OAUTH2 bearer bypass in connection re-use. (CVE-2022-22576) Credential leak on redirect. (CVE-2022-27774) Bad local IPv6 connection reuse. (CVE-2022-27775) Auth/cookie leak on redirect. (CVE-2022-27776)
{"nessus": [{"lastseen": "2023-01-10T19:20:15", "description": "The version of curl installed on the remote host is prior to 7.79.1-2. It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2-2022-1792 advisory.\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-05-05T00:00:00", "type": "nessus", "title": "Amazon Linux 2 : curl (ALAS-2022-1792)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:amazon:linux:curl", "p-cpe:/a:amazon:linux:curl-debuginfo", "p-cpe:/a:amazon:linux:libcurl", "p-cpe:/a:amazon:linux:libcurl-devel", "cpe:/o:amazon:linux:2"], "id": "AL2_ALAS-2022-1792.NASL", "href": "https://www.tenable.com/plugins/nessus/160577", "sourceData": "##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Amazon Linux 2 Security Advisory ALAS-2022-1792.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(160577);\n script_version(\"1.6\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Amazon Linux 2 : curl (ALAS-2022-1792)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Amazon Linux 2 host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"The version of curl installed on the remote host is prior to 7.79.1-2. It is, therefore, affected by multiple\nvulnerabilities as referenced in the ALAS2-2022-1792 advisory.\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/AL2/ALAS-2022-1792.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-22576.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27774.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27775.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27776.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Run 'yum update curl' to update your system.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/05/04\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/05/05\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:amazon:linux:2\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Amazon Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AmazonLinux/release\", \"Host/AmazonLinux/rpm-list\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/AmazonLinux/release\");\nif (isnull(release) || !strlen(release)) audit(AUDIT_OS_NOT, \"Amazon Linux\");\nvar os_ver = pregmatch(pattern: \"^AL(A|\\d)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Amazon Linux\");\nvar os_ver = os_ver[1];\nif (os_ver != \"2\")\n{\n if (os_ver == 'A') os_ver = 'AMI';\n audit(AUDIT_OS_NOT, \"Amazon Linux 2\", \"Amazon Linux \" + os_ver);\n}\n\nif (!get_kb_item(\"Host/AmazonLinux/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar pkgs = [\n {'reference':'curl-7.79.1-2.amzn2.0.1', 'cpu':'aarch64', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.79.1-2.amzn2.0.1', 'cpu':'i686', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.79.1-2.amzn2.0.1', 'cpu':'x86_64', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.79.1-2.amzn2.0.1', 'cpu':'aarch64', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.79.1-2.amzn2.0.1', 'cpu':'i686', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.79.1-2.amzn2.0.1', 'cpu':'x86_64', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.79.1-2.amzn2.0.1', 'cpu':'aarch64', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.79.1-2.amzn2.0.1', 'cpu':'i686', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.79.1-2.amzn2.0.1', 'cpu':'x86_64', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.79.1-2.amzn2.0.1', 'cpu':'aarch64', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.79.1-2.amzn2.0.1', 'cpu':'i686', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.79.1-2.amzn2.0.1', 'cpu':'x86_64', 'release':'AL2', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var allowmaj = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = package_array['release'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (reference && release) {\n if (rpm_check(release:release, cpu:cpu, reference:reference, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl / curl-debuginfo / libcurl / etc\");\n}", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:25:27", "description": "According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-07-08T00:00:00", "type": "nessus", "title": "EulerOS 2.0 SP9 : curl (EulerOS-SA-2022-1991)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:curl", "p-cpe:/a:huawei:euleros:libcurl", "cpe:/o:huawei:euleros:2.0"], "id": "EULEROS_SA-2022-1991.NASL", "href": "https://www.tenable.com/plugins/nessus/162884", "sourceData": "##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(162884);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"EulerOS 2.0 SP9 : curl (EulerOS-SA-2022-1991)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the\nfollowing vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security\nadvisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional\nissues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2022-1991\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?cff3df23\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/08\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/08\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:2.0\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/sp\");\n script_exclude_keys(\"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nvar uvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (release !~ \"^EulerOS release 2\\.0(\\D|$)\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP9\");\n\nvar sp = get_kb_item(\"Host/EulerOS/sp\");\nif (isnull(sp) || sp !~ \"^(9)$\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP9\");\n\nif (!empty_or_null(uvp)) audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP9\", \"EulerOS UVP \" + uvp);\n\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_ARCH_NOT, \"i686 / x86_64\", cpu);\n\nvar flag = 0;\n\nvar pkgs = [\n \"curl-7.69.1-2.h12.eulerosv2r9\",\n \"libcurl-7.69.1-2.h12.eulerosv2r9\"\n];\n\nforeach (var pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", sp:\"9\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl\");\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:24:56", "description": "According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-07-08T00:00:00", "type": "nessus", "title": "EulerOS 2.0 SP9 : curl (EulerOS-SA-2022-1961)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:curl", "p-cpe:/a:huawei:euleros:libcurl", "cpe:/o:huawei:euleros:2.0"], "id": "EULEROS_SA-2022-1961.NASL", "href": "https://www.tenable.com/plugins/nessus/162888", "sourceData": "##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(162888);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"EulerOS 2.0 SP9 : curl (EulerOS-SA-2022-1961)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the\nfollowing vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security\nadvisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional\nissues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2022-1961\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?4020714a\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/08\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/08\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:2.0\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/sp\");\n script_exclude_keys(\"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nvar uvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (release !~ \"^EulerOS release 2\\.0(\\D|$)\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP9\");\n\nvar sp = get_kb_item(\"Host/EulerOS/sp\");\nif (isnull(sp) || sp !~ \"^(9)$\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP9\");\n\nif (!empty_or_null(uvp)) audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP9\", \"EulerOS UVP \" + uvp);\n\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"aarch64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"aarch64\", cpu);\n\nvar flag = 0;\n\nvar pkgs = [\n \"curl-7.69.1-2.h12.eulerosv2r9\",\n \"libcurl-7.69.1-2.h12.eulerosv2r9\"\n];\n\nforeach (var pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", sp:\"9\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl\");\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:29:45", "description": "It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2022-2022-055 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-09-06T00:00:00", "type": "nessus", "title": "Amazon Linux 2022 : (ALAS2022-2022-055)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:amazon:linux:curl", "p-cpe:/a:amazon:linux:curl-debuginfo", "p-cpe:/a:amazon:linux:curl-debugsource", "p-cpe:/a:amazon:linux:curl-minimal", "p-cpe:/a:amazon:linux:curl-minimal-debuginfo", "p-cpe:/a:amazon:linux:libcurl", "p-cpe:/a:amazon:linux:libcurl-debuginfo", "p-cpe:/a:amazon:linux:libcurl-devel", "p-cpe:/a:amazon:linux:libcurl-minimal", "p-cpe:/a:amazon:linux:libcurl-minimal-debuginfo", "cpe:/o:amazon:linux:2022"], "id": "AL2022_ALAS2022-2022-055.NASL", "href": "https://www.tenable.com/plugins/nessus/164739", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Amazon Linux 2022 Security Advisory ALAS2022-2022-055.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(164739);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Amazon Linux 2022 : (ALAS2022-2022-055)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Amazon Linux 2022 host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2022-2022-055 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/AL2022/ALAS-2022-055.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-22576.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27774.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27775.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27776.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Run 'dnf update --releasever=2022.0.20220504 curl' to update your system.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/05/04\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/09/06\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-minimal-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-minimal-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:amazon:linux:2022\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Amazon Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AmazonLinux/release\", \"Host/AmazonLinux/rpm-list\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/AmazonLinux/release\");\nif (isnull(release) || !strlen(release)) audit(AUDIT_OS_NOT, \"Amazon Linux\");\nvar os_ver = pregmatch(pattern: \"^AL(A|\\d+|-\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Amazon Linux\");\nvar os_ver = os_ver[1];\nif (os_ver != \"-2022\")\n{\n if (os_ver == 'A') os_ver = 'AMI';\n audit(AUDIT_OS_NOT, \"Amazon Linux 2022\", \"Amazon Linux \" + os_ver);\n}\n\nif (!get_kb_item(\"Host/AmazonLinux/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar pkgs = [\n {'reference':'curl-7.79.1-2.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.79.1-2.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.79.1-2.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.79.1-2.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.79.1-2.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.79.1-2.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.79.1-2.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.79.1-2.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.79.1-2.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.79.1-2.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.79.1-2.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.79.1-2.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.79.1-2.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.79.1-2.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.79.1-2.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.79.1-2.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.79.1-2.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.79.1-2.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.79.1-2.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.79.1-2.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.79.1-2.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.79.1-2.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.79.1-2.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.79.1-2.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.79.1-2.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.79.1-2.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.79.1-2.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.79.1-2.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.79.1-2.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.79.1-2.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var sp = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && release && (!exists_check || rpm_exists(release:release, rpm:exists_check))) {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl / curl-debuginfo / curl-debugsource / etc\");\n}", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:32:02", "description": "According to the versions of the curl packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-09-24T00:00:00", "type": "nessus", "title": "EulerOS Virtualization 2.9.0 : curl (EulerOS-SA-2022-2377)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:curl", "p-cpe:/a:huawei:euleros:libcurl", "cpe:/o:huawei:euleros:uvp:2.9.0"], "id": "EULEROS_SA-2022-2377.NASL", "href": "https://www.tenable.com/plugins/nessus/165404", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(165404);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"EulerOS Virtualization 2.9.0 : curl (EulerOS-SA-2022-2377)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS Virtualization host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the curl packages installed, the EulerOS Virtualization installation on the remote host is\naffected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security\nadvisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional\nissues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2022-2377\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?7a658cd9\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/09/23\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/09/24\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:uvp:2.9.0\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nvar uvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (uvp != \"2.9.0\") audit(AUDIT_OS_NOT, \"EulerOS Virtualization 2.9.0\");\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_ARCH_NOT, \"i686 / x86_64\", cpu);\n\nvar flag = 0;\n\nvar pkgs = [\n \"curl-7.69.1-2.h15.eulerosv2r9\",\n \"libcurl-7.69.1-2.h15.eulerosv2r9\"\n];\n\nforeach (var pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl\");\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:20:15", "description": "The version of FreeBSD installed on the remote host is prior to tested version. It is, therefore, affected by multiple vulnerabilities as referenced in the 92a4d881-c6cf-11ec-a06f-d4c9ef517024 advisory.\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-04-28T00:00:00", "type": "nessus", "title": "FreeBSD : cURL -- Multiple vulnerabilities (92a4d881-c6cf-11ec-a06f-d4c9ef517024)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:freebsd:freebsd:curl", "cpe:/o:freebsd:freebsd"], "id": "FREEBSD_PKG_92A4D881C6CF11ECA06FD4C9EF517024.NASL", "href": "https://www.tenable.com/plugins/nessus/160296", "sourceData": "#%NASL_MIN_LEVEL 70300\n#\n# (C) Tenable, Inc.\n#\n# @NOAGENT@\n#\n# The descriptive text and package checks in this plugin were\n# extracted from the FreeBSD VuXML database :\n#\n# Copyright 2003-2021 Jacques Vidrine and contributors\n#\n# Redistribution and use in source (VuXML) and 'compiled' forms (SGML,\n# HTML, PDF, PostScript, RTF and so forth) with or without modification,\n# are permitted provided that the following conditions are met:\n# 1. Redistributions of source code (VuXML) must retain the above\n# copyright notice, this list of conditions and the following\n# disclaimer as the first lines of this file unmodified.\n# 2. Redistributions in compiled form (transformed to other DTDs,\n# published online in any format, converted to PDF, PostScript,\n# RTF and other formats) must reproduce the above copyright\n# notice, this list of conditions and the following disclaimer\n# in the documentation and/or other materials provided with the\n# distribution.\n#\n# THIS DOCUMENTATION IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS \"AS IS\"\n# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,\n# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR\n# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS\n# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,\n# OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT\n# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR\n# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,\n# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE\n# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS DOCUMENTATION,\n# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n#\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(160296);\n script_version(\"1.6\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"FreeBSD : cURL -- Multiple vulnerabilities (92a4d881-c6cf-11ec-a06f-d4c9ef517024)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote FreeBSD host is missing one or more security-related updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The version of FreeBSD installed on the remote host is prior to tested version. It is, therefore, affected by multiple\nvulnerabilities as referenced in the 92a4d881-c6cf-11ec-a06f-d4c9ef517024 advisory.\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://curl.se/docs/vuln-7.82.0.html\");\n # https://vuxml.freebsd.org/freebsd/92a4d881-c6cf-11ec-a06f-d4c9ef517024.html\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?f663f7e9\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/04/28\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:freebsd:freebsd:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:freebsd:freebsd\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"FreeBSD Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/FreeBSD/release\", \"Host/FreeBSD/pkg_info\");\n\n exit(0);\n}\n\n\ninclude(\"freebsd_package.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/FreeBSD/release\")) audit(AUDIT_OS_NOT, \"FreeBSD\");\nif (!get_kb_item(\"Host/FreeBSD/pkg_info\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\nvar flag = 0;\n\nvar packages = [\n 'curl<7.83.0'\n];\n\nforeach var package( packages ) {\n if (pkg_test(save_report:TRUE, pkg: package)) flag++;\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : pkg_report_get()\n );\n exit(0);\n}\nelse audit(AUDIT_HOST_NOT, \"affected\");\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:21:40", "description": "The version of curl installed on the remote host is prior to 7.83.0. It is, therefore, affected by multiple vulnerabilities as referenced in the SSA:2022-117-01 advisory.\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-04-27T00:00:00", "type": "nessus", "title": "Slackware Linux 14.0 / 14.1 / 14.2 / 15.0 / current curl Multiple Vulnerabilities (SSA:2022-117-01)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:slackware:slackware_linux:curl", "cpe:/o:slackware:slackware_linux", "cpe:/o:slackware:slackware_linux:14.0", "cpe:/o:slackware:slackware_linux:14.1", "cpe:/o:slackware:slackware_linux:14.2", "cpe:/o:slackware:slackware_linux:15.0"], "id": "SLACKWARE_SSA_2022-117-01.NASL", "href": "https://www.tenable.com/plugins/nessus/160273", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable, Inc.\n##\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Slackware Security Advisory SSA:2022-117-01. The text\n# itself is copyright (C) Slackware Linux, Inc.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(160273);\n script_version(\"1.6\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Slackware Linux 14.0 / 14.1 / 14.2 / 15.0 / current curl Multiple Vulnerabilities (SSA:2022-117-01)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Slackware Linux host is missing a security update to curl.\");\n script_set_attribute(attribute:\"description\", value:\n\"The version of curl installed on the remote host is prior to 7.83.0. It is, therefore, affected by multiple\nvulnerabilities as referenced in the SSA:2022-117-01 advisory.\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the affected curl package.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/04/27\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:slackware:slackware_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:slackware:slackware_linux\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:slackware:slackware_linux:14.0\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:slackware:slackware_linux:14.1\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:slackware:slackware_linux:14.2\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:slackware:slackware_linux:15.0\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Slackware Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Slackware/release\", \"Host/Slackware/packages\");\n\n exit(0);\n}\n\ninclude(\"slackware.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/Slackware/release\")) audit(AUDIT_OS_NOT, \"Slackware\");\nif (!get_kb_item(\"Host/Slackware/packages\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"Slackware\", cpu);\n\nvar flag = 0;\nvar constraints = [\n { 'fixed_version' : '7.83.0', 'product' : 'curl', 'os_name' : 'Slackware Linux', 'os_version' : '14.0', 'service_pack' : '1_slack14.0', 'arch' : 'i486' },\n { 'fixed_version' : '7.83.0', 'product' : 'curl', 'os_name' : 'Slackware Linux', 'os_version' : '14.0', 'service_pack' : '1_slack14.0', 'arch' : 'x86_64' },\n { 'fixed_version' : '7.83.0', 'product' : 'curl', 'os_name' : 'Slackware Linux', 'os_version' : '14.1', 'service_pack' : '1_slack14.1', 'arch' : 'i486' },\n { 'fixed_version' : '7.83.0', 'product' : 'curl', 'os_name' : 'Slackware Linux', 'os_version' : '14.1', 'service_pack' : '1_slack14.1', 'arch' : 'x86_64' },\n { 'fixed_version' : '7.83.0', 'product' : 'curl', 'os_name' : 'Slackware Linux', 'os_version' : '14.2', 'service_pack' : '1_slack14.2', 'arch' : 'i586' },\n { 'fixed_version' : '7.83.0', 'product' : 'curl', 'os_name' : 'Slackware Linux', 'os_version' : '14.2', 'service_pack' : '1_slack14.2', 'arch' : 'x86_64' },\n { 'fixed_version' : '7.83.0', 'product' : 'curl', 'os_name' : 'Slackware Linux', 'os_version' : '15.0', 'service_pack' : '1_slack15.0', 'arch' : 'i586' },\n { 'fixed_version' : '7.83.0', 'product' : 'curl', 'os_name' : 'Slackware Linux', 'os_version' : '15.0', 'service_pack' : '1_slack15.0', 'arch' : 'x86_64' },\n { 'fixed_version' : '7.83.0', 'product' : 'curl', 'os_name' : 'Slackware Linux', 'os_version' : 'current', 'service_pack' : '1', 'arch' : 'i586' },\n { 'fixed_version' : '7.83.0', 'product' : 'curl', 'os_name' : 'Slackware Linux', 'os_version' : 'current', 'service_pack' : '1', 'arch' : 'x86_64' }\n];\n\nforeach constraint (constraints) {\n var pkg_arch = constraint['arch'];\n var arch = NULL;\n if (pkg_arch == \"x86_64\") {\n arch = pkg_arch;\n }\n if (slackware_check(osver:constraint['os_version'],\n arch:arch,\n pkgname:constraint['product'],\n pkgver:constraint['fixed_version'],\n pkgarch:pkg_arch,\n pkgnum:constraint['service_pack'])) flag++;\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : slackware_report_get()\n );\n exit(0);\n}\nelse audit(AUDIT_HOST_NOT, \"affected\");\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:26:44", "description": "According to the versions of the curl packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-07-15T00:00:00", "type": "nessus", "title": "EulerOS Virtualization 2.10.1 : curl (EulerOS-SA-2022-2107)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:curl", "p-cpe:/a:huawei:euleros:curl-help", "p-cpe:/a:huawei:euleros:libcurl", "p-cpe:/a:huawei:euleros:libcurl-devel", "cpe:/o:huawei:euleros:uvp:2.10.1"], "id": "EULEROS_SA-2022-2107.NASL", "href": "https://www.tenable.com/plugins/nessus/163207", "sourceData": "##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(163207);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"EulerOS Virtualization 2.10.1 : curl (EulerOS-SA-2022-2107)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS Virtualization host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the curl packages installed, the EulerOS Virtualization installation on the remote host is\naffected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security\nadvisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional\nissues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2022-2107\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?eb23d8ce\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/15\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl-help\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:uvp:2.10.1\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nvar uvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (uvp != \"2.10.1\") audit(AUDIT_OS_NOT, \"EulerOS Virtualization 2.10.1\");\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"aarch64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"aarch64\", cpu);\n\nvar flag = 0;\n\nvar pkgs = [\n \"curl-7.71.1-4.h13.eulerosv2r10\",\n \"curl-help-7.71.1-4.h13.eulerosv2r10\",\n \"libcurl-7.71.1-4.h13.eulerosv2r10\",\n \"libcurl-devel-7.71.1-4.h13.eulerosv2r10\"\n];\n\nforeach (var pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl\");\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:26:42", "description": "According to the versions of the curl packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-07-15T00:00:00", "type": "nessus", "title": "EulerOS Virtualization 2.10.0 : curl (EulerOS-SA-2022-2087)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:curl", "p-cpe:/a:huawei:euleros:curl-help", "p-cpe:/a:huawei:euleros:libcurl", "p-cpe:/a:huawei:euleros:libcurl-devel", "cpe:/o:huawei:euleros:uvp:2.10.0"], "id": "EULEROS_SA-2022-2087.NASL", "href": "https://www.tenable.com/plugins/nessus/163209", "sourceData": "##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(163209);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"EulerOS Virtualization 2.10.0 : curl (EulerOS-SA-2022-2087)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS Virtualization host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the curl packages installed, the EulerOS Virtualization installation on the remote host is\naffected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security\nadvisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional\nissues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2022-2087\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?0cfdecb2\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/14\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/15\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl-help\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:uvp:2.10.0\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nvar uvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (uvp != \"2.10.0\") audit(AUDIT_OS_NOT, \"EulerOS Virtualization 2.10.0\");\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_ARCH_NOT, \"i686 / x86_64\", cpu);\n\nvar flag = 0;\n\nvar pkgs = [\n \"curl-7.71.1-4.h13.eulerosv2r10\",\n \"curl-help-7.71.1-4.h13.eulerosv2r10\",\n \"libcurl-7.71.1-4.h13.eulerosv2r10\",\n \"libcurl-devel-7.71.1-4.h13.eulerosv2r10\"\n];\n\nforeach (var pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl\");\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:25:52", "description": "According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-07-29T00:00:00", "type": "nessus", "title": "EulerOS 2.0 SP10 : curl (EulerOS-SA-2022-2128)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:curl", "p-cpe:/a:huawei:euleros:libcurl", "cpe:/o:huawei:euleros:2.0"], "id": "EULEROS_SA-2022-2128.NASL", "href": "https://www.tenable.com/plugins/nessus/163532", "sourceData": "##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(163532);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"EulerOS 2.0 SP10 : curl (EulerOS-SA-2022-2128)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the\nfollowing vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security\nadvisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional\nissues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2022-2128\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?6408a88f\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/29\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/29\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:2.0\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/sp\");\n script_exclude_keys(\"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nvar uvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (release !~ \"^EulerOS release 2\\.0(\\D|$)\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP10\");\n\nvar sp = get_kb_item(\"Host/EulerOS/sp\");\nif (isnull(sp) || sp !~ \"^(10)$\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP10\");\n\nif (!empty_or_null(uvp)) audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP10\", \"EulerOS UVP \" + uvp);\n\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\") audit(AUDIT_ARCH_NOT, \"i686 / x86_64\", cpu);\n\nvar flag = 0;\n\nvar pkgs = [\n \"curl-7.71.1-4.h13.eulerosv2r10\",\n \"libcurl-7.71.1-4.h13.eulerosv2r10\"\n];\n\nforeach (var pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", sp:\"10\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl\");\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:26:42", "description": "According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-07-29T00:00:00", "type": "nessus", "title": "EulerOS 2.0 SP10 : curl (EulerOS-SA-2022-2153)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:curl", "p-cpe:/a:huawei:euleros:libcurl", "cpe:/o:huawei:euleros:2.0"], "id": "EULEROS_SA-2022-2153.NASL", "href": "https://www.tenable.com/plugins/nessus/163533", "sourceData": "##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(163533);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"EulerOS 2.0 SP10 : curl (EulerOS-SA-2022-2153)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the\nfollowing vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security\nadvisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional\nissues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2022-2153\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?ca8fa648\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/29\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/29\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:2.0\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/sp\");\n script_exclude_keys(\"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nvar uvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (release !~ \"^EulerOS release 2\\.0(\\D|$)\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP10\");\n\nvar sp = get_kb_item(\"Host/EulerOS/sp\");\nif (isnull(sp) || sp !~ \"^(10)$\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP10\");\n\nif (!empty_or_null(uvp)) audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP10\", \"EulerOS UVP \" + uvp);\n\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"aarch64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"aarch64\", cpu);\n\nvar flag = 0;\n\nvar pkgs = [\n \"curl-7.71.1-4.h13.eulerosv2r10\",\n \"libcurl-7.71.1-4.h13.eulerosv2r10\"\n];\n\nforeach (var pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", sp:\"10\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl\");\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-18T18:39:19", "description": "The remote Ubuntu 18.04 LTS / 20.04 LTS / 21.10 / 22.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-5397-1 advisory.\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-04-28T00:00:00", "type": "nessus", "title": "Ubuntu 18.04 LTS / 20.04 LTS / 21.10 / 22.04 LTS : curl vulnerabilities (USN-5397-1)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2023-01-17T00:00:00", "cpe": ["cpe:/o:canonical:ubuntu_linux:18.04:-:lts", "cpe:/o:canonical:ubuntu_linux:20.04:-:lts", "cpe:/o:canonical:ubuntu_linux:21.10", "cpe:/o:canonical:ubuntu_linux:22.04:-:lts", "p-cpe:/a:canonical:ubuntu_linux:curl", "p-cpe:/a:canonical:ubuntu_linux:libcurl3-gnutls", "p-cpe:/a:canonical:ubuntu_linux:libcurl3-nss", "p-cpe:/a:canonical:ubuntu_linux:libcurl4", "p-cpe:/a:canonical:ubuntu_linux:libcurl4-gnutls-dev", "p-cpe:/a:canonical:ubuntu_linux:libcurl4-nss-dev", "p-cpe:/a:canonical:ubuntu_linux:libcurl4-openssl-dev"], "id": "UBUNTU_USN-5397-1.NASL", "href": "https://www.tenable.com/plugins/nessus/160318", "sourceData": "#%NASL_MIN_LEVEL 70300\n##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Ubuntu Security Notice USN-5397-1. The text\n# itself is copyright (C) Canonical, Inc. See\n# <https://ubuntu.com/security/notices>. Ubuntu(R) is a registered\n# trademark of Canonical, Inc.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(160318);\n script_version(\"1.7\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/01/17\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"USN\", value:\"5397-1\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Ubuntu 18.04 LTS / 20.04 LTS / 21.10 / 22.04 LTS : curl vulnerabilities (USN-5397-1)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Ubuntu host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Ubuntu 18.04 LTS / 20.04 LTS / 21.10 / 22.04 LTS host has packages installed that are affected by multiple\nvulnerabilities as referenced in the USN-5397-1 advisory.\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://ubuntu.com/security/notices/USN-5397-1\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/04/28\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:18.04:-:lts\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:20.04:-:lts\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:21.10\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:canonical:ubuntu_linux:22.04:-:lts\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libcurl3-gnutls\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libcurl3-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libcurl4\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libcurl4-gnutls-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libcurl4-nss-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:canonical:ubuntu_linux:libcurl4-openssl-dev\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Ubuntu Local Security Checks\");\n\n script_copyright(english:\"Ubuntu Security Notice (C) 2022-2023 Canonical, Inc. / NASL script (C) 2022-2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/cpu\", \"Host/Ubuntu\", \"Host/Ubuntu/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\ninclude('debian_package.inc');\n\nif ( ! get_kb_item('Host/local_checks_enabled') ) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nvar release = get_kb_item('Host/Ubuntu/release');\nif ( isnull(release) ) audit(AUDIT_OS_NOT, 'Ubuntu');\nvar release = chomp(release);\nif (! preg(pattern:\"^(18\\.04|20\\.04|21\\.10|22\\.04)$\", string:release)) audit(AUDIT_OS_NOT, 'Ubuntu 18.04 / 20.04 / 21.10 / 22.04', 'Ubuntu ' + release);\nif ( ! get_kb_item('Host/Debian/dpkg-l') ) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Ubuntu', cpu);\n\n\nvar pkgs = [\n {'osver': '18.04', 'pkgname': 'curl', 'pkgver': '7.58.0-2ubuntu3.17'},\n {'osver': '18.04', 'pkgname': 'libcurl3-gnutls', 'pkgver': '7.58.0-2ubuntu3.17'},\n {'osver': '18.04', 'pkgname': 'libcurl3-nss', 'pkgver': '7.58.0-2ubuntu3.17'},\n {'osver': '18.04', 'pkgname': 'libcurl4', 'pkgver': '7.58.0-2ubuntu3.17'},\n {'osver': '18.04', 'pkgname': 'libcurl4-gnutls-dev', 'pkgver': '7.58.0-2ubuntu3.17'},\n {'osver': '18.04', 'pkgname': 'libcurl4-nss-dev', 'pkgver': '7.58.0-2ubuntu3.17'},\n {'osver': '18.04', 'pkgname': 'libcurl4-openssl-dev', 'pkgver': '7.58.0-2ubuntu3.17'},\n {'osver': '20.04', 'pkgname': 'curl', 'pkgver': '7.68.0-1ubuntu2.10'},\n {'osver': '20.04', 'pkgname': 'libcurl3-gnutls', 'pkgver': '7.68.0-1ubuntu2.10'},\n {'osver': '20.04', 'pkgname': 'libcurl3-nss', 'pkgver': '7.68.0-1ubuntu2.10'},\n {'osver': '20.04', 'pkgname': 'libcurl4', 'pkgver': '7.68.0-1ubuntu2.10'},\n {'osver': '20.04', 'pkgname': 'libcurl4-gnutls-dev', 'pkgver': '7.68.0-1ubuntu2.10'},\n {'osver': '20.04', 'pkgname': 'libcurl4-nss-dev', 'pkgver': '7.68.0-1ubuntu2.10'},\n {'osver': '20.04', 'pkgname': 'libcurl4-openssl-dev', 'pkgver': '7.68.0-1ubuntu2.10'},\n {'osver': '21.10', 'pkgname': 'curl', 'pkgver': '7.74.0-1.3ubuntu2.1'},\n {'osver': '21.10', 'pkgname': 'libcurl3-gnutls', 'pkgver': '7.74.0-1.3ubuntu2.1'},\n {'osver': '21.10', 'pkgname': 'libcurl3-nss', 'pkgver': '7.74.0-1.3ubuntu2.1'},\n {'osver': '21.10', 'pkgname': 'libcurl4', 'pkgver': '7.74.0-1.3ubuntu2.1'},\n {'osver': '21.10', 'pkgname': 'libcurl4-gnutls-dev', 'pkgver': '7.74.0-1.3ubuntu2.1'},\n {'osver': '21.10', 'pkgname': 'libcurl4-nss-dev', 'pkgver': '7.74.0-1.3ubuntu2.1'},\n {'osver': '21.10', 'pkgname': 'libcurl4-openssl-dev', 'pkgver': '7.74.0-1.3ubuntu2.1'},\n {'osver': '22.04', 'pkgname': 'curl', 'pkgver': '7.81.0-1ubuntu1.1'},\n {'osver': '22.04', 'pkgname': 'libcurl3-gnutls', 'pkgver': '7.81.0-1ubuntu1.1'},\n {'osver': '22.04', 'pkgname': 'libcurl3-nss', 'pkgver': '7.81.0-1ubuntu1.1'},\n {'osver': '22.04', 'pkgname': 'libcurl4', 'pkgver': '7.81.0-1ubuntu1.1'},\n {'osver': '22.04', 'pkgname': 'libcurl4-gnutls-dev', 'pkgver': '7.81.0-1ubuntu1.1'},\n {'osver': '22.04', 'pkgname': 'libcurl4-nss-dev', 'pkgver': '7.81.0-1ubuntu1.1'},\n {'osver': '22.04', 'pkgname': 'libcurl4-openssl-dev', 'pkgver': '7.81.0-1ubuntu1.1'}\n];\n\nvar flag = 0;\nforeach package_array ( pkgs ) {\n var osver = NULL;\n var pkgname = NULL;\n var pkgver = NULL;\n if (!empty_or_null(package_array['osver'])) osver = package_array['osver'];\n if (!empty_or_null(package_array['pkgname'])) pkgname = package_array['pkgname'];\n if (!empty_or_null(package_array['pkgver'])) pkgver = package_array['pkgver'];\n if (osver && pkgname && pkgver) {\n if (ubuntu_check(osver:osver, pkgname:pkgname, pkgver:pkgver)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : ubuntu_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = ubuntu_pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / libcurl3-gnutls / libcurl3-nss / libcurl4 / libcurl4-gnutls-dev / etc');\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-02-09T06:32:55", "description": "The remote SUSE Linux SLED15 / SLES15 / openSUSE 15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2022:1657-1 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-05-14T00:00:00", "type": "nessus", "title": "SUSE SLED15 / SLES15 / openSUSE 15 Security Update : curl (SUSE-SU-2022:1657-1)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2023-02-08T00:00:00", "cpe": ["p-cpe:/a:novell:suse_linux:curl", "p-cpe:/a:novell:suse_linux:libcurl-devel", "p-cpe:/a:novell:suse_linux:libcurl4", "p-cpe:/a:novell:suse_linux:libcurl4-32bit", "cpe:/o:novell:suse_linux:15"], "id": "SUSE_SU-2022-1657-1.NASL", "href": "https://www.tenable.com/plugins/nessus/161204", "sourceData": "##\n# (C) Tenable, Inc.\n#\n# The package checks in this plugin were extracted from\n# SUSE update advisory SUSE-SU-2022:1657-1. The text itself\n# is copyright (C) SUSE.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(161204);\n script_version(\"1.6\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/02/08\");\n\n script_cve_id(\"CVE-2022-22576\", \"CVE-2022-27775\", \"CVE-2022-27776\");\n script_xref(name:\"SuSE\", value:\"SUSE-SU-2022:1657-1\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"SUSE SLED15 / SLES15 / openSUSE 15 Security Update : curl (SUSE-SU-2022:1657-1)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote SUSE Linux SLED15 / SLES15 / openSUSE 15 host has packages installed that are affected by multiple\nvulnerabilities as referenced in the SUSE-SU-2022:1657-1 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1198614\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1198723\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1198766\");\n # https://lists.suse.com/pipermail/sle-security-updates/2022-May/010999.html\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?c1404e06\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2022-22576\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2022-27775\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2022-27776\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/05/13\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/05/14\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libcurl4\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libcurl4-32bit\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:15\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022-2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nvar os_release = get_kb_item(\"Host/SuSE/release\");\nif (isnull(os_release) || os_release !~ \"^(SLED|SLES|SUSE)\") audit(AUDIT_OS_NOT, \"SUSE / openSUSE\");\nvar os_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+|SUSE([\\d.]+))\", string:os_release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'SUSE / openSUSE');\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLED15|SLES15|SUSE15\\.3)$\", string:os_ver)) audit(AUDIT_OS_NOT, 'SUSE SLED15 / SLES15 / openSUSE 15', 'SUSE / openSUSE (' + os_ver + ')');\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'SUSE / openSUSE (' + os_ver + ')', cpu);\n\nvar service_pack = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(service_pack)) service_pack = \"0\";\nif (os_ver == \"SLED15\" && (! preg(pattern:\"^(3)$\", string:service_pack))) audit(AUDIT_OS_NOT, \"SLED15 SP3\", os_ver + \" SP\" + service_pack);\nif (os_ver == \"SLES15\" && (! preg(pattern:\"^(3)$\", string:service_pack))) audit(AUDIT_OS_NOT, \"SLES15 SP3\", os_ver + \" SP\" + service_pack);\n\nvar pkgs = [\n {'reference':'curl-7.66.0-150200.4.30.1', 'sp':'3', 'release':'SLED15', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-15.3', 'SLE_HPC-release-15.3', 'sle-module-basesystem-release-15.3', 'sled-release-15.3', 'sles-release-15.3']},\n {'reference':'curl-7.66.0-150200.4.30.1', 'sp':'3', 'release':'SLES15', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-15.3', 'SLE_HPC-release-15.3', 'sle-module-basesystem-release-15.3', 'sled-release-15.3', 'sles-release-15.3']},\n {'reference':'libcurl-devel-7.66.0-150200.4.30.1', 'sp':'3', 'release':'SLED15', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-15.3', 'SLE_HPC-release-15.3', 'sle-module-basesystem-release-15.3', 'sled-release-15.3', 'sles-release-15.3']},\n {'reference':'libcurl-devel-7.66.0-150200.4.30.1', 'sp':'3', 'release':'SLES15', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-15.3', 'SLE_HPC-release-15.3', 'sle-module-basesystem-release-15.3', 'sled-release-15.3', 'sles-release-15.3']},\n {'reference':'libcurl4-32bit-7.66.0-150200.4.30.1', 'sp':'3', 'cpu':'x86_64', 'release':'SLED15', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-15.3', 'SLE_HPC-release-15.3', 'sle-module-basesystem-release-15.3', 'sled-release-15.3', 'sles-release-15.3']},\n {'reference':'libcurl4-32bit-7.66.0-150200.4.30.1', 'sp':'3', 'cpu':'x86_64', 'release':'SLES15', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-15.3', 'SLE_HPC-release-15.3', 'sle-module-basesystem-release-15.3', 'sled-release-15.3', 'sles-release-15.3']},\n {'reference':'libcurl4-7.66.0-150200.4.30.1', 'sp':'3', 'release':'SLED15', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-15.3', 'SLE_HPC-release-15.3', 'sle-module-basesystem-release-15.3', 'sled-release-15.3', 'sles-release-15.3']},\n {'reference':'libcurl4-7.66.0-150200.4.30.1', 'sp':'3', 'release':'SLES15', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-15.3', 'SLE_HPC-release-15.3', 'sle-module-basesystem-release-15.3', 'sled-release-15.3', 'sles-release-15.3']},\n {'reference':'curl-7.66.0-150200.4.30.1', 'release':'SUSE15.3', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['openSUSE-release-15.3']},\n {'reference':'libcurl-devel-32bit-7.66.0-150200.4.30.1', 'cpu':'x86_64', 'release':'SUSE15.3', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['openSUSE-release-15.3']},\n {'reference':'libcurl-devel-7.66.0-150200.4.30.1', 'release':'SUSE15.3', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['openSUSE-release-15.3']},\n {'reference':'libcurl4-32bit-7.66.0-150200.4.30.1', 'cpu':'x86_64', 'release':'SUSE15.3', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['openSUSE-release-15.3']},\n {'reference':'libcurl4-7.66.0-150200.4.30.1', 'release':'SUSE15.3', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['openSUSE-release-15.3']}\n];\n\nvar ltss_caveat_required = FALSE;\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var _release = NULL;\n var sp = NULL;\n var _cpu = NULL;\n var exists_check = NULL;\n var rpm_spec_vers_cmp = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) _release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) _cpu = package_array['cpu'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (reference && _release) {\n if (exists_check) {\n var check_flag = 0;\n foreach var check (exists_check) {\n if (!rpm_exists(release:_release, rpm:check)) continue;\n check_flag++;\n }\n if (!check_flag) continue;\n }\n if (rpm_check(release:_release, sp:sp, cpu:_cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / libcurl-devel / libcurl-devel-32bit / libcurl4 / libcurl4-32bit');\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:24:25", "description": "The remote Oracle Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2022-5245 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-07-07T00:00:00", "type": "nessus", "title": "Oracle Linux 9 : curl (ELSA-2022-5245)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27782"], "modified": "2022-12-05T00:00:00", "cpe": ["cpe:/o:oracle:linux:9", "p-cpe:/a:oracle:linux:curl", "p-cpe:/a:oracle:linux:curl-minimal", "p-cpe:/a:oracle:linux:libcurl", "p-cpe:/a:oracle:linux:libcurl-devel", "p-cpe:/a:oracle:linux:libcurl-minimal"], "id": "ORACLELINUX_ELSA-2022-5245.NASL", "href": "https://www.tenable.com/plugins/nessus/162805", "sourceData": "##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Oracle Linux Security Advisory ELSA-2022-5245.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(162805);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27776\",\n \"CVE-2022-27782\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Oracle Linux 9 : curl (ELSA-2022-5245)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Oracle Linux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Oracle Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nELSA-2022-5245 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://linux.oracle.com/errata/ELSA-2022-5245.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/06/30\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/07\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:9\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:curl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libcurl-minimal\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/local_checks_enabled\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item('Host/OracleLinux')) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar release = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar os_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Oracle Linux');\nvar os_ver = os_ver[1];\nif (! preg(pattern:\"^9([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'Oracle Linux 9', 'Oracle Linux ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Oracle Linux', cpu);\n\nvar pkgs = [\n {'reference':'curl-7.76.1-14.el9_0.4', 'cpu':'aarch64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.76.1-14.el9_0.4', 'cpu':'x86_64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.76.1-14.el9_0.4', 'cpu':'aarch64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.76.1-14.el9_0.4', 'cpu':'x86_64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.76.1-14.el9_0.4', 'cpu':'aarch64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.76.1-14.el9_0.4', 'cpu':'i686', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.76.1-14.el9_0.4', 'cpu':'x86_64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.76.1-14.el9_0.4', 'cpu':'aarch64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.76.1-14.el9_0.4', 'cpu':'i686', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.76.1-14.el9_0.4', 'cpu':'x86_64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.76.1-14.el9_0.4', 'cpu':'aarch64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.76.1-14.el9_0.4', 'cpu':'i686', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.76.1-14.el9_0.4', 'cpu':'x86_64', 'release':'9', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var sp = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = 'EL' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && release) {\n if (exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n } else {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / curl-minimal / libcurl / etc');\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:25:12", "description": "The remote Rocky Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the RLSA-2022:5313 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-07-08T00:00:00", "type": "nessus", "title": "Rocky Linux 8 : curl (RLSA-2022:5313)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27782"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:rocky:linux:curl", "p-cpe:/a:rocky:linux:curl-debuginfo", "p-cpe:/a:rocky:linux:curl-debugsource", "p-cpe:/a:rocky:linux:libcurl", "p-cpe:/a:rocky:linux:libcurl-debuginfo", "p-cpe:/a:rocky:linux:libcurl-devel", "p-cpe:/a:rocky:linux:libcurl-minimal", "p-cpe:/a:rocky:linux:libcurl-minimal-debuginfo", "cpe:/o:rocky:linux:8"], "id": "ROCKY_LINUX_RLSA-2022-5313.NASL", "href": "https://www.tenable.com/plugins/nessus/162849", "sourceData": "##\n# (C) Tenable, Inc.\n#\n# The package checks in this plugin were extracted from\n# Rocky Linux Security Advisory RLSA-2022:5313.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(162849);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27776\",\n \"CVE-2022-27782\"\n );\n script_xref(name:\"RLSA\", value:\"2022:5313\");\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Rocky Linux 8 : curl (RLSA-2022:5313)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Rocky Linux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Rocky Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nRLSA-2022:5313 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://errata.rockylinux.org/RLSA-2022:5313\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/show_bug.cgi?id=2077541\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/show_bug.cgi?id=2077547\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/show_bug.cgi?id=2078408\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/show_bug.cgi?id=2082215\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/07\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/08\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:rocky:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:rocky:linux:curl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:rocky:linux:curl-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:rocky:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:rocky:linux:libcurl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:rocky:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:rocky:linux:libcurl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:rocky:linux:libcurl-minimal-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:rocky:linux:8\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Rocky Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RockyLinux/release\", \"Host/RockyLinux/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nvar release = get_kb_item('Host/RockyLinux/release');\nif (isnull(release) || 'Rocky Linux' >!< release) audit(AUDIT_OS_NOT, 'Rocky Linux');\nvar os_ver = pregmatch(pattern: \"Rocky(?: Linux)? release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Rocky Linux');\nvar os_ver = os_ver[1];\nif (! preg(pattern:\"^8([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'Rocky Linux 8.x', 'Rocky Linux ' + os_ver);\n\nif (!get_kb_item('Host/RockyLinux/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Rocky Linux', cpu);\n\nvar pkgs = [\n {'reference':'curl-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var sp = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = 'Rocky-' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && release && (!exists_check || rpm_exists(release:release, rpm:exists_check))) {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / curl-debuginfo / curl-debugsource / libcurl / libcurl-debuginfo / etc');\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:24:56", "description": "The remote Oracle Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2022-5313 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-06-30T00:00:00", "type": "nessus", "title": "Oracle Linux 8 : curl (ELSA-2022-5313)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27782"], "modified": "2022-12-05T00:00:00", "cpe": ["cpe:/o:oracle:linux:8", "p-cpe:/a:oracle:linux:curl", "p-cpe:/a:oracle:linux:libcurl", "p-cpe:/a:oracle:linux:libcurl-devel", "p-cpe:/a:oracle:linux:libcurl-minimal"], "id": "ORACLELINUX_ELSA-2022-5313.NASL", "href": "https://www.tenable.com/plugins/nessus/162626", "sourceData": "##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Oracle Linux Security Advisory ELSA-2022-5313.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(162626);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27776\",\n \"CVE-2022-27782\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Oracle Linux 8 : curl (ELSA-2022-5313)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Oracle Linux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Oracle Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nELSA-2022-5313 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://linux.oracle.com/errata/ELSA-2022-5313.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/06/30\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/06/30\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:8\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libcurl-minimal\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/local_checks_enabled\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item('Host/OracleLinux')) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar release = get_kb_item(\"Host/RedHat/release\");\nif (isnull(release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:release)) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar os_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Oracle Linux');\nvar os_ver = os_ver[1];\nif (! preg(pattern:\"^8([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'Oracle Linux 8', 'Oracle Linux ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Oracle Linux', cpu);\n\nvar pkgs = [\n {'reference':'curl-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var sp = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = 'EL' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && release) {\n if (exists_check) {\n if (rpm_exists(release:release, rpm:exists_check) && rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n } else {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / libcurl / libcurl-devel / etc');\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-24T00:32:37", "description": "The remote Redhat Enterprise Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2022:5313 advisory.\n\n - curl: OAUTH2 bearer bypass in connection re-use (CVE-2022-22576)\n\n - curl: credential leak on redirect (CVE-2022-27774)\n\n - curl: auth/cookie leak on redirect (CVE-2022-27776)\n\n - curl: TLS and SSH connection too eager reuse (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-07-01T00:00:00", "type": "nessus", "title": "RHEL 8 : curl (RHSA-2022:5313)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27782"], "modified": "2023-01-23T00:00:00", "cpe": ["cpe:/o:redhat:enterprise_linux:8", "cpe:/o:redhat:rhel_aus:8.6", "cpe:/o:redhat:rhel_e4s:8.6", "cpe:/o:redhat:rhel_eus:8.6", "cpe:/o:redhat:rhel_tus:8.6", "p-cpe:/a:redhat:enterprise_linux:curl", "p-cpe:/a:redhat:enterprise_linux:libcurl", "p-cpe:/a:redhat:enterprise_linux:libcurl-devel", "p-cpe:/a:redhat:enterprise_linux:libcurl-minimal"], "id": "REDHAT-RHSA-2022-5313.NASL", "href": "https://www.tenable.com/plugins/nessus/162633", "sourceData": "##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Red Hat Security Advisory RHSA-2022:5313. The text\n# itself is copyright (C) Red Hat, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(162633);\n script_version(\"1.7\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/01/23\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27776\",\n \"CVE-2022-27782\"\n );\n script_xref(name:\"RHSA\", value:\"2022:5313\");\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"RHEL 8 : curl (RHSA-2022:5313)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Red Hat host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Redhat Enterprise Linux 8 host has packages installed that are affected by multiple vulnerabilities as\nreferenced in the RHSA-2022:5313 advisory.\n\n - curl: OAUTH2 bearer bypass in connection re-use (CVE-2022-22576)\n\n - curl: credential leak on redirect (CVE-2022-27774)\n\n - curl: auth/cookie leak on redirect (CVE-2022-27776)\n\n - curl: TLS and SSH connection too eager reuse (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/security/cve/CVE-2022-22576\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/security/cve/CVE-2022-27774\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/security/cve/CVE-2022-27776\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/security/cve/CVE-2022-27782\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/errata/RHSA-2022:5313\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/2077541\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/2077547\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/2078408\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/2082215\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n script_cwe_id(287, 295, 522);\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/06/30\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/01\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:8\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:rhel_aus:8.6\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:rhel_e4s:8.6\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:rhel_eus:8.6\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:rhel_tus:8.6\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcurl-minimal\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022-2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"redhat_repos.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\ninclude('rhel.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nvar os_release = get_kb_item('Host/RedHat/release');\nif (isnull(os_release) || 'Red Hat' >!< os_release) audit(AUDIT_OS_NOT, 'Red Hat');\nvar os_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:os_release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Red Hat');\nos_ver = os_ver[1];\nif (!rhel_check_release(operator: 'ge', os_version: os_ver, rhel_version: '8')) audit(AUDIT_OS_NOT, 'Red Hat 8.x', 'Red Hat ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Red Hat', cpu);\n\nvar constraints = [\n {\n 'repo_relative_urls': [\n 'content/aus/rhel8/8.6/x86_64/appstream/debug',\n 'content/aus/rhel8/8.6/x86_64/appstream/os',\n 'content/aus/rhel8/8.6/x86_64/appstream/source/SRPMS',\n 'content/aus/rhel8/8.6/x86_64/baseos/debug',\n 'content/aus/rhel8/8.6/x86_64/baseos/os',\n 'content/aus/rhel8/8.6/x86_64/baseos/source/SRPMS',\n 'content/e4s/rhel8/8.6/ppc64le/appstream/debug',\n 'content/e4s/rhel8/8.6/ppc64le/appstream/os',\n 'content/e4s/rhel8/8.6/ppc64le/appstream/source/SRPMS',\n 'content/e4s/rhel8/8.6/ppc64le/baseos/debug',\n 'content/e4s/rhel8/8.6/ppc64le/baseos/os',\n 'content/e4s/rhel8/8.6/ppc64le/baseos/source/SRPMS',\n 'content/e4s/rhel8/8.6/ppc64le/highavailability/debug',\n 'content/e4s/rhel8/8.6/ppc64le/highavailability/os',\n 'content/e4s/rhel8/8.6/ppc64le/highavailability/source/SRPMS',\n 'content/e4s/rhel8/8.6/ppc64le/sap-solutions/debug',\n 'content/e4s/rhel8/8.6/ppc64le/sap-solutions/os',\n 'content/e4s/rhel8/8.6/ppc64le/sap-solutions/source/SRPMS',\n 'content/e4s/rhel8/8.6/ppc64le/sap/debug',\n 'content/e4s/rhel8/8.6/ppc64le/sap/os',\n 'content/e4s/rhel8/8.6/ppc64le/sap/source/SRPMS',\n 'content/e4s/rhel8/8.6/x86_64/appstream/debug',\n 'content/e4s/rhel8/8.6/x86_64/appstream/os',\n 'content/e4s/rhel8/8.6/x86_64/appstream/source/SRPMS',\n 'content/e4s/rhel8/8.6/x86_64/baseos/debug',\n 'content/e4s/rhel8/8.6/x86_64/baseos/os',\n 'content/e4s/rhel8/8.6/x86_64/baseos/source/SRPMS',\n 'content/e4s/rhel8/8.6/x86_64/highavailability/debug',\n 'content/e4s/rhel8/8.6/x86_64/highavailability/os',\n 'content/e4s/rhel8/8.6/x86_64/highavailability/source/SRPMS',\n 'content/e4s/rhel8/8.6/x86_64/sap-solutions/debug',\n 'content/e4s/rhel8/8.6/x86_64/sap-solutions/os',\n 'content/e4s/rhel8/8.6/x86_64/sap-solutions/source/SRPMS',\n 'content/e4s/rhel8/8.6/x86_64/sap/debug',\n 'content/e4s/rhel8/8.6/x86_64/sap/os',\n 'content/e4s/rhel8/8.6/x86_64/sap/source/SRPMS',\n 'content/eus/rhel8/8.6/aarch64/appstream/debug',\n 'content/eus/rhel8/8.6/aarch64/appstream/os',\n 'content/eus/rhel8/8.6/aarch64/appstream/source/SRPMS',\n 'content/eus/rhel8/8.6/aarch64/baseos/debug',\n 'content/eus/rhel8/8.6/aarch64/baseos/os',\n 'content/eus/rhel8/8.6/aarch64/baseos/source/SRPMS',\n 'content/eus/rhel8/8.6/aarch64/codeready-builder/debug',\n 'content/eus/rhel8/8.6/aarch64/codeready-builder/os',\n 'content/eus/rhel8/8.6/aarch64/codeready-builder/source/SRPMS',\n 'content/eus/rhel8/8.6/aarch64/highavailability/debug',\n 'content/eus/rhel8/8.6/aarch64/highavailability/os',\n 'content/eus/rhel8/8.6/aarch64/highavailability/source/SRPMS',\n 'content/eus/rhel8/8.6/aarch64/supplementary/debug',\n 'content/eus/rhel8/8.6/aarch64/supplementary/os',\n 'content/eus/rhel8/8.6/aarch64/supplementary/source/SRPMS',\n 'content/eus/rhel8/8.6/ppc64le/appstream/debug',\n 'content/eus/rhel8/8.6/ppc64le/appstream/os',\n 'content/eus/rhel8/8.6/ppc64le/appstream/source/SRPMS',\n 'content/eus/rhel8/8.6/ppc64le/baseos/debug',\n 'content/eus/rhel8/8.6/ppc64le/baseos/os',\n 'content/eus/rhel8/8.6/ppc64le/baseos/source/SRPMS',\n 'content/eus/rhel8/8.6/ppc64le/codeready-builder/debug',\n 'content/eus/rhel8/8.6/ppc64le/codeready-builder/os',\n 'content/eus/rhel8/8.6/ppc64le/codeready-builder/source/SRPMS',\n 'content/eus/rhel8/8.6/ppc64le/highavailability/debug',\n 'content/eus/rhel8/8.6/ppc64le/highavailability/os',\n 'content/eus/rhel8/8.6/ppc64le/highavailability/source/SRPMS',\n 'content/eus/rhel8/8.6/ppc64le/resilientstorage/debug',\n 'content/eus/rhel8/8.6/ppc64le/resilientstorage/os',\n 'content/eus/rhel8/8.6/ppc64le/resilientstorage/source/SRPMS',\n 'content/eus/rhel8/8.6/ppc64le/sap-solutions/debug',\n 'content/eus/rhel8/8.6/ppc64le/sap-solutions/os',\n 'content/eus/rhel8/8.6/ppc64le/sap-solutions/source/SRPMS',\n 'content/eus/rhel8/8.6/ppc64le/sap/debug',\n 'content/eus/rhel8/8.6/ppc64le/sap/os',\n 'content/eus/rhel8/8.6/ppc64le/sap/source/SRPMS',\n 'content/eus/rhel8/8.6/ppc64le/supplementary/debug',\n 'content/eus/rhel8/8.6/ppc64le/supplementary/os',\n 'content/eus/rhel8/8.6/ppc64le/supplementary/source/SRPMS',\n 'content/eus/rhel8/8.6/s390x/appstream/debug',\n 'content/eus/rhel8/8.6/s390x/appstream/os',\n 'content/eus/rhel8/8.6/s390x/appstream/source/SRPMS',\n 'content/eus/rhel8/8.6/s390x/baseos/debug',\n 'content/eus/rhel8/8.6/s390x/baseos/os',\n 'content/eus/rhel8/8.6/s390x/baseos/source/SRPMS',\n 'content/eus/rhel8/8.6/s390x/codeready-builder/debug',\n 'content/eus/rhel8/8.6/s390x/codeready-builder/os',\n 'content/eus/rhel8/8.6/s390x/codeready-builder/source/SRPMS',\n 'content/eus/rhel8/8.6/s390x/highavailability/debug',\n 'content/eus/rhel8/8.6/s390x/highavailability/os',\n 'content/eus/rhel8/8.6/s390x/highavailability/source/SRPMS',\n 'content/eus/rhel8/8.6/s390x/resilientstorage/debug',\n 'content/eus/rhel8/8.6/s390x/resilientstorage/os',\n 'content/eus/rhel8/8.6/s390x/resilientstorage/source/SRPMS',\n 'content/eus/rhel8/8.6/s390x/sap/debug',\n 'content/eus/rhel8/8.6/s390x/sap/os',\n 'content/eus/rhel8/8.6/s390x/sap/source/SRPMS',\n 'content/eus/rhel8/8.6/s390x/supplementary/debug',\n 'content/eus/rhel8/8.6/s390x/supplementary/os',\n 'content/eus/rhel8/8.6/s390x/supplementary/source/SRPMS',\n 'content/eus/rhel8/8.6/x86_64/appstream/debug',\n 'content/eus/rhel8/8.6/x86_64/appstream/os',\n 'content/eus/rhel8/8.6/x86_64/appstream/source/SRPMS',\n 'content/eus/rhel8/8.6/x86_64/baseos/debug',\n 'content/eus/rhel8/8.6/x86_64/baseos/os',\n 'content/eus/rhel8/8.6/x86_64/baseos/source/SRPMS',\n 'content/eus/rhel8/8.6/x86_64/codeready-builder/debug',\n 'content/eus/rhel8/8.6/x86_64/codeready-builder/os',\n 'content/eus/rhel8/8.6/x86_64/codeready-builder/source/SRPMS',\n 'content/eus/rhel8/8.6/x86_64/highavailability/debug',\n 'content/eus/rhel8/8.6/x86_64/highavailability/os',\n 'content/eus/rhel8/8.6/x86_64/highavailability/source/SRPMS',\n 'content/eus/rhel8/8.6/x86_64/resilientstorage/debug',\n 'content/eus/rhel8/8.6/x86_64/resilientstorage/os',\n 'content/eus/rhel8/8.6/x86_64/resilientstorage/source/SRPMS',\n 'content/eus/rhel8/8.6/x86_64/sap-solutions/debug',\n 'content/eus/rhel8/8.6/x86_64/sap-solutions/os',\n 'content/eus/rhel8/8.6/x86_64/sap-solutions/source/SRPMS',\n 'content/eus/rhel8/8.6/x86_64/sap/debug',\n 'content/eus/rhel8/8.6/x86_64/sap/os',\n 'content/eus/rhel8/8.6/x86_64/sap/source/SRPMS',\n 'content/eus/rhel8/8.6/x86_64/supplementary/debug',\n 'content/eus/rhel8/8.6/x86_64/supplementary/os',\n 'content/eus/rhel8/8.6/x86_64/supplementary/source/SRPMS',\n 'content/tus/rhel8/8.6/x86_64/appstream/debug',\n 'content/tus/rhel8/8.6/x86_64/appstream/os',\n 'content/tus/rhel8/8.6/x86_64/appstream/source/SRPMS',\n 'content/tus/rhel8/8.6/x86_64/baseos/debug',\n 'content/tus/rhel8/8.6/x86_64/baseos/os',\n 'content/tus/rhel8/8.6/x86_64/baseos/source/SRPMS',\n 'content/tus/rhel8/8.6/x86_64/highavailability/debug',\n 'content/tus/rhel8/8.6/x86_64/highavailability/os',\n 'content/tus/rhel8/8.6/x86_64/highavailability/source/SRPMS',\n 'content/tus/rhel8/8.6/x86_64/rt/os',\n 'content/tus/rhel8/8.6/x86_64/rt/source/SRPMS'\n ],\n 'pkgs': [\n {'reference':'curl-7.61.1-22.el8_6.3', 'sp':'6', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-22.el8_6.3', 'sp':'6', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-22.el8_6.3', 'sp':'6', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.61.1-22.el8_6.3', 'sp':'6', 'release':'8', 'rpm_spec_vers_cmp':TRUE}\n ]\n },\n {\n 'repo_relative_urls': [\n 'content/dist/rhel8/8/aarch64/appstream/debug',\n 'content/dist/rhel8/8/aarch64/appstream/os',\n 'content/dist/rhel8/8/aarch64/appstream/source/SRPMS',\n 'content/dist/rhel8/8/aarch64/baseos/debug',\n 'content/dist/rhel8/8/aarch64/baseos/os',\n 'content/dist/rhel8/8/aarch64/baseos/source/SRPMS',\n 'content/dist/rhel8/8/aarch64/codeready-builder/debug',\n 'content/dist/rhel8/8/aarch64/codeready-builder/os',\n 'content/dist/rhel8/8/aarch64/codeready-builder/source/SRPMS',\n 'content/dist/rhel8/8/aarch64/highavailability/debug',\n 'content/dist/rhel8/8/aarch64/highavailability/os',\n 'content/dist/rhel8/8/aarch64/highavailability/source/SRPMS',\n 'content/dist/rhel8/8/aarch64/supplementary/debug',\n 'content/dist/rhel8/8/aarch64/supplementary/os',\n 'content/dist/rhel8/8/aarch64/supplementary/source/SRPMS',\n 'content/dist/rhel8/8/ppc64le/appstream/debug',\n 'content/dist/rhel8/8/ppc64le/appstream/os',\n 'content/dist/rhel8/8/ppc64le/appstream/source/SRPMS',\n 'content/dist/rhel8/8/ppc64le/baseos/debug',\n 'content/dist/rhel8/8/ppc64le/baseos/os',\n 'content/dist/rhel8/8/ppc64le/baseos/source/SRPMS',\n 'content/dist/rhel8/8/ppc64le/codeready-builder/debug',\n 'content/dist/rhel8/8/ppc64le/codeready-builder/os',\n 'content/dist/rhel8/8/ppc64le/codeready-builder/source/SRPMS',\n 'content/dist/rhel8/8/ppc64le/highavailability/debug',\n 'content/dist/rhel8/8/ppc64le/highavailability/os',\n 'content/dist/rhel8/8/ppc64le/highavailability/source/SRPMS',\n 'content/dist/rhel8/8/ppc64le/resilientstorage/debug',\n 'content/dist/rhel8/8/ppc64le/resilientstorage/os',\n 'content/dist/rhel8/8/ppc64le/resilientstorage/source/SRPMS',\n 'content/dist/rhel8/8/ppc64le/sap-solutions/debug',\n 'content/dist/rhel8/8/ppc64le/sap-solutions/os',\n 'content/dist/rhel8/8/ppc64le/sap-solutions/source/SRPMS',\n 'content/dist/rhel8/8/ppc64le/sap/debug',\n 'content/dist/rhel8/8/ppc64le/sap/os',\n 'content/dist/rhel8/8/ppc64le/sap/source/SRPMS',\n 'content/dist/rhel8/8/ppc64le/supplementary/debug',\n 'content/dist/rhel8/8/ppc64le/supplementary/os',\n 'content/dist/rhel8/8/ppc64le/supplementary/source/SRPMS',\n 'content/dist/rhel8/8/s390x/appstream/debug',\n 'content/dist/rhel8/8/s390x/appstream/os',\n 'content/dist/rhel8/8/s390x/appstream/source/SRPMS',\n 'content/dist/rhel8/8/s390x/baseos/debug',\n 'content/dist/rhel8/8/s390x/baseos/os',\n 'content/dist/rhel8/8/s390x/baseos/source/SRPMS',\n 'content/dist/rhel8/8/s390x/codeready-builder/debug',\n 'content/dist/rhel8/8/s390x/codeready-builder/os',\n 'content/dist/rhel8/8/s390x/codeready-builder/source/SRPMS',\n 'content/dist/rhel8/8/s390x/highavailability/debug',\n 'content/dist/rhel8/8/s390x/highavailability/os',\n 'content/dist/rhel8/8/s390x/highavailability/source/SRPMS',\n 'content/dist/rhel8/8/s390x/resilientstorage/debug',\n 'content/dist/rhel8/8/s390x/resilientstorage/os',\n 'content/dist/rhel8/8/s390x/resilientstorage/source/SRPMS',\n 'content/dist/rhel8/8/s390x/sap/debug',\n 'content/dist/rhel8/8/s390x/sap/os',\n 'content/dist/rhel8/8/s390x/sap/source/SRPMS',\n 'content/dist/rhel8/8/s390x/supplementary/debug',\n 'content/dist/rhel8/8/s390x/supplementary/os',\n 'content/dist/rhel8/8/s390x/supplementary/source/SRPMS',\n 'content/dist/rhel8/8/x86_64/appstream/debug',\n 'content/dist/rhel8/8/x86_64/appstream/os',\n 'content/dist/rhel8/8/x86_64/appstream/source/SRPMS',\n 'content/dist/rhel8/8/x86_64/baseos/debug',\n 'content/dist/rhel8/8/x86_64/baseos/os',\n 'content/dist/rhel8/8/x86_64/baseos/source/SRPMS',\n 'content/dist/rhel8/8/x86_64/codeready-builder/debug',\n 'content/dist/rhel8/8/x86_64/codeready-builder/os',\n 'content/dist/rhel8/8/x86_64/codeready-builder/source/SRPMS',\n 'content/dist/rhel8/8/x86_64/highavailability/debug',\n 'content/dist/rhel8/8/x86_64/highavailability/os',\n 'content/dist/rhel8/8/x86_64/highavailability/source/SRPMS',\n 'content/dist/rhel8/8/x86_64/nfv/debug',\n 'content/dist/rhel8/8/x86_64/nfv/os',\n 'content/dist/rhel8/8/x86_64/nfv/source/SRPMS',\n 'content/dist/rhel8/8/x86_64/resilientstorage/debug',\n 'content/dist/rhel8/8/x86_64/resilientstorage/os',\n 'content/dist/rhel8/8/x86_64/resilientstorage/source/SRPMS',\n 'content/dist/rhel8/8/x86_64/rt/debug',\n 'content/dist/rhel8/8/x86_64/rt/os',\n 'content/dist/rhel8/8/x86_64/rt/source/SRPMS',\n 'content/dist/rhel8/8/x86_64/sap-solutions/debug',\n 'content/dist/rhel8/8/x86_64/sap-solutions/os',\n 'content/dist/rhel8/8/x86_64/sap-solutions/source/SRPMS',\n 'content/dist/rhel8/8/x86_64/sap/debug',\n 'content/dist/rhel8/8/x86_64/sap/os',\n 'content/dist/rhel8/8/x86_64/sap/source/SRPMS',\n 'content/dist/rhel8/8/x86_64/supplementary/debug',\n 'content/dist/rhel8/8/x86_64/supplementary/os',\n 'content/dist/rhel8/8/x86_64/supplementary/source/SRPMS'\n ],\n 'pkgs': [\n {'reference':'curl-7.61.1-22.el8_6.3', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-22.el8_6.3', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-22.el8_6.3', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.61.1-22.el8_6.3', 'release':'8', 'rpm_spec_vers_cmp':TRUE}\n ]\n }\n];\n\nvar applicable_repo_urls = rhel_determine_applicable_repository_urls(constraints:constraints);\nif(applicable_repo_urls == RHEL_REPOS_NO_OVERLAP_MESSAGE) exit(0, RHEL_REPO_NOT_ENABLED);\n\nvar flag = 0;\nforeach var constraint_array ( constraints ) {\n var repo_relative_urls = NULL;\n if (!empty_or_null(constraint_array['repo_relative_urls'])) repo_relative_urls = constraint_array['repo_relative_urls'];\n var enterprise_linux_flag = rhel_repo_urls_has_content_dist_rhel(repo_urls:repo_relative_urls);\n foreach var pkg ( constraint_array['pkgs'] ) {\n var reference = NULL;\n var _release = NULL;\n var sp = NULL;\n var _cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(pkg['reference'])) reference = pkg['reference'];\n if (!empty_or_null(pkg['release'])) _release = 'RHEL' + pkg['release'];\n if (!empty_or_null(pkg['sp']) && !enterprise_linux_flag) sp = pkg['sp'];\n if (!empty_or_null(pkg['cpu'])) _cpu = pkg['cpu'];\n if (!empty_or_null(pkg['el_string'])) el_string = pkg['el_string'];\n if (!empty_or_null(pkg['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = pkg['rpm_spec_vers_cmp'];\n if (!empty_or_null(pkg['epoch'])) epoch = pkg['epoch'];\n if (!empty_or_null(pkg['allowmaj'])) allowmaj = pkg['allowmaj'];\n if (!empty_or_null(pkg['exists_check'])) exists_check = pkg['exists_check'];\n if (reference &&\n _release &&\n rhel_decide_repo_relative_url_check(required_repo_url_list:repo_relative_urls) &&\n (applicable_repo_urls || (!exists_check || rpm_exists(release:_release, rpm:exists_check))) &&\n rpm_check(release:_release, sp:sp, cpu:_cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n var extra = NULL;\n if (empty_or_null(applicable_repo_urls)) extra = rpm_report_get() + redhat_report_repo_caveat();\n else extra = rpm_report_get() + redhat_report_package_caveat();\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : extra\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / libcurl / libcurl-devel / libcurl-minimal');\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-02-04T00:40:35", "description": "The remote Redhat Enterprise Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2022:5245 advisory.\n\n - curl: OAUTH2 bearer bypass in connection re-use (CVE-2022-22576)\n\n - curl: credential leak on redirect (CVE-2022-27774)\n\n - curl: auth/cookie leak on redirect (CVE-2022-27776)\n\n - curl: TLS and SSH connection too eager reuse (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-07-01T00:00:00", "type": "nessus", "title": "RHEL 9 : curl (RHSA-2022:5245)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27782"], "modified": "2023-02-02T00:00:00", "cpe": ["cpe:/o:redhat:enterprise_linux:9", "cpe:/o:redhat:rhel_e4s:9.0", "cpe:/o:redhat:rhel_eus:9.0", "p-cpe:/a:redhat:enterprise_linux:curl", "p-cpe:/a:redhat:enterprise_linux:curl-minimal", "p-cpe:/a:redhat:enterprise_linux:libcurl", "p-cpe:/a:redhat:enterprise_linux:libcurl-devel", "p-cpe:/a:redhat:enterprise_linux:libcurl-minimal"], "id": "REDHAT-RHSA-2022-5245.NASL", "href": "https://www.tenable.com/plugins/nessus/162655", "sourceData": "##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Red Hat Security Advisory RHSA-2022:5245. The text\n# itself is copyright (C) Red Hat, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(162655);\n script_version(\"1.7\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/02/02\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27776\",\n \"CVE-2022-27782\"\n );\n script_xref(name:\"RHSA\", value:\"2022:5245\");\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"RHEL 9 : curl (RHSA-2022:5245)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Red Hat host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Redhat Enterprise Linux 9 host has packages installed that are affected by multiple vulnerabilities as\nreferenced in the RHSA-2022:5245 advisory.\n\n - curl: OAUTH2 bearer bypass in connection re-use (CVE-2022-22576)\n\n - curl: credential leak on redirect (CVE-2022-27774)\n\n - curl: auth/cookie leak on redirect (CVE-2022-27776)\n\n - curl: TLS and SSH connection too eager reuse (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/security/cve/CVE-2022-22576\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/security/cve/CVE-2022-27774\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/security/cve/CVE-2022-27776\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/security/cve/CVE-2022-27782\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/errata/RHSA-2022:5245\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/2077541\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/2077547\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/2078408\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/2082215\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n script_cwe_id(287, 295, 522);\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/01\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/01\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:9\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:rhel_e4s:9.0\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:rhel_eus:9.0\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:curl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcurl-minimal\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022-2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"redhat_repos.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\ninclude('rhel.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nvar os_release = get_kb_item('Host/RedHat/release');\nif (isnull(os_release) || 'Red Hat' >!< os_release) audit(AUDIT_OS_NOT, 'Red Hat');\nvar os_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:os_release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Red Hat');\nos_ver = os_ver[1];\nif (!rhel_check_release(operator: 'ge', os_version: os_ver, rhel_version: '9')) audit(AUDIT_OS_NOT, 'Red Hat 9.x', 'Red Hat ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Red Hat', cpu);\n\nvar constraints = [\n {\n 'repo_relative_urls': [\n 'content/dist/rhel9/9/aarch64/appstream/debug',\n 'content/dist/rhel9/9/aarch64/appstream/os',\n 'content/dist/rhel9/9/aarch64/appstream/source/SRPMS',\n 'content/dist/rhel9/9/aarch64/baseos/debug',\n 'content/dist/rhel9/9/aarch64/baseos/os',\n 'content/dist/rhel9/9/aarch64/baseos/source/SRPMS',\n 'content/dist/rhel9/9/aarch64/codeready-builder/debug',\n 'content/dist/rhel9/9/aarch64/codeready-builder/os',\n 'content/dist/rhel9/9/aarch64/codeready-builder/source/SRPMS',\n 'content/dist/rhel9/9/aarch64/highavailability/debug',\n 'content/dist/rhel9/9/aarch64/highavailability/os',\n 'content/dist/rhel9/9/aarch64/highavailability/source/SRPMS',\n 'content/dist/rhel9/9/aarch64/supplementary/debug',\n 'content/dist/rhel9/9/aarch64/supplementary/os',\n 'content/dist/rhel9/9/aarch64/supplementary/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/appstream/debug',\n 'content/dist/rhel9/9/ppc64le/appstream/os',\n 'content/dist/rhel9/9/ppc64le/appstream/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/baseos/debug',\n 'content/dist/rhel9/9/ppc64le/baseos/os',\n 'content/dist/rhel9/9/ppc64le/baseos/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/codeready-builder/debug',\n 'content/dist/rhel9/9/ppc64le/codeready-builder/os',\n 'content/dist/rhel9/9/ppc64le/codeready-builder/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/highavailability/debug',\n 'content/dist/rhel9/9/ppc64le/highavailability/os',\n 'content/dist/rhel9/9/ppc64le/highavailability/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/resilientstorage/debug',\n 'content/dist/rhel9/9/ppc64le/resilientstorage/os',\n 'content/dist/rhel9/9/ppc64le/resilientstorage/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/sap-solutions/debug',\n 'content/dist/rhel9/9/ppc64le/sap-solutions/os',\n 'content/dist/rhel9/9/ppc64le/sap-solutions/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/sap/debug',\n 'content/dist/rhel9/9/ppc64le/sap/os',\n 'content/dist/rhel9/9/ppc64le/sap/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/supplementary/debug',\n 'content/dist/rhel9/9/ppc64le/supplementary/os',\n 'content/dist/rhel9/9/ppc64le/supplementary/source/SRPMS',\n 'content/dist/rhel9/9/s390x/appstream/debug',\n 'content/dist/rhel9/9/s390x/appstream/os',\n 'content/dist/rhel9/9/s390x/appstream/source/SRPMS',\n 'content/dist/rhel9/9/s390x/baseos/debug',\n 'content/dist/rhel9/9/s390x/baseos/os',\n 'content/dist/rhel9/9/s390x/baseos/source/SRPMS',\n 'content/dist/rhel9/9/s390x/codeready-builder/debug',\n 'content/dist/rhel9/9/s390x/codeready-builder/os',\n 'content/dist/rhel9/9/s390x/codeready-builder/source/SRPMS',\n 'content/dist/rhel9/9/s390x/highavailability/debug',\n 'content/dist/rhel9/9/s390x/highavailability/os',\n 'content/dist/rhel9/9/s390x/highavailability/source/SRPMS',\n 'content/dist/rhel9/9/s390x/resilientstorage/debug',\n 'content/dist/rhel9/9/s390x/resilientstorage/os',\n 'content/dist/rhel9/9/s390x/resilientstorage/source/SRPMS',\n 'content/dist/rhel9/9/s390x/sap/debug',\n 'content/dist/rhel9/9/s390x/sap/os',\n 'content/dist/rhel9/9/s390x/sap/source/SRPMS',\n 'content/dist/rhel9/9/s390x/supplementary/debug',\n 'content/dist/rhel9/9/s390x/supplementary/os',\n 'content/dist/rhel9/9/s390x/supplementary/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/appstream/debug',\n 'content/dist/rhel9/9/x86_64/appstream/os',\n 'content/dist/rhel9/9/x86_64/appstream/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/baseos/debug',\n 'content/dist/rhel9/9/x86_64/baseos/os',\n 'content/dist/rhel9/9/x86_64/baseos/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/codeready-builder/debug',\n 'content/dist/rhel9/9/x86_64/codeready-builder/os',\n 'content/dist/rhel9/9/x86_64/codeready-builder/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/highavailability/debug',\n 'content/dist/rhel9/9/x86_64/highavailability/os',\n 'content/dist/rhel9/9/x86_64/highavailability/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/nfv/debug',\n 'content/dist/rhel9/9/x86_64/nfv/os',\n 'content/dist/rhel9/9/x86_64/nfv/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/resilientstorage/debug',\n 'content/dist/rhel9/9/x86_64/resilientstorage/os',\n 'content/dist/rhel9/9/x86_64/resilientstorage/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/rt/debug',\n 'content/dist/rhel9/9/x86_64/rt/os',\n 'content/dist/rhel9/9/x86_64/rt/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/sap-solutions/debug',\n 'content/dist/rhel9/9/x86_64/sap-solutions/os',\n 'content/dist/rhel9/9/x86_64/sap-solutions/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/sap/debug',\n 'content/dist/rhel9/9/x86_64/sap/os',\n 'content/dist/rhel9/9/x86_64/sap/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/supplementary/debug',\n 'content/dist/rhel9/9/x86_64/supplementary/os',\n 'content/dist/rhel9/9/x86_64/supplementary/source/SRPMS'\n ],\n 'pkgs': [\n {'reference':'curl-7.76.1-14.el9_0.4', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.76.1-14.el9_0.4', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.76.1-14.el9_0.4', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.76.1-14.el9_0.4', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.76.1-14.el9_0.4', 'release':'9', 'rpm_spec_vers_cmp':TRUE}\n ]\n },\n {\n 'repo_relative_urls': [\n 'content/e4s/rhel9/9.0/aarch64/appstream/debug',\n 'content/e4s/rhel9/9.0/aarch64/appstream/os',\n 'content/e4s/rhel9/9.0/aarch64/appstream/source/SRPMS',\n 'content/e4s/rhel9/9.0/aarch64/baseos/debug',\n 'content/e4s/rhel9/9.0/aarch64/baseos/os',\n 'content/e4s/rhel9/9.0/aarch64/baseos/source/SRPMS',\n 'content/e4s/rhel9/9.0/aarch64/highavailability/debug',\n 'content/e4s/rhel9/9.0/aarch64/highavailability/os',\n 'content/e4s/rhel9/9.0/aarch64/highavailability/source/SRPMS',\n 'content/e4s/rhel9/9.0/ppc64le/appstream/debug',\n 'content/e4s/rhel9/9.0/ppc64le/appstream/os',\n 'content/e4s/rhel9/9.0/ppc64le/appstream/source/SRPMS',\n 'content/e4s/rhel9/9.0/ppc64le/baseos/debug',\n 'content/e4s/rhel9/9.0/ppc64le/baseos/os',\n 'content/e4s/rhel9/9.0/ppc64le/baseos/source/SRPMS',\n 'content/e4s/rhel9/9.0/ppc64le/highavailability/debug',\n 'content/e4s/rhel9/9.0/ppc64le/highavailability/os',\n 'content/e4s/rhel9/9.0/ppc64le/highavailability/source/SRPMS',\n 'content/e4s/rhel9/9.0/ppc64le/resilientstorage/debug',\n 'content/e4s/rhel9/9.0/ppc64le/resilientstorage/os',\n 'content/e4s/rhel9/9.0/ppc64le/resilientstorage/source/SRPMS',\n 'content/e4s/rhel9/9.0/ppc64le/sap-solutions/debug',\n 'content/e4s/rhel9/9.0/ppc64le/sap-solutions/os',\n 'content/e4s/rhel9/9.0/ppc64le/sap-solutions/source/SRPMS',\n 'content/e4s/rhel9/9.0/ppc64le/sap/debug',\n 'content/e4s/rhel9/9.0/ppc64le/sap/os',\n 'content/e4s/rhel9/9.0/ppc64le/sap/source/SRPMS',\n 'content/e4s/rhel9/9.0/s390x/appstream/debug',\n 'content/e4s/rhel9/9.0/s390x/appstream/os',\n 'content/e4s/rhel9/9.0/s390x/appstream/source/SRPMS',\n 'content/e4s/rhel9/9.0/s390x/baseos/debug',\n 'content/e4s/rhel9/9.0/s390x/baseos/os',\n 'content/e4s/rhel9/9.0/s390x/baseos/source/SRPMS',\n 'content/e4s/rhel9/9.0/s390x/highavailability/debug',\n 'content/e4s/rhel9/9.0/s390x/highavailability/os',\n 'content/e4s/rhel9/9.0/s390x/highavailability/source/SRPMS',\n 'content/e4s/rhel9/9.0/s390x/resilientstorage/debug',\n 'content/e4s/rhel9/9.0/s390x/resilientstorage/os',\n 'content/e4s/rhel9/9.0/s390x/resilientstorage/source/SRPMS',\n 'content/e4s/rhel9/9.0/s390x/sap/debug',\n 'content/e4s/rhel9/9.0/s390x/sap/os',\n 'content/e4s/rhel9/9.0/s390x/sap/source/SRPMS',\n 'content/e4s/rhel9/9.0/x86_64/appstream/debug',\n 'content/e4s/rhel9/9.0/x86_64/appstream/os',\n 'content/e4s/rhel9/9.0/x86_64/appstream/source/SRPMS',\n 'content/e4s/rhel9/9.0/x86_64/baseos/debug',\n 'content/e4s/rhel9/9.0/x86_64/baseos/os',\n 'content/e4s/rhel9/9.0/x86_64/baseos/source/SRPMS',\n 'content/e4s/rhel9/9.0/x86_64/highavailability/debug',\n 'content/e4s/rhel9/9.0/x86_64/highavailability/os',\n 'content/e4s/rhel9/9.0/x86_64/highavailability/source/SRPMS',\n 'content/e4s/rhel9/9.0/x86_64/nfv/debug',\n 'content/e4s/rhel9/9.0/x86_64/nfv/os',\n 'content/e4s/rhel9/9.0/x86_64/nfv/source/SRPMS',\n 'content/e4s/rhel9/9.0/x86_64/resilientstorage/debug',\n 'content/e4s/rhel9/9.0/x86_64/resilientstorage/os',\n 'content/e4s/rhel9/9.0/x86_64/resilientstorage/source/SRPMS',\n 'content/e4s/rhel9/9.0/x86_64/rt/debug',\n 'content/e4s/rhel9/9.0/x86_64/rt/os',\n 'content/e4s/rhel9/9.0/x86_64/rt/source/SRPMS',\n 'content/e4s/rhel9/9.0/x86_64/sap-solutions/debug',\n 'content/e4s/rhel9/9.0/x86_64/sap-solutions/os',\n 'content/e4s/rhel9/9.0/x86_64/sap-solutions/source/SRPMS',\n 'content/e4s/rhel9/9.0/x86_64/sap/debug',\n 'content/e4s/rhel9/9.0/x86_64/sap/os',\n 'content/e4s/rhel9/9.0/x86_64/sap/source/SRPMS',\n 'content/eus/rhel9/9.0/aarch64/appstream/debug',\n 'content/eus/rhel9/9.0/aarch64/appstream/os',\n 'content/eus/rhel9/9.0/aarch64/appstream/source/SRPMS',\n 'content/eus/rhel9/9.0/aarch64/baseos/debug',\n 'content/eus/rhel9/9.0/aarch64/baseos/os',\n 'content/eus/rhel9/9.0/aarch64/baseos/source/SRPMS',\n 'content/eus/rhel9/9.0/aarch64/codeready-builder/debug',\n 'content/eus/rhel9/9.0/aarch64/codeready-builder/os',\n 'content/eus/rhel9/9.0/aarch64/codeready-builder/source/SRPMS',\n 'content/eus/rhel9/9.0/aarch64/highavailability/debug',\n 'content/eus/rhel9/9.0/aarch64/highavailability/os',\n 'content/eus/rhel9/9.0/aarch64/highavailability/source/SRPMS',\n 'content/eus/rhel9/9.0/aarch64/supplementary/debug',\n 'content/eus/rhel9/9.0/aarch64/supplementary/os',\n 'content/eus/rhel9/9.0/aarch64/supplementary/source/SRPMS',\n 'content/eus/rhel9/9.0/ppc64le/appstream/debug',\n 'content/eus/rhel9/9.0/ppc64le/appstream/os',\n 'content/eus/rhel9/9.0/ppc64le/appstream/source/SRPMS',\n 'content/eus/rhel9/9.0/ppc64le/baseos/debug',\n 'content/eus/rhel9/9.0/ppc64le/baseos/os',\n 'content/eus/rhel9/9.0/ppc64le/baseos/source/SRPMS',\n 'content/eus/rhel9/9.0/ppc64le/codeready-builder/debug',\n 'content/eus/rhel9/9.0/ppc64le/codeready-builder/os',\n 'content/eus/rhel9/9.0/ppc64le/codeready-builder/source/SRPMS',\n 'content/eus/rhel9/9.0/ppc64le/highavailability/debug',\n 'content/eus/rhel9/9.0/ppc64le/highavailability/os',\n 'content/eus/rhel9/9.0/ppc64le/highavailability/source/SRPMS',\n 'content/eus/rhel9/9.0/ppc64le/resilientstorage/debug',\n 'content/eus/rhel9/9.0/ppc64le/resilientstorage/os',\n 'content/eus/rhel9/9.0/ppc64le/resilientstorage/source/SRPMS',\n 'content/eus/rhel9/9.0/ppc64le/sap-solutions/debug',\n 'content/eus/rhel9/9.0/ppc64le/sap-solutions/os',\n 'content/eus/rhel9/9.0/ppc64le/sap-solutions/source/SRPMS',\n 'content/eus/rhel9/9.0/ppc64le/sap/debug',\n 'content/eus/rhel9/9.0/ppc64le/sap/os',\n 'content/eus/rhel9/9.0/ppc64le/sap/source/SRPMS',\n 'content/eus/rhel9/9.0/ppc64le/supplementary/debug',\n 'content/eus/rhel9/9.0/ppc64le/supplementary/os',\n 'content/eus/rhel9/9.0/ppc64le/supplementary/source/SRPMS',\n 'content/eus/rhel9/9.0/s390x/appstream/debug',\n 'content/eus/rhel9/9.0/s390x/appstream/os',\n 'content/eus/rhel9/9.0/s390x/appstream/source/SRPMS',\n 'content/eus/rhel9/9.0/s390x/baseos/debug',\n 'content/eus/rhel9/9.0/s390x/baseos/os',\n 'content/eus/rhel9/9.0/s390x/baseos/source/SRPMS',\n 'content/eus/rhel9/9.0/s390x/codeready-builder/debug',\n 'content/eus/rhel9/9.0/s390x/codeready-builder/os',\n 'content/eus/rhel9/9.0/s390x/codeready-builder/source/SRPMS',\n 'content/eus/rhel9/9.0/s390x/highavailability/debug',\n 'content/eus/rhel9/9.0/s390x/highavailability/os',\n 'content/eus/rhel9/9.0/s390x/highavailability/source/SRPMS',\n 'content/eus/rhel9/9.0/s390x/resilientstorage/debug',\n 'content/eus/rhel9/9.0/s390x/resilientstorage/os',\n 'content/eus/rhel9/9.0/s390x/resilientstorage/source/SRPMS',\n 'content/eus/rhel9/9.0/s390x/sap/debug',\n 'content/eus/rhel9/9.0/s390x/sap/os',\n 'content/eus/rhel9/9.0/s390x/sap/source/SRPMS',\n 'content/eus/rhel9/9.0/s390x/supplementary/debug',\n 'content/eus/rhel9/9.0/s390x/supplementary/os',\n 'content/eus/rhel9/9.0/s390x/supplementary/source/SRPMS',\n 'content/eus/rhel9/9.0/x86_64/appstream/debug',\n 'content/eus/rhel9/9.0/x86_64/appstream/os',\n 'content/eus/rhel9/9.0/x86_64/appstream/source/SRPMS',\n 'content/eus/rhel9/9.0/x86_64/baseos/debug',\n 'content/eus/rhel9/9.0/x86_64/baseos/os',\n 'content/eus/rhel9/9.0/x86_64/baseos/source/SRPMS',\n 'content/eus/rhel9/9.0/x86_64/codeready-builder/debug',\n 'content/eus/rhel9/9.0/x86_64/codeready-builder/os',\n 'content/eus/rhel9/9.0/x86_64/codeready-builder/source/SRPMS',\n 'content/eus/rhel9/9.0/x86_64/highavailability/debug',\n 'content/eus/rhel9/9.0/x86_64/highavailability/os',\n 'content/eus/rhel9/9.0/x86_64/highavailability/source/SRPMS',\n 'content/eus/rhel9/9.0/x86_64/resilientstorage/debug',\n 'content/eus/rhel9/9.0/x86_64/resilientstorage/os',\n 'content/eus/rhel9/9.0/x86_64/resilientstorage/source/SRPMS',\n 'content/eus/rhel9/9.0/x86_64/sap-solutions/debug',\n 'content/eus/rhel9/9.0/x86_64/sap-solutions/os',\n 'content/eus/rhel9/9.0/x86_64/sap-solutions/source/SRPMS',\n 'content/eus/rhel9/9.0/x86_64/sap/debug',\n 'content/eus/rhel9/9.0/x86_64/sap/os',\n 'content/eus/rhel9/9.0/x86_64/sap/source/SRPMS',\n 'content/eus/rhel9/9.0/x86_64/supplementary/debug',\n 'content/eus/rhel9/9.0/x86_64/supplementary/os',\n 'content/eus/rhel9/9.0/x86_64/supplementary/source/SRPMS'\n ],\n 'pkgs': [\n {'reference':'curl-7.76.1-14.el9_0.4', 'sp':'0', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.76.1-14.el9_0.4', 'sp':'0', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.76.1-14.el9_0.4', 'sp':'0', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.76.1-14.el9_0.4', 'sp':'0', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.76.1-14.el9_0.4', 'sp':'0', 'release':'9', 'rpm_spec_vers_cmp':TRUE}\n ]\n }\n];\n\nvar applicable_repo_urls = rhel_determine_applicable_repository_urls(constraints:constraints);\nif(applicable_repo_urls == RHEL_REPOS_NO_OVERLAP_MESSAGE) exit(0, RHEL_REPO_NOT_ENABLED);\n\nvar flag = 0;\nforeach var constraint_array ( constraints ) {\n var repo_relative_urls = NULL;\n if (!empty_or_null(constraint_array['repo_relative_urls'])) repo_relative_urls = constraint_array['repo_relative_urls'];\n var enterprise_linux_flag = rhel_repo_urls_has_content_dist_rhel(repo_urls:repo_relative_urls);\n foreach var pkg ( constraint_array['pkgs'] ) {\n var reference = NULL;\n var _release = NULL;\n var sp = NULL;\n var _cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(pkg['reference'])) reference = pkg['reference'];\n if (!empty_or_null(pkg['release'])) _release = 'RHEL' + pkg['release'];\n if (!empty_or_null(pkg['sp']) && !enterprise_linux_flag) sp = pkg['sp'];\n if (!empty_or_null(pkg['cpu'])) _cpu = pkg['cpu'];\n if (!empty_or_null(pkg['el_string'])) el_string = pkg['el_string'];\n if (!empty_or_null(pkg['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = pkg['rpm_spec_vers_cmp'];\n if (!empty_or_null(pkg['epoch'])) epoch = pkg['epoch'];\n if (!empty_or_null(pkg['allowmaj'])) allowmaj = pkg['allowmaj'];\n if (!empty_or_null(pkg['exists_check'])) exists_check = pkg['exists_check'];\n if (reference &&\n _release &&\n rhel_decide_repo_relative_url_check(required_repo_url_list:repo_relative_urls) &&\n (applicable_repo_urls || (!exists_check || rpm_exists(release:_release, rpm:exists_check))) &&\n rpm_check(release:_release, sp:sp, cpu:_cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n var extra = NULL;\n if (empty_or_null(applicable_repo_urls)) extra = rpm_report_get() + redhat_report_repo_caveat();\n else extra = rpm_report_get() + redhat_report_package_caveat();\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : extra\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / curl-minimal / libcurl / libcurl-devel / libcurl-minimal');\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:26:22", "description": "The remote AlmaLinux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the ALSA-2022:5313 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-07-25T00:00:00", "type": "nessus", "title": "AlmaLinux 8 : curl (5313) (ALSA-2022:5313)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27782"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:alma:linux:curl", "p-cpe:/a:alma:linux:libcurl", "p-cpe:/a:alma:linux:libcurl-devel", "p-cpe:/a:alma:linux:libcurl-minimal", "cpe:/o:alma:linux:8"], "id": "ALMA_LINUX_ALSA-2022-5313.NASL", "href": "https://www.tenable.com/plugins/nessus/163440", "sourceData": "##\n# (C) Tenable, Inc.\n#\n# The package checks in this plugin were extracted from\n# AlmaLinux Security Advisory ALSA-2022:5313.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(163440);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27776\",\n \"CVE-2022-27782\"\n );\n script_xref(name:\"ALSA\", value:\"2022:5313\");\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"AlmaLinux 8 : curl (5313) (ALSA-2022:5313)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote AlmaLinux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote AlmaLinux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nALSA-2022:5313 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://errata.almalinux.org/8/ALSA-2022-5313.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/06/30\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/25\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:libcurl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:alma:linux:8\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Alma Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AlmaLinux/release\", \"Host/AlmaLinux/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nvar release = get_kb_item('Host/AlmaLinux/release');\nif (isnull(release) || 'AlmaLinux' >!< release) audit(AUDIT_OS_NOT, 'AlmaLinux');\nvar os_ver = pregmatch(pattern: \"AlmaLinux release ([0-9]+(\\.[0-9]+)?)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'AlmaLinux');\nvar os_ver = os_ver[1];\nif (! preg(pattern:\"^8([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'AlmaLinux 8.x', 'AlmaLinux ' + os_ver);\n\nif (!get_kb_item('Host/AlmaLinux/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'AlmaLinux', cpu);\n\nvar pkgs = [\n {'reference':'curl-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.61.1-22.el8_6.3', 'cpu':'x86_64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.61.1-22.el8_6.3', 'cpu':'aarch64', 'release':'8', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.61.1-22.el8_6.3', 'cpu':'i686', 'release':'8', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var sp = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = 'Alma-' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && release && (!exists_check || rpm_exists(release:release, rpm:exists_check))) {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / libcurl / libcurl-devel / libcurl-minimal');\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:38:27", "description": "The remote AlmaLinux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the ALSA-2022:5245 advisory.\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-11-16T00:00:00", "type": "nessus", "title": "AlmaLinux 9 : curl (ALSA-2022:5245)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27782"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:alma:linux:curl", "p-cpe:/a:alma:linux:curl-minimal", "p-cpe:/a:alma:linux:libcurl", "p-cpe:/a:alma:linux:libcurl-devel", "p-cpe:/a:alma:linux:libcurl-minimal", "cpe:/o:alma:linux:9", "cpe:/o:alma:linux:9::appstream", "cpe:/o:alma:linux:9::baseos"], "id": "ALMA_LINUX_ALSA-2022-5245.NASL", "href": "https://www.tenable.com/plugins/nessus/167710", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n#\n# The package checks in this plugin were extracted from\n# AlmaLinux Security Advisory ALSA-2022:5245.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(167710);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27776\",\n \"CVE-2022-27782\"\n );\n script_xref(name:\"ALSA\", value:\"2022:5245\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"AlmaLinux 9 : curl (ALSA-2022:5245)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote AlmaLinux host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote AlmaLinux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the\nALSA-2022:5245 advisory.\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://errata.almalinux.org/9/ALSA-2022-5245.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n script_cwe_id(287, 522);\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/07/01\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/01\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/11/16\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:curl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:libcurl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:alma:linux:9\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:alma:linux:9::appstream\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:alma:linux:9::baseos\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Alma Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AlmaLinux/release\", \"Host/AlmaLinux/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nvar os_release = get_kb_item('Host/AlmaLinux/release');\nif (isnull(os_release) || 'AlmaLinux' >!< os_release) audit(AUDIT_OS_NOT, 'AlmaLinux');\nvar os_ver = pregmatch(pattern: \"AlmaLinux release ([0-9]+(\\.[0-9]+)?)\", string:os_release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'AlmaLinux');\nos_ver = os_ver[1];\nif (! preg(pattern:\"^9([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'AlmaLinux 9.x', 'AlmaLinux ' + os_ver);\n\nif (!get_kb_item('Host/AlmaLinux/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'AlmaLinux', cpu);\n\nvar pkgs = [\n {'reference':'curl-7.76.1-14.el9_0.4', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.76.1-14.el9_0.4', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.76.1-14.el9_0.4', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.76.1-14.el9_0.4', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.76.1-14.el9_0.4', 'release':'9', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var _release = NULL;\n var sp = NULL;\n var _cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) _release = 'Alma-' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) _cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && _release && (!exists_check || rpm_exists(release:_release, rpm:exists_check))) {\n if (rpm_check(release:_release, sp:sp, cpu:_cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / curl-minimal / libcurl / libcurl-devel / libcurl-minimal');\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-03-16T02:38:40", "description": "The remote SUSE Linux SLES12 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2022:1680-1 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-05-17T00:00:00", "type": "nessus", "title": "SUSE SLES12 Security Update : curl (SUSE-SU-2022:1680-1)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27776"], "modified": "2023-03-10T00:00:00", "cpe": ["cpe:2.3:o:novell:suse_linux:12:*:*:*:*:*:*:*", "p-cpe:2.3:a:novell:suse_linux:curl:*:*:*:*:*:*:*", "p-cpe:2.3:a:novell:suse_linux:libcurl4:*:*:*:*:*:*:*", "p-cpe:2.3:a:novell:suse_linux:libcurl-devel:*:*:*:*:*:*:*", "p-cpe:2.3:a:novell:suse_linux:libcurl4-32bit:*:*:*:*:*:*:*"], "id": "SUSE_SU-2022-1680-1.NASL", "href": "https://www.tenable.com/plugins/nessus/161228", "sourceData": "##\n# (C) Tenable, Inc.\n#\n# The package checks in this plugin were extracted from\n# SUSE update advisory SUSE-SU-2022:1680-1. The text itself\n# is copyright (C) SUSE.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(161228);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/03/10\");\n\n script_cve_id(\"CVE-2022-22576\", \"CVE-2022-27776\");\n script_xref(name:\"SuSE\", value:\"SUSE-SU-2022:1680-1\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"SUSE SLES12 Security Update : curl (SUSE-SU-2022:1680-1)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote SUSE host is missing one or more security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote SUSE Linux SLES12 host has packages installed that are affected by multiple vulnerabilities as referenced in\nthe SUSE-SU-2022:1680-1 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1198614\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.suse.com/1198766\");\n # https://lists.suse.com/pipermail/sle-security-updates/2022-May/011020.html\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?377bea27\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2022-22576\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.suse.com/security/cve/CVE-2022-27776\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl, libcurl-devel, libcurl4 and / or libcurl4-32bit packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/05/16\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/05/17\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libcurl4\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:novell:suse_linux:libcurl4-32bit\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:novell:suse_linux:12\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"SuSE Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022-2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/SuSE/release\", \"Host/SuSE/rpm-list\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nvar os_release = get_kb_item(\"Host/SuSE/release\");\nif (isnull(os_release) || os_release !~ \"^(SLED|SLES)\") audit(AUDIT_OS_NOT, \"SUSE\");\nvar os_ver = pregmatch(pattern: \"^(SLE(S|D)\\d+)\", string:os_release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'SUSE');\nos_ver = os_ver[1];\nif (! preg(pattern:\"^(SLES12)$\", string:os_ver)) audit(AUDIT_OS_NOT, 'SUSE SLES12', 'SUSE (' + os_ver + ')');\n\nif (!get_kb_item(\"Host/SuSE/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'SUSE (' + os_ver + ')', cpu);\n\nvar service_pack = get_kb_item(\"Host/SuSE/patchlevel\");\nif (isnull(service_pack)) service_pack = \"0\";\nif (os_ver == \"SLES12\" && (! preg(pattern:\"^(5)$\", string:service_pack))) audit(AUDIT_OS_NOT, \"SLES12 SP5\", os_ver + \" SP\" + service_pack);\n\nvar pkgs = [\n {'reference':'curl-7.60.0-11.37.1', 'sp':'5', 'release':'SLES12', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-12.5', 'sles-release-12.5']},\n {'reference':'libcurl-devel-7.60.0-11.37.1', 'sp':'5', 'release':'SLES12', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-12.5', 'sle-sdk-release-12.5', 'sles-release-12.5']},\n {'reference':'libcurl4-32bit-7.60.0-11.37.1', 'sp':'5', 'release':'SLES12', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-12.5', 'sles-release-12.5']},\n {'reference':'libcurl4-7.60.0-11.37.1', 'sp':'5', 'release':'SLES12', 'rpm_spec_vers_cmp':TRUE, 'exists_check':['SLES_SAP-release-12.5', 'sles-release-12.5']}\n];\n\nvar ltss_caveat_required = FALSE;\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var _release = NULL;\n var sp = NULL;\n var _cpu = NULL;\n var exists_check = NULL;\n var rpm_spec_vers_cmp = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) _release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) _cpu = package_array['cpu'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (reference && _release) {\n if (exists_check) {\n var check_flag = 0;\n foreach var check (exists_check) {\n if (!rpm_exists(release:_release, rpm:check)) continue;\n check_flag++;\n }\n if (!check_flag) continue;\n }\n if (rpm_check(release:_release, sp:sp, cpu:_cpu, reference:reference, rpm_spec_vers_cmp:rpm_spec_vers_cmp)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / libcurl-devel / libcurl4 / libcurl4-32bit');\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:42:03", "description": "The version of HCL BigFix Client installed on the remote host is affected by multiple vulnerabilities, including the following:\n\n - An improper authentication vulnerability exists in the curl subcomponent which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An information disclosure vulnerability exists in the curl subcomponent. Using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed the curl subcomponent might leak authentication or cookie header data on HTTP redirects to the same host but another port number.\n (CVE-2022-27776)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-12-15T00:00:00", "type": "nessus", "title": "HCL BigFix Multiple Vulnerabilities (KB0098998)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27544", "CVE-2022-27545", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-12-16T00:00:00", "cpe": ["cpe:2.3:a:ibm:tivoli_endpoint_manager:*:*:*:*:*:*:*:*", "cpe:2.3:a:ibm:bigfix_platform:*:*:*:*:*:*:*:*", "cpe:2.3:a:hcltech:bigfix_platform:*:*:*:*:*:*:*:*", "cpe:2.3:a:ibm:endpoint_manager:*:*:*:*:*:*:*:*"], "id": "HCL_BIGFIX_CLIENT_KB0098998.NASL", "href": "https://www.tenable.com/plugins/nessus/168825", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(168825);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/16\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27544\",\n \"CVE-2022-27545\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0514\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"HCL BigFix Multiple Vulnerabilities (KB0098998)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"HCL BigFix is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The version of HCL BigFix Client installed on the remote host is affected by multiple vulnerabilities, including the\nfollowing:\n\n - An improper authentication vulnerability exists in the curl subcomponent which might allow reuse\n OAUTH2-authenticated connections without properly making sure that the connection was authenticated with\n the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S),\n POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An information disclosure vulnerability exists in the curl subcomponent. Using an IPv6 address that was in\n the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed the curl subcomponent might leak\n authentication or cookie header data on HTTP redirects to the same host but another port number.\n (CVE-2022-27776)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n # https://support.hcltechsw.com/csm?id=kb_article&sysparm_article=KB0098998\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?1447ec9c\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade to HCL BigFix Platfomr version 9.5.20, 10.0.7, or later.\");\n script_set_attribute(attribute:\"agent\", value:\"all\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/07/15\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/12/15\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/a:hcltech:bigfix_platform\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/a:ibm:bigfix_platform\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/a:ibm:endpoint_manager\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/a:ibm:tivoli_endpoint_manager\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_set_attribute(attribute:\"thorough_tests\", value:\"true\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Misc.\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"hcl_bigfix_client_nix_installed.nbin\", \"hcl_bigfix_client_mac_installed.nbin\");\n script_require_keys(\"installed_sw/HCL BigFix Client\");\n\n exit(0);\n}\n\ninclude('vcf.inc');\n\nvar app_info = vcf::get_app_info(app:'HCL BigFix Client');\n\nvar constraints = [\n {'min_version' : '9.5', 'fixed_version' : '9.5.20'},\n {'min_version' : '10.0', 'fixed_version' : '10.0.7'}\n];\n\nvcf::check_version_and_report(app_info:app_info, constraints:constraints, severity:SECURITY_WARNING);\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:29:43", "description": "It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2022-2022-065 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl's cookie engine can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain. (CVE-2022-27779)\n\n - The curl URL parser wrongly accepts percent-encoded URL separators like '/'when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.\n (CVE-2022-27780)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear- text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around\n - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.\n (CVE-2022-30115)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-09-06T00:00:00", "type": "nessus", "title": "Amazon Linux 2022 : (ALAS2022-2022-065)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-27779", "CVE-2022-27780", "CVE-2022-27782", "CVE-2022-30115"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:amazon:linux:curl", "p-cpe:/a:amazon:linux:curl-debuginfo", "p-cpe:/a:amazon:linux:curl-debugsource", "p-cpe:/a:amazon:linux:curl-minimal", "p-cpe:/a:amazon:linux:curl-minimal-debuginfo", "p-cpe:/a:amazon:linux:libcurl", "p-cpe:/a:amazon:linux:libcurl-debuginfo", "p-cpe:/a:amazon:linux:libcurl-devel", "p-cpe:/a:amazon:linux:libcurl-minimal", "p-cpe:/a:amazon:linux:libcurl-minimal-debuginfo", "cpe:/o:amazon:linux:2022"], "id": "AL2022_ALAS2022-2022-065.NASL", "href": "https://www.tenable.com/plugins/nessus/164745", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Amazon Linux 2022 Security Advisory ALAS2022-2022-065.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(164745);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\",\n \"CVE-2022-27779\",\n \"CVE-2022-27780\",\n \"CVE-2022-27782\",\n \"CVE-2022-30115\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Amazon Linux 2022 : (ALAS2022-2022-065)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Amazon Linux 2022 host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2022-2022-065 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a\n trailing dot.curl can be told to receive and send cookies. curl's cookie engine can bebuilt with or\n without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more\n rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if\n thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would\n get sent to adifferent and unrelated site or domain. (CVE-2022-27779)\n\n - The curl URL parser wrongly accepts percent-encoded URL separators like '/'when decoding the host name\n part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For\n example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed\n into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.\n (CVE-2022-27780)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-\n text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in\n the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around\n - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.\n (CVE-2022-30115)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/AL2022/ALAS-2022-065.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-22576.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27774.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27775.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27776.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27779.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27780.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27782.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-30115.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Run 'dnf update --releasever=2022.0.20220518 curl' to update your system.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/05/18\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/09/06\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-minimal-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-minimal-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:amazon:linux:2022\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Amazon Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AmazonLinux/release\", \"Host/AmazonLinux/rpm-list\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/AmazonLinux/release\");\nif (isnull(release) || !strlen(release)) audit(AUDIT_OS_NOT, \"Amazon Linux\");\nvar os_ver = pregmatch(pattern: \"^AL(A|\\d+|-\\d+)\", string:release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Amazon Linux\");\nvar os_ver = os_ver[1];\nif (os_ver != \"-2022\")\n{\n if (os_ver == 'A') os_ver = 'AMI';\n audit(AUDIT_OS_NOT, \"Amazon Linux 2022\", \"Amazon Linux \" + os_ver);\n}\n\nif (!get_kb_item(\"Host/AmazonLinux/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar pkgs = [\n {'reference':'curl-7.82.0-5.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.82.0-5.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.82.0-5.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.82.0-5.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.82.0-5.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.82.0-5.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.82.0-5.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.82.0-5.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.82.0-5.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.82.0-5.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.82.0-5.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.82.0-5.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.82.0-5.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.82.0-5.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.82.0-5.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.82.0-5.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.82.0-5.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.82.0-5.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.82.0-5.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.82.0-5.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.82.0-5.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.82.0-5.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.82.0-5.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.82.0-5.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.82.0-5.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.82.0-5.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.82.0-5.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.82.0-5.amzn2022', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.82.0-5.amzn2022', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.82.0-5.amzn2022', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var release = NULL;\n var sp = NULL;\n var cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && release && (!exists_check || rpm_exists(release:release, rpm:exists_check))) {\n if (rpm_check(release:release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl / curl-debuginfo / curl-debugsource / etc\");\n}", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-02-25T06:33:25", "description": "According to the versions of the curl packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - curl < 7.84.0 supports 'chained' HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable 'links' in this 'decompression chain' was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a 'malloc bomb', makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended. (CVE-2022-32207)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client. (CVE-2022-32208)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 9.8, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.9}, "published": "2022-09-23T00:00:00", "type": "nessus", "title": "EulerOS Virtualization 2.9.1 : curl (EulerOS-SA-2022-2341)", "bulletinFamily": "scanner", "cvss2": {"severity": "HIGH", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "baseScore": 7.5, "vectorString": "AV:N/AC:L/Au:N/C:P/I:P/A:P", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 6.4, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-27781", "CVE-2022-27782", "CVE-2022-32206", "CVE-2022-32207", "CVE-2022-32208"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:curl", "p-cpe:/a:huawei:euleros:libcurl", "cpe:/o:huawei:euleros:uvp:2.9.1"], "id": "EULEROS_SA-2022-2341.NASL", "href": "https://www.tenable.com/plugins/nessus/165381", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(165381);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\",\n \"CVE-2022-27781\",\n \"CVE-2022-27782\",\n \"CVE-2022-32206\",\n \"CVE-2022-32207\",\n \"CVE-2022-32208\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0255-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"EulerOS Virtualization 2.9.1 : curl (EulerOS-SA-2022-2341)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS Virtualization host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the curl packages installed, the EulerOS Virtualization installation on the remote host is\naffected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned\n about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl\n built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - curl < 7.84.0 supports 'chained' HTTP compression algorithms, meaning that a serverresponse can be\n compressed multiple times and potentially with different algorithms. The number of acceptable 'links' in\n this 'decompression chain' was unbounded, allowing a malicious server to insert a virtually unlimited\n number of compression steps.The use of such a decompression chain could result in a 'malloc bomb',\n makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of\n memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by\n finalizing the operation with a rename from a temporary name to the final target file name.In that rename\n operation, it might accidentally *widen* the permissions for the target file, leaving the updated file\n accessible to more users than intended. (CVE-2022-32207)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject\n data to the client. (CVE-2022-32208)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security\nadvisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional\nissues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2022-2341\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?1959bf2a\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-32207\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/09/23\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/09/23\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:uvp:2.9.1\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nvar uvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (uvp != \"2.9.1\") audit(AUDIT_OS_NOT, \"EulerOS Virtualization 2.9.1\");\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"aarch64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"aarch64\", cpu);\n\nvar flag = 0;\n\nvar pkgs = [\n \"curl-7.69.1-2.h15.eulerosv2r9\",\n \"libcurl-7.69.1-2.h15.eulerosv2r9\"\n];\n\nforeach (var pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_HOLE,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl\");\n}\n", "cvss": {"score": 7.5, "vector": "AV:N/AC:L/Au:N/C:P/I:P/A:P"}}, {"lastseen": "2023-01-10T19:31:30", "description": "According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - curl < 7.84.0 supports 'chained' HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable 'links' in this 'decompression chain' was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a 'malloc bomb', makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client. (CVE-2022-32208)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "NONE", "baseScore": 6.5, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N", "version": "3.1", "userInteraction": "REQUIRED"}, "impactScore": 3.6}, "published": "2022-10-09T00:00:00", "type": "nessus", "title": "EulerOS 2.0 SP8 : curl (EulerOS-SA-2022-2454)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.6, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.3, "vectorString": "AV:N/AC:M/Au:N/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27774", "CVE-2022-27776", "CVE-2022-32206", "CVE-2022-32208"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:curl", "p-cpe:/a:huawei:euleros:libcurl", "p-cpe:/a:huawei:euleros:libcurl-devel", "cpe:/o:huawei:euleros:2.0"], "id": "EULEROS_SA-2022-2454.NASL", "href": "https://www.tenable.com/plugins/nessus/165852", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(165852);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2022-27774\",\n \"CVE-2022-27776\",\n \"CVE-2022-32206\",\n \"CVE-2022-32208\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0255-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"EulerOS 2.0 SP8 : curl (EulerOS-SA-2022-2454)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the\nfollowing vulnerabilities :\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - curl < 7.84.0 supports 'chained' HTTP compression algorithms, meaning that a serverresponse can be\n compressed multiple times and potentially with different algorithms. The number of acceptable 'links' in\n this 'decompression chain' was unbounded, allowing a malicious server to insert a virtually unlimited\n number of compression steps.The use of such a decompression chain could result in a 'malloc bomb',\n makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of\n memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject\n data to the client. (CVE-2022-32208)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security\nadvisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional\nissues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2022-2454\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?ed807ab5\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:M/Au:N/C:P/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-32208\");\n script_set_attribute(attribute:\"cvss3_score_source\", value:\"CVE-2022-27776\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/10/09\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/10/09\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:2.0\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/sp\");\n script_exclude_keys(\"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nvar uvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (release !~ \"^EulerOS release 2\\.0(\\D|$)\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP8\");\n\nvar sp = get_kb_item(\"Host/EulerOS/sp\");\nif (isnull(sp) || sp !~ \"^(8)$\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP8\");\n\nif (!empty_or_null(uvp)) audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP8\", \"EulerOS UVP \" + uvp);\n\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"aarch64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"aarch64\", cpu);\n\nvar flag = 0;\n\nvar pkgs = [\n \"curl-7.61.1-2.h24.eulerosv2r8\",\n \"libcurl-7.61.1-2.h24.eulerosv2r8\",\n \"libcurl-devel-7.61.1-2.h24.eulerosv2r8\"\n];\n\nforeach (var pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", sp:\"8\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl\");\n}\n", "cvss": {"score": 4.3, "vector": "AV:N/AC:M/Au:N/C:P/I:N/A:N"}}, {"lastseen": "2023-01-10T19:41:40", "description": "The version of curl installed on the remote host is prior to 7.61.1-12.101. It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS-2022-1646 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable links in this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a malloc bomb, makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client. (CVE-2022-32208)\n\n - When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses.\n Effectively allowing asister site to deny service to all siblings. (CVE-2022-35252)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-12-10T00:00:00", "type": "nessus", "title": "Amazon Linux AMI : curl (ALAS-2022-1646)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27781", "CVE-2022-27782", "CVE-2022-32206", "CVE-2022-32208", "CVE-2022-35252"], "modified": "2022-12-29T00:00:00", "cpe": ["p-cpe:/a:amazon:linux:curl", "p-cpe:/a:amazon:linux:curl-debuginfo", "p-cpe:/a:amazon:linux:libcurl", "p-cpe:/a:amazon:linux:libcurl-devel", "cpe:/o:amazon:linux"], "id": "ALA_ALAS-2022-1646.NASL", "href": "https://www.tenable.com/plugins/nessus/168600", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Amazon Linux AMI Security Advisory ALAS-2022-1646.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(168600);\n script_version(\"1.4\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/29\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27776\",\n \"CVE-2022-27781\",\n \"CVE-2022-27782\",\n \"CVE-2022-32206\",\n \"CVE-2022-32208\",\n \"CVE-2022-35252\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0255-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0350-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Amazon Linux AMI : curl (ALAS-2022-1646)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Amazon Linux AMI host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"The version of curl installed on the remote host is prior to 7.61.1-12.101. It is, therefore, affected by multiple\nvulnerabilities as referenced in the ALAS-2022-1646 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned\n about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl\n built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be\n compressed multiple times and potentially with different algorithms. The number of acceptable links in\n this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited\n number of compression steps.The use of such a decompression chain could result in a malloc bomb,\n makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of\n memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject\n data to the client. (CVE-2022-32208)\n\n - When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control\n codes that when later are sent back to a HTTPserver might make the server return 400 responses.\n Effectively allowing asister site to deny service to all siblings. (CVE-2022-35252)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/ALAS-2022-1646.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-22576.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27774.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27776.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27781.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27782.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-32206.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-32208.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-35252.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Run 'yum update curl' to update your system.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/12/01\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/12/10\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:amazon:linux\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Amazon Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AmazonLinux/release\", \"Host/AmazonLinux/rpm-list\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar alas_release = get_kb_item(\"Host/AmazonLinux/release\");\nif (isnull(alas_release) || !strlen(alas_release)) audit(AUDIT_OS_NOT, \"Amazon Linux\");\nvar os_ver = pregmatch(pattern: \"^AL(A|\\d+|-\\d+)\", string:alas_release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Amazon Linux\");\nos_ver = os_ver[1];\nif (os_ver != \"A\")\n{\n if (os_ver == 'A') os_ver = 'AMI';\n audit(AUDIT_OS_NOT, \"Amazon Linux AMI\", \"Amazon Linux \" + os_ver);\n}\n\nif (!get_kb_item(\"Host/AmazonLinux/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar pkgs = [\n {'reference':'curl-7.61.1-12.101.amzn1', 'cpu':'i686', 'release':'ALA', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.61.1-12.101.amzn1', 'cpu':'x86_64', 'release':'ALA', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.61.1-12.101.amzn1', 'cpu':'i686', 'release':'ALA', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.61.1-12.101.amzn1', 'cpu':'x86_64', 'release':'ALA', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-12.101.amzn1', 'cpu':'i686', 'release':'ALA', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.61.1-12.101.amzn1', 'cpu':'x86_64', 'release':'ALA', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-12.101.amzn1', 'cpu':'i686', 'release':'ALA', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.61.1-12.101.amzn1', 'cpu':'x86_64', 'release':'ALA', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var _release = NULL;\n var sp = NULL;\n var _cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) _release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) _cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && _release && (!exists_check || rpm_exists(release:_release, rpm:exists_check))) {\n if (rpm_check(release:_release, sp:sp, cpu:_cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl / curl-debuginfo / libcurl / etc\");\n}", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-02-25T12:49:36", "description": "It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2022-2022-206 advisory.\n\n - A malicious server can serve excessive amounts of `Set-Cookie:` headers in a HTTP response to curl and curl < 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven't expired. Due to cookie matching rules, a server on `foo.example.com` can set cookies that also would match for `bar.example.com`, making it it possible for a sister server to effectively cause a denial of service for a sibling site on the same second level domain using this method. (CVE-2022-32205)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable links in this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a malloc bomb, makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended. (CVE-2022-32207)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client. (CVE-2022-32208)\n\n - When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses.\n Effectively allowing asister site to deny service to all siblings. (CVE-2022-35252)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 9.8, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.9}, "published": "2022-11-04T00:00:00", "type": "nessus", "title": "Amazon Linux 2022 : (ALAS2022-2022-206)", "bulletinFamily": "scanner", "cvss2": {"severity": "HIGH", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "baseScore": 7.5, "vectorString": "AV:N/AC:L/Au:N/C:P/I:P/A:P", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 6.4, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-27779", "CVE-2022-27780", "CVE-2022-27782", "CVE-2022-30115", "CVE-2022-32205", "CVE-2022-32206", "CVE-2022-32207", "CVE-2022-32208", "CVE-2022-35252"], "modified": "2022-12-07T00:00:00", "cpe": ["p-cpe:/a:amazon:linux:curl", "p-cpe:/a:amazon:linux:curl-debuginfo", "p-cpe:/a:amazon:linux:curl-debugsource", "p-cpe:/a:amazon:linux:curl-minimal", "p-cpe:/a:amazon:linux:curl-minimal-debuginfo", "p-cpe:/a:amazon:linux:libcurl", "p-cpe:/a:amazon:linux:libcurl-debuginfo", "p-cpe:/a:amazon:linux:libcurl-devel", "p-cpe:/a:amazon:linux:libcurl-minimal", "p-cpe:/a:amazon:linux:libcurl-minimal-debuginfo", "cpe:/o:amazon:linux:2022"], "id": "AL2022_ALAS2022-2022-206.NASL", "href": "https://www.tenable.com/plugins/nessus/167007", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Amazon Linux 2022 Security Advisory ALAS2022-2022-206.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(167007);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/07\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\",\n \"CVE-2022-27779\",\n \"CVE-2022-27780\",\n \"CVE-2022-27782\",\n \"CVE-2022-30115\",\n \"CVE-2022-32205\",\n \"CVE-2022-32206\",\n \"CVE-2022-32207\",\n \"CVE-2022-32208\",\n \"CVE-2022-35252\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0350-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0255-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Amazon Linux 2022 : (ALAS2022-2022-206)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Amazon Linux 2022 host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2022-2022-206 advisory.\n\n - A malicious server can serve excessive amounts of `Set-Cookie:` headers in a HTTP response to curl and\n curl < 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP\n requests to this, or other servers to which the cookies match, create requests that become larger than the\n threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead\n returns an error.This denial state might remain for as long as the same cookies are kept, match and\n haven't expired. Due to cookie matching rules, a server on `foo.example.com` can set cookies that also\n would match for `bar.example.com`, making it it possible for a sister server to effectively cause a\n denial of service for a sibling site on the same second level domain using this method. (CVE-2022-32205)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be\n compressed multiple times and potentially with different algorithms. The number of acceptable links in\n this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited\n number of compression steps.The use of such a decompression chain could result in a malloc bomb,\n makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of\n memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by\n finalizing the operation with a rename from a temporary name to the final target file name.In that rename\n operation, it might accidentally *widen* the permissions for the target file, leaving the updated file\n accessible to more users than intended. (CVE-2022-32207)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject\n data to the client. (CVE-2022-32208)\n\n - When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control\n codes that when later are sent back to a HTTPserver might make the server return 400 responses.\n Effectively allowing asister site to deny service to all siblings. (CVE-2022-35252)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/AL2022/ALAS-2022-206.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-32205.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-32206.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-32207.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-32208.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-35252.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Run 'dnf update curl --releasever=2022.0.20221102' to update your system.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-32207\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/06/27\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/11/01\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/11/04\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-minimal-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-minimal-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:amazon:linux:2022\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Amazon Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AmazonLinux/release\", \"Host/AmazonLinux/rpm-list\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar alas_release = get_kb_item(\"Host/AmazonLinux/release\");\nif (isnull(alas_release) || !strlen(alas_release)) audit(AUDIT_OS_NOT, \"Amazon Linux\");\nvar os_ver = pregmatch(pattern: \"^AL(A|\\d+|-\\d+)\", string:alas_release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Amazon Linux\");\nos_ver = os_ver[1];\nif (os_ver != \"-2022\")\n{\n if (os_ver == 'A') os_ver = 'AMI';\n audit(AUDIT_OS_NOT, \"Amazon Linux 2022\", \"Amazon Linux \" + os_ver);\n}\n\nif (!get_kb_item(\"Host/AmazonLinux/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar pkgs = [\n {'reference':'curl-7.85.0-1.amzn2022.0.1', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.85.0-1.amzn2022.0.1', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.85.0-1.amzn2022.0.1', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.85.0-1.amzn2022.0.1', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.85.0-1.amzn2022.0.1', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.85.0-1.amzn2022.0.1', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.85.0-1.amzn2022.0.1', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.85.0-1.amzn2022.0.1', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.85.0-1.amzn2022.0.1', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.85.0-1.amzn2022.0.1', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.85.0-1.amzn2022.0.1', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.85.0-1.amzn2022.0.1', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.85.0-1.amzn2022.0.1', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.85.0-1.amzn2022.0.1', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.85.0-1.amzn2022.0.1', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.85.0-1.amzn2022.0.1', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.85.0-1.amzn2022.0.1', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.85.0-1.amzn2022.0.1', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'aarch64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'i686', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.85.0-1.amzn2022.0.1', 'cpu':'x86_64', 'release':'AL-2022', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var _release = NULL;\n var sp = NULL;\n var _cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) _release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) _cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && _release && (!exists_check || rpm_exists(release:_release, rpm:exists_check))) {\n if (rpm_check(release:_release, sp:sp, cpu:_cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_HOLE,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl / curl-debuginfo / curl-debugsource / etc\");\n}", "cvss": {"score": 7.5, "vector": "AV:N/AC:L/Au:N/C:P/I:P/A:P"}}, {"lastseen": "2023-02-03T10:54:03", "description": "The remote Redhat Enterprise Linux 9 host has packages installed that are affected by a vulnerability as referenced in the RHSA-2022:8299 advisory.\n\n - curl: bad local IPv6 connection reuse (CVE-2022-27775)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "NONE", "baseScore": 7.5, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 3.6}, "published": "2022-11-16T00:00:00", "type": "nessus", "title": "RHEL 9 : curl (RHSA-2022:8299)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.0, "vectorString": "AV:N/AC:L/Au:N/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27775"], "modified": "2023-02-02T00:00:00", "cpe": ["cpe:/o:redhat:enterprise_linux:9", "p-cpe:/a:redhat:enterprise_linux:curl", "p-cpe:/a:redhat:enterprise_linux:curl-minimal", "p-cpe:/a:redhat:enterprise_linux:libcurl", "p-cpe:/a:redhat:enterprise_linux:libcurl-devel", "p-cpe:/a:redhat:enterprise_linux:libcurl-minimal"], "id": "REDHAT-RHSA-2022-8299.NASL", "href": "https://www.tenable.com/plugins/nessus/167609", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Red Hat Security Advisory RHSA-2022:8299. The text\n# itself is copyright (C) Red Hat, Inc.\n##\n\ninclude('deprecated_nasl_level.inc');\ninclude('compat.inc');\n\nif (description)\n{\n script_id(167609);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/02/02\");\n\n script_cve_id(\"CVE-2022-27775\");\n script_xref(name:\"RHSA\", value:\"2022:8299\");\n\n script_name(english:\"RHEL 9 : curl (RHSA-2022:8299)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Red Hat host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Redhat Enterprise Linux 9 host has packages installed that are affected by a vulnerability as referenced in\nthe RHSA-2022:8299 advisory.\n\n - curl: bad local IPv6 connection reuse (CVE-2022-27775)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/security/cve/CVE-2022-27775\");\n script_set_attribute(attribute:\"see_also\", value:\"https://access.redhat.com/errata/RHSA-2022:8299\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugzilla.redhat.com/2078388\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:N/C:P/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-27775\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n script_cwe_id(200);\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/11/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/11/16\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:redhat:enterprise_linux:9\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:curl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:redhat:enterprise_linux:libcurl-minimal\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Red Hat Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022-2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\", \"redhat_repos.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\ninclude('rhel.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nvar os_release = get_kb_item('Host/RedHat/release');\nif (isnull(os_release) || 'Red Hat' >!< os_release) audit(AUDIT_OS_NOT, 'Red Hat');\nvar os_ver = pregmatch(pattern: \"Red Hat Enterprise Linux.*release ([0-9]+(\\.[0-9]+)?)\", string:os_release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Red Hat');\nos_ver = os_ver[1];\nif (!rhel_check_release(operator: 'ge', os_version: os_ver, rhel_version: '9')) audit(AUDIT_OS_NOT, 'Red Hat 9.x', 'Red Hat ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Red Hat', cpu);\n\nvar constraints = [\n {\n 'repo_relative_urls': [\n 'content/dist/rhel9/9/aarch64/appstream/debug',\n 'content/dist/rhel9/9/aarch64/appstream/os',\n 'content/dist/rhel9/9/aarch64/appstream/source/SRPMS',\n 'content/dist/rhel9/9/aarch64/baseos/debug',\n 'content/dist/rhel9/9/aarch64/baseos/os',\n 'content/dist/rhel9/9/aarch64/baseos/source/SRPMS',\n 'content/dist/rhel9/9/aarch64/codeready-builder/debug',\n 'content/dist/rhel9/9/aarch64/codeready-builder/os',\n 'content/dist/rhel9/9/aarch64/codeready-builder/source/SRPMS',\n 'content/dist/rhel9/9/aarch64/highavailability/debug',\n 'content/dist/rhel9/9/aarch64/highavailability/os',\n 'content/dist/rhel9/9/aarch64/highavailability/source/SRPMS',\n 'content/dist/rhel9/9/aarch64/supplementary/debug',\n 'content/dist/rhel9/9/aarch64/supplementary/os',\n 'content/dist/rhel9/9/aarch64/supplementary/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/appstream/debug',\n 'content/dist/rhel9/9/ppc64le/appstream/os',\n 'content/dist/rhel9/9/ppc64le/appstream/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/baseos/debug',\n 'content/dist/rhel9/9/ppc64le/baseos/os',\n 'content/dist/rhel9/9/ppc64le/baseos/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/codeready-builder/debug',\n 'content/dist/rhel9/9/ppc64le/codeready-builder/os',\n 'content/dist/rhel9/9/ppc64le/codeready-builder/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/highavailability/debug',\n 'content/dist/rhel9/9/ppc64le/highavailability/os',\n 'content/dist/rhel9/9/ppc64le/highavailability/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/resilientstorage/debug',\n 'content/dist/rhel9/9/ppc64le/resilientstorage/os',\n 'content/dist/rhel9/9/ppc64le/resilientstorage/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/sap-solutions/debug',\n 'content/dist/rhel9/9/ppc64le/sap-solutions/os',\n 'content/dist/rhel9/9/ppc64le/sap-solutions/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/sap/debug',\n 'content/dist/rhel9/9/ppc64le/sap/os',\n 'content/dist/rhel9/9/ppc64le/sap/source/SRPMS',\n 'content/dist/rhel9/9/ppc64le/supplementary/debug',\n 'content/dist/rhel9/9/ppc64le/supplementary/os',\n 'content/dist/rhel9/9/ppc64le/supplementary/source/SRPMS',\n 'content/dist/rhel9/9/s390x/appstream/debug',\n 'content/dist/rhel9/9/s390x/appstream/os',\n 'content/dist/rhel9/9/s390x/appstream/source/SRPMS',\n 'content/dist/rhel9/9/s390x/baseos/debug',\n 'content/dist/rhel9/9/s390x/baseos/os',\n 'content/dist/rhel9/9/s390x/baseos/source/SRPMS',\n 'content/dist/rhel9/9/s390x/codeready-builder/debug',\n 'content/dist/rhel9/9/s390x/codeready-builder/os',\n 'content/dist/rhel9/9/s390x/codeready-builder/source/SRPMS',\n 'content/dist/rhel9/9/s390x/highavailability/debug',\n 'content/dist/rhel9/9/s390x/highavailability/os',\n 'content/dist/rhel9/9/s390x/highavailability/source/SRPMS',\n 'content/dist/rhel9/9/s390x/resilientstorage/debug',\n 'content/dist/rhel9/9/s390x/resilientstorage/os',\n 'content/dist/rhel9/9/s390x/resilientstorage/source/SRPMS',\n 'content/dist/rhel9/9/s390x/sap/debug',\n 'content/dist/rhel9/9/s390x/sap/os',\n 'content/dist/rhel9/9/s390x/sap/source/SRPMS',\n 'content/dist/rhel9/9/s390x/supplementary/debug',\n 'content/dist/rhel9/9/s390x/supplementary/os',\n 'content/dist/rhel9/9/s390x/supplementary/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/appstream/debug',\n 'content/dist/rhel9/9/x86_64/appstream/os',\n 'content/dist/rhel9/9/x86_64/appstream/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/baseos/debug',\n 'content/dist/rhel9/9/x86_64/baseos/os',\n 'content/dist/rhel9/9/x86_64/baseos/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/codeready-builder/debug',\n 'content/dist/rhel9/9/x86_64/codeready-builder/os',\n 'content/dist/rhel9/9/x86_64/codeready-builder/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/highavailability/debug',\n 'content/dist/rhel9/9/x86_64/highavailability/os',\n 'content/dist/rhel9/9/x86_64/highavailability/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/nfv/debug',\n 'content/dist/rhel9/9/x86_64/nfv/os',\n 'content/dist/rhel9/9/x86_64/nfv/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/resilientstorage/debug',\n 'content/dist/rhel9/9/x86_64/resilientstorage/os',\n 'content/dist/rhel9/9/x86_64/resilientstorage/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/rt/debug',\n 'content/dist/rhel9/9/x86_64/rt/os',\n 'content/dist/rhel9/9/x86_64/rt/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/sap-solutions/debug',\n 'content/dist/rhel9/9/x86_64/sap-solutions/os',\n 'content/dist/rhel9/9/x86_64/sap-solutions/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/sap/debug',\n 'content/dist/rhel9/9/x86_64/sap/os',\n 'content/dist/rhel9/9/x86_64/sap/source/SRPMS',\n 'content/dist/rhel9/9/x86_64/supplementary/debug',\n 'content/dist/rhel9/9/x86_64/supplementary/os',\n 'content/dist/rhel9/9/x86_64/supplementary/source/SRPMS'\n ],\n 'pkgs': [\n {'reference':'curl-7.76.1-19.el9', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.76.1-19.el9', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.76.1-19.el9', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.76.1-19.el9', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.76.1-19.el9', 'release':'9', 'rpm_spec_vers_cmp':TRUE}\n ]\n }\n];\n\nvar applicable_repo_urls = rhel_determine_applicable_repository_urls(constraints:constraints);\nif(applicable_repo_urls == RHEL_REPOS_NO_OVERLAP_MESSAGE) exit(0, RHEL_REPO_NOT_ENABLED);\n\nvar flag = 0;\nforeach var constraint_array ( constraints ) {\n var repo_relative_urls = NULL;\n if (!empty_or_null(constraint_array['repo_relative_urls'])) repo_relative_urls = constraint_array['repo_relative_urls'];\n foreach var pkg ( constraint_array['pkgs'] ) {\n var reference = NULL;\n var _release = NULL;\n var sp = NULL;\n var _cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(pkg['reference'])) reference = pkg['reference'];\n if (!empty_or_null(pkg['release'])) _release = 'RHEL' + pkg['release'];\n if (!empty_or_null(pkg['sp'])) sp = pkg['sp'];\n if (!empty_or_null(pkg['cpu'])) _cpu = pkg['cpu'];\n if (!empty_or_null(pkg['el_string'])) el_string = pkg['el_string'];\n if (!empty_or_null(pkg['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = pkg['rpm_spec_vers_cmp'];\n if (!empty_or_null(pkg['epoch'])) epoch = pkg['epoch'];\n if (!empty_or_null(pkg['allowmaj'])) allowmaj = pkg['allowmaj'];\n if (!empty_or_null(pkg['exists_check'])) exists_check = pkg['exists_check'];\n if (reference &&\n _release &&\n rhel_decide_repo_relative_url_check(required_repo_url_list:repo_relative_urls) &&\n (applicable_repo_urls || (!exists_check || rpm_exists(release:_release, rpm:exists_check))) &&\n rpm_check(release:_release, sp:sp, cpu:_cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n var extra = NULL;\n if (empty_or_null(applicable_repo_urls)) extra = rpm_report_get() + redhat_report_repo_caveat();\n else extra = rpm_report_get() + redhat_report_package_caveat();\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : extra\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / curl-minimal / libcurl / libcurl-devel / libcurl-minimal');\n}\n", "cvss": {"score": 5.0, "vector": "AV:N/AC:L/Au:N/C:P/I:N/A:N"}}, {"lastseen": "2023-01-10T19:40:00", "description": "The remote Oracle Linux 9 host has packages installed that are affected by a vulnerability as referenced in the ELSA-2022-8299 advisory.\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "NONE", "baseScore": 7.5, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 3.6}, "published": "2022-11-22T00:00:00", "type": "nessus", "title": "Oracle Linux 9 : curl (ELSA-2022-8299)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.0, "vectorString": "AV:N/AC:L/Au:N/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27775"], "modified": "2022-11-22T00:00:00", "cpe": ["cpe:/o:oracle:linux:9", "p-cpe:/a:oracle:linux:curl", "p-cpe:/a:oracle:linux:curl-minimal", "p-cpe:/a:oracle:linux:libcurl", "p-cpe:/a:oracle:linux:libcurl-devel", "p-cpe:/a:oracle:linux:libcurl-minimal"], "id": "ORACLELINUX_ELSA-2022-8299.NASL", "href": "https://www.tenable.com/plugins/nessus/168094", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Oracle Linux Security Advisory ELSA-2022-8299.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(168094);\n script_version(\"1.2\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/11/22\");\n\n script_cve_id(\"CVE-2022-27775\");\n\n script_name(english:\"Oracle Linux 9 : curl (ELSA-2022-8299)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Oracle Linux host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Oracle Linux 9 host has packages installed that are affected by a vulnerability as referenced in the\nELSA-2022-8299 advisory.\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://linux.oracle.com/errata/ELSA-2022-8299.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:N/C:P/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-27775\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/11/22\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/11/22\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:oracle:linux:9\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:curl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:oracle:linux:libcurl-minimal\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Oracle Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/OracleLinux\", \"Host/RedHat/release\", \"Host/RedHat/rpm-list\", \"Host/local_checks_enabled\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item('Host/OracleLinux')) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar os_release = get_kb_item(\"Host/RedHat/release\");\nif (isnull(os_release) || !pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux)\", string:os_release)) audit(AUDIT_OS_NOT, 'Oracle Linux');\nvar os_ver = pregmatch(pattern: \"Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\\.[0-9]+)?)\", string:os_release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'Oracle Linux');\nos_ver = os_ver[1];\nif (! preg(pattern:\"^9([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'Oracle Linux 9', 'Oracle Linux ' + os_ver);\n\nif (!get_kb_item('Host/RedHat/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Oracle Linux', cpu);\n\nvar pkgs = [\n {'reference':'curl-7.76.1-19.el9', 'cpu':'aarch64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.76.1-19.el9', 'cpu':'x86_64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.76.1-19.el9', 'cpu':'aarch64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.76.1-19.el9', 'cpu':'x86_64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.76.1-19.el9', 'cpu':'aarch64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.76.1-19.el9', 'cpu':'i686', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.76.1-19.el9', 'cpu':'x86_64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.76.1-19.el9', 'cpu':'aarch64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.76.1-19.el9', 'cpu':'i686', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.76.1-19.el9', 'cpu':'x86_64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.76.1-19.el9', 'cpu':'aarch64', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.76.1-19.el9', 'cpu':'i686', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.76.1-19.el9', 'cpu':'x86_64', 'release':'9', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var _release = NULL;\n var sp = NULL;\n var _cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) _release = 'EL' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) _cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && _release) {\n if (exists_check) {\n if (rpm_exists(release:_release, rpm:exists_check) && rpm_check(release:_release, sp:sp, cpu:cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n } else {\n if (rpm_check(release:_release, sp:sp, cpu:_cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / curl-minimal / libcurl / etc');\n}\n", "cvss": {"score": 5.0, "vector": "AV:N/AC:L/Au:N/C:P/I:N/A:N"}}, {"lastseen": "2023-01-10T19:38:59", "description": "The remote AlmaLinux 9 host has packages installed that are affected by a vulnerability as referenced in the ALSA-2022:8299 advisory.\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "NONE", "baseScore": 7.5, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 3.6}, "published": "2022-11-19T00:00:00", "type": "nessus", "title": "AlmaLinux 9 : curl (ALSA-2022:8299)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.0, "vectorString": "AV:N/AC:L/Au:N/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27775"], "modified": "2022-11-19T00:00:00", "cpe": ["p-cpe:/a:alma:linux:curl", "p-cpe:/a:alma:linux:curl-minimal", "p-cpe:/a:alma:linux:libcurl", "p-cpe:/a:alma:linux:libcurl-devel", "p-cpe:/a:alma:linux:libcurl-minimal", "cpe:/o:alma:linux:9", "cpe:/o:alma:linux:9::appstream", "cpe:/o:alma:linux:9::baseos"], "id": "ALMA_LINUX_ALSA-2022-8299.NASL", "href": "https://www.tenable.com/plugins/nessus/167978", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n#\n# The package checks in this plugin were extracted from\n# AlmaLinux Security Advisory ALSA-2022:8299.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(167978);\n script_version(\"1.2\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/11/19\");\n\n script_cve_id(\"CVE-2022-27775\");\n script_xref(name:\"ALSA\", value:\"2022:8299\");\n\n script_name(english:\"AlmaLinux 9 : curl (ALSA-2022:8299)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote AlmaLinux host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote AlmaLinux 9 host has packages installed that are affected by a vulnerability as referenced in the\nALSA-2022:8299 advisory.\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\nNote that Nessus has not tested for this issue but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://errata.almalinux.org/9/ALSA-2022-8299.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:N/C:P/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-27775\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n script_cwe_id(200);\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/11/15\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/11/19\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:curl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:alma:linux:libcurl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:alma:linux:9\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:alma:linux:9::appstream\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:alma:linux:9::baseos\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Alma Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AlmaLinux/release\", \"Host/AlmaLinux/rpm-list\", \"Host/cpu\");\n\n exit(0);\n}\n\n\ninclude('rpm.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nvar os_release = get_kb_item('Host/AlmaLinux/release');\nif (isnull(os_release) || 'AlmaLinux' >!< os_release) audit(AUDIT_OS_NOT, 'AlmaLinux');\nvar os_ver = pregmatch(pattern: \"AlmaLinux release ([0-9]+(\\.[0-9]+)?)\", string:os_release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, 'AlmaLinux');\nos_ver = os_ver[1];\nif (! preg(pattern:\"^9([^0-9]|$)\", string:os_ver)) audit(AUDIT_OS_NOT, 'AlmaLinux 9.x', 'AlmaLinux ' + os_ver);\n\nif (!get_kb_item('Host/AlmaLinux/rpm-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 's390' >!< cpu && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'AlmaLinux', cpu);\n\nvar pkgs = [\n {'reference':'curl-7.76.1-19.el9', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.76.1-19.el9', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.76.1-19.el9', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.76.1-19.el9', 'release':'9', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.76.1-19.el9', 'release':'9', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var _release = NULL;\n var sp = NULL;\n var _cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) _release = 'Alma-' + package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) _cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && _release && (!exists_check || rpm_exists(release:_release, rpm:exists_check))) {\n if (rpm_check(release:_release, sp:sp, cpu:_cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / curl-minimal / libcurl / libcurl-devel / libcurl-minimal');\n}\n", "cvss": {"score": 5.0, "vector": "AV:N/AC:L/Au:N/C:P/I:N/A:N"}}, {"lastseen": "2023-02-25T12:40:06", "description": "The remote Debian 11 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-5197 advisory.\n\n - curl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server, resulting in potentially revealing sensitive internal information to the server using a clear-text network protocol. (CVE-2021-22898)\n\n - libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse, if one of them matches the setup.Due to errors in the logic, the config matching function did not take 'issuercert' into account and it compared the involved paths *case insensitively*,which could lead to libcurl reusing wrong connections.File paths are, or can be, case sensitive on many systems but not all, and caneven vary depending on used file systems.The comparison also didn't include the 'issuer cert' which a transfer can setto qualify how to verify the server certificate. (CVE-2021-22924)\n\n - When sending data to an MQTT server, libcurl <= 7.73.0 and 7.78.0 could in some circumstances erroneously keep a pointer to an already freed memory area and both use that again in a subsequent call to send data and also free it *again*. (CVE-2021-22945)\n\n - A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations\n **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network. (CVE-2021-22946)\n\n - When curl >= 7.20.0 and <= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches.\n curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker's injected data comes from the TLS-protected server. (CVE-2021-22947)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - A malicious server can serve excessive amounts of `Set-Cookie:` headers in a HTTP response to curl and curl < 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven't expired. Due to cookie matching rules, a server on `foo.example.com` can set cookies that also would match for `bar.example.com`, making it it possible for a sister server to effectively cause a denial of service for a sibling site on the same second level domain using this method. (CVE-2022-32205)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable links in this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a malloc bomb, makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended. (CVE-2022-32207)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client. (CVE-2022-32208)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 9.8, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.9}, "published": "2022-08-02T00:00:00", "type": "nessus", "title": "Debian DSA-5197-1 : curl - security update", "bulletinFamily": "scanner", "cvss2": {"severity": "HIGH", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "baseScore": 7.5, "vectorString": "AV:N/AC:L/Au:N/C:P/I:P/A:P", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 6.4, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2021-22898", "CVE-2021-22924", "CVE-2021-22945", "CVE-2021-22946", "CVE-2021-22947", "CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-27781", "CVE-2022-27782", "CVE-2022-32205", "CVE-2022-32206", "CVE-2022-32207", "CVE-2022-32208"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:debian:debian_linux:curl", "p-cpe:/a:debian:debian_linux:libcurl3-gnutls", "p-cpe:/a:debian:debian_linux:libcurl3-nss", "p-cpe:/a:debian:debian_linux:libcurl4", "p-cpe:/a:debian:debian_linux:libcurl4-doc", "p-cpe:/a:debian:debian_linux:libcurl4-gnutls-dev", "p-cpe:/a:debian:debian_linux:libcurl4-nss-dev", "p-cpe:/a:debian:debian_linux:libcurl4-openssl-dev", "cpe:/o:debian:debian_linux:11.0"], "id": "DEBIAN_DSA-5197.NASL", "href": "https://www.tenable.com/plugins/nessus/163681", "sourceData": "#\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Debian Security Advisory dsa-5197. The text\n# itself is copyright (C) Software in the Public Interest, Inc.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(163681);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2021-22898\",\n \"CVE-2021-22924\",\n \"CVE-2021-22945\",\n \"CVE-2021-22946\",\n \"CVE-2021-22947\",\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\",\n \"CVE-2022-27781\",\n \"CVE-2022-27782\",\n \"CVE-2022-32205\",\n \"CVE-2022-32206\",\n \"CVE-2022-32207\",\n \"CVE-2022-32208\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0255-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Debian DSA-5197-1 : curl - security update\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Debian host is missing one or more security-related updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Debian 11 host has packages installed that are affected by multiple vulnerabilities as referenced in the\ndsa-5197 advisory.\n\n - curl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as\n `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a\n flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized\n data from a stack based buffer to the server, resulting in potentially revealing sensitive internal\n information to the server using a clear-text network protocol. (CVE-2021-22898)\n\n - libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse, if one of\n them matches the setup.Due to errors in the logic, the config matching function did not take 'issuercert'\n into account and it compared the involved paths *case insensitively*,which could lead to libcurl reusing\n wrong connections.File paths are, or can be, case sensitive on many systems but not all, and caneven vary\n depending on used file systems.The comparison also didn't include the 'issuer cert' which a transfer can\n setto qualify how to verify the server certificate. (CVE-2021-22924)\n\n - When sending data to an MQTT server, libcurl <= 7.73.0 and 7.78.0 could in some circumstances erroneously\n keep a pointer to an already freed memory area and both use that again in a subsequent call to send data\n and also free it *again*. (CVE-2021-22945)\n\n - A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an\n IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL`\n or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly\n crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations\n **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear\n text over the network. (CVE-2021-22946)\n\n - When curl >= 7.20.0 and <= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to\n upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches.\n curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using\n and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw,\n it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS\n traffic from the legitimate server and trick curl into sending data back to the user thinking the\n attacker's injected data comes from the TLS-protected server. (CVE-2021-22947)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned\n about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl\n built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - A malicious server can serve excessive amounts of `Set-Cookie:` headers in a HTTP response to curl and\n curl < 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP\n requests to this, or other servers to which the cookies match, create requests that become larger than the\n threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead\n returns an error.This denial state might remain for as long as the same cookies are kept, match and\n haven't expired. Due to cookie matching rules, a server on `foo.example.com` can set cookies that also\n would match for `bar.example.com`, making it it possible for a sister server to effectively cause a\n denial of service for a sibling site on the same second level domain using this method. (CVE-2022-32205)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be\n compressed multiple times and potentially with different algorithms. The number of acceptable links in\n this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited\n number of compression steps.The use of such a decompression chain could result in a malloc bomb,\n makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of\n memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by\n finalizing the operation with a rename from a temporary name to the final target file name.In that rename\n operation, it might accidentally *widen* the permissions for the target file, leaving the updated file\n accessible to more users than intended. (CVE-2022-32207)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject\n data to the client. (CVE-2022-32208)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=989228\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/source-package/curl\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.debian.org/security/2022/dsa-5197\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2021-22898\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2021-22924\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2021-22945\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2021-22946\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2021-22947\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-22576\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27774\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27775\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27776\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27781\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27782\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-32205\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-32206\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-32207\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-32208\");\n script_set_attribute(attribute:\"see_also\", value:\"https://packages.debian.org/source/bullseye/curl\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the curl packages.\n\nFor the stable distribution (bullseye), these problems have been fixed in version 7.74.0-1.3+deb11u2.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-32207\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2021/05/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/08/01\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/08/02\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl3-gnutls\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl3-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-gnutls-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-nss-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-openssl-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:debian:debian_linux:11.0\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Debian Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Debian/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\ninclude('debian_package.inc');\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/Debian/dpkg-l\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar release = get_kb_item('Host/Debian/release');\nif ( isnull(release) ) audit(AUDIT_OS_NOT, 'Debian');\nvar release = chomp(release);\nif (! preg(pattern:\"^(11)\\.[0-9]+\", string:release)) audit(AUDIT_OS_NOT, 'Debian 11.0', 'Debian ' + release);\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Debian', cpu);\n\nvar pkgs = [\n {'release': '11.0', 'prefix': 'curl', 'reference': '7.74.0-1.3+deb11u2'},\n {'release': '11.0', 'prefix': 'libcurl3-gnutls', 'reference': '7.74.0-1.3+deb11u2'},\n {'release': '11.0', 'prefix': 'libcurl3-nss', 'reference': '7.74.0-1.3+deb11u2'},\n {'release': '11.0', 'prefix': 'libcurl4', 'reference': '7.74.0-1.3+deb11u2'},\n {'release': '11.0', 'prefix': 'libcurl4-doc', 'reference': '7.74.0-1.3+deb11u2'},\n {'release': '11.0', 'prefix': 'libcurl4-gnutls-dev', 'reference': '7.74.0-1.3+deb11u2'},\n {'release': '11.0', 'prefix': 'libcurl4-nss-dev', 'reference': '7.74.0-1.3+deb11u2'},\n {'release': '11.0', 'prefix': 'libcurl4-openssl-dev', 'reference': '7.74.0-1.3+deb11u2'}\n];\n\nvar flag = 0;\nforeach package_array ( pkgs ) {\n var release = NULL;\n var prefix = NULL;\n var reference = NULL;\n if (!empty_or_null(package_array['release'])) release = package_array['release'];\n if (!empty_or_null(package_array['prefix'])) prefix = package_array['prefix'];\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (release && prefix && reference) {\n if (deb_check(release:release, prefix:prefix, reference:reference)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_HOLE,\n extra : deb_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = deb_pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / libcurl3-gnutls / libcurl3-nss / libcurl4 / libcurl4-doc / etc');\n}\n", "cvss": {"score": 7.5, "vector": "AV:N/AC:L/Au:N/C:P/I:P/A:P"}}, {"lastseen": "2023-03-27T19:25:07", "description": "It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2023-2023-083 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl's cookie engine can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain. (CVE-2022-27779)\n\n - The curl URL parser wrongly accepts percent-encoded URL separators like '/'when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.\n (CVE-2022-27780)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear- text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around\n - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.\n (CVE-2022-30115)\n\n - A malicious server can serve excessive amounts of `Set-Cookie:` headers in a HTTP response to curl and curl < 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven't expired. Due to cookie matching rules, a server on `foo.example.com` can set cookies that also would match for `bar.example.com`, making it it possible for a sister server to effectively cause a denial of service for a sibling site on the same second level domain using this method. (CVE-2022-32205)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable links in this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a malloc bomb, makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended. (CVE-2022-32207)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client. (CVE-2022-32208)\n\n - When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST. (CVE-2022-32221)\n\n - When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses.\n Effectively allowing asister site to deny service to all siblings. (CVE-2022-35252)\n\n - curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095 consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial- of-service. (CVE-2022-35260)\n\n - curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non- HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200 status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap, ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0. (CVE-2022-42915)\n\n - In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.).\n The earliest affected version is 7.77.0 2021-05-26. (CVE-2022-42916)\n\n - A vulnerability exists in curl <7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP.\n Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop (U+002E) `.`. Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded. (CVE-2022-43551)\n\n - A use after free vulnerability exists in curl <7.87.0. Curl can be asked to *tunnel* virtually all protocols it supports through an HTTP proxy. HTTP proxies can (and often do) deny such tunnel operations.\n When getting denied to tunnel the specific protocols SMB or TELNET, curl would use a heap-allocated struct after it had been freed, in its transfer shutdown code path. (CVE-2022-43552)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 9.8, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.9}, "published": "2023-03-21T00:00:00", "type": "nessus", "title": "Amazon Linux 2023 : curl, curl-minimal, libcurl (ALAS2023-2023-083)", "bulletinFamily": "scanner", "cvss2": {"severity": "HIGH", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "baseScore": 7.5, "vectorString": "AV:N/AC:L/Au:N/C:P/I:P/A:P", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 6.4, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-27779", "CVE-2022-27780", "CVE-2022-27782", "CVE-2022-30115", "CVE-2022-32205", "CVE-2022-32206", "CVE-2022-32207", "CVE-2022-32208", "CVE-2022-32221", "CVE-2022-35252", "CVE-2022-35260", "CVE-2022-42915", "CVE-2022-42916", "CVE-2022-43551", "CVE-2022-43552"], "modified": "2023-03-27T00:00:00", "cpe": ["p-cpe:/a:amazon:linux:curl", "p-cpe:/a:amazon:linux:curl-debuginfo", "p-cpe:/a:amazon:linux:curl-debugsource", "p-cpe:/a:amazon:linux:curl-minimal", "p-cpe:/a:amazon:linux:curl-minimal-debuginfo", "p-cpe:/a:amazon:linux:libcurl", "p-cpe:/a:amazon:linux:libcurl-debuginfo", "p-cpe:/a:amazon:linux:libcurl-devel", "p-cpe:/a:amazon:linux:libcurl-minimal", "p-cpe:/a:amazon:linux:libcurl-minimal-debuginfo", "cpe:/o:amazon:linux:2023"], "id": "AL2023_ALAS2023-2023-083.NASL", "href": "https://www.tenable.com/plugins/nessus/173171", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Amazon Linux 2023 Security Advisory ALAS2023-2023-083.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(173171);\n script_version(\"1.2\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/03/27\");\n\n script_cve_id(\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\",\n \"CVE-2022-27779\",\n \"CVE-2022-27780\",\n \"CVE-2022-27782\",\n \"CVE-2022-30115\",\n \"CVE-2022-32205\",\n \"CVE-2022-32206\",\n \"CVE-2022-32207\",\n \"CVE-2022-32208\",\n \"CVE-2022-32221\",\n \"CVE-2022-35252\",\n \"CVE-2022-35260\",\n \"CVE-2022-42915\",\n \"CVE-2022-42916\",\n \"CVE-2022-43551\",\n \"CVE-2022-43552\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0451-S\");\n script_xref(name:\"IAVA\", value:\"2023-A-0008-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0255-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0350-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Amazon Linux 2023 : curl, curl-minimal, libcurl (ALAS2023-2023-083)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Amazon Linux 2023 host is missing a security update.\");\n script_set_attribute(attribute:\"description\", value:\n\"It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2023-2023-083 advisory.\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a\n trailing dot.curl can be told to receive and send cookies. curl's cookie engine can bebuilt with or\n without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more\n rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if\n thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would\n get sent to adifferent and unrelated site or domain. (CVE-2022-27779)\n\n - The curl URL parser wrongly accepts percent-encoded URL separators like '/'when decoding the host name\n part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For\n example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed\n into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.\n (CVE-2022-27780)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-\n text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in\n the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around\n - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.\n (CVE-2022-30115)\n\n - A malicious server can serve excessive amounts of `Set-Cookie:` headers in a HTTP response to curl and\n curl < 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP\n requests to this, or other servers to which the cookies match, create requests that become larger than the\n threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead\n returns an error.This denial state might remain for as long as the same cookies are kept, match and\n haven't expired. Due to cookie matching rules, a server on `foo.example.com` can set cookies that also\n would match for `bar.example.com`, making it it possible for a sister server to effectively cause a\n denial of service for a sibling site on the same second level domain using this method. (CVE-2022-32205)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be\n compressed multiple times and potentially with different algorithms. The number of acceptable links in\n this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited\n number of compression steps.The use of such a decompression chain could result in a malloc bomb,\n makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of\n memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by\n finalizing the operation with a rename from a temporary name to the final target file name.In that rename\n operation, it might accidentally *widen* the permissions for the target file, leaving the updated file\n accessible to more users than intended. (CVE-2022-32207)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject\n data to the client. (CVE-2022-32208)\n\n - When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to\n ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle\n previously was used to issue a `PUT` request which used that callback. This flaw may surprise the\n application and cause it to misbehave and either send off the wrong data or use memory after free or\n similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is\n changed from a PUT to a POST. (CVE-2022-32221)\n\n - When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control\n codes that when later are sent back to a HTTPserver might make the server return 400 responses.\n Effectively allowing asister site to deny service to all siblings. (CVE-2022-35252)\n\n - curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095\n consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based\n buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a\n segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide\n a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial-\n of-service. (CVE-2022-35260)\n\n - curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non-\n HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and\n then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often\n only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200\n status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in\n curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap,\n ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0. (CVE-2022-42915)\n\n - In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS\n support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step)\n even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL\n uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using\n the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.).\n The earliest affected version is 7.77.0 2021-05-26. (CVE-2022-42916)\n\n - A vulnerability exists in curl <7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP.\n Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP\n step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name\n in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN\n conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full\n stop (U+002E) `.`. Then in a subsequent request, it does not detect the HSTS state and makes a clear text\n transfer. Because it would store the info IDN encoded but look for it IDN decoded. (CVE-2022-43551)\n\n - A use after free vulnerability exists in curl <7.87.0. Curl can be asked to *tunnel* virtually all\n protocols it supports through an HTTP proxy. HTTP proxies can (and often do) deny such tunnel operations.\n When getting denied to tunnel the specific protocols SMB or TELNET, curl would use a heap-allocated struct\n after it had been freed, in its transfer shutdown code path. (CVE-2022-43552)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/AL2023/ALAS-2023-083.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-22576.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27774.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27775.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27776.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27779.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27780.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-27782.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-30115.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-32205.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-32206.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-32207.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-32208.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-32221.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-35252.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-35260.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-42915.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-42916.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-43551.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/cve/html/CVE-2022-43552.html\");\n script_set_attribute(attribute:\"see_also\", value:\"https://alas.aws.amazon.com/faqs.html\");\n script_set_attribute(attribute:\"solution\", value:\n\"Run 'dnf update curl --releasever=2023.0.20230222 ' to update your system.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-32207\");\n script_set_attribute(attribute:\"cvss3_score_source\", value:\"CVE-2022-42915\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2023/02/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2023/03/21\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-debugsource\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:curl-minimal-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-minimal\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:amazon:linux:libcurl-minimal-debuginfo\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:amazon:linux:2023\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Amazon Linux Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/AmazonLinux/release\", \"Host/AmazonLinux/rpm-list\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar alas_release = get_kb_item(\"Host/AmazonLinux/release\");\nif (isnull(alas_release) || !strlen(alas_release)) audit(AUDIT_OS_NOT, \"Amazon Linux\");\nvar os_ver = pregmatch(pattern: \"^AL(A|\\d+|-\\d+)\", string:alas_release);\nif (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, \"Amazon Linux\");\nos_ver = os_ver[1];\nif (os_ver != \"-2023\")\n{\n if (os_ver == 'A') os_ver = 'AMI';\n audit(AUDIT_OS_NOT, \"Amazon Linux 2023\", \"Amazon Linux \" + os_ver);\n}\n\nif (!get_kb_item(\"Host/AmazonLinux/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar pkgs = [\n {'reference':'curl-7.87.0-2.amzn2023.0.2', 'cpu':'aarch64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.87.0-2.amzn2023.0.2', 'cpu':'i686', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-7.87.0-2.amzn2023.0.2', 'cpu':'x86_64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'aarch64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'i686', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'x86_64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.87.0-2.amzn2023.0.2', 'cpu':'aarch64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.87.0-2.amzn2023.0.2', 'cpu':'i686', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-debugsource-7.87.0-2.amzn2023.0.2', 'cpu':'x86_64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.87.0-2.amzn2023.0.2', 'cpu':'aarch64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.87.0-2.amzn2023.0.2', 'cpu':'i686', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-7.87.0-2.amzn2023.0.2', 'cpu':'x86_64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'aarch64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'i686', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'curl-minimal-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'x86_64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.87.0-2.amzn2023.0.2', 'cpu':'aarch64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.87.0-2.amzn2023.0.2', 'cpu':'i686', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-7.87.0-2.amzn2023.0.2', 'cpu':'x86_64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'aarch64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'i686', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'x86_64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.87.0-2.amzn2023.0.2', 'cpu':'aarch64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.87.0-2.amzn2023.0.2', 'cpu':'i686', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-devel-7.87.0-2.amzn2023.0.2', 'cpu':'x86_64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.87.0-2.amzn2023.0.2', 'cpu':'aarch64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.87.0-2.amzn2023.0.2', 'cpu':'i686', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-7.87.0-2.amzn2023.0.2', 'cpu':'x86_64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'aarch64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'i686', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE},\n {'reference':'libcurl-minimal-debuginfo-7.87.0-2.amzn2023.0.2', 'cpu':'x86_64', 'release':'AL-2023', 'rpm_spec_vers_cmp':TRUE}\n];\n\nvar flag = 0;\nforeach var package_array ( pkgs ) {\n var reference = NULL;\n var _release = NULL;\n var sp = NULL;\n var _cpu = NULL;\n var el_string = NULL;\n var rpm_spec_vers_cmp = NULL;\n var epoch = NULL;\n var allowmaj = NULL;\n var exists_check = NULL;\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (!empty_or_null(package_array['release'])) _release = package_array['release'];\n if (!empty_or_null(package_array['sp'])) sp = package_array['sp'];\n if (!empty_or_null(package_array['cpu'])) _cpu = package_array['cpu'];\n if (!empty_or_null(package_array['el_string'])) el_string = package_array['el_string'];\n if (!empty_or_null(package_array['rpm_spec_vers_cmp'])) rpm_spec_vers_cmp = package_array['rpm_spec_vers_cmp'];\n if (!empty_or_null(package_array['epoch'])) epoch = package_array['epoch'];\n if (!empty_or_null(package_array['allowmaj'])) allowmaj = package_array['allowmaj'];\n if (!empty_or_null(package_array['exists_check'])) exists_check = package_array['exists_check'];\n if (reference && _release && (!exists_check || rpm_exists(release:_release, rpm:exists_check))) {\n if (rpm_check(release:_release, sp:sp, cpu:_cpu, reference:reference, epoch:epoch, el_string:el_string, rpm_spec_vers_cmp:rpm_spec_vers_cmp, allowmaj:allowmaj)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_HOLE,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl / curl-debuginfo / curl-debugsource / etc\");\n}", "cvss": {"score": 7.5, "vector": "AV:N/AC:L/Au:N/C:P/I:P/A:P"}}, {"lastseen": "2023-03-10T02:55:37", "description": "The remote Debian 11 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-5365 advisory.\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An allocation of resources without limits or throttling vulnerability exists in curl <v7.88.0 based on the chained HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable links in this decompression chain wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a malloc bomb, making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors. (CVE-2023-23916)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "NONE", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "NONE", "privilegesRequired": "NONE", "baseScore": 7.5, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 3.6}, "published": "2023-03-01T00:00:00", "type": "nessus", "title": "Debian DSA-5365-1 : curl - security update", "bulletinFamily": "scanner", "cvss2": {"severity": "LOW", "exploitabilityScore": 6.8, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 3.5, "vectorString": "AV:N/AC:M/Au:S/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27774", "CVE-2023-23916"], "modified": "2023-03-01T00:00:00", "cpe": ["p-cpe:/a:debian:debian_linux:curl", "p-cpe:/a:debian:debian_linux:libcurl3-gnutls", "p-cpe:/a:debian:debian_linux:libcurl3-nss", "p-cpe:/a:debian:debian_linux:libcurl4", "p-cpe:/a:debian:debian_linux:libcurl4-doc", "p-cpe:/a:debian:debian_linux:libcurl4-gnutls-dev", "p-cpe:/a:debian:debian_linux:libcurl4-nss-dev", "p-cpe:/a:debian:debian_linux:libcurl4-openssl-dev", "cpe:/o:debian:debian_linux:11.0"], "id": "DEBIAN_DSA-5365.NASL", "href": "https://www.tenable.com/plugins/nessus/172027", "sourceData": "#%NASL_MIN_LEVEL 80900\n#\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Debian Security Advisory dsa-5365. The text\n# itself is copyright (C) Software in the Public Interest, Inc.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(172027);\n script_version(\"1.0\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/03/01\");\n\n script_cve_id(\"CVE-2022-27774\", \"CVE-2023-23916\");\n script_xref(name:\"IAVA\", value:\"2023-A-0008-S\");\n\n script_name(english:\"Debian DSA-5365-1 : curl - security update\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Debian host is missing one or more security-related updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Debian 11 host has packages installed that are affected by multiple vulnerabilities as referenced in the\ndsa-5365 advisory.\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An allocation of resources without limits or throttling vulnerability exists in curl <v7.88.0 based on the\n chained HTTP compression algorithms, meaning that a server response can be compressed multiple times and\n potentially with differentalgorithms. The number of acceptable links in this decompression chain\n wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a\n virtually unlimited number of compression steps simply byusing many headers. The use of such a\n decompression chain could result in a malloc bomb, making curl end up spending enormous amounts of\n allocated heap memory, or trying to and returning out of memory errors. (CVE-2023-23916)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/source-package/curl\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.debian.org/security/2023/dsa-5365\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27774\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2023-23916\");\n script_set_attribute(attribute:\"see_also\", value:\"https://packages.debian.org/source/bullseye/curl\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the curl packages.\n\nFor the stable distribution (bullseye), this problem has been fixed in version 7.74.0-1.3+deb11u7.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:M/Au:S/C:P/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:N/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-27774\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2023/02/27\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2023/03/01\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl3-gnutls\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl3-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-gnutls-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-nss-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-openssl-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:debian:debian_linux:11.0\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Debian Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Debian/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\ninclude('debian_package.inc');\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/Debian/dpkg-l\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar debian_release = get_kb_item('Host/Debian/release');\nif ( isnull(debian_release) ) audit(AUDIT_OS_NOT, 'Debian');\ndebian_release = chomp(debian_release);\nif (! preg(pattern:\"^(11)\\.[0-9]+\", string:debian_release)) audit(AUDIT_OS_NOT, 'Debian 11.0', 'Debian ' + debian_release);\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Debian', cpu);\n\nvar pkgs = [\n {'release': '11.0', 'prefix': 'curl', 'reference': '7.74.0-1.3+deb11u7'},\n {'release': '11.0', 'prefix': 'libcurl3-gnutls', 'reference': '7.74.0-1.3+deb11u7'},\n {'release': '11.0', 'prefix': 'libcurl3-nss', 'reference': '7.74.0-1.3+deb11u7'},\n {'release': '11.0', 'prefix': 'libcurl4', 'reference': '7.74.0-1.3+deb11u7'},\n {'release': '11.0', 'prefix': 'libcurl4-doc', 'reference': '7.74.0-1.3+deb11u7'},\n {'release': '11.0', 'prefix': 'libcurl4-gnutls-dev', 'reference': '7.74.0-1.3+deb11u7'},\n {'release': '11.0', 'prefix': 'libcurl4-nss-dev', 'reference': '7.74.0-1.3+deb11u7'},\n {'release': '11.0', 'prefix': 'libcurl4-openssl-dev', 'reference': '7.74.0-1.3+deb11u7'}\n];\n\nvar flag = 0;\nforeach package_array ( pkgs ) {\n var _release = NULL;\n var prefix = NULL;\n var reference = NULL;\n if (!empty_or_null(package_array['release'])) _release = package_array['release'];\n if (!empty_or_null(package_array['prefix'])) prefix = package_array['prefix'];\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (_release && prefix && reference) {\n if (deb_check(release:_release, prefix:prefix, reference:reference)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_NOTE,\n extra : deb_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = deb_pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / libcurl3-gnutls / libcurl3-nss / libcurl4 / libcurl4-doc / etc');\n}\n", "cvss": {"score": 3.5, "vector": "AV:N/AC:M/Au:S/C:P/I:N/A:N"}}, {"lastseen": "2023-01-10T19:24:41", "description": "The version of FreeBSD installed on the remote host is prior to tested version. It is, therefore, affected by multiple vulnerabilities as referenced in the 5ab54ea0-fa94-11ec-996c-080027b24e86 advisory.\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - Guzzle is a PHP HTTP client. Guzzle prior to versions 6.5.6 and 7.4.3 contains a vulnerability with the cookie middleware. The vulnerability is that it is not checked if the cookie domain equals the domain of the server which sets the cookie via the Set-Cookie header, allowing a malicious server to set cookies for unrelated domains. The cookie middleware is disabled by default, so most library consumers will not be affected by this issue. Only those who manually add the cookie middleware to the handler stack or construct the client with ['cookies' => true] are affected. Moreover, those who do not use the same Guzzle client to call multiple domains and have disabled redirect forwarding are not affected by this vulnerability. Guzzle versions 6.5.6 and 7.4.3 contain a patch for this issue. As a workaround, turn off the cookie middleware. (CVE-2022-29248)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "REQUIRED"}, "impactScore": 5.2}, "published": "2022-07-03T00:00:00", "type": "nessus", "title": "FreeBSD : mediawiki -- multiple vulnerabilities (5ab54ea0-fa94-11ec-996c-080027b24e86)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.6, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.8, "vectorString": "AV:N/AC:M/Au:N/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27776", "CVE-2022-29248"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:freebsd:freebsd:mediawiki135", "p-cpe:/a:freebsd:freebsd:mediawiki137", "p-cpe:/a:freebsd:freebsd:mediawiki138", "cpe:/o:freebsd:freebsd"], "id": "FREEBSD_PKG_5AB54EA0FA9411EC996C080027B24E86.NASL", "href": "https://www.tenable.com/plugins/nessus/162698", "sourceData": "#\n# (C) Tenable, Inc.\n#\n# @NOAGENT@\n#\n# The descriptive text and package checks in this plugin were\n# extracted from the FreeBSD VuXML database :\n#\n# Copyright 2003-2021 Jacques Vidrine and contributors\n#\n# Redistribution and use in source (VuXML) and 'compiled' forms (SGML,\n# HTML, PDF, PostScript, RTF and so forth) with or without modification,\n# are permitted provided that the following conditions are met:\n# 1. Redistributions of source code (VuXML) must retain the above\n# copyright notice, this list of conditions and the following\n# disclaimer as the first lines of this file unmodified.\n# 2. Redistributions in compiled form (transformed to other DTDs,\n# published online in any format, converted to PDF, PostScript,\n# RTF and other formats) must reproduce the above copyright\n# notice, this list of conditions and the following disclaimer\n# in the documentation and/or other materials provided with the\n# distribution.\n#\n# THIS DOCUMENTATION IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS \"AS IS\"\n# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,\n# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR\n# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS\n# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,\n# OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT\n# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR\n# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,\n# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE\n# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS DOCUMENTATION,\n# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(162698);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\"CVE-2022-27776\", \"CVE-2022-29248\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"FreeBSD : mediawiki -- multiple vulnerabilities (5ab54ea0-fa94-11ec-996c-080027b24e86)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote FreeBSD host is missing one or more security-related updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The version of FreeBSD installed on the remote host is prior to tested version. It is, therefore, affected by multiple\nvulnerabilities as referenced in the 5ab54ea0-fa94-11ec-996c-080027b24e86 advisory.\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - Guzzle is a PHP HTTP client. Guzzle prior to versions 6.5.6 and 7.4.3 contains a vulnerability with the\n cookie middleware. The vulnerability is that it is not checked if the cookie domain equals the domain of\n the server which sets the cookie via the Set-Cookie header, allowing a malicious server to set cookies for\n unrelated domains. The cookie middleware is disabled by default, so most library consumers will not be\n affected by this issue. Only those who manually add the cookie middleware to the handler stack or\n construct the client with ['cookies' => true] are affected. Moreover, those who do not use the same Guzzle\n client to call multiple domains and have disabled redirect forwarding are not affected by this\n vulnerability. Guzzle versions 6.5.6 and 7.4.3 contain a patch for this issue. As a workaround, turn off\n the cookie middleware. (CVE-2022-29248)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n # https://lists.wikimedia.org/hyperkitty/list/mediawiki-announce@lists.wikimedia.org/message/PIPYDRSHXOYW5DB7X755QDNUV5EZWPWB/\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?38afa4b2\");\n # https://vuxml.freebsd.org/freebsd/5ab54ea0-fa94-11ec-996c-080027b24e86.html\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?479dd84a\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:M/Au:N/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-29248\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/05/04\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/03\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/03\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:freebsd:freebsd:mediawiki135\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:freebsd:freebsd:mediawiki137\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:freebsd:freebsd:mediawiki138\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:freebsd:freebsd\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"FreeBSD Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/FreeBSD/release\", \"Host/FreeBSD/pkg_info\");\n\n exit(0);\n}\n\n\ninclude(\"freebsd_package.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/FreeBSD/release\")) audit(AUDIT_OS_NOT, \"FreeBSD\");\nif (!get_kb_item(\"Host/FreeBSD/pkg_info\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\n\nvar flag = 0;\n\nvar packages = [\n 'mediawiki135<1.35.7',\n 'mediawiki137<1.37.3',\n 'mediawiki138<1.38.2'\n];\n\nforeach var package( packages ) {\n if (pkg_test(save_report:TRUE, pkg: package)) flag++;\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : pkg_report_get()\n );\n exit(0);\n}\nelse audit(AUDIT_HOST_NOT, \"affected\");\n", "cvss": {"score": 5.8, "vector": "AV:N/AC:M/Au:N/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:27:51", "description": "According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-08-17T00:00:00", "type": "nessus", "title": "EulerOS 2.0 SP8 : curl (EulerOS-SA-2022-2217)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27781", "CVE-2022-27782"], "modified": "2022-08-22T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:curl", "p-cpe:/a:huawei:euleros:libcurl", "p-cpe:/a:huawei:euleros:libcurl-devel", "cpe:/o:huawei:euleros:2.0"], "id": "EULEROS_SA-2022-2217.NASL", "href": "https://www.tenable.com/plugins/nessus/164236", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(164236);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/08/22\");\n\n script_cve_id(\"CVE-2022-22576\", \"CVE-2022-27781\", \"CVE-2022-27782\");\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n\n script_name(english:\"EulerOS 2.0 SP8 : curl (EulerOS-SA-2022-2217)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the curl packages installed, the EulerOS installation on the remote host is affected by the\nfollowing vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned\n about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl\n built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security\nadvisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional\nissues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2022-2217\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?2c7b1c83\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/08/17\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/08/17\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:2.0\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/sp\");\n script_exclude_keys(\"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nvar uvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (release !~ \"^EulerOS release 2\\.0(\\D|$)\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP8\");\n\nvar sp = get_kb_item(\"Host/EulerOS/sp\");\nif (isnull(sp) || sp !~ \"^(8)$\") audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP8\");\n\nif (!empty_or_null(uvp)) audit(AUDIT_OS_NOT, \"EulerOS 2.0 SP8\", \"EulerOS UVP \" + uvp);\n\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"aarch64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"aarch64\", cpu);\n\nvar flag = 0;\n\nvar pkgs = [\n \"curl-7.61.1-2.h22.eulerosv2r8\",\n \"libcurl-7.61.1-2.h22.eulerosv2r8\",\n \"libcurl-devel-7.61.1-2.h22.eulerosv2r8\"\n];\n\nforeach (var pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", sp:\"8\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl\");\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:33:48", "description": "According to the versions of the curl packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-10-10T00:00:00", "type": "nessus", "title": "EulerOS Virtualization 3.0.6.0 : curl (EulerOS-SA-2022-2551)", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27781", "CVE-2022-27782"], "modified": "2022-10-18T00:00:00", "cpe": ["p-cpe:/a:huawei:euleros:curl", "p-cpe:/a:huawei:euleros:libcurl", "p-cpe:/a:huawei:euleros:libcurl-devel", "cpe:/o:huawei:euleros:uvp:3.0.6.0"], "id": "EULEROS_SA-2022-2551.NASL", "href": "https://www.tenable.com/plugins/nessus/165970", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(165970);\n script_version(\"1.3\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/10/18\");\n\n script_cve_id(\"CVE-2022-22576\", \"CVE-2022-27781\", \"CVE-2022-27782\");\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n\n script_name(english:\"EulerOS Virtualization 3.0.6.0 : curl (EulerOS-SA-2022-2551)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote EulerOS Virtualization host is missing multiple security updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"According to the versions of the curl packages installed, the EulerOS Virtualization installation on the remote host is\naffected by the following vulnerabilities :\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned\n about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl\n built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\nNote that Tenable Network Security has extracted the preceding description block directly from the EulerOS security\nadvisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional\nissues.\");\n # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2022-2551\n script_set_attribute(attribute:\"see_also\", value:\"http://www.nessus.org/u?fc32c6e1\");\n script_set_attribute(attribute:\"solution\", value:\n\"Update the affected curl packages.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/10/10\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/10/10\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:huawei:euleros:libcurl-devel\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:huawei:euleros:uvp:3.0.6.0\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Huawei Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/cpu\", \"Host/EulerOS/release\", \"Host/EulerOS/rpm-list\", \"Host/EulerOS/uvp_version\");\n\n exit(0);\n}\n\ninclude(\"rpm.inc\");\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\n\nvar release = get_kb_item(\"Host/EulerOS/release\");\nif (isnull(release) || release !~ \"^EulerOS\") audit(AUDIT_OS_NOT, \"EulerOS\");\nvar uvp = get_kb_item(\"Host/EulerOS/uvp_version\");\nif (uvp != \"3.0.6.0\") audit(AUDIT_OS_NOT, \"EulerOS Virtualization 3.0.6.0\");\nif (!get_kb_item(\"Host/EulerOS/rpm-list\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar cpu = get_kb_item(\"Host/cpu\");\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif (\"x86_64\" >!< cpu && cpu !~ \"^i[3-6]86$\" && \"aarch64\" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, \"EulerOS\", cpu);\nif (\"aarch64\" >!< cpu) audit(AUDIT_ARCH_NOT, \"aarch64\", cpu);\n\nvar flag = 0;\n\nvar pkgs = [\n \"curl-7.61.1-2.h22.eulerosv2r8\",\n \"libcurl-7.61.1-2.h22.eulerosv2r8\",\n \"libcurl-devel-7.61.1-2.h22.eulerosv2r8\"\n];\n\nforeach (var pkg in pkgs)\n if (rpm_check(release:\"EulerOS-2.0\", reference:pkg)) flag++;\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : rpm_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, \"curl\");\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-01-10T19:27:55", "description": "The remote Debian 10 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-3085 advisory.\n\n - curl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server, resulting in potentially revealing sensitive internal information to the server using a clear-text network protocol. (CVE-2021-22898)\n\n - libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse, if one of them matches the setup.Due to errors in the logic, the config matching function did not take 'issuercert' into account and it compared the involved paths *case insensitively*,which could lead to libcurl reusing wrong connections.File paths are, or can be, case sensitive on many systems but not all, and caneven vary depending on used file systems.The comparison also didn't include the 'issuer cert' which a transfer can setto qualify how to verify the server certificate. (CVE-2021-22924)\n\n - A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations\n **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network. (CVE-2021-22946)\n\n - When curl >= 7.20.0 and <= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches.\n curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker's injected data comes from the TLS-protected server. (CVE-2021-22947)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable links in this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a malloc bomb, makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client. (CVE-2022-32208)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-08-29T00:00:00", "type": "nessus", "title": "Debian DLA-3085-1 : curl - LTS security update", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2021-22898", "CVE-2021-22924", "CVE-2021-22946", "CVE-2021-22947", "CVE-2022-22576", "CVE-2022-27776", "CVE-2022-27781", "CVE-2022-27782", "CVE-2022-32206", "CVE-2022-32208"], "modified": "2022-12-05T00:00:00", "cpe": ["p-cpe:/a:debian:debian_linux:curl", "p-cpe:/a:debian:debian_linux:libcurl3-gnutls", "p-cpe:/a:debian:debian_linux:libcurl3-nss", "p-cpe:/a:debian:debian_linux:libcurl4", "p-cpe:/a:debian:debian_linux:libcurl4-doc", "p-cpe:/a:debian:debian_linux:libcurl4-gnutls-dev", "p-cpe:/a:debian:debian_linux:libcurl4-nss-dev", "p-cpe:/a:debian:debian_linux:libcurl4-openssl-dev", "cpe:/o:debian:debian_linux:10.0"], "id": "DEBIAN_DLA-3085.NASL", "href": "https://www.tenable.com/plugins/nessus/164482", "sourceData": "#%NASL_MIN_LEVEL 80900\n#\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Debian Security Advisory dla-3085. The text\n# itself is copyright (C) Software in the Public Interest, Inc.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(164482);\n script_version(\"1.5\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/05\");\n\n script_cve_id(\n \"CVE-2021-22898\",\n \"CVE-2021-22924\",\n \"CVE-2021-22946\",\n \"CVE-2021-22947\",\n \"CVE-2022-22576\",\n \"CVE-2022-27776\",\n \"CVE-2022-27781\",\n \"CVE-2022-27782\",\n \"CVE-2022-32206\",\n \"CVE-2022-32208\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0255-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"Debian DLA-3085-1 : curl - LTS security update\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Debian host is missing one or more security-related updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Debian 10 host has packages installed that are affected by multiple vulnerabilities as referenced in the\ndla-3085 advisory.\n\n - curl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as\n `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a\n flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized\n data from a stack based buffer to the server, resulting in potentially revealing sensitive internal\n information to the server using a clear-text network protocol. (CVE-2021-22898)\n\n - libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse, if one of\n them matches the setup.Due to errors in the logic, the config matching function did not take 'issuercert'\n into account and it compared the involved paths *case insensitively*,which could lead to libcurl reusing\n wrong connections.File paths are, or can be, case sensitive on many systems but not all, and caneven vary\n depending on used file systems.The comparison also didn't include the 'issuer cert' which a transfer can\n setto qualify how to verify the server certificate. (CVE-2021-22924)\n\n - A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an\n IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL`\n or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly\n crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations\n **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear\n text over the network. (CVE-2021-22946)\n\n - When curl >= 7.20.0 and <= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to\n upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches.\n curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using\n and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw,\n it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS\n traffic from the legitimate server and trick curl into sending data back to the user thinking the\n attacker's injected data comes from the TLS-protected server. (CVE-2021-22947)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned\n about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl\n built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be\n compressed multiple times and potentially with different algorithms. The number of acceptable links in\n this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited\n number of compression steps.The use of such a decompression chain could result in a malloc bomb,\n makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of\n memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject\n data to the client. (CVE-2022-32208)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=989228\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/source-package/curl\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.debian.org/lts/security/2022/dla-3085\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2021-22898\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2021-22924\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2021-22946\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2021-22947\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-22576\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27776\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27781\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27782\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-32206\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-32208\");\n script_set_attribute(attribute:\"see_also\", value:\"https://packages.debian.org/source/buster/curl\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the curl packages.\n\nFor Debian 10 buster, these problems have been fixed in version 7.64.0-4+deb10u3.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22576\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2021/05/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/08/29\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/08/29\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl3-gnutls\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl3-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-gnutls-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-nss-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-openssl-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:debian:debian_linux:10.0\");\n script_set_attribute(attribute:\"stig_severity\", value:\"II\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Debian Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Debian/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\ninclude('debian_package.inc');\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/Debian/dpkg-l\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar release = get_kb_item('Host/Debian/release');\nif ( isnull(release) ) audit(AUDIT_OS_NOT, 'Debian');\nvar release = chomp(release);\nif (! preg(pattern:\"^(10)\\.[0-9]+\", string:release)) audit(AUDIT_OS_NOT, 'Debian 10.0', 'Debian ' + release);\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Debian', cpu);\n\nvar pkgs = [\n {'release': '10.0', 'prefix': 'curl', 'reference': '7.64.0-4+deb10u3'},\n {'release': '10.0', 'prefix': 'libcurl3-gnutls', 'reference': '7.64.0-4+deb10u3'},\n {'release': '10.0', 'prefix': 'libcurl3-nss', 'reference': '7.64.0-4+deb10u3'},\n {'release': '10.0', 'prefix': 'libcurl4', 'reference': '7.64.0-4+deb10u3'},\n {'release': '10.0', 'prefix': 'libcurl4-doc', 'reference': '7.64.0-4+deb10u3'},\n {'release': '10.0', 'prefix': 'libcurl4-gnutls-dev', 'reference': '7.64.0-4+deb10u3'},\n {'release': '10.0', 'prefix': 'libcurl4-nss-dev', 'reference': '7.64.0-4+deb10u3'},\n {'release': '10.0', 'prefix': 'libcurl4-openssl-dev', 'reference': '7.64.0-4+deb10u3'}\n];\n\nvar flag = 0;\nforeach package_array ( pkgs ) {\n var release = NULL;\n var prefix = NULL;\n var reference = NULL;\n if (!empty_or_null(package_array['release'])) release = package_array['release'];\n if (!empty_or_null(package_array['prefix'])) prefix = package_array['prefix'];\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (release && prefix && reference) {\n if (deb_check(release:release, prefix:prefix, reference:reference)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : deb_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = deb_pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / libcurl3-gnutls / libcurl3-nss / libcurl4 / libcurl4-doc / etc');\n}\n", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-02-24T18:36:14", "description": "The remote host is affected by the vulnerability described in GLSA-202212-01 (curl: Multiple Vulnerabilities)\n\n - When curl is instructed to download content using the metalink feature, thecontents is verified against a hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same contentfrom a set of different URLs, potentially hosted by different servers and theclient can then download the file from one or several of them. In a serial orparallel manner.If one of the servers hosting the contents has been breached and the contentsof the specific file on that server is replaced with a modified payload, curlshould detect this when the hash of the file mismatches after a completeddownload.\n It should remove the contents and instead try getting the contentsfrom another URL. This is not done, and instead such a hash mismatch is onlymentioned in text and the potentially malicious content is kept in the file ondisk. (CVE-2021-22922)\n\n - When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user's expectations and intentions and without telling the user it happened. (CVE-2021-22923)\n\n - curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS`in libcurl. This rarely used option is used to send variable=content pairs toTELNET servers.Due to flaw in the option parser for sending `NEW_ENV` variables, libcurlcould be made to pass on uninitialized data from a stack based buffer to theserver. Therefore potentially revealing sensitive internal information to theserver using a clear- text network protocol.This could happen because curl did not call and use sscanf() correctly whenparsing the string provided by the application. (CVE-2021-22925)\n\n - libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake. (CVE-2021-22926)\n\n - When sending data to an MQTT server, libcurl <= 7.73.0 and 7.78.0 could in some circumstances erroneously keep a pointer to an already freed memory area and both use that again in a subsequent call to send data and also free it *again*. (CVE-2021-22945)\n\n - A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations\n **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network. (CVE-2021-22946)\n\n - When curl >= 7.20.0 and <= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches.\n curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker's injected data comes from the TLS-protected server. (CVE-2021-22947)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl's cookie engine can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain. (CVE-2022-27779)\n\n - The curl URL parser wrongly accepts percent-encoded URL separators like '/'when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.\n (CVE-2022-27780)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear- text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around\n - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.\n (CVE-2022-30115)\n\n - A malicious server can serve excessive amounts of `Set-Cookie:` headers in a HTTP response to curl and curl < 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven't expired. Due to cookie matching rules, a server on `foo.example.com` can set cookies that also would match for `bar.example.com`, making it it possible for a sister server to effectively cause a denial of service for a sibling site on the same second level domain using this method. (CVE-2022-32205)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable links in this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a malloc bomb, makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended. (CVE-2022-32207)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client. (CVE-2022-32208)\n\n - When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST. (CVE-2022-32221)\n\n - When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses.\n Effectively allowing asister site to deny service to all siblings. (CVE-2022-35252)\n\n - curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095 consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial- of-service. (CVE-2022-35260)\n\n - curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non- HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200 status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap, ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0. (CVE-2022-42915)\n\n - In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.).\n The earliest affected version is 7.77.0 2021-05-26. (CVE-2022-42916)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 9.8, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.9}, "published": "2022-12-18T00:00:00", "type": "nessus", "title": "GLSA-202212-01 : curl: Multiple Vulnerabilities", "bulletinFamily": "scanner", "cvss2": {"severity": "HIGH", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "baseScore": 7.5, "vectorString": "AV:N/AC:L/Au:N/C:P/I:P/A:P", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 6.4, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2021-22922", "CVE-2021-22923", "CVE-2021-22925", "CVE-2021-22926", "CVE-2021-22945", "CVE-2021-22946", "CVE-2021-22947", "CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-27779", "CVE-2022-27780", "CVE-2022-27781", "CVE-2022-27782", "CVE-2022-30115", "CVE-2022-32205", "CVE-2022-32206", "CVE-2022-32207", "CVE-2022-32208", "CVE-2022-32221", "CVE-2022-35252", "CVE-2022-35260", "CVE-2022-42915", "CVE-2022-42916"], "modified": "2022-12-19T00:00:00", "cpe": ["p-cpe:/a:gentoo:linux:curl", "cpe:/o:gentoo:linux"], "id": "GENTOO_GLSA-202212-01.NASL", "href": "https://www.tenable.com/plugins/nessus/168911", "sourceData": "#%NASL_MIN_LEVEL 80900\n#\n# (C) Tenable, Inc.\n#\n# @NOAGENT@\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Gentoo Linux Security Advisory GLSA 202212-01.\n#\n# The advisory text is Copyright (C) 2001-2021 Gentoo Foundation, Inc.\n# and licensed under the Creative Commons - Attribution / Share Alike\n# license. See http://creativecommons.org/licenses/by-sa/3.0/\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(168911);\n script_version(\"1.1\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2022/12/19\");\n\n script_cve_id(\n \"CVE-2021-22922\",\n \"CVE-2021-22923\",\n \"CVE-2021-22925\",\n \"CVE-2021-22926\",\n \"CVE-2021-22945\",\n \"CVE-2021-22946\",\n \"CVE-2021-22947\",\n \"CVE-2022-22576\",\n \"CVE-2022-27774\",\n \"CVE-2022-27775\",\n \"CVE-2022-27776\",\n \"CVE-2022-27779\",\n \"CVE-2022-27780\",\n \"CVE-2022-27781\",\n \"CVE-2022-27782\",\n \"CVE-2022-30115\",\n \"CVE-2022-32205\",\n \"CVE-2022-32206\",\n \"CVE-2022-32207\",\n \"CVE-2022-32208\",\n \"CVE-2022-32221\",\n \"CVE-2022-35252\",\n \"CVE-2022-35260\",\n \"CVE-2022-42915\",\n \"CVE-2022-42916\"\n );\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"GLSA-202212-01 : curl: Multiple Vulnerabilities\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote host is affected by the vulnerability described in GLSA-202212-01 (curl: Multiple Vulnerabilities)\n\n - When curl is instructed to download content using the metalink feature, thecontents is verified against a\n hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same\n contentfrom a set of different URLs, potentially hosted by different servers and theclient can then\n download the file from one or several of them. In a serial orparallel manner.If one of the servers hosting\n the contents has been breached and the contentsof the specific file on that server is replaced with a\n modified payload, curlshould detect this when the hash of the file mismatches after a completeddownload.\n It should remove the contents and instead try getting the contentsfrom another URL. This is not done, and\n instead such a hash mismatch is onlymentioned in text and the potentially malicious content is kept in the\n file ondisk. (CVE-2021-22922)\n\n - When curl is instructed to get content using the metalink feature, and a user name and password are used\n to download the metalink XML file, those same credentials are then subsequently passed on to each of the\n servers from which curl will download or try to download the contents from. Often contrary to the user's\n expectations and intentions and without telling the user it happened. (CVE-2021-22923)\n\n - curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS`in libcurl. This rarely used\n option is used to send variable=content pairs toTELNET servers.Due to flaw in the option parser for\n sending `NEW_ENV` variables, libcurlcould be made to pass on uninitialized data from a stack based buffer\n to theserver. Therefore potentially revealing sensitive internal information to theserver using a clear-\n text network protocol.This could happen because curl did not call and use sscanf() correctly whenparsing\n the string provided by the application. (CVE-2021-22925)\n\n - libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is\n done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use\n the macOS native TLS library Secure Transport, an application can ask for the client certificate by name\n or with a file name - using the same option. If the name exists as a file, it will be used instead of by\n name.If the appliction runs with a current working directory that is writable by other users (like\n `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and\n thereby trick the application to use the file based cert instead of the one referred to by name making\n libcurl send the wrong client certificate in the TLS connection handshake. (CVE-2021-22926)\n\n - When sending data to an MQTT server, libcurl <= 7.73.0 and 7.78.0 could in some circumstances erroneously\n keep a pointer to an already freed memory area and both use that again in a subsequent call to send data\n and also free it *again*. (CVE-2021-22945)\n\n - A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an\n IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL`\n or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly\n crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations\n **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear\n text over the network. (CVE-2021-22946)\n\n - When curl >= 7.20.0 and <= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to\n upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches.\n curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using\n and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw,\n it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS\n traffic from the legitimate server and trick curl into sending data back to the user thinking the\n attacker's injected data comes from the TLS-protected server. (CVE-2021-22947)\n\n - An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow\n reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated\n with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S),\n IMAP(S), POP3(S) and LDAP(S) (openldap only). (CVE-2022-22576)\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an\n IPv6 address that was in the connection pool but with a different zone id it could reuse a connection\n instead. (CVE-2022-27775)\n\n - A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or\n cookie header data on HTTP redirects to the same host but another port number. (CVE-2022-27776)\n\n - libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a\n trailing dot.curl can be told to receive and send cookies. curl's cookie engine can bebuilt with or\n without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more\n rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if\n thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would\n get sent to adifferent and unrelated site or domain. (CVE-2022-27779)\n\n - The curl URL parser wrongly accepts percent-encoded URL separators like '/'when decoding the host name\n part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For\n example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed\n into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.\n (CVE-2022-27780)\n\n - libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned\n about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl\n built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.\n (CVE-2022-27781)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-\n text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in\n the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around\n - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.\n (CVE-2022-30115)\n\n - A malicious server can serve excessive amounts of `Set-Cookie:` headers in a HTTP response to curl and\n curl < 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP\n requests to this, or other servers to which the cookies match, create requests that become larger than the\n threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead\n returns an error.This denial state might remain for as long as the same cookies are kept, match and\n haven't expired. Due to cookie matching rules, a server on `foo.example.com` can set cookies that also\n would match for `bar.example.com`, making it it possible for a sister server to effectively cause a\n denial of service for a sibling site on the same second level domain using this method. (CVE-2022-32205)\n\n - curl < 7.84.0 supports chained HTTP compression algorithms, meaning that a serverresponse can be\n compressed multiple times and potentially with different algorithms. The number of acceptable links in\n this decompression chain was unbounded, allowing a malicious server to insert a virtually unlimited\n number of compression steps.The use of such a decompression chain could result in a malloc bomb,\n makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of\n memory errors. (CVE-2022-32206)\n\n - When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by\n finalizing the operation with a rename from a temporary name to the final target file name.In that rename\n operation, it might accidentally *widen* the permissions for the target file, leaving the updated file\n accessible to more users than intended. (CVE-2022-32207)\n\n - When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly.\n This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject\n data to the client. (CVE-2022-32208)\n\n - When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to\n ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle\n previously was used to issue a `PUT` request which used that callback. This flaw may surprise the\n application and cause it to misbehave and either send off the wrong data or use memory after free or\n similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is\n changed from a PUT to a POST. (CVE-2022-32221)\n\n - When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control\n codes that when later are sent back to a HTTPserver might make the server return 400 responses.\n Effectively allowing asister site to deny service to all siblings. (CVE-2022-35252)\n\n - curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095\n consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based\n buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a\n segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide\n a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial-\n of-service. (CVE-2022-35260)\n\n - curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non-\n HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and\n then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often\n only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200\n status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in\n curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap,\n ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0. (CVE-2022-42915)\n\n - In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS\n support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step)\n even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL\n uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using\n the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.).\n The earliest affected version is 7.77.0 2021-05-26. (CVE-2022-42916)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security.gentoo.org/glsa/202212-01\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugs.gentoo.org/show_bug.cgi?id=803308\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugs.gentoo.org/show_bug.cgi?id=813270\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugs.gentoo.org/show_bug.cgi?id=841302\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugs.gentoo.org/show_bug.cgi?id=843824\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugs.gentoo.org/show_bug.cgi?id=854708\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugs.gentoo.org/show_bug.cgi?id=867679\");\n script_set_attribute(attribute:\"see_also\", value:\"https://bugs.gentoo.org/show_bug.cgi?id=878365\");\n script_set_attribute(attribute:\"solution\", value:\n\"All curl users should upgrade to the latest version:\n\n # emerge --sync\n # emerge --ask --oneshot --verbose >=net-misc/curl-7.86.0\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-32207\");\n script_set_attribute(attribute:\"cvss3_score_source\", value:\"CVE-2022-42915\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2021/07/24\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/12/19\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/12/18\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:gentoo:linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:gentoo:linux\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Gentoo Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2022 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Gentoo/release\", \"Host/Gentoo/qpkg-list\");\n\n exit(0);\n}\ninclude('qpkg.inc');\n\nif (!get_kb_item('Host/local_checks_enabled')) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item('Host/Gentoo/release')) audit(AUDIT_OS_NOT, 'Gentoo');\nif (!get_kb_item('Host/Gentoo/qpkg-list')) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar flag = 0;\n\nvar packages = [\n {\n 'name' : 'net-misc/curl',\n 'unaffected' : make_list(\"ge 7.86.0\"),\n 'vulnerable' : make_list(\"lt 7.86.0\")\n }\n];\n\nforeach var package( packages ) {\n if (isnull(package['unaffected'])) package['unaffected'] = make_list();\n if (isnull(package['vulnerable'])) package['vulnerable'] = make_list();\n if (qpkg_check(package: package['name'] , unaffected: package['unaffected'], vulnerable: package['vulnerable'])) flag++;\n}\n\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_HOLE,\n extra : qpkg_report_get()\n );\n exit(0);\n}\nelse\n{\n qpkg_tests = list_uniq(qpkg_tests);\n var tested = qpkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl');\n}\n", "cvss": {"score": 7.5, "vector": "AV:N/AC:L/Au:N/C:P/I:P/A:P"}}, {"lastseen": "2023-02-24T15:39:04", "description": "The remote Debian 11 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-5330 advisory.\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST. (CVE-2022-32221)\n\n - No description is available for this CVE. (CVE-2022-43551) (CVE-2022-43552)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 9.8, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.9}, "published": "2023-01-28T00:00:00", "type": "nessus", "title": "Debian DSA-5330-1 : curl - security update", "bulletinFamily": "scanner", "cvss2": {"severity": "LOW", "exploitabilityScore": 6.8, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 3.5, "vectorString": "AV:N/AC:M/Au:S/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27774", "CVE-2022-32221", "CVE-2022-43551", "CVE-2022-43552"], "modified": "2023-02-24T00:00:00", "cpe": ["p-cpe:/a:debian:debian_linux:curl", "p-cpe:/a:debian:debian_linux:libcurl3-gnutls", "p-cpe:/a:debian:debian_linux:libcurl3-nss", "p-cpe:/a:debian:debian_linux:libcurl4", "p-cpe:/a:debian:debian_linux:libcurl4-doc", "p-cpe:/a:debian:debian_linux:libcurl4-gnutls-dev", "p-cpe:/a:debian:debian_linux:libcurl4-nss-dev", "p-cpe:/a:debian:debian_linux:libcurl4-openssl-dev", "cpe:/o:debian:debian_linux:11.0"], "id": "DEBIAN_DSA-5330.NASL", "href": "https://www.tenable.com/plugins/nessus/170753", "sourceData": "#%NASL_MIN_LEVEL 80900\n#\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Debian Security Advisory dsa-5330. The text\n# itself is copyright (C) Software in the Public Interest, Inc.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(170753);\n script_version(\"1.1\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/02/24\");\n\n script_cve_id(\"CVE-2022-27774\", \"CVE-2022-32221\", \"CVE-2022-43552\");\n script_xref(name:\"IAVA\", value:\"2022-A-0451-S\");\n script_xref(name:\"IAVA\", value:\"2023-A-0008-S\");\n\n script_name(english:\"Debian DSA-5330-1 : curl - security update\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Debian host is missing one or more security-related updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Debian 11 host has packages installed that are affected by multiple vulnerabilities as referenced in the\ndsa-5330 advisory.\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to\n ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle\n previously was used to issue a `PUT` request which used that callback. This flaw may surprise the\n application and cause it to misbehave and either send off the wrong data or use memory after free or\n similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is\n changed from a PUT to a POST. (CVE-2022-32221)\n\n - No description is available for this CVE. (CVE-2022-43551) (CVE-2022-43552)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/source-package/curl\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.debian.org/security/2023/dsa-5330\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27774\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-32221\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-43552\");\n script_set_attribute(attribute:\"see_also\", value:\"https://packages.debian.org/source/bullseye/curl\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the curl packages.\n\nFor the stable distribution (bullseye), these problems have been fixed in version 7.74.0-1.3+deb11u5.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:M/Au:S/C:P/I:N/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-27774\");\n script_set_attribute(attribute:\"cvss3_score_source\", value:\"CVE-2022-32221\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2023/01/27\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2023/01/28\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl3-gnutls\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl3-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-gnutls-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-nss-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-openssl-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:debian:debian_linux:11.0\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Debian Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Debian/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\ninclude('debian_package.inc');\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/Debian/dpkg-l\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar debian_release = get_kb_item('Host/Debian/release');\nif ( isnull(debian_release) ) audit(AUDIT_OS_NOT, 'Debian');\ndebian_release = chomp(debian_release);\nif (! preg(pattern:\"^(11)\\.[0-9]+\", string:debian_release)) audit(AUDIT_OS_NOT, 'Debian 11.0', 'Debian ' + debian_release);\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Debian', cpu);\n\nvar pkgs = [\n {'release': '11.0', 'prefix': 'curl', 'reference': '7.74.0-1.3+deb11u5'},\n {'release': '11.0', 'prefix': 'libcurl3-gnutls', 'reference': '7.74.0-1.3+deb11u5'},\n {'release': '11.0', 'prefix': 'libcurl3-nss', 'reference': '7.74.0-1.3+deb11u5'},\n {'release': '11.0', 'prefix': 'libcurl4', 'reference': '7.74.0-1.3+deb11u5'},\n {'release': '11.0', 'prefix': 'libcurl4-doc', 'reference': '7.74.0-1.3+deb11u5'},\n {'release': '11.0', 'prefix': 'libcurl4-gnutls-dev', 'reference': '7.74.0-1.3+deb11u5'},\n {'release': '11.0', 'prefix': 'libcurl4-nss-dev', 'reference': '7.74.0-1.3+deb11u5'},\n {'release': '11.0', 'prefix': 'libcurl4-openssl-dev', 'reference': '7.74.0-1.3+deb11u5'}\n];\n\nvar flag = 0;\nforeach package_array ( pkgs ) {\n var _release = NULL;\n var prefix = NULL;\n var reference = NULL;\n if (!empty_or_null(package_array['release'])) _release = package_array['release'];\n if (!empty_or_null(package_array['prefix'])) prefix = package_array['prefix'];\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (_release && prefix && reference) {\n if (deb_check(release:_release, prefix:prefix, reference:reference)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_NOTE,\n extra : deb_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = deb_pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / libcurl3-gnutls / libcurl3-nss / libcurl4 / libcurl4-doc / etc');\n}\n", "cvss": {"score": 3.5, "vector": "AV:N/AC:M/Au:S/C:P/I:N/A:N"}}, {"lastseen": "2023-02-24T15:37:30", "description": "The remote Debian 10 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-3288 advisory.\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST. (CVE-2022-32221)\n\n - When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses.\n Effectively allowing asister site to deny service to all siblings. (CVE-2022-35252)\n\n - No description is available for this CVE. (CVE-2022-43551) (CVE-2022-43552)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 9.8, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.9}, "published": "2023-01-28T00:00:00", "type": "nessus", "title": "Debian DLA-3288-1 : curl - LTS security update", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "NONE", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.0, "vectorString": "AV:N/AC:L/Au:N/C:N/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27774", "CVE-2022-27782", "CVE-2022-32221", "CVE-2022-35252", "CVE-2022-43551", "CVE-2022-43552"], "modified": "2023-02-24T00:00:00", "cpe": ["p-cpe:/a:debian:debian_linux:curl", "p-cpe:/a:debian:debian_linux:libcurl3-gnutls", "p-cpe:/a:debian:debian_linux:libcurl3-nss", "p-cpe:/a:debian:debian_linux:libcurl4", "p-cpe:/a:debian:debian_linux:libcurl4-doc", "p-cpe:/a:debian:debian_linux:libcurl4-gnutls-dev", "p-cpe:/a:debian:debian_linux:libcurl4-nss-dev", "p-cpe:/a:debian:debian_linux:libcurl4-openssl-dev", "cpe:/o:debian:debian_linux:10.0"], "id": "DEBIAN_DLA-3288.NASL", "href": "https://www.tenable.com/plugins/nessus/170757", "sourceData": "#%NASL_MIN_LEVEL 80900\n#\n# (C) Tenable, Inc.\n#\n# The descriptive text and package checks in this plugin were\n# extracted from Debian Security Advisory dla-3288. The text\n# itself is copyright (C) Software in the Public Interest, Inc.\n#\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(170757);\n script_version(\"1.2\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/02/24\");\n\n script_cve_id(\n \"CVE-2022-27774\",\n \"CVE-2022-27782\",\n \"CVE-2022-32221\",\n \"CVE-2022-35252\",\n \"CVE-2022-43552\"\n );\n script_xref(name:\"IAVA\", value:\"2022-A-0451-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0224-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0350-S\");\n script_xref(name:\"IAVA\", value:\"2023-A-0008-S\");\n\n script_name(english:\"Debian DLA-3288-1 : curl - LTS security update\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Debian host is missing one or more security-related updates.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Debian 10 host has packages installed that are affected by multiple vulnerabilities as referenced in the\ndla-3288 advisory.\n\n - An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are\n affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with\n authentication could leak credentials to other services that exist on different protocols or port numbers.\n (CVE-2022-27774)\n\n - libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed\n that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for\n subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were\n left out from the configuration match checks, making themmatch too easily. (CVE-2022-27782)\n\n - When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to\n ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle\n previously was used to issue a `PUT` request which used that callback. This flaw may surprise the\n application and cause it to misbehave and either send off the wrong data or use memory after free or\n similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is\n changed from a PUT to a POST. (CVE-2022-32221)\n\n - When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control\n codes that when later are sent back to a HTTPserver might make the server return 400 responses.\n Effectively allowing asister site to deny service to all siblings. (CVE-2022-35252)\n\n - No description is available for this CVE. (CVE-2022-43551) (CVE-2022-43552)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/source-package/curl\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.debian.org/lts/security/2023/dla-3288\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27774\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-27782\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-32221\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-35252\");\n script_set_attribute(attribute:\"see_also\", value:\"https://security-tracker.debian.org/tracker/CVE-2022-43552\");\n script_set_attribute(attribute:\"see_also\", value:\"https://packages.debian.org/source/buster/curl\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade the curl packages.\n\nFor Debian 10 buster, these problems have been fixed in version 7.64.0-4+deb10u4.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:N/C:N/I:P/A:N\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-27782\");\n script_set_attribute(attribute:\"cvss3_score_source\", value:\"CVE-2022-32221\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"false\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/04/28\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2023/01/28\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2023/01/28\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:curl\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl3-gnutls\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl3-nss\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-doc\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-gnutls-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-nss-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"p-cpe:/a:debian:debian_linux:libcurl4-openssl-dev\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:debian:debian_linux:10.0\");\n script_set_attribute(attribute:\"generated_plugin\", value:\"current\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Debian Local Security Checks\");\n\n script_copyright(english:\"This script is Copyright (C) 2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ssh_get_info.nasl\");\n script_require_keys(\"Host/local_checks_enabled\", \"Host/Debian/release\", \"Host/Debian/dpkg-l\");\n\n exit(0);\n}\n\ninclude('debian_package.inc');\n\nif (!get_kb_item(\"Host/local_checks_enabled\")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);\nif (!get_kb_item(\"Host/Debian/dpkg-l\")) audit(AUDIT_PACKAGE_LIST_MISSING);\n\nvar debian_release = get_kb_item('Host/Debian/release');\nif ( isnull(debian_release) ) audit(AUDIT_OS_NOT, 'Debian');\ndebian_release = chomp(debian_release);\nif (! preg(pattern:\"^(10)\\.[0-9]+\", string:debian_release)) audit(AUDIT_OS_NOT, 'Debian 10.0', 'Debian ' + debian_release);\nvar cpu = get_kb_item('Host/cpu');\nif (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);\nif ('x86_64' >!< cpu && cpu !~ \"^i[3-6]86$\" && 'aarch64' >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, 'Debian', cpu);\n\nvar pkgs = [\n {'release': '10.0', 'prefix': 'curl', 'reference': '7.64.0-4+deb10u4'},\n {'release': '10.0', 'prefix': 'libcurl3-gnutls', 'reference': '7.64.0-4+deb10u4'},\n {'release': '10.0', 'prefix': 'libcurl3-nss', 'reference': '7.64.0-4+deb10u4'},\n {'release': '10.0', 'prefix': 'libcurl4', 'reference': '7.64.0-4+deb10u4'},\n {'release': '10.0', 'prefix': 'libcurl4-doc', 'reference': '7.64.0-4+deb10u4'},\n {'release': '10.0', 'prefix': 'libcurl4-gnutls-dev', 'reference': '7.64.0-4+deb10u4'},\n {'release': '10.0', 'prefix': 'libcurl4-nss-dev', 'reference': '7.64.0-4+deb10u4'},\n {'release': '10.0', 'prefix': 'libcurl4-openssl-dev', 'reference': '7.64.0-4+deb10u4'}\n];\n\nvar flag = 0;\nforeach package_array ( pkgs ) {\n var _release = NULL;\n var prefix = NULL;\n var reference = NULL;\n if (!empty_or_null(package_array['release'])) _release = package_array['release'];\n if (!empty_or_null(package_array['prefix'])) prefix = package_array['prefix'];\n if (!empty_or_null(package_array['reference'])) reference = package_array['reference'];\n if (_release && prefix && reference) {\n if (deb_check(release:_release, prefix:prefix, reference:reference)) flag++;\n }\n}\n\nif (flag)\n{\n security_report_v4(\n port : 0,\n severity : SECURITY_WARNING,\n extra : deb_report_get()\n );\n exit(0);\n}\nelse\n{\n var tested = deb_pkg_tests_get();\n if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);\n else audit(AUDIT_PACKAGE_NOT_INSTALLED, 'curl / libcurl3-gnutls / libcurl3-nss / libcurl4 / libcurl4-doc / etc');\n}\n", "cvss": {"score": 5.0, "vector": "AV:N/AC:L/Au:N/C:N/I:P/A:N"}}, {"lastseen": "2023-03-07T17:41:45", "description": "The version of IBM Rational ClearCase installed on the remote host is affected by multiple vulnerabilities, including the following:\n\n - A use of incorrectly resolved name vulnerability fixed in 7.83.1 might remove the wrong file when '--no-clobber' is used together with '--remove-on-error'. (CVE-2022-27778)\n\n - The curl URL parser wrongly accepts percent-encoded URL separators like '/' when decoding the host name part of a URL, making it a *different* URL using the wrong host name when it is later retrieved. For example, a URL like 'http://example.com%2F127.0.0.1/', would be allowed bythe parser and get transposed into 'http://example.com/127.0.0.1/'. This flaw can be used to circumvent filters, checks and more.\n (CVE-2022-27780)\n\n - libcurl would reuse a previously created connection even when a TLS or SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, several TLS and SSH settings were left out from the configuration match checks, making them match too easily. (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "NONE", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H", "version": "3.1", "userInteraction": "REQUIRED"}, "impactScore": 5.2}, "published": "2023-03-06T00:00:00", "type": "nessus", "title": "IBM Rational ClearCase 8.0 < 9.0.0.6 / 9.0.1 < 9.0.1.14 / 9.0.2 < 9.0.2.6 / 9.1 < 9.1.0.3 Multiple Vulnerabilities", "bulletinFamily": "scanner", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.6, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "NONE", "availabilityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "baseScore": 5.8, "vectorString": "AV:N/AC:M/Au:N/C:N/I:P/A:P", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27774", "CVE-2022-27778", "CVE-2022-27779", "CVE-2022-27780", "CVE-2022-27782", "CVE-2022-30115"], "modified": "2023-03-07T00:00:00", "cpe": ["cpe:2.3:a:ibm:rational_clearcase:*:*:*:*:*:*:*:*"], "id": "IBM_RATIONAL_CLEARCASE_6606577.NASL", "href": "https://www.tenable.com/plugins/nessus/172123", "sourceData": "#%NASL_MIN_LEVEL 80900\n##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(172123);\n script_version(\"1.1\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/03/07\");\n\n script_cve_id(\n \"CVE-2022-27774\",\n \"CVE-2022-27778\",\n \"CVE-2022-27779\",\n \"CVE-2022-27780\",\n \"CVE-2022-27782\",\n \"CVE-2022-30115\"\n );\n script_xref(name:\"IAVB\", value:\"2022-B-0023\");\n\n script_name(english:\"IBM Rational ClearCase 8.0 < 9.0.0.6 / 9.0.1 < 9.0.1.14 / 9.0.2 < 9.0.2.6 / 9.1 < 9.1.0.3 Multiple Vulnerabilities\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The IBM Rational ClearCase installed on the remote host is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The version of IBM Rational ClearCase installed on the remote host is affected by multiple vulnerabilities, including\nthe following:\n\n - A use of incorrectly resolved name vulnerability fixed in 7.83.1 might remove the wrong file when\n '--no-clobber' is used together with '--remove-on-error'. (CVE-2022-27778)\n\n - The curl URL parser wrongly accepts percent-encoded URL separators like '/' when decoding the host name\n part of a URL, making it a *different* URL using the wrong host name when it is later retrieved. For\n example, a URL like 'http://example.com%2F127.0.0.1/', would be allowed bythe parser and get transposed\n into 'http://example.com/127.0.0.1/'. This flaw can be used to circumvent filters, checks and more.\n (CVE-2022-27780)\n\n - libcurl would reuse a previously created connection even when a TLS or SSH related option had been changed\n that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for\n subsequent transfers to reuse if one of them matches the setup. However, several TLS and SSH settings were\n left out from the configuration match checks, making them match too easily. (CVE-2022-27782)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://www.ibm.com/support/pages/node/6606577\");\n script_set_attribute(attribute:\"solution\", value:\n\"Upgrade to IBM Rational ClearCase Fix Pack 14 (9.0.1.14) for 9.0.1, Fix Pack 6 (9.0.2.6) for 9.0.2, Fix Pack 3\n(9.1.0.3) for 9.1, or later.\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:M/Au:N/C:N/I:P/A:P\");\n script_set_cvss_temporal_vector(\"CVSS2#E:U/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:U/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-27778\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"No known exploits are available\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/07/25\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/25\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2023/03/06\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/a:ibm:rational_clearcase\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Windows\");\n\n script_copyright(english:\"This script is Copyright (C) 2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"ibm_rational_clearcase_win_installed.nbin\");\n script_require_keys(\"installed_sw/IBM Rational ClearCase\");\n\n exit(0);\n}\ninclude('vcf.inc');\n\napp = 'IBM Rational ClearCase';\napp_info = vcf::get_app_info(app:app, win_local:TRUE);\n\nconstraints = [\n { 'min_version' : '8.0', 'fixed_version' : '9.0.6', 'fixed_display' : 'See vendor advisory' },\n { 'min_version' : '9.0.1', 'fixed_version' : '9.0.1.14' },\n { 'min_version' : '9.0.2', 'fixed_version' : '9.0.2.6' },\n { 'min_version' : '9.1', 'fixed_version' : '9.1.0.3' }\n];\n\nvcf::check_version_and_report(app_info:app_info, constraints:constraints, severity:SECURITY_WARNING);\n", "cvss": {"score": 5.8, "vector": "AV:N/AC:M/Au:N/C:N/I:P/A:P"}}, {"lastseen": "2023-03-13T14:45:06", "description": "The remote Windows host is missing security update 5015814. It is, therefore, affected by multiple vulnerabilities:\n - An elevation of privilege vulnerability. An attacker can exploit this to gain elevated privileges.\n (CVE-2022-22022, CVE-2022-22026, CVE-2022-22031, CVE-2022-22034, CVE-2022-22036, CVE-2022-22037, CVE-2022-22041, CVE-2022-22045, CVE-2022-22047, CVE-2022-22049, CVE-2022-22050, CVE-2022-30202, CVE-2022-30205, CVE-2022-30206, CVE-2022-30209, CVE-2022-30220, CVE-2022-30224, CVE-2022-30225, CVE-2022-30226)\n\n - A security feature bypass vulnerability exists. An attacker can exploit this and bypass the security feature and perform unauthorized actions compromising the integrity of the system/application.\n (CVE-2022-22023, CVE-2022-22048, CVE-2022-30203)\n\n - A remote code execution vulnerability. An attacker can exploit this to bypass authentication and execute unauthorized arbitrary commands. (CVE-2022-22024, CVE-2022-22027, CVE-2022-22038, CVE-2022-30211, CVE-2022-30221, CVE-2022-30222)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.0, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.8, "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 6.0}, "published": "2022-07-12T00:00:00", "type": "nessus", "title": "KB5015814: Windows 11 Security Update (July 2022)", "bulletinFamily": "scanner", "cvss2": {"severity": "HIGH", "exploitabilityScore": 6.8, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "COMPLETE", "integrityImpact": "COMPLETE", "baseScore": 8.5, "vectorString": "AV:N/AC:M/Au:S/C:C/I:C/A:C", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 10.0, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-21845", "CVE-2022-22022", "CVE-2022-22023", "CVE-2022-22024", "CVE-2022-22025", "CVE-2022-22026", "CVE-2022-22027", "CVE-2022-22031", "CVE-2022-22034", "CVE-2022-22036", "CVE-2022-22037", "CVE-2022-22038", "CVE-2022-22040", "CVE-2022-22041", "CVE-2022-22042", "CVE-2022-22043", "CVE-2022-22045", "CVE-2022-22047", "CVE-2022-22048", "CVE-2022-22049", "CVE-2022-22050", "CVE-2022-22711", "CVE-2022-27776", "CVE-2022-30202", "CVE-2022-30203", "CVE-2022-30205", "CVE-2022-30206", "CVE-2022-30208", "CVE-2022-30209", "CVE-2022-30211", "CVE-2022-30212", "CVE-2022-30213", "CVE-2022-30216", "CVE-2022-30220", "CVE-2022-30221", "CVE-2022-30222", "CVE-2022-30223", "CVE-2022-30224", "CVE-2022-30225", "CVE-2022-30226"], "modified": "2023-01-16T00:00:00", "cpe": ["cpe:/o:microsoft:windows"], "id": "SMB_NT_MS22_JUL_5015814.NASL", "href": "https://www.tenable.com/plugins/nessus/163041", "sourceData": "##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(163041);\n script_version(\"1.11\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/01/16\");\n\n script_cve_id(\n \"CVE-2022-21845\",\n \"CVE-2022-22022\",\n \"CVE-2022-22023\",\n \"CVE-2022-22024\",\n \"CVE-2022-22025\",\n \"CVE-2022-22026\",\n \"CVE-2022-22027\",\n \"CVE-2022-22031\",\n \"CVE-2022-22034\",\n \"CVE-2022-22036\",\n \"CVE-2022-22037\",\n \"CVE-2022-22038\",\n \"CVE-2022-22040\",\n \"CVE-2022-22041\",\n \"CVE-2022-22042\",\n \"CVE-2022-22043\",\n \"CVE-2022-22045\",\n \"CVE-2022-22047\",\n \"CVE-2022-22048\",\n \"CVE-2022-22049\",\n \"CVE-2022-22050\",\n \"CVE-2022-22711\",\n \"CVE-2022-27776\",\n \"CVE-2022-30202\",\n \"CVE-2022-30203\",\n \"CVE-2022-30205\",\n \"CVE-2022-30206\",\n \"CVE-2022-30208\",\n \"CVE-2022-30209\",\n \"CVE-2022-30211\",\n \"CVE-2022-30212\",\n \"CVE-2022-30213\",\n \"CVE-2022-30216\",\n \"CVE-2022-30220\",\n \"CVE-2022-30221\",\n \"CVE-2022-30222\",\n \"CVE-2022-30223\",\n \"CVE-2022-30224\",\n \"CVE-2022-30225\",\n \"CVE-2022-30226\"\n );\n script_xref(name:\"MSKB\", value:\"5015814\");\n script_xref(name:\"MSFT\", value:\"MS22-5015814\");\n script_xref(name:\"CISA-KNOWN-EXPLOITED\", value:\"2022/08/02\");\n script_xref(name:\"IAVA\", value:\"2022-A-0272-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0273-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"KB5015814: Windows 11 Security Update (July 2022)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Windows host is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Windows host is missing security update 5015814. It is, therefore, affected by multiple vulnerabilities:\n \n - An elevation of privilege vulnerability. An attacker can\n exploit this to gain elevated privileges.\n (CVE-2022-22022, CVE-2022-22026, CVE-2022-22031,\n CVE-2022-22034, CVE-2022-22036, CVE-2022-22037,\n CVE-2022-22041, CVE-2022-22045, CVE-2022-22047,\n CVE-2022-22049, CVE-2022-22050, CVE-2022-30202,\n CVE-2022-30205, CVE-2022-30206, CVE-2022-30209,\n CVE-2022-30220, CVE-2022-30224, CVE-2022-30225,\n CVE-2022-30226)\n\n - A security feature bypass vulnerability exists. An\n attacker can exploit this and bypass the security\n feature and perform unauthorized actions compromising\n the integrity of the system/application.\n (CVE-2022-22023, CVE-2022-22048, CVE-2022-30203)\n\n - A remote code execution vulnerability. An attacker can\n exploit this to bypass authentication and execute\n unauthorized arbitrary commands. (CVE-2022-22024,\n CVE-2022-22027, CVE-2022-22038, CVE-2022-30211,\n CVE-2022-30221, CVE-2022-30222)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://support.microsoft.com/en-us/help/5015814\");\n script_set_attribute(attribute:\"see_also\", value:\"https://support.microsoft.com/help/5015814\");\n script_set_attribute(attribute:\"solution\", value:\n\"Apply Security Update 5015814\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:M/Au:S/C:C/I:C/A:C\");\n script_set_cvss_temporal_vector(\"CVSS2#E:H/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:H/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22041\");\n script_set_attribute(attribute:\"cvss3_score_source\", value:\"CVE-2022-30221\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"Exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"true\");\n script_set_attribute(attribute:\"exploit_framework_core\", value:\"true\");\n script_set_attribute(attribute:\"exploited_by_malware\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/05/04\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/12\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:microsoft:windows\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Windows : Microsoft Bulletins\");\n\n script_copyright(english:\"This script is Copyright (C) 2022-2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"smb_check_rollup.nasl\", \"smb_hotfixes.nasl\", \"ms_bulletin_checks_possible.nasl\");\n script_require_keys(\"SMB/MS_Bulletin_Checks/Possible\");\n script_require_ports(139, 445, \"Host/patch_management_checks\");\n\n exit(0);\n}\n\ninclude('smb_func.inc');\ninclude('smb_hotfixes.inc');\ninclude('smb_hotfixes_fcheck.inc');\ninclude('smb_reg_query.inc');\n\nget_kb_item_or_exit('SMB/MS_Bulletin_Checks/Possible');\n\nbulletin = 'MS22-07';\nkbs = make_list(\n '5015814'\n);\n\nif (get_kb_item('Host/patch_management_checks')) hotfix_check_3rd_party(bulletin:bulletin, kbs:kbs, severity:SECURITY_HOLE);\n\nget_kb_item_or_exit('SMB/Registry/Enumerated');\nget_kb_item_or_exit('SMB/WindowsVersion', exit_code:1);\n\nif (hotfix_check_sp_range(win10:'0') <= 0) audit(AUDIT_OS_SP_NOT_VULN);\n\nshare = hotfix_get_systemdrive(as_share:TRUE, exit_on_fail:TRUE);\nif (!is_accessible_share(share:share)) audit(AUDIT_SHARE_FAIL, share);\n\nif (\n smb_check_rollup(os:'10',\n os_build:22000,\n rollup_date:'07_2022',\n bulletin:bulletin,\n rollup_kb_list:[5015814])\n)\n{\n replace_kb_item(name:'SMB/Missing/'+bulletin, value:TRUE);\n hotfix_security_hole();\n hotfix_check_fversion_end();\n exit(0);\n}\nelse\n{\n hotfix_check_fversion_end();\n audit(AUDIT_HOST_NOT, hotfix_get_audit_report());\n}\n", "cvss": {"score": 8.5, "vector": "AV:N/AC:M/Au:S/C:C/I:C/A:C"}}, {"lastseen": "2023-03-14T15:20:39", "description": "The remote Windows host is missing security update 5015811.\nIt is, therefore, affected by multiple vulnerabilities:\n\n - A remote code execution vulnerability. An attacker can exploit this to bypass authentication and execute unauthorized arbitrary commands. (CVE-2022-22024, CVE-2022-22027, CVE-2022-22029, CVE-2022-22038, CVE-2022-22039, CVE-2022-30211, CVE-2022-30214, CVE-2022-30221, CVE-2022-30222)\n\n - A security feature bypass vulnerability exists. An attacker can exploit this and bypass the security feature and perform unauthorized actions compromising the integrity of the system/application.\n (CVE-2022-22023, CVE-2022-22048, CVE-2022-30203)\n\n - An elevation of privilege vulnerability. An attacker can exploit this to gain elevated privileges.\n (CVE-2022-22022, CVE-2022-22026, CVE-2022-22031, CVE-2022-22034, CVE-2022-22036, CVE-2022-22037, CVE-2022-22041, CVE-2022-22045, CVE-2022-22047, CVE-2022-22049, CVE-2022-22050, CVE-2022-30202, CVE-2022-30205, CVE-2022-30206, CVE-2022-30209, CVE-2022-30215, CVE-2022-30220, CVE-2022-30224, CVE-2022-30225, CVE-2022-30226)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.0, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.8, "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 6.0}, "published": "2022-07-12T00:00:00", "type": "nessus", "title": "KB5015811: Windows 10 version 1809 / Windows Server 2019 Security Update (July 2022)", "bulletinFamily": "scanner", "cvss2": {"severity": "HIGH", "exploitabilityScore": 6.8, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "COMPLETE", "integrityImpact": "COMPLETE", "baseScore": 8.5, "vectorString": "AV:N/AC:M/Au:S/C:C/I:C/A:C", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 10.0, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-21845", "CVE-2022-22022", "CVE-2022-22023", "CVE-2022-22024", "CVE-2022-22025", "CVE-2022-22026", "CVE-2022-22027", "CVE-2022-22028", "CVE-2022-22029", "CVE-2022-22031", "CVE-2022-22034", "CVE-2022-22036", "CVE-2022-22037", "CVE-2022-22038", "CVE-2022-22039", "CVE-2022-22040", "CVE-2022-22041", "CVE-2022-22042", "CVE-2022-22043", "CVE-2022-22045", "CVE-2022-22047", "CVE-2022-22048", "CVE-2022-22049", "CVE-2022-22050", "CVE-2022-22711", "CVE-2022-27776", "CVE-2022-30202", "CVE-2022-30203", "CVE-2022-30205", "CVE-2022-30206", "CVE-2022-30208", "CVE-2022-30209", "CVE-2022-30211", "CVE-2022-30212", "CVE-2022-30213", "CVE-2022-30214", "CVE-2022-30215", "CVE-2022-30220", "CVE-2022-30221", "CVE-2022-30222", "CVE-2022-30223", "CVE-2022-30224", "CVE-2022-30225", "CVE-2022-30226"], "modified": "2023-01-16T00:00:00", "cpe": ["cpe:/o:microsoft:windows"], "id": "SMB_NT_MS22_JUL_5015811.NASL", "href": "https://www.tenable.com/plugins/nessus/163046", "sourceData": "##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(163046);\n script_version(\"1.11\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/01/16\");\n\n script_cve_id(\n \"CVE-2022-21845\",\n \"CVE-2022-22022\",\n \"CVE-2022-22023\",\n \"CVE-2022-22024\",\n \"CVE-2022-22025\",\n \"CVE-2022-22026\",\n \"CVE-2022-22027\",\n \"CVE-2022-22028\",\n \"CVE-2022-22029\",\n \"CVE-2022-22031\",\n \"CVE-2022-22034\",\n \"CVE-2022-22036\",\n \"CVE-2022-22037\",\n \"CVE-2022-22038\",\n \"CVE-2022-22039\",\n \"CVE-2022-22040\",\n \"CVE-2022-22041\",\n \"CVE-2022-22042\",\n \"CVE-2022-22043\",\n \"CVE-2022-22045\",\n \"CVE-2022-22047\",\n \"CVE-2022-22048\",\n \"CVE-2022-22049\",\n \"CVE-2022-22050\",\n \"CVE-2022-22711\",\n \"CVE-2022-27776\",\n \"CVE-2022-30202\",\n \"CVE-2022-30203\",\n \"CVE-2022-30205\",\n \"CVE-2022-30206\",\n \"CVE-2022-30208\",\n \"CVE-2022-30209\",\n \"CVE-2022-30211\",\n \"CVE-2022-30212\",\n \"CVE-2022-30213\",\n \"CVE-2022-30214\",\n \"CVE-2022-30215\",\n \"CVE-2022-30220\",\n \"CVE-2022-30221\",\n \"CVE-2022-30222\",\n \"CVE-2022-30223\",\n \"CVE-2022-30224\",\n \"CVE-2022-30225\",\n \"CVE-2022-30226\"\n );\n script_xref(name:\"MSKB\", value:\"5015811\");\n script_xref(name:\"MSFT\", value:\"MS22-5015811\");\n script_xref(name:\"CISA-KNOWN-EXPLOITED\", value:\"2022/08/02\");\n script_xref(name:\"IAVA\", value:\"2022-A-0272-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0273-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"KB5015811: Windows 10 version 1809 / Windows Server 2019 Security Update (July 2022)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Windows host is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Windows host is missing security update 5015811.\nIt is, therefore, affected by multiple vulnerabilities:\n\n - A remote code execution vulnerability. An attacker can\n exploit this to bypass authentication and execute\n unauthorized arbitrary commands. (CVE-2022-22024,\n CVE-2022-22027, CVE-2022-22029, CVE-2022-22038,\n CVE-2022-22039, CVE-2022-30211, CVE-2022-30214,\n CVE-2022-30221, CVE-2022-30222)\n\n - A security feature bypass vulnerability exists. An\n attacker can exploit this and bypass the security\n feature and perform unauthorized actions compromising\n the integrity of the system/application.\n (CVE-2022-22023, CVE-2022-22048, CVE-2022-30203)\n\n - An elevation of privilege vulnerability. An attacker can\n exploit this to gain elevated privileges.\n (CVE-2022-22022, CVE-2022-22026, CVE-2022-22031,\n CVE-2022-22034, CVE-2022-22036, CVE-2022-22037,\n CVE-2022-22041, CVE-2022-22045, CVE-2022-22047,\n CVE-2022-22049, CVE-2022-22050, CVE-2022-30202,\n CVE-2022-30205, CVE-2022-30206, CVE-2022-30209,\n CVE-2022-30215, CVE-2022-30220, CVE-2022-30224,\n CVE-2022-30225, CVE-2022-30226)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://support.microsoft.com/en-us/help/5015811\");\n script_set_attribute(attribute:\"see_also\", value:\"https://support.microsoft.com/help/5015811\");\n script_set_attribute(attribute:\"solution\", value:\n\"Apply Security Update 5015811\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:M/Au:S/C:C/I:C/A:C\");\n script_set_cvss_temporal_vector(\"CVSS2#E:H/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:H/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-30215\");\n script_set_attribute(attribute:\"cvss3_score_source\", value:\"CVE-2022-30221\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"Exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"true\");\n script_set_attribute(attribute:\"exploit_framework_core\", value:\"true\");\n script_set_attribute(attribute:\"exploited_by_malware\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/05/04\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/12\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:microsoft:windows\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Windows : Microsoft Bulletins\");\n\n script_copyright(english:\"This script is Copyright (C) 2022-2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"smb_check_rollup.nasl\", \"smb_hotfixes.nasl\", \"ms_bulletin_checks_possible.nasl\");\n script_require_keys(\"SMB/MS_Bulletin_Checks/Possible\");\n script_require_ports(139, 445, \"Host/patch_management_checks\");\n\n exit(0);\n}\n\ninclude('smb_func.inc');\ninclude('smb_hotfixes.inc');\ninclude('smb_hotfixes_fcheck.inc');\ninclude('smb_reg_query.inc');\n\nget_kb_item_or_exit('SMB/MS_Bulletin_Checks/Possible');\n\nbulletin = 'MS22-07';\nkbs = make_list(\n '5015811'\n);\n\nif (get_kb_item('Host/patch_management_checks')) hotfix_check_3rd_party(bulletin:bulletin, kbs:kbs, severity:SECURITY_HOLE);\n\nget_kb_item_or_exit('SMB/Registry/Enumerated');\nget_kb_item_or_exit('SMB/WindowsVersion', exit_code:1);\n\nif (hotfix_check_sp_range(win10:'0') <= 0) audit(AUDIT_OS_SP_NOT_VULN);\n\nshare = hotfix_get_systemdrive(as_share:TRUE, exit_on_fail:TRUE);\nif (!is_accessible_share(share:share)) audit(AUDIT_SHARE_FAIL, share);\n\nif (\n smb_check_rollup(os:'10',\n os_build:17763,\n rollup_date:'07_2022',\n bulletin:bulletin,\n rollup_kb_list:[5015811])\n)\n{\n replace_kb_item(name:'SMB/Missing/'+bulletin, value:TRUE);\n hotfix_security_hole();\n hotfix_check_fversion_end();\n exit(0);\n}\nelse\n{\n hotfix_check_fversion_end();\n audit(AUDIT_HOST_NOT, hotfix_get_audit_report());\n}\n", "cvss": {"score": 8.5, "vector": "AV:N/AC:M/Au:S/C:C/I:C/A:C"}}, {"lastseen": "2023-03-15T04:28:50", "description": "The remote Windows host is missing security update 5015807. It is, therefore, affected by multiple vulnerabilities:\n\n - A remote code execution vulnerability. An attacker can exploit this to bypass authentication and execute unauthorized arbitrary commands. (CVE-2022-22024, CVE-2022-22027, CVE-2022-22029, CVE-2022-22038, CVE-2022-22039, CVE-2022-30211, CVE-2022-30214, CVE-2022-30221, CVE-2022-30222)\n\n - A security feature bypass vulnerability exists. An attacker can exploit this and bypass the security feature and perform unauthorized actions compromising the integrity of the system/application.\n (CVE-2022-22023, CVE-2022-22048, CVE-2022-30203)\n\n - An elevation of privilege vulnerability. An attacker can exploit this to gain elevated privileges.\n (CVE-2022-22022, CVE-2022-22026, CVE-2022-22031, CVE-2022-22034, CVE-2022-22036, CVE-2022-22037, CVE-2022-22041, CVE-2022-22045, CVE-2022-22047, CVE-2022-22049, CVE-2022-22050, CVE-2022-30202, CVE-2022-30205, CVE-2022-30206, CVE-2022-30209, CVE-2022-30215, CVE-2022-30220, CVE-2022-30224, CVE-2022-30225, CVE-2022-30226)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.0, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.8, "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 6.0}, "published": "2022-07-12T00:00:00", "type": "nessus", "title": "KB5015807: Windows 10 Version 20H2 / 21H1 / 21H2 Security Update (July 2022)", "bulletinFamily": "scanner", "cvss2": {"severity": "HIGH", "exploitabilityScore": 6.8, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "COMPLETE", "integrityImpact": "COMPLETE", "baseScore": 8.5, "vectorString": "AV:N/AC:M/Au:S/C:C/I:C/A:C", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 10.0, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-21845", "CVE-2022-22022", "CVE-2022-22023", "CVE-2022-22024", "CVE-2022-22025", "CVE-2022-22026", "CVE-2022-22027", "CVE-2022-22028", "CVE-2022-22029", "CVE-2022-22031", "CVE-2022-22034", "CVE-2022-22036", "CVE-2022-22037", "CVE-2022-22038", "CVE-2022-22039", "CVE-2022-22040", "CVE-2022-22041", "CVE-2022-22042", "CVE-2022-22043", "CVE-2022-22045", "CVE-2022-22047", "CVE-2022-22048", "CVE-2022-22049", "CVE-2022-22050", "CVE-2022-22711", "CVE-2022-27776", "CVE-2022-30202", "CVE-2022-30203", "CVE-2022-30205", "CVE-2022-30206", "CVE-2022-30208", "CVE-2022-30209", "CVE-2022-30211", "CVE-2022-30212", "CVE-2022-30213", "CVE-2022-30214", "CVE-2022-30215", "CVE-2022-30216", "CVE-2022-30220", "CVE-2022-30221", "CVE-2022-30222", "CVE-2022-30223", "CVE-2022-30224", "CVE-2022-30225", "CVE-2022-30226", "CVE-2022-33644"], "modified": "2023-01-16T00:00:00", "cpe": ["cpe:/o:microsoft:windows"], "id": "SMB_NT_MS22_JUL_5015807.NASL", "href": "https://www.tenable.com/plugins/nessus/163048", "sourceData": "##\n# (C) Tenable, Inc.\n\n#\n# The descriptive text and package checks in this plugin were\n# extracted from the Microsoft Security Updates API. The text\n# itself is copyright (C) Microsoft Corporation.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(163048);\n script_version(\"1.12\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/01/16\");\n\n script_cve_id(\n \"CVE-2022-21845\",\n \"CVE-2022-22022\",\n \"CVE-2022-22023\",\n \"CVE-2022-22024\",\n \"CVE-2022-22025\",\n \"CVE-2022-22026\",\n \"CVE-2022-22027\",\n \"CVE-2022-22028\",\n \"CVE-2022-22029\",\n \"CVE-2022-22031\",\n \"CVE-2022-22034\",\n \"CVE-2022-22036\",\n \"CVE-2022-22037\",\n \"CVE-2022-22038\",\n \"CVE-2022-22039\",\n \"CVE-2022-22040\",\n \"CVE-2022-22041\",\n \"CVE-2022-22042\",\n \"CVE-2022-22043\",\n \"CVE-2022-22045\",\n \"CVE-2022-22047\",\n \"CVE-2022-22048\",\n \"CVE-2022-22049\",\n \"CVE-2022-22050\",\n \"CVE-2022-22711\",\n \"CVE-2022-27776\",\n \"CVE-2022-30202\",\n \"CVE-2022-30203\",\n \"CVE-2022-30205\",\n \"CVE-2022-30206\",\n \"CVE-2022-30208\",\n \"CVE-2022-30209\",\n \"CVE-2022-30211\",\n \"CVE-2022-30212\",\n \"CVE-2022-30213\",\n \"CVE-2022-30214\",\n \"CVE-2022-30215\",\n \"CVE-2022-30216\",\n \"CVE-2022-30220\",\n \"CVE-2022-30221\",\n \"CVE-2022-30222\",\n \"CVE-2022-30223\",\n \"CVE-2022-30224\",\n \"CVE-2022-30225\",\n \"CVE-2022-30226\",\n \"CVE-2022-33644\"\n );\n script_xref(name:\"MSKB\", value:\"5015807\");\n script_xref(name:\"MSFT\", value:\"MS22-5015807\");\n script_xref(name:\"CISA-KNOWN-EXPLOITED\", value:\"2022/08/02\");\n script_xref(name:\"IAVA\", value:\"2022-A-0272-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0273-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"KB5015807: Windows 10 Version 20H2 / 21H1 / 21H2 Security Update (July 2022)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Windows host is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Windows host is missing security update 5015807. It is, therefore, affected by multiple vulnerabilities:\n\n - A remote code execution vulnerability. An attacker can\n exploit this to bypass authentication and execute\n unauthorized arbitrary commands. (CVE-2022-22024,\n CVE-2022-22027, CVE-2022-22029, CVE-2022-22038,\n CVE-2022-22039, CVE-2022-30211, CVE-2022-30214,\n CVE-2022-30221, CVE-2022-30222)\n\n - A security feature bypass vulnerability exists. An\n attacker can exploit this and bypass the security\n feature and perform unauthorized actions compromising\n the integrity of the system/application.\n (CVE-2022-22023, CVE-2022-22048, CVE-2022-30203)\n\n - An elevation of privilege vulnerability. An attacker can\n exploit this to gain elevated privileges.\n (CVE-2022-22022, CVE-2022-22026, CVE-2022-22031,\n CVE-2022-22034, CVE-2022-22036, CVE-2022-22037,\n CVE-2022-22041, CVE-2022-22045, CVE-2022-22047,\n CVE-2022-22049, CVE-2022-22050, CVE-2022-30202,\n CVE-2022-30205, CVE-2022-30206, CVE-2022-30209,\n CVE-2022-30215, CVE-2022-30220, CVE-2022-30224,\n CVE-2022-30225, CVE-2022-30226)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://support.microsoft.com/en-us/help/5015807\");\n script_set_attribute(attribute:\"see_also\", value:\"https://support.microsoft.com/help/5015807\");\n script_set_attribute(attribute:\"solution\", value:\n\"Apply Security Update 5015807\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:M/Au:S/C:C/I:C/A:C\");\n script_set_cvss_temporal_vector(\"CVSS2#E:H/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:H/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-30215\");\n script_set_attribute(attribute:\"cvss3_score_source\", value:\"CVE-2022-30221\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"Exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"true\");\n script_set_attribute(attribute:\"exploit_framework_core\", value:\"true\");\n script_set_attribute(attribute:\"exploited_by_malware\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/05/04\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/12\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:microsoft:windows\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Windows : Microsoft Bulletins\");\n\n script_copyright(english:\"This script is Copyright (C) 2022-2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"smb_check_rollup.nasl\", \"smb_hotfixes.nasl\", \"ms_bulletin_checks_possible.nasl\");\n script_require_keys(\"SMB/MS_Bulletin_Checks/Possible\");\n script_require_ports(139, 445, \"Host/patch_management_checks\");\n\n exit(0);\n}\n\ninclude('smb_func.inc');\ninclude('smb_hotfixes.inc');\ninclude('smb_hotfixes_fcheck.inc');\ninclude('smb_reg_query.inc');\n\nget_kb_item_or_exit('SMB/MS_Bulletin_Checks/Possible');\n\nbulletin = 'MS22-07';\nkbs = make_list(\n '5015807'\n);\n\nif (get_kb_item('Host/patch_management_checks')) hotfix_check_3rd_party(bulletin:bulletin, kbs:kbs, severity:SECURITY_HOLE);\n\nget_kb_item_or_exit('SMB/Registry/Enumerated');\nget_kb_item_or_exit('SMB/WindowsVersion', exit_code:1);\n\nif (hotfix_check_sp_range(win10:'0') <= 0) audit(AUDIT_OS_SP_NOT_VULN);\n\nvar share = hotfix_get_systemdrive(as_share:TRUE, exit_on_fail:TRUE);\nif (!is_accessible_share(share:share)) audit(AUDIT_SHARE_FAIL, share);\n\nvar os_name = get_kb_item(\"SMB/ProductName\");\n\nif (\n ( (\"enterprise\" >< tolower(os_name) || \"education\" >< tolower(os_name))\n &&\n smb_check_rollup(os:'10',\n os_build:19042,\n rollup_date:'07_2022',\n bulletin:bulletin,\n rollup_kb_list:[5015807]) \n )\n ||\n smb_check_rollup(os:'10',\n os_build:19043,\n rollup_date:'07_2022',\n bulletin:bulletin,\n rollup_kb_list:[5015807])\n || \n smb_check_rollup(os:'10',\n os_build:19044,\n rollup_date:'07_2022',\n bulletin:bulletin,\n rollup_kb_list:[5015807])\n)\n{\n replace_kb_item(name:'SMB/Missing/'+bulletin, value:TRUE);\n hotfix_security_hole();\n hotfix_check_fversion_end();\n exit(0);\n}\nelse\n{\n hotfix_check_fversion_end();\n audit(AUDIT_HOST_NOT, hotfix_get_audit_report());\n}\n", "cvss": {"score": 8.5, "vector": "AV:N/AC:M/Au:S/C:C/I:C/A:C"}}, {"lastseen": "2023-03-14T22:27:31", "description": "The remote Windows host is missing security update 5015827. It is, therefore, affected by multiple vulnerabilities:\n\n - An elevation of privilege vulnerability. An attacker can exploit this to gain elevated privileges.\n (CVE-2022-22022, CVE-2022-22026, CVE-2022-22031, CVE-2022-22034, CVE-2022-22036, CVE-2022-22037, CVE-2022-22041, CVE-2022-22045, CVE-2022-22047, CVE-2022-22049, CVE-2022-22050, CVE-2022-30202, CVE-2022-30205, CVE-2022-30206, CVE-2022-30209, CVE-2022-30220, CVE-2022-30224, CVE-2022-30225, CVE-2022-30226)\n\n - A security feature bypass vulnerability exists. An attacker can exploit this and bypass the security feature and perform unauthorized actions compromising the integrity of the system/application.\n (CVE-2022-22023, CVE-2022-22048, CVE-2022-30203)\n\n - A remote code execution vulnerability. An attacker can exploit this to bypass authentication and execute unauthorized arbitrary commands. (CVE-2022-22024, CVE-2022-22027, CVE-2022-22038, CVE-2022-30211, CVE-2022-30221, CVE-2022-30222)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.", "cvss3": {"exploitabilityScore": 2.0, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "CHANGED", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.8, "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 6.0}, "published": "2022-07-12T00:00:00", "type": "nessus", "title": "KB5015827: Windows Server 2022 Security Update (July 2022)", "bulletinFamily": "scanner", "cvss2": {"severity": "HIGH", "exploitabilityScore": 6.8, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "COMPLETE", "availabilityImpact": "COMPLETE", "integrityImpact": "COMPLETE", "baseScore": 8.5, "vectorString": "AV:N/AC:M/Au:S/C:C/I:C/A:C", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 10.0, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-21845", "CVE-2022-22022", "CVE-2022-22023", "CVE-2022-22024", "CVE-2022-22025", "CVE-2022-22026", "CVE-2022-22027", "CVE-2022-22028", "CVE-2022-22029", "CVE-2022-22031", "CVE-2022-22034", "CVE-2022-22036", "CVE-2022-22037", "CVE-2022-22038", "CVE-2022-22039", "CVE-2022-22040", "CVE-2022-22041", "CVE-2022-22042", "CVE-2022-22043", "CVE-2022-22045", "CVE-2022-22047", "CVE-2022-22048", "CVE-2022-22049", "CVE-2022-22050", "CVE-2022-22711", "CVE-2022-23816", "CVE-2022-23825", "CVE-2022-27776", "CVE-2022-30202", "CVE-2022-30203", "CVE-2022-30205", "CVE-2022-30206", "CVE-2022-30208", "CVE-2022-30209", "CVE-2022-30211", "CVE-2022-30212", "CVE-2022-30213", "CVE-2022-30214", "CVE-2022-30215", "CVE-2022-30216", "CVE-2022-30220", "CVE-2022-30221", "CVE-2022-30222", "CVE-2022-30223", "CVE-2022-30224", "CVE-2022-30225", "CVE-2022-30226"], "modified": "2023-01-16T00:00:00", "cpe": ["cpe:/o:microsoft:windows"], "id": "SMB_NT_MS22_JUL_5015827.NASL", "href": "https://www.tenable.com/plugins/nessus/163045", "sourceData": "##\n# (C) Tenable, Inc.\n##\n\ninclude('compat.inc');\n\nif (description)\n{\n script_id(163045);\n script_version(\"1.10\");\n script_set_attribute(attribute:\"plugin_modification_date\", value:\"2023/01/16\");\n\n script_cve_id(\n \"CVE-2022-21845\",\n \"CVE-2022-22022\",\n \"CVE-2022-22023\",\n \"CVE-2022-22024\",\n \"CVE-2022-22025\",\n \"CVE-2022-22026\",\n \"CVE-2022-22027\",\n \"CVE-2022-22028\",\n \"CVE-2022-22029\",\n \"CVE-2022-22031\",\n \"CVE-2022-22034\",\n \"CVE-2022-22036\",\n \"CVE-2022-22037\",\n \"CVE-2022-22038\",\n \"CVE-2022-22039\",\n \"CVE-2022-22040\",\n \"CVE-2022-22041\",\n \"CVE-2022-22042\",\n \"CVE-2022-22043\",\n \"CVE-2022-22045\",\n \"CVE-2022-22047\",\n \"CVE-2022-22048\",\n \"CVE-2022-22049\",\n \"CVE-2022-22050\",\n \"CVE-2022-22711\",\n \"CVE-2022-23816\",\n \"CVE-2022-23825\",\n \"CVE-2022-27776\",\n \"CVE-2022-30202\",\n \"CVE-2022-30203\",\n \"CVE-2022-30205\",\n \"CVE-2022-30206\",\n \"CVE-2022-30208\",\n \"CVE-2022-30209\",\n \"CVE-2022-30211\",\n \"CVE-2022-30212\",\n \"CVE-2022-30213\",\n \"CVE-2022-30214\",\n \"CVE-2022-30215\",\n \"CVE-2022-30216\",\n \"CVE-2022-30220\",\n \"CVE-2022-30221\",\n \"CVE-2022-30222\",\n \"CVE-2022-30223\",\n \"CVE-2022-30224\",\n \"CVE-2022-30225\",\n \"CVE-2022-30226\"\n );\n script_xref(name:\"MSKB\", value:\"5015827\");\n script_xref(name:\"MSFT\", value:\"MS22-5015827\");\n script_xref(name:\"CISA-KNOWN-EXPLOITED\", value:\"2022/08/02\");\n script_xref(name:\"IAVA\", value:\"2022-A-0272-S\");\n script_xref(name:\"IAVA\", value:\"2022-A-0273-S\");\n script_xref(name:\"CEA-ID\", value:\"CEA-2022-0026\");\n\n script_name(english:\"KB5015827: Windows Server 2022 Security Update (July 2022)\");\n\n script_set_attribute(attribute:\"synopsis\", value:\n\"The remote Windows host is affected by multiple vulnerabilities.\");\n script_set_attribute(attribute:\"description\", value:\n\"The remote Windows host is missing security update 5015827. It is, therefore, affected by multiple vulnerabilities:\n\n - An elevation of privilege vulnerability. An attacker can\n exploit this to gain elevated privileges.\n (CVE-2022-22022, CVE-2022-22026, CVE-2022-22031,\n CVE-2022-22034, CVE-2022-22036, CVE-2022-22037,\n CVE-2022-22041, CVE-2022-22045, CVE-2022-22047,\n CVE-2022-22049, CVE-2022-22050, CVE-2022-30202,\n CVE-2022-30205, CVE-2022-30206, CVE-2022-30209,\n CVE-2022-30220, CVE-2022-30224, CVE-2022-30225,\n CVE-2022-30226)\n\n - A security feature bypass vulnerability exists. An\n attacker can exploit this and bypass the security\n feature and perform unauthorized actions compromising\n the integrity of the system/application.\n (CVE-2022-22023, CVE-2022-22048, CVE-2022-30203)\n\n - A remote code execution vulnerability. An attacker can\n exploit this to bypass authentication and execute\n unauthorized arbitrary commands. (CVE-2022-22024,\n CVE-2022-22027, CVE-2022-22038, CVE-2022-30211,\n CVE-2022-30221, CVE-2022-30222)\n\nNote that Nessus has not tested for these issues but has instead relied only on the application's self-reported version\nnumber.\");\n script_set_attribute(attribute:\"see_also\", value:\"https://support.microsoft.com/en-us/help/5015827\");\n script_set_attribute(attribute:\"see_also\", value:\"https://support.microsoft.com/help/5015827\");\n script_set_attribute(attribute:\"solution\", value:\n\"Apply Security Update 5015827\");\n script_set_cvss_base_vector(\"CVSS2#AV:N/AC:L/Au:S/C:C/I:C/A:C\");\n script_set_cvss_temporal_vector(\"CVSS2#E:H/RL:OF/RC:C\");\n script_set_cvss3_base_vector(\"CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H\");\n script_set_cvss3_temporal_vector(\"CVSS:3.0/E:H/RL:O/RC:C\");\n script_set_attribute(attribute:\"cvss_score_source\", value:\"CVE-2022-22041\");\n script_set_attribute(attribute:\"cvss3_score_source\", value:\"CVE-2022-30221\");\n\n script_set_attribute(attribute:\"exploitability_ease\", value:\"Exploits are available\");\n script_set_attribute(attribute:\"exploit_available\", value:\"true\");\n script_set_attribute(attribute:\"exploit_framework_core\", value:\"true\");\n script_set_attribute(attribute:\"exploited_by_malware\", value:\"true\");\n\n script_set_attribute(attribute:\"vuln_publication_date\", value:\"2022/05/04\");\n script_set_attribute(attribute:\"patch_publication_date\", value:\"2022/07/12\");\n script_set_attribute(attribute:\"plugin_publication_date\", value:\"2022/07/12\");\n\n script_set_attribute(attribute:\"plugin_type\", value:\"local\");\n script_set_attribute(attribute:\"cpe\", value:\"cpe:/o:microsoft:windows\");\n script_set_attribute(attribute:\"stig_severity\", value:\"I\");\n script_end_attributes();\n\n script_category(ACT_GATHER_INFO);\n script_family(english:\"Windows : Microsoft Bulletins\");\n\n script_copyright(english:\"This script is Copyright (C) 2022-2023 and is owned by Tenable, Inc. or an Affiliate thereof.\");\n\n script_dependencies(\"smb_check_rollup.nasl\", \"smb_hotfixes.nasl\", \"ms_bulletin_checks_possible.nasl\");\n script_require_keys(\"SMB/MS_Bulletin_Checks/Possible\");\n script_require_ports(139, 445, \"Host/patch_management_checks\");\n\n exit(0);\n}\n\ninclude('smb_func.inc');\ninclude('smb_hotfixes.inc');\ninclude('smb_hotfixes_fcheck.inc');\ninclude('smb_reg_query.inc');\n\nget_kb_item_or_exit('SMB/MS_Bulletin_Checks/Possible');\n\nbulletin = 'MS22-07';\nkbs = make_list(\n '5015827'\n);\n\nif (get_kb_item('Host/patch_management_checks')) hotfix_check_3rd_party(bulletin:bulletin, kbs:kbs, severity:SECURITY_HOLE);\n\nget_kb_item_or_exit('SMB/Registry/Enumerated');\nget_kb_item_or_exit('SMB/WindowsVersion', exit_code:1);\n\nif (hotfix_check_sp_range(win10:'0') <= 0) audit(AUDIT_OS_SP_NOT_VULN);\n\nshare = hotfix_get_systemdrive(as_share:TRUE, exit_on_fail:TRUE);\nif (!is_accessible_share(share:share)) audit(AUDIT_SHARE_FAIL, share);\n\nif (\n smb_check_rollup(os:'10',\n os_build:20348,\n rollup_date:'07_2022',\n bulletin:bulletin,\n rollup_kb_list:[5015827])\n)\n{\n replace_kb_item(name:'SMB/Missing/'+bulletin, value:TRUE);\n hotfix_security_hole();\n hotfix_check_fversion_end();\n exit(0);\n}\nelse\n{\n hotfix_check_fversion_end();\n audit(AUDIT_HOST_NOT, hotfix_get_audit_report());\n}\n", "cvss": {"score": 8.5, "vector": "AV:N/AC:M/Au:S/C:C/I:C/A:C"}}], "fedora": [{"lastseen": "2022-06-08T17:21:34", "description": "curl is a command line tool for transferring data with URL syntax, supporti ng FTP, FTPS, HTTP, HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS, FILE, I MAP, SMTP, POP3 and RTSP. curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a busload of other useful tricks. ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-05-07T05:15:01", "type": "fedora", "title": "[SECURITY] Fedora 36 Update: curl-7.82.0-4.fc36", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-05-07T05:15:01", "id": "FEDORA:A7E93304CBA6", "href": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/thread/FGGBHB34T3E5GSKOPUV6VEC7KOZNZAXY/", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2022-06-08T17:21:34", "description": "curl is a command line tool for transferring data with URL syntax, supporti ng FTP, FTPS, HTTP, HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS, FILE, I MAP, SMTP, POP3 and RTSP. curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a busload of other useful tricks. ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-05-18T01:11:50", "type": "fedora", "title": "[SECURITY] Fedora 35 Update: curl-7.79.1-4.fc35", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-27782"], "modified": "2022-05-18T01:11:50", "id": "FEDORA:BC4BB309CBB9", "href": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/thread/WMOINW6EBEW5GRNVVPOYYFGG6Z6RBVZT/", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2022-06-08T17:21:34", "description": "curl is a command line tool for transferring data with URL syntax, supporti ng FTP, FTPS, HTTP, HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS, FILE, I MAP, SMTP, POP3 and RTSP. curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a busload of other useful tricks. ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-05-24T01:41:08", "type": "fedora", "title": "[SECURITY] Fedora 34 Update: curl-7.76.1-16.fc34", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-27782"], "modified": "2022-05-24T01:41:08", "id": "FEDORA:DACF730A226B", "href": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/thread/VX5A43F5VF3KNPLUMKA3EWB4SECWLU7G/", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2022-09-13T00:17:55", "description": "MediaWiki is the software used for Wikipedia and the other Wikimedia Foundation websites. Compared to other wikis, it has an excellent range of features and support for high-traffic websites using multiple servers This package supports wiki farms. Read the instructions for creating wiki instances under /usr/share/doc/mediawiki/README.RPM. Remember to remove the config dir after completing the configuration. ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "NONE", "baseScore": 6.5, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N", "version": "3.1", "userInteraction": "REQUIRED"}, "impactScore": 3.6}, "published": "2022-09-12T17:57:50", "type": "fedora", "title": "[SECURITY] Fedora 37 Update: mediawiki-1.38.2-1.fc37", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.6, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.3, "vectorString": "AV:N/AC:M/Au:N/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27776", "CVE-2022-34911", "CVE-2022-34912"], "modified": "2022-09-12T17:57:50", "id": "FEDORA:7F64F306F2CA", "href": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/thread/DKKOQXPYLMBSEVDHFS32BPBR3ZQJKY5B/", "cvss": {"score": 4.3, "vector": "AV:N/AC:M/Au:N/C:P/I:N/A:N"}}], "ubuntu": [{"lastseen": "2023-01-26T15:13:49", "description": "## Releases\n\n * Ubuntu 22.04 LTS\n * Ubuntu 21.10 \n * Ubuntu 20.04 LTS\n * Ubuntu 18.04 LTS\n\n## Packages\n\n * curl \\- HTTP, HTTPS, and FTP client and client libraries\n\nPatrick Monnerat discovered that curl incorrectly handled certain OAUTH2. \nAn attacker could possibly use this issue to access sensitive information. \n(CVE-2022-22576)\n\nHarry Sintonen discovered that curl incorrectly handled certain requests. \nAn attacker could possibly use this issue to expose sensitive information. \n(CVE-2022-27774, CVE-2022-27775, CVE-2022-27776)\n", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-04-28T00:00:00", "type": "ubuntu", "title": "curl vulnerabilities", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-04-28T00:00:00", "id": "USN-5397-1", "href": "https://ubuntu.com/security/notices/USN-5397-1", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}], "cloudfoundry": [{"lastseen": "2022-06-08T17:11:47", "description": "# \n\n## Severity\n\nMedium\n\n## Vendor\n\nCanonical Ubuntu\n\n## Versions Affected\n\n * Canonical Ubuntu 18.04\n\n## Description\n\nPatrick Monnerat discovered that curl incorrectly handled certain OAUTH2. An attacker could possibly use this issue to access sensitive information. (CVE-2022-22576) Harry Sintonen discovered that curl incorrectly handled certain requests. An attacker could possibly use this issue to expose sensitive information. (CVE-2022-27774, CVE-2022-27775, CVE-2022-27776) Update Instructions: Run `sudo ua fix USN-5397-1` to fix the vulnerability. The problem can be corrected by updating your system to the following package versions: libcurl4-gnutls-dev \u2013 7.68.0-1ubuntu2.10 libcurl4-openssl-dev \u2013 7.68.0-1ubuntu2.10 libcurl3-gnutls \u2013 7.68.0-1ubuntu2.10 libcurl4-doc \u2013 7.68.0-1ubuntu2.10 libcurl3-nss \u2013 7.68.0-1ubuntu2.10 libcurl4-nss-dev \u2013 7.68.0-1ubuntu2.10 libcurl4 \u2013 7.68.0-1ubuntu2.10 curl \u2013 7.68.0-1ubuntu2.10 No subscription required\n\nCVEs contained in this USN include: CVE-2022-22576, CVE-2022-27774, CVE-2022-27775, CVE-2022-27776.\n\n## Affected Cloud Foundry Products and Versions\n\n_Severity is medium unless otherwise noted._\n\n * Bionic Stemcells \n * 1.x versions prior to 1.84\n * All other stemcells not listed.\n * cflinuxfs3 \n * All versions prior to 0.291.0\n * CF Deployment \n * All versions\n\n## Mitigation\n\nUsers of affected products are strongly encouraged to follow the mitigations below.\n\nThe Cloud Foundry project recommends upgrading the following releases:\n\n * Bionic Stemcells \n * Upgrade 1.x versions to 1.84 or greater\n * All other stemcells should be upgraded to the latest version available on [bosh.io](<https://bosh.io/stemcells>).\n * cflinuxfs3 \n * Upgrade all versions to 0.291.0 or greater\n * CF Deployment \n * There are no fixed versions of this product\n\n## References\n\n * [USN Notice](<https://ubuntu.com/security/notices/USN-5397-1>)\n * [CVE-2022-22576](<https://ubuntu.com/security/CVE-2022-22576>)\n * [CVE-2022-27774](<https://ubuntu.com/security/CVE-2022-27774>)\n * [CVE-2022-27775](<https://ubuntu.com/security/CVE-2022-27775>)\n * [CVE-2022-27776](<https://ubuntu.com/security/CVE-2022-27776>)\n\n## History\n\n2022-05-23: Initial vulnerability report published.\n", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-05-23T00:00:00", "type": "cloudfoundry", "title": "USN-5397-1: curl vulnerabilities | Cloud Foundry", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-05-23T00:00:00", "id": "CFOUNDRY:ACC795AF933D0397156EB3730A4339A8", "href": "https://www.cloudfoundry.org/blog/usn-5397-1-curl-vulnerabilities/", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}], "amazon": [{"lastseen": "2023-02-08T17:30:38", "description": "**Issue Overview:**\n\nA vulnerability was found in curl. This security flaw allows reusing OAUTH2-authenticated connections without properly ensuring that the connection was authenticated with the same credentials set for this transfer. This issue leads to an authentication bypass, either by mistake or by a malicious actor. (CVE-2022-22576)\n\nA vulnerability was found in curl. This security flaw allows leaking credentials to other servers when it follows redirects from auth-protected HTTP(S) URLs to other protocols and port numbers. (CVE-2022-27774)\n\nA vulnerability was found in curl. This security flaw occurs due to errors in the logic where the config matching function did not take the IPv6 address zone id into account. This issue can lead to curl reusing the wrong connection when one transfer uses a zone id, and the subsequent transfer uses another. (CVE-2022-27775)\n\nA vulnerability was found in curl. This security flaw allows leak authentication or cookie header data on HTTP redirects to the same host but another port number. Sending the same set of headers to a server on a different port number is a problem for applications that pass on custom `Authorization:` or `Cookie:`headers. Those headers often contain privacy-sensitive information or data. (CVE-2022-27776)\n\n \n**Affected Packages:** \n\n\ncurl\n\n \n**Issue Correction:** \nRun _yum update curl_ to update your system. \n\n\n \n\n\n**New Packages:**\n \n \n aarch64: \n \u00a0\u00a0\u00a0 curl-7.79.1-2.amzn2.0.1.aarch64 \n \u00a0\u00a0\u00a0 libcurl-7.79.1-2.amzn2.0.1.aarch64 \n \u00a0\u00a0\u00a0 libcurl-devel-7.79.1-2.amzn2.0.1.aarch64 \n \u00a0\u00a0\u00a0 curl-debuginfo-7.79.1-2.amzn2.0.1.aarch64 \n \n i686: \n \u00a0\u00a0\u00a0 curl-7.79.1-2.amzn2.0.1.i686 \n \u00a0\u00a0\u00a0 libcurl-7.79.1-2.amzn2.0.1.i686 \n \u00a0\u00a0\u00a0 libcurl-devel-7.79.1-2.amzn2.0.1.i686 \n \u00a0\u00a0\u00a0 curl-debuginfo-7.79.1-2.amzn2.0.1.i686 \n \n src: \n \u00a0\u00a0\u00a0 curl-7.79.1-2.amzn2.0.1.src \n \n x86_64: \n \u00a0\u00a0\u00a0 curl-7.79.1-2.amzn2.0.1.x86_64 \n \u00a0\u00a0\u00a0 libcurl-7.79.1-2.amzn2.0.1.x86_64 \n \u00a0\u00a0\u00a0 libcurl-devel-7.79.1-2.amzn2.0.1.x86_64 \n \u00a0\u00a0\u00a0 curl-debuginfo-7.79.1-2.amzn2.0.1.x86_64 \n \n \n\n### Additional References\n\nRed Hat: [CVE-2022-22576](<https://access.redhat.com/security/cve/CVE-2022-22576>), [CVE-2022-27774](<https://access.redhat.com/security/cve/CVE-2022-27774>), [CVE-2022-27775](<https://access.redhat.com/security/cve/CVE-2022-27775>), [CVE-2022-27776](<https://access.redhat.com/security/cve/CVE-2022-27776>)\n\nMitre: [CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>), [CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>), [CVE-2022-27775](<https://vulners.com/cve/CVE-2022-27775>), [CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>)\n", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-05-04T01:01:00", "type": "amazon", "title": "Medium: curl", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-05-05T14:02:00", "id": "ALAS2-2022-1792", "href": "https://alas.aws.amazon.com/AL2/ALAS-2022-1792.html", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-02-08T17:07:35", "description": "**Issue Overview:**\n\nA vulnerability was found in curl. This security flaw allows reusing OAUTH2-authenticated connections without properly ensuring that the connection was authenticated with the same credentials set for this transfer. This issue leads to an authentication bypass, either by mistake or by a malicious actor. (CVE-2022-22576)\n\nA vulnerability was found in curl. This security flaw allows leaking credentials to other servers when it follows redirects from auth-protected HTTP(S) URLs to other protocols and port numbers. (CVE-2022-27774)\n\nA vulnerability was found in curl. This security flaw allows leak authentication or cookie header data on HTTP redirects to the same host but another port number. Sending the same set of headers to a server on a different port number is a problem for applications that pass on custom `Authorization:` or `Cookie:`headers. Those headers often contain privacy-sensitive information or data. (CVE-2022-27776)\n\nA vulnerability was found in curl. This issue occurs due to an erroneous function. A malicious server could make curl within Network Security Services (NSS) get stuck in a never-ending busy loop when trying to retrieve that information. This flaw allows an Infinite Loop, affecting system availability. (CVE-2022-27781)\n\nA vulnerability was found in curl. This issue occurs because curl can reuse a previously created connection even when a TLS or SSH-related option is changed that should have prohibited reuse. This flaw leads to an authentication bypass, either by mistake or by a malicious actor. (CVE-2022-27782)\n\nA vulnerability was found in curl. This issue occurs because the number of acceptable \"links\" in the \"decompression chain\" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps. This flaw leads to a denial of service, either by mistake or by a malicious actor. (CVE-2022-32206)\n\nA vulnerability was found in curl. This issue occurs because it mishandles message verification failures when curl does FTP transfers secured by krb5. This flaw makes it possible for a Man-in-the-middle attack to go unnoticed and allows data injection into the client. (CVE-2022-32208)\n\nA vulnerability found in curl. This security flaw happens when curl is used to retrieve and parse cookies from an HTTP(S) server, where it accepts cookies using control codes (byte values below 32), and also when cookies that contain such control codes are later sent back to an HTTP(S) server, possibly causing the server to return a 400 response. This issue effectively allows a \"sister site\" to deny service to siblings and cause a denial of service attack. (CVE-2022-35252)\n\n \n**Affected Packages:** \n\n\ncurl\n\n \n**Issue Correction:** \nRun _yum update curl_ to update your system. \n\n\n \n\n\n**New Packages:**\n \n \n i686: \n \u00a0\u00a0\u00a0 libcurl-7.61.1-12.101.amzn1.i686 \n \u00a0\u00a0\u00a0 curl-7.61.1-12.101.amzn1.i686 \n \u00a0\u00a0\u00a0 curl-debuginfo-7.61.1-12.101.amzn1.i686 \n \u00a0\u00a0\u00a0 libcurl-devel-7.61.1-12.101.amzn1.i686 \n \n src: \n \u00a0\u00a0\u00a0 curl-7.61.1-12.101.amzn1.src \n \n x86_64: \n \u00a0\u00a0\u00a0 libcurl-7.61.1-12.101.amzn1.x86_64 \n \u00a0\u00a0\u00a0 curl-debuginfo-7.61.1-12.101.amzn1.x86_64 \n \u00a0\u00a0\u00a0 curl-7.61.1-12.101.amzn1.x86_64 \n \u00a0\u00a0\u00a0 libcurl-devel-7.61.1-12.101.amzn1.x86_64 \n \n \n\n### Additional References\n\nRed Hat: [CVE-2022-22576](<https://access.redhat.com/security/cve/CVE-2022-22576>), [CVE-2022-27774](<https://access.redhat.com/security/cve/CVE-2022-27774>), [CVE-2022-27776](<https://access.redhat.com/security/cve/CVE-2022-27776>), [CVE-2022-27781](<https://access.redhat.com/security/cve/CVE-2022-27781>), [CVE-2022-27782](<https://access.redhat.com/security/cve/CVE-2022-27782>), [CVE-2022-32206](<https://access.redhat.com/security/cve/CVE-2022-32206>), [CVE-2022-32208](<https://access.redhat.com/security/cve/CVE-2022-32208>), [CVE-2022-35252](<https://access.redhat.com/security/cve/CVE-2022-35252>)\n\nMitre: [CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>), [CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>), [CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>), [CVE-2022-27781](<https://vulners.com/cve/CVE-2022-27781>), [CVE-2022-27782](<https://vulners.com/cve/CVE-2022-27782>), [CVE-2022-32206](<https://vulners.com/cve/CVE-2022-32206>), [CVE-2022-32208](<https://vulners.com/cve/CVE-2022-32208>), [CVE-2022-35252](<https://vulners.com/cve/CVE-2022-35252>)\n", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-12-01T17:33:00", "type": "amazon", "title": "Medium: curl", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27781", "CVE-2022-27782", "CVE-2022-32206", "CVE-2022-32208", "CVE-2022-35252"], "modified": "2022-12-10T00:44:00", "id": "ALAS-2022-1646", "href": "https://alas.aws.amazon.com/ALAS-2022-1646.html", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}], "freebsd": [{"lastseen": "2022-06-08T17:31:52", "description": "\n\nThe cURL project reports:\n\n\nOAUTH2 bearer bypass in connection re-use (CVE-2022-22576)\nCredential leak on redirect (CVE-2022-27774)\nBad local IPv6 connection reuse (CVE-2022-27775)\nAuth/cookie leak on redirect (CVE-2022-27776)\n\n\n\n", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-04-27T00:00:00", "type": "freebsd", "title": "cURL -- Multiple vulnerabilities", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-04-27T00:00:00", "id": "92A4D881-C6CF-11EC-A06F-D4C9EF517024", "href": "https://vuxml.freebsd.org/freebsd/92a4d881-c6cf-11ec-a06f-d4c9ef517024.html", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2022-07-03T20:14:40", "description": "\n\nMediawiki reports:\n\n(T308471) Username is not escaped in the \"welcomeuser\" message.\n(T308473) Username not escaped in the contributions-title message.\n(T309377, CVE-2022-29248) Update \"guzzlehttp/guzzle\" to version 6.5.6.\n(T311384, CVE-2022-27776) Update \"guzzlehttp/guzzle\" to 6.5.8/7.4.5.\n\n\n", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "REQUIRED"}, "impactScore": 5.2}, "published": "2022-05-16T00:00:00", "type": "freebsd", "title": "mediawiki -- multiple vulnerabilities", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.6, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.8, "vectorString": "AV:N/AC:M/Au:N/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27776", "CVE-2022-29248"], "modified": "2022-05-16T00:00:00", "id": "5AB54EA0-FA94-11EC-996C-080027B24E86", "href": "https://vuxml.freebsd.org/freebsd/5ab54ea0-fa94-11ec-996c-080027b24e86.html", "cvss": {"score": 5.8, "vector": "AV:N/AC:M/Au:N/C:P/I:P/A:N"}}], "slackware": [{"lastseen": "2023-02-08T16:14:06", "description": "New curl packages are available for Slackware 14.0, 14.1, 14.2, 15.0,\nand -current to fix security issues.\n\n\nHere are the details from the Slackware 15.0 ChangeLog:\n\npatches/packages/curl-7.83.0-i586-1_slack15.0.txz: Upgraded.\n This update fixes security issues:\n OAUTH2 bearer bypass in connection re-use.\n Credential leak on redirect.\n Bad local IPv6 connection reuse.\n Auth/cookie leak on redirect.\n For more information, see:\n https://curl.se/docs/CVE-2022-22576.html\n https://curl.se/docs/CVE-2022-27774.html\n https://curl.se/docs/CVE-2022-27775.html\n https://curl.se/docs/CVE-2022-27776.html\n https://vulners.com/cve/CVE-2022-22576\n https://vulners.com/cve/CVE-2022-27774\n https://vulners.com/cve/CVE-2022-27775\n https://vulners.com/cve/CVE-2022-27776\n (* Security fix *)\n\nWhere to find the new packages:\n\nThanks to the friendly folks at the OSU Open Source Lab\n(http://osuosl.org) for donating FTP and rsync hosting\nto the Slackware project! :-)\n\nAlso see the \"Get Slack\" section on http://slackware.com for\nadditional mirror sites near you.\n\nUpdated package for Slackware 14.0:\nftp://ftp.slackware.com/pub/slackware/slackware-14.0/patches/packages/curl-7.83.0-i486-1_slack14.0.txz\n\nUpdated package for Slackware x86_64 14.0:\nftp://ftp.slackware.com/pub/slackware/slackware64-14.0/patches/packages/curl-7.83.0-x86_64-1_slack14.0.txz\n\nUpdated package for Slackware 14.1:\nftp://ftp.slackware.com/pub/slackware/slackware-14.1/patches/packages/curl-7.83.0-i486-1_slack14.1.txz\n\nUpdated package for Slackware x86_64 14.1:\nftp://ftp.slackware.com/pub/slackware/slackware64-14.1/patches/packages/curl-7.83.0-x86_64-1_slack14.1.txz\n\nUpdated package for Slackware 14.2:\nftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/curl-7.83.0-i586-1_slack14.2.txz\n\nUpdated package for Slackware x86_64 14.2:\nftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/curl-7.83.0-x86_64-1_slack14.2.txz\n\nUpdated package for Slackware 15.0:\nftp://ftp.slackware.com/pub/slackware/slackware-15.0/patches/packages/curl-7.83.0-i586-1_slack15.0.txz\n\nUpdated package for Slackware x86_64 15.0:\nftp://ftp.slackware.com/pub/slackware/slackware64-15.0/patches/packages/curl-7.83.0-x86_64-1_slack15.0.txz\n\nUpdated package for Slackware -current:\nftp://ftp.slackware.com/pub/slackware/slackware-current/slackware/n/curl-7.83.0-i586-1.txz\n\nUpdated package for Slackware x86_64 -current:\nftp://ftp.slackware.com/pub/slackware/slackware64-current/slackware64/n/curl-7.83.0-x86_64-1.txz\n\n\nMD5 signatures:\n\nSlackware 14.0 package:\n607b20f1371350e8f7593018cc238913 curl-7.83.0-i486-1_slack14.0.txz\n\nSlackware x86_64 14.0 package:\nb5ad2b55e38ff8b3aeb5c90393e418c6 curl-7.83.0-x86_64-1_slack14.0.txz\n\nSlackware 14.1 package:\n00e82861084a0786a7f68b22967a8c1e curl-7.83.0-i486-1_slack14.1.txz\n\nSlackware x86_64 14.1 package:\ne125ccdc37ac93e6dda401804b68d920 curl-7.83.0-x86_64-1_slack14.1.txz\n\nSlackware 14.2 package:\n0b4718eb4fe11d2bf332ba2ec2ac2a7d curl-7.83.0-i586-1_slack14.2.txz\n\nSlackware x86_64 14.2 package:\n9352461a4f1474e0595e9fd059b72825 curl-7.83.0-x86_64-1_slack14.2.txz\n\nSlackware 15.0 package:\n553edba4be92fac1a49385c00cc523d0 curl-7.83.0-i586-1_slack15.0.txz\n\nSlackware x86_64 15.0 package:\n63728de433fd85551d330a170a9293fb curl-7.83.0-x86_64-1_slack15.0.txz\n\nSlackware -current package:\n85ee2ff366110682670227d31bc7b178 n/curl-7.83.0-i586-1.txz\n\nSlackware x86_64 -current package:\nc8fa7d26aac235ab9d6a49778b7fa6b1 n/curl-7.83.0-x86_64-1.txz\n\n\nInstallation instructions:\n\nUpgrade the package as root:\n > upgradepkg curl-7.83.0-i586-1_slack15.0.txz", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-04-27T21:48:34", "type": "slackware", "title": "[slackware-security] curl", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-04-27T21:48:34", "id": "SSA-2022-117-01", "href": "http://www.slackware.com/security/viewer.php?l=slackware-security&y=2022&m=slackware-security.488232", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}], "suse": [{"lastseen": "2022-11-06T19:34:05", "description": "An update that fixes three vulnerabilities is now available.\n\nDescription:\n\n This update for curl fixes the following issues:\n\n - CVE-2022-27776: Fixed auth/cookie leak on redirect (bsc#1198766)\n - CVE-2022-27775: Fixed bad local IPv6 connection reuse (bsc#1198723)\n - CVE-2022-22576: Fixed OAUTH2 bearer bypass in connection re-use\n (bsc#1198614)\n\n\nPatch Instructions:\n\n To install this SUSE Security Update use the SUSE recommended installation methods\n like YaST online_update or \"zypper patch\".\n\n Alternatively you can run the command listed for your product:\n\n - openSUSE Leap 15.3:\n\n zypper in -t patch openSUSE-SLE-15.3-2022-1657=1\n\n - SUSE Linux Enterprise Module for Basesystem 15-SP3:\n\n zypper in -t patch SUSE-SLE-Module-Basesystem-15-SP3-2022-1657=1\n\n - SUSE Linux Enterprise Micro 5.2:\n\n zypper in -t patch SUSE-SUSE-MicroOS-5.2-2022-1657=1\n\n - SUSE Linux Enterprise Micro 5.1:\n\n zypper in -t patch SUSE-SUSE-MicroOS-5.1-2022-1657=1", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-05-13T00:00:00", "type": "suse", "title": "Security update for curl (moderate)", "bulletinFamily": "unix", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-05-13T00:00:00", "id": "SUSE-SU-2022:1657-1", "href": "https://lists.opensuse.org/archives/list/security-announce@lists.opensuse.org/thread/YNKI4UFYWVL5W5EF7KBGTSZ5EB5PPLH5/", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}], "ibm": [{"lastseen": "2023-02-13T01:33:32", "description": "## Summary\n\nThis Security Bulletin addresses security vulnerabilities that have been remediated in IBM Aspera High-Speed Transfer Server 4.4.1 and Aspera High-Speed Transfer Endpoint 4.4.1 \n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-27775](<https://vulners.com/cve/CVE-2022-27775>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a logic error in the config matching function. By sending a specially-crafted request using IPv6, an attacker could exploit this vulnerability to cause libcurl to reuse the wrong connection to obtain sensitive information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225295](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225295>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)\n\n## Affected Products and Versions\n\nIBM Aspera High-Speed Transfer Server 4.4.0 and earlier \nIBM Aspera High-Speed Transfer Endpoint 4.4.0 and earlier\n\n \n\n\n## Remediation/Fixes\n\nThe fix for this set of vulnerabilities was delivered in IBM Aspera High-Speed Transfer Server V4.4.1 and IBM Aspera High-Speed Transfer Endpoint V4.4.1. The recommended solution is to apply the fix as soon as possible: \n\n**Product(s)**| **Fixing VRM**| **Platform**| **Link to Fix** \n---|---|---|--- \nIBM Aspera High-Speed Transfer Server| \n\n4.4.1 \n\n| AIX| [click here](<https://www.ibm.com/support/fixcentral/swg/downloadFixes?parent=ibm%7EOther%20software&product=ibm/Other+software/IBM+Aspera+Faspex+Server&release=All&platform=All&function=fixId&fixids=IBM_Aspera_Faspex_4.4.1_Linux_Patch_Level_12&includeRequisites=1&includeSupersedes=0&downloadMethod=http> \"click here\" ) \nIBM Aspera High-Speed Transfer Server| \n\n4.4.1 \n\n| Linux| [click here](<http://www.ibm.com/support/fixcentral/quickorder?fixids=ibm-aspera-hsts-4.4.1.1_patch_for_asperatrapd&product=ibm%2FOther%20software%2FIBM%20Aspera%20High-Speed%20Transfer%20Server&source=dbluesearch&mhsrc=ibmsearch_a&mhq=aspera%20high%20speed%204%26period%3B4%26period%3B1> \"click here\" ) \nIBM Aspera High-Speed Transfer Server| \n\n4.4.1 \n\n| Linux PPC| [click here](<http://www.ibm.com/support/fixcentral/quickorder?fixids=ibm-aspera-hsts-4.4.1.96-linux-ppc64le-release&product=ibm%2FOther%20software%2FIBM%20Aspera%20High-Speed%20Transfer%20Server&source=dbluesearch&mhsrc=ibmsearch_a&mhq=aspera%20high%20speed%204%26period%3B4%26period%3B1> \"click here\" ) \nIBM Aspera High-Speed Transfer Server| \n\n4.4.1 \n\n| Linux zSeries| [click here](<http://www.ibm.com/support/fixcentral/quickorder?fixids=ibm-aspera-hsts-4.4.1.101-linux-s390-release&product=ibm%2FOther%20software%2FIBM%20Aspera%20High-Speed%20Transfer%20Server&source=dbluesearch&mhsrc=ibmsearch_a&mhq=aspera%20high%20speed%204%26period%3B4%26period%3B1> \"click here\" ) \nIBM Aspera High-Speed Transfer Server| \n\n4.4.1 \n\n| Mac OSX| [click here](<http://www.ibm.com/support/fixcentral/quickorder?fixids=IBMAsperaHighSpeedTransferServer-4.4.1.37-mac-10.15-64-release&product=ibm%2FOther%20software%2FIBM%20Aspera%20High-Speed%20Transfer%20Server&source=dbluesearch&mhsrc=ibmsearch_a&mhq=aspera%20high%20speed%204%26period%3B4%26period%3B1> \"click here\" ) \nIBM Aspera High-Speed Transfer Server| \n\n4.4.1 \n\n| Windows| [click here](<http://www.ibm.com/support/fixcentral/quickorder?fixids=IBMAsperaHighSpeedTransferServer-ML-4.4.1.51-win-v142-64-release&product=ibm%2FOther%20software%2FIBM%20Aspera%20High-Speed%20Transfer%20Server&source=dbluesearch&mhsrc=ibmsearch_a&mhq=aspera%20high%20speed%204%26period%3B4%26period%3B1> \"click here\" ) \nIBM Aspera High-Speed Transfer Endpoint| \n\n4.4.1 \n\n| AIX| [click here](<http://www.ibm.com/support/fixcentral/quickorder?fixids=ibm-aspera-hste-4.4.1.23-aix-7.1-ppc64-release&product=ibm%2FOther%20software%2FIBM%20Aspera%20High-Speed%20Transfer%20Endpoint&source=dbluesearch&mhsrc=ibmsearch_a&mhq=aspera%20high%20speed%20v4%26period%3B4%26period%3B1> \"click here\" ) \nIBM Aspera High-Speed Transfer Endpoint| \n\n4.4.1 \n\n| Linux| [click here](<http://www.ibm.com/support/fixcentral/quickorder?fixids=ibm-aspera-hste-4.4.1.95-linux-64-release&product=ibm%2FOther%20software%2FIBM%20Aspera%20High-Speed%20Transfer%20Endpoint&source=dbluesearch&mhsrc=ibmsearch_a&mhq=aspera%20high%20speed%20v4%26period%3B4%26period%3B1> \"click here\" ) \nIBM Aspera High-Speed Transfer Endpoint| \n\n4.4.1 \n\n| Linux PPC| [click here](<http://www.ibm.com/support/fixcentral/quickorder?fixids=ibm-aspera-hste-4.4.1.96-linux-ppc64le-release&product=ibm%2FOther%20software%2FIBM%20Aspera%20High-Speed%20Transfer%20Endpoint&source=dbluesearch&mhsrc=ibmsearch_a&mhq=aspera%20high%20speed%20v4%26period%3B4%26period%3B1> \"click here\" ) \nIBM Aspera High-Speed Transfer Endpoint| \n\n4.4.1 \n\n| Linux zSeries| [click here](<http://www.ibm.com/support/fixcentral/quickorder?fixids=ibm-aspera-hste-4.4.1.101-linux-s390-release&product=ibm%2FOther%20software%2FIBM%20Aspera%20High-Speed%20Transfer%20Endpoint&source=dbluesearch&mhsrc=ibmsearch_a&mhq=aspera%20high%20speed%20v4%26period%3B4%26period%3B1> \"click here\" ) \nIBM Aspera High-Speed Transfer Endpoint| \n\n4.4.1 \n\n| Mac OSX| [click here](<http://www.ibm.com/support/fixcentral/quickorder?fixids=IBMAsperaHighSpeedTransferEndpoint-4.4.1.37-mac-10.15-64-release&product=ibm%2FOther%20software%2FIBM%20Aspera%20High-Speed%20Transfer%20Endpoint&source=dbluesearch&mhsrc=ibmsearch_a&mhq=aspera%20high%20speed%20v4%26period%3B4%26period%3B1> \"click here\" ) \nIBM Aspera High-Speed Transfer Endpoint| \n\n4.4.1 \n\n| Windows| [click here](<http://www.ibm.com/support/fixcentral/quickorder?fixids=IBMAsperaHighSpeedTransferEndpoint-ML-4.4.1.51-win-v142-64-release&product=ibm%2FOther%20software%2FIBM%20Aspera%20High-Speed%20Transfer%20Endpoint&source=dbluesearch&mhsrc=ibmsearch_a&mhq=aspera%20high%20speed%20v4%26period%3B4%26period%3B1> \"click here\" ) \n \n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "NONE", "baseScore": 7.5, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 3.6}, "published": "2023-02-02T16:36:32", "type": "ibm", "title": "Security Bulletin: IBM Aspera High-Speed Transfer Server and Aspera High-Speed Transfer Endpoint has addressed multiple security vulnerabilities (CVE-2022-27774, CVE-2022-27775, CVE-2022-27776)", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 5.0, "vectorString": "AV:N/AC:L/Au:N/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2023-02-02T16:36:32", "id": "95B6630FBA89FAC834A047D575BE828D2F65D8E01A39BBA3A8D9FDD126ED9C21", "href": "https://www.ibm.com/support/pages/node/6952301", "cvss": {"score": 5.0, "vector": "AV:N/AC:L/Au:N/C:P/I:N/A:N"}}, {"lastseen": "2023-02-28T01:40:38", "description": "## Summary\n\nVulnerabilities in libcurl such as bypassing security restrictions, obtaining sensitive information, and man-in-the-middle attacks may affect IBM Spectrum Protect Plus.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2021-22946](<https://vulners.com/cve/CVE-2021-22946>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a required TLS bypassed issue. By sniffing the network, an attacker could exploit this vulnerability to obtain sensitive data in clear text over the network, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/209452](<https://exchange.xforce.ibmcloud.com/vulnerabilities/209452>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-27782](<https://vulners.com/cve/CVE-2022-27782>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by an easy connection reuse flaw for TLS and SSH. By sending a specially-crafted request using the connections in a connection pool, an attacker could exploit this vulnerability to bypass access restrictions. \nCVSS Base score: 9.8 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226252](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226252>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H) \n \n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by improper authentication validation when reuse OAUTH2-authenticated connections. By sending a specially-crafted request using user + \"other OAUTH2 bearer\", an attacker could exploit this vulnerability to bypass access authentication validation. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225291](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225291>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2021-22947](<https://vulners.com/cve/CVE-2021-22947>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a man-in-the-middle attack, caused by a flaw when connecting to an IMAP, POP3, SMTP or FTP server to exchange data securely using STARTTLS to upgrade the connection to TLS level. An attacker could exploit this vulnerability to launch a man-in-the-middle attack and gain access to the communication channel between endpoints to obtain sensitive information or further compromise the system. \nCVSS Base score: 7.4 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/209453](<https://exchange.xforce.ibmcloud.com/vulnerabilities/209453>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N) \n \n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)\n\n## Affected Products and Versions\n\n**Affected Product(s)**| **Version(s)** \n---|--- \nIBM Spectrum Protect Plus| 10.1.0-10.1.11 \n \n\n\n## Remediation/Fixes\n\n**IBM Spectrum Protect \nPlus ****Affected Versions**| **Fixing \n****Level**| **Platform**| **Link to Fix and Instructions \n** \n---|---|---|--- \n10.1.0-10.1.11| 10.1.12| Linux| [** **](<https://www.ibm.com/support/pages/node/6579841> \"\" )**[https://www.ibm.com/support/pages/node/6603663](<https://www.ibm.com/support/pages/node/6603663> \"https://www.ibm.com/support/pages/node/6603663\" )** \n \n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-09-17T12:04:17", "type": "ibm", "title": "Security Bulletin: Vulnerabilities in libcurl may affect IBM Spectrum Protect Plus (CVE-2021-22946, CVE-2022-27782, CVE-2022-27774, CVE-2022-22576, CVE-2021-22947, CVE-2022-27776)", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2021-22946", "CVE-2021-22947", "CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27782"], "modified": "2022-09-17T12:04:17", "id": "2D3DC06839E79212C6976A32C9AF0E9350A0C2F6825BC56588D87941F357C252", "href": "https://www.ibm.com/support/pages/node/6620211", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-02-28T01:40:39", "description": "## Summary\n\nVulnerabilities in libcurl such as bypassing security restrictions, obtaining sensitive information, and man-in-the-middle attacks may affect IBM Spectrum Copy Data Management.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-27782](<https://vulners.com/cve/CVE-2022-27782>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by an easy connection reuse flaw for TLS and SSH. By sending a specially-crafted request using the connections in a connection pool, an attacker could exploit this vulnerability to bypass access restrictions. \nCVSS Base score: 9.8 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226252](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226252>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H) \n \n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2021-22947](<https://vulners.com/cve/CVE-2021-22947>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a man-in-the-middle attack, caused by a flaw when connecting to an IMAP, POP3, SMTP or FTP server to exchange data securely using STARTTLS to upgrade the connection to TLS level. An attacker could exploit this vulnerability to launch a man-in-the-middle attack and gain access to the communication channel between endpoints to obtain sensitive information or further compromise the system. \nCVSS Base score: 7.4 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/209453](<https://exchange.xforce.ibmcloud.com/vulnerabilities/209453>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N) \n \n** CVEID: **[CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by improper authentication validation when reuse OAUTH2-authenticated connections. By sending a specially-crafted request using user + \"other OAUTH2 bearer\", an attacker could exploit this vulnerability to bypass access authentication validation. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225291](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225291>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2021-22946](<https://vulners.com/cve/CVE-2021-22946>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a required TLS bypassed issue. By sniffing the network, an attacker could exploit this vulnerability to obtain sensitive data in clear text over the network, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/209452](<https://exchange.xforce.ibmcloud.com/vulnerabilities/209452>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)\n\n## Affected Products and Versions\n\n**Affected Product(s)**| **Version(s)** \n---|--- \nIBM Spectrum Copy Data Management| 2.2.0.0-2.2.16.0 \n \n\n\n## Remediation/Fixes\n\n**IBM Spectrum Copy Data Management** \n**Affected Versions**| **Fixing** \n**Level**| **Platform**| **Link to Fix and Instructions \n** \n---|---|---|--- \n2.2.0.0-2.2.16.0| 2.2.17| Linux| <https://www.ibm.com/support/pages/node/6615291> \n \n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-09-17T02:05:46", "type": "ibm", "title": "Security Bulletin: Vulnerabilities in libcurl may affect IBM Spectrum Copy Data Management (CVE-2022-27782, CVE-2022-27774, CVE-2021-22947, CVE-2022-22576, CVE-2022-27776, CVE-2021-22946)", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2021-22946", "CVE-2021-22947", "CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27782"], "modified": "2022-09-17T02:05:46", "id": "177FC3D2C27E098B63D88E6DE8DFBAF174F78910392D5DC199FFD090E0F5CDC5", "href": "https://www.ibm.com/support/pages/node/6620213", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-02-28T01:39:59", "description": "## Summary\n\nThere are multiple vulnerabilities in Curl that affect PowerSC.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-27775](<https://vulners.com/cve/CVE-2022-27775>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a logic error in the config matching function. By sending a specially-crafted request using IPv6, an attacker could exploit this vulnerability to cause libcurl to reuse the wrong connection to obtain sensitive information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225295](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225295>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-27781](<https://vulners.com/cve/CVE-2022-27781>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a denial of service, caused by a flaw in the CURLOPT_CERTINFO option. By persuading a victim to visit a specially-crafted Web site, a remote attacker could exploit this vulnerability to cause a never ending busy-loop when trying to retrieve certificate chain information. \nCVSS Base score: 6.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226251](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226251>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-27782](<https://vulners.com/cve/CVE-2022-27782>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by an easy connection reuse flaw for TLS and SSH. By sending a specially-crafted request using the connections in a connection pool, an attacker could exploit this vulnerability to bypass access restrictions. \nCVSS Base score: 9.8 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226252](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226252>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H) \n \n** CVEID: **[CVE-2022-27778](<https://vulners.com/cve/CVE-2022-27778>) \n** DESCRIPTION: **An unspecified error with removing wrong file when --no-clobber is used together with --remove-on-error option in cURL libcurl has an unknown impact and attack vector. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226248](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226248>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-27779](<https://vulners.com/cve/CVE-2022-27779>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by a flaw that wrongly allows HTTP cookies to be set for Top Level Domains (TLDs). By using a specially-crafted host name with a trailing dot, an attacker could exploit this vulnerability to allow arbitrary sites to set cookies that would get sent to a different and unrelated site or domain. \nCVSS Base score: 9.1 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226249](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226249>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N) \n \n** CVEID: **[CVE-2022-30115](<https://vulners.com/cve/CVE-2022-30115>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a HSTS check bypass flaw. By sending a specially-crafted request using a host name in the an URL with a trailing dot, an attacker could exploit this vulnerability to obtain sensitive information over clear-text HTTP, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226253](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226253>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-27780](<https://vulners.com/cve/CVE-2022-27780>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by a flaw that wrongly accepts percent-encoded URL separators like '/' by the URL parser. By sending a specially-crafted host name in a URL, an attacker could exploit this vulnerability to bypass filters and checks for URL. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226250](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226250>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by improper authentication validation when reuse OAUTH2-authenticated connections. By sending a specially-crafted request using user + \"other OAUTH2 bearer\", an attacker could exploit this vulnerability to bypass access authentication validation. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225291](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225291>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)\n\n## Affected Products and Versions\n\nAffected Product(s)| Version(s) \n---|--- \nPowerSC| 1.3 \nPowerSC| 2.0 \nPowerSC| 2.1 \n \nThe vulnerabilities in the following filesets are being addressed:\n\nFileset| Lower Level| Upper Level \n---|---|--- \npowerscStd.tnc_pm| 1.3.0.4| 2.1.0.2 \ncurl-7.83.1-1.aix7.1.ppc.rpm| 7.19.4| 7.83.0 \n \nNote: To find out whether the affected PowerSC filesets are installed on your systems, refer to the lslpp command found in AIX user's guide. To find out whether the affected curl filesets are installed on your systems, refer to the rpm command found in AIX user's guide.\n\nExample: lslpp -l | grep powerscStd\n\nExample: rpm -qa | grep curl\n\n \n\n\n## Remediation/Fixes\n\n**A. FIXES**\n\nIBM strongly recommends addressing the vulnerability now. \n\nFixes are available.\n\nThe fixes can be downloaded via ftp or http from:\n\nftp://aix.software.ibm.com/aix/efixes/powersc/security/curl_fix8.tar\n\n<http://aix.software.ibm.com/aix/efixes/powersc/security/curl_fix8.tar>\n\n<https://aix.software.ibm.com/aix/efixes/powersc/security/curl_fix8.tar>\n\nThe link above is to a tar file containing this signed advisory, open source fix packages, and OpenSSL signatures for each package.\n\nTo extract the fixes from the tar file:\n\ntar xvf curl_fix8.tar \n\ncd curl_fix8\n\nVerify you have retrieved the fixes intact:\n\nThe checksums below were generated using the \"openssl dgst -sha256 [filename]\" command as the following:\n\nopenssl dgst -sha256| filename \n---|--- \n422b362752cfed9b4b45593a527fe47a2e69a17fb60504a3b56dd3de8d6922b9| curl-7.83.1-1.aix7.1.ppc.rpm \n \nThese sums should match exactly. The OpenSSL signatures in the tar file and on this advisory can also be used to verify the integrity of the fixes. If the sums or signatures cannot be confirmed, contact IBM Support.\n\nopenssl dgst -sha256 -verify [pubkey_file] -signature [advisory_file].sig [advisory_file]\n\nopenssl dgst -sha256 -verify [pubkey_file] -signature [ifix_file].sig [ifix_file]\n\nPublished advisory OpenSSL signature file location:\n\n<http://aix.software.ibm.com/aix/efixes/powersc/security/curl_advisory8.asc.sig>\n\n<https://aix.software.ibm.com/aix/efixes/powersc/security/curl_advisory8.asc.sig>\n\nftp://aix.software.ibm.com/aix/efixes/powersc/security/curl_advisory8.asc.sig\n\n**B. FIX AND INTERIM FIX INSTALLATION**\n\nIMPORTANT: If possible, it is recommended that a mksysb backup of the system be created. Verify it is both bootable and readable before proceeding.\n\nTo extract the fixes from the tar file:\n\ntar xvf curl_fix8.tar\n\ncd curl_fix8\n\nTo install a fix package:\n\nrpm -ivh *.rpm\n\nrpm -Uvh *.rpm\n\nTo install any dependencies along with the fix package:\n\nyum update curl \n\n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-09-23T22:05:12", "type": "ibm", "title": "Security Bulletin: Multiple vulnerabilities in Curl affect PowerSC", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.6, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "NONE", "availabilityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "baseScore": 5.8, "vectorString": "AV:N/AC:M/Au:N/C:N/I:P/A:P", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-27778", "CVE-2022-27779", "CVE-2022-27780", "CVE-2022-27781", "CVE-2022-27782", "CVE-2022-30115"], "modified": "2022-09-23T22:05:12", "id": "01EB17D4B2EFCDFF9CCC4246DE32A531B02D3EFA07D6B09990C0B16360BD7F23", "href": "https://www.ibm.com/support/pages/node/6823211", "cvss": {"score": 5.8, "vector": "AV:N/AC:M/Au:N/C:N/I:P/A:P"}}, {"lastseen": "2023-02-28T01:40:34", "description": "## Summary\n\nMultiple vulnerabilities in libcurl affect the IBM Spectrum Protect Plus SQL, File Indexing, and Windows Host agents. These vulnerabilities include obtaining sensitive information, man-in-the-middle attacks, denial of service, and bypassing of security restrictions.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2021-22947](<https://vulners.com/cve/CVE-2021-22947>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a man-in-the-middle attack, caused by a flaw when connecting to an IMAP, POP3, SMTP or FTP server to exchange data securely using STARTTLS to upgrade the connection to TLS level. An attacker could exploit this vulnerability to launch a man-in-the-middle attack and gain access to the communication channel between endpoints to obtain sensitive information or further compromise the system. \nCVSS Base score: 7.4 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/209453](<https://exchange.xforce.ibmcloud.com/vulnerabilities/209453>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N) \n \n** CVEID: **[CVE-2021-22945](<https://vulners.com/cve/CVE-2021-22945>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a denial of service, caused by a use-after-free and double free flaw when sending data to an MQTT server. By sending a specially-crafted data, a remote attacker could exploit this vulnerability to cause a denial of service condition. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/209451](<https://exchange.xforce.ibmcloud.com/vulnerabilities/209451>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2021-22946](<https://vulners.com/cve/CVE-2021-22946>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a required TLS bypassed issue. By sniffing the network, an attacker could exploit this vulnerability to obtain sensitive data in clear text over the network, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/209452](<https://exchange.xforce.ibmcloud.com/vulnerabilities/209452>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by improper authentication validation when reuse OAUTH2-authenticated connections. By sending a specially-crafted request using user + \"other OAUTH2 bearer\", an attacker could exploit this vulnerability to bypass access authentication validation. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225291](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225291>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-32206](<https://vulners.com/cve/CVE-2022-32206>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a denial of service, caused by a flaw in the number of acceptable \"links\" in the \"chained\" HTTP compression algorithms. By persuading a victim to connect a specially-crafted server, a remote attacker could exploit this vulnerability to insert a virtually unlimited number of compression steps, and results in a denial of service condition. \nCVSS Base score: 4.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/229740](<https://exchange.xforce.ibmcloud.com/vulnerabilities/229740>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L) \n \n** CVEID: **[CVE-2022-32207](<https://vulners.com/cve/CVE-2022-32207>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by improper preservation of permissions when saving cookies, alt-svc and hsts data to local files. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain sensitive information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/229741](<https://exchange.xforce.ibmcloud.com/vulnerabilities/229741>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-32208](<https://vulners.com/cve/CVE-2022-32208>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a man-in-the-middle attack, caused by a flaw in the handling of message verification failures. An attacker could exploit this vulnerability to launch a man-in-the-middle attack and gain access to the communication channel between endpoints to inject data to the client.. \nCVSS Base score: 3.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/229742](<https://exchange.xforce.ibmcloud.com/vulnerabilities/229742>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:A/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:N) \n \n** CVEID: **[CVE-2022-32205](<https://vulners.com/cve/CVE-2022-32205>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a denial of service, caused by an issue with the ability to set excessive amounts of Set-Cookie: headers in a HTTP response to curl by a server. By persuading a victim to connect a specially-crafted server, a remote attacker could exploit this vulnerability to create requests that become larger than the threshold, and results in a denial of service condition. \nCVSS Base score: 4.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/229739](<https://exchange.xforce.ibmcloud.com/vulnerabilities/229739>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L) \n \n** CVEID: **[CVE-2022-27775](<https://vulners.com/cve/CVE-2022-27775>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a logic error in the config matching function. By sending a specially-crafted request using IPv6, an attacker could exploit this vulnerability to cause libcurl to reuse the wrong connection to obtain sensitive information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225295](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225295>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-27781](<https://vulners.com/cve/CVE-2022-27781>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a denial of service, caused by a flaw in the CURLOPT_CERTINFO option. By persuading a victim to visit a specially-crafted Web site, a remote attacker could exploit this vulnerability to cause a never ending busy-loop when trying to retrieve certificate chain information. \nCVSS Base score: 6.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226251](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226251>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-27782](<https://vulners.com/cve/CVE-2022-27782>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by an easy connection reuse flaw for TLS and SSH. By sending a specially-crafted request using the connections in a connection pool, an attacker could exploit this vulnerability to bypass access restrictions. \nCVSS Base score: 9.8 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226252](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226252>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H) \n \n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)\n\n## Affected Products and Versions\n\n**Affected Product(s)**| **Version(s)** \n---|--- \nIBM Spectrum Protect Plus| 10.1.0-10.1.11 \n \n\n\n## Remediation/Fixes\n\n**IBM Spectrum Protect** \n**Plus Affected Versions \n**| **Fixing \n**** Level**| **Deployment \nPlatform \n** | **Link to Fix and Instructions \n** \n---|---|---|--- \n10.1.0-10.1.11| 10.1.12| Windows| \n\n**[https://www.ibm.com/support/pages/node/6603663](<https://www.ibm.com/support/pages/node/6603663> \"https://www.ibm.com/support/pages/node/6603663\" )** \n \n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 9.8, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.9}, "published": "2022-09-19T22:54:30", "type": "ibm", "title": "Security Bulletin: Vulnerabilities in libcurl affect IBM Spectrum Protect Plus SQL, File Indexing, and Windows Host agents", "bulletinFamily": "software", "cvss2": {"severity": "HIGH", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "baseScore": 7.5, "vectorString": "AV:N/AC:L/Au:N/C:P/I:P/A:P", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 6.4, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2021-22945", "CVE-2021-22946", "CVE-2021-22947", "CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-27781", "CVE-2022-27782", "CVE-2022-32205", "CVE-2022-32206", "CVE-2022-32207", "CVE-2022-32208"], "modified": "2022-09-19T22:54:30", "id": "ED5CC772C4879175949A026879AB98730A2CB44FA2A70F04E865D49394F0358A", "href": "https://www.ibm.com/support/pages/node/6621463", "cvss": {"score": 7.5, "vector": "AV:N/AC:L/Au:N/C:P/I:P/A:P"}}, {"lastseen": "2023-02-28T01:45:20", "description": "## Summary\n\nThe product includes vulnerable components (e.g., third party libraries) that may be identified and exploited with automated tools. IBM QRadar WinCollect for IBM QRadar SIEM has addressed the applicable CVEs.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-1434](<https://vulners.com/cve/CVE-2022-1434>) \n** DESCRIPTION: **OpenSSL is vulnerable to a man-in-the-middle attack, caused by the use of the AAD data as the MAC key in the RC4-MD5 ciphersuite. A remote attacker could exploit this vulnerability to predict the MAC key and launch a man-in-the-middle attack and gain access to the communication channel between endpoints to modify data in transit in such a way that it will pass a MAC integrity check. \nCVSS Base score: 6.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225617](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225617>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N) \n \n** CVEID: **[CVE-2022-1343](<https://vulners.com/cve/CVE-2022-1343>) \n** DESCRIPTION: **OpenSSL could allow a remote attacker to bypass security restrictions, caused by a incorrect verification of response signing certificates by the OCSP_basic_verify function. By sending a specially-crafted request using the OCSP_NOCHECKS flag, an attacker could exploit this vulnerability to forge positive verification results. \nCVSS Base score: 5.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225618](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225618>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N) \n \n** CVEID: **[CVE-2022-1292](<https://vulners.com/cve/CVE-2022-1292>) \n** DESCRIPTION: **OpenSSL could allow a remote authenticated attacker to execute arbitrary commands on the system, caused by improper validation of user-supplied input by the c_rehash script. By sending a specially-crafted request using shell metacharacters, an attacker could exploit this vulnerability to execute arbitrary commands with the privileges of the script on the system. \nCVSS Base score: 6.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225619](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225619>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L) \n \n** CVEID: **[CVE-2022-1473](<https://vulners.com/cve/CVE-2022-1473>) \n** DESCRIPTION: **OpenSSL is vulnerable to a denial of service, caused by a resource leakage when decoding certificates and keys by the OPENSSL_LH_flush() function. By sending a specially-crafted request, a remote attacker could exploit this vulnerability to cause a denial of service. \nCVSS Base score: 5.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225616](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225616>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L) \n \n** CVEID: **[CVE-2021-22947](<https://vulners.com/cve/CVE-2021-22947>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a man-in-the-middle attack, caused by a flaw when connecting to an IMAP, POP3, SMTP or FTP server to exchange data securely using STARTTLS to upgrade the connection to TLS level. An attacker could exploit this vulnerability to launch a man-in-the-middle attack and gain access to the communication channel between endpoints to obtain sensitive information or further compromise the system. \nCVSS Base score: 7.4 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/209453](<https://exchange.xforce.ibmcloud.com/vulnerabilities/209453>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N) \n \n** CVEID: **[CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by improper authentication validation when reuse OAUTH2-authenticated connections. By sending a specially-crafted request using user + \"other OAUTH2 bearer\", an attacker could exploit this vulnerability to bypass access authentication validation. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225291](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225291>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2021-22945](<https://vulners.com/cve/CVE-2021-22945>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a denial of service, caused by a use-after-free and double free flaw when sending data to an MQTT server. By sending a specially-crafted data, a remote attacker could exploit this vulnerability to cause a denial of service condition. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/209451](<https://exchange.xforce.ibmcloud.com/vulnerabilities/209451>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-0778](<https://vulners.com/cve/CVE-2022-0778>) \n** DESCRIPTION: **OpenSSL is vulnerable to a denial of service, caused by a flaw in the BN_mod_sqrt() function when parsing certificates. By using a specially-crafted certificate with invalid explicit curve parameters, a remote attacker could exploit this vulnerability to cause an infinite loop, and results in a denial of service condition. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/221911](<https://exchange.xforce.ibmcloud.com/vulnerabilities/221911>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2021-22946](<https://vulners.com/cve/CVE-2021-22946>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a required TLS bypassed issue. By sniffing the network, an attacker could exploit this vulnerability to obtain sensitive data in clear text over the network, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/209452](<https://exchange.xforce.ibmcloud.com/vulnerabilities/209452>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-27775](<https://vulners.com/cve/CVE-2022-27775>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a logic error in the config matching function. By sending a specially-crafted request using IPv6, an attacker could exploit this vulnerability to cause libcurl to reuse the wrong connection to obtain sensitive information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225295](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225295>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2021-3712](<https://vulners.com/cve/CVE-2021-3712>) \n** DESCRIPTION: **OpenSSL could allow a remote attacker to obtain sensitive information, caused by an out-of-bounds read when processing ASN.1 strings. By sending specially crafted data, an attacker could exploit this vulnerability to read contents of memory on the system or perform a denial of service attack. \nCVSS Base score: 6.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/208073](<https://exchange.xforce.ibmcloud.com/vulnerabilities/208073>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L)\n\n## Affected Products and Versions\n\nAffected Product(s)| Version(s) \n---|--- \nQRadar WinCollect Agent| \n\n10.0 \n \nQRadar WinCollect Agent| \n\n10.0.1 \n \n## Remediation/Fixes\n\nIBM recommends customers upgrade their systems promptly.\n\nThere is a new upgrade for the WinCollect standalone agent. The following WinCollect standalone agent versions can be used to upgrade the affected versions to resolve the vulnerabilities. For information on how to upgrade your WinCollect version, see the WinCollect 10.0.2 release notes: <https://www.ibm.com/support/pages/node/6523772>\n\nDownload and install the WinCollect standalone agent version 10.0.2:\n\nWinCollect Agent MSI (64-bit) - Standalone only: [https://www.ibm.com/support/fixcentral/swg/doSelectFixes?options.selectedFixes=7.5.0-QRADAR-AGENT-wincollect-10.0.2-62.x64.msi&continue=1](<https://www.ibm.com/support/fixcentral/swg/doSelectFixes?options.selectedFixes=7.5.0-QRADAR-AGENT-wincollect-10.0.2-62.x64.msi&continue=1> \"https://www.ibm.com/support/fixcentral/swg/doSelectFixes?options.selectedFixes=7.5.0-QRADAR-AGENT-wincollect-10.0.2-62.x64.msi&continue=1\" )\n\nWinCollect Agent MSI (32-bit) - Standalone only: [https://www.ibm.com/support/fixcentral/swg/doSelectFixes?options.selectedFixes=7.5.0-QRADAR-AGENT-wincollect-10.0.2-62.x86.msi&continue=1](<https://www.ibm.com/support/fixcentral/swg/doSelectFixes?options.selectedFixes=7.5.0-QRADAR-AGENT-wincollect-10.0.2-62.x86.msi&continue=1> \"https://www.ibm.com/support/fixcentral/swg/doSelectFixes?options.selectedFixes=7.5.0-QRADAR-AGENT-wincollect-10.0.2-62.x86.msi&continue=1\" )\n\n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 9.8, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.9}, "published": "2022-06-17T18:45:16", "type": "ibm", "title": "Security Bulletin: IBM QRadar WinCollect is vulnerable to using components with known vulnerabilities", "bulletinFamily": "software", "cvss2": {"severity": "HIGH", "exploitabilityScore": 10.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "COMPLETE", "availabilityImpact": "COMPLETE", "integrityImpact": "COMPLETE", "baseScore": 10.0, "vectorString": "AV:N/AC:L/Au:N/C:C/I:C/A:C", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 10.0, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2021-22945", "CVE-2021-22946", "CVE-2021-22947", "CVE-2021-3712", "CVE-2022-0778", "CVE-2022-1292", "CVE-2022-1343", "CVE-2022-1434", "CVE-2022-1473", "CVE-2022-22576", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776"], "modified": "2022-06-17T18:45:16", "id": "5F4A0C2884928132058FB1F6A2A491E93E6AD59F7652C09398215C3B1702DA1D", "href": "https://www.ibm.com/support/pages/node/6596085", "cvss": {"score": 10.0, "vector": "AV:N/AC:L/Au:N/C:C/I:C/A:C"}}, {"lastseen": "2023-02-27T21:33:05", "description": "## Summary\n\nThe product includes multiple vulnerable components (e.g., framework libraries) that may be identified and exploited with automated tools. IBM QRadar SIEM has addressed the applicable CVEs.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-1629](<https://vulners.com/cve/CVE-2022-1629>) \n** DESCRIPTION: **Vim is vulnerable to a buffer overflow, caused by buffer over-read in find_next_quote. By opening a specially-crafted file, a local authenticated attacker could overflow a buffer and execute arbitrary code on the system or cause a denial of service. \nCVSS Base score: 6.6 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226323](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226323>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H) \n \n** CVEID: **[CVE-2022-1621](<https://vulners.com/cve/CVE-2022-1621>) \n** DESCRIPTION: **Vim is vulnerable to a heap-based buffer overflow, caused by improper bounds checking by vim_strncpy find_word. By persuading a victim to open a specially-crafted file, a remote attacker could overflow a buffer and execute arbitrary code on the system or cause a denial of service. \nCVSS Base score: 7.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226099](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226099>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:H/A:H) \n \n** CVEID: **[CVE-2022-1897](<https://vulners.com/cve/CVE-2022-1897>) \n** DESCRIPTION: **Vim could allow a remote attacker to execute arbitrary code on the system, caused by an out-of-bounds write in function vim_regsub_both. By persuading a victim to run a specially-crafted file, an attacker could exploit this vulnerability to execute arbitrary code on the system. \nCVSS Base score: 7.8 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/227525](<https://exchange.xforce.ibmcloud.com/vulnerabilities/227525>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H) \n \n** CVEID: **[CVE-2022-1785](<https://vulners.com/cve/CVE-2022-1785>) \n** DESCRIPTION: **Vim could allow a local authenticated attacker to execute arbitrary code on the system, caused by an out-of-bounds write in function vim_regsub_both at regexp.c. By opening a specially-crafted file, an attacker could exploit this vulnerability to execute arbitrary code on the system. \nCVSS Base score: 7.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/227016](<https://exchange.xforce.ibmcloud.com/vulnerabilities/227016>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:H) \n \n** CVEID: **[CVE-2022-1927](<https://vulners.com/cve/CVE-2022-1927>) \n** DESCRIPTION: **Vim could allow a remote attacker to execute arbitrary code on the system, caused by a buffer over-read in function utf_ptr2char. By persuading a victim to open a specially-crafted file, an attacker could exploit this vulnerability to execute arbitrary code on the system. \nCVSS Base score: 7.8 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/227562](<https://exchange.xforce.ibmcloud.com/vulnerabilities/227562>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H) \n \n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by improper authentication validation when reuse OAUTH2-authenticated connections. By sending a specially-crafted request using user + \"other OAUTH2 bearer\", an attacker could exploit this vulnerability to bypass access authentication validation. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225291](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225291>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-27775](<https://vulners.com/cve/CVE-2022-27775>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a logic error in the config matching function. By sending a specially-crafted request using IPv6, an attacker could exploit this vulnerability to cause libcurl to reuse the wrong connection to obtain sensitive information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225295](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225295>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-29824](<https://vulners.com/cve/CVE-2022-29824>) \n** DESCRIPTION: **GNOME libxml2 is vulnerable to a denial of service, caused by an integer overflows in several buffer handling functions in buf.c (xmlBuf*) and tree.c (xmlBuffer*). By persuading a victim to open a specially-crafted XML file, a remote attacker could exploit this vulnerability to cause a denial of service condition. \nCVSS Base score: 5.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225645](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225645>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-1586](<https://vulners.com/cve/CVE-2022-1586>) \n** DESCRIPTION: **PCRE2 could allow a remote attacker to execute arbitrary code on the system, caused by an out-of-bounds read in the compile_xclass_matchingpath() function in the pcre2_jit_compile.c file. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary code on the system. \nCVSS Base score: 7.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226863](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226863>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L) \n \n** CVEID: **[CVE-2022-25314](<https://vulners.com/cve/CVE-2022-25314>) \n** DESCRIPTION: **libexpat could allow a remote attacker to execute arbitrary code on the system, caused by an integer overflow in the copyString function. By sending an overly-long argument, an attacker could overflow a buffer and execute arbitrary code on the system. \nCVSS Base score: 7.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/219946](<https://exchange.xforce.ibmcloud.com/vulnerabilities/219946>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L) \n \n** CVEID: **[CVE-2021-40528](<https://vulners.com/cve/CVE-2021-40528>) \n** DESCRIPTION: **GnuPG Libgcrypt could allow a remote attacker to bypass security restrictions, caused by a flaw in the ElGamal implementation. By sending a specially-crafted request, an attacker could exploit this vulnerability to perform a cross-configuration attack against OpenPGP. \nCVSS Base score: 5.9 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/208744](<https://exchange.xforce.ibmcloud.com/vulnerabilities/208744>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N)\n\n## Affected Products and Versions\n\nAffected Product(s)| Version(s) \n---|--- \nIBM QRadar SIEM| 7.4.0 - 7.4.3 Fix Pack 7 \nIBM QRadar SIEM| 7.5.0 - 7.5.0 Update Pack 3 \n \n \n\n\n## Remediation/Fixes\n\nIBM encourages customers to update their systems promptly. \n\nAffected Product(s)| Versions| Fix \n---|---|--- \nIBM QRadar SIEM| 7.4| [7.4.3 Fix Pack 8](<https://www.ibm.com/support/fixcentral/swg/downloadFixes?parent=IBM%20Security&product=ibm/Other+software/IBM+Security+QRadar+Incident+Forensics&release=7.4.0&platform=Linux&function=fixId&fixids=7.4.3-QRADAR-QIFSFS-20230202163329&includeRequisites=1&includeSupersedes=0&downloadMethod=http> \"7.4.3 Fix Pack 8\" ) \nIBM QRadar SIEM| 7.5| [7.5.0 Update Pack 4](<https://www.ibm.com/support/fixcentral/swg/downloadFixes?parent=IBM%20Security&product=ibm/Other+software/IBM+Security+QRadar+SIEM&release=7.5.0&platform=Linux&function=fixId&fixids=7.5.0-QRADAR-QRSIEM-20221129155237&includeRequisites=1&includeSupersedes=0&downloadMethod=http> \"7.5.0 Update Pack 4\" ) \n \n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 3.9, "cvssV3": {"baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "NONE", "privilegesRequired": "NONE", "baseScore": 9.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2023-02-27T17:34:12", "type": "ibm", "title": "Security Bulletin: IBM QRadar SIEM Application Framework Base Image is vulnerable to using components with Known Vulnerabilities", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.6, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "PARTIAL", "availabilityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "baseScore": 6.8, "vectorString": "AV:N/AC:M/Au:N/C:P/I:P/A:P", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 6.4, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2021-40528", "CVE-2022-1586", "CVE-2022-1621", "CVE-2022-1629", "CVE-2022-1785", "CVE-2022-1897", "CVE-2022-1927", "CVE-2022-22576", "CVE-2022-25314", "CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-29824"], "modified": "2023-02-27T17:34:12", "id": "AE567113545218823FAE52D3A477168F041C0F35D4EE0A605E4BEBE15225DAAD", "href": "https://www.ibm.com/support/pages/node/6958506", "cvss": {"score": 6.8, "vector": "AV:N/AC:M/Au:N/C:P/I:P/A:P"}}, {"lastseen": "2023-02-28T01:38:39", "description": "## Summary\n\nVulnerabilities contained within libcurl (a 3rd party component) were identified and remediated in the IBM MaaS360 Cloud Extender Agent and Base Module.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-27780](<https://vulners.com/cve/CVE-2022-27780>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by a flaw that wrongly accepts percent-encoded URL separators like '/' by the URL parser. By sending a specially-crafted host name in a URL, an attacker could exploit this vulnerability to bypass filters and checks for URL. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226250](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226250>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-27781](<https://vulners.com/cve/CVE-2022-27781>) \n** DESCRIPTION: **cURL libcurl is vulnerable to a denial of service, caused by a flaw in the the CURLOPT_CERTINFO option. By persuading a victim to visit a specially-crafted Web site, a remote attacker could exploit this vulnerability to cause a never ending busy-loop when trying to retrieve certificate chain information. \nCVSS Base score: 6.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226251](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226251>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-27778](<https://vulners.com/cve/CVE-2022-27778>) \n** DESCRIPTION: **An unspecified error with removing wrong file when --no-clobber is used together with --remove-on-error option in cURL libcurl has an unknown impact and attack vector. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226248](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226248>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-27782](<https://vulners.com/cve/CVE-2022-27782>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by an easy connection reuse flaw for TLS and SSH. By sending a specially-crafted request using the connections in a connection pool, an attacker could exploit this vulnerability to bypass access restrictions. \nCVSS Base score: 9.8 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226252](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226252>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H) \n \n** CVEID: **[CVE-2022-30115](<https://vulners.com/cve/CVE-2022-30115>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a HSTS check bypass flaw. By sending a specially-crafted request using a host name in the an URL with a trailing dot, an attacker could exploit this vulnerability to obtain sensitive information over clear-text HTTP, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226253](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226253>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-27779](<https://vulners.com/cve/CVE-2022-27779>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by a flaw that wrongly allows HTTP cookies to be set for Top Level Domains (TLDs). By using a specially-crafted host name with a trailing dot, an attacker could exploit this vulnerability to allow arbitrary sites to set cookies that would get sent to a different and unrelated site or domain. \nCVSS Base score: 9.1 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226249](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226249>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N) \n \n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-27775](<https://vulners.com/cve/CVE-2022-27775>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a logic error in the config matching function. By sending a specially-crafted request using IPv6, an attacker could exploit this vulnerability to cause libcurl to reuse the wrong connection to obtain sensitive information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225295](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225295>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)\n\n## Affected Products and Versions\n\nAffected Product(s)| Version(s) \n---|--- \nIBM MaaS360 Cloud Extender Agent| 2.106.500.011 and prior \nIBM MaaS360 Cloud Extender Base| 2.106.500 and prior \n \n\n\n## Remediation/Fixes\n\nIBM strongly recommends customers to update their systems promptly. \n\n * Update the IBM MaaS360 Cloud Extender to version 2.106.600.007 or greater.\n * Apply the IBM Base Module to version 2.106.600 or greater\n\nThe latest Cloud Extender Agent is available within the MaaS360 Administrator Portal.\n\nInstructions to upgrade the Agent and modules are located on this IBM Documentation [page](<https://www.ibm.com/docs/en/maas360?topic=extender-upgrading-cloud> \"page\" ).\n\n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "NONE", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H", "version": "3.1", "userInteraction": "REQUIRED"}, "impactScore": 5.2}, "published": "2022-10-06T04:10:57", "type": "ibm", "title": "Security Bulletin: IBM MaaS360 Cloud Extender Agent and Base Module use libcurl with multiple known vulnerabilities", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.6, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "NONE", "availabilityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "baseScore": 5.8, "vectorString": "AV:N/AC:M/Au:N/C:N/I:P/A:P", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27774", "CVE-2022-27775", "CVE-2022-27776", "CVE-2022-27778", "CVE-2022-27779", "CVE-2022-27780", "CVE-2022-27781", "CVE-2022-27782", "CVE-2022-30115"], "modified": "2022-10-06T04:10:57", "id": "7DB6F911B9E7035DD6E1EB898B3C46FAEC2CE6E894587513346BE35A52B39814", "href": "https://www.ibm.com/support/pages/node/6826101", "cvss": {"score": 5.8, "vector": "AV:N/AC:M/Au:N/C:N/I:P/A:P"}}, {"lastseen": "2023-02-28T21:38:51", "description": "## Summary\n\ncURL is used by IBM App Connect Enterprise Certified Container for internal communication and status checking. IBM App Connect Enterprise Certified Container operands may be vulnerable to bypassing access restrictions. This bulletin provides patch information to address the reported vulnerability CVE-2022-22576 in cURL\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by improper authentication validation when reuse OAUTH2-authenticated connections. By sending a specially-crafted request using user + \"other OAUTH2 bearer\", an attacker could exploit this vulnerability to bypass access authentication validation. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225291](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225291>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)\n\n## Affected Products and Versions\n\nAffected Product(s)| Version(s) \n---|--- \nApp Connect Enterprise Certified Container| 4.1 \nApp Connect Enterprise Certified Container| 4.2 \nApp Connect Enterprise Certified Container| 5.0-lts \n \n\n\n## Remediation/Fixes\n\n**App Connect Enterprise Certified Container 4.1, 4.2 and 5.0 (Continuous Delivery)**\n\nUpgrade to App Connect Enterprise Certified Container Operator version 5.1.0 or higher, and ensure that all components are at 12.0.5.0-r2 or higher. Documentation on the upgrade process is available at <https://www.ibm.com/docs/en/app-connect/containers_cd?topic=releases-upgrading-operator>\n\n**App Connect Enterprise Certified Container 5.0 LTS (Long Term Support)**\n\nUpgrade to App Connect Enterprise Certified Container Operator version 5.0.1 or higher, and ensure that all components are at 12.0.6.0-r1-lts or higher. Documentation on the upgrade process is available at <https://www.ibm.com/docs/en/app-connect-contlts?topic=releases-upgrading-operator>\n\n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-11-04T18:02:51", "type": "ibm", "title": "Security Bulletin: IBM App Connect Enterprise Certified Container operands may be vulnerable to bypassing access restrictions due to CVE-2022-22576", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576"], "modified": "2022-11-04T18:02:51", "id": "D7C8D92112017543EAEF848B3D7AFE5870C69E9C02A09A0FAB81B0C2E2248EA1", "href": "https://www.ibm.com/support/pages/node/6837309", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-02-28T21:35:48", "description": "## Summary\n\nIBM Watson Speech Services Cartridge for IBM Cloud Pak for Data is vulnerable to a security restrictions bypass caused by improper authentication validation in cURL libcurl (CVE-2022-22576). cURL libcurl is used as part of the base image included in our service components. Please read the details for remediation below.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by improper authentication validation when reuse OAUTH2-authenticated connections. By sending a specially-crafted request using user + \"other OAUTH2 bearer\", an attacker could exploit this vulnerability to bypass access authentication validation. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225291](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225291>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)\n\n## Affected Products and Versions\n\nAffected Product(s)| Version(s) \n---|--- \nIBM Watson Speech Services Cartridge for IBM Cloud Pak for Data| 4.0.0 - 4.5.4 \n \n \n \n\n\n \n\n\n## Remediation/Fixes\n\nIBM strongly recommends addressing the vulnerability now by upgrading. \n\n**Product(s)**| **Version(s) \n**| **Remediation/Fix/Instructions** \n---|---|--- \nIBM Watson Speech Services Cartridge for IBM Cloud Pak for Data| [**4.6**](<https://www.ibm.com/docs/en/cloud-paks/cp-data>)| **[The fix in 4.6 applies to all versions listed (4.0.0-4.5.4). Version 4.6 can be downloaded and installed from: ](<https://www.ibm.com/docs/en/cloud-paks/cp-data>) \n<https://www.ibm.com/docs/en/cloud-paks/cp-data> \n** \n \n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2023-01-12T21:59:00", "type": "ibm", "title": "Security Bulletin: IBM Watson Speech Services Cartridge for IBM Cloud Pak for Data is vulnerable to a security restrictions bypass in cURL libcurl (CVE-2022-22576).", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.0, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "LOW", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "PARTIAL", "baseScore": 5.5, "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 4.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-22576"], "modified": "2023-01-12T21:59:00", "id": "5B64E08A61601D7E0C6BD624C76B8ED1E6F206BBCEE2177F4934F3CC32D64E2F", "href": "https://www.ibm.com/support/pages/node/6843877", "cvss": {"score": 5.5, "vector": "AV:N/AC:L/Au:S/C:P/I:P/A:N"}}, {"lastseen": "2023-02-28T01:42:32", "description": "## Summary\n\nSecurity Bulletin: Multiple vulnerabilities may affect IBM Robotic Process Automation for Cloud Pak\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-27782](<https://vulners.com/cve/CVE-2022-27782>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by an easy connection reuse flaw for TLS and SSH. By sending a specially-crafted request using the connections in a connection pool, an attacker could exploit this vulnerability to bypass access restrictions. \nCVSS Base score: 9.8 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226252](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226252>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H) \n \n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by improper authentication validation when reuse OAUTH2-authenticated connections. By sending a specially-crafted request using user + \"other OAUTH2 bearer\", an attacker could exploit this vulnerability to bypass access authentication validation. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225291](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225291>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-23267](<https://vulners.com/cve/CVE-2022-23267>) \n** DESCRIPTION: **Microsoft .NET is vulnerable to a denial of service. By sending a specially-crafted request, a remote attacker could exploit this vulnerability to cause a denial of service condition. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225380](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225380>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-29117](<https://vulners.com/cve/CVE-2022-29117>) \n** DESCRIPTION: **Microsoft ASP.NET and Visual Studio are vulnerable to a denial of service. By sending a specially-crafted request, a remote attacker could exploit this vulnerability to cause a denial of service condition. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225448](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225448>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-29145](<https://vulners.com/cve/CVE-2022-29145>) \n** DESCRIPTION: **Microsoft ASP.NET and Visual Studio are vulnerable to a denial of service. By sending a specially-crafted request, a remote attacker could exploit this vulnerability to cause a denial of service condition. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225467](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225467>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2021-3737](<https://vulners.com/cve/CVE-2021-3737>) \n** DESCRIPTION: **Python is vulnerable to a denial of service, caused by improper handling of HTTP response in the HTTP client code. By persuading a victim to visit a specially-crafted web site, a remote attacker could exploit this vulnerability to cause the client script enter an infinite loop, and results in a denial of service condition. \nCVSS Base score: 6.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/213407](<https://exchange.xforce.ibmcloud.com/vulnerabilities/213407>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2021-4189](<https://vulners.com/cve/CVE-2021-4189>) \n** DESCRIPTION: **Python could allow a remote attacker to obtain sensitive information, caused by a flaw when using the FTP client library in PASV (passive) mode. By using a specially-crafted FTP server, an attacker could exploit this vulnerability to obtain service banner information from private network., and use this information to launch further attacks against the affected system. \nCVSS Base score: 5.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/227269](<https://exchange.xforce.ibmcloud.com/vulnerabilities/227269>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N) \n \n** CVEID: **[CVE-2021-3634](<https://vulners.com/cve/CVE-2021-3634>) \n** DESCRIPTION: **libssh is vulnerable to a heap-based buffer overflow, caused by improper bounds checking. By sending a specially-crafted request, a remote authenticated attacker could overflow a buffer and execute arbitrary code on the system or cause the application to crash. \nCVSS Base score: 5.4 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/208281](<https://exchange.xforce.ibmcloud.com/vulnerabilities/208281>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:L)\n\n## Affected Products and Versions\n\n**Affected Product(s)**| **Version(s) \n** \n---|--- \nIBM Robotic Process Automation for Cloud Pak| 21.0.1, 21.0.2 \n \n \n\n\n## Remediation/Fixes\n\n**IBM strongly recommends addressing the vulnerability now.**\n\n**Product(s)**| **Version(s) number and/or range **| **Remediation/Fix/Instructions** \n---|---|--- \nIBM Robotic Process Automation for Cloud Pak| < 21.0.3| Follow [instructions](<https://www.ibm.com/docs/en/rpa/21.0?topic=platform-preparing-applying-upgraded-custom-resource> \"instructions\" ) to upgrade to version 21.0.3 or higher. \n \n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "baseScore": 8.1, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N", "version": "3.1", "userInteraction": "NONE"}, "impactScore": 5.2}, "published": "2022-08-25T01:57:07", "type": "ibm", "title": "Security Bulletin: Multiple vulnerabilities may affect IBM Robotic Process Automation for Cloud Pak", "bulletinFamily": "software", "cvss2": {"severity": "HIGH", "exploitabilityScore": 8.6, "obtainAllPrivilege": false, "userInteractionRequired": false, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "NONE", "availabilityImpact": "COMPLETE", "integrityImpact": "NONE", "baseScore": 7.1, "vectorString": "AV:N/AC:M/Au:N/C:N/I:N/A:C", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 6.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2021-3634", "CVE-2021-3737", "CVE-2021-4189", "CVE-2022-22576", "CVE-2022-23267", "CVE-2022-27774", "CVE-2022-27776", "CVE-2022-27782", "CVE-2022-29117", "CVE-2022-29145"], "modified": "2022-08-25T01:57:07", "id": "FBEF03A095B8D1E19B9E4037A274023851826F494D85383B4064E73E0E5C4B81", "href": "https://www.ibm.com/support/pages/node/6615217", "cvss": {"score": 7.1, "vector": "AV:N/AC:M/Au:N/C:N/I:N/A:C"}}, {"lastseen": "2023-02-28T21:38:52", "description": "## Summary\n\ncURL is used by IBM App Connect Enterprise Certified Container for internal communication and status checking. IBM App Connect Enterprise Certified Container operands may be vulnerable to loss of confidentiality. This bulletin provides patch information to address the reported vulnerability CVE-2022-27774 in cURL.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)\n\n## Affected Products and Versions\n\nAffected Product(s)| Version(s) \n---|--- \nApp Connect Enterprise Certified Container| 4.1 \nApp Connect Enterprise Certified Container| 4.2 \nApp Connect Enterprise Certified Container| 5.0-lts \n \n\n\n## Remediation/Fixes\n\n**App Connect Enterprise Certified Container 4.1, 4.2 and 5.0 (Continuous Delivery)**\n\nUpgrade to App Connect Enterprise Certified Container Operator version 5.1.0 or higher, and ensure that all components are at 12.0.5.0-r2 or higher. Documentation on the upgrade process is available at <https://www.ibm.com/docs/en/app-connect/containers_cd?topic=releases-upgrading-operator>\n\n**App Connect Enterprise Certified Container 5.0 LTS (Long Term Support)**\n\nUpgrade to App Connect Enterprise Certified Container Operator version 5.0.1 or higher, and ensure that all components are at 12.0.6.0-r1-lts or higher. Documentation on the upgrade process is available at <https://www.ibm.com/docs/en/app-connect-contlts?topic=releases-upgrading-operator>\n\n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 2.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.7, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:N/A:N", "version": "3.1", "userInteraction": "REQUIRED"}, "impactScore": 3.6}, "published": "2022-11-04T18:04:36", "type": "ibm", "title": "Security Bulletin: IBM App Connect Enterprise Certified Container operands may be vulnerable to loss of confidentiality due to CVE-2022-27774", "bulletinFamily": "software", "cvss2": {"severity": "LOW", "exploitabilityScore": 6.8, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 3.5, "vectorString": "AV:N/AC:M/Au:S/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27774"], "modified": "2022-11-04T18:04:36", "id": "DECF188BD7B22EE29BDDF9131C8C59E6F8CB4BE445CB47A735DCDD9FA2C208B1", "href": "https://www.ibm.com/support/pages/node/6837313", "cvss": {"score": 3.5, "vector": "AV:N/AC:M/Au:S/C:P/I:N/A:N"}}, {"lastseen": "2023-02-28T21:35:59", "description": "## Summary\n\nIBM Watson Speech Services Cartridge for IBM Cloud Pak for Data is vulnerable to credential exposure in cURL libcurl (CVE-2022-27774), which could allow an attacker to use this information to launch further attacks against the affected system. The affected component, \"same host check\" in cURL libcurl, is used as part of the base image included in our service images. Please read the details for remediation below.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)\n\n## Affected Products and Versions\n\nAffected Product(s)| Version(s) \n---|--- \nIBM Watson Speech Services Cartridge for IBM Cloud Pak for Data| 4.0.0 - 4.5.4 \n \n \n\n\n## Remediation/Fixes\n\nIBM strongly recommends addressing the vulnerability now by upgrading. \n\n**Product(s)**| **Version(s) \n**| **Remediation/Fix/Instructions** \n---|---|--- \nIBM Watson Speech Services Cartridge for IBM Cloud Pak for Data| [**4.6**](<https://www.ibm.com/docs/en/cloud-paks/cp-data>)| **[The fix in 4.6 applies to all versions listed (4.0.0-4.5.4). Version 4.6 can be downloaded and installed from: ](<https://www.ibm.com/docs/en/cloud-paks/cp-data>) \n<https://www.ibm.com/docs/en/cloud-paks/cp-data> \n** \n \n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 2.1, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "baseScore": 5.7, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:N/A:N", "version": "3.1", "userInteraction": "REQUIRED"}, "impactScore": 3.6}, "published": "2023-01-12T21:59:00", "type": "ibm", "title": "Security Bulletin: IBM Watson Speech Services Cartridge for IBM Cloud Pak for Data is vulnerable to credential exposure in cURL libcurl (CVE-2022-27774)", "bulletinFamily": "software", "cvss2": {"severity": "LOW", "exploitabilityScore": 6.8, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 3.5, "vectorString": "AV:N/AC:M/Au:S/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "SINGLE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27774"], "modified": "2023-01-12T21:59:00", "id": "92A70E2A7474E80E81356899277B884DD4AD0CEEA467AD9D0373553416C79B82", "href": "https://www.ibm.com/support/pages/node/6843879", "cvss": {"score": 3.5, "vector": "AV:N/AC:M/Au:S/C:P/I:N/A:N"}}, {"lastseen": "2023-02-28T21:35:57", "description": "## Summary\n\nIBM Watson Speech Services Cartridge for IBM Cloud Pak for Data is vulnerable to data information exposure in cURL libcurl ( CVE-2022-27776), which could allow an attacker to obtain authentication or cookie header information. cURL libcurl is used as part of the base image included in our service images. Please read the details for remediation below.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)\n\n## Affected Products and Versions\n\nAffected Product(s)| Version(s) \n---|--- \nIBM Watson Speech Services Cartridge for IBM Cloud Pak for Data| 4.0.0 - 4.5.4 \n \n \n \n\n\n \n\n\n## Remediation/Fixes\n\nIBM strongly recommends addressing the vulnerability now by upgrading. \n\n**Product(s)**| **Version(s) \n**| **Remediation/Fix/Instructions** \n---|---|--- \nIBM Watson Speech Services Cartridge for IBM Cloud Pak for Data| [**4.6**](<https://www.ibm.com/docs/en/cloud-paks/cp-data>)| **[The fix in 4.6 applies to all versions listed (4.0.0-4.5.4). Version 4.6 can be downloaded and installed from: ](<https://www.ibm.com/docs/en/cloud-paks/cp-data>) \n<https://www.ibm.com/docs/en/cloud-paks/cp-data> \n** \n \n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "NONE", "baseScore": 6.5, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N", "version": "3.1", "userInteraction": "REQUIRED"}, "impactScore": 3.6}, "published": "2023-01-12T21:59:00", "type": "ibm", "title": "Security Bulletin: IBM Watson Speech Services Cartridge for IBM Cloud Pak for Data is vulnerable to data information exposure in cURL libcurl (CVE-2022-27776)", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.6, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.3, "vectorString": "AV:N/AC:M/Au:N/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27776"], "modified": "2023-01-12T21:59:00", "id": "0B92E693C8369CD4C3203853F3031242D5F13888E439CDC8635CC763E0A80FBA", "href": "https://www.ibm.com/support/pages/node/6843881", "cvss": {"score": 4.3, "vector": "AV:N/AC:M/Au:N/C:P/I:N/A:N"}}, {"lastseen": "2023-02-28T21:38:51", "description": "## Summary\n\ncURL is used by IBM App Connect Enterprise Certified Container for internal communication and status checking. IBM App Connect Enterprise Certified Container operands may be vulnerable to loss of confidentiality. This bulletin provides patch information to address the reported vulnerability CVE-2022-27776 in cURL.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)\n\n## Affected Products and Versions\n\nAffected Product(s)| Version(s) \n---|--- \nApp Connect Enterprise Certified Container| 4.1 \nApp Connect Enterprise Certified Container| 4.2 \nApp Connect Enterprise Certified Container| 5.0-lts \n \n\n\n## Remediation/Fixes\n\n**App Connect Enterprise Certified Container 4.1, 4.2 and 5.0 (Continuous Delivery)**\n\nUpgrade to App Connect Enterprise Certified Container Operator version 5.1.0 or higher, and ensure that all components are at 12.0.5.0-r2 or higher. Documentation on the upgrade process is available at <https://www.ibm.com/docs/en/app-connect/containers_cd?topic=releases-upgrading-operator>\n\n**App Connect Enterprise Certified Container 5.0 LTS (Long Term Support)**\n\nUpgrade to App Connect Enterprise Certified Container Operator version 5.0.1 or higher, and ensure that all components are at 12.0.6.0-r1-lts or higher. Documentation on the upgrade process is available at <https://www.ibm.com/docs/en/app-connect-contlts?topic=releases-upgrading-operator>\n\n## Workarounds and Mitigations\n\nNone\n\n## ", "cvss3": {"exploitabilityScore": 2.8, "cvssV3": {"baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "attackComplexity": "LOW", "scope": "UNCHANGED", "attackVector": "NETWORK", "availabilityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "NONE", "baseScore": 6.5, "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N", "version": "3.1", "userInteraction": "REQUIRED"}, "impactScore": 3.6}, "published": "2022-11-04T18:06:17", "type": "ibm", "title": "Security Bulletin: IBM App Connect Enterprise Certified Container operands may be vulnerable to loss of confidentiality due to CVE-2022-27776", "bulletinFamily": "software", "cvss2": {"severity": "MEDIUM", "exploitabilityScore": 8.6, "obtainAllPrivilege": false, "userInteractionRequired": true, "obtainOtherPrivilege": false, "cvssV2": {"accessComplexity": "MEDIUM", "confidentialityImpact": "PARTIAL", "availabilityImpact": "NONE", "integrityImpact": "NONE", "baseScore": 4.3, "vectorString": "AV:N/AC:M/Au:N/C:P/I:N/A:N", "version": "2.0", "accessVector": "NETWORK", "authentication": "NONE"}, "impactScore": 2.9, "acInsufInfo": false, "obtainUserPrivilege": false}, "cvelist": ["CVE-2022-27776"], "modified": "2022-11-04T18:06:17", "id": "B5DA72DF7EEAE34F809DA634F4DDDBF5AD53D17D3238125BF5910EC8B91D9D9F", "href": "https://www.ibm.com/support/pages/node/6837315", "cvss": {"score": 4.3, "vector": "AV:N/AC:M/Au:N/C:P/I:N/A:N"}}, {"lastseen": "2023-02-28T01:43:22", "description": "## Summary\n\nMultiple issues were identified in Red Hat UBI(ubi8/ubi-minimal) v8.6-x packages [Golang Go, libxml2, curl, expat ,libgcrypt and IBM WebSphere Application Server Liberty] that were shipped with IBM MQ Operator and IBM supplied MQ Advanced container images.\n\n## Vulnerability Details\n\n** CVEID: **[CVE-2022-24921](<https://vulners.com/cve/CVE-2022-24921>) \n** DESCRIPTION: **Golang Go is vulnerable to a denial of service, caused by improper input validation. By using a specially-crafted deeply nested expression, a remote attacker could exploit this vulnerability to cause a goroutine stack exhaustion, and results in a denial of service condition. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/221503](<https://exchange.xforce.ibmcloud.com/vulnerabilities/221503>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-27782](<https://vulners.com/cve/CVE-2022-27782>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by an easy connection reuse flaw for TLS and SSH. By sending a specially-crafted request using the connections in a connection pool, an attacker could exploit this vulnerability to bypass access restrictions. \nCVSS Base score: 9.8 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/226252](<https://exchange.xforce.ibmcloud.com/vulnerabilities/226252>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H) \n \n** CVEID: **[CVE-2022-27776](<https://vulners.com/cve/CVE-2022-27776>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw when asked to send custom headers or cookies in its HTTP requests. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain authentication or cookie header data information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225296](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225296>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-29824](<https://vulners.com/cve/CVE-2022-29824>) \n** DESCRIPTION: **GNOME libxml2 is vulnerable to a denial of service, caused by an integer overflows in several buffer handling functions in buf.c (xmlBuf*) and tree.c (xmlBuffer*). By persuading a victim to open a specially-crafted XML file, a remote attacker could exploit this vulnerability to cause a denial of service condition. \nCVSS Base score: 5.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225645](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225645>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-27774](<https://vulners.com/cve/CVE-2022-27774>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to obtain sensitive information, caused by a flaw in the \"same host check\" feature during a cross protocol redirects. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain credentials information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225294](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225294>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N) \n \n** CVEID: **[CVE-2022-22576](<https://vulners.com/cve/CVE-2022-22576>) \n** DESCRIPTION: **cURL libcurl could allow a remote attacker to bypass security restrictions, caused by improper authentication validation when reuse OAUTH2-authenticated connections. By sending a specially-crafted request using user + \"other OAUTH2 bearer\", an attacker could exploit this vulnerability to bypass access authentication validation. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225291](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225291>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N) \n \n** CVEID: **[CVE-2022-25313](<https://vulners.com/cve/CVE-2022-25313>) \n** DESCRIPTION: **libexpat is vulnerable to a denial of service, caused by stack exhaustion in build_model. By persuading a victim to open a specially-crafted file, a remote attacker could exploit this vulnerability using a large nesting depth in the DTD element to cause a denial of service. \nCVSS Base score: 5.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/219947](<https://exchange.xforce.ibmcloud.com/vulnerabilities/219947>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-25314](<https://vulners.com/cve/CVE-2022-25314>) \n** DESCRIPTION: **libexpat could allow a remote attacker to execute arbitrary code on the system, caused by an integer overflow in the copyString function. By sending an overly-long argument, an attacker could overflow a buffer and execute arbitrary code on the system. \nCVSS Base score: 7.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/219946](<https://exchange.xforce.ibmcloud.com/vulnerabilities/219946>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L) \n \n** CVEID: **[CVE-2022-28327](<https://vulners.com/cve/CVE-2022-28327>) \n** DESCRIPTION: **Golang Go is vulnerable to a denial of service, caused by improper input validaiton by the generic P-256 feature in crypto/elliptic. By sending a specially-crafted request with long scalar input, a remote attacker could exploit this vulnerability to cause a panic on the system. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/224871](<https://exchange.xforce.ibmcloud.com/vulnerabilities/224871>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-24675](<https://vulners.com/cve/CVE-2022-24675>) \n** DESCRIPTION: **Golang Go is vulnerable to a denial of service, caused by a stack-based buffer overflow in encoding/pem in the Decode feature. By sending a specially-crafted request, a remote attacker could exploit this vulnerability to cause the program to crash. \nCVSS Base score: 7.5 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/224866](<https://exchange.xforce.ibmcloud.com/vulnerabilities/224866>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) \n \n** CVEID: **[CVE-2022-22393](<https://vulners.com/cve/CVE-2022-22393>) \n** DESCRIPTION: **IBM WebSphere Application Server Liberty 17.0.0.3 through 22.0.0.5 , with the adminCenter-1.0 feature configured, could allow an authenticated user to issue a request to obtain the status of HTTP/HTTPS ports which are accessible by the application server. IBM X-Force ID: 222078. \nCVSS Base score: 3.1 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/222078](<https://exchange.xforce.ibmcloud.com/vulnerabilities/222078>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:N) \n \n** CVEID: **[CVE-2022-22475](<https://vulners.com/cve/CVE-2022-22475>) \n** DESCRIPTION: **IBM WebSphere Application Server Liberty and Open Liberty 17.0.0.3 through 22.0.0.5 are vulnerable to identity spoofing by an authenticated user. IBM X-Force ID: 225603. \nCVSS Base score: 7.1 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/225603](<https://exchange.xforce.ibmcloud.com/vulnerabilities/225603>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:L) \n \n** CVEID: **[CVE-2022-29526](<https://vulners.com/cve/CVE-2022-29526>) \n** DESCRIPTION: **Golang Go could allow a remote attacker to obtain sensitive information, caused by a flaw in the Faccessat function when called with a non-zero flags parameter. By sending a specially-crafted request, an attacker could exploit this vulnerability to obtain accessible file information, and use this information to launch further attacks against the affected system. \nCVSS Base score: 5.3 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilities/229593](<https://exchange.xforce.ibmcloud.com/vulnerabilities/229593>) for the current score. \nCVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N) \n \n** CVEID: **[CVE-2021-40528](<https://vulners.com/cve/CVE-2021-40528>) \n** DESCRIPTION: **GnuPG Libgcrypt could allow a remote attacker to bypass security restrictions, caused by a flaw in the ElGamal implementation. By sending a specially-crafted request, an attacker could exploit this vulnerability to perform a cross-configuration attack against OpenPGP. \nCVSS Base score: 5.9 \nCVSS Temporal Score: See: [ https://exchange.xforce.ibmcloud.com/vulnerabilit
Updated curl packages fix security vulnerability
