Lucene search

K
nessusThis script is Copyright (C) 2013-2021 and is owned by Tenable, Inc. or an Affiliate thereof.ORACLELINUX_ELSA-2013-0277.NASL
HistoryJul 12, 2013 - 12:00 a.m.

Oracle Linux 6 : dnsmasq (ELSA-2013-0277)

2013-07-1200:00:00
This script is Copyright (C) 2013-2021 and is owned by Tenable, Inc. or an Affiliate thereof.
www.tenable.com
24

From Red Hat Security Advisory 2013:0277 :

Updated dnsmasq packages that fix one security issue, one bug, and add various enhancements are now available for Red Hat Enterprise Linux 6.

The Red Hat Security Response Team has rated this update as having moderate security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section.

The dnsmasq packages contain Dnsmasq, a lightweight DNS (Domain Name Server) forwarder and DHCP (Dynamic Host Configuration Protocol) server.

It was discovered that dnsmasq, when used in combination with certain libvirtd configurations, could incorrectly process network packets from network interfaces that were intended to be prohibited. A remote, unauthenticated attacker could exploit this flaw to cause a denial of service via DNS amplification attacks. (CVE-2012-3411)

In order to fully address this issue, libvirt package users are advised to install updated libvirt packages. Refer to RHSA-2013:0276 for additional information.

This update also fixes the following bug :

  • Due to a regression, the lease change script was disabled.
    Consequently, the ‘dhcp-script’ option in the /etc/dnsmasq.conf configuration file did not work. This update corrects the problem and the ‘dhcp-script’ option now works as expected. (BZ#815819)

This update also adds the following enhancements :

  • Prior to this update, dnsmasq did not validate that the tftp directory given actually existed and was a directory. Consequently, configuration errors were not immediately reported on startup. This update improves the code to validate the tftp root directory option.
    As a result, fault finding is simplified especially when dnsmasq is called by external processes such as libvirt. (BZ#824214)

  • The dnsmasq init script used an incorrect Process Identifier (PID) in the ‘stop’, ‘restart’, and ‘condrestart’ commands. Consequently, if there were some dnsmasq instances running besides the system one started by the init script, then repeated calling of ‘service dnsmasq’ with ‘stop’ or ‘restart’ would kill all running dnsmasq instances, including ones not started with the init script. The dnsmasq init script code has been corrected to obtain the correct PID when calling the ‘stop’, ‘restart’, and ‘condrestart’ commands. As a result, if there are dnsmasq instances running in addition to the system one started by the init script, then by calling ‘service dnsmasq’ with ‘stop’ or ‘restart’ only the system one is stopped or restarted.
    (BZ#850944)

  • When two or more dnsmasq processes were running with DHCP enabled on one interface, DHCP RELEASE packets were sometimes lost. Consequently, when two or more dnsmasq processes were running with DHCP enabled on one interface, releasing IP addresses sometimes failed. This update sets the SO_BINDTODEVICE socket option on DHCP sockets if running dnsmasq with DHCP enabled on one interface. As a result, when two or more dnsmasq processes are running with DHCP enabled on one interface, they can release IP addresses as expected. (BZ#887156)

All users of dnsmasq are advised to upgrade to these updated packages, which fix these issues and add these enhancements.

#%NASL_MIN_LEVEL 70300
#
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from Red Hat Security Advisory RHSA-2013:0277 and 
# Oracle Linux Security Advisory ELSA-2013-0277 respectively.
#

include('deprecated_nasl_level.inc');
include('compat.inc');

if (description)
{
  script_id(68738);
  script_version("1.9");
  script_set_attribute(attribute:"plugin_modification_date", value:"2021/01/14");

  script_cve_id("CVE-2012-3411");
  script_bugtraq_id(54353);
  script_xref(name:"RHSA", value:"2013:0277");

  script_name(english:"Oracle Linux 6 : dnsmasq (ELSA-2013-0277)");
  script_summary(english:"Checks rpm output for the updated packages");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote Oracle Linux host is missing one or more security updates."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"From Red Hat Security Advisory 2013:0277 :

Updated dnsmasq packages that fix one security issue, one bug, and add
various enhancements are now available for Red Hat Enterprise Linux 6.

The Red Hat Security Response Team has rated this update as having
moderate security impact. A Common Vulnerability Scoring System (CVSS)
base score, which gives a detailed severity rating, is available from
the CVE link in the References section.

The dnsmasq packages contain Dnsmasq, a lightweight DNS (Domain Name
Server) forwarder and DHCP (Dynamic Host Configuration Protocol)
server.

It was discovered that dnsmasq, when used in combination with certain
libvirtd configurations, could incorrectly process network packets
from network interfaces that were intended to be prohibited. A remote,
unauthenticated attacker could exploit this flaw to cause a denial of
service via DNS amplification attacks. (CVE-2012-3411)

In order to fully address this issue, libvirt package users are
advised to install updated libvirt packages. Refer to RHSA-2013:0276
for additional information.

This update also fixes the following bug :

* Due to a regression, the lease change script was disabled.
Consequently, the 'dhcp-script' option in the /etc/dnsmasq.conf
configuration file did not work. This update corrects the problem and
the 'dhcp-script' option now works as expected. (BZ#815819)

This update also adds the following enhancements :

* Prior to this update, dnsmasq did not validate that the tftp
directory given actually existed and was a directory. Consequently,
configuration errors were not immediately reported on startup. This
update improves the code to validate the tftp root directory option.
As a result, fault finding is simplified especially when dnsmasq is
called by external processes such as libvirt. (BZ#824214)

* The dnsmasq init script used an incorrect Process Identifier (PID)
in the 'stop', 'restart', and 'condrestart' commands. Consequently, if
there were some dnsmasq instances running besides the system one
started by the init script, then repeated calling of 'service dnsmasq'
with 'stop' or 'restart' would kill all running dnsmasq instances,
including ones not started with the init script. The dnsmasq init
script code has been corrected to obtain the correct PID when calling
the 'stop', 'restart', and 'condrestart' commands. As a result, if
there are dnsmasq instances running in addition to the system one
started by the init script, then by calling 'service dnsmasq' with
'stop' or 'restart' only the system one is stopped or restarted.
(BZ#850944)

* When two or more dnsmasq processes were running with DHCP enabled on
one interface, DHCP RELEASE packets were sometimes lost. Consequently,
when two or more dnsmasq processes were running with DHCP enabled on
one interface, releasing IP addresses sometimes failed. This update
sets the SO_BINDTODEVICE socket option on DHCP sockets if running
dnsmasq with DHCP enabled on one interface. As a result, when two or
more dnsmasq processes are running with DHCP enabled on one interface,
they can release IP addresses as expected. (BZ#887156)

All users of dnsmasq are advised to upgrade to these updated packages,
which fix these issues and add these enhancements."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://oss.oracle.com/pipermail/el-errata/2013-February/003276.html"
  );
  script_set_attribute(
    attribute:"solution", 
    value:"Update the affected dnsmasq packages."
  );
  script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:N/I:N/A:P");
  script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:ND");
  script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"false");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:linux:dnsmasq");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:linux:dnsmasq-utils");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:oracle:linux:6");

  script_set_attribute(attribute:"vuln_publication_date", value:"2013/03/05");
  script_set_attribute(attribute:"patch_publication_date", value:"2013/02/25");
  script_set_attribute(attribute:"plugin_publication_date", value:"2013/07/12");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2013-2021 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"Oracle Linux Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/OracleLinux", "Host/RedHat/release", "Host/RedHat/rpm-list");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("rpm.inc");


if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
if (!get_kb_item("Host/OracleLinux")) audit(AUDIT_OS_NOT, "Oracle Linux");
release = get_kb_item("Host/RedHat/release");
if (isnull(release) || !pregmatch(pattern: "Oracle (?:Linux Server|Enterprise Linux)", string:release)) audit(AUDIT_OS_NOT, "Oracle Linux");
os_ver = pregmatch(pattern: "Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\.[0-9]+)?)", string:release);
if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "Oracle Linux");
os_ver = os_ver[1];
if (! preg(pattern:"^6([^0-9]|$)", string:os_ver)) audit(AUDIT_OS_NOT, "Oracle Linux 6", "Oracle Linux " + os_ver);

if (!get_kb_item("Host/RedHat/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Oracle Linux", cpu);

flag = 0;
if (rpm_check(release:"EL6", reference:"dnsmasq-2.48-13.el6")) flag++;
if (rpm_check(release:"EL6", reference:"dnsmasq-utils-2.48-13.el6")) flag++;


if (flag)
{
  if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
  else security_warning(0);
  exit(0);
}
else
{
  tested = pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "dnsmasq / dnsmasq-utils");
}
VendorProductVersionCPE
oraclelinuxdnsmasqp-cpe:/a:oracle:linux:dnsmasq
oraclelinuxdnsmasq-utilsp-cpe:/a:oracle:linux:dnsmasq-utils
oraclelinux6cpe:/o:oracle:linux:6