Do-it-yourself unlock phone password-vulnerability warning-the black bar safety net

Crash
This bar is estimated to be debugging the used,with caution,some crashes only under the battery.
#9 9 9 89 2 6 6# display the receiving channel number and received signal strength;
#9 9 9 87 8 6# display the contents of the boot time and the boot to the current a long time.
Press-after displaying the latest of the boot to the current a long time;
Then-after the display last boot time;
Then press-after displaying the last shutdown time and the last switch of the machine when long;
#9 9 9 85 6 4 6# change power-on display state(the GSM LOGO SET); and
2 7 6 73 8 5 5#or9 9 9 89 4 7# to put the phone in Flash IMEI code restore to the EEPROM chips, the
Then use the*#0 6#to see the IMEI is to be changed;
2 7 6 79 2 7# This is the I5 version to solve the WAP settings from the From the Internet method;
2 7 6 72 8 7 8# machine master reset! Will delete the phone in the phone book and phone set;
#9 9 9 87 6#or*#9 9 9 8*0 0 7 6# on your phone will have
“produt number”(Prodution No)prompt,
If your Samsung phone is licensed, then, in the“number”following a string of numbers,
The parallel words are not;

S508 test command Daquan
S500 some function of the instruction is the previous models did not,and the function is very powerful,
In particular there are two unlock command,regardless of the phone opened what lock
Phone lock, SIM card lock, network lock, user lock…
Without the data line,as long as the input command will immediately"full"release,also can retain the phone book!
--------------------------------------------------------------------------------
The following content is required to reply to browse
*#0 6# displays International Mobile Equipment identity IMEI code
#*1 2 0 0# AFC DAC Val
#*1 3 0 0# IMEI
#*1 4 0 0# IMSI
#*5 1 1 1# status
#*2 5 6 5# (BLOK) no blocking general defense
#*3 3 5 3# (DEKE) general defense code erased
#*7 2 2 2# (SCAC) - Class C GSM
#*7 2 5 2# (SCLB) Class B GPRS
#*7 2 7 1# (SCS1) Multi slot Class 1 GPRS
#*7 2 7 4# (SCS4) Multi Slot Class 4 GPRS
#*2 7 8 7# CRTP on/off force detection of the battery temperature on/off
#*3 7 3 7# status , AFC val
#*5 1 3 2# (L1DA) status
#*5 1 3 3# (L1DE) status
#*7 2 8 8# (PRACTICE) GPRS attached/detached GPRS incidental/release
#*7 2 8 7# (SATS) GPRS att/det status GPRS comes with-like@
#*7 6 6 6# (RNMO) status
#*7 2 8 4# (SBTG) Set Class B to GPRS
#*2 2 5 6# (BALO) Calibr.- info
#*2 2 8 6# (BATA) Databattery battery data
#*7 3 5 2# BVMC set 0h debug battery
#*2 5 5 8# Time ON for debug battery
#*2 4 7 4# cmd set debug battery
#*2 5 2 7# GPRStching 4,8,9,10
#*2 6 7 9# Copycat feature ON/OFF
#*3 9 4 0# ext. looptest 9600bps
#*3 9 4 1# ext. looptest 115200bps
#*4 2 6 3# (HAND) Handsfree mode ON/OFF speakerphone on/off
#*4 7 0 0# (HR00) Half Rate on/off default is on
Recommended turned on,in order to increase the cell phone continuous talk time
#*3 3 7 0# (EFR0) EFT on/off Enhanced Full Rate on/off
The preset is open,advice open,to improve call audio quality.
#*7 4 6 2# (SIMA) SIM phase SIM card function type
#*7 9 8 3# Voltage/Freq ON/OFF
#*7 9 8 6# Voltage ON/OFF
#*7 6 9 3# (SMXD) Sleep Act/Deact power-saving mode switch
#*8 4 6 2# Sleeptime status of the power saving mode state
#*7 6 8 3# (SMVE) Sleep variable
#*5 1 7 6# (L1PN) L1 sleep status
#*7 6 3 2# (SMDB) Sleep mode debug releasing the power saving mode
#*7 6 7 3# (SMRE) Sleep mode reset power saving mode reset
#*8 4 6 6# old time - sleep,SMReq,awake
#*2 2 5 5# call failed mode…
#*5 1 8 7# (L1TR) L1C2G trace
#*5 3 7 6# ------------------ reboot?
#*6 8 3 7# Official Software Version official software version?
#*7 5 2 4# KCGPRS
#*7 5 6 2# LOCI GPRS
#*7 6 3 8# RLC ON/OFF
#*2 3 3 7# Parmanent Registration Beep
#2 8 3 4# Audio Path is opened audio path
#3 2 7 0# (DCS0) DCS support on/off support 1800M on/off
#3 2 8 2# Data on/off
#3 4 7 6# EGSM on/off
#3 6 7 6# Flash volume formatted with after you need to delete all phone book
#4 6 7 4# IMSI
#4 7 6 0# GSM, active/deactive
#5 1 7 1# (L1P1) status
#5 1 7 2# L1P2
#5 1 7 3# L1P3
#7 3 2 6# Accessory : Vibrator
#7 7 6 2# (SSMB) SMS Bearer CS, active/deactive
#8 4 6 5# (TINL) Time in L1
#9 7 9 5# Wtls key Reset
#2 2 5 2# (CALC) Current CAL
#2 8 3 6# AVDDSS Management ON/OFF
#3 8 7 7# Dump of SPY trace
#2 6 7 7# (AMRS) AMR status: none/Half Rate/Full Rate
#2 2 5 5# (CALL) Call Log display the call log
#8 9 9 93 2 4# (DAG) Netmon network receive state
#8 9 9 93 7 7# (ERR) Error Log handset wrong record
#8 9 9 96 3 6# (MEM) memory status handset Memory status
#8 9 9 98 3 7 8# (TEST) Test Mode test mode
Display version, hardware version, software version, IMEI, and hardware test, vibration test, audio set speaker gain,
Microphone gain, music gain, speaker volume, normally, mobile phones, Handsfree, headset, key, normal, phone,
Hands-free, headset, tone calibration gain, speaker volume（headset））, Battery information, lock state, and SIM card information, SST, CPHS, Telephone directories, exit, short information, language, IMSI, and product and other information.
#4 7 7 78 6 6 5# (GPRSTOOL) GPRS setting
#8 9 9 95 2 3# (LCD) in Main LCD Brightness within the main screen luminosity adjustment
#8 9 9 93 8 2 5 5 2 3# (ETALLCD) External LCD external screen luminosity adjustment
#9 9 9 9# Firmware version software version
#8 9 9 98 3 7 6 2 6 3# Firmware detail detail all of the version of the software
#8 8 8 8# H/W version displays the hardware version
#8 3 7 7 4 6 6# (VERSHNO) S/W & H/W version
#6 4 2 0# (MIC0) MIC off
#6 4 2 1# (MIC1) MIC on
#6 4 2 2# (MICA) MIC dep Rxdata
#6 4 2 8# (MICT) MIC measurement
#3 2 3 0# TRACE, enable
#3 2 3 1# DCD, enable
#3 2 3 2# Show DCD/TRACE mode DCD/TRACE status
#7 2 6 3 8 6 7# RAMDUMP on/off
#7 4 6 5 6 2 5# All lock status phone lock status
＊＊＊The following command is not recommended,otherwise you need to lift the phone lock!
7 4 6 5 6 2 56 3 8# (SIMLOCKNET) Network Lock enable opens the network lock
#7 4 6 5 6 2 56 3 8# disable network lock with password off except the network lock
7 4 6 5 6 2 57 8 2# (SIMLOCKSUB) Subnet Lock enable
#7 4 6 5 6 2 57 8 2# lifted Subnet lock
7 4 6 5 6 2 57 7# (SIMLOCKSP) opens the SP lock
#7 4 6 5 6 2 57 7#
7 4 6 5 6 2 52 7# (SIMLOCKCP) opens the CP lock
#7 4 6 5 6 2 52 7#
7 4 6 5 6 2 57 4 6# (SIMLOCKSIM) opens the SIM card lock
#7 4 6 5 6 2 57 4 6#
7 4 6 5 6 2 52 2 8# (SIMLOCKACT)
#7 4 6 5 6 2 52 2 8#
7 4 6 5 6 2 52 8 6 3 8# (SIMLOCKATNET) the network locks automatically opens
#7 4 6 5 6 2 52 8 6 3 8#
7 4 6 5 6 2 52 8 7 8 2#n (SIMLOCKATSUB) Subnet lock automatically opens
#7 4 6 5 6 2 52 8 7 8 2#
7 4 6 5 6 2 52 8 7 7# (SIMLOCKATSP) automatically opens SP lock
#7 4 6 5 6 2 52 8 7 7#
7 4 6 5 6 2 52 8 2 7# (SIMLOCKATCP) automatically opens CP lock
#7 4 6 5 6 2 52 8 2 7#
7 4 6 5 6 2 52 8 7 4 6# (SIMLOCKATSIM) automatically opens SIM lock
#7 4 6 5 6 2 52 8 7 4 6#
＊＊＊
#7 7 2 8# RSAV, the phone is set to reset,keep the phone book
2 7 6 73 8 5 5# E2P Full Reset Telephone EEPROM always reset（repair software fault)
2 7 6 72 8 7 8# E2P custom the Reset Telephone current set-reset-phone unlock)
2 7 6 79 2 7# E2P wap reset
2 7 6 74 9 9 2 7# Germany wap preset
2 7 6 74 4 9 2 7# England wap preset
2 7 6 73 9 9 2 7# Italy wap preset
2 7 6 73 3 9 2 7# France wap preset
2 7 6 78 6 9 2 7# China wap preset
2 7 6 78 5 2 9 2 7# Hong Kong wap preset
2 7 6 77 3 7 3 8 9 2 7# RESETWAP
-0718#, thelong press, choose 1 Item 1, The wait can be.

IMEI number: * # 0 6 #
Software version: # # 9 1 4 0 * 8 3 # 7 5 * 2 #
Sagem
IMEI number: * # 0 6 #
Service Menu access: MENU 5 1 1 #
Panasonic
GD55 hidden Menu *#3 6 9#
Alcatel instructions
Alcatel:
Alcatel OT221/2 2 0 unlock: 2 5 2 2 8 3 5 2/ALCATEL+D
Alcatel OT301/3 0 2 unlock: 8 3 2 2 7 4 2 3
Alcatel OT500/7 0 0 unlock: 2 5 2 2 8 3 5 2
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0