7.5 High
CVSS3
Attack Vector
NETWORK
Attack Complexity
LOW
Privileges Required
NONE
User Interaction
NONE
Scope
UNCHANGED
Confidentiality Impact
NONE
Integrity Impact
NONE
Availability Impact
HIGH
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
0.001 Low
EPSS
Percentile
48.5%
A Missing Release of Memory after Effective Lifetime vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated network based attacker to cause a Denial of Service (DoS). On all Junos platforms, the Kernel Routing Table (KRT) queue can get stuck due to a memory leak triggered by interface flaps or route churn leading to RIB and PFEs getting out of sync. The memory leak causes RTNEXTHOP/route and next-hop memory pressure issue and the KRT queue will eventually get stuck with the error- ‘ENOMEM – Cannot allocate memory’. The out-of-sync state between RIB and FIB can be seen with the “show route” and “show route forwarding-table” command. This issue will lead to failures for adding new routes. The KRT queue status can be checked using the CLI command “show krt queue”: user@host > show krt state High-priority add queue: 1 queued ADD nhtype Router index 0 (31212) error ‘ENOMEM – Cannot allocate memory’ kqp ‘0x8ad5e40’ The following messages will be observed in /var/log/messages, which indicate high memory for routes/nexthops: host rpd[16279]: RPD_RT_HWM_NOTICE: New RIB highwatermark for routes: 266 [2022-03-04 05:06:07] host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host kernel: rts_veto_net_delayed_unref_limit: Route/nexthop memory is severe pressure. User Application to perform recovery actions. O p 8 err 12, rtsm_id 0:-1, msg type 10, veto simulation: 0. host kernel: rts_veto_net_delayed_unref_limit: Memory usage of M_RTNEXTHOP type = (806321208) Max size possible for M_RTNEXTHOP type = (689432176) Current delayed unref = (0), Max delayed unref on this platform = (120000) Current delayed weight unref = (0) Max delayed weight unref on this platform = (400000) curproc = rpd. This issue affects: Juniper Networks Junos OS 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2-S1, 21.3R3; 21.4 versions prior to 21.4R1-S2, 21.4R2; This issue does not affect Juniper Networks Junos OS versions prior to 21.2R1.
[
{
"product": "Junos OS",
"vendor": "Juniper Networks",
"versions": [
{
"lessThan": "21.2R1",
"status": "unaffected",
"version": "unspecified",
"versionType": "custom"
},
{
"lessThan": "21.2R3",
"status": "affected",
"version": "21.2",
"versionType": "custom"
},
{
"lessThan": "21.3R2-S1, 21.3R3",
"status": "affected",
"version": "21.3",
"versionType": "custom"
},
{
"lessThan": "21.4R1-S2, 21.4R2",
"status": "affected",
"version": "21.4",
"versionType": "custom"
}
]
}
]