic translation. QEMU has two operating modes:\n\n * Full system emulation. In this mode, QEMU emulates a full system (for\n example a PC), including a processor and various peripherals. It can be\n used to launch different Operating Systems without rebooting the PC or\n to debug system code.\n\n * User mode emulation. In this mode, QEMU can launch Linux processes compiled\n for one CPU on another CPU.\n\nAs QEMU requires no host kernel patches to run, it is safe and easy to use.\");\n\n script_tag(name:\"affected\", value:\"'qemu' package(s) on Fedora 30.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"FC30\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu\", rpm:\"qemu~3.1.0~8.fc30\", rls:\"FC30\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:02", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "openvas", "title": "Ubuntu Update for intel-microcode USN-3977-1", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310844011", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310844011", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.844011\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12130\", \"CVE-2018-12127\", \"CVE-2018-12126\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-15 02:03:18 +0000 (Wed, 15 May 2019)\");\n script_name(\"Ubuntu Update for intel-microcode USN-3977-1\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Ubuntu Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/ubuntu_linux\", \"ssh/login/packages\", re:\"ssh/login/release=(UBUNTU18\\.10|UBUNTU19\\.04|UBUNTU18\\.04 LTS|UBUNTU16\\.04 LTS)\");\n\n script_xref(name:\"USN\", value:\"3977-1\");\n script_xref(name:\"URL\", value:\"http://www.ubuntu.com/usn/usn-3977-1/\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'intel-microcode'\n package(s) announced via the USN-3977-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan\nHorea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos,\nCristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss\ndiscovered that memory previously stored in microarchitectural fill buffers\nof an Intel CPU core may be exposed to a malicious process that is\nexecuting on the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan\nvan Schaik, Alyssa Milburn, Sebastian sterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, and Cristiano Giuffrida discovered that memory\npreviously stored in microarchitectural load ports of an Intel CPU core may\nbe exposed to a malicious process that is executing on the same CPU core. A\nlocal attacker could use this to expose sensitive information.\n(CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel\nMoghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel\nGruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory\npreviously stored in microarchitectural store buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same CPU\ncore. A local attacker could use this to expose sensitive information.\n(CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and\nCristiano Giuffrida discovered that uncacheable memory previously stored in\nmicroarchitectural buffers of an Intel CPU core may be exposed to a\nmalicious process that is executing on the same CPU core. A local attacker\ncould use this to expose sensitive information. (CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'intel-microcode' package(s) on Ubuntu 19.04, Ubuntu 18.10, Ubuntu 18.04 LTS, Ubuntu 16.04 LTS.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nrelease = dpkg_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"UBUNTU18.10\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.18.10.1\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU19.04\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.19.04.1\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU18.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.18.04.2\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU16.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.16.04.1\", rls:\"UBUNTU16.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-31T16:53:01", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for xen (openSUSE-SU-2019:1403-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852502", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852502", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852502\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-17 02:00:46 +0000 (Fri, 17 May 2019)\");\n script_name(\"openSUSE: Security Advisory for xen (openSUSE-SU-2019:1403-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap15\\.0\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1403-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-05/msg00038.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'xen'\n package(s) announced via the openSUSE-SU-2019:1403-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for xen fixes the following issues:\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the XEN Hypervisor adjustments, that additionally\n also use CPU Microcode updates.\n\n The mitigation can be controlled via the 'mds' commandline option, see the\n documentation.\n\n - Added code to change LIBXL_HOTPLUG_TIMEOUT at runtime.\n\n The included README has details about the impact of this change\n (bsc#1120095)\n\n - Fixes in Live migrating PV domUs\n\n An earlier change broke live migration of PV domUs without a device\n model. The migration would stall for 10 seconds while the domU was paused,\n which caused network connections to drop. Fix this by tracking the need\n for a device model within libxl. (bsc#1079730, bsc#1098403, bsc#1111025)\n\n - Libvirt segfault when crash triggered on top of HVM guest (bsc#1120067)\n\n This update was imported from the SUSE:SLE-15:Update update project.\n\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1403=1\");\n\n script_tag(name:\"affected\", value:\"'xen' package(s) on openSUSE Leap 15.0.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap15.0\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-debugsource\", rpm:\"xen-debugsource~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-devel\", rpm:\"xen-devel~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-libs\", rpm:\"xen-libs~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-libs-debuginfo\", rpm:\"xen-libs-debuginfo~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-tools-domU\", rpm:\"xen-tools-domU~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-tools-domU-debuginfo\", rpm:\"xen-tools-domU-debuginfo~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen\", rpm:\"xen~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-doc-html\", rpm:\"xen-doc-html~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-libs-32bit\", rpm:\"xen-libs-32bit~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-libs-32bit-debuginfo\", rpm:\"xen-libs-32bit-debuginfo~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-tools\", rpm:\"xen-tools~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"xen-tools-debuginfo\", rpm:\"xen-tools-debuginfo~4.10.3_04~lp150.2.19.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:40:46", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-19T00:00:00", "type": "openvas", "title": "Fedora Update for xen FEDORA-2019-6458474bf2", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310876383", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310876383", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.876383\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-19 02:10:10 +0000 (Sun, 19 May 2019)\");\n script_name(\"Fedora Update for xen FEDORA-2019-6458474bf2\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Fedora Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/fedora\", \"ssh/login/rpms\", re:\"ssh/login/release=FC30\");\n\n script_xref(name:\"FEDORA\", value:\"2019-6458474bf2\");\n script_xref(name:\"URL\", value:\"https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/RREVXTDNJJBRYC7JCONG5O3AQGOUE6IO\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'xen'\n package(s) announced via the FEDORA-2019-6458474bf2 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is\n present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This package contains the XenD daemon and xm\n command line tools, needed to manage virtual machines running under the Xen\n hypervisor\");\n\n script_tag(name:\"affected\", value:\"'xen' package(s) on Fedora 30.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"FC30\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"xen\", rpm:\"xen~4.11.1~5.fc30\", rls:\"FC30\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-03-30T16:57:20", "description": "The remote host is missing an update for the Huawei EulerOS\n ", "cvss3": {}, "published": "2020-01-23T00:00:00", "type": "openvas", "title": "Huawei EulerOS: Security Advisory for qemu (EulerOS-SA-2019-2300)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-03-26T00:00:00", "id": "OPENVAS:1361412562311220192300", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562311220192300", "sourceData": "# Copyright (C) 2020 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.1.2.2019.2300\");\n script_version(\"2020-03-26T11:51:34+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-03-26 11:51:34 +0000 (Thu, 26 Mar 2020)\");\n script_tag(name:\"creation_date\", value:\"2020-01-23 12:45:50 +0000 (Thu, 23 Jan 2020)\");\n script_name(\"Huawei EulerOS: Security Advisory for qemu (EulerOS-SA-2019-2300)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2020 Greenbone Networks GmbH\");\n script_family(\"Huawei EulerOS Local Security Checks\");\n script_dependencies(\"gb_huawei_euleros_consolidation.nasl\");\n script_mandatory_keys(\"ssh/login/euleros\", \"ssh/login/rpms\", re:\"ssh/login/release=EULEROS-2\\.0SP8\");\n\n script_xref(name:\"EulerOS-SA\", value:\"2019-2300\");\n script_xref(name:\"URL\", value:\"https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-2300\");\n script_xref(name:\"URL\", value:\"https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-update-guidance_05132019.pdf\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the Huawei EulerOS\n 'qemu' package(s) announced via the EulerOS-SA-2019-2300 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12126)\n\nMicroarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12127)\n\nMicroarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12130)\n\nMicroarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'qemu' package(s) on Huawei EulerOS V2.0SP8.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"EULEROS-2.0SP8\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-audio-alsa\", rpm:\"qemu-audio-alsa~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-audio-oss\", rpm:\"qemu-audio-oss~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-audio-pa\", rpm:\"qemu-audio-pa~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-audio-sdl\", rpm:\"qemu-audio-sdl~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-curl\", rpm:\"qemu-block-curl~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-dmg\", rpm:\"qemu-block-dmg~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-gluster\", rpm:\"qemu-block-gluster~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-iscsi\", rpm:\"qemu-block-iscsi~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-nfs\", rpm:\"qemu-block-nfs~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-rbd\", rpm:\"qemu-block-rbd~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-ssh\", rpm:\"qemu-block-ssh~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-common\", rpm:\"qemu-common~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-img\", rpm:\"qemu-img~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-kvm\", rpm:\"qemu-kvm~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-system-aarch64\", rpm:\"qemu-system-aarch64~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-system-aarch64-core\", rpm:\"qemu-system-aarch64-core~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ui-curses\", rpm:\"qemu-ui-curses~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ui-gtk\", rpm:\"qemu-ui-gtk~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ui-sdl\", rpm:\"qemu-ui-sdl~3.0.1~3.h3.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-27T18:35:47", "description": "The remote host is missing an update for the Huawei EulerOS\n ", "cvss3": {}, "published": "2020-01-23T00:00:00", "type": "openvas", "title": "Huawei EulerOS: Security Advisory for kvm (EulerOS-SA-2019-1611)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-23T00:00:00", "id": "OPENVAS:1361412562311220191611", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562311220191611", "sourceData": "# Copyright (C) 2020 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.1.2.2019.1611\");\n script_version(\"2020-01-23T12:16:56+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-23 12:16:56 +0000 (Thu, 23 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2020-01-23 12:16:56 +0000 (Thu, 23 Jan 2020)\");\n script_name(\"Huawei EulerOS: Security Advisory for kvm (EulerOS-SA-2019-1611)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2020 Greenbone Networks GmbH\");\n script_family(\"Huawei EulerOS Local Security Checks\");\n script_dependencies(\"gb_huawei_euleros_consolidation.nasl\");\n script_mandatory_keys(\"ssh/login/euleros\", \"ssh/login/rpms\", re:\"ssh/login/release=EULEROSVIRT-3\\.0\\.1\\.0\");\n\n script_xref(name:\"EulerOS-SA\", value:\"2019-1611\");\n script_xref(name:\"URL\", value:\"https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-1611\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the Huawei EulerOS\n 'kvm' package(s) announced via the EulerOS-SA-2019-1611 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer.(CVE-2018-12126)\n\nA flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer.CVE-2018-12130\n\nMicroprocessors use a load port subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPUs pipelines. Stale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel.(CVE-2018-12127)\n\nUncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.(CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'kvm' package(s) on Huawei EulerOS Virtualization 3.0.1.0.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"EULEROSVIRT-3.0.1.0\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"kvm\", rpm:\"kvm~4.4.11~30.014\", rls:\"EULEROSVIRT-3.0.1.0\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-03-30T16:55:09", "description": "The remote host is missing an update for the Huawei EulerOS\n ", "cvss3": {}, "published": "2020-01-23T00:00:00", "type": "openvas", "title": "Huawei EulerOS: Security Advisory for libvirt (EulerOS-SA-2019-2289)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-03-26T00:00:00", "id": "OPENVAS:1361412562311220192289", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562311220192289", "sourceData": "# Copyright (C) 2020 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.1.2.2019.2289\");\n script_version(\"2020-03-26T11:51:34+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-03-26 11:51:34 +0000 (Thu, 26 Mar 2020)\");\n script_tag(name:\"creation_date\", value:\"2020-01-23 12:45:37 +0000 (Thu, 23 Jan 2020)\");\n script_name(\"Huawei EulerOS: Security Advisory for libvirt (EulerOS-SA-2019-2289)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2020 Greenbone Networks GmbH\");\n script_family(\"Huawei EulerOS Local Security Checks\");\n script_dependencies(\"gb_huawei_euleros_consolidation.nasl\");\n script_mandatory_keys(\"ssh/login/euleros\", \"ssh/login/rpms\", re:\"ssh/login/release=EULEROS-2\\.0SP8\");\n\n script_xref(name:\"EulerOS-SA\", value:\"2019-2289\");\n script_xref(name:\"URL\", value:\"https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-2289\");\n script_xref(name:\"URL\", value:\"https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-update-guidance_05132019.pdf\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the Huawei EulerOS\n 'libvirt' package(s) announced via the EulerOS-SA-2019-2289 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12126)\n\nMicroarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12127)\n\nMicroarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12130)\n\nMicroarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on Huawei EulerOS V2.0SP8.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"EULEROS-2.0SP8\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-bash-completion\", rpm:\"libvirt-bash-completion~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client\", rpm:\"libvirt-client~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon\", rpm:\"libvirt-daemon~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-network\", rpm:\"libvirt-daemon-config-network~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-nwfilter\", rpm:\"libvirt-daemon-config-nwfilter~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-interface\", rpm:\"libvirt-daemon-driver-interface~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-network\", rpm:\"libvirt-daemon-driver-network~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nodedev\", rpm:\"libvirt-daemon-driver-nodedev~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nwfilter\", rpm:\"libvirt-daemon-driver-nwfilter~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-qemu\", rpm:\"libvirt-daemon-driver-qemu~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-secret\", rpm:\"libvirt-daemon-driver-secret~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage\", rpm:\"libvirt-daemon-driver-storage~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-core\", rpm:\"libvirt-daemon-driver-storage-core~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-disk\", rpm:\"libvirt-daemon-driver-storage-disk~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-iscsi\", rpm:\"libvirt-daemon-driver-storage-iscsi~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-iscsi-direct\", rpm:\"libvirt-daemon-driver-storage-iscsi-direct~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-logical\", rpm:\"libvirt-daemon-driver-storage-logical~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-mpath\", rpm:\"libvirt-daemon-driver-storage-mpath~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-scsi\", rpm:\"libvirt-daemon-driver-storage-scsi~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-kvm\", rpm:\"libvirt-daemon-kvm~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-libs\", rpm:\"libvirt-libs~4.7.0~5.h2.eulerosv2r8\", rls:\"EULEROS-2.0SP8\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:04", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "CentOS Update for qemu-guest-agent CESA-2019:1181 centos6 ", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310883052", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310883052", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.883052\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:00:54 +0000 (Thu, 16 May 2019)\");\n script_name(\"CentOS Update for qemu-guest-agent CESA-2019:1181 centos6 \");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"CentOS Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/centos\", \"ssh/login/rpms\", re:\"ssh/login/release=CentOS6\");\n\n script_xref(name:\"CESA\", value:\"2019:1181\");\n script_xref(name:\"URL\", value:\"http://lists.centos.org/pipermail/centos-announce/2019-May/023307.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'qemu-guest-agent'\n package(s) announced via the CESA-2019:1181 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Kernel-based Virtual Machine (KVM) is a full virtualization solution for\nLinux on a variety of architectures. The qemu-kvm packages provide the\nuser-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n * A flaw was found in the implementation of the 'fill buffer', a mechanism\nused by modern CPUs when a cache-miss is made on L1 CPU cache. If an\nattacker can generate a load operation that would create a page fault, the\nexecution will continue speculatively with incorrect data from the fill\nbuffer while the data is fetched from higher level caches. This response\ntime can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n * Modern Intel microprocessors implement hardware-level micro-optimizations\nto improve the performance of writing data back to CPU caches. The write\noperation is split into STA (STore Address) and STD (STore Data)\nsub-operations. These sub-operations allow the processor to hand-off\naddress generation logic into these sub-operations for optimized writes.\nBoth of these sub-operations write to a shared distributed processor\nstructure called the 'processor store buffer'. As a result, an unprivileged\nattacker could use this flaw to read private data resident within the CPU's\nprocessor store buffer. (CVE-2018-12126)\n\n * Microprocessors use a load port subcomponent to perform load operations\nfrom memory or IO. During a load operation, the load port receives data\nfrom the memory or IO subsystem and then provides the data to the CPU\nregisters and operations in the CPUs pipelines. Stale load operations\nresults are stored in the 'load port' table until overwritten by newer\noperations. Certain load-port operations triggered by an attacker can be\nused to reveal data about previous stale requests leaking data back to the\nattacker via a timing side-channel. (CVE-2018-12127)\n\n * Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable information\ndisclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS\nscore, acknowledgments, and other related information, refer to the CVE\npage(s) listed in the References section.\");\n\n script_tag(name:\"affected\", value:\"'qemu-guest-agent' package(s) on CentOS 6.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"CentOS6\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-guest-agent\", rpm:\"qemu-guest-agent~0.12.1.2~2.506.el6_10.3\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-img\", rpm:\"qemu-img~0.12.1.2~2.506.el6_10.3\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-kvm\", rpm:\"qemu-kvm~0.12.1.2~2.506.el6_10.3\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-kvm-tools\", rpm:\"qemu-kvm-tools~0.12.1.2~2.506.el6_10.3\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-29T19:29:15", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "Debian LTS: Security Advisory for linux-4.9 (DLA-1787-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-29T00:00:00", "id": "OPENVAS:1361412562310891787", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310891787", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.891787\");\n script_version(\"2020-01-29T08:22:52+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-29 08:22:52 +0000 (Wed, 29 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:00:21 +0000 (Thu, 16 May 2019)\");\n script_name(\"Debian LTS: Security Advisory for linux-4.9 (DLA-1787-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Debian Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/debian_linux\", \"ssh/login/packages\", re:\"ssh/login/release=DEB8\");\n\n script_xref(name:\"URL\", value:\"https://lists.debian.org/debian-lts-announce/2019/05/msg00017.html\");\n script_xref(name:\"URL\", value:\"https://security-tracker.debian.org/tracker/DLA-1787-1\");\n script_xref(name:\"URL\", value:\"https://bugs.debian.org/928125\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'linux-4.9'\n package(s) announced via the DLA-1787-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Multiple researchers have discovered vulnerabilities in the way the\nIntel processor designs have implemented speculative forwarding of data\nfilled into temporary microarchitectural structures (buffers). This\nflaw could allow an attacker controlling an unprivileged process to\nread sensitive information, including from the kernel and all other\nprocesses running on the system or cross guest/host boundaries to read\nhost memory.\n\nSee the references for more details.\n\nTo fully resolve these vulnerabilities it is also necessary to install\nupdated CPU microcode. An updated intel-microcode package (only\navailable in Debian non-free) will be provided via a separate DLA. The\nupdated CPU microcode may also be available as part of a system firmware\n('BIOS') update.\n\nIn addition, this update includes a fix for a regression causing\ndeadlocks inside the loopback driver, which was introduced by the update\nto 4.9.168 in the last security update.\");\n\n script_tag(name:\"affected\", value:\"'linux-4.9' package(s) on Debian Linux.\");\n\n script_tag(name:\"solution\", value:\"For Debian 8 'Jessie', these problems have been fixed in version\n4.9.168-1+deb9u2~deb8u1.\n\nWe recommend that you upgrade your linux-4.9 packages.\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nres = \"\";\nreport = \"\";\nif(!isnull(res = isdpkgvuln(pkg:\"linux-compiler-gcc-4.9-arm\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-doc-4.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-all\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-all-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-all-armel\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-all-armhf\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-all-i386\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-common\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-common-rt\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.7-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-all\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-all-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-all-armel\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-all-armhf\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-all-i386\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-common\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-common-rt\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.8-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-all\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-all-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-all-armel\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-all-armhf\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-all-i386\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-common\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-common-rt\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-0.bpo.9-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.7-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.8-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-686\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-armmp\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-armmp-lpae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-marvell\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-rt-686-pae\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-rt-amd64\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-0.bpo.9-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-kbuild-4.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-manual-4.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-perf-4.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-source-4.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-0.bpo.7\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-0.bpo.8\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-0.bpo.9\", ver:\"4.9.168-1+deb9u2~deb8u1\", rls:\"DEB8\"))) {\n report += res;\n}\n\nif(report != \"\") {\n security_message(data:report);\n} else if(__pkg_match) {\n exit(99);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-31T16:29:16", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2020-01-09T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1806-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852940", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852940", "sourceData": "# Copyright (C) 2020 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852940\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2020-01-09 09:46:46 +0000 (Thu, 09 Jan 2020)\");\n script_name(\"openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1806-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2020 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap15\\.1\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1806-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-07/msg00052.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'ucode-intel'\n package(s) announced via the openSUSE-SU-2019:1806-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for ucode-intel fixes the following issues:\n\n This update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the CPU Microcode adjustments for the software\n mitigations.\n\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.1:\n\n zypper in -t patch openSUSE-2019-1806=1\");\n\n script_tag(name:\"affected\", value:\"'ucode-intel' package(s) on openSUSE Leap 15.1.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap15.1\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel\", rpm:\"ucode-intel~20190618~lp151.2.3.1\", rls:\"openSUSELeap15.1\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:09", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "Debian Security Advisory DSA 4447-1 (intel-microcode - security update)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310704447", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310704447", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.704447\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:00:06 +0000 (Thu, 16 May 2019)\");\n script_name(\"Debian Security Advisory DSA 4447-1 (intel-microcode - security update)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Debian Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/debian_linux\", \"ssh/login/packages\", re:\"ssh/login/release=DEB9\");\n\n script_xref(name:\"URL\", value:\"https://www.debian.org/security/2019/dsa-4447.html\");\n script_xref(name:\"URL\", value:\"https://security-tracker.debian.org/tracker/DSA-4447-1\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'intel-microcode'\n package(s) announced via the DSA-4447-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update ships updated CPU microcode for most types of Intel CPUs. It\nprovides mitigations for the MSBDS, MFBDS, MLPDS and MDSUM hardware\nvulnerabilities.\n\nTo fully resolve these vulnerabilities it is also necessary to update\nthe Linux kernel packages as released in DSA 4444.\");\n\n script_tag(name:\"affected\", value:\"'intel-microcode' package(s) on Debian Linux.\");\n\n script_tag(name:\"solution\", value:\"For the stable distribution (stretch), these problems have been fixed in\nversion 3.20190514.1~deb9u1.\n\nWe recommend that you upgrade your intel-microcode packages.\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nres = \"\";\nreport = \"\";\nif(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.1~deb9u1\", rls:\"DEB9\"))) {\n report += res;\n}\n\nif(report != \"\") {\n security_message(data:report);\n} else if(__pkg_match) {\n exit(99);\n}\n\nexit(0);", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-03-30T16:54:05", "description": "The remote host is missing an update for the Huawei EulerOS\n ", "cvss3": {}, "published": "2020-01-23T00:00:00", "type": "openvas", "title": "Huawei EulerOS: Security Advisory for libvirt (EulerOS-SA-2019-2210)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-03-26T00:00:00", "id": "OPENVAS:1361412562311220192210", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562311220192210", "sourceData": "# Copyright (C) 2020 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.1.2.2019.2210\");\n script_version(\"2020-03-26T11:51:34+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-03-26 11:51:34 +0000 (Thu, 26 Mar 2020)\");\n script_tag(name:\"creation_date\", value:\"2020-01-23 12:39:53 +0000 (Thu, 23 Jan 2020)\");\n script_name(\"Huawei EulerOS: Security Advisory for libvirt (EulerOS-SA-2019-2210)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2020 Greenbone Networks GmbH\");\n script_family(\"Huawei EulerOS Local Security Checks\");\n script_dependencies(\"gb_huawei_euleros_consolidation.nasl\");\n script_mandatory_keys(\"ssh/login/euleros\", \"ssh/login/rpms\", re:\"ssh/login/release=EULEROS-2\\.0SP5\");\n\n script_xref(name:\"EulerOS-SA\", value:\"2019-2210\");\n script_xref(name:\"URL\", value:\"https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-2210\");\n script_xref(name:\"URL\", value:\"https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-update-guidance_05132019.pdf\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the Huawei EulerOS\n 'libvirt' package(s) announced via the EulerOS-SA-2019-2210 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12126)\n\nMicroarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12127)\n\nMicroarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2018-12130)\n\nMicroarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: [link moved to references](CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on Huawei EulerOS V2.0SP5.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"EULEROS-2.0SP5\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt\", rpm:\"libvirt~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client\", rpm:\"libvirt-client~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon\", rpm:\"libvirt-daemon~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-network\", rpm:\"libvirt-daemon-config-network~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-nwfilter\", rpm:\"libvirt-daemon-config-nwfilter~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-interface\", rpm:\"libvirt-daemon-driver-interface~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-lxc\", rpm:\"libvirt-daemon-driver-lxc~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-network\", rpm:\"libvirt-daemon-driver-network~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nodedev\", rpm:\"libvirt-daemon-driver-nodedev~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nwfilter\", rpm:\"libvirt-daemon-driver-nwfilter~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-qemu\", rpm:\"libvirt-daemon-driver-qemu~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-secret\", rpm:\"libvirt-daemon-driver-secret~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage\", rpm:\"libvirt-daemon-driver-storage~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-core\", rpm:\"libvirt-daemon-driver-storage-core~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-disk\", rpm:\"libvirt-daemon-driver-storage-disk~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-gluster\", rpm:\"libvirt-daemon-driver-storage-gluster~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-iscsi\", rpm:\"libvirt-daemon-driver-storage-iscsi~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-logical\", rpm:\"libvirt-daemon-driver-storage-logical~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-mpath\", rpm:\"libvirt-daemon-driver-storage-mpath~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-rbd\", rpm:\"libvirt-daemon-driver-storage-rbd~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-scsi\", rpm:\"libvirt-daemon-driver-storage-scsi~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-kvm\", rpm:\"libvirt-daemon-kvm~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-libs\", rpm:\"libvirt-libs~3.9.0~14.7.h6.eulerosv2r7\", rls:\"EULEROS-2.0SP5\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-03-14T17:08:46", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-21T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1408-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852507", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852507", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852507\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-21 02:01:10 +0000 (Tue, 21 May 2019)\");\n script_name(\"openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1408-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap42\\.3\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1408-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-05/msg00042.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'ucode-intel'\n package(s) announced via the openSUSE-SU-2019:1408-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for ucode-intel fixes the following issues:\n\n This update contains the Intel QSR 2019.1 Microcode release (boo#1111331\n CVE-2018-12126 CVE-2018-12130 CVE-2018-12127 CVE-2019-11091)\n\n Release notes:\n\n - Processor Identifier Version Products\n\n - Model Stepping F-MO-S/PI Old->New\n\n - ---- new platforms ----------------------------------------\n\n - CLX-SP B1 6-55-7/bf 05000021 Xeon Scalable Gen2\n\n - ---- updated platforms ------------------------------------\n\n - SNB D2/G1/Q0 6-2a-7/12 0000002e->0000002f Core Gen2\n\n - IVB E1/L1 6-3a-9/12 00000020->00000021 Core Gen3\n\n - HSW C0 6-3c-3/32 00000025->00000027 Core Gen4\n\n - BDW-U/Y E0/F0 6-3d-4/c0 0000002b->0000002d Core Gen5\n\n - IVB-E/EP C1/M1/S1 6-3e-4/ed 0000042e->0000042f Core Gen3 X Series,\n Xeon E5 v2\n\n - IVB-EX D1 6-3e-7/ed 00000714->00000715 Xeon E7 v2\n\n - HSX-E/EP Cx/M1 6-3f-2/6f 00000041->00000043 Core Gen4 X series,\n Xeon E5 v3\n\n - HSX-EX E0 6-3f-4/80 00000013->00000014 Xeon E7 v3\n\n - HSW-U C0/D0 6-45-1/72 00000024->00000025 Core Gen4\n\n - HSW-H C0 6-46-1/32 0000001a->0000001b Core Gen4\n\n - BDW-H/E3 E0/G0 6-47-1/22 0000001e->00000020 Core Gen5\n\n - SKL-U/Y D0/K1 6-4e-3/c0 000000c6->000000cc Core Gen6\n\n - SKX-SP H0/M0/U0 6-55-4/b7 0200005a->0000005e Xeon Scalable\n\n - SKX-D M1 6-55-4/b7 0200005a->0000005e Xeon D-21xx\n\n - BDX-DE V1 6-56-2/10 00000019->0000001a Xeon D-1520/40\n\n - BDX-DE V2/3 6-56-3/10 07000016->07000017 Xeon\n D-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19\n\n - BDX-DE Y0 6-56-4/10 0f000014->0f000015 Xeon\n D-1557/59/67/71/77/81/87\n\n - BDX-NS A0 6-56-5/10 0e00000c->0e00000d Xeon\n D-1513N/23/33/43/53\n\n - APL D0 6-5c-9/03 00000036->00000038 Pentium N/J4xxx,\n Celeron N/J3xxx, Atom x5/7-E39xx\n\n - SKL-H/S R0/N0 6-5e-3/36 000000c6->000000cc Core Gen6, Xeon E3 v5\n\n - DNV B0 6-5f-1/01 00000024->0000002e Atom Processor C\n Series\n\n - GLK B0 6-7a-1/01 0000002c->0000002e Pentium Silver\n N/J5xxx, Celeron N/J4xxx\n\n - AML-Y22 H0 6-8e-9/10 0000009e->000000b4 Core Gen8 Mobile\n\n - KBL-U/Y H0 6-8e-9/c0 0000009a->000000b4 Core Gen7 Mobile\n\n - CFL-U43e D0 6-8e-a/c0 0000009e->000000b4 Core Gen8 Mobile\n\n - WHL-U W0 6-8e-b/d0 000000a4->000000b8 Core Gen8 Mobile\n\n - WHL-U V0 6-8e-d/94 000000b2->000000b8 Core Gen8 Mobile\n\n - KBL-G/H/S/E3 B0 6-9e-9/2a 0000009a->00000 ...\n\n Description truncated. Please see the references for more information.\");\n\n script_tag(name:\"affected\", value:\"'ucode-intel' package(s) on openSUSE Leap 42.3.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap42.3\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel\", rpm:\"ucode-intel~20190514~32.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel-blob\", rpm:\"ucode-intel-blob~20190514~32.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel-debuginfo\", rpm:\"ucode-intel-debuginfo~20190514~32.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel-debugsource\", rpm:\"ucode-intel-debugsource~20190514~32.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-31T16:54:11", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-17T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1402-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852504", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852504", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852504\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-17 02:00:58 +0000 (Fri, 17 May 2019)\");\n script_name(\"openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1402-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap15\\.0\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1402-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-05/msg00039.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'ucode-intel'\n package(s) announced via the openSUSE-SU-2019:1402-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for ucode-intel fixes the following issues:\n\n This update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the CPU Microcode adjustments for the software\n mitigations.\n\n\n Release notes:\n\n - Processor Identifier Version Products\n\n - Model Stepping F-MO-S/PI Old->New\n\n - ---- new platforms ----------------------------------------\n\n - CLX-SP B1 6-55-7/bf 05000021 Xeon Scalable Gen2\n\n - ---- updated platforms ------------------------------------\n\n - SNB D2/G1/Q0 6-2a-7/12 0000002e->0000002f Core Gen2\n\n - IVB E1/L1 6-3a-9/12 00000020->00000021 Core Gen3\n\n - HSW C0 6-3c-3/32 00000025->00000027 Core Gen4\n\n - BDW-U/Y E0/F0 6-3d-4/c0 0000002b->0000002d Core Gen5\n\n - IVB-E/EP C1/M1/S1 6-3e-4/ed 0000042e->0000042f Core Gen3 X Series,\n Xeon E5 v2\n\n - IVB-EX D1 6-3e-7/ed 00000714->00000715 Xeon E7 v2\n\n - HSX-E/EP Cx/M1 6-3f-2/6f 00000041->00000043 Core Gen4 X series,\n Xeon E5 v3\n\n - HSX-EX E0 6-3f-4/80 00000013->00000014 Xeon E7 v3\n\n - HSW-U C0/D0 6-45-1/72 00000024->00000025 Core Gen4\n\n - HSW-H C0 6-46-1/32 0000001a->0000001b Core Gen4\n\n - BDW-H/E3 E0/G0 6-47-1/22 0000001e->00000020 Core Gen5\n\n - SKL-U/Y D0/K1 6-4e-3/c0 000000c6->000000cc Core Gen6\n\n - SKX-SP H0/M0/U0 6-55-4/b7 0200005a->0000005e Xeon Scalable\n\n - SKX-D M1 6-55-4/b7 0200005a->0000005e Xeon D-21xx\n\n - BDX-DE V1 6-56-2/10 00000019->0000001a Xeon D-1520/40\n\n - BDX-DE V2/3 6-56-3/10 07000016->07000017 Xeon\n D-1518/19/21/27/28/31/33/37/41/48, Pentium D1507/08/09/17/19\n\n - BDX-DE Y0 6-56-4/10 0f000014->0f000015 Xeon\n D-1557/59/67/71/77/81/87\n\n - BDX-NS A0 6-56-5/10 0e00000c->0e00000d Xeon\n D-1513N/23/33/43/53\n\n - APL D0 6-5c-9/03 00000036->00000038 Pentium N/J4xxx,\n Celeron N/J3xxx, Atom x5/7-E39xx\n\n - SKL-H/S R0/N0 6-5e-3/36 0000 ...\n\n Description truncated. Please see the references for more information.\");\n\n script_tag(name:\"affected\", value:\"'ucode-intel' package(s) on openSUSE Leap 15.0.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap15.0\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel\", rpm:\"ucode-intel~20190507~lp150.2.18.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-09-05T14:52:07", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "CentOS Update for kernel CESA-2019:1168 centos7 ", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-09-05T00:00:00", "id": "OPENVAS:1361412562310883055", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310883055", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.883055\");\n script_version(\"2019-09-05T05:22:48+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-09-05 05:22:48 +0000 (Thu, 05 Sep 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:01:04 +0000 (Thu, 16 May 2019)\");\n script_name(\"CentOS Update for kernel CESA-2019:1168 centos7 \");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"CentOS Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/centos\", \"ssh/login/rpms\", re:\"ssh/login/release=CentOS7\");\n\n script_xref(name:\"CESA\", value:\"2019:1168\");\n script_xref(name:\"URL\", value:\"http://lists.centos.org/pipermail/centos-announce/2019-May/023314.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'kernel'\n package(s) announced via the CESA-2019:1168 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"The kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es):\n\n * A flaw was found in the implementation of the 'fill buffer', a mechanism\nused by modern CPUs when a cache-miss is made on L1 CPU cache. If an\nattacker can generate a load operation that would create a page fault, the\nexecution will continue speculatively with incorrect data from the fill\nbuffer while the data is fetched from higher level caches. This response\ntime can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n * Modern Intel microprocessors implement hardware-level micro-optimizations\nto improve the performance of writing data back to CPU caches. The write\noperation is split into STA (STore Address) and STD (STore Data)\nsub-operations. These sub-operations allow the processor to hand-off\naddress generation logic into these sub-operations for optimized writes.\nBoth of these sub-operations write to a shared distributed processor\nstructure called the 'processor store buffer'. As a result, an\nunprivileged attacker could use this flaw to read private data resident\nwithin the CPU's processor store buffer. (CVE-2018-12126)\n\n * Microprocessors use a load port subcomponent to perform load operations\nfrom memory or IO. During a load operation, the load port receives data\nfrom the memory or IO subsystem and then provides the data to the CPU\nregisters and operations in the CPUs pipelines. Stale load operations\nresults are stored in the 'load port' table until overwritten by newer\noperations. Certain load-port operations triggered by an attacker can be\nused to reveal data about previous stale requests leaking data back to the\nattacker via a timing side-channel. (CVE-2018-12127)\n\n * Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable information\ndisclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS\nscore, acknowledgments, and other related information, refer to the CVE\npage(s) listed in the References section.\");\n\n script_tag(name:\"affected\", value:\"'kernel' package(s) on CentOS 7.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"CentOS7\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"bpftool\", rpm:\"bpftool~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel\", rpm:\"kernel~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-abi-whitelists\", rpm:\"kernel-abi-whitelists~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-debug\", rpm:\"kernel-debug~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-debug-devel\", rpm:\"kernel-debug-devel~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-devel\", rpm:\"kernel-devel~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-doc\", rpm:\"kernel-doc~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-headers\", rpm:\"kernel-headers~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-tools\", rpm:\"kernel-tools~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-tools-libs\", rpm:\"kernel-tools-libs~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"kernel-tools-libs-devel\", rpm:\"kernel-tools-libs-devel~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"perf\", rpm:\"perf~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"python-perf\", rpm:\"python-perf~3.10.0~957.12.2.el7\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:05", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "CentOS Update for qemu-img CESA-2019:1178 centos7 ", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310883051", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310883051", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.883051\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:00:51 +0000 (Thu, 16 May 2019)\");\n script_name(\"CentOS Update for qemu-img CESA-2019:1178 centos7 \");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"CentOS Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/centos\", \"ssh/login/rpms\", re:\"ssh/login/release=CentOS7\");\n\n script_xref(name:\"CESA\", value:\"2019:1178\");\n script_xref(name:\"URL\", value:\"http://lists.centos.org/pipermail/centos-announce/2019-May/023312.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'qemu-img'\n package(s) announced via the CESA-2019:1178 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Kernel-based Virtual Machine (KVM) is a full virtualization solution for\nLinux on a variety of architectures. The qemu-kvm packages provide the\nuser-space component for running virtual machines that use KVM.\n\nSecurity Fix(es):\n\n * A flaw was found in the implementation of the 'fill buffer', a mechanism\nused by modern CPUs when a cache-miss is made on L1 CPU cache. If an\nattacker can generate a load operation that would create a page fault, the\nexecution will continue speculatively with incorrect data from the fill\nbuffer while the data is fetched from higher level caches. This response\ntime can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n * Modern Intel microprocessors implement hardware-level micro-optimizations\nto improve the performance of writing data back to CPU caches. The write\noperation is split into STA (STore Address) and STD (STore Data)\nsub-operations. These sub-operations allow the processor to hand-off\naddress generation logic into these sub-operations for optimized writes.\nBoth of these sub-operations write to a shared distributed processor\nstructure called the 'processor store buffer'. As a result, an unprivileged\nattacker could use this flaw to read private data resident within the CPU's\nprocessor store buffer. (CVE-2018-12126)\n\n * Microprocessors use a load port subcomponent to perform load operations\nfrom memory or IO. During a load operation, the load port receives data\nfrom the memory or IO subsystem and then provides the data to the CPU\nregisters and operations in the CPUs pipelines. Stale load operations\nresults are stored in the 'load port' table until overwritten by newer\noperations. Certain load-port operations triggered by an attacker can be\nused to reveal data about previous stale requests leaking data back to the\nattacker via a timing side-channel. (CVE-2018-12127)\n\n * Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable information\ndisclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS\nscore, acknowledgments, and other related information, refer to the CVE\npage(s) listed in the References section.\");\n\n script_tag(name:\"affected\", value:\"'qemu-img' package(s) on CentOS 7.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"CentOS7\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-img\", rpm:\"qemu-img~1.5.3~160.el7_6.2\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-kvm\", rpm:\"qemu-kvm~1.5.3~160.el7_6.2\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-kvm-common\", rpm:\"qemu-kvm-common~1.5.3~160.el7_6.2\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-kvm-tools\", rpm:\"qemu-kvm-tools~1.5.3~160.el7_6.2\", rls:\"CentOS7\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:04", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "CentOS Update for libvirt CESA-2019:1180 centos6 ", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310883053", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310883053", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.883053\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:00:57 +0000 (Thu, 16 May 2019)\");\n script_name(\"CentOS Update for libvirt CESA-2019:1180 centos6 \");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"CentOS Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/centos\", \"ssh/login/rpms\", re:\"ssh/login/release=CentOS6\");\n\n script_xref(name:\"CESA\", value:\"2019:1180\");\n script_xref(name:\"URL\", value:\"http://lists.centos.org/pipermail/centos-announce/2019-May/023308.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'libvirt'\n package(s) announced via the CESA-2019:1180 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"The libvirt library contains a C API for managing and interacting with the\nvirtualization capabilities of Linux and other operating systems. In\naddition, libvirt provides tools for remote management of virtualized\nsystems.\n\nSecurity Fix(es):\n\n * A flaw was found in the implementation of the 'fill buffer', a mechanism\nused by modern CPUs when a cache-miss is made on L1 CPU cache. If an\nattacker can generate a load operation that would create a page fault, the\nexecution will continue speculatively with incorrect data from the fill\nbuffer while the data is fetched from higher level caches. This response\ntime can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n * Modern Intel microprocessors implement hardware-level micro-optimizations\nto improve the performance of writing data back to CPU caches. The write\noperation is split into STA (STore Address) and STD (STore Data)\nsub-operations. These sub-operations allow the processor to hand-off\naddress generation logic into these sub-operations for optimized writes.\nBoth of these sub-operations write to a shared distributed processor\nstructure called the 'processor store buffer'. As a result, an unprivileged\nattacker could use this flaw to read private data resident within the CPU's\nprocessor store buffer. (CVE-2018-12126)\n\n * Microprocessors use a load port subcomponent to perform load operations\nfrom memory or IO. During a load operation, the load port receives data\nfrom the memory or IO subsystem and then provides the data to the CPU\nregisters and operations in the CPUs pipelines. Stale load operations\nresults are stored in the 'load port' table until overwritten by newer\noperations. Certain load-port operations triggered by an attacker can be\nused to reveal data about previous stale requests leaking data back to the\nattacker via a timing side-channel. (CVE-2018-12127)\n\n * Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable information\ndisclosure via a side channel with local access. (CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS\nscore, acknowledgments, and other related information, refer to the CVE\npage(s) listed in the References section.\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on CentOS 6.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"CentOS6\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt\", rpm:\"libvirt~0.10.2~64.el6_10.1\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client\", rpm:\"libvirt-client~0.10.2~64.el6_10.1\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-devel\", rpm:\"libvirt-devel~0.10.2~64.el6_10.1\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-python\", rpm:\"libvirt-python~0.10.2~64.el6_10.1\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-lock-sanlock\", rpm:\"libvirt-lock-sanlock~0.10.2~64.el6_10.1\", rls:\"CentOS6\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-31T16:47:37", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-07-25T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1805-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852638", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852638", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852638\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-07-25 02:01:52 +0000 (Thu, 25 Jul 2019)\");\n script_name(\"openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1805-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap15\\.0\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1805-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-07/msg00053.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'ucode-intel'\n package(s) announced via the openSUSE-SU-2019:1805-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for ucode-intel fixes the following issues:\n\n This update contains the Intel QSR 2019.1 Microcode release (bsc#1111331)\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Samling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the CPU Microcode adjustments for the software\n mitigations.\n\n Release notes:\n\n - --- updated platforms ------------------------------------ SNB-E/EN/EP\n C1/M0 6-2d-6/6d 0000061d->0000061f Xeon E3/E5, Core X SNB-E/EN/EP\n C2/M1 6-2d-7/6d 00000714->00000718 Xeon E3/E5, Core X\n\n This update was imported from the SUSE:SLE-15:Update update project.\n\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1805=1\");\n\n script_tag(name:\"affected\", value:\"'ucode-intel' package(s) on openSUSE Leap 15.0.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap15.0\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel\", rpm:\"ucode-intel~20190618~lp150.2.24.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:03", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-23T00:00:00", "type": "openvas", "title": "Ubuntu Update for intel-microcode USN-3977-2", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310844021", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310844021", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.844021\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12130\", \"CVE-2018-12127\", \"CVE-2018-12126\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-23 02:00:30 +0000 (Thu, 23 May 2019)\");\n script_name(\"Ubuntu Update for intel-microcode USN-3977-2\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Ubuntu Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/ubuntu_linux\", \"ssh/login/packages\", re:\"ssh/login/release=(UBUNTU18\\.10|UBUNTU19\\.04|UBUNTU18\\.04 LTS|UBUNTU16\\.04 LTS)\");\n\n script_xref(name:\"USN\", value:\"3977-2\");\n script_xref(name:\"URL\", value:\"https://lists.ubuntu.com/archives/ubuntu-security-announce/2019-May/004916.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'intel-microcode'\n package(s) announced via the USN-3977-2 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"USN-3977-1 provided mitigations for Microarchitectural Data Sampling\n(MDS) vulnerabilities in Intel Microcode for a large number of Intel\nprocessor families. This update provides the corresponding updated\nmicrocode mitigations for Intel Cherry Trail and Bay Trail processor\nfamilies.\n\nOriginal advisory details:\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Giorgi Maisuradze, Dan\nHorea Lutas, Andrei Lutas, Volodymyr Pikhur, Stephan van Schaik, Alyssa\nMilburn, Sebastian \u00d6sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos,\nCristiano Giuffrida, Moritz Lipp, Michael Schwarz, and Daniel Gruss\ndiscovered that memory previously stored in microarchitectural fill buffers\nof an Intel CPU core may be exposed to a malicious process that is\nexecuting on the same CPU core. A local attacker could use this to expose\nsensitive information. (CVE-2018-12130)\n\nBrandon Falk, Ke Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Stephan\nvan Schaik, Alyssa Milburn, Sebastian \u00d6sterlund, Pietro Frigo, Kaveh\nRazavi, Herbert Bos, and Cristiano Giuffrida discovered that memory\npreviously stored in microarchitectural load ports of an Intel CPU core may\nbe exposed to a malicious process that is executing on the same CPU core. A\nlocal attacker could use this to expose sensitive information.\n(CVE-2018-12127)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Marina Minkin, Daniel\nMoghimi, Moritz Lipp, Michael Schwarz, Jo Van Bulck, Daniel Genkin, Daniel\nGruss, Berk Sunar, Frank Piessens, and Yuval Yarom discovered that memory\npreviously stored in microarchitectural store buffers of an Intel CPU core\nmay be exposed to a malicious process that is executing on the same CPU\ncore. A local attacker could use this to expose sensitive information.\n(CVE-2018-12126)\n\nKe Sun, Henrique Kawakami, Kekai Hu, Rodrigo Branco, Volodrmyr Pikhur,\nMoritz Lipp, Michael Schwarz, Daniel Gruss, Stephan van Schaik, Alyssa\nMilburn, Sebastian \u00d6sterlund, Pietro Frigo, Kaveh Razavi, Herbert Bos, and\nCristiano Giuffrida discovered that uncacheable memory previously stored in\nmicroarchitectural buffers of an Intel CPU core may be exposed to a\nmalicious process that is executing on the same CPU core. A local attacker\ncould use this to expose sensitive information. (CVE-2019-11091)\");\n\n script_tag(name:\"affected\", value:\"'intel-microcode' package(s) on Ubuntu 19.04, Ubuntu 18.10, Ubuntu 18.04 LTS, Ubuntu 16.04 LTS.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nrelease = dpkg_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"UBUNTU18.10\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.18.10.2\", rls:\"UBUNTU18.10\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU19.04\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.19.04.3\", rls:\"UBUNTU19.04\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU18.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.18.04.3\", rls:\"UBUNTU18.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nif(release == \"UBUNTU16.04 LTS\") {\n\n if(!isnull(res = isdpkgvuln(pkg:\"intel-microcode\", ver:\"3.20190514.0ubuntu0.16.04.2\", rls:\"UBUNTU16.04 LTS\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if (__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2019-06-05T01:41:07", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "openvas", "title": "Debian Security Advisory DSA 4444-1 (linux - security update)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2019-06-04T00:00:00", "id": "OPENVAS:1361412562310704444", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310704444", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.704444\");\n script_version(\"2019-06-04T06:44:21+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2019-06-04 06:44:21 +0000 (Tue, 04 Jun 2019)\");\n script_tag(name:\"creation_date\", value:\"2019-05-16 02:00:12 +0000 (Thu, 16 May 2019)\");\n script_name(\"Debian Security Advisory DSA 4444-1 (linux - security update)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"Debian Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/debian_linux\", \"ssh/login/packages\", re:\"ssh/login/release=DEB9\");\n\n script_xref(name:\"URL\", value:\"https://www.debian.org/security/2019/dsa-4444.html\");\n script_xref(name:\"URL\", value:\"https://security-tracker.debian.org/tracker/DSA-4444-1\");\n script_xref(name:\"URL\", value:\"https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'linux'\n package(s) announced via the DSA-4444-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"Multiple researchers have discovered vulnerabilities in the way the\nIntel processor designs have implemented speculative forwarding of data\nfilled into temporary microarchitectural structures (buffers). This\nflaw could allow an attacker controlling an unprivileged process to\nread sensitive information, including from the kernel and all other\nprocesses running on the system or cross guest/host boundaries to read\nhost memory.\n\nSee the references for more details.\n\nTo fully resolve these vulnerabilities it is also necessary to install\nupdated CPU microcode. An updated intel-microcode package (only\navailable in Debian non-free) will be provided via a separate DSA. The\nupdated CPU microcode may also be available as part of a system firmware\n('BIOS') update.\n\nIn addition, this update includes a fix for a regression causing\ndeadlocks inside the loopback driver, which was introduced by the update\nto 4.9.168 in the last Stretch point release.\");\n\n script_tag(name:\"affected\", value:\"'linux' package(s) on Debian Linux.\");\n\n script_tag(name:\"solution\", value:\"For the stable distribution (stretch), these problems have been fixed in\nversion 4.9.168-1+deb9u2.\n\nWe recommend that you upgrade your linux packages.\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-deb.inc\");\n\nres = \"\";\nreport = \"\";\nif(!isnull(res = isdpkgvuln(pkg:\"hyperv-daemons\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"libcpupower-dev\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"libcpupower1\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"libusbip-dev\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-compiler-gcc-6-arm\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-compiler-gcc-6-s390\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-compiler-gcc-6-x86\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-cpupower\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-doc-4.9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-3-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-4-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-5-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-6-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-7-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-8-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-armel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-armhf\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-i386\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-mips\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-mips64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-mipsel\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-ppc64el\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-all-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-common\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-common-rt\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-headers-4.9.0-9-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-3-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-4-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-5-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-6-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-7-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-8-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-4kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-4kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-5kc-malta\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-5kc-malta-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-686\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-686-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-arm64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-arm64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-armmp\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-armmp-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-armmp-lpae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-armmp-lpae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-loongson-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-loongson-3-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-marvell\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-marvell-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-octeon\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-octeon-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-powerpc64le\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-powerpc64le-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-rt-686-pae\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-rt-686-pae-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-rt-amd64\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-rt-amd64-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-s390x\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-image-4.9.0-9-s390x-dbg\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-kbuild-4.9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-libc-dev\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-manual-4.9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-perf-4.9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-source-4.9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-3\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-4\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-5\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-6\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-7\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-8\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"linux-support-4.9.0-9\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\nif(!isnull(res = isdpkgvuln(pkg:\"usbip\", ver:\"4.9.168-1+deb9u2\", rls:\"DEB9\"))) {\n report += res;\n}\n\nif(report != \"\") {\n security_message(data:report);\n} else if(__pkg_match) {\n exit(99);\n}\n\nexit(0);", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-31T16:47:01", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-06-04T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for libvirt (openSUSE-SU-2019:1505-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852535", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852535", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852535\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-06-04 02:00:54 +0000 (Tue, 04 Jun 2019)\");\n script_name(\"openSUSE: Security Advisory for libvirt (openSUSE-SU-2019:1505-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap15\\.0\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1505-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-06/msg00014.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'libvirt'\n package(s) announced via the openSUSE-SU-2019:1505-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for libvirt fixes the following issues:\n\n Four new speculative execution information leak issues have been\n identified in Intel CPUs. (bsc#1111331)\n\n - CVE-2018-12126: Microarchitectural Store Buffer Data Sampling (MSBDS)\n\n - CVE-2018-12127: Microarchitectural Fill Buffer Data Sampling (MFBDS)\n\n - CVE-2018-12130: Microarchitectural Load Port Data Sampling (MLPDS)\n\n - CVE-2019-11091: Microarchitectural Data Sampling Uncacheable Memory\n (MDSUM)\n\n These updates contain the libvirt adjustments, that pass through the new\n 'md-clear' CPU flag (bsc#1135273).\n\n This update was imported from the SUSE:SLE-15:Update update project.\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1505=1\");\n\n script_tag(name:\"affected\", value:\"'libvirt' package(s) on openSUSE Leap 15.0.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap15.0\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt\", rpm:\"libvirt~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-admin\", rpm:\"libvirt-admin~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-admin-debuginfo\", rpm:\"libvirt-admin-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client\", rpm:\"libvirt-client~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client-debuginfo\", rpm:\"libvirt-client-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon\", rpm:\"libvirt-daemon~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-network\", rpm:\"libvirt-daemon-config-network~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-config-nwfilter\", rpm:\"libvirt-daemon-config-nwfilter~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-debuginfo\", rpm:\"libvirt-daemon-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-interface\", rpm:\"libvirt-daemon-driver-interface~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-interface-debuginfo\", rpm:\"libvirt-daemon-driver-interface-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-lxc\", rpm:\"libvirt-daemon-driver-lxc~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-lxc-debuginfo\", rpm:\"libvirt-daemon-driver-lxc-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-network\", rpm:\"libvirt-daemon-driver-network~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-network-debuginfo\", rpm:\"libvirt-daemon-driver-network-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nodedev\", rpm:\"libvirt-daemon-driver-nodedev~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nodedev-debuginfo\", rpm:\"libvirt-daemon-driver-nodedev-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nwfilter\", rpm:\"libvirt-daemon-driver-nwfilter~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-nwfilter-debuginfo\", rpm:\"libvirt-daemon-driver-nwfilter-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-qemu\", rpm:\"libvirt-daemon-driver-qemu~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-qemu-debuginfo\", rpm:\"libvirt-daemon-driver-qemu-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-secret\", rpm:\"libvirt-daemon-driver-secret~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-secret-debuginfo\", rpm:\"libvirt-daemon-driver-secret-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage\", rpm:\"libvirt-daemon-driver-storage~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-core\", rpm:\"libvirt-daemon-driver-storage-core~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-core-debuginfo\", rpm:\"libvirt-daemon-driver-storage-core-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-disk\", rpm:\"libvirt-daemon-driver-storage-disk~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-disk-debuginfo\", rpm:\"libvirt-daemon-driver-storage-disk-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-iscsi\", rpm:\"libvirt-daemon-driver-storage-iscsi~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-iscsi-debuginfo\", rpm:\"libvirt-daemon-driver-storage-iscsi-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-logical\", rpm:\"libvirt-daemon-driver-storage-logical~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-logical-debuginfo\", rpm:\"libvirt-daemon-driver-storage-logical-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-mpath\", rpm:\"libvirt-daemon-driver-storage-mpath~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-mpath-debuginfo\", rpm:\"libvirt-daemon-driver-storage-mpath-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-scsi\", rpm:\"libvirt-daemon-driver-storage-scsi~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-scsi-debuginfo\", rpm:\"libvirt-daemon-driver-storage-scsi-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-uml\", rpm:\"libvirt-daemon-driver-uml~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-uml-debuginfo\", rpm:\"libvirt-daemon-driver-uml-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-vbox\", rpm:\"libvirt-daemon-driver-vbox~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-vbox-debuginfo\", rpm:\"libvirt-daemon-driver-vbox-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-hooks\", rpm:\"libvirt-daemon-hooks~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-lxc\", rpm:\"libvirt-daemon-lxc~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-qemu\", rpm:\"libvirt-daemon-qemu~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-uml\", rpm:\"libvirt-daemon-uml~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-vbox\", rpm:\"libvirt-daemon-vbox~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-debugsource\", rpm:\"libvirt-debugsource~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-devel\", rpm:\"libvirt-devel~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-doc\", rpm:\"libvirt-doc~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-libs\", rpm:\"libvirt-libs~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-libs-debuginfo\", rpm:\"libvirt-libs-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-lock-sanlock\", rpm:\"libvirt-lock-sanlock~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-lock-sanlock-debuginfo\", rpm:\"libvirt-lock-sanlock-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-nss\", rpm:\"libvirt-nss~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-nss-debuginfo\", rpm:\"libvirt-nss-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"wireshark-plugin-libvirt\", rpm:\"wireshark-plugin-libvirt~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"wireshark-plugin-libvirt-debuginfo\", rpm:\"wireshark-plugin-libvirt-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-client-32bit-debuginfo\", rpm:\"libvirt-client-32bit-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-libxl\", rpm:\"libvirt-daemon-driver-libxl~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-libxl-debuginfo\", rpm:\"libvirt-daemon-driver-libxl-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-rbd\", rpm:\"libvirt-daemon-driver-storage-rbd~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-driver-storage-rbd-debuginfo\", rpm:\"libvirt-daemon-driver-storage-rbd-debuginfo~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-daemon-xen\", rpm:\"libvirt-daemon-xen~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"libvirt-devel-32bit\", rpm:\"libvirt-devel-32bit~4.0.0~lp150.7.14.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-03-14T17:06:46", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-21T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for qemu (openSUSE-SU-2019:1420-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852508", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852508", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852508\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-21 02:01:13 +0000 (Tue, 21 May 2019)\");\n script_name(\"openSUSE: Security Advisory for qemu (openSUSE-SU-2019:1420-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap42\\.3\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1420-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-05/msg00044.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'qemu'\n package(s) announced via the openSUSE-SU-2019:1420-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for qemu fixes the following issues:\n\n - CVE-2018-12126 CVE-2018-12127 CVE-2018-12130 CVE-2019-11091: Added x86\n cpu feature 'md-clear' (bsc#1111331)\n\n This update was imported from the SUSE:SLE-12-SP3:Update update project.\n\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 42.3:\n\n zypper in -t patch openSUSE-2019-1420=1\");\n\n script_tag(name:\"affected\", value:\"'qemu' package(s) on openSUSE Leap 42.3.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap42.3\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-linux-user\", rpm:\"qemu-linux-user~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-linux-user-debuginfo\", rpm:\"qemu-linux-user-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-linux-user-debugsource\", rpm:\"qemu-linux-user-debugsource~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu\", rpm:\"qemu~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-arm\", rpm:\"qemu-arm~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-arm-debuginfo\", rpm:\"qemu-arm-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-curl\", rpm:\"qemu-block-curl~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-curl-debuginfo\", rpm:\"qemu-block-curl-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-dmg\", rpm:\"qemu-block-dmg~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-dmg-debuginfo\", rpm:\"qemu-block-dmg-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-iscsi\", rpm:\"qemu-block-iscsi~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-iscsi-debuginfo\", rpm:\"qemu-block-iscsi-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-rbd\", rpm:\"qemu-block-rbd~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-rbd-debuginfo\", rpm:\"qemu-block-rbd-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-ssh\", rpm:\"qemu-block-ssh~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-block-ssh-debuginfo\", rpm:\"qemu-block-ssh-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-debugsource\", rpm:\"qemu-debugsource~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-extra\", rpm:\"qemu-extra~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-extra-debuginfo\", rpm:\"qemu-extra-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-guest-agent\", rpm:\"qemu-guest-agent~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-guest-agent-debuginfo\", rpm:\"qemu-guest-agent-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ksm\", rpm:\"qemu-ksm~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-kvm\", rpm:\"qemu-kvm~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-lang\", rpm:\"qemu-lang~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ppc\", rpm:\"qemu-ppc~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ppc-debuginfo\", rpm:\"qemu-ppc-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-s390\", rpm:\"qemu-s390~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-s390-debuginfo\", rpm:\"qemu-s390-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-testsuite\", rpm:\"qemu-testsuite~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-tools\", rpm:\"qemu-tools~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-tools-debuginfo\", rpm:\"qemu-tools-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-x86\", rpm:\"qemu-x86~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-x86-debuginfo\", rpm:\"qemu-x86-debuginfo~2.9.1~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-ipxe\", rpm:\"qemu-ipxe~1.0.0+~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-seabios\", rpm:\"qemu-seabios~1.10.2~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-sgabios\", rpm:\"qemu-sgabios~8~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(!isnull(res = isrpmvuln(pkg:\"qemu-vgabios\", rpm:\"qemu-vgabios~1.10.2~62.1\", rls:\"openSUSELeap42.3\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2020-01-31T16:53:48", "description": "The remote host is missing an update for the ", "cvss3": {}, "published": "2019-05-29T00:00:00", "type": "openvas", "title": "openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1468-1)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2019-11091", "CVE-2018-12130"], "modified": "2020-01-31T00:00:00", "id": "OPENVAS:1361412562310852523", "href": "http://plugins.openvas.org/nasl.php?oid=1361412562310852523", "sourceData": "# Copyright (C) 2019 Greenbone Networks GmbH\n# Text descriptions are largely excerpted from the referenced\n# advisory, and are Copyright (C) the respective author(s)\n#\n# SPDX-License-Identifier: GPL-2.0-or-later\n#\n# This program is free software; you can redistribute it and/or\n# modify it under the terms of the GNU General Public License\n# as published by the Free Software Foundation; either version 2\n# of the License, or (at your option) any later version.\n#\n# This program is distributed in the hope that it will be useful,\n# but WITHOUT ANY WARRANTY; without even the implied warranty of\n# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n# GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License\n# along with this program; if not, write to the Free Software\n# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.\n\nif(description)\n{\n script_oid(\"1.3.6.1.4.1.25623.1.0.852523\");\n script_version(\"2020-01-31T08:04:39+0000\");\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_tag(name:\"cvss_base\", value:\"4.7\");\n script_tag(name:\"cvss_base_vector\", value:\"AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_tag(name:\"last_modification\", value:\"2020-01-31 08:04:39 +0000 (Fri, 31 Jan 2020)\");\n script_tag(name:\"creation_date\", value:\"2019-05-29 02:00:49 +0000 (Wed, 29 May 2019)\");\n script_name(\"openSUSE: Security Advisory for ucode-intel (openSUSE-SU-2019:1468-1)\");\n script_category(ACT_GATHER_INFO);\n script_copyright(\"Copyright (C) 2019 Greenbone Networks GmbH\");\n script_family(\"SuSE Local Security Checks\");\n script_dependencies(\"gather-package-list.nasl\");\n script_mandatory_keys(\"ssh/login/suse\", \"ssh/login/rpms\", re:\"ssh/login/release=openSUSELeap15\\.0\");\n\n script_xref(name:\"openSUSE-SU\", value:\"2019:1468-1\");\n script_xref(name:\"URL\", value:\"https://lists.opensuse.org/opensuse-security-announce/2019-05/msg00066.html\");\n\n script_tag(name:\"summary\", value:\"The remote host is missing an update for the 'ucode-intel'\n package(s) announced via the openSUSE-SU-2019:1468-1 advisory.\");\n\n script_tag(name:\"vuldetect\", value:\"Checks if a vulnerable package version is present on the target host.\");\n\n script_tag(name:\"insight\", value:\"This update for ucode-intel fixes the following issues:\n\n The Intel CPU Microcode was updated to the official QSR 2019.1 Microcode\n release (bsc#1111331 CVE-2018-12126 CVE-2018-12130 CVE-2018-12127\n CVE-2019-11091)\n\n - --- new platforms ---------------------------------------- VLV\n C0 6-37-8/02 00000838 Atom Z series VLV C0\n 6-37-8/0C 00000838 Celeron N2xxx, Pentium N35xx VLV\n D0 6-37-9/0F 0000090c Atom E38xx CHV C0\n 6-4c-3/01 00000368 Atom X series CHV D0\n 6-4c-4/01 00000411 Atom X series\n\n read missing in last update:\n\n BDX-ML B0/M0/R0 6-4f-1/ef 0b00002e->00000036 Xeon E5/E7 v4, Core\n i7-69xx/68xx\n\n This update was imported from the SUSE:SLE-15:Update update project.\n\n Patch Instructions:\n\n To install this openSUSE Security Update use the SUSE recommended\n installation methods\n like YaST online_update or 'zypper patch'.\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.0:\n\n zypper in -t patch openSUSE-2019-1468=1\");\n\n script_tag(name:\"affected\", value:\"'ucode-intel' package(s) on openSUSE Leap 15.0.\");\n\n script_tag(name:\"solution\", value:\"Please install the updated package(s).\");\n\n script_tag(name:\"solution_type\", value:\"VendorFix\");\n script_tag(name:\"qod_type\", value:\"package\");\n\n exit(0);\n}\n\ninclude(\"revisions-lib.inc\");\ninclude(\"pkg-lib-rpm.inc\");\n\nrelease = rpm_get_ssh_release();\nif(!release)\n exit(0);\n\nres = \"\";\nreport = \"\";\n\nif(release == \"openSUSELeap15.0\") {\n\n if(!isnull(res = isrpmvuln(pkg:\"ucode-intel\", rpm:\"ucode-intel~20190514~lp150.2.21.1\", rls:\"openSUSELeap15.0\"))) {\n report += res;\n }\n\n if(report != \"\") {\n security_message(data:report);\n } else if(__pkg_match) {\n exit(99);\n }\n exit(0);\n}\n\nexit(0);\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}], "nessus": [{"lastseen": "2023-05-18T15:24:10", "description": "The remote CentOS Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the CESA-2019:1167 advisory.\n\n - hardware: Microarchitectural Store Buffer Data Sampling (MSBDS) (CVE-2018-12126)\n\n - hardware: Micro-architectural Load Port Data Sampling - Information Leak (MLPDS) (CVE-2018-12127)\n\n - hardware: Microarchitectural Fill Buffer Data Sampling (MFBDS) (CVE-2018-12130)\n\n - hardware: Microarchitectural Data Sampling Uncacheable Memory (MDSUM) (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {}, "published": "2021-01-29T00:00:00", "type": "nessus", "title": "CentOS 8 : kernel (CESA-2019:1167)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2022-12-05T00:00:00", "cpe": ["cpe:/o:centos:centos:8", "p-cpe:/a:centos:centos:bpftool", "p-cpe:/a:centos:centos:kernel", "p-cpe:/a:centos:centos:kernel-abi-whitelists", "p-cpe:/a:centos:centos:kernel-core", "p-cpe:/a:centos:centos:kernel-cross-headers", "p-cpe:/a:centos:centos:kernel-debug", "p-cpe:/a:centos:centos:kernel-debug-core", "p-cpe:/a:centos:centos:kernel-debug-devel", "p-cpe:/a:centos:centos:kernel-debug-modules", "p-cpe:/a:centos:centos:kernel-debug-modules-extra", "p-cpe:/a:centos:centos:kernel-devel", "p-cpe:/a:centos:centos:kernel-headers", "p-cpe:/a:centos:centos:kernel-modules", "p-cpe:/a:centos:centos:kernel-modules-extra", "p-cpe:/a:centos:centos:kernel-tools", "p-cpe:/a:centos:centos:kernel-tools-libs", "p-cpe:/a:centos:centos:kernel-tools-libs-devel", "p-cpe:/a:centos:centos:perf", "p-cpe:/a:centos:centos:python3-perf"], "id": "CENTOS8_RHSA-2019-1167.NASL", "href": "https://www.tenable.com/plugins/nessus/145598", "sourceData": "##\n# (C) Tenable Network Security, Inc.\n#\n# The package checks in this plugin were extracted from\n# Red Hat Security Advisory RHSA-2019:1167. The text\n# itself is copyright (C) Red Hat, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(145598);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_bugtraq_id(108330);\n script_xref(name:\"RHSA\", value:\"2019:1167\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0547\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2019-0324\");\n\n script_name(english:\"CentOS 8 : kernel (CESA-2019:1167)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote CentOS host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote CentOS Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nCESA-2019:1167 advisory.\n\n - hardware: Microarchitectural Store Buffer Data Sampling (MSBDS) (CVE-2018-12126)\n\n - hardware: Micro-architectural Load Port Data Sampling - Information Leak (MLPDS) (CVE-2018-12127)\n\n - hardware: Microarchitectural Fill Buffer Data Sampling (MFBDS) (CVE-2018-12130)\n\n - hardware: Microarchitectural Data Sampling Uncacheable Memory (MDSUM) (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/errata/RHSA-2019:1167\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/07\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2021/01/29\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:centos:centos:8\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:bpftool\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-cross-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-debug-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:centos:centos:python3-perf\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"CentOS Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2021-2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/CentOS/release\", \"Host/CentOS/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude('audit.inc');\ninclude('global_settings.inc');\ninclude('misc_func.inc');\ninclude('rpm.inc');\ninclude('rhel.inc');\ninclude('ksplice.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item('Host/CentOS/release');\nif (isnull(release) || 'CentOS' >!< release) audit(AUDIT_OS_NOT, 'CentOS');\nos_ver = pregmatch(pattern: \"CentOS(?: Stream)?(?: Linux)? release ([0-9]+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'CentOS');\nos_ver = os_ver[1];\nif ('CentOS Stream' >< release) audit(AUDIT_OS_NOT, 'CentOS 8.x', 'CentOS Stream ' + os_ver);\nif (!rhel_check_release(operator: 'ge', os_version: os_ver, rhel_version: '8')) audit(AUDIT_OS_NOT, 'CentOS 8.x', 'CentOS ' + os_ver);\n\nif (!get_kb_item('Host/CentOS/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'CentOS', cpu);\n\nif (get_one_kb_item('Host/ksplice/kernel-cves'))\n{\n rm_kb_item(name:'Host/uptrack-uname-r');\n cve_list = make_list('CVE-2018-12126', 'CVE-2018-12127', 'CVE-2018-12130', 'CVE-2019-11091');\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, 'KSplice hotfix for CESA-2019:1167');\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\npkgs = [\n {'reference':'bpftool-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'bpftool-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-abi-whitelists-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-abi-whitelists-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-core-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-core-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-cross-headers-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-cross-headers-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-debug-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-debug-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-debug-core-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-debug-core-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-debug-devel-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-debug-devel-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-debug-modules-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-debug-modules-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-debug-modules-extra-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-debug-modules-extra-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-devel-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-devel-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-headers-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-headers-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-modules-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-modules-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-modules-extra-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-modules-extra-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-tools-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-tools-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-tools-libs-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-tools-libs-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-tools-libs-devel-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'kernel-tools-libs-devel-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'perf-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'perf-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'python3-perf-4.18.0-80.1.2.el8_0', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'python3-perf-4.18.0-80.1.2.el8_0', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE}\n];\n\nflag = 0;\nforeach package_array ( pkgs ) {\n reference = NULL;\n release = NULL;\n sp = NULL;\n cpu = NULL;\n el_string = NULL;\n rpm_spec_vers_cmp = NULL;\n epoch = NULL;\n allowmaj = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = 'CentOS-' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (reference && release) {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'bpftool / kernel / kernel-abi-whitelists / kernel-core / etc');\n}\n", "cvss": {"score": 0.0, "vector": "NONE"}}, {"lastseen": "2022-02-28T13:15:10", "description": "An update for kernel is now available for Red Hat Enterprise Linux 8.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* Need to remove radix-tree symbols from the whitelist (BZ#1696222)\n\n* Installation of kernel-modules-extra rpm conflicts with kmod weak-modules (BZ#1703395)", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 8 : kernel (RHSA-2019:1167) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-30T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:bpftool", "p-cpe:/a:redhat:enterprise_linux:bpftool-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel", "p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists", "p-cpe:/a:redhat:enterprise_linux:kernel-core", "p-cpe:/a:redhat:enterprise_linux:kernel-cross-headers", "p-cpe:/a:redhat:enterprise_linux:kernel-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-core", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-modules", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-modules-extra", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-aarch64", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-headers", "p-cpe:/a:redhat:enterprise_linux:kernel-modules", "p-cpe:/a:redhat:enterprise_linux:kernel-modules-extra", "p-cpe:/a:redhat:enterprise_linux:kernel-tools", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-core", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-modules", "p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-modules-extra", "p-cpe:/a:redhat:enterprise_linux:perf", "p-cpe:/a:redhat:enterprise_linux:perf-debuginfo", "p-cpe:/a:redhat:enterprise_linux:python3-perf", "p-cpe:/a:redhat:enterprise_linux:python3-perf-debuginfo", "cpe:/o:redhat:enterprise_linux:8", "cpe:/o:redhat:enterprise_linux:8.0"], "id": "REDHAT-RHSA-2019-1167.NASL", "href": "https://www.tenable.com/plugins/nessus/125036", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1167. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125036);\n script_version(\"1.7\");\n script_cvs_date(\"Date: 2020/01/30\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1167\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 8 : kernel (RHSA-2019:1167) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 8.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* Need to remove radix-tree symbols from the whitelist (BZ#1696222)\n\n* Installation of kernel-modules-extra rpm conflicts with kmod\nweak-modules (BZ#1703395)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1167\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:bpftool\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:bpftool-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-cross-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-aarch64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-zfcpdump-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python3-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python3-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:8\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:8.0\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^8([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 8.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1167\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1167\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"bpftool-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"bpftool-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"bpftool-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"bpftool-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"bpftool-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", reference:\"kernel-abi-whitelists-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-core-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-core-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-cross-headers-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-cross-headers-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-core-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-core-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"kernel-debug-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-modules-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-modules-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debug-modules-extra-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debug-modules-extra-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"kernel-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"kernel-debuginfo-common-aarch64-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-debuginfo-common-s390x-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", reference:\"kernel-doc-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-headers-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-headers-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-modules-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-modules-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-modules-extra-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-modules-extra-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-tools-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-tools-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"kernel-tools-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-tools-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-tools-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-tools-libs-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"kernel-tools-libs-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-core-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-devel-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-modules-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"kernel-zfcpdump-modules-extra-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"perf-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"perf-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"python3-perf-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"python3-perf-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", sp:\"0\", cpu:\"aarch64\", reference:\"python3-perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"s390x\", reference:\"python3-perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"python3-perf-debuginfo-4.18.0-80.1.2.el8_0\")) flag++;\n\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"bpftool / bpftool-debuginfo / kernel / kernel-abi-whitelists / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:10", "description": "An update for kernel is now available for Red Hat Enterprise Linux 7.5 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : kernel (RHSA-2019:1155) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:kernel", "p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists", "p-cpe:/a:redhat:enterprise_linux:kernel-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-headers", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-tools", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs", "p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel", "p-cpe:/a:redhat:enterprise_linux:perf", "p-cpe:/a:redhat:enterprise_linux:perf-debuginfo", "p-cpe:/a:redhat:enterprise_linux:python-perf", "p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo", "cpe:/o:redhat:enterprise_linux:7.5"], "id": "REDHAT-RHSA-2019-1155.NASL", "href": "https://www.tenable.com/plugins/nessus/125033", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1155. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125033);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1155\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : kernel (RHSA-2019:1155) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 7.5\nExtended Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1155\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-tools-libs-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.5\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.5([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.5\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1155\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1155\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"kernel-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", reference:\"kernel-abi-whitelists-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"kernel-debug-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-debug-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"kernel-debug-debuginfo-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"kernel-debug-devel-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-debug-devel-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"kernel-debuginfo-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-debuginfo-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"kernel-debuginfo-common-s390x-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"kernel-devel-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-devel-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", reference:\"kernel-doc-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"kernel-headers-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-headers-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"kernel-kdump-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"kernel-kdump-debuginfo-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"kernel-kdump-devel-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-tools-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-tools-debuginfo-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-tools-libs-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"kernel-tools-libs-devel-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"perf-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"perf-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"perf-debuginfo-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"perf-debuginfo-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"python-perf-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"python-perf-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"s390x\", reference:\"python-perf-debuginfo-3.10.0-862.32.2.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-3.10.0-862.32.2.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:32", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 7.5 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : qemu-kvm (RHSA-2019:1183) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:7.5"], "id": "REDHAT-RHSA-2019-1183.NASL", "href": "https://www.tenable.com/plugins/nessus/125049", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1183. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125049);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1183\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : qemu-kvm (RHSA-2019:1183) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.5 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1183\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.5\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.5([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.5\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1183\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-156.el7_5.7\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-156.el7_5.7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:58", "description": "An update for libvirt is now available for Red Hat Enterprise Linux 7.4 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : libvirt (RHSA-2019:1184) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:libvirt", "p-cpe:/a:redhat:enterprise_linux:libvirt-admin", "p-cpe:/a:redhat:enterprise_linux:libvirt-client", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-network", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-interface", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-network", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-secret", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-core", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-disk", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-gluster", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-logical", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-kvm", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-lxc", "p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo", "p-cpe:/a:redhat:enterprise_linux:libvirt-devel", "p-cpe:/a:redhat:enterprise_linux:libvirt-docs", "p-cpe:/a:redhat:enterprise_linux:libvirt-libs", "p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock", "p-cpe:/a:redhat:enterprise_linux:libvirt-login-shell", "p-cpe:/a:redhat:enterprise_linux:libvirt-nss", "cpe:/o:redhat:enterprise_linux:7.4"], "id": "REDHAT-RHSA-2019-1184.NASL", "href": "https://www.tenable.com/plugins/nessus/125050", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1184. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125050);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1184\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : libvirt (RHSA-2019:1184) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for libvirt is now available for Red Hat Enterprise Linux\n7.4 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1184\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-gluster\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-docs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-login-shell\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.4\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.4([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.4\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1184\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-admin-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-admin-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", reference:\"libvirt-client-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-config-network-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-network-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-config-nwfilter-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-nwfilter-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-interface-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-lxc-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-network-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-nodedev-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-nwfilter-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-secret-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-core-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-disk-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-gluster-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-iscsi-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-logical-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-mpath-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-scsi-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-kvm-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-daemon-lxc-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-daemon-lxc-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", reference:\"libvirt-debuginfo-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", reference:\"libvirt-devel-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-docs-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-docs-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", reference:\"libvirt-libs-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"s390x\", reference:\"libvirt-login-shell-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", cpu:\"x86_64\", reference:\"libvirt-login-shell-3.2.0-14.el7_4.13\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"4\", reference:\"libvirt-nss-3.2.0-14.el7_4.13\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-admin / libvirt-client / libvirt-daemon / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:53", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 7.3 Advanced Update Support, Red Hat Enterprise Linux 7.3 Telco Extended Update Support, and Red Hat Enterprise Linux 7.3 Update Services for SAP Solutions.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 7 : qemu-kvm (RHSA-2019:1189) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:7.3"], "id": "REDHAT-RHSA-2019-1189.NASL", "href": "https://www.tenable.com/plugins/nessus/125122", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1189. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125122);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1189\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : qemu-kvm (RHSA-2019:1189) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.3 Advanced Update Support, Red Hat Enterprise Linux 7.3 Telco\nExtended Update Support, and Red Hat Enterprise Linux 7.3 Update\nServices for SAP Solutions.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1189\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.3\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7\\.3([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.3\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1189\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-126.el7_3.17\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-126.el7_3.17\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-126.el7_3.17\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-126.el7_3.17\")) flag++;\n if (rpm_check(release:\"RHEL7\", sp:\"3\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-126.el7_3.17\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:10", "description": "An update for kernel-rt is now available for Red Hat Enterprise Linux 8.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel-rt packages provide the Real Time Linux Kernel, which enables fine-tuning for systems with extremely high determinism requirements.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 8 : kernel-rt (RHSA-2019:1174) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:kernel-rt", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-core", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-core", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-modules", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-modules-extra", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-modules", "p-cpe:/a:redhat:enterprise_linux:kernel-rt-modules-extra", "cpe:/o:redhat:enterprise_linux:8"], "id": "REDHAT-RHSA-2019-1174.NASL", "href": "https://www.tenable.com/plugins/nessus/125040", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1174. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125040);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1174\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 8 : kernel-rt (RHSA-2019:1174) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel-rt is now available for Red Hat Enterprise Linux\n8.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel-rt packages provide the Real Time Linux Kernel, which\nenables fine-tuning for systems with extremely high determinism\nrequirements.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1174\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debug-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-modules\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-rt-modules-extra\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:8\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^8([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 8.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1174\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1174\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-core-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-core-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-debuginfo-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-devel-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-kvm-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-kvm-debuginfo-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-modules-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debug-modules-extra-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debuginfo-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-debuginfo-common-x86_64-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-devel-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-kvm-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-kvm-debuginfo-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-modules-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n if (rpm_check(release:\"RHEL8\", cpu:\"x86_64\", reference:\"kernel-rt-modules-extra-4.18.0-80.1.2.rt9.145.el8_0\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel-rt / kernel-rt-core / kernel-rt-debug / kernel-rt-debug-core / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:32", "description": "An update for libvirt is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : libvirt (RHSA-2019:1177) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:libvirt", "p-cpe:/a:redhat:enterprise_linux:libvirt-admin", "p-cpe:/a:redhat:enterprise_linux:libvirt-bash-completion", "p-cpe:/a:redhat:enterprise_linux:libvirt-client", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-network", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-interface", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-lxc", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-network", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-qemu", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-secret", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-core", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-disk", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-gluster", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-logical", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-kvm", "p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-lxc", "p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo", "p-cpe:/a:redhat:enterprise_linux:libvirt-devel", "p-cpe:/a:redhat:enterprise_linux:libvirt-docs", "p-cpe:/a:redhat:enterprise_linux:libvirt-libs", "p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock", "p-cpe:/a:redhat:enterprise_linux:libvirt-login-shell", "p-cpe:/a:redhat:enterprise_linux:libvirt-nss", "cpe:/o:redhat:enterprise_linux:7", "cpe:/o:redhat:enterprise_linux:7.6"], "id": "REDHAT-RHSA-2019-1177.NASL", "href": "https://www.tenable.com/plugins/nessus/125043", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1177. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125043);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1177\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : libvirt (RHSA-2019:1177) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for libvirt is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1177\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-bash-completion\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-gluster\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-docs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-login-shell\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1177\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-admin-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-admin-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-bash-completion-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-bash-completion-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", reference:\"libvirt-client-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-config-network-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-network-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-config-nwfilter-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-nwfilter-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-interface-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-lxc-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-network-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-nodedev-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-nwfilter-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-qemu-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-secret-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-gluster-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-iscsi-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-logical-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-mpath-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-driver-storage-scsi-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-kvm-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-kvm-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-daemon-lxc-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-lxc-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", reference:\"libvirt-debuginfo-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", reference:\"libvirt-devel-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-docs-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-docs-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", reference:\"libvirt-libs-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-lock-sanlock-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"s390x\", reference:\"libvirt-login-shell-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"libvirt-login-shell-4.5.0-10.el7_6.9\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", reference:\"libvirt-nss-4.5.0-10.el7_6.9\")) flag++;\n\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-admin / libvirt-bash-completion / libvirt-client / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:52", "description": "An update for redhat-release-virtualization-host and redhat-virtualization-host is now available for Red Hat Virtualization 4.2 for Red Hat Enterprise Linux 7.6 EUS.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe redhat-virtualization-host packages provide the Red Hat Virtualization Host. These packages include redhat-release-virtualization-host, ovirt-node, and rhev-hypervisor.\nRed Hat Virtualization Hosts (RHVH) are installed using a special build of Red Hat Enterprise Linux with only the packages required to host virtual machines. RHVH features a Cockpit user interface for monitoring the host's resources and performing administrative tasks.\n\nThe ovirt-node-ng packages provide the Red Hat Virtualization Host.\nThese packages include redhat-release-virtualization-host, ovirt-node, and rhev-hypervisor. Red Hat Virtualization Hosts (RHVH) are installed using a special build of Red Hat Enterprise Linux with only the packages required to host virtual machines. RHVH features a Cockpit user interface for monitoring the host's resources and performing administrative tasks.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "RHEL 7 : Virtualization Manager (RHSA-2019:1209) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:redhat-release-virtualization-host", "p-cpe:/a:redhat:enterprise_linux:redhat-release-virtualization-host-content", "p-cpe:/a:redhat:enterprise_linux:redhat-virtualization-host-image-update", "p-cpe:/a:redhat:enterprise_linux:redhat-virtualization-host-image-update-placeholder", "cpe:/o:redhat:enterprise_linux:7"], "id": "REDHAT-RHSA-2019-1209.NASL", "href": "https://www.tenable.com/plugins/nessus/125199", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1209. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125199);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1209\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : Virtualization Manager (RHSA-2019:1209) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for redhat-release-virtualization-host and\nredhat-virtualization-host is now available for Red Hat Virtualization\n4.2 for Red Hat Enterprise Linux 7.6 EUS.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe redhat-virtualization-host packages provide the Red Hat\nVirtualization Host. These packages include\nredhat-release-virtualization-host, ovirt-node, and rhev-hypervisor.\nRed Hat Virtualization Hosts (RHVH) are installed using a special\nbuild of Red Hat Enterprise Linux with only the packages required to\nhost virtual machines. RHVH features a Cockpit user interface for\nmonitoring the host's resources and performing administrative tasks.\n\nThe ovirt-node-ng packages provide the Red Hat Virtualization Host.\nThese packages include redhat-release-virtualization-host, ovirt-node,\nand rhev-hypervisor. Red Hat Virtualization Hosts (RHVH) are installed\nusing a special build of Red Hat Enterprise Linux with only the\npackages required to host virtual machines. RHVH features a Cockpit\nuser interface for monitoring the host's resources and performing\nadministrative tasks.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1209\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:redhat-release-virtualization-host\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:redhat-release-virtualization-host-content\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:redhat-virtualization-host-image-update\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:redhat-virtualization-host-image-update-placeholder\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1209\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"redhat-release-virtualization-host-4.2-8.6.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"redhat-release-virtualization-host-content-4.2-8.6.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"redhat-virtualization-host-image-update-4.2-20190512.0.el7_6\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"redhat-virtualization-host-image-update-placeholder-4.2-8.6.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"redhat-release-virtualization-host / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:46", "description": "An update for vdsm is now available for Red Hat Virtualization 4.2 for Red Hat Enterprise Linux 7.6 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe VDSM service is required by a Virtualization Manager to manage the Linux hosts. VDSM manages and monitors the host's storage, memory and networks as well as virtual machine creation, other host administration tasks, statistics gathering, and log collection.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "RHEL 7 : Virtualization Manager (RHSA-2019:1204) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:vdsm", "p-cpe:/a:redhat:enterprise_linux:vdsm-api", "p-cpe:/a:redhat:enterprise_linux:vdsm-client", "p-cpe:/a:redhat:enterprise_linux:vdsm-common", "p-cpe:/a:redhat:enterprise_linux:vdsm-gluster", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-checkips", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-cpuflags", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-ethtool-options", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-extra-ipv4-addrs", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-fcoe", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-localdisk", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-macspoof", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-nestedvt", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-openstacknet", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-vhostmd", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-vmfex-dev", "p-cpe:/a:redhat:enterprise_linux:vdsm-http", "p-cpe:/a:redhat:enterprise_linux:vdsm-jsonrpc", "p-cpe:/a:redhat:enterprise_linux:vdsm-network", "p-cpe:/a:redhat:enterprise_linux:vdsm-python", "p-cpe:/a:redhat:enterprise_linux:vdsm-yajsonrpc", "cpe:/o:redhat:enterprise_linux:7"], "id": "REDHAT-RHSA-2019-1204.NASL", "href": "https://www.tenable.com/plugins/nessus/125194", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1204. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125194);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1204\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : Virtualization Manager (RHSA-2019:1204) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for vdsm is now available for Red Hat Virtualization 4.2 for\nRed Hat Enterprise Linux 7.6 Extended Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe VDSM service is required by a Virtualization Manager to manage the\nLinux hosts. VDSM manages and monitors the host's storage, memory and\nnetworks as well as virtual machine creation, other host\nadministration tasks, statistics gathering, and log collection.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1204\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-api\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-gluster\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-checkips\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-cpuflags\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-ethtool-options\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-extra-ipv4-addrs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-fcoe\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-localdisk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-macspoof\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-nestedvt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-openstacknet\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-vhostmd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-vmfex-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-http\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-jsonrpc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-python\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-yajsonrpc\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1204\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"vdsm-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-api-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-client-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-common-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"vdsm-gluster-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"vdsm-hook-checkips-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-cpuflags-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-ethtool-options-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"vdsm-hook-extra-ipv4-addrs-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-fcoe-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-localdisk-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-macspoof-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-nestedvt-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-openstacknet-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-vhostmd-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-vmfex-dev-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-http-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-jsonrpc-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"vdsm-network-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-python-4.20.49-1.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-yajsonrpc-4.20.49-1.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"vdsm / vdsm-api / vdsm-client / vdsm-common / vdsm-gluster / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:34", "description": "An update for rhvm-setup-plugins is now available for Red Hat Virtualization 4.3.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe rhvm-setup-plugins package adds functionality exclusive only to Red Hat Virtualization Manager, and is not available for the upstream ovirt-engine. It includes the configuration of the Red Hat Support plugin, copying downstream-only artifacts to the ISO domain, and links to the knowledgebase and other support material.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "RHEL 7 : Virtualization Manager (RHSA-2019:1205) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:rhvm-setup-plugins", "cpe:/o:redhat:enterprise_linux:7"], "id": "REDHAT-RHSA-2019-1205.NASL", "href": "https://www.tenable.com/plugins/nessus/125195", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1205. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125195);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1205\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : Virtualization Manager (RHSA-2019:1205) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated package\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for rhvm-setup-plugins is now available for Red Hat\nVirtualization 4.3.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe rhvm-setup-plugins package adds functionality exclusive only to\nRed Hat Virtualization Manager, and is not available for the upstream\novirt-engine. It includes the configuration of the Red Hat Support\nplugin, copying downstream-only artifacts to the ISO domain, and links\nto the knowledgebase and other support material.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1205\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected rhvm-setup-plugins package.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:rhvm-setup-plugins\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1205\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", reference:\"rhvm-setup-plugins-4.3.1-1.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"rhvm-setup-plugins\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:24", "description": "An update for rhvm-setup-plugins is now available for Red Hat Virtualization 4.2.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe rhvm-setup-plugins package adds functionality exclusive only to Red Hat Virtualization Manager, and is not available for the upstream ovirt-engine. It includes the configuration of the Red Hat Support plugin, copying downstream-only artifacts to the ISO domain, and links to the knowledgebase and other support material.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "RHEL 7 : Virtualization Manager (RHSA-2019:1206) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:rhvm-setup-plugins", "cpe:/o:redhat:enterprise_linux:7"], "id": "REDHAT-RHSA-2019-1206.NASL", "href": "https://www.tenable.com/plugins/nessus/125196", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1206. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125196);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1206\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : Virtualization Manager (RHSA-2019:1206) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated package\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing a security update.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for rhvm-setup-plugins is now available for Red Hat\nVirtualization 4.2.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe rhvm-setup-plugins package adds functionality exclusive only to\nRed Hat Virtualization Manager, and is not available for the upstream\novirt-engine. It includes the configuration of the Red Hat Support\nplugin, copying downstream-only artifacts to the ISO domain, and links\nto the knowledgebase and other support material.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1206\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected rhvm-setup-plugins package.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:rhvm-setup-plugins\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1206\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", reference:\"rhvm-setup-plugins-4.2.14-1.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"rhvm-setup-plugins\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:40", "description": "An update for kernel is now available for Red Hat Enterprise Linux 6.6 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 6 : kernel (RHSA-2019:1193) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:kernel", "p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists", "p-cpe:/a:redhat:enterprise_linux:kernel-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-firmware", "p-cpe:/a:redhat:enterprise_linux:kernel-headers", "p-cpe:/a:redhat:enterprise_linux:perf", "p-cpe:/a:redhat:enterprise_linux:perf-debuginfo", "p-cpe:/a:redhat:enterprise_linux:python-perf", "p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo", "cpe:/o:redhat:enterprise_linux:6.6"], "id": "REDHAT-RHSA-2019-1193.NASL", "href": "https://www.tenable.com/plugins/nessus/125123", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1193. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125123);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1193\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : kernel (RHSA-2019:1193) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 6.6\nAdvanced Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1193\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-firmware\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:6.6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6\\.6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 6.6\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1193\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1193\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", reference:\"kernel-abi-whitelists-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-debug-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-debug-devel-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-debuginfo-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-devel-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", reference:\"kernel-doc-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", reference:\"kernel-firmware-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"kernel-headers-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"perf-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"perf-debuginfo-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"python-perf-2.6.32-504.78.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-2.6.32-504.78.2.el6\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:46", "description": "An update for libvirt is now available for Red Hat Enterprise Linux 6.6 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 6 : libvirt (RHSA-2019:1194) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:libvirt", "p-cpe:/a:redhat:enterprise_linux:libvirt-client", "p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo", "p-cpe:/a:redhat:enterprise_linux:libvirt-devel", "p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock", "p-cpe:/a:redhat:enterprise_linux:libvirt-python", "cpe:/o:redhat:enterprise_linux:6.6"], "id": "REDHAT-RHSA-2019-1194.NASL", "href": "https://www.tenable.com/plugins/nessus/125124", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1194. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125124);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1194\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : libvirt (RHSA-2019:1194) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for libvirt is now available for Red Hat Enterprise Linux\n6.6 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1194\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libvirt-python\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:6.6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6\\.6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 6.6\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1194\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"libvirt-0.10.2-46.el6_6.10\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"i686\", reference:\"libvirt-client-0.10.2-46.el6_6.10\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"libvirt-client-0.10.2-46.el6_6.10\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"i686\", reference:\"libvirt-debuginfo-0.10.2-46.el6_6.10\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"libvirt-debuginfo-0.10.2-46.el6_6.10\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"i686\", reference:\"libvirt-devel-0.10.2-46.el6_6.10\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"libvirt-devel-0.10.2-46.el6_6.10\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-0.10.2-46.el6_6.10\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"libvirt-python-0.10.2-46.el6_6.10\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-client / libvirt-debuginfo / libvirt-devel / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 6.6 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 6 : qemu-kvm (RHSA-2019:1195) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-guest-agent", "p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:6.6"], "id": "REDHAT-RHSA-2019-1195.NASL", "href": "https://www.tenable.com/plugins/nessus/125125", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1195. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125125);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1195\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : qemu-kvm (RHSA-2019:1195) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n6.6 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1195\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:6.6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6\\.6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 6.6\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1195\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"qemu-guest-agent-0.12.1.2-2.448.el6_6.8\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"qemu-img-0.12.1.2-2.448.el6_6.8\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"qemu-kvm-0.12.1.2-2.448.el6_6.8\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-0.12.1.2-2.448.el6_6.8\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"6\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-0.12.1.2-2.448.el6_6.8\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-guest-agent / qemu-img / qemu-kvm / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:53", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 6.5 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "RHEL 6 : qemu-kvm (RHSA-2019:1198) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-guest-agent", "p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:6.5"], "id": "REDHAT-RHSA-2019-1198.NASL", "href": "https://www.tenable.com/plugins/nessus/125128", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1198. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125128);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1198\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : qemu-kvm (RHSA-2019:1198) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n6.5 Advanced Update Support.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1198\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:6.5\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6\\.5([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 6.5\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1198\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL6\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-guest-agent-0.12.1.2-2.415.el6_5.20\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-img-0.12.1.2-2.415.el6_5.20\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-0.12.1.2-2.415.el6_5.20\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-0.12.1.2-2.415.el6_5.20\")) flag++;\n if (rpm_check(release:\"RHEL6\", sp:\"5\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-0.12.1.2-2.415.el6_5.20\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-guest-agent / qemu-img / qemu-kvm / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:34", "description": "An update for vdsm is now available for Red Hat Virtualization 4 for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe VDSM service is required by a Virtualization Manager to manage the Linux hosts. VDSM manages and monitors the host's storage, memory and networks as well as virtual machine creation, other host administration tasks, statistics gathering, and log collection.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "RHEL 7 : Virtualization Manager (RHSA-2019:1203) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-15T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:vdsm", "p-cpe:/a:redhat:enterprise_linux:vdsm-api", "p-cpe:/a:redhat:enterprise_linux:vdsm-client", "p-cpe:/a:redhat:enterprise_linux:vdsm-common", "p-cpe:/a:redhat:enterprise_linux:vdsm-gluster", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-checkips", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-cpuflags", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-ethtool-options", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-extra-ipv4-addrs", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-fcoe", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-localdisk", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-macspoof", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-nestedvt", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-openstacknet", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-vhostmd", "p-cpe:/a:redhat:enterprise_linux:vdsm-hook-vmfex-dev", "p-cpe:/a:redhat:enterprise_linux:vdsm-http", "p-cpe:/a:redhat:enterprise_linux:vdsm-jsonrpc", "p-cpe:/a:redhat:enterprise_linux:vdsm-network", "p-cpe:/a:redhat:enterprise_linux:vdsm-python", "p-cpe:/a:redhat:enterprise_linux:vdsm-yajsonrpc", "cpe:/o:redhat:enterprise_linux:7"], "id": "REDHAT-RHSA-2019-1203.NASL", "href": "https://www.tenable.com/plugins/nessus/125193", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1203. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125193);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/15\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1203\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : Virtualization Manager (RHSA-2019:1203) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for vdsm is now available for Red Hat Virtualization 4 for\nRed Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe VDSM service is required by a Virtualization Manager to manage the\nLinux hosts. VDSM manages and monitors the host's storage, memory and\nnetworks as well as virtual machine creation, other host\nadministration tasks, statistics gathering, and log collection.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1203\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-api\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-gluster\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-checkips\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-cpuflags\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-ethtool-options\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-extra-ipv4-addrs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-fcoe\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-localdisk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-macspoof\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-nestedvt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-openstacknet\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-vhostmd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-hook-vmfex-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-http\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-jsonrpc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-python\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:vdsm-yajsonrpc\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1203\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"vdsm-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-api-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-client-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-common-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"vdsm-gluster-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"vdsm-hook-checkips-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-cpuflags-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-ethtool-options-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"vdsm-hook-extra-ipv4-addrs-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-fcoe-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-localdisk-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-macspoof-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-nestedvt-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-openstacknet-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-vhostmd-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-hook-vmfex-dev-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-http-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-jsonrpc-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"vdsm-network-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-python-4.30.13-4.el7\")) flag++;\n if (rpm_check(release:\"RHEL7\", reference:\"vdsm-yajsonrpc-4.30.13-4.el7\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"vdsm / vdsm-api / vdsm-client / vdsm-common / vdsm-gluster / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:13:52", "description": "An update for qemu-kvm is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : qemu-kvm (RHSA-2019:1178) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-img", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools", "cpe:/o:redhat:enterprise_linux:7", "cpe:/o:redhat:enterprise_linux:7.6"], "id": "REDHAT-RHSA-2019-1178.NASL", "href": "https://www.tenable.com/plugins/nessus/125044", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1178. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125044);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1178\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : qemu-kvm (RHSA-2019:1178) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1178\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7.6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1178\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-160.el7_6.2\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-160.el7_6.2\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-160.el7_6.2\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-debuginfo-1.5.3-160.el7_6.2\")) flag++;\n\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-160.el7_6.2\")) flag++;\n\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-debuginfo / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:44", "description": "An update for qemu-kvm-rhev is now available for Red Hat Virtualization 4 for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm-rhev packages provide the user-space component for running virtual machines that use KVM in environments managed by Red Hat products.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 7 : Virtualization Manager (RHSA-2019:1179) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:qemu-img-rhev", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common-rhev", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-rhev", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-rhev-debuginfo", "p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools-rhev", "cpe:/o:redhat:enterprise_linux:7"], "id": "REDHAT-RHSA-2019-1179.NASL", "href": "https://www.tenable.com/plugins/nessus/125045", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1179. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125045);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1179\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 7 : Virtualization Manager (RHSA-2019:1179) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for qemu-kvm-rhev is now available for Red Hat\nVirtualization 4 for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKVM (Kernel-based Virtual Machine) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm-rhev packages\nprovide the user-space component for running virtual machines that use\nKVM in environments managed by Red Hat products.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1179\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-img-rhev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-common-rhev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-rhev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-rhev-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:qemu-kvm-tools-rhev\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 7.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1179\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-img-rhev-2.12.0-18.el7_6.5\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-common-rhev-2.12.0-18.el7_6.5\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-rhev-2.12.0-18.el7_6.5\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-rhev-debuginfo-2.12.0-18.el7_6.5\")) flag++;\n if (rpm_check(release:\"RHEL7\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-rhev-2.12.0-18.el7_6.5\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img-rhev / qemu-kvm-common-rhev / qemu-kvm-rhev / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:46", "description": "An update for kernel is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux operating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* aio O_DIRECT writes to non-page-aligned file locations on ext4 can result in the overlapped portion of the page containing zeros (BZ#1686170)\n\n* Tolerate new s390x crypto hardware for migration (BZ#1695496)", "cvss3": {}, "published": "2019-05-14T00:00:00", "type": "nessus", "title": "RHEL 6 : kernel (RHSA-2019:1169) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:redhat:enterprise_linux:kernel", "p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists", "p-cpe:/a:redhat:enterprise_linux:kernel-debug", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-i686", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x", "p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64", "p-cpe:/a:redhat:enterprise_linux:kernel-devel", "p-cpe:/a:redhat:enterprise_linux:kernel-doc", "p-cpe:/a:redhat:enterprise_linux:kernel-firmware", "p-cpe:/a:redhat:enterprise_linux:kernel-headers", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump-debuginfo", "p-cpe:/a:redhat:enterprise_linux:kernel-kdump-devel", "p-cpe:/a:redhat:enterprise_linux:perf", "p-cpe:/a:redhat:enterprise_linux:perf-debuginfo", "p-cpe:/a:redhat:enterprise_linux:python-perf", "p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo", "cpe:/o:redhat:enterprise_linux:6"], "id": "REDHAT-RHSA-2019-1169.NASL", "href": "https://www.tenable.com/plugins/nessus/125038", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were \n# extracted from Red Hat Security Advisory RHSA-2019:1169. The text \n# itself is copyright (C) Red Hat, Inc.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125038);\n script_version(\"1.6\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1169\");\n script_xref(name:\"IAVA\", value:\"2019-A-0166\");\n\n script_name(english:\"RHEL 6 : kernel (RHSA-2019:1169) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Red Hat host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"An update for kernel is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe kernel packages contain the Linux kernel, the core of any Linux\noperating system.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\n\nBug Fix(es) :\n\n* aio O_DIRECT writes to non-page-aligned file locations on ext4 can\nresult in the overlapped portion of the page containing zeros\n(BZ#1686170)\n\n* Tolerate new s390x crypto hardware for migration (BZ#1695496)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/vulnerabilities/mds\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/errata/RHSA-2019:1169\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12126\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12127\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2018-12130\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://access.redhat.com/security/cve/cve-2019-11091\"\n );\n script_set_attribute(attribute:\"solution\", value:\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-abi-whitelists\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debug-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-i686\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-s390x\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-debuginfo-common-x86_64\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-firmware\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-headers\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:kernel-kdump-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:python-perf-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"linux_alt_patch_detect.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"misc_func.inc\");\ninclude(\"rpm.inc\");\ninclude(\"ksplice.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || \"Red Hat\" >!< release) audit(AUDIT_OS_NOT, \"Red Hat\");\nos_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Red Hat\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Red Hat 6.x\", \"Red Hat \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"s390\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Red Hat\", cpu);\n\nif (get_one_kb_item(\"Host/ksplice/kernel-cves\"))\n{\n rm_kb_item(name:\"Host/uptrack-uname-r\");\n cve_list = make_list(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n if (ksplice_cves_check(cve_list))\n {\n audit(AUDIT_PATCH_INSTALLED, \"KSplice hotfix for RHSA-2019:1169\");\n }\n else\n {\n __rpm_report = ksplice_reporting_text();\n }\n}\n\nyum_updateinfo = get_kb_item(\"Host/RedHat/yum-updateinfo\");\nif (!empty_or_null(yum_updateinfo)) \n{\n rhsa = \"RHSA-2019:1169\";\n yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);\n if (!empty_or_null(yum_report))\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : yum_report \n );\n exit(0);\n }\n else\n {\n audit_message = \"affected by Red Hat security advisory \" + rhsa;\n audit(AUDIT_OS_NOT, audit_message);\n }\n}\nelse\n{\n flag = 0;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", reference:\"kernel-abi-whitelists-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-debug-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-debug-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-debug-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-debug-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-debug-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-debug-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-debug-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-debug-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-debug-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-debuginfo-common-i686-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-debuginfo-common-s390x-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-debuginfo-common-x86_64-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", reference:\"kernel-doc-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", reference:\"kernel-firmware-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"kernel-headers-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-headers-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"kernel-headers-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-kdump-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-kdump-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"kernel-kdump-devel-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"python-perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"python-perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"python-perf-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"i686\", reference:\"python-perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"s390x\", reference:\"python-perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n if (rpm_check(release:\"RHEL6\", cpu:\"x86_64\", reference:\"python-perf-debuginfo-2.6.32-754.14.2.el6\")) flag++;\n\n if (flag)\n {\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get() + redhat_report_package_caveat()\n );\n exit(0);\n }\n else\n {\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"kernel / kernel-abi-whitelists / kernel-debug / etc\");\n }\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "The remote OracleVM system is missing necessary patches to address critical security updates :\n\n - BUILDINFO: OVMF commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen commit=3885a020649df84b883ea20d11ca15b7d7640201\n\n - BUILDINFO: QEMU upstream commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - x86/HVM: don't give the wrong impression of WRMSR succeeding (root) \n\n - BUILDINFO: OVMF commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen commit=71714f34026c4e0b105bf2def8d2dc4c7171d5b8\n\n - BUILDINFO: QEMU upstream commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - Red-tape: Update repo with new CVE for XSA-297 (Patrick Colp) [Orabug: 29725297] (CVE-2019-11091)\n\n - x86/spec-ctl: Expose X86_FEATURE_MD_CLEAR to guests (Patrick Colp) [Orabug: 29677162] (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: Introduce options to control VERW flushing (Andrew Cooper) [Orabug: 2977162] (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130) (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: Infrastructure to use VERW to flush pipeline buffers (Andrew Cooper) [Orabug: 29677162] (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130) (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: CPUID/MSR definitions for Microarchitectural Data Sampling (Andrew Cooper) [Orabug: 29677162] (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130) (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - BUILDINFO: OVMF commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen commit=0d8ecd7732e56484c10e4b584de17d360d940252\n\n - BUILDINFO: QEMU upstream commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - Config: Update git links to use linux-git.us.oracle.com (Patrick Colp) \n\n - gnttab: set page refcount for copy-on-grant-transfer (Jan Beulich)", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "OracleVM 3.4 : xen (OVMSA-2019-0016) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:oracle:vm:xen", "p-cpe:/a:oracle:vm:xen-tools", "cpe:/o:oracle:vm_server:3.4"], "id": "ORACLEVM_OVMSA-2019-0016.NASL", "href": "https://www.tenable.com/plugins/nessus/125104", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The package checks in this plugin were extracted from OracleVM\n# Security Advisory OVMSA-2019-0016.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125104);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n\n script_name(english:\"OracleVM 3.4 : xen (OVMSA-2019-0016) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks the RPM output for the updated packages.\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote OracleVM host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"The remote OracleVM system is missing necessary patches to address\ncritical security updates :\n\n - BUILDINFO: OVMF\n commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen\n commit=3885a020649df84b883ea20d11ca15b7d7640201\n\n - BUILDINFO: QEMU upstream\n commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional\n commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE\n commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS\n commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - x86/HVM: don't give the wrong impression of WRMSR\n succeeding (root) \n\n - BUILDINFO: OVMF\n commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen\n commit=71714f34026c4e0b105bf2def8d2dc4c7171d5b8\n\n - BUILDINFO: QEMU upstream\n commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional\n commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE\n commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS\n commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - Red-tape: Update repo with new CVE for XSA-297 (Patrick\n Colp) [Orabug: 29725297] (CVE-2019-11091)\n\n - x86/spec-ctl: Expose X86_FEATURE_MD_CLEAR to guests\n (Patrick Colp) [Orabug: 29677162] (CVE-2018-12126)\n (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: Introduce options to control VERW\n flushing (Andrew Cooper) [Orabug: 2977162]\n (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: Infrastructure to use VERW to flush\n pipeline buffers (Andrew Cooper) [Orabug: 29677162]\n (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n (CVE-2018-12126) (CVE-2018-12127) (CVE-2018-12130)\n\n - x86/spec-ctrl: CPUID/MSR definitions for\n Microarchitectural Data Sampling (Andrew Cooper)\n [Orabug: 29677162] (CVE-2018-12126) (CVE-2018-12127)\n (CVE-2018-12130) (CVE-2018-12126) (CVE-2018-12127)\n (CVE-2018-12130)\n\n - BUILDINFO: OVMF\n commit=173bf5c847e3ca8b42c11796ce048d8e2e916ff8\n\n - BUILDINFO: xen\n commit=0d8ecd7732e56484c10e4b584de17d360d940252\n\n - BUILDINFO: QEMU upstream\n commit=8bff6989bd0bafcc0ddf859c23ce6a2ff21a80ff\n\n - BUILDINFO: QEMU traditional\n commit=346fdd7edd73f8287d0d0a2bab9c67b71bc6b8ba\n\n - BUILDINFO: IPXE\n commit=9a93db3f0947484e30e753bbd61a10b17336e20e\n\n - BUILDINFO: SeaBIOS\n commit=7d9cbe613694924921ed1a6f8947d711c5832eee\n\n - Config: Update git links to use linux-git.us.oracle.com\n (Patrick Colp) \n\n - gnttab: set page refcount for copy-on-grant-transfer\n (Jan Beulich)\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://oss.oracle.com/pipermail/oraclevm-errata/2019-May/000939.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected xen / xen-tools packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:vm:xen\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:vm:xen-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:vm_server:3.4\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"OracleVM Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/OracleVM/release\", \"Host/OracleVM/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nrelease = get_kb_item(\"Host/OracleVM/release\");\nif (isnull(release) || \"OVS\" >!< release) audit(AUDIT_OS_NOT, \"OracleVM\");\nif (! preg(pattern:\"^OVS\" + \"3\\.4\" + \"(\\.[0-9]|$)\", string:release)) audit(AUDIT_OS_NOT, \"OracleVM 3.4\", \"OracleVM \" + release);\nif (!get_kb_item(\"Host/OracleVM/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"OracleVM\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nflag = 0;\nif (rpm_exists(rpm:\"xen-4.4.4-222\", release:\"OVS3.4\") && rpm_check(release:\"OVS3.4\", reference:\"xen-4.4.4-222.0.4.el6\")) flag++;\nif (rpm_exists(rpm:\"xen-tools-4.4.4-222\", release:\"OVS3.4\") && rpm_check(release:\"OVS3.4\", reference:\"xen-tools-4.4.4-222.0.4.el6\")) flag++;\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"xen / xen-tools\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:53", "description": "From Red Hat Security Advisory 2019:1177 :\n\nAn update for libvirt is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Oracle Linux 7 : libvirt (ELSA-2019-1177) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:oracle:linux:libvirt", "p-cpe:/a:oracle:linux:libvirt-admin", "p-cpe:/a:oracle:linux:libvirt-bash-completion", "p-cpe:/a:oracle:linux:libvirt-client", "p-cpe:/a:oracle:linux:libvirt-daemon", "p-cpe:/a:oracle:linux:libvirt-daemon-config-network", "p-cpe:/a:oracle:linux:libvirt-daemon-config-nwfilter", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-interface", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-lxc", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-network", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-nodedev", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-nwfilter", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-qemu", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-secret", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-core", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-disk", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-gluster", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-iscsi", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-logical", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-mpath", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-rbd", "p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-scsi", "p-cpe:/a:oracle:linux:libvirt-daemon-kvm", "p-cpe:/a:oracle:linux:libvirt-daemon-lxc", "p-cpe:/a:oracle:linux:libvirt-devel", "p-cpe:/a:oracle:linux:libvirt-docs", "p-cpe:/a:oracle:linux:libvirt-libs", "p-cpe:/a:oracle:linux:libvirt-lock-sanlock", "p-cpe:/a:oracle:linux:libvirt-login-shell", "p-cpe:/a:oracle:linux:libvirt-nss", "cpe:/o:oracle:linux:7"], "id": "ORACLELINUX_ELSA-2019-1177.NASL", "href": "https://www.tenable.com/plugins/nessus/125188", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Red Hat Security Advisory RHSA-2019:1177 and \n# Oracle Linux Security Advisory ELSA-2019-1177 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125188);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1177\");\n\n script_name(english:\"Oracle Linux 7 : libvirt (ELSA-2019-1177) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Oracle Linux host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"From Red Hat Security Advisory 2019:1177 :\n\nAn update for libvirt is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://oss.oracle.com/pipermail/el-errata/2019-May/008734.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected libvirt packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-admin\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-bash-completion\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-config-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-config-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-interface\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-network\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-nodedev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-nwfilter\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-qemu\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-secret\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-core\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-disk\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-gluster\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-iscsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-logical\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-mpath\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-rbd\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-driver-storage-scsi\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-daemon-lxc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-docs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-libs\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-login-shell\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/OracleLinux\")) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nos_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Oracle Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Oracle Linux 7\", \"Oracle Linux \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Oracle Linux\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nflag = 0;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-admin-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-bash-completion-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-client-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-network-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-config-nwfilter-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-interface-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-lxc-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-network-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nodedev-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-nwfilter-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-qemu-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-secret-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-core-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-disk-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-gluster-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-iscsi-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-logical-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-mpath-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-rbd-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-driver-storage-scsi-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-kvm-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-daemon-lxc-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-devel-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-docs-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-libs-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-login-shell-4.5.0-10.0.1.el7_6.9\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"libvirt-nss-4.5.0-10.0.1.el7_6.9\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-admin / libvirt-bash-completion / libvirt-client / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:34", "description": "From Red Hat Security Advisory 2019:1178 :\n\nAn update for qemu-kvm is now available for Red Hat Enterprise Linux 7.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Oracle Linux 7 : qemu-kvm (ELSA-2019-1178) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:oracle:linux:qemu-img", "p-cpe:/a:oracle:linux:qemu-kvm", "p-cpe:/a:oracle:linux:qemu-kvm-common", "p-cpe:/a:oracle:linux:qemu-kvm-tools", "cpe:/o:oracle:linux:7"], "id": "ORACLELINUX_ELSA-2019-1178.NASL", "href": "https://www.tenable.com/plugins/nessus/125189", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Red Hat Security Advisory RHSA-2019:1178 and \n# Oracle Linux Security Advisory ELSA-2019-1178 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125189);\n script_version(\"1.3\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1178\");\n\n script_name(english:\"Oracle Linux 7 : qemu-kvm (ELSA-2019-1178) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Oracle Linux host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"From Red Hat Security Advisory 2019:1178 :\n\nAn update for qemu-kvm is now available for Red Hat Enterprise Linux\n7.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://oss.oracle.com/pipermail/el-errata/2019-May/008735.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected qemu-kvm packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm-common\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:7\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/16\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/OracleLinux\")) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nos_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Oracle Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^7([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Oracle Linux 7\", \"Oracle Linux \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Oracle Linux\", cpu);\nif (\"x86_64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"x86_64\", cpu);\n\nflag = 0;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"qemu-img-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"qemu-kvm-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"qemu-kvm-common-1.5.3-160.el7_6.2\")) flag++;\nif (rpm_check(release:\"EL7\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-1.5.3-160.el7_6.2\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-img / qemu-kvm / qemu-kvm-common / qemu-kvm-tools\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:24", "description": "From Red Hat Security Advisory 2019:1180 :\n\nAn update for libvirt is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of virtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Oracle Linux 6 : libvirt (ELSA-2019-1180) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:oracle:linux:libvirt", "p-cpe:/a:oracle:linux:libvirt-client", "p-cpe:/a:oracle:linux:libvirt-devel", "p-cpe:/a:oracle:linux:libvirt-lock-sanlock", "p-cpe:/a:oracle:linux:libvirt-python", "cpe:/o:oracle:linux:6"], "id": "ORACLELINUX_ELSA-2019-1180.NASL", "href": "https://www.tenable.com/plugins/nessus/125111", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Red Hat Security Advisory RHSA-2019:1180 and \n# Oracle Linux Security Advisory ELSA-2019-1180 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125111);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1180\");\n\n script_name(english:\"Oracle Linux 6 : libvirt (ELSA-2019-1180) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Oracle Linux host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"From Red Hat Security Advisory 2019:1180 :\n\nAn update for libvirt is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nThe libvirt library contains a C API for managing and interacting with\nthe virtualization capabilities of Linux and other operating systems.\nIn addition, libvirt provides tools for remote management of\nvirtualized systems.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://oss.oracle.com/pipermail/el-errata/2019-May/008727.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected libvirt packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-client\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-lock-sanlock\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libvirt-python\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/OracleLinux\")) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nos_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Oracle Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Oracle Linux 6\", \"Oracle Linux \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Oracle Linux\", cpu);\n\nflag = 0;\nif (rpm_check(release:\"EL6\", reference:\"libvirt-0.10.2-64.0.1.el6_10.1\")) flag++;\nif (rpm_check(release:\"EL6\", reference:\"libvirt-client-0.10.2-64.0.1.el6_10.1\")) flag++;\nif (rpm_check(release:\"EL6\", reference:\"libvirt-devel-0.10.2-64.0.1.el6_10.1\")) flag++;\nif (rpm_check(release:\"EL6\", cpu:\"x86_64\", reference:\"libvirt-lock-sanlock-0.10.2-64.0.1.el6_10.1\")) flag++;\nif (rpm_check(release:\"EL6\", reference:\"libvirt-python-0.10.2-64.0.1.el6_10.1\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"libvirt / libvirt-client / libvirt-devel / libvirt-lock-sanlock / etc\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:15:11", "description": "From Red Hat Security Advisory 2019:1181 :\n\nAn update for qemu-kvm is now available for Red Hat Enterprise Linux 6.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm packages provide the user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a mechanism used by modern CPUs when a cache-miss is made on L1 CPU cache. If an attacker can generate a load operation that would create a page fault, the execution will continue speculatively with incorrect data from the fill buffer while the data is fetched from higher level caches. This response time can be measured to infer data in the fill buffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level micro-optimizations to improve the performance of writing data back to CPU caches. The write operation is split into STA (STore Address) and STD (STore Data) sub-operations. These sub-operations allow the processor to hand-off address generation logic into these sub-operations for optimized writes. Both of these sub-operations write to a shared distributed processor structure called the 'processor store buffer'. As a result, an unprivileged attacker could use this flaw to read private data resident within the CPU's processor store buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load operations from memory or IO. During a load operation, the load port receives data from the memory or IO subsystem and then provides the data to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table until overwritten by newer operations. Certain load-port operations triggered by an attacker can be used to reveal data about previous stale requests leaking data back to the attacker via a timing side-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.", "cvss3": {}, "published": "2019-05-15T00:00:00", "type": "nessus", "title": "Oracle Linux 6 : qemu-kvm (ELSA-2019-1181) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2020-01-17T00:00:00", "cpe": ["p-cpe:/a:oracle:linux:qemu-guest-agent", "p-cpe:/a:oracle:linux:qemu-img", "p-cpe:/a:oracle:linux:qemu-kvm", "p-cpe:/a:oracle:linux:qemu-kvm-tools", "cpe:/o:oracle:linux:6"], "id": "ORACLELINUX_ELSA-2019-1181.NASL", "href": "https://www.tenable.com/plugins/nessus/125112", "sourceData": "#\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Red Hat Security Advisory RHSA-2019:1181 and \n# Oracle Linux Security Advisory ELSA-2019-1181 respectively.\n#\n\ninclude(\"compat.inc\");\n\nif (description)\n{\n script_id(125112);\n script_version(\"1.4\");\n script_cvs_date(\"Date: 2020/01/17\");\n\n script_cve_id(\"CVE-2018-12126\", \"CVE-2018-12127\", \"CVE-2018-12130\", \"CVE-2019-11091\");\n script_xref(name:\"RHSA\", value:\"2019:1181\");\n\n script_name(english:\"Oracle Linux 6 : qemu-kvm (ELSA-2019-1181) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)\");\n script_summary(english:\"Checks rpm output for the updated packages\");\n\n script_set_attribute(\n attribute:\"synopsis\", \n value:\"The remote Oracle Linux host is missing one or more security updates.\"\n );\n script_set_attribute(\n attribute:\"description\", \n value:\n\"From Red Hat Security Advisory 2019:1181 :\n\nAn update for qemu-kvm is now available for Red Hat Enterprise Linux\n6.\n\nRed Hat Product Security has rated this update as having a security\nimpact of Important. A Common Vulnerability Scoring System (CVSS) base\nscore, which gives a detailed severity rating, is available for each\nvulnerability from the CVE link(s) in the References section.\n\nKernel-based Virtual Machine (KVM) is a full virtualization solution\nfor Linux on a variety of architectures. The qemu-kvm packages provide\nthe user-space component for running virtual machines that use KVM.\n\nSecurity Fix(es) :\n\n* A flaw was found in the implementation of the 'fill buffer', a\nmechanism used by modern CPUs when a cache-miss is made on L1 CPU\ncache. If an attacker can generate a load operation that would create\na page fault, the execution will continue speculatively with incorrect\ndata from the fill buffer while the data is fetched from higher level\ncaches. This response time can be measured to infer data in the fill\nbuffer. (CVE-2018-12130)\n\n* Modern Intel microprocessors implement hardware-level\nmicro-optimizations to improve the performance of writing data back to\nCPU caches. The write operation is split into STA (STore Address) and\nSTD (STore Data) sub-operations. These sub-operations allow the\nprocessor to hand-off address generation logic into these\nsub-operations for optimized writes. Both of these sub-operations\nwrite to a shared distributed processor structure called the\n'processor store buffer'. As a result, an unprivileged attacker could\nuse this flaw to read private data resident within the CPU's processor\nstore buffer. (CVE-2018-12126)\n\n* Microprocessors use a 'load port' subcomponent to perform load\noperations from memory or IO. During a load operation, the load port\nreceives data from the memory or IO subsystem and then provides the\ndata to the CPU registers and operations in the CPU's pipelines.\nStale load operations results are stored in the 'load port' table\nuntil overwritten by newer operations. Certain load-port operations\ntriggered by an attacker can be used to reveal data about previous\nstale requests leaking data back to the attacker via a timing\nside-channel. (CVE-2018-12127)\n\n* Uncacheable memory on some microprocessors utilizing speculative\nexecution may allow an authenticated user to potentially enable\ninformation disclosure via a side channel with local access.\n(CVE-2019-11091)\n\nFor more details about the security issue(s), including the impact, a\nCVSS score, acknowledgments, and other related information, refer to\nthe CVE page(s) listed in the References section.\"\n );\n script_set_attribute(\n attribute:\"see_also\",\n value:\"https://oss.oracle.com/pipermail/el-errata/2019-May/008728.html\"\n );\n script_set_attribute(\n attribute:\"solution\", \n value:\"Update the affected qemu-kvm packages.\"\n );\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2019-11091\");\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-guest-agent\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-img\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:qemu-kvm-tools\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:6\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2019/05/30\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2019/05/15\");\n script_set_attribute(attribute:\"in_the_news\", value:\"true\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_copyright(english:\"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\");\n\n exit(0);\n}\n\n\ninclude(\"audit.inc\");\ninclude(\"global_settings.inc\");\ninclude(\"rpm.inc\");\n\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/OracleLinux\")) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nrelease = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, \"Oracle Linux\");\nos_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Oracle Linux\");\nos_ver = os_ver[1];\nif (! preg(pattern:\"^6([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, \"Oracle Linux 6\", \"Oracle Linux \" + os_ver);\n\nif (!get_kb_item(\"Host/RedHat/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\ncpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Oracle Linux\", cpu);\n\nflag = 0;\nif (rpm_check(release:\"EL6\", reference:\"qemu-guest-agent-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"EL6\", cpu:\"x86_64\", reference:\"qemu-img-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"EL6\", cpu:\"x86_64\", reference:\"qemu-kvm-0.12.1.2-2.506.el6_10.3\")) flag++;\nif (rpm_check(release:\"EL6\", cpu:\"x86_64\", reference:\"qemu-kvm-tools-0.12.1.2-2.506.el6_10.3\")) flag++;\n\n\nif (flag)\n{\n if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());\n else security_warning(0);\n exit(0);\n}\nelse\n{\n tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"qemu-guest-agent / qemu-img / qemu-kvm / qemu-kvm-tools\");\n}\n", "cvss": {"score": 4.7, "vector": "AV:L/AC:M/Au:N/C:C/I:N/A:N"}}, {"lastseen": "2022-02-28T13:14:22", "description": "The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2019-1168 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode- update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {}, "published": "2019-05-16T00:00:00", "type": "nessus", "title": "Oracle Linux 7 : kernel (ELSA-2019-1168)", "bulletinFamily": "scanner", "cvss2": {}, "cvelist": ["CVE-2018-12126", "CVE-2018-12127", "CVE-2018-12130", "CVE-2019-11091"], "modified": "2021-09-08T00:00:00", "cpe": ["cpe:/o:oracle:linux:7", "p-cpe:/a:oracle:linux:bpftool", "p-cpe:/a:oracle:linux:kernel", "p-cpe:/a:oracle:linux:kernel-abi-whitelists", "p-cpe:/a:oracle:linux:kernel-debug", "p-cpe:/a:oracle:linux:kernel-debug-devel", "p-cpe:/a:oracle:linux:kernel-devel", "p-cpe:/a:oracle:linux:kernel-headers", "p-cpe:/a:oracle:linux:kernel-tools", "p-cpe:/a:oracle:linux:kernel-tools-libs", "p-cpe:/a:oracle:linux:kernel-tools-libs-devel", "p-cpe:/a:oracle:linux:perf", "p-cpe:/a:oracle:linux:python-perf"], "id": "ORACLELINUX_ELSA-2019-1168.NASL", "href": "https://www.tenable.com/plugins/nessus/125187", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable Network Security, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Oracle Linux Security Advisory ELSA-2019-1168.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(125187);\n script_version(\"1.6\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2021/09/08\");\n\n script_cve_id(\n \"CVE-2018-12126\",\n \"CVE-2018-12127\",\n \"CVE-2018-12130\",\n \"CVE-2019-11091\"\n );\n script_xref(name:\"RHSA\", value:\"2019:1168\");\n\n script_name(english:\"Oracle Linux 7 : kernel (ELSA-2019-1168)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Oracle Linux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nELSA-2019-1168 advisory.\n\n - Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12126)\n\n - Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12130)\n\n - Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing\n speculative execution may allow an authenticated user to potentially enable information disclosure via a\n side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2018-12127)\n\n - Microarchitectural Data Sampling Uncacheable Memory (MDSUM): Uncacheable memory on some microprocessors\n utilizing speculative execution may allow an authenticated user to potentially enable information\n disclosure via a side channel with local access. A list of impacted products can be found here:\n https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-\n update-guidance_05132019.pdf (CVE-2019-11091)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://linux.oracle.com/errata/ELSA-2019-1168.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:L/AC:M/Au:N/C:C/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"
RHEL 7 : kernel (RHSA-2019:1171) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)
